[S390] convert dcssblk and extmem printks messages to pr_xxx macros.
Hongjie Yang [Thu, 25 Dec 2008 12:39:45 +0000 (13:39 +0100)]
Signed-off-by: Hongjie Yang <hongjie@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

arch/s390/mm/extmem.c
drivers/s390/block/dcssblk.c

index 580fc64..5c84571 100644 (file)
@@ -7,6 +7,9 @@
  * (C) IBM Corporation 2002-2004
  */
 
+#define KMSG_COMPONENT "extmem"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/spinlock.h>
 #include <asm/cpcmd.h>
 #include <asm/setup.h>
 
-#define DCSS_DEBUG     /* Debug messages on/off */
-
-#define DCSS_NAME "extmem"
-#ifdef DCSS_DEBUG
-#define PRINT_DEBUG(x...)      printk(KERN_DEBUG DCSS_NAME " debug:" x)
-#else
-#define PRINT_DEBUG(x...)   do {} while (0)
-#endif
-#define PRINT_INFO(x...)       printk(KERN_INFO DCSS_NAME " info:" x)
-#define PRINT_WARN(x...)       printk(KERN_WARNING DCSS_NAME " warning:" x)
-#define PRINT_ERR(x...)                printk(KERN_ERR DCSS_NAME " error:" x)
-
-
 #define DCSS_LOADSHR    0x00
 #define DCSS_LOADNSR    0x04
 #define DCSS_PURGESEG   0x08
@@ -286,7 +276,7 @@ query_segment_type (struct dcss_segment *seg)
                goto out_free;
        }
        if (diag_cc > 1) {
-               PRINT_WARN ("segment_type: diag returned error %ld\n", vmrc);
+               pr_warning("Querying a DCSS type failed with rc=%ld\n", vmrc);
                rc = dcss_diag_translate_rc (vmrc);
                goto out_free;
        }
@@ -368,7 +358,6 @@ query_segment_type (struct dcss_segment *seg)
  * -EIO     : could not perform query diagnose
  * -ENOENT  : no such segment
  * -ENOTSUPP: multi-part segment cannot be used with linux
- * -ENOSPC  : segment cannot be used (overlaps with storage)
  * -ENOMEM  : out of memory
  * 0 .. 6   : type of segment as defined in include/asm-s390/extmem.h
  */
@@ -480,9 +469,8 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
                goto out_resource;
        }
        if (diag_cc > 1) {
-               PRINT_WARN ("segment_load: could not load segment %s - "
-                               "diag returned error (%ld)\n",
-                               name, end_addr);
+               pr_warning("Loading DCSS %s failed with rc=%ld\n", name,
+                          end_addr);
                rc = dcss_diag_translate_rc(end_addr);
                dcss_diag(&purgeseg_scode, seg->dcss_name,
                                &dummy, &dummy);
@@ -496,15 +484,13 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
        *addr = seg->start_addr;
        *end  = seg->end;
        if (do_nonshared)
-               PRINT_INFO ("segment_load: loaded segment %s range %p .. %p "
-                               "type %s in non-shared mode\n", name,
-                               (void*)seg->start_addr, (void*)seg->end,
-                               segtype_string[seg->vm_segtype]);
+               pr_info("DCSS %s of range %p to %p and type %s loaded as "
+                       "exclusive-writable\n", name, (void*) seg->start_addr,
+                       (void*) seg->end, segtype_string[seg->vm_segtype]);
        else {
-               PRINT_INFO ("segment_load: loaded segment %s range %p .. %p "
-                               "type %s in shared mode\n", name,
-                               (void*)seg->start_addr, (void*)seg->end,
-                               segtype_string[seg->vm_segtype]);
+               pr_info("DCSS %s of range %p to %p and type %s loaded in "
+                       "shared access mode\n", name, (void*) seg->start_addr,
+                       (void*) seg->end, segtype_string[seg->vm_segtype]);
        }
        goto out;
  out_resource:
@@ -593,14 +579,14 @@ segment_modify_shared (char *name, int do_nonshared)
                goto out_unlock;
        }
        if (do_nonshared == seg->do_nonshared) {
-               PRINT_INFO ("segment_modify_shared: not reloading segment %s"
-                               " - already in requested mode\n",name);
+               pr_info("DCSS %s is already in the requested access "
+                       "mode\n", name);
                rc = 0;
                goto out_unlock;
        }
        if (atomic_read (&seg->ref_count) != 1) {
-               PRINT_WARN ("segment_modify_shared: not reloading segment %s - "
-                               "segment is in use by other driver(s)\n",name);
+               pr_warning("DCSS %s is in use and cannot be reloaded\n",
+                          name);
                rc = -EAGAIN;
                goto out_unlock;
        }
@@ -613,8 +599,8 @@ segment_modify_shared (char *name, int do_nonshared)
                        seg->res->flags |= IORESOURCE_READONLY;
 
