dtsi: sensors: Remove restrictions to run sensors at full speed
Robert Collins [Tue, 19 Jul 2016 01:01:26 +0000 (18:01 -0700)]
- Remove frequency restrictions on gyro, accel, compass, barometer.
- Remove barometer_disabled, if currently disabled.

Bug 200191681
Bug 200201316

Change-Id: If75f10034a4c14ebb4010ed4ae3a511e0bd2ade6
Signed-off-by: Robert Collins <rcollins@nvidia.com>
Reviewed-on: http://git-master/r/1183159
Reviewed-by: Akhilesh Khumbum <akhumbum@nvidia.com>
Reviewed-by: Erik Lilliebjerg <elilliebjerg@nvidia.com>
Tested-by: Erik Lilliebjerg <elilliebjerg@nvidia.com>
GVS: Gerrit_Virtual_Submit

arch/arm64/boot/dts/tegra210-platforms/tegra210-ers-sensor-e2160-1000-a00.dtsi
arch/arm64/boot/dts/tegra210-platforms/tegra210-hawkeye-sensor-p2290-1100-a00.dtsi
arch/arm64/boot/dts/tegra210-platforms/tegra210-jetson-cv-super-module-e2614.dtsi
arch/arm64/boot/dts/tegra210-platforms/tegra210-loki-e-sensor-p2530-0032-e00.dtsi

index 616ca8e..30174c8 100644 (file)
@@ -33,7 +33,6 @@
                        compatible = "ak,ak89xx";
                        reg = <0x0d>;
                        magnetic_field_matrix = [ff 00 00 00 ff 00 00 00 01];
-                       magnetic_field_delay_us_min = <16666>;
                };
 
                bmp280@77 {
index b8c290b..9c2334d 100644 (file)
@@ -36,7 +36,6 @@
                        vdd-supply = <&vdd_3v3>;                /* E2290 Main Board     */
                        vid-supply = <&max77620_sd3>;           /* E2290 Main Board     */
                        magnetic_field_matrix = [00 01 00 ff 00 00 00 00 01];
-                       magnetic_field_delay_us_min = <16666>;
                };
 
                cm32180@48 {
index 1cd6c0a..ad8c541 100644 (file)
                        compatible = "ak,ak89xx";
                        reg = <0x0d>;
                         magnetic_field_matrix = [01 00 00 00 01 00 00 00 01];
-                       magnetic_field_delay_us_min = <16666>;
                        status = "disabled";
                };
 
                bmp280_77: bmp280@77 {
                        compatible = "bmp,bmpX80";
                        reg = <0x77>;
-                       pressure_delay_us_min = <16666>;
-                       pressure_disable = <1>;
                        status = "disabled";
                };
 
index 4e4b2eb..b9d1f83 100644 (file)
@@ -33,7 +33,6 @@
                        compatible = "ak,ak89xx";
                        reg = <0x0c>;
                        magnetic_field_matrix = [01 00 00 00 ff 00 00 00 ff];
-                       magnetic_field_delay_us_min = <16666>;
                };
 
                jsa1127@39 {