regulator: TPS65910: Move regulator defs to header
Kyle Manna [Thu, 3 Nov 2011 17:08:05 +0000 (12:08 -0500)]
Move the regulator defintions to the header so that platform board file
can use them to configure specific regulators.

Signed-off-by: Kyle Manna <kyle.manna@fuel7.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/tps65910-regulator.c
include/linux/mfd/tps65910.h

index 66d2d60..44b4f22 100644 (file)
 #include <linux/gpio.h>
 #include <linux/mfd/tps65910.h>
 
-#define TPS65910_REG_VRTC              0
-#define TPS65910_REG_VIO               1
-#define TPS65910_REG_VDD1              2
-#define TPS65910_REG_VDD2              3
-#define TPS65910_REG_VDD3              4
-#define TPS65910_REG_VDIG1             5
-#define TPS65910_REG_VDIG2             6
-#define TPS65910_REG_VPLL              7
-#define TPS65910_REG_VDAC              8
-#define TPS65910_REG_VAUX1             9
-#define TPS65910_REG_VAUX2             10
-#define TPS65910_REG_VAUX33            11
-#define TPS65910_REG_VMMC              12
-
-#define TPS65911_REG_VDDCTRL           4
-#define TPS65911_REG_LDO1              5
-#define TPS65911_REG_LDO2              6
-#define TPS65911_REG_LDO3              7
-#define TPS65911_REG_LDO4              8
-#define TPS65911_REG_LDO5              9
-#define TPS65911_REG_LDO6              10
-#define TPS65911_REG_LDO7              11
-#define TPS65911_REG_LDO8              12
-
 #define TPS65910_SUPPLY_STATE_ENABLED  0x1
 
 /* supported VIO voltages in milivolts */
index 82b4c88..fc5205d 100644 (file)
 #define TPS65910_GPIO_STS                              BIT(1)
 #define TPS65910_GPIO_SET                              BIT(0)
 
+/* Regulator Index Definitions */
+#define TPS65910_REG_VRTC                              0
+#define TPS65910_REG_VIO                               1
+#define TPS65910_REG_VDD1                              2
+#define TPS65910_REG_VDD2                              3
+#define TPS65910_REG_VDD3                              4
+#define TPS65910_REG_VDIG1                             5
+#define TPS65910_REG_VDIG2                             6
+#define TPS65910_REG_VPLL                              7
+#define TPS65910_REG_VDAC                              8
+#define TPS65910_REG_VAUX1                             9
+#define TPS65910_REG_VAUX2                             10
+#define TPS65910_REG_VAUX33                            11
+#define TPS65910_REG_VMMC                              12
+
+#define TPS65911_REG_VDDCTRL                           4
+#define TPS65911_REG_LDO1                              5
+#define TPS65911_REG_LDO2                              6
+#define TPS65911_REG_LDO3                              7
+#define TPS65911_REG_LDO4                              8
+#define TPS65911_REG_LDO5                              9
+#define TPS65911_REG_LDO6                              10
+#define TPS65911_REG_LDO7                              11
+#define TPS65911_REG_LDO8                              12
+
 /**
  * struct tps65910_board
  * Board platform data may be used to initialize regulators.