        if (request_resource(&iomem_resource, seg->res)) {
-               PRINT_WARN("segment_modify_shared: could not reload segment %s"
-                          " - overlapping resources\n", name);
+               pr_warning("DCSS %s overlaps with used memory resources "
+                          "and cannot be reloaded\n", name);
                rc = -EBUSY;
                kfree(seg->res);
                goto out_del_mem;
@@ -632,9 +618,8 @@ segment_modify_shared (char *name, int do_nonshared)
                goto out_del_res;
        }
        if (diag_cc > 1) {
-               PRINT_WARN ("segment_modify_shared: could not reload segment %s"
-                               " - diag returned error (%ld)\n",
-                               name, end_addr);
+               pr_warning("Reloading DCSS %s failed with rc=%ld\n", name,
+                          end_addr);
                rc = dcss_diag_translate_rc(end_addr);
                goto out_del_res;
        }
@@ -673,8 +658,7 @@ segment_unload(char *name)
        mutex_lock(&dcss_lock);
        seg = segment_by_name (name);
        if (seg == NULL) {
-               PRINT_ERR ("could not find segment %s in segment_unload, "
-                               "please report to linux390@de.ibm.com\n",name);
+               pr_err("Unloading unknown DCSS %s failed\n", name);
                goto out_unlock;
        }
        if (atomic_dec_return(&seg->ref_count) != 0)
@@ -709,8 +693,7 @@ segment_save(char *name)
        seg = segment_by_name (name);
 
        if (seg == NULL) {
-               PRINT_ERR("could not find segment %s in segment_save, please "
-                         "report to linux390@de.ibm.com\n", name);
+               pr_err("Saving unknown DCSS %s failed\n", name);
                goto out;
        }
 
@@ -727,14 +710,14 @@ segment_save(char *name)
        response = 0;
        cpcmd(cmd1, NULL, 0, &response);
        if (response) {
-               PRINT_ERR("segment_save: DEFSEG failed with response code %i\n",
-                         response);
+               pr_err("Saving a DCSS failed with DEFSEG response code "
+                      "%i\n", response);
                goto out;
        }
        cpcmd(cmd2, NULL, 0, &response);
        if (response) {
-               PRINT_ERR("segment_save: SAVESEG failed with response code %i\n",
-                         response);
+               pr_err("Saving a DCSS failed with SAVESEG response code "
+                      "%i\n", response);
                goto out;
        }
 out:
@@ -749,44 +732,41 @@ void segment_warning(int rc, char *seg_name)
 {
        switch (rc) {
        case -ENOENT:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "does not exist\n", seg_name);
+               pr_err("DCSS %s cannot be loaded or queried\n", seg_name);
                break;
        case -ENOSYS:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "not running on VM\n", seg_name);
+               pr_err("DCSS %s cannot be loaded or queried without "
+                      "z/VM\n", seg_name);
                break;
        case -EIO:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "hardware error\n", seg_name);
+               pr_err("Loading or querying DCSS %s resulted in a "
+                      "hardware error\n", seg_name);
                break;
        case -ENOTSUPP:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "is a multi-part segment\n", seg_name);
+               pr_err("DCSS %s has multiple page ranges and cannot be "
+                      "loaded or queried\n", seg_name);
                break;
        case -ENOSPC:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "overlaps with storage\n", seg_name);
+               pr_err("DCSS %s overlaps with used storage and cannot "
+                      "be loaded\n", seg_name);
                break;
        case -EBUSY:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "overlaps with already loaded dcss\n", seg_name);
+               pr_err("%s needs used memory resources and cannot be "
+                      "loaded or queried\n", seg_name);
                break;
        case -EPERM:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "already loaded in incompatible mode\n", seg_name);
+               pr_err("DCSS %s is already loaded in a different access "
+                      "mode\n", seg_name);
                break;
        case -ENOMEM:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "out of memory\n", seg_name);
+               pr_err("There is not enough memory to load or query "
+                      "DCSS %s\n", seg_name);
                break;
        case -ERANGE:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "exceeds kernel mapping range\n", seg_name);
+               pr_err("DCSS %s exceeds the kernel mapping range (%lu) "
+                      "and cannot be loaded\n", seg_name, VMEM_MAX_PHYS);
                break;
        default:
-               PRINT_WARN("cannot load/query segment %s, "
-                          "return value %i\n", seg_name, rc);
                break;
        }
 }
index b1b204c..26ffc6a 100644 (file)
@@ -4,6 +4,9 @@
  * Authors: Carsten Otte, Stefan Weinhuber, Gerald Schaefer
  */
 
