7 years agofirmware loader: document kernel direct loading
Ming Lei [Wed, 24 Oct 2012 02:49:33 +0000]
firmware loader: document kernel direct loading

This patch adds description on recently introduced direct firmware
loading by Linus.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoehci: Add yet-another Lucid nohandoff pci quirk
Anisse Astier [Tue, 9 Oct 2012 10:22:37 +0000]
ehci: Add yet-another Lucid nohandoff pci quirk

Board name changed on another shipping Lucid tablet.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions
Anisse Astier [Tue, 9 Oct 2012 10:22:36 +0000]
ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions

BIOS vendors keep changing the BIOS versions. Only match the beginning
of the string to match all Lucid tablets with board name M11JB.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mos7840: fix port_probe flow
Johan Hovold [Thu, 25 Oct 2012 16:56:35 +0000]
USB: mos7840: fix port_probe flow

Remove temporary do-while(0) loop used to keep changes minimal.

Fixup indentation, remove some line breaks, and replace break with goto
to maintain flow.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mos7840: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 16:56:34 +0000]
USB: mos7840: fix port-data memory leak

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the indentation was kept intact using a do-while(0) in order
to facilitate review. A follow-up patch will remove it.

Compile-only tested.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mos7840: remove invalid disconnect handling
Johan Hovold [Thu, 25 Oct 2012 16:56:33 +0000]
USB: mos7840: remove invalid disconnect handling

Remove private zombie flag used to signal disconnect and to prevent
control urb from being submitted from interrupt urb completion handler.

The control urb will not be re-submitted as both the control urb and the
interrupt urb is killed on disconnect.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mos7840: remove NULL-urb submission
Johan Hovold [Thu, 25 Oct 2012 16:56:32 +0000]
USB: mos7840: remove NULL-urb submission

The private int_urb is never allocated so the submission from the
control completion handler will always fail. Remove this odd piece of
broken code.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agox86: efi: Turn off efi_enabled after setup on mixed fw/kernel
Olof Johansson [Wed, 24 Oct 2012 17:00:44 +0000]
x86: efi: Turn off efi_enabled after setup on mixed fw/kernel

When 32-bit EFI is used with 64-bit kernel (or vice versa), turn off
efi_enabled once setup is done. Beyond setup, it is normally used to
determine if runtime services are available and we will have none.

This will resolve issues stemming from efivars modprobe panicking on a
32/64-bit setup, as well as some reboot issues on similar setups.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45991

Reported-by: Marko Kohtala <marko.kohtala@gmail.com>
Reported-by: Maxim Kammerer <mk@dee.su>
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: stable@kernel.org # 3.4 - 3.6
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

7 years agoUSB: qcserial: fix interface-data memory leak in error path
Johan Hovold [Thu, 25 Oct 2012 13:42:41 +0000]
USB: qcserial: fix interface-data memory leak in error path

Move interface data allocation to attach so that it is deallocated
should usb-serial probe fail.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: option: fix interface-data memory leak in error path
Johan Hovold [Thu, 25 Oct 2012 13:42:40 +0000]
USB: option: fix interface-data memory leak in error path

Move interface data allocation to attach so that it is deallocated
should usb-serial probe fail.

Note that the usb device id is stored at probe so that it can be used
in attach to determine send-setup blacklisting.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: ipw: fix interface-data memory leak in error path
Johan Hovold [Thu, 25 Oct 2012 13:42:39 +0000]
USB: ipw: fix interface-data memory leak in error path

Move interface data allocation to attach so that it is deallocated
should usb-serial probe fail.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mos7840: fix port-device leak in error path
Johan Hovold [Thu, 25 Oct 2012 11:35:10 +0000]
USB: mos7840: fix port-device leak in error path

The driver set the usb-serial port pointers to NULL on errors in attach,
effectively preventing usb-serial core from decrementing the port ref
counters and releasing the port devices and associated data.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mos7840: fix urb leak at release
Johan Hovold [Thu, 25 Oct 2012 11:35:09 +0000]
USB: mos7840: fix urb leak at release

Make sure control urb is freed at release.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: sierra: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 08:29:19 +0000]
USB: sierra: fix port-data memory leak

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note also that urb-count for multi-port interfaces has not been changed
even though the usb-serial port number is now determined from the port
and interface minor numbers.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: sierra: fix memory leak in probe error path
Johan Hovold [Thu, 25 Oct 2012 08:29:18 +0000]
USB: sierra: fix memory leak in probe error path

Move interface data allocation to attach so that it is deallocated on
errors in usb-serial probe.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: sierra: fix memory leak in attach error path
Johan Hovold [Thu, 25 Oct 2012 08:29:17 +0000]
USB: sierra: fix memory leak in attach error path

Make sure port private data is deallocated on errors in attach.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: usb-wwan: fix multiple memory leaks in error paths
Johan Hovold [Thu, 25 Oct 2012 08:29:16 +0000]
USB: usb-wwan: fix multiple memory leaks in error paths

Fix port-data memory leak in usb-serial probe error path by moving port
data allocation to port_probe.

Since commit a1028f0abf ("usb: usb_wwan: replace release and disconnect
with a port_remove hook") port data is deallocated in port_remove. This
leaves a possibility for memory leaks if usb-serial probe fails after
attach but before the port in question has been successfully registered.

Note that this patch also fixes two additional memory leaks in the error
path of attach should port initialisation fail for any port as the urbs
were never freed and neither was the data of any of the successfully
initialised ports.

