CRIS: Remove VCS simulator specific code
Jesper Nilsson [Wed, 20 Jun 2012 15:17:10 +0000 (17:17 +0200)]
The VCS simulator was a tool used in the development of the chip
and is no longer used or necessary.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

14 files changed:
arch/cris/Kconfig
arch/cris/arch-v32/drivers/axisflashmap.c
arch/cris/arch-v32/kernel/head.S
arch/cris/arch-v32/kernel/kgdb.c
arch/cris/arch-v32/mach-a3/Makefile
arch/cris/arch-v32/mach-a3/vcs_hook.c [deleted file]
arch/cris/arch-v32/mach-a3/vcs_hook.h [deleted file]
arch/cris/arch-v32/mach-fs/Makefile
arch/cris/arch-v32/mach-fs/vcs_hook.c [deleted file]
arch/cris/arch-v32/mach-fs/vcs_hook.h [deleted file]
arch/cris/arch-v32/mm/init.c
arch/cris/include/arch-v32/arch/page.h
arch/cris/include/arch-v32/arch/processor.h
arch/cris/include/arch-v32/mach-fs/mach/startup.inc

index bb34465..ca038af 100644 (file)
@@ -137,11 +137,6 @@ config CRIS_MACH_ARTPEC3
 
 endchoice
 
-config ETRAX_VCS_SIM
-       bool "VCS Simulator"
-       help
-         Setup hardware to be run in the VCS simulator.
-
 config ETRAX_ARCH_V10
        bool
        default y if ETRAX100LX || ETRAX100LX_V2
index b34438e..1b6ad62 100644 (file)
@@ -329,7 +329,6 @@ static int __init init_axis_flash(void)
        }
 #endif
 
-#ifndef CONFIG_ETRAX_VCS_SIM
        main_mtd = flash_probe();
        if (main_mtd)
                printk(KERN_INFO "%s: 0x%08x bytes of NOR flash memory.\n",
@@ -603,34 +602,7 @@ static int __init init_axis_flash(void)
                                        "partition %d\n", part);
                }
        }
-#endif /* CONFIG_EXTRAX_VCS_SIM */
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-       /* For simulator, always use a RAM partition.
-        * The rootfs will be found after the kernel in RAM,
-        * with romfs_start and romfs_end indicating location and size.
-        */
-       struct mtd_info *mtd_ram;
-
-       mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-       if (!mtd_ram) {
-               panic("axisflashmap: Couldn't allocate memory for "
-                     "mtd_info!\n");
-       }
-
-       printk(KERN_INFO "axisflashmap: Adding RAM partition for romfs, "
-              "at %u, size %u\n",
-              (unsigned) romfs_start, (unsigned) romfs_length);
-
-       err = mtdram_init_device(mtd_ram, (void *)romfs_start,
-                                romfs_length, "romfs");
-       if (err) {
-               panic("axisflashmap: Could not initialize MTD RAM "
-                     "device!\n");
-       }
-#endif /* CONFIG_EXTRAX_VCS_SIM */
-
-#ifndef CONFIG_ETRAX_VCS_SIM
        if (aux_mtd) {
                aux_partition.size = aux_mtd->size;
                err = mtd_device_register(aux_mtd, &aux_partition, 1);
@@ -639,7 +611,6 @@ static int __init init_axis_flash(void)
                              "aux mtd device!\n");
 
        }
-#endif /* CONFIG_EXTRAX_VCS_SIM */
 
        return err;
 }
index 5d502b9..51e3416 100644 (file)
        .global nand_boot
        .global swapper_pg_dir
 
