Merge branch 'master' into for-2.6.33
Jens Axboe [Thu, 3 Dec 2009 12:49:39 +0000 (13:49 +0100)]
966 files changed:
.gitignore
Documentation/fb/framebuffer.txt
Documentation/filesystems/caching/fscache.txt
Documentation/filesystems/caching/netfs-api.txt
Documentation/filesystems/ext4.txt
Documentation/filesystems/ocfs2.txt
Documentation/i2c/busses/i2c-piix4
Documentation/slow-work.txt
Documentation/sound/alsa/ALSA-Configuration.txt
Documentation/thermal/sysfs-api.txt
Documentation/trace/ftrace.txt
Documentation/vm/page-types.c
MAINTAINERS
Makefile
arch/alpha/boot/tools/objstrip.c
arch/alpha/include/asm/fcntl.h
arch/alpha/include/asm/thread_info.h
arch/alpha/kernel/core_marvel.c
arch/alpha/kernel/core_titan.c
arch/alpha/kernel/irq.c
arch/alpha/kernel/irq_alpha.c
arch/alpha/kernel/irq_i8259.c
arch/alpha/kernel/irq_pyxis.c
arch/alpha/kernel/irq_srm.c
arch/alpha/kernel/sys_alcor.c
arch/alpha/kernel/sys_cabriolet.c
arch/alpha/kernel/sys_dp264.c
arch/alpha/kernel/sys_eb64p.c
arch/alpha/kernel/sys_eiger.c
arch/alpha/kernel/sys_jensen.c
arch/alpha/kernel/sys_marvel.c
arch/alpha/kernel/sys_mikasa.c
arch/alpha/kernel/sys_noritake.c
arch/alpha/kernel/sys_rawhide.c
arch/alpha/kernel/sys_ruffian.c
arch/alpha/kernel/sys_rx164.c
arch/alpha/kernel/sys_sable.c
arch/alpha/kernel/sys_takara.c
arch/alpha/kernel/sys_titan.c
arch/alpha/kernel/sys_wildfire.c
arch/arm/configs/ams_delta_defconfig
arch/arm/configs/kirkwood_defconfig
arch/arm/configs/omap3_pandora_defconfig
arch/arm/configs/omap_3430sdp_defconfig
arch/arm/configs/orion5x_defconfig
arch/arm/include/asm/cacheflush.h
arch/arm/include/asm/kmap_types.h
arch/arm/include/asm/unistd.h
arch/arm/kernel/entry-armv.S
arch/arm/kernel/head-common.S
arch/arm/kernel/signal.c
arch/arm/kernel/signal.h
arch/arm/kernel/smp_scu.c
arch/arm/kernel/traps.c
arch/arm/kernel/unwind.c
arch/arm/mach-at91/Kconfig
arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
arch/arm/mach-at91/include/mach/cpu.h
arch/arm/mach-ep93xx/micro9.c
arch/arm/mach-integrator/include/mach/memory.h
arch/arm/mach-kirkwood/addr-map.c
arch/arm/mach-kirkwood/common.c
arch/arm/mach-kirkwood/include/mach/bridge-regs.h
arch/arm/mach-kirkwood/include/mach/io.h
arch/arm/mach-kirkwood/include/mach/kirkwood.h
arch/arm/mach-kirkwood/openrd_base-setup.c
arch/arm/mach-kirkwood/pcie.c
arch/arm/mach-ks8695/include/mach/regs-switch.h
arch/arm/mach-mmp/include/mach/mfp-pxa910.h
arch/arm/mach-mv78xx0/common.c
arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
arch/arm/mach-omap2/board-omap3beagle.c
arch/arm/mach-omap2/board-omap3pandora.c
arch/arm/mach-omap2/board-zoom2.c
arch/arm/mach-omap2/clock34xx.c
arch/arm/mach-omap2/clock34xx.h
arch/arm/mach-omap2/gpmc.c
arch/arm/mach-omap2/mailbox.c
arch/arm/mach-pxa/colibri-pxa320.c
arch/arm/mach-pxa/cpufreq-pxa2xx.c
arch/arm/mach-pxa/cpufreq-pxa3xx.c
arch/arm/mach-pxa/hx4700.c
arch/arm/mach-pxa/include/mach/entry-macro.S
arch/arm/mach-pxa/irq.c
arch/arm/mach-pxa/palmtc.c
arch/arm/mach-pxa/spitz.c
arch/arm/mach-realview/Kconfig
arch/arm/mach-realview/core.c
arch/arm/mach-realview/core.h
arch/arm/mach-realview/include/mach/board-pb1176.h
arch/arm/mach-realview/include/mach/board-pb11mp.h
arch/arm/mach-realview/include/mach/memory.h