Compile-only tested.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: keyspan: fix NULL-pointer dereferences and memory leaks
Johan Hovold [Thu, 25 Oct 2012 08:29:15 +0000]
USB: keyspan: fix NULL-pointer dereferences and memory leaks

Fix NULL-pointer dereference at release by moving port data allocation
and deallocation to port_probe and port_remove.

Fix NULL-pointer dereference at disconnect by stopping port urbs at
port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer accessible at
disconnect or release.

Note that this patch also fixes port and interface-data memory leaks in
the error path of attach should port initialisation fail for any port.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mct_u232: fix broken close
Johan Hovold [Thu, 25 Oct 2012 08:29:14 +0000]
USB: mct_u232: fix broken close

Make sure generic close is called at close.

The driver relies on the generic write implementation but did not call
generic close.

Note that the call to kill the read urb is not redundant, as mct_u232
uses an interrupt urb from the second port as the read urb and that
generic close therefore fails to kill it.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mct_u232: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 08:29:13 +0000]
USB: mct_u232: fix port-data memory leak

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the write waitqueue was initialised but never used.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: opticon: fix memory leak in error path
Johan Hovold [Thu, 25 Oct 2012 08:29:12 +0000]
USB: opticon: fix memory leak in error path

Fix memory leak in write error path.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: opticon: fix DMA from stack
Johan Hovold [Thu, 25 Oct 2012 08:29:11 +0000]
USB: opticon: fix DMA from stack

Make sure to allocate the control-message buffer dynamically as some
platforms cannot do DMA from stack.

Note that only the first byte of the old buffer was used.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: quatech2: fix io after disconnect
Johan Hovold [Thu, 25 Oct 2012 08:29:10 +0000]
USB: quatech2: fix io after disconnect

Make sure no control urb is submitted during close after a disconnect by
checking the disconnected flag.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: quatech2: fix close and disconnect urb handling
Johan Hovold [Thu, 25 Oct 2012 08:29:09 +0000]
USB: quatech2: fix close and disconnect urb handling

Kill urbs unconditionally at close and disconnect.

Note that URB status is not valid outside of completion handler.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: quatech2: fix port-data memory leaks
Johan Hovold [Thu, 25 Oct 2012 08:29:08 +0000]
USB: quatech2: fix port-data memory leaks

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that this also fixes memory leaks in the error path of attach where
the write urbs were not freed on errors.

Make sure all interface-data deallocation is done in release by moving
the read urb deallocation from disconnect.

Note that the write urb is killed during close so that the call in
disconnect was superfluous.

Compile-only tested.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: quatech2: fix memory leak in error path
Johan Hovold [Thu, 25 Oct 2012 08:29:07 +0000]
USB: quatech2: fix memory leak in error path

Fix memory leak in attach error path where the read urb was never freed.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: omninet: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 08:29:06 +0000]
USB: omninet: fix port-data memory leak

Fix port-data memory leak by replacing attach and release with
port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: mos7720: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 08:29:05 +0000]
USB: mos7720: fix port-data memory leak

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that this patch also fixes a second port-data memory leak in the
error path of attach, should parallel-port initialisation fail.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: digi_acceleport: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 08:29:04 +0000]
USB: digi_acceleport: fix port-data memory leak

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the oob port is never registered as a port device and should
thus be handled in attach and release.

Compile-only tested.

Cc: Peter Berger <pberger@brimson.com>
Cc: Al Borchers <alborchers@steinerpoint.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: ch341: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 08:29:03 +0000]
USB: ch341: fix port-data memory leak

Fix port-data memory leak by moving port data allocation to port_probe
and actually implementing deallocation.

Note that this driver has never even bothered to try to deallocate it's
port data...

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: whiteheat: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 08:29:02 +0000]
USB: whiteheat: fix port-data memory leak

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the fifth port (command port) is never registered as a
port device and thus should be handled in attach and release.

Compile-only tested.

Cc: <support@connecttech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: whiteheat: fix memory leak in error path
Johan Hovold [Thu, 25 Oct 2012 08:29:01 +0000]
USB: whiteheat: fix memory leak in error path

Make sure command buffer is deallocated in case of errors during attach.

Cc: <support@connecttech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: metro-usb: fix io after disconnect
Johan Hovold [Thu, 25 Oct 2012 08:29:00 +0000]
USB: metro-usb: fix io after disconnect

Make sure no control urb is submitted during close after a disconnect by
checking the disconnected flag.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoUSB: metro-usb: fix port-data memory leak
Johan Hovold [Thu, 25 Oct 2012 08:28:59 +0000]
USB: metro-usb: fix port-data memory leak

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the call to metrousb_clean (close) in shutdown was redundant.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoMerge remote-tracking branches 'asoc/fix/ux500' and 'asoc/fix/wm8994' into for-3.7
Mark Brown [Thu, 25 Oct 2012 16:36:02 +0000]
Merge remote-tracking branches 'asoc/fix/ux500' and 'asoc/fix/wm8994' into for-3.7

7 years agoARM: socfpga: Fix socfpga compilation with early_printk() enabled
Pavel Machek [Wed, 17 Oct 2012 18:16:48 +0000]
ARM: socfpga: Fix socfpga compilation with early_printk() enabled

This fixes early_printk() compilation for
socfpga. (senduart/busyuart/waituart were missing). It does that by
making Picochip code generic.