-       ;; Dummy section to make it bootable with current VCS simulator
-#ifdef CONFIG_ETRAX_VCS_SIM
-       .section ".boot", "ax"
-       ba tstart
-       nop
-#endif
-
        .text
 tstart:
        ;; This is the entry point of the kernel. The CPU is currently in
@@ -75,17 +68,10 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
                | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)     \
                | REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 5)     \
                | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
-#elif !defined(CONFIG_ETRAX_VCS_SIM)
-       move.d  REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)       \
-               | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)     \
-               | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
 #else
-       ;; Map the virtual DRAM to the RW eprom area at address 0.
-       ;; Also map 0xa for the hook calls,
        move.d  REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)       \
                | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)     \
-               | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb)   \
-               | REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
+               | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
 #endif
 
        ;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00.
@@ -126,27 +112,6 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
                | REG_STATE(mmu, rw_mm_cfg, seg_2, page)        \
                | REG_STATE(mmu, rw_mm_cfg, seg_1, page)        \
                | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
-#elif !defined(CONFIG_ETRAX_VCS_SIM)
-       move.d  REG_STATE(mmu, rw_mm_cfg, we, on)               \
-               | REG_STATE(mmu, rw_mm_cfg, acc, on)            \
-               | REG_STATE(mmu, rw_mm_cfg, ex, on)             \
-               | REG_STATE(mmu, rw_mm_cfg, inv, on)            \
-               | REG_STATE(mmu, rw_mm_cfg, seg_f, linear)      \
-               | REG_STATE(mmu, rw_mm_cfg, seg_e, linear)      \
-               | REG_STATE(mmu, rw_mm_cfg, seg_d, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_c, linear)      \
-               | REG_STATE(mmu, rw_mm_cfg, seg_b, linear)      \
-               | REG_STATE(mmu, rw_mm_cfg, seg_a, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_9, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_8, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_7, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_6, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_5, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_4, linear)      \
-               | REG_STATE(mmu, rw_mm_cfg, seg_3, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_2, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_1, page)        \
-               | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
 #else
        move.d  REG_STATE(mmu, rw_mm_cfg, we, on)               \
                | REG_STATE(mmu, rw_mm_cfg, acc, on)            \
@@ -157,7 +122,7 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
                | REG_STATE(mmu, rw_mm_cfg, seg_d, page)        \
                | REG_STATE(mmu, rw_mm_cfg, seg_c, linear)      \
                | REG_STATE(mmu, rw_mm_cfg, seg_b, linear)      \
-               | REG_STATE(mmu, rw_mm_cfg, seg_a, linear)      \
+               | REG_STATE(mmu, rw_mm_cfg, seg_a, page)        \
                | REG_STATE(mmu, rw_mm_cfg, seg_9, page)        \
                | REG_STATE(mmu, rw_mm_cfg, seg_8, page)        \
                | REG_STATE(mmu, rw_mm_cfg, seg_7, page)        \
@@ -226,7 +191,6 @@ master_cpu:
        move.d secondary_cpu_entry, $r1
        move.d $r1, [$r0]
 #endif
-#ifndef CONFIG_ETRAX_VCS_SIM
        ; Check if starting from DRAM (network->RAM boot or unpacked
        ; compressed kernel), or directly from flash.
        lapcq   ., $r0
@@ -234,7 +198,6 @@ master_cpu:
        cmp.d   0x10000, $r0    ; Arbitrary, something above this code.
        blo     _inflash0
        nop
-#endif
 
        jump    _inram          ; Jump to cached RAM.
        nop
@@ -326,7 +289,6 @@ move_cramfs:
        move.d  romfs_length, $r1
        move.d  $r0, [$r1]
 
-#ifndef CONFIG_ETRAX_VCS_SIM
        ;; The kernel could have been unpacked to DRAM by the loader, but
        ;; the cramfs image could still be in the flash immediately
        ;; following the compressed kernel image. The loader passes the address
@@ -335,10 +297,6 @@ move_cramfs:
        cmp.d   0x0ffffff8, $r9
        bhs     _no_romfs_in_flash ; R9 points outside the flash area.
        nop
-#else
-       ba _no_romfs_in_flash
-       nop
-#endif
        ;; cramfs rootfs might to be in flash. Check for it.
        move.d  [$r9], $r0      ; cramfs_super.magic
        cmp.d   CRAMFS_MAGIC, $r0
@@ -396,7 +354,6 @@ _no_romfs_in_flash:
        move.d  romfs_length, $r3
        move.d  $r2, [$r3]      ; store size at romfs_length
 
