viafb: Move core stuff into via-core.c
Jonathan Corbet [Wed, 2 Dec 2009 03:29:39 +0000 (20:29 -0700)]
The first step toward turning viafb into a multifunction driver.  This
patch creates a new via-core.c file which serves as the main PCI driver;
everything else comes below that.  Some work has been done to rationalize
the i2c drivers in this new scheme.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

drivers/video/via/Makefile
drivers/video/via/dvi.c
drivers/video/via/global.h
drivers/video/via/lcd.c
drivers/video/via/via-core.c [new file with mode: 0644]
drivers/video/via/via-core.h [new file with mode: 0644]
drivers/video/via/via_i2c.c
drivers/video/via/via_i2c.h
drivers/video/via/viafbdev.c
drivers/video/via/viafbdev.h

index eeed238..aec3f8b 100644 (file)
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_FB_VIA) += viafb.o
 
-viafb-y        :=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
+viafb-y        :=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o via-core.o
index be51370..e357c4d 100644 (file)
@@ -96,7 +96,7 @@ int viafb_tmds_trasmitter_identify(void)
        viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = VT1632_TMDS;
        viaparinfo->chip_info->
                tmds_chip_info.tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR;
-       viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_I2C_ADAP_31;
+       viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_31;
        if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) != FAIL) {
                /*
                 * Currently only support 12bits,dual edge,add 24bits mode later
@@ -110,7 +110,7 @@ int viafb_tmds_trasmitter_identify(void)
                          viaparinfo->chip_info->tmds_chip_info.i2c_port);
                return OK;
        } else {
-               viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_I2C_ADAP_2C;
+               viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_2C;
                if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID)
                    != FAIL) {
                        tmds_register_write(0x08, 0x3b);
index 8d95d5f..be48e73 100644 (file)
@@ -35,6 +35,7 @@
 
 #include "debug.h"
 
+#include "via-core.h"
 #include "viafbdev.h"
 #include "chip.h"
 #include "accel.h"
index e19441d..8ef60c0 100644 (file)
@@ -172,14 +172,14 @@ static bool lvds_identify_integratedlvds(void)
 
 int viafb_lvds_trasmitter_identify(void)
 {
-       if (viafb_lvds_identify_vt1636(VIA_I2C_ADAP_31)) {
-               viaparinfo->chip_info->lvds_chip_info.i2c_port = VIA_I2C_ADAP_31;
+       if (viafb_lvds_identify_vt1636(VIA_PORT_31)) {
+               viaparinfo->chip_info->lvds_chip_info.i2c_port = VIA_PORT_31;
                DEBUG_MSG(KERN_INFO
                          "Found VIA VT1636 LVDS on port i2c 0x31\n");
        } else {
-               if (viafb_lvds_identify_vt1636(VIA_I2C_ADAP_2C)) {
+               if (viafb_lvds_identify_vt1636(VIA_PORT_2C)) {
                        viaparinfo->chip_info->lvds_chip_info.i2c_port =
-                               VIA_I2C_ADAP_2C;
+                               VIA_PORT_2C;
                        DEBUG_MSG(KERN_INFO
                                  "Found VIA VT1636 LVDS on port gpio 0x2c\n");
                }
@@ -419,7 +419,7 @@ static int lvds_register_read(int index)
 {
        u8 data;
 