Signed-off-by: Pavel Machek <pavel@denx.de>
Acked-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 years agoARM: SPEAr: Remove unused empty files
Viresh Kumar [Thu, 25 Oct 2012 14:34:18 +0000]
ARM: SPEAr: Remove unused empty files

Few empty files (spear1310_misc_regs.h and spear1340_misc_regs.h) are created by
commit b31e23726 "SPEAr13xx: Add header files".

Don't know how they got added, obviously my fault :)
But nobody could even catch them in reviews.

Remove them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 years agoMerge tag 'omap-for-v3.7-rc2/fixes-signed' of git://git.kernel.org/pub/scm/linux...
Arnd Bergmann [Thu, 25 Oct 2012 14:25:25 +0000]
Merge tag 'omap-for-v3.7-rc2/fixes-signed' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren <tony@atomide.com>:

Timer fix for am33xx, runtime PM fix for UART, audio McBSP fixes,
mux and pinctrl fixes, and Beagle OPP fix.

* tag 'omap-for-v3.7-rc2/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500
  ARM: OMAP3: Beagle: fix OPP customization and initcall ordering
  ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals.
  ARM: OMAP2+: Fix location of select PINCTRL
  ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio
  ARM: OMAP2: UART: fix console UART mismatched runtime PM status
  ARM: OMAP3: PM: apply part of the erratum i582 workaround

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 years agoMAINTAINERS: Add arm-soc tree entry
Stephen Boyd [Wed, 24 Oct 2012 18:00:29 +0000]
MAINTAINERS: Add arm-soc tree entry

Document the arm-soc tree in the maintainers file so that
developers know how arm SoC development is structured.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 years agoMerge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes
Arnd Bergmann [Thu, 25 Oct 2012 13:57:40 +0000]
Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixes

Patches from Sascha Hauer <s.hauer@pengutronix.de>:

ARM i.MX fixes for 3.7-rc

* tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6:
  ARM i.MX25: Fix PWM per clock lookups
  ARM i.MX25 clk: Fix nfc_ipg_per parent
  ARM i.MX25: Fix lcdc_ipg_per parent clock
  ARM: mxc: platform-mxc-mmc: Fix register region size
  ARM: imx: clk-imx27: Fix divider width field
  ARM: imx: fix the return value check in imx_clk_busy_divider()
  ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60
  ARM: imx: fix return value check in imx3_init_l2x0()

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 years agoMerge branch 'for-rcs-3.7' of git://git.linaro.org/people/ljones/linux-3.0-ux500...
Arnd Bergmann [Thu, 25 Oct 2012 13:49:01 +0000]
Merge branch 'for-rcs-3.7' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into fixes

* 'for-rcs-3.7' of git://git.linaro.org/people/ljones/linux-3.0-ux500:
  ARM: ux500: Correct SDI5 address and add some format changes
  ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT
  ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 years agoMerge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
Arnd Bergmann [Thu, 25 Oct 2012 13:47:19 +0000]
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes

From  Nicolas Ferre <nicolas.ferre@atmel.com>:

A mix of typos and critical fixes.
The most important ones are a duplicated definition of a Kconfig
variable and the handling of external interrupts for non-DT case.
The new at91sam9g10 was suffering a recognition issue due to an ID
mis-interpreted: this was leading to a kernel panic.

* tag 'at91-fixes' of git://github.com/at91linux/linux-at91: (257 commits)
  ARM: at91: drop duplicated config SOC_AT91SAM9 entry
  ARM: at91/i2c: change id to let i2c-at91 work
  ARM: at91/i2c: change id to let i2c-gpio work
  ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.
  ARM: at91: fix external interrupt specification in board code
  ARM: at91: fix external interrupts in non-DT case
  ARM: at91: at91sam9g10: fix SOC type detection
  ARM: at91/tc: fix typo in the DT document

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 years agoARM: dts: mxs: add the "clock-names" for gpmi-nand
Huang Shijie [Wed, 10 Oct 2012 10:27:09 +0000]
ARM: dts: mxs: add the "clock-names" for gpmi-nand

The current DT nodes for mx23/mx28 miss the `clocks-names` item for gpmi-nand.
So the gpmi-nand driver could not find the proper clock.

This patch fixes this issue.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 years agoARM: ux500: Correct SDI5 address and add some format changes
Lee Jones [Wed, 24 Oct 2012 10:10:05 +0000]
ARM: ux500: Correct SDI5 address and add some format changes

Here we fix a simple copy and paste error and bring some node
spaces back into line with the remainder of the tree.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

7 years agoARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT
Lee Jones [Wed, 24 Oct 2012 10:07:02 +0000]
ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT

Now the Nomadik I2C driver has been converted to an AMBA one, we
are required to provide the Primecell IDs via platform code. When
booting with DT enabled these have to be specified in the device
nodes. We do that here.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

7 years agoARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE
Lee Jones [Tue, 23 Oct 2012 14:55:05 +0000]
ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE

This patch fixes the build error below:

arch/arm/mach-ux500/cpu.c: In function ‘ux500_init_irq’:
arch/arm/mach-ux500/cpu.c:55:2: error: invalid use of undefined type ‘struct irq_chip’
arch/arm/mach-ux500/cpu.c:55:24: error: ‘IRQCHIP_SKIP_SET_WAKE’ undeclared (first use in this function)
arch/arm/mach-ux500/cpu.c:55:24: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/mach-ux500/cpu.c:55:48: error: ‘IRQCHIP_MASK_ON_SUSPEND’ undeclared (first use in this function)

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

7 years agovhost: fix mergeable bufs on BE hosts
Michael S. Tsirkin [Wed, 24 Oct 2012 18:37:51 +0000]
vhost: fix mergeable bufs on BE hosts

We copy head count to a 16 bit field, this works by chance on LE but on
BE guest gets 0. Fix it up.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agogianfar_ptp: use iomem, not ioports resource tree in probe
Wei Yang [Wed, 24 Oct 2012 05:21:36 +0000]
gianfar_ptp: use iomem, not ioports resource tree in probe

When using a 36 bit dtb file, the driver complains "resource busy".

