ASoC: tegra: fix Tegra30 I2S capture parameter setup
Stephen Warren [Wed, 14 Aug 2013 20:24:16 +0000 (14:24 -0600)]
commit c90c0d7a96e634a73ef1580f1d20993606545647 upstream.

The Tegra30 I2S driver was writing the AHUB interface parameters to the
playback path register rather than the capture path register. This
caused the capture parameters not to be configured at all, so if
capturing using non-HW-default parameters (e.g. 16-bit stereo rather
than 8-bit mono) the audio would be corrupted.

With this fixed, audio capture from an analog microphone works correctly
on the Cardhu board.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sound/soc/tegra/tegra30_i2s.c

index 31d092d..a5432b1 100644 (file)
@@ -228,7 +228,7 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
                reg = TEGRA30_I2S_CIF_RX_CTRL;
        } else {
                val |= TEGRA30_AUDIOCIF_CTRL_DIRECTION_TX;
-               reg = TEGRA30_I2S_CIF_RX_CTRL;
+               reg = TEGRA30_I2S_CIF_TX_CTRL;
        }
 
        regmap_write(i2s->regmap, reg, val);