-#ifndef CONFIG_ETRAX_VCS_SIM
        add.d   $r2, $r0        ; copy from end and downwards
        add.d   $r2, $r1
 
@@ -410,7 +367,6 @@ _no_romfs_in_flash:
        subq    1, $r2
        bne     1b
        nop
-#endif
 
 4:
        ;; BSS move done.
@@ -455,7 +411,6 @@ no_command_line:
        move.d  etrax_irv, $r1  ; Set the exception base register and pointer.
        move.d  $r0, [$r1]
 
-#ifndef CONFIG_ETRAX_VCS_SIM
        ;; Clear the BSS region from _bss_start to _end.
        move.d  __bss_start, $r0
        move.d  _end, $r1
@@ -463,15 +418,6 @@ no_command_line:
        cmp.d   $r1, $r0
        blo 1b
        nop
-#endif
-
-#ifdef CONFIG_ETRAX_VCS_SIM
-       /* Set the watchdog timeout to something big. Will be removed when */
-       /* watchdog can be disabled with command line option */
-       move.d  0x7fffffff, $r10
-       jsr     CPU_WATCHDOG_TIMEOUT
-       nop
-#endif
 
        ; Initialize registers to increase determinism
        move.d __bss_start, $r0
index 8c1d35c..b06813a 100644 (file)
@@ -381,23 +381,9 @@ static int read_register(char regno, unsigned int *valptr);
 /* Serial port, reads one character. ETRAX 100 specific. from debugport.c */
 int getDebugChar(void);
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-int getDebugChar(void)
-{
-  return socketread();
-}
-#endif
-
 /* Serial port, writes one character. ETRAX 100 specific. from debugport.c */
 void putDebugChar(int val);
 