Investigating the source of the message leads one to the
gianfar_ptp_probe function.

Since the type of the device resource requested in this function
is IORESOURCE_MEM, it should use "iomem_resource" instead of
"ioports_resource".

Signed-off-by: Wei Yang <Wei.Yang@windriver.com>
Cc: Claudiu Manoil <claudiu.manoil@freescale.com>
Cc: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'fixes-for-3.7' of git://gitorious.org/linux-can/linux-can
David S. Miller [Thu, 25 Oct 2012 03:16:49 +0000]
Merge branch 'fixes-for-3.7' of git://gitorious.org/linux-can/linux-can

Marc Kleine-Budde says:

====================
here are two patches for the v3.7 release cycle. A patch by Wolfgang Grandegger
for the flexcan driver, which switches off a workaround on the imx6q that is
not needed, because the hardware is not affected by that bug. And a patch by
Stephane Grosjean which updates the pci device table for the peak pci sja1000
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoipv6: Set default hoplimit as zero.
Li RongQing [Wed, 24 Oct 2012 06:01:18 +0000]
ipv6: Set default hoplimit as zero.

Commit a02e4b7dae4551(Demark default hoplimit as zero) only changes the
hoplimit checking condition and default value in ip6_dst_hoplimit, not
zeros all hoplimit default value.

Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as
const, cause as a37e6e344910(net: force dst_default_metrics to const
section)

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoNET_VENDOR_TI: make available for am33xx as well
Peter Korsgaard [Tue, 23 Oct 2012 12:11:55 +0000]
NET_VENDOR_TI: make available for am33xx as well

The cpsw/davinci mdio ip cores are present on am33xx, so make NET_VENDOR_TI
visible for it as well.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agopch_gbe: fix error handling in pch_gbe_up()
Veaceslav Falico [Tue, 23 Oct 2012 04:54:34 +0000]
pch_gbe: fix error handling in pch_gbe_up()

If we fail to allocate rx buffers pool by any reason, we'll just return
with an error, however we've previously successfully requested an irq. Fix
this by releasing the irq before returning the error.

Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge tag 'spi-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc
Linus Torvalds [Thu, 25 Oct 2012 01:00:17 +0000]
Merge tag 'spi-linus' of git://git./linux/kernel/git/broonie/misc

Pull spi fixes from Mark Brown:
 "A bunch of fixes here, mostly minor except for the pl022 which has
  just been a bit of a shambles all round, the recent runtime PM changes
  have as far as I can tell never worked so they're just getting thrown
  out."

* tag 'spi-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/pl022: Revert recent runtime PM changes
  spi: tsc2005: delete soon-obsolete e-mail address
  spi: spi-rspi: fix build error for the latest shdma driver

7 years agoMerge tag 'iommu-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 25 Oct 2012 00:05:21 +0000]
Merge tag 'iommu-fixes-v3.7-rc2' of git://git./linux/kernel/git/joro/iommu

Pull IOMMU fixes from Joerg Roedel:
 "Two fixes this time:

   1. Another fix for a broken BIOS to detect when AMD IOMMU interrupt
      remapping can not work reliably
   2. Typo fix for NVidia IOMMU driver"

* tag 'iommu-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/tegra: smmu: Fix deadly typo
  iommu/amd: Work around wrong IOAPIC device-id in IVRS table

7 years agoMerge tag 'pinctrl-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Thu, 25 Oct 2012 00:01:16 +0000]
Merge tag 'pinctrl-v3.7-rc3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 "This fixes a few pinctrl problems seen since v3.7-rc1:
   - Section tagging for init code
   - Use proper pointers to lookup struct device * in the bcm2835
     (a.k.a.  Raspberry Pi)
   - Remove duplicate #includes
   - Fix bad return values in errorpath
   - Remove extraneous pull function from the sirf driver causing build
     errors
   - Provide compilation stubs for the Nomadik pinctrl driver when used
     with legacy systems without PRCMU units
   - Various irqdomain fixes in the Nomadik driver as predicted
   - Various smallish bugs in the Tegra driver, most also targeted for
     stable
   - Removed a deadlocking mutex in the groups debugfs show function"

* tag 'pinctrl-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl/nomadik: pass DT node to the irqdomain
  pinctrl/nomadik: use zero as default irq_start
  pinctrl: fix missing unlock on error in pinctrl_groups_show()
  pinctrl/nomadik: use irq_create_mapping()
  pinctrl: remove mutex lock in groups show
  pinctrl: tegra: correct bank for pingroup and drv pingroup
  pinctrl: tegra: set low power mode bank width to 2
  dt: Document: correct tegra20/30 pinctrl slew-rate name

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Wed, 24 Oct 2012 23:58:20 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull apparmor bugfix from James Morris.

Fix a possibly unbounded recursion by iterating over the entries instead.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  apparmor: fix IRQ stack overflow during free_profile

7 years agoMerge tag 'edac_scrubrates_fix' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 24 Oct 2012 23:36:36 +0000]
Merge tag 'edac_scrubrates_fix' of git://git./linux/kernel/git/bp/bp

Pull amd64_edac fix from Borislav Petkov:
 "An array out-of-bounds fix from Andrew when setting the scrub rate of
  the memory controller."

