ARM: tegra12: set CPU rate to 2.2GHz for sku 0x87
[linux-3.10.git] / arch / arm / mach-tegra / board-tn8-power.c
2014-01-16 Diwakar Tundlam arm: tegra: t124: tn8 increase GPU EDP 11.2A
2014-01-15 eddichang ARM: tegra: register gpadc battery temp driver fro...
2013-11-20 Seema Khowala arm: tegra: t124: tn8: update max cpu/gpu current
2013-10-28 Timo Alho arm: tegra: tn8: remove old system edp
2013-10-24 Seema Khowala arm: tegra: tn8: support system edp
2013-10-21 Darbha Sriharsha arm: tegra: Transfer bq2419x platform data to DT
2013-10-03 Laxman Dewangan ARM: tegra: TN8: move PMIC and fixed regulators to DT
2013-10-03 Venkat Reddy Talla ARM: tegra: TN8: remove max17048 i2c registration
2013-09-27 Hayden Du arm: tn8: add regulator client for OV5693
2013-09-27 Hunk Lin arm: tegra: tn8: modify gpu regulator
2013-09-27 Venkat Reddy Talla ARM: tegra: TN8: add support for FG and adc
2013-09-27 Darbha Sriharsha arch: arm: tn8: Pass charger platform data
2013-09-17 David Wang ARM:tegra:ardbeg: various senor bringup on TN8
2013-09-17 Hayden Du arm: tegra: tn8: Add regulator client for as364x
2013-09-17 Hunk Lin arm: tegra: tn8: set vdd_rtc voltage to 0.9v
2013-09-17 Laxman Dewangan ARM: tn8: SMPS10-OUT1 source the sw regulator for HDMI
2013-09-17 Laxman Dewangan ARM: tn8: register all fixed regulator as part of arch...
2013-09-17 Laxman Dewangan regulator: palmas: split SMPS10 out to two regulators
2013-09-17 Laxman Dewangan ARM: tegra: TN8 does not have CHRG_INT connected
2013-09-14 Dan Willemsen ARM: tegra: Move platform detect from <mach/hardware...
2013-09-14 Laxman Dewangan ARM: tegra: register power-supply notification through...
2013-09-14 Daniel Fu ARM: tegra: tn8: disable CM32181 registration
2013-09-14 Hayden Du arm: tegra: tn8: add the regulator client for nct72
2013-09-14 Laxman Dewangan ARM: tegra: properly configure Palmas pins for ID/VBUS...
2013-09-14 Daniel Fu ARM: tegra: tn8: change compass I2C add for tn8
2013-09-14 Laxman Dewangan pinctrl: palmas: add dt support for palmas pincontrol...
2013-09-14 Hunk Lin ARM: tegra: tn8: set LDO1 to EXT_CONTROL_NSLEEP
2013-09-14 Laxman Dewangan ARM: tegra: make VBUS-ENx gpio to open drain type
2013-09-14 Laxman Dewangan ARM: tegra: reset system through PMIC
2013-09-14 Laxman Dewangan ARM: config: remove use_power_off setting for Palmas...
2013-09-14 Laxman Dewangan ARM: tegra: use PALMAS_REGS_PDATA for power tree population
2013-09-14 Laxman Dewangan ARM: tegra: remove config Tegra_12x check for T124...
2013-09-14 Hayden Du arm: t124: tn8: Enable VBUS regulator for TN8 USB OTG
2013-09-14 Hayden Du arm: tegra: tn8: TN8 using PMU for VBUS detection.
2013-09-14 Ahung Cheng ARM: tegra: tn8 : Enable vdd_gpu rail through gpio
2013-09-14 Ahung Cheng arm: tegra: init tn8 and ardbeg as separate devices
2013-09-14 Ahung Cheng ARM: tegra: tn8 : update power rail accordingly
2013-09-14 Pavan Kunapuli ARM: tegra: tn8: Enable 32KCLK for audio and BT
2013-09-14 Pradeep Goudagunta ARM: tegra: tn8: Populate E1736 power rails