-#ifdef CONFIG_ETRAX_VCS_SIM
-void putDebugChar(int val)
-{
-  socketwrite((char *)&val, 1);
-}
-#endif
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 
index 41fa6a6..d366e08 100644 (file)
@@ -1,10 +1,8 @@
-# $Id: Makefile,v 1.3 2007/03/13 11:57:46 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_ETRAX_VCS_SIM) += vcs_hook.o
 obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
diff --git a/arch/cris/arch-v32/mach-a3/vcs_hook.c b/arch/cris/arch-v32/mach-a3/vcs_hook.c
deleted file mode 100644 (file)
index 58b1a54..0000000
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Simulator hook mechanism
- */
-
-#include "vcs_hook.h"
-#include <asm/io.h>
-#include <stdarg.h>
-
-#define HOOK_TRIG_ADDR      0xb7000000
-#define HOOK_MEM_BASE_ADDR  0xce000000
-
-static volatile unsigned *hook_base;
-
-#define HOOK_DATA(offset) hook_base[offset]
-#define VHOOK_DATA(offset) hook_base[offset]
-#define HOOK_TRIG(funcid) \
-       do { \
-               *((unsigned *) HOOK_TRIG_ADDR) = funcid; \
-       } while (0)
-#define HOOK_DATA_BYTE(offset) ((unsigned char *)hook_base)[offset]
-
-static void hook_init(void)
-{
-       static int first = 1;
-       if (first) {
-               first = 0;
-               hook_base = ioremap(HOOK_MEM_BASE_ADDR, 8192);
-       }
-}
-
-static unsigned hook_trig(unsigned id)
-{
-       unsigned ret;
-
-       /* preempt_disable(); */
-
-       /* Dummy read from mem to make sure data has propagated to memory
-        * before trigging */
-       ret = *hook_base;
-
-       /* trigger hook */
-       HOOK_TRIG(id);
-
-       /* wait for call to finish */
-       while (VHOOK_DATA(0) > 0) ;
-
-       /* extract return value */
-
-       ret = VHOOK_DATA(1);
-
-       return ret;
-}
-
-int hook_call(unsigned id, unsigned pcnt, ...)
-{
-       va_list ap;
-       int i;
-       unsigned ret;
-
-       hook_init();
-
-       HOOK_DATA(0) = id;
-
-       va_start(ap, pcnt);
-       for (i = 1; i <= pcnt; i++)
-               HOOK_DATA(i) = va_arg(ap, unsigned);
-       va_end(ap);
-
-       ret = hook_trig(id);
-
-       return ret;
-}
-
-int hook_call_str(unsigned id, unsigned size, const char *str)
-{
-       int i;
-       unsigned ret;
-
-       hook_init();
-
-       HOOK_DATA(0) = id;
-       HOOK_DATA(1) = size;
-
-       for (i = 0; i < size; i++)
-               HOOK_DATA_BYTE(8 + i) = str[i];
-       HOOK_DATA_BYTE(8 + i) = 0;
-
-       ret = hook_trig(id);
-
-       return ret;
-}
-
-void print_str(const char *str)
-{
-       int i;
-       /* find null at end of string */
-       for (i = 1; str[i]; i++) ;
-       hook_call(hook_print_str, i, str);
-}
-
-void CPU_WATCHDOG_TIMEOUT(unsigned t)
-{
-}
diff --git a/arch/cris/arch-v32/mach-a3/vcs_hook.h b/arch/cris/arch-v32/mach-a3/vcs_hook.h
deleted file mode 100644 (file)
index 8b73d0e..0000000
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Simulator hook call mechanism
- */
-
-#ifndef __hook_h__
-#define __hook_h__
-
-int hook_call(unsigned id, unsigned pcnt, ...);
-int hook_call_str(unsigned id, unsigned size, const char *str);
-
-enum hook_ids {
-  hook_debug_on = 1,
-  hook_debug_off,
-  hook_stop_sim_ok,
-  hook_stop_sim_fail,
-  hook_alloc_shared,
-  hook_ptr_shared,
-  hook_free_shared,
-  hook_file2shared,
-  hook_cmp_shared,
-  hook_print_params,
-  hook_sim_time,
-  hook_stop_sim,
-  hook_kick_dog,
-  hook_dog_timeout,
-  hook_rand,
-  hook_srand,
-  hook_rand_range,
-  hook_print_str,
-  hook_print_hex,
-  hook_cmp_offset_shared,
-  hook_fill_random_shared,
-  hook_alloc_random_data,
-  hook_calloc_random_data,
-  hook_print_int,
-  hook_print_uint,
-  hook_fputc,
-  hook_init_fd,
-  hook_sbrk,
-  hook_print_context_descr,
-  hook_print_data_descr,
-  hook_print_group_descr,
-  hook_fill_shared,
-  hook_sl_srand,
-  hook_sl_rand_irange,
-  hook_sl_rand_urange,
-  hook_sl_sh_malloc_aligned,
-  hook_sl_sh_calloc_aligned,
-  hook_sl_sh_alloc_random_data,
-  hook_sl_sh_file2mem,
-  hook_sl_vera_mbox_handle,
-  hook_sl_vera_mbox_put,
-  hook_sl_vera_mbox_get,
-  hook_sl_system,
-  hook_sl_sh_hexdump
-};
-
-#endif
index 41fa6a6..d366e08 100644 (file)
@@ -1,10 +1,8 @@
-# $Id: Makefile,v 1.3 2007/03/13 11:57:46 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
 
 obj-y   := dma.o pinmux.o io.o arbiter.o
-obj-$(CONFIG_ETRAX_VCS_SIM) += vcs_hook.o
 obj-$(CONFIG_CPU_FREQ)   += cpufreq.o
 