* tag 'edac_scrubrates_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac:__amd64_set_scrub_rate(): avoid overindexing scrubrates[]

7 years agoMerge branch 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Wed, 24 Oct 2012 23:35:13 +0000]
Merge branch 'for-3.7-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fixes from Tejun Heo:
 "This pull request contains three fixes.

  Two are reverts of task_lock() removal in cgroup fork path.  The
  optimizations incorrectly assumed that threadgroup_lock can protect
  process forks (as opposed to thread creations) too.  Further cleanup
  of cgroup fork path is scheduled.

  The third fixes cgroup emptiness notification loss."

* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Revert "cgroup: Remove task_lock() from cgroup_post_fork()"
  Revert "cgroup: Drop task_lock(parent) on cgroup_fork()"
  cgroup: notify_on_release may not be triggered in some cases

7 years agoMerge branch 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Linus Torvalds [Wed, 24 Oct 2012 23:33:22 +0000]
Merge branch 'for-3.7-fixes' of git://git./linux/kernel/git/tj/wq

Pull workqueue fix from Tejun Heo:
 "This pull request contains one patch from Dan Magenheimer to fix
  cancel_delayed_work() regression introduced by its reimplementation
  using try_to_grab_pending().  The reimplementation made it incorrectly
  return %true when the work item is idle.

  There aren't too many consumers of the return value but it broke at
  least ramster."

* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: cancel_delayed_work() should return %false if work item is idle

7 years agostaging: tidspbridge: delete unused mmu functions
Omar Ramirez Luna [Wed, 24 Oct 2012 22:09:20 +0000]
staging: tidspbridge: delete unused mmu functions

This should get rid of warnings of the type:

warning: passing argument 1 of '' discards qualifiers from pointer target type
 note: expected 'void *' but argument is of type 'const void *'

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: tidspbridge: ioremap physical address of the stack segment in shm
Omar Ramirez Luna [Wed, 24 Oct 2012 22:09:19 +0000]
staging: tidspbridge: ioremap physical address of the stack segment in shm

Due to data type change, readl can no longer receive a u32.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: tidspbridge: ioremap dsp sync addr
Omar Ramirez Luna [Wed, 24 Oct 2012 22:09:18 +0000]
staging: tidspbridge: ioremap dsp sync addr

Change the type of sync_addr to 'void __iomem *' and ioremap the
physical address in the shared memory so we can access it using
_raw_*. While at it, drop 'dw_' prefix.

Fix the warning associated with dsp's sync_addr:

warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast
../io.h:88: note: expected 'volatile void *' but argument is of type 'u32'

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: tidspbridge: change type to __iomem for per and core addresses
Omar Ramirez Luna [Wed, 24 Oct 2012 22:09:17 +0000]
staging: tidspbridge: change type to __iomem for per and core addresses

Currently per_pm_base and core_pm_base are declared as u32, however
_raw_* changed the data type, since:

195bbca ARM: 7500/1: io: avoid writeback addressing modes for __raw_ accessors

This should fix warnings for per and core accesses:

warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast
../io.h:88: note: expected 'volatile void *' but argument is of type 'u32'

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: tidspbridge: drop const from custom mmu implementation
Omar Ramirez Luna [Wed, 24 Oct 2012 22:09:16 +0000]
staging: tidspbridge: drop const from custom mmu implementation

Custom mmu functions receive a 'const void __iomem *', all the
callers pass a 'void __iomem *', so drop the const to fix the
warnings like:

warning: passing argument 2 of '__raw_writel' discards qualifiers from pointer target type
../io.h:88: note: expected 'volatile void *' but argument is of type 'const void *'

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: tidspbridge: request the right irq for mmu
Omar Ramirez Luna [Wed, 24 Oct 2012 22:09:15 +0000]
staging: tidspbridge: request the right irq for mmu

Requested irq for mmu is currently conflicting with a DMA irq
due to recent changes to irq header files, now the offset for the
start of the interrupt controller numbering has changed.

This should be removed during a future migration to omap-iommu,
for now it is hardcoded.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agosysfs: sysfs_pathname/sysfs_add_one: Use strlcat() instead of strcat()
Geert Uytterhoeven [Sat, 29 Sep 2012 20:23:19 +0000]
sysfs: sysfs_pathname/sysfs_add_one: Use strlcat() instead of strcat()

The warning check for duplicate sysfs entries can cause a buffer overflow
when printing the warning, as strcat() doesn't check buffer sizes.
Use strlcat() instead.

Since strlcat() doesn't return a pointer to the passed buffer, unlike
strcat(), I had to convert the nested concatenation in sysfs_add_one() to
an admittedly more obscure comma operator construct, to avoid emitting code
for the concatenation if CONFIG_BUG is disabled.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agodynamic_debug: Remove unnecessary __used
Joe Perches [Thu, 18 Oct 2012 19:07:03 +0000]
dynamic_debug: Remove unnecessary __used

The __used attribute prevents gcc from eliminating
unnecessary, otherwise optimized away, metadata for
debugging logging messages.