arch/arm/mach-realview/include/mach/platform.h
arch/arm/mach-realview/include/mach/system.h
arch/arm/mach-realview/platsmp.c
arch/arm/mach-realview/realview_eb.c
arch/arm/mach-realview/realview_pb1176.c
arch/arm/mach-realview/realview_pb11mp.c
arch/arm/mach-realview/realview_pba8.c
arch/arm/mach-realview/realview_pbx.c
arch/arm/mach-s3c2410/gpio.c
arch/arm/mach-s3c2410/include/mach/dma.h
arch/arm/mach-s3c2440/Kconfig
arch/arm/mach-s3c2440/mach-mini2440.c
arch/arm/mach-s3c6400/include/mach/dma.h
arch/arm/mach-s3c6410/Kconfig
arch/arm/mach-s3c6410/mach-smdk6410.c
arch/arm/mach-u300/core.c
arch/arm/mm/context.c
arch/arm/mm/dma-mapping.c
arch/arm/mm/flush.c
arch/arm/mm/init.c
arch/arm/mm/mmu.c
arch/arm/mm/proc-v6.S
arch/arm/mm/proc-v7.S
arch/arm/plat-omap/cpu-omap.c
arch/arm/plat-omap/dma.c
arch/arm/plat-omap/gpio.c
arch/arm/plat-pxa/include/plat/mfp.h
arch/arm/plat-pxa/mfp.c
arch/arm/plat-s3c24xx/adc.c
arch/arm/plat-s3c24xx/cpu.c
arch/arm/plat-s3c24xx/dma.c
arch/arm/plat-s3c24xx/gpio.c
arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
arch/arm/plat-s3c24xx/include/plat/s3c2410.h
arch/arm/plat-s3c64xx/dma.c
arch/arm/plat-s3c64xx/include/plat/regs-clock.h
arch/arm/plat-s3c64xx/s3c6400-clock.c
arch/arm/tools/mach-types
arch/avr32/mach-at32ap/include/mach/cpu.h
arch/blackfin/kernel/bfin_dma_5xx.c
arch/blackfin/kernel/cplb-mpu/cplbinit.c
arch/blackfin/kernel/process.c
arch/blackfin/kernel/ptrace.c
arch/blackfin/mach-bf518/include/mach/anomaly.h
arch/blackfin/mach-bf527/include/mach/anomaly.h
arch/blackfin/mach-bf533/include/mach/anomaly.h
arch/blackfin/mach-bf537/include/mach/anomaly.h
arch/blackfin/mach-bf538/include/mach/anomaly.h
arch/blackfin/mach-bf548/include/mach/anomaly.h
arch/blackfin/mach-bf561/atomic.S
arch/blackfin/mach-bf561/include/mach/anomaly.h
arch/blackfin/mach-common/arch_checks.c
arch/blackfin/mach-common/smp.c
arch/ia64/include/asm/spinlock.h
arch/ia64/include/asm/spinlock_types.h
arch/ia64/kernel/mca.c
arch/ia64/kernel/unaligned.c
arch/ia64/mm/tlb.c
arch/ia64/pci/pci.c
arch/ia64/sn/kernel/io_common.c
arch/ia64/sn/kernel/sn2/sn_hwperf.c
arch/m32r/Kconfig
arch/m32r/boot/compressed/Makefile
arch/m32r/boot/compressed/misc.c
arch/m32r/kernel/smp.c
arch/m32r/kernel/time.c
arch/m32r/kernel/vmlinux.lds.S
arch/mips/Kconfig
arch/mips/alchemy/common/irq.c
arch/mips/alchemy/mtx-1/board_setup.c
arch/mips/ar7/platform.c
arch/mips/bcm47xx/prom.c
arch/mips/bcm63xx/Makefile
arch/mips/bcm63xx/boards/board_bcm963xx.c
arch/mips/bcm63xx/cpu.c
arch/mips/bcm63xx/dev-uart.c
arch/mips/bcm63xx/dev-wdt.c [new file with mode: 0644]
arch/mips/bcm63xx/setup.c
arch/mips/cavium-octeon/octeon-irq.c
arch/mips/cavium-octeon/smp.c
arch/mips/configs/rbtx49xx_defconfig
arch/mips/include/asm/dma-mapping.h
arch/mips/include/asm/fixmap.h
arch/mips/include/asm/gcmpregs.h
arch/mips/include/asm/gic.h
arch/mips/include/asm/mach-ar7/ar7.h
arch/mips/include/asm/mach-au1x00/gpio-au1000.h
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h [deleted file]
arch/mips/include/asm/mach-ip27/topology.h
arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
arch/mips/include/asm/mman.h
arch/mips/include/asm/mmu_context.h
arch/mips/include/asm/setup.h
arch/mips/include/asm/smtc_ipi.h