-       viafb_i2c_readbyte(VIA_I2C_ADAP_2C,
+       viafb_i2c_readbyte(VIA_PORT_2C,
                        (u8) viaparinfo->chip_info->lvds_chip_info.lvds_chip_slave_addr,
                        (u8) index, &data);
        return data;
diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
new file mode 100644 (file)
index 0000000..e720147
--- /dev/null
@@ -0,0 +1,116 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ */
+
+/*
+ * Core code for the Via multifunction framebuffer device.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include "global.h"    /* Includes everything under the sun */
+
+/*
+ * The default port config.
+ */
+static struct via_port_cfg adap_configs[] = {
+       [VIA_PORT_26]   = { VIA_PORT_I2C,  VIA_MODE_OFF, VIASR, 0x26 },
+       [VIA_PORT_31]   = { VIA_PORT_I2C,  VIA_MODE_I2C, VIASR, 0x31 },
+       [VIA_PORT_25]   = { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x25 },
+       [VIA_PORT_2C]   = { VIA_PORT_GPIO, VIA_MODE_I2C, VIASR, 0x2c },
+       [VIA_PORT_3D]   = { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x3d },
+       { 0, 0, 0, 0 }
+};
+
+
+static int __devinit via_pci_probe(struct pci_dev *pdev,
+               const struct pci_device_id *ent)
+{
+       int ret;
+
+       ret = pci_enable_device(pdev);
+       if (ret)
+               return ret;
+       /*
+        * Create the I2C busses.  Bailing out on failure seems extreme,
+        * but that's what the code did before.
+        */
+       ret = viafb_create_i2c_busses(adap_configs);
+       if (ret)
+               goto out_disable;
+       /*
+        * Set up the framebuffer.
+        */
+       ret = via_fb_pci_probe(pdev, ent);
+       if (ret)
+               goto out_i2c;
+       return 0;
+
+out_i2c:
+       viafb_delete_i2c_busses();
+out_disable:
+       pci_disable_device(pdev);
+       return ret;
+}
+
+static void __devexit via_pci_remove(struct pci_dev *pdev)
+{
+       viafb_delete_i2c_busses();
+       via_fb_pci_remove(pdev);
+       pci_disable_device(pdev);
+}
+
+
+static struct pci_device_id via_pci_table[] __devinitdata = {
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID),
+         .driver_data = UNICHROME_CLE266 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
+         .driver_data = UNICHROME_PM800 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID),
+         .driver_data = UNICHROME_K400 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID),
+         .driver_data = UNICHROME_K800 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
+         .driver_data = UNICHROME_CN700 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
+         .driver_data = UNICHROME_K8M890 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID),
+         .driver_data = UNICHROME_CX700 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
+         .driver_data = UNICHROME_P4M900 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID),
+         .driver_data = UNICHROME_CN750 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID),
+         .driver_data = UNICHROME_VX800 },
+       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID),
+         .driver_data = UNICHROME_VX855 },
+       { }
+};
+MODULE_DEVICE_TABLE(pci, via_pci_table);
+
+static struct pci_driver via_driver = {
+       .name           = "viafb",
+       .id_table       = via_pci_table,
+       .probe          = via_pci_probe,
+       .remove         = __devexit_p(via_pci_remove),
+};
+
+static int __init via_core_init(void)
+{
+       int ret;
+
+       ret = viafb_init();
+       if (ret)
+               return ret;
+       return pci_register_driver(&via_driver);
+}
+
+static void __exit via_core_exit(void)
+{
+       pci_unregister_driver(&via_driver);
+       viafb_exit();
+}
+
+module_init(via_core_init);
+module_exit(via_core_exit);
diff --git a/drivers/video/via/via-core.h b/drivers/video/via/via-core.h
new file mode 100644 (file)
index 0000000..1c2fb06
--- /dev/null
@@ -0,0 +1,55 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __VIA_CORE_H__
+#define __VIA_CORE_H__
+/*
+ * A description of each known serial I2C/GPIO port.
+ */
+enum via_port_type {
+       VIA_PORT_NONE = 0,
+       VIA_PORT_I2C,
+       VIA_PORT_GPIO,
+};
+
+enum via_port_mode {
+       VIA_MODE_OFF = 0,
+       VIA_MODE_I2C,           /* Used as I2C port */
+       VIA_MODE_GPIO,  /* Two GPIO ports */
+};
+
+enum viafb_i2c_adap {
+       VIA_PORT_26 = 0,
+       VIA_PORT_31,
+       VIA_PORT_25,
+       VIA_PORT_2C,
+       VIA_PORT_3D,
+};
+#define VIAFB_NUM_PORTS 5
+
+struct via_port_cfg {
+       enum via_port_type      type;
+       enum via_port_mode      mode;
+       u_int16_t               io_port;
+       u_int8_t                ioport_index;
+};
+#endif /* __VIA_CORE_H__ */
index b5253e3..4788292 100644 (file)
 