Remove the __used attribute.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoDrivers: hv: Cleanup error handling in vmbus_open()
K. Y. Srinivasan [Fri, 12 Oct 2012 20:22:42 +0000]
Drivers: hv: Cleanup error handling in vmbus_open()

Fix a memory leak  in the error handling path in the function vmbus_open().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Jason Wang <jasowang@redhat.com>
Cc: Stable <stable@vger.kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: ipack: add missing include (implicit declaration of function 'kfree')
Sergei Trofimovich [Wed, 24 Oct 2012 10:43:47 +0000]
staging: ipack: add missing include (implicit declaration of function 'kfree')

On ARCH=alpha make allmodconfig:

linux-2.6/drivers/staging/ipack/bridges/tpci200.c: In function 'tpci200_free_irq':
linux-2.6/drivers/staging/ipack/bridges/tpci200.c:188:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
linux-2.6/drivers/staging/ipack/bridges/tpci200.c: In function 'tpci200_request_irq':
linux-2.6/drivers/staging/ipack/bridges/tpci200.c:215:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]

Fixed by adding <linux/slab.h> header

CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
CC: Jens Taprogge <jens.taprogge@taprogge.org>
CC: "Miguel Gómez" <magomez@igalia.com>
CC: devel@driverdev.osuosl.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agousb-storage: add unusual_devs entry for Casio EX-N1 digital camera
Michael Shigorin [Mon, 22 Oct 2012 09:18:56 +0000]
usb-storage: add unusual_devs entry for Casio EX-N1 digital camera

This commit sets removable subclass for Casio EX-N1 digital camera.

The patch has been tested within an ALT Linux kernel:
http://git.altlinux.org/people/led/packages/?p=kernel-image-3.0.git;a=commitdiff;h=c0fd891836e89fe0c93a4d536a59216d90e4e3e7

See also https://bugzilla.kernel.org/show_bug.cgi?id=49221

Signed-off-by: Oleksandr Chumachenko <ledest@gmail.com>
Signed-off-by: Michael Shigorin <mike@osdn.org.ua>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agox86, mm: Find_early_table_space based on ranges that are actually being mapped
Jacob Shin [Wed, 24 Oct 2012 19:24:44 +0000]
x86, mm: Find_early_table_space based on ranges that are actually being mapped

Current logic finds enough space for direct mapping page tables from 0
to end. Instead, we only need to find enough space to cover mr[0].start
to mr[nr_range].end -- the range that is actually being mapped by
init_memory_mapping()

This is needed after 1bbbbe779aabe1f0768c2bf8f8c0a5583679b54a, to address
the panic reported here:

  https://lkml.org/lkml/2012/10/20/160
  https://lkml.org/lkml/2012/10/21/157

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/20121024195311.GB11779@jshin-Toonie
Tested-by: Tom Rini <trini@ti.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

7 years agoworkqueue: cancel_delayed_work() should return %false if work item is idle
Dan Magenheimer [Thu, 18 Oct 2012 23:31:37 +0000]
workqueue: cancel_delayed_work() should return %false if work item is idle

57b30ae77b ("workqueue: reimplement cancel_delayed_work() using
try_to_grab_pending()") made cancel_delayed_work() always return %true
unless someone else is also trying to cancel the work item, which is
broken - if the target work item is idle, the return value should be
%false.

try_to_grab_pending() indicates that the target work item was idle by
zero return value.  Use it for return.  Note that this brings
cancel_delayed_work() in line with __cancel_work_timer() in return
value handling.

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <444a6439-b1a4-4740-9e7e-bc37267cfe73@default>

7 years agoRevert "serial: omap: fix software flow control"
Felipe Balbi [Tue, 16 Oct 2012 14:09:22 +0000]
Revert "serial: omap: fix software flow control"

This reverts commit 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6
(serial: omap: fix software flow control).

As Russell has pointed out, that commit isn't fixing
Software Flow Control at all, and it actually makes
it even more broken.

It was agreed to revert this commit and use Russell's
latest UART patches instead.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agox86, mm: Use memblock memory loop instead of e820_RAM
Yinghai Lu [Mon, 22 Oct 2012 23:35:18 +0000]
x86, mm: Use memblock memory loop instead of e820_RAM

We need to handle E820_RAM and E820_RESERVED_KERNEL at the same time.

Also memblock has page aligned range for ram, so we could avoid mapping
partial pages.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.com
Acked-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>

7 years agox86, mm: Trim memory in memblock to be page aligned
Yinghai Lu [Mon, 22 Oct 2012 23:35:18 +0000]
x86, mm: Trim memory in memblock to be page aligned

We will not map partial pages, so need to make sure memblock
allocation will not allocate those bytes out.

Also we will use for_each_mem_pfn_range() to loop to map memory
range to keep them consistent.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.com
Acked-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>

7 years agoUSB: serial: Fix memory leak in sierra_release()
Lennart Sorensen [Wed, 24 Oct 2012 14:23:09 +0000]
USB: serial: Fix memory leak in sierra_release()

I found a memory leak in sierra_release() (well sierra_probe() I guess)
that looses 8 bytes each time the driver releases a device.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agob43: Fix oops on unload when firmware not found
Larry Finger [Wed, 24 Oct 2012 13:57:16 +0000]
b43: Fix oops on unload when firmware not found

When b43 fails to find firmware when loaded, a subsequent unload will
oops due to calling ieee80211_unregister_hw() when the corresponding
register call was never made.

Commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 fixed the same problem
for b43legacy.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Markus Kanet <dvmailing@gmx.eu>
Cc: Stable <stable@vger.kernel.org> [V3.3.0+ (the patch will need to be refactored)]
Cc: Markus Kanet <dvmailing@gmx.eu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agomwifiex: clean up scan state on error
Bing Zhao [Sat, 20 Oct 2012 02:02:00 +0000]
mwifiex: clean up scan state on error

De-reference and deallocate scan state on failure.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Paul Stewart <pstew@chromium.org>
Tested-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Ryan Cairns <rtc@chromium.org>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agomwifiex: return -EBUSY if specific scan request cannot be honored
Bing Zhao [Sat, 20 Oct 2012 02:01:59 +0000]
mwifiex: return -EBUSY if specific scan request cannot be honored

Previous patch "mwifiex: return -EBUSY if scan request cannot.."
corrected regular scan request only. There is another case for
specific scan that needs the same handling.

Also, removed !req_ssid check as it has already been validated
by caller.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Ryan Cairns <rtc@chromium.org>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agobrcmfmac: fix potential NULL dereference
Yuanhan Liu [Thu, 18 Oct 2012 10:10:56 +0000]
brcmfmac: fix potential NULL dereference

Fix a samtch warnings catched by Fengguang's 0-DAY system:
+ drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:3572 brcmf_cfg80211_sched_scan_start() error: we previously assumed 'request' could be null (see line 3571)

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoRevert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"
Felix Fietkau [Wed, 17 Oct 2012 11:50:43 +0000]
Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz"

This reverts commit a240dc7b3c7463bd60cf0a9b2a90f52f78aae0fd.

This commit is reducing tx power by at least 10 db on some devices,
e.g. the Buffalo WZR-HP-G450H.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Cc: rmanohar@qca.qualcomm.com
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k_htc: Add PID/VID for a Ubiquiti WiFiStation
Mohammed Shafi Shajakhan [Tue, 16 Oct 2012 16:01:49 +0000]
ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation

Roger says, Ubiquiti produce 2 versions of their WiFiStation USB adapter.  One
has an internal antenna, the other has an external antenna and
name suffix EXT.  They have separate USB ids and in distribution
openSUSE 12.2 (kernel 3.4.6), file /usr/share/usb.ids shows:

  0cf3  Atheros Communications, Inc.
       ...
       b002  Ubiquiti WiFiStation 802.11n [Atheros AR9271]
       b003  Ubiquiti WiFiStationEXT 802.11n [Atheros AR9271]

Add b002 Ubiquiti WiFiStation in the PID/VID list.

Reported-by: Roger Price <ath9k@rogerprice.org>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agort2x00: usb: fix reset resume
Stanislaw Gruszka [Tue, 16 Oct 2012 12:34:12 +0000]
rt2x00: usb: fix reset resume

Patch fixes warnings like below happened on resume:

WARNING: at net/mac80211/driver-ops.h:12 check_sdata_in_driver+0x32/0x34()

Problem is that in __ieee80211_susped() we remove sdata (i.e wlan0
interface) and then during resume we call usb_unbind_interface() ->
ieee80211_unregister_hw() with sdata removed.

Patch fixes problem by adding .reset_resume calback, hence we do not
unbind usb device on resume. This callback can be the same as normal
.resume callback, sice we do all needed initalization during interface
start, which is performed on resume [ ieee80211_resume() ->
ieee80211_reconfig() -> rt2x00mac_start() -> rt2x00lib_start ].

Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=48041

Reported-by: David Herrmann <dh.herrmann@googlemail.com>
Reported-and-tested-by: Stephen Boyd <bebarino@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agortlwifi: pass rx setup error code to caller
Christian Lamparter [Sun, 14 Oct 2012 20:15:48 +0000]
rtlwifi: pass rx setup error code to caller

If _rtl_usb_receive fails, the device is
probably not ready. Hence the error code
should be passed to the caller, so it can
react accordingly and notify the user.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoARM: at91: drop duplicated config SOC_AT91SAM9 entry
Jean-Christophe PLAGNIOL-VILLARD [Wed, 17 Oct 2012 13:41:31 +0000]
ARM: at91: drop duplicated config SOC_AT91SAM9 entry

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

7 years agoARM: at91/i2c: change id to let i2c-at91 work
Bo Shen [Mon, 15 Oct 2012 09:30:28 +0000]
ARM: at91/i2c: change id to let i2c-at91 work

The i2c core driver will turn the platform device ID to busnum
When using platfrom device ID as -1, it means dynamically assigned
the busnum. When writing code, we need to make sure the busnum,
and call i2c_register_board_info(int busnum, ...) to register device
if using -1, we do not know the value of busnum

In order to solve this issue, set the platform device ID as a fix number
Here using 0 to match the busnum used in i2c_regsiter_board_info()

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>

7 years agoARM: at91/i2c: change id to let i2c-gpio work
Bo Shen [Mon, 15 Oct 2012 09:30:27 +0000]
ARM: at91/i2c: change id to let i2c-gpio work

The i2c core driver will turn the platform device ID to busnum
When using platfrom device ID as -1, it means dynamically assigned
the busnum. When writing code, we need to make sure the busnum,
and call i2c_register_board_info(int busnum, ...) to register device
if using -1, we do not know the value of busnum

In order to solve this issue, set the platform device ID as a fix number
Here using 0 to match the busnum used in i2c_regsiter_board_info()

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org> [very long time]

7 years agoARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.
Marek Belisko [Mon, 1 Oct 2012 20:46:09 +0000]
ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

7 years agoARM: at91: fix external interrupt specification in board code
Nicolas Ferre [Wed, 24 Oct 2012 14:19:47 +0000]
ARM: at91: fix external interrupt specification in board code