arch/mips/include/asm/spram.h [new file with mode: 0644]
arch/mips/include/asm/system.h
arch/mips/include/asm/thread_info.h
arch/mips/jazz/irq.c
arch/mips/kernel/cevt-bcm1480.c
arch/mips/kernel/cevt-ds1287.c
arch/mips/kernel/cevt-gt641xx.c
arch/mips/kernel/cevt-r4k.c
arch/mips/kernel/cevt-sb1250.c
arch/mips/kernel/cevt-smtc.c
arch/mips/kernel/cevt-txx9.c
arch/mips/kernel/cpu-probe.c
arch/mips/kernel/head.S
arch/mips/kernel/i8253.c
arch/mips/kernel/irq-gic.c
arch/mips/kernel/linux32.c
arch/mips/kernel/scall64-o32.S
arch/mips/kernel/smtc.c
arch/mips/kernel/spram.c
arch/mips/kernel/syscall.c
arch/mips/kernel/vpe.c
arch/mips/loongson/common/irq.c
arch/mips/math-emu/cp1emu.c
arch/mips/math-emu/dp_simple.c
arch/mips/math-emu/sp_simple.c
arch/mips/mm/dma-default.c
arch/mips/mm/init.c
arch/mips/mti-malta/malta-amon.c
arch/mips/mti-malta/malta-int.c
arch/mips/mti-malta/malta-memory.c
arch/mips/mti-malta/malta-pci.c
arch/mips/nxp/pnx8550/common/int.c
arch/mips/nxp/pnx8550/common/time.c
arch/mips/oprofile/op_model_loongson2.c
arch/mips/rb532/devices.c
arch/mips/rb532/prom.c
arch/mips/sgi-ip27/ip27-timer.c
arch/mips/sni/time.c
arch/mips/txx9/generic/setup.c
arch/parisc/include/asm/fcntl.h
arch/parisc/kernel/unwind.c
arch/parisc/kernel/vmlinux.lds.S
arch/powerpc/Kconfig
arch/powerpc/boot/addRamDisk.c
arch/powerpc/boot/dts/mpc8377_wlan.dts
arch/powerpc/boot/dts/mpc8569mds.dts
arch/powerpc/boot/dts/sbc8548.dts
arch/powerpc/configs/83xx/asp8347_defconfig
arch/powerpc/configs/83xx/kmeter1_defconfig
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
arch/powerpc/configs/83xx/mpc832x_mds_defconfig
arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
arch/powerpc/configs/83xx/mpc834x_itx_defconfig
arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
arch/powerpc/configs/83xx/mpc834x_mds_defconfig
arch/powerpc/configs/83xx/mpc836x_mds_defconfig
arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
arch/powerpc/configs/83xx/mpc837x_mds_defconfig
arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
arch/powerpc/configs/83xx/sbc834x_defconfig
arch/powerpc/configs/85xx/ksi8560_defconfig
arch/powerpc/configs/85xx/mpc8540_ads_defconfig
arch/powerpc/configs/85xx/mpc8560_ads_defconfig
arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
arch/powerpc/configs/85xx/sbc8548_defconfig
arch/powerpc/configs/85xx/sbc8560_defconfig
arch/powerpc/configs/85xx/socrates_defconfig
arch/powerpc/configs/85xx/stx_gp3_defconfig
arch/powerpc/configs/85xx/tqm8540_defconfig
arch/powerpc/configs/85xx/tqm8541_defconfig
arch/powerpc/configs/85xx/tqm8548_defconfig
arch/powerpc/configs/85xx/tqm8555_defconfig
arch/powerpc/configs/85xx/tqm8560_defconfig
arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
arch/powerpc/configs/86xx/gef_ppc9a_defconfig
arch/powerpc/configs/86xx/gef_sbc310_defconfig
arch/powerpc/configs/86xx/gef_sbc610_defconfig
arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
arch/powerpc/configs/86xx/sbc8641d_defconfig
arch/powerpc/configs/adder875_defconfig
arch/powerpc/configs/c2k_defconfig
arch/powerpc/configs/ep8248e_defconfig
arch/powerpc/configs/ep88xc_defconfig
arch/powerpc/configs/linkstation_defconfig
arch/powerpc/configs/mgcoge_defconfig
arch/powerpc/configs/mgsuvd_defconfig