 #include "global.h"
 
+/*
+ * There can only be one set of these, so there's no point in having
+ * them be dynamically allocated...
+ */
+#define VIAFB_NUM_I2C          5
+static struct via_i2c_stuff via_i2c_par[VIAFB_NUM_I2C];
+
 static void via_i2c_setscl(void *data, int state)
 {
        u8 val;
-       struct via_i2c_adap_cfg *adap_data = data;
+       struct via_port_cfg *adap_data = data;
 
-       DEBUG_MSG(KERN_DEBUG "reading index 0x%02x from IO 0x%x\n",
-               adap_data->ioport_index, adap_data->io_port);
        val = viafb_read_reg(adap_data->io_port,
                             adap_data->ioport_index) & 0xF0;
        if (state)
@@ -35,10 +40,10 @@ static void via_i2c_setscl(void *data, int state)
        else
                val &= ~0x20;
        switch (adap_data->type) {
-       case VIA_I2C_I2C:
+       case VIA_PORT_I2C:
                val |= 0x01;
                break;
-       case VIA_I2C_GPIO:
+       case VIA_PORT_GPIO:
                val |= 0x80;
                break;
        default:
@@ -50,7 +55,7 @@ static void via_i2c_setscl(void *data, int state)
 
 static int via_i2c_getscl(void *data)
 {
-       struct via_i2c_adap_cfg *adap_data = data;
+       struct via_port_cfg *adap_data = data;
 
        if (viafb_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x08)
                return 1;
@@ -59,7 +64,7 @@ static int via_i2c_getscl(void *data)
 
 static int via_i2c_getsda(void *data)
 {
-       struct via_i2c_adap_cfg *adap_data = data;
+       struct via_port_cfg *adap_data = data;
 
        if (viafb_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x04)
                return 1;
@@ -69,7 +74,7 @@ static int via_i2c_getsda(void *data)
 static void via_i2c_setsda(void *data, int state)
 {
        u8 val;
-       struct via_i2c_adap_cfg *adap_data = data;
+       struct via_port_cfg *adap_data = data;
 
        val = viafb_read_reg(adap_data->io_port,
                             adap_data->ioport_index) & 0xF0;
@@ -78,10 +83,10 @@ static void via_i2c_setsda(void *data, int state)
        else
                val &= ~0x10;
        switch (adap_data->type) {
-       case VIA_I2C_I2C:
+       case VIA_PORT_I2C:
                val |= 0x01;
                break;
-       case VIA_I2C_GPIO:
+       case VIA_PORT_GPIO:
                val |= 0x40;
                break;
        default:
@@ -103,8 +108,7 @@ int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata)
        mm1[0] = index;
        msgs[0].len = 1; msgs[1].len = 1;
        msgs[0].buf = mm1; msgs[1].buf = pdata;
-       return i2c_transfer(&viaparinfo->shared->i2c_stuff[adap].adapter,
-                       msgs, 2);
+       return i2c_transfer(&via_i2c_par[adap].adapter, msgs, 2);
 }
 
 int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data)
@@ -116,8 +120,7 @@ int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data)
        msgs.addr = slave_addr / 2;
        msgs.len = 2;
        msgs.buf = msg;
-       return i2c_transfer(&viaparinfo->shared->i2c_stuff[adap].adapter,
-                       &msgs, 1);
+       return i2c_transfer(&via_i2c_par[adap].adapter, &msgs, 1);
 }
 
 int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len)
@@ -131,13 +134,12 @@ int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len
        mm1[0] = index;
        msgs[0].len = 1; msgs[1].len = buff_len;
        msgs[0].buf = mm1; msgs[1].buf = buff;
-       return i2c_transfer(&viaparinfo->shared->i2c_stuff[adap].adapter,
-                       msgs, 2);
+       return i2c_transfer(&via_i2c_par[adap].adapter, msgs, 2);
 }
 