+#define KMSG_COMPONENT "dcssblk"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/ctype.h>
 #include <linux/interrupt.h>
 #include <asm/s390_rdev.h>
 
-//#define DCSSBLK_DEBUG                /* Debug messages on/off */
 #define DCSSBLK_NAME "dcssblk"
 #define DCSSBLK_MINORS_PER_DISK 1
 #define DCSSBLK_PARM_LEN 400
 #define DCSS_BUS_ID_SIZE 20
 
-#ifdef DCSSBLK_DEBUG
-#define PRINT_DEBUG(x...) printk(KERN_DEBUG DCSSBLK_NAME " debug: " x)
-#else
-#define PRINT_DEBUG(x...) do {} while (0)
-#endif
-#define PRINT_INFO(x...)  printk(KERN_INFO DCSSBLK_NAME " info: " x)
-#define PRINT_WARN(x...)  printk(KERN_WARNING DCSSBLK_NAME " warning: " x)
-#define PRINT_ERR(x...)          printk(KERN_ERR DCSSBLK_NAME " error: " x)
-
 static int dcssblk_open(struct block_device *bdev, fmode_t mode);
 static int dcssblk_release(struct gendisk *disk, fmode_t mode);
 static int dcssblk_make_request(struct request_queue *q, struct bio *bio);
@@ -262,10 +255,9 @@ dcssblk_is_continuous(struct dcssblk_dev_info *dev_info)
        /* check continuity */
        for (i = 0; i < dev_info->num_of_segments - 1; i++) {
                if ((sort_list[i].end + 1) != sort_list[i+1].start) {
-                       PRINT_ERR("Segment %s is not contiguous with "
-                               "segment %s\n",
-                               sort_list[i].segment_name,
-                               sort_list[i+1].segment_name);
+                       pr_err("Adjacent DCSSs %s and %s are not "
+                              "contiguous\n", sort_list[i].segment_name,
+                              sort_list[i+1].segment_name);
                        rc = -EINVAL;
                        goto out;
                }
@@ -276,10 +268,10 @@ dcssblk_is_continuous(struct dcssblk_dev_info *dev_info)
                                !(sort_list[i+1].segment_type &
                                SEGMENT_EXCLUSIVE) ||
                                (sort_list[i+1].segment_type == SEG_TYPE_ER)) {
-                               PRINT_ERR("Segment %s has different type from "
-                                       "segment %s\n",
-                                       sort_list[i].segment_name,
-                                       sort_list[i+1].segment_name);
+                               pr_err("DCSS %s and DCSS %s have "
+                                      "incompatible types\n",
+                                      sort_list[i].segment_name,
+                                      sort_list[i+1].segment_name);
                                rc = -EINVAL;
                                goto out;
                        }
@@ -381,8 +373,9 @@ dcssblk_shared_store(struct device *dev, struct device_attribute *attr, const ch
        } else if (inbuf[0] == '0') {
                /* reload segments in exclusive mode */
                if (dev_info->segment_type == SEG_TYPE_SC) {
-                       PRINT_ERR("Segment type SC (%s) cannot be loaded in "
-                               "non-shared mode\n", dev_info->segment_name);
+                       pr_err("DCSS %s is of type SC and cannot be "
+                              "loaded as exclusive-writable\n",
+                              dev_info->segment_name);
                        rc = -EINVAL;
                        goto out;
                }
@@ -405,9 +398,8 @@ dcssblk_shared_store(struct device *dev, struct device_attribute *attr, const ch
        goto out;
 