Since the switch to sparse irq, we have to add the NR_IRQS_LEGACY
offset to static irq numbers. It has been forgotten on these
SPI irq definitions in board code.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org> [v3.6]

7 years agoARM: at91: fix external interrupts in non-DT case
Nicolas Ferre [Wed, 24 Oct 2012 14:09:57 +0000]
ARM: at91: fix external interrupts in non-DT case

Management of external interrupts has changed but the
non-DT code has not integrated these changes.
Add a mask to pass external irq specification from SoC
specific code to the at91_aic_init() function.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org> [v3.6]

7 years agoARM: at91: at91sam9g10: fix SOC type detection
Ivan Shugov [Wed, 24 Oct 2012 09:02:44 +0000]
ARM: at91: at91sam9g10: fix SOC type detection

Newer at91sam9g10 SoC revision can't be detected, so the kernel can't boot with
this kind of kernel panic:
"AT91: Impossible to detect the SOC type"

CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Atmel AT91SAM9G10-EK
Ignoring tag cmdline (using the default kernel command line)
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writeback
Kernel panic - not syncing: AT91: Impossible to detect the SOC type
[<c00133d4>] (unwind_backtrace+0x0/0xe0) from [<c02366dc>] (panic+0x78/0x1cc)
[<c02366dc>] (panic+0x78/0x1cc) from [<c02fa35c>] (at91_map_io+0x90/0xc8)
[<c02fa35c>] (at91_map_io+0x90/0xc8) from [<c02f9860>] (paging_init+0x564/0x6d0)
[<c02f9860>] (paging_init+0x564/0x6d0) from [<c02f7914>] (setup_arch+0x464/0x704)
[<c02f7914>] (setup_arch+0x464/0x704) from [<c02f44f8>] (start_kernel+0x6c/0x2d4)
[<c02f44f8>] (start_kernel+0x6c/0x2d4) from [<20008040>] (0x20008040)

The reason for this is that the Debug Unit Chip ID Register has changed between
Engineering Sample and definitive revision of the SoC. Changing the check of
cidr to socid will address the problem. We do not integrate this check to the
list just above because we also have to make sure that the extended id is
disregarded.

Signed-off-by: Ivan Shugov <ivan.shugov@gmail.com>
[nicolas.ferre@atmel.com: change commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org> [v3.1] # since commit 8c3583b6

7 years agoARM: at91/tc: fix typo in the DT document
Josh Wu [Fri, 14 Sep 2012 09:01:29 +0000]
ARM: at91/tc: fix typo in the DT document

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: stable <stable@vger.kernel.org> [v3.4]

7 years agodrm/radeon: fix ATPX regression in acpi rework
Alex Deucher [Tue, 23 Oct 2012 21:57:54 +0000]
drm/radeon: fix ATPX regression in acpi rework

Copy and paste typo in the apci rework.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=49351

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>

7 years agodrm/radeon: fix ATPX function documentation
Alex Deucher [Tue, 23 Oct 2012 16:42:42 +0000]
drm/radeon: fix ATPX function documentation

The ATPX code no longer handles ATRM.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

7 years agodrm/radeon: move the retry to gem_object_create
Christian König [Tue, 23 Oct 2012 13:53:19 +0000]
drm/radeon: move the retry to gem_object_create

When internal users want VRAM we shouldn't return GART memory instead.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

7 years agodrm/radeon: move size limits to gem_object_create.
Christian König [Tue, 23 Oct 2012 13:53:18 +0000]
drm/radeon: move size limits to gem_object_create.

Driver internal users shouldn't be limited in their allocation size.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

7 years agodrm/radeon: use vzalloc for gart pages
Christian König [Tue, 23 Oct 2012 13:53:17 +0000]
drm/radeon: use vzalloc for gart pages

When allocating more than 2GB of GART the array of pages
gets to big for kzalloc, use vzalloc instead.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

7 years agodrm/radeon: fix and simplify pot argument checks v3
Christian König [Tue, 23 Oct 2012 13:53:16 +0000]
drm/radeon: fix and simplify pot argument checks v3

GART and VRAM size limits need to be a power of two.
Fix values greater than 1GB and simplify those checks a bit.

v2: also fix radeon_vram_limit usage, and simplify test even more.
v3: agd5f: fix spelling as noticed by Klaus Schnass

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

7 years agoapparmor: fix IRQ stack overflow during free_profile
John Johansen [Wed, 24 Oct 2012 13:27:32 +0000]
apparmor: fix IRQ stack overflow during free_profile

BugLink: http://bugs.launchpad.net/bugs/1056078

Profile replacement can cause long chains of profiles to build up when
the profile being replaced is pinned. When the pinned profile is finally
freed, it puts the reference to its replacement, which may in turn nest
another call to free_profile on the stack. Because this may happen for
each profile in the replacedby chain this can result in a recusion that
causes the stack to overflow.

Break this nesting by directly walking the chain of replacedby profiles
(ie. use iteration instead of recursion to free the list). This results
in at most 2 levels of free_profile being called, while freeing a
replacedby chain.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

7 years agoiommu/tegra: smmu: Fix deadly typo
Hiro Sugawara [Thu, 18 Oct 2012 05:35:10 +0000]
iommu/tegra: smmu: Fix deadly typo

Fix a deadly typo in macro definition.

Cc: stable@vger.kernel.org
Signed-off-by: Hiro Sugawara <hsugawara@nvidia.com>
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>