 clean:
diff --git a/arch/cris/arch-v32/mach-fs/vcs_hook.c b/arch/cris/arch-v32/mach-fs/vcs_hook.c
deleted file mode 100644 (file)
index b11594a..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Call simulator hook. This is the part running in the
- * simulated program.
- */
-
-#include "vcs_hook.h"
-#include <stdarg.h>
-#include <arch-v32/hwregs/reg_map.h>
-#include <arch-v32/hwregs/intr_vect_defs.h>
-
-#define HOOK_TRIG_ADDR     0xb7000000  /* hook cvlog model reg address */
-#define HOOK_MEM_BASE_ADDR 0xa0000000  /* csp4 (shared mem) base addr */
-
-#define HOOK_DATA(offset) ((unsigned *)HOOK_MEM_BASE_ADDR)[offset]
-#define VHOOK_DATA(offset) ((volatile unsigned *)HOOK_MEM_BASE_ADDR)[offset]
-#define HOOK_TRIG(funcid) \
-       do { \
-               *((unsigned *) HOOK_TRIG_ADDR) = funcid; \
-       } while (0)
-#define HOOK_DATA_BYTE(offset) ((unsigned char *)HOOK_MEM_BASE_ADDR)[offset]
-
-int hook_call(unsigned id, unsigned pcnt, ...)
-{
-       va_list ap;
-       unsigned i;
-       unsigned ret;
-#ifdef USING_SOS
-       PREEMPT_OFF_SAVE();
-#endif
-
-       /* pass parameters */
-       HOOK_DATA(0) = id;
-
-       /* Have to make hook_print_str a special case since we call with a
-        * parameter of byte type. Should perhaps be a separate
-        * hook_call. */
-
-       if (id == hook_print_str) {
-               int i;
-               char *str;
-
-               HOOK_DATA(1) = pcnt;
-
-               va_start(ap, pcnt);
-               str = (char *)va_arg(ap, unsigned);
-
-               for (i = 0; i != pcnt; i++)
-                       HOOK_DATA_BYTE(8 + i) = str[i];
-
-               HOOK_DATA_BYTE(8 + i) = 0;      /* null byte */
-       } else {
-               va_start(ap, pcnt);
-               for (i = 1; i <= pcnt; i++)
-                       HOOK_DATA(i) = va_arg(ap, unsigned);
-               va_end(ap);
-       }
-
-       /* read from mem to make sure data has propagated to memory before
-        * trigging */
-       ret = *((volatile unsigned *)HOOK_MEM_BASE_ADDR);
-
-       /* trigger hook */
-       HOOK_TRIG(id);
-
-       /* wait for call to finish */
-       while (VHOOK_DATA(0) > 0) ;
-
-       /* extract return value */
-
-       ret = VHOOK_DATA(1);
-
-#ifdef USING_SOS
-       PREEMPT_RESTORE();
-#endif
-       return ret;
-}
-
-unsigned hook_buf(unsigned i)
-{
-       return (HOOK_DATA(i));
-}
-
-void print_str(const char *str)
-{
-       int i;
-       /* find null at end of string */
-       for (i = 1; str[i]; i++) ;
-       hook_call(hook_print_str, i, str);
-}
-
-void CPU_KICK_DOG(void)
-{
-       (void)hook_call(hook_kick_dog, 0);
-}
-
-void CPU_WATCHDOG_TIMEOUT(unsigned t)
-{
-       (void)hook_call(hook_dog_timeout, 1, t);
-}
-
diff --git a/arch/cris/arch-v32/mach-fs/vcs_hook.h b/arch/cris/arch-v32/mach-fs/vcs_hook.h
deleted file mode 100644 (file)
index c000b9f..0000000
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Call simulator hook functions
- */
-
-#ifndef HOOK_H
-#define HOOK_H
-
-int hook_call(unsigned id, unsigned pcnt, ...);
-
-enum hook_ids {
-  hook_debug_on = 1,
-  hook_debug_off,
-  hook_stop_sim_ok,
-  hook_stop_sim_fail,
-  hook_alloc_shared,
-  hook_ptr_shared,
-  hook_free_shared,
-  hook_file2shared,
-  hook_cmp_shared,
-  hook_print_params,
-  hook_sim_time,
-  hook_stop_sim,
-  hook_kick_dog,
-  hook_dog_timeout,
-  hook_rand,
-  hook_srand,
-  hook_rand_range,
-  hook_print_str,
-  hook_print_hex,
-  hook_cmp_offset_shared,
-  hook_fill_random_shared,
-  hook_alloc_random_data,
-  hook_calloc_random_data,
-  hook_print_int,
-  hook_print_uint,
-  hook_fputc,
-  hook_init_fd,
-  hook_sbrk
-
-};
-
-#endif
index 0768bc4..3deca52 100644 (file)
@@ -73,11 +73,7 @@ void __init cris_mmu_init(void)
 #endif
                       REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
                       REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
-#ifndef CONFIG_ETRAX_VCS_SIM
                        REG_STATE(mmu, rw_mm_cfg, seg_a, page)   |
-#else
-                      REG_STATE(mmu, rw_mm_cfg, seg_a, linear) |
-#endif
                       REG_STATE(mmu, rw_mm_cfg, seg_9, page)   |
                       REG_STATE(mmu, rw_mm_cfg, seg_8, page)   |
                       REG_STATE(mmu, rw_mm_cfg, seg_7, page)   |
@@ -100,11 +96,7 @@ void __init cris_mmu_init(void)
 #endif
                          REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) |
                         REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) |
-#ifndef CONFIG_ETRAX_VCS_SIM
                         REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0x0) |
-#else
-                         REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa) |
-#endif
                         REG_FIELD(mmu, rw_mm_kbase_hi, base_9, 0x0) |
                         REG_FIELD(mmu, rw_mm_kbase_hi, base_8, 0x0));
 