 removeseg:
-       PRINT_ERR("Could not reload segment(s) of the device %s, removing "
-               "segment(s) now!\n",
-               dev_info->segment_name);
+       pr_err("DCSS device %s is removed after a failed access mode "
+              "change\n", dev_info->segment_name);
        temp = entry;
        list_for_each_entry(entry, &dev_info->seg_list, lh) {
                if (entry != temp)
@@ -455,17 +447,17 @@ dcssblk_save_store(struct device *dev, struct device_attribute *attr, const char
        if (inbuf[0] == '1') {
                if (atomic_read(&dev_info->use_count) == 0) {
                        // device is idle => we save immediately
-                       PRINT_INFO("Saving segment(s) of the device %s\n",
-                                  dev_info->segment_name);
+                       pr_info("All DCSSs that map to device %s are "
+                               "saved\n", dev_info->segment_name);
                        list_for_each_entry(entry, &dev_info->seg_list, lh) {
                                segment_save(entry->segment_name);
                        }
                }  else {
                        // device is busy => we save it when it becomes
                        // idle in dcssblk_release
-                       PRINT_INFO("Device %s is currently busy, segment(s) "
-                                  "will be saved when it becomes idle...\n",
-                                  dev_info->segment_name);
+                       pr_info("Device %s is in use, its DCSSs will be "
+                               "saved when it becomes idle\n",
+                               dev_info->segment_name);
                        dev_info->save_pending = 1;
                }
        } else if (inbuf[0] == '0') {
@@ -473,9 +465,9 @@ dcssblk_save_store(struct device *dev, struct device_attribute *attr, const char
                        // device is busy & the user wants to undo his save
                        // request
                        dev_info->save_pending = 0;
-                       PRINT_INFO("Pending save for segment(s) of the device "
-                                       "%s deactivated\n",
-                                       dev_info->segment_name);
+                       pr_info("A pending save request for device %s "
+                               "has been canceled\n",
+                               dev_info->segment_name);
                }
        } else {
                up_write(&dcssblk_devices_sem);
@@ -615,9 +607,8 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 
        seg_byte_size = (dev_info->end - dev_info->start + 1);
        set_capacity(dev_info->gd, seg_byte_size >> 9); // size in sectors
-       PRINT_INFO("Loaded segment(s) %s, size = %lu Byte, "
-                  "capacity = %lu (512 Byte) sectors\n", local_buf,
-                  seg_byte_size, seg_byte_size >> 9);
+       pr_info("Loaded %s with total size %lu bytes and capacity %lu "
+               "sectors\n", local_buf, seg_byte_size, seg_byte_size >> 9);
 
        dev_info->save_pending = 0;
        dev_info->is_shared = 1;
@@ -745,13 +736,15 @@ dcssblk_remove_store(struct device *dev, struct device_attribute *attr, const ch
        dev_info = dcssblk_get_device_by_name(local_buf);
        if (dev_info == NULL) {
                up_write(&dcssblk_devices_sem);
-               PRINT_WARN("Device %s is not loaded!\n", local_buf);
+               pr_warning("Device %s cannot be removed because it is not a "
+                          "known device\n", local_buf);
                rc = -ENODEV;
                goto out_buf;
        }
        if (atomic_read(&dev_info->use_count) != 0) {
                up_write(&dcssblk_devices_sem);
-               PRINT_WARN("Device %s is in use!\n", local_buf);
+               pr_warning("Device %s cannot be removed while it is in "
+                          "use\n", local_buf);
                rc = -EBUSY;
                goto out_buf;
        }
@@ -808,8 +801,8 @@ dcssblk_release(struct gendisk *disk, fmode_t mode)
        down_write(&dcssblk_devices_sem);
        if (atomic_dec_and_test(&dev_info->use_count)
            && (dev_info->save_pending)) {
-               PRINT_INFO("Device %s became idle and is being saved now\n",
-                           dev_info->segment_name);
+               pr_info("Device %s has become idle and is being saved "
+                       "now\n", dev_info->segment_name);
                list_for_each_entry(entry, &dev_info->seg_list, lh) {
                        segment_save(entry->segment_name);
                }
@@ -852,7 +845,8 @@ dcssblk_make_request(struct request_queue *q, struct bio *bio)
                case SEG_TYPE_SC:
                        /* cannot write to these segments */
                        if (bio_data_dir(bio) == WRITE) {
-                               PRINT_WARN("rejecting write to ro device %s\n",
+                               pr_warning("Writing to %s failed because it "
+                                          "is a read-only device\n",
                                           dev_name(&dev_info->dev));
                                goto fail;
                        }