uwb: add the UWB stack (build system)
Greg Kroah-Hartman [Wed, 17 Sep 2008 15:34:11 +0000 (16:34 +0100)]
The Kbuild and Kconfig files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Vrabel <david.vrabel@csr.com>

arch/arm/Kconfig
arch/cris/Kconfig
arch/h8300/Kconfig
drivers/Kconfig
drivers/Makefile
drivers/uwb/Kconfig [new file with mode: 0644]
drivers/uwb/Makefile [new file with mode: 0644]

index 70dba16..8eedbfa 100644 (file)
@@ -1220,6 +1220,8 @@ source "drivers/hid/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "drivers/mmc/Kconfig"
 
 source "drivers/leds/Kconfig"
index 9389d38..cb66c4d 100644 (file)
@@ -677,6 +677,8 @@ source "fs/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "arch/cris/Kconfig.debug"
 
 source "security/Kconfig"
index 396ab05..2b41332 100644 (file)
@@ -213,6 +213,8 @@ source "drivers/hwmon/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
index 59f33fa..9b399a1 100644 (file)
@@ -78,6 +78,8 @@ source "drivers/hid/Kconfig"
 
 source "drivers/usb/Kconfig"
 
+source "drivers/uwb/Kconfig"
+
 source "drivers/mmc/Kconfig"
 
 source "drivers/memstick/Kconfig"
index 2735bde..1a6930f 100644 (file)
@@ -99,3 +99,4 @@ obj-$(CONFIG_OF)              += of/
 obj-$(CONFIG_SSB)              += ssb/
 obj-$(CONFIG_VIRTIO)           += virtio/
 obj-$(CONFIG_REGULATOR)                += regulator/
+obj-$(CONFIG_UWB)              += uwb/
diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
new file mode 100644 (file)
index 0000000..3f01a69
--- /dev/null
@@ -0,0 +1,28 @@
+#
+# UWB device configuration
+#
+
+menuconfig UWB
+       tristate "Ultra Wide Band devices"
+       depends on PCI
+       default n
+       help
+         UWB is a high-bandwidth, low-power, point-to-point radio
+         technology using a wide spectrum (3.1-10.6GHz). It is
+         optimized for in-room use (480Mbps at 2 meters, 110Mbps at
+         10m). It serves as the transport layer for other protocols,
+         such as Wireless USB (WUSB), IP (WLP) and upcoming
+         Bluetooth and 1394
+
+         The topology is peer to peer; however, higher level
+         protocols (such as WUSB) might impose a master/slave
+         relationship.
+
+         Say Y here if your computer has UWB radio controllers (USB or PCI)
+         based. You will need to enable the radio controllers
+         below.  It is ok to select all of them, no harm done.
+
+         For more help check the UWB and WUSB related files in
+         <file:Documentation/usb/>.
+
+         To compile the UWB stack as a module, choose M here.
diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile
new file mode 100644 (file)
index 0000000..9a67be5
--- /dev/null
@@ -0,0 +1,20 @@
+obj-$(CONFIG_UWB)              += uwb.o
+
+uwb-objs :=            \
+       address.o       \
+       beacon.o        \
+       driver.o        \
+       drp.o           \
+       drp-avail.o     \
+       drp-ie.o        \
+       est.o           \
+       ie.o            \
+       lc-dev.o        \
+       lc-rc.o         \
+       neh.o           \
+       pal.o           \
+       reset.o         \
+       rsv.o           \
+       scan.o          \
+       uwb-debug.o     \
+       uwbd.o