 static int create_i2c_bus(struct i2c_adapter *adapter,
                          struct i2c_algo_bit_data *algo,
-                         struct via_i2c_adap_cfg *adap_cfg,
+                         struct via_port_cfg *adap_cfg,
                          struct pci_dev *pdev)
 {
        DEBUG_MSG(KERN_DEBUG "viafb: creating bus adap=0x%p, algo_bit_data=0x%p, adap_cfg=0x%p\n", adapter, algo, adap_cfg);
@@ -170,31 +172,15 @@ static int create_i2c_bus(struct i2c_adapter *adapter,
        return i2c_bit_add_bus(adapter);
 }
 
-/*
- * By default, we only activate busses on ports 2c and 31 to avoid
- * conflicts with other possible users; that default can be changed
- * below.
- */
-static struct via_i2c_adap_cfg adap_configs[] = {
-       [VIA_I2C_ADAP_26]       = { VIA_I2C_I2C,  VIASR, 0x26, 0 },
-       [VIA_I2C_ADAP_31]       = { VIA_I2C_I2C,  VIASR, 0x31, 1 },
-       [VIA_I2C_ADAP_25]       = { VIA_I2C_GPIO, VIASR, 0x25, 0 },
-       [VIA_I2C_ADAP_2C]       = { VIA_I2C_GPIO, VIASR, 0x2c, 1 },
-       [VIA_I2C_ADAP_3D]       = { VIA_I2C_GPIO, VIASR, 0x3d, 0 },
-       { 0, 0, 0, 0 }
-};
-
-int viafb_create_i2c_busses(struct viafb_par *viapar)
+int viafb_create_i2c_busses(struct via_port_cfg *configs)
 {
        int i, ret;
 
-       for (i = 0; i < VIAFB_NUM_I2C; i++) {
-               struct via_i2c_adap_cfg *adap_cfg = &adap_configs[i];
-               struct via_i2c_stuff *i2c_stuff = &viapar->shared->i2c_stuff[i];
+       for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+               struct via_port_cfg *adap_cfg = configs++;
+               struct via_i2c_stuff *i2c_stuff = &via_i2c_par[i];
 
-               if (adap_cfg->type == 0)
-                       break;
-               if (!adap_cfg->is_active)
+               if (adap_cfg->type == 0 || adap_cfg->mode != VIA_MODE_I2C)
                        continue;
 
                ret = create_i2c_bus(&i2c_stuff->adapter,
@@ -211,14 +197,16 @@ int viafb_create_i2c_busses(struct viafb_par *viapar)
        return 0;
 }
 
-void viafb_delete_i2c_busses(struct viafb_par *par)
+void viafb_delete_i2c_busses(void)
 {
        int i;
 
-       for (i = 0; i < ARRAY_SIZE(par->shared->i2c_stuff); i++) {
-               struct via_i2c_stuff *i2c_stuff = &par->shared->i2c_stuff[i];
-               /* only remove those entries in the array that we've
-                * actually used (and thus initialized algo_data) */
+       for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+               struct via_i2c_stuff *i2c_stuff = &via_i2c_par[i];
+               /*
+                * Only remove those entries in the array that we've
+                * actually used (and thus initialized algo_data)
+                */
                if (i2c_stuff->adapter.algo_data == &i2c_stuff->algo)
                        i2c_del_adapter(&i2c_stuff->adapter);
        }
index 73d682f..0093291 100644 (file)
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-enum via_i2c_type {
-       VIA_I2C_NONE,
-       VIA_I2C_I2C,
-       VIA_I2C_GPIO,
-};
-
-/* private data for each adapter */
-struct via_i2c_adap_cfg {
-       enum via_i2c_type       type;
-       u_int16_t               io_port;
-       u_int8_t                ioport_index;
-       u8                      is_active;
-};
-
 struct via_i2c_stuff {
        u16 i2c_port;                   /* GPIO or I2C port */
        struct i2c_adapter adapter;
        struct i2c_algo_bit_data algo;
 };
 