index 20f1b48..e5b5aab 100644 (file)
  * selected bit it's possible to convert between KSEG_x and 0x40000000 where the
  * DRAM really resides. DRAM is virtually at 0xc.
  */
-#ifndef CONFIG_ETRAX_VCS_SIM
 #define __pa(x) ((unsigned long)(x) & 0x7fffffff)
 #define __va(x) ((void *)((unsigned long)(x) | 0x80000000))
-#else
-#define __pa(x) ((unsigned long)(x) & 0x3fffffff)
-#define __va(x) ((void *)((unsigned long)(x) | 0xc0000000))
-#endif
 
 #define VM_STACK_DEFAULT_FLAGS (VM_READ | VM_WRITE | \
                                 VM_MAYREAD | VM_MAYWRITE)
index 9603c90..a024b7d 100644 (file)
@@ -21,13 +21,9 @@ struct thread_struct {
 
 /*
  * User-space process size. This is hardcoded into a few places, so don't
- * changed it unless everything's clear!
+ * change it unless everything's clear!
  */
-#ifndef CONFIG_ETRAX_VCS_SIM
 #define TASK_SIZE      (0xB0000000UL)
-#else
-#define TASK_SIZE      (0xA0000000UL)
-#endif
 
 /* CCS I=1, enable interrupts. */
 #define INIT_THREAD { 0, 0, (1 << I_CCS_BITNR) }
index dd1abbd..96c3b0f 100644 (file)
        move.d   REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0
        move.d   CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1
        move.d   $r1, [$r0]
-#ifdef CONFIG_ETRAX_VCS_SIM
-       ;; Set up minimal flash waitstates
-       move.d 0, $r10
-       move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11
-       move.d $r10, [$r11]
-#endif
        .endm
 
 #endif