-enum viafb_i2c_adap {
-       VIA_I2C_ADAP_26,
-       VIA_I2C_ADAP_31,
-       VIA_I2C_ADAP_25,
-       VIA_I2C_ADAP_2C,
-       VIA_I2C_ADAP_3D,
-};
 
 int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata);
 int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data);
 int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len);
 
 struct viafb_par;
-int viafb_create_i2c_busses(struct viafb_par *par);
-void viafb_delete_i2c_busses(struct viafb_par *par);
+int viafb_create_i2c_busses(struct via_port_cfg *cfg);
+void viafb_delete_i2c_busses(void);
+struct i2c_adapter *viafb_find_adapter(enum viafb_i2c_adap which);
 #endif /* __VIA_I2C_H__ */
index fa10049..17a874f 100644 (file)
@@ -1731,8 +1731,9 @@ static int parse_mode(const char *str, u32 *xres, u32 *yres)
        return 0;
 }
 
-static int __devinit via_pci_probe(struct pci_dev *pdev,
-                                  const struct pci_device_id *ent)
+
+int __devinit via_fb_pci_probe(struct pci_dev *pdev,
+               const struct pci_device_id *ent)
 {
        u32 default_xres, default_yres;
        struct VideoModeTable *vmode_entry;
@@ -1764,6 +1765,7 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
                &viaparinfo->shared->lvds_setting_info2;
        viaparinfo->crt_setting_info = &viaparinfo->shared->crt_setting_info;
        viaparinfo->chip_info = &viaparinfo->shared->chip_info;
+       spin_lock_init(&viaparinfo->reg_lock);
 
        if (viafb_dual_fb)
                viafb_SAMM_ON = 1;
@@ -1774,26 +1776,21 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
        if (!viafb_SAMM_ON)
                viafb_dual_fb = 0;
 
-       /* Set up I2C bus stuff */
-       rc = viafb_create_i2c_busses(viaparinfo);
-       if (rc)
-               goto out_fb_release;
-
        viafb_init_chip_info(pdev, ent);
        viaparinfo->fbmem = pci_resource_start(pdev, 0);
        viaparinfo->memsize = viafb_get_fb_size_from_pci();
        if (viaparinfo->memsize < 0) {
                rc = viaparinfo->memsize;
-               goto out_delete_i2c;
+               goto out_fb_release;
        }
        viaparinfo->fbmem_free = viaparinfo->memsize;
        viaparinfo->fbmem_used = 0;
        viafbinfo->screen_base = ioremap_nocache(viaparinfo->fbmem,
                viaparinfo->memsize);
        if (!viafbinfo->screen_base) {
-               printk(KERN_INFO "ioremap failed\n");
+               printk(KERN_ERR "ioremap of fbmem failed\n");
                rc = -ENOMEM;
-               goto out_delete_i2c;
+               goto out_fb_release;
        }
 
        viafbinfo->fix.mmio_start = pci_resource_start(pdev, 1);
@@ -1963,14 +1960,12 @@ out_fb1_release:
                framebuffer_release(viafbinfo1);
 out_unmap_screen:
        iounmap(viafbinfo->screen_base);
-out_delete_i2c:
-       viafb_delete_i2c_busses(viaparinfo);
 out_fb_release:
        framebuffer_release(viafbinfo);
        return rc;
 }
 
-static void __devexit via_pci_remove(struct pci_dev *pdev)
+void __devexit via_fb_pci_remove(struct pci_dev *pdev)
 {
        DEBUG_MSG(KERN_INFO "via_pci_remove!\n");
        fb_dealloc_cmap(&viafbinfo->cmap);
@@ -1980,8 +1975,6 @@ static void __devexit via_pci_remove(struct pci_dev *pdev)
        iounmap((void *)viafbinfo->screen_base);
        iounmap(viaparinfo->shared->engine_mmio);
 
-       viafb_delete_i2c_busses(viaparinfo);
-
        framebuffer_release(viafbinfo);
        if (viafb_dual_fb)
                framebuffer_release(viafbinfo1);
@@ -2062,41 +2055,10 @@ static int __init viafb_setup(char *options)
 }
 #endif
 
-static struct pci_device_id viafb_pci_table[] __devinitdata = {
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID),
-         .driver_data = UNICHROME_CLE266 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
-         .driver_data = UNICHROME_PM800 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID),
-         .driver_data = UNICHROME_K400 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID),
-         .driver_data = UNICHROME_K800 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
-         .driver_data = UNICHROME_CN700 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
-         .driver_data = UNICHROME_K8M890 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID),
-         .driver_data = UNICHROME_CX700 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
-         .driver_data = UNICHROME_P4M900 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID),
-         .driver_data = UNICHROME_CN750 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID),
-         .driver_data = UNICHROME_VX800 },
-       { PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID),
-         .driver_data = UNICHROME_VX855 },
-       { }
-};
-MODULE_DEVICE_TABLE(pci, viafb_pci_table);
-
-static struct pci_driver viafb_driver = {
-       .name           = "viafb",
-       .id_table       = viafb_pci_table,
-       .probe          = via_pci_probe,
-       .remove         = __devexit_p(via_pci_remove),
-};
-
-static int __init viafb_init(void)
+/*
+ * These are called out of via-core for now.
+ */
+int __init viafb_init(void)
 {
        u32 dummy;
 #ifndef MODULE
@@ -2115,13 +2077,12 @@ static int __init viafb_init(void)
        printk(KERN_INFO
        "VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
               VERSION_MAJOR, VERSION_MINOR);
-       return pci_register_driver(&viafb_driver);
+       return 0;
 }
 
-static void __exit viafb_exit(void)
+void __exit viafb_exit(void)
 {
        DEBUG_MSG(KERN_INFO "viafb_exit!\n");
-       pci_unregister_driver(&viafb_driver);
 }
 
 static struct fb_ops viafb_ops = {
@@ -2141,8 +2102,6 @@ static struct fb_ops viafb_ops = {
        .fb_sync = viafb_sync,
 };
 
-module_init(viafb_init);
-module_exit(viafb_exit);
 
 #ifdef MODULE
 module_param(viafb_mode, charp, S_IRUSR);
index 4bc00ec..5604f27 100644 (file)
@@ -24,6 +24,7 @@
 
 #include <linux/proc_fs.h>
 #include <linux/fb.h>
+#include <linux/spinlock.h>
 
 #include "ioctl.h"
 #include "share.h"
@@ -42,9 +43,6 @@
 struct viafb_shared {
        struct proc_dir_entry *proc_entry;      /*viafb proc entry */
 
-       /* I2C stuff */
-       struct via_i2c_stuff i2c_stuff[VIAFB_NUM_I2C];
-
        /* All the information will be needed to set engine */
        struct tmds_setting_information tmds_setting_info;
        struct crt_setting_information crt_setting_info;
@@ -74,6 +72,14 @@ struct viafb_par {
 
        struct viafb_shared *shared;
 
+       /*
+        * (jc) I believe one should use locking to protect against
+        * concurrent access to the device ports and registers.  Thus,
+        * this lock.  Use of it is *far* from universal, though...
+        * someday...
+        */
+       spinlock_t reg_lock;
+
        /* All the information will be needed to set engine */
        /* depreciated, use the ones in shared directly */
        struct tmds_setting_information *tmds_setting_info;
@@ -101,4 +107,9 @@ u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 void viafb_gpio_i2c_write_mask_lvds(struct lvds_setting_information
                              *plvds_setting_info, struct lvds_chip_information
                              *plvds_chip_info, struct IODATA io_data);
+int via_fb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+void via_fb_pci_remove(struct pci_dev *pdev);
+/* Temporary */
+int viafb_init(void);
+void viafb_exit(void);
 #endif /* __VIAFBDEV_H__ */