arch/powerpc/configs/mpc7448_hpc2_defconfig
arch/powerpc/configs/mpc8272_ads_defconfig
arch/powerpc/configs/mpc83xx_defconfig
arch/powerpc/configs/mpc85xx_defconfig
arch/powerpc/configs/mpc85xx_smp_defconfig
arch/powerpc/configs/mpc866_ads_defconfig
arch/powerpc/configs/mpc86xx_defconfig
arch/powerpc/configs/mpc885_ads_defconfig
arch/powerpc/configs/pasemi_defconfig
arch/powerpc/configs/pq2fads_defconfig
arch/powerpc/configs/prpmc2800_defconfig
arch/powerpc/configs/storcenter_defconfig
arch/powerpc/include/asm/kmap_types.h
arch/powerpc/kernel/time.c
arch/powerpc/kvm/timing.h
arch/powerpc/mm/mmu_context_nohash.c
arch/powerpc/platforms/82xx/ep8248e.c
arch/powerpc/platforms/pseries/msi.c
arch/powerpc/platforms/pseries/xics.c
arch/s390/kernel/early.c
arch/s390/kernel/entry.S
arch/s390/kernel/entry64.S
arch/sh/include/asm/rwsem.h
arch/sh/kernel/cpu/irq/imask.c
arch/sh/kernel/cpu/irq/intc-sh5.c
arch/sh/kernel/dwarf.c
arch/sh/mm/cache-sh4.c
arch/sparc/boot/btfixupprep.c
arch/sparc/boot/piggyback_32.c
arch/sparc/boot/piggyback_64.c
arch/sparc/include/asm/system_64.h
arch/sparc/kernel/prom_common.c
arch/sparc/kernel/visemul.c
arch/sparc/mm/init_64.h
arch/x86/Kconfig
arch/x86/Kconfig.cpu
arch/x86/Makefile
arch/x86/ia32/ia32entry.S
arch/x86/include/asm/amd_iommu.h
arch/x86/include/asm/desc.h
arch/x86/include/asm/dma-mapping.h
arch/x86/include/asm/processor.h
arch/x86/include/asm/topology.h
arch/x86/kernel/acpi/processor.c
arch/x86/kernel/amd_iommu.c
arch/x86/kernel/amd_iommu_init.c
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
arch/x86/kernel/cpu/cpufreq/longhaul.c
arch/x86/kernel/cpu/cpufreq/powernow-k8.c
arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
arch/x86/kernel/cpu/mtrr/cleanup.c
arch/x86/kernel/crash_dump_32.c
arch/x86/kernel/efi.c
arch/x86/kernel/microcode_amd.c
arch/x86/kernel/pci-dma.c
arch/x86/kernel/process_64.c
arch/x86/kernel/reboot.c
arch/x86/kernel/setup.c
arch/x86/kvm/x86.c
arch/x86/mm/ioremap.c
arch/x86/xen/enlighten.c
crypto/async_tx/Kconfig
crypto/async_tx/async_pq.c
crypto/async_tx/async_xor.c
crypto/gcm.c
drivers/acpi/acpica/acconfig.h
drivers/acpi/acpica/acpredef.h
drivers/acpi/acpica/exregion.c
drivers/acpi/blacklist.c
drivers/acpi/power_meter.c
drivers/acpi/proc.c
drivers/acpi/processor_core.c
drivers/acpi/processor_throttling.c
drivers/acpi/sleep.c
drivers/acpi/video.c
drivers/ata/ahci.c
drivers/ata/libata-core.c
drivers/ata/sata_fsl.c
drivers/ata/sata_via.c
drivers/base/power/main.c
drivers/base/power/runtime.c
drivers/block/aoe/aoecmd.c
drivers/bluetooth/btusb.c
drivers/char/agp/intel-agp.c
drivers/char/hvc_xen.c
drivers/char/keyboard.c
drivers/char/tty_port.c
drivers/char/vt_ioctl.c
drivers/cpufreq/cpufreq.c
drivers/cpufreq/cpufreq_conservative.c
drivers/cpufreq/cpufreq_ondemand.c
drivers/crypto/padlock-aes.c
drivers/dma/Kconfig
drivers/dma/dmaengine.c
drivers/dma/ioat/dca.c
drivers/dma/ioat/dma.h
drivers/dma/ioat/dma_v2.c
drivers/dma/ioat/dma_v3.c
drivers/dma/ioat/hw.h
drivers/dma/ioat/registers.h
drivers/dma/shdma.c
drivers/edac/amd64_edac.c
drivers/firewire/ohci.c
drivers/gpio/gpiolib.c
drivers/gpio/langwell_gpio.c
drivers/gpu/drm/Kconfig
drivers/gpu/drm/drm_crtc_helper.c
drivers/gpu/drm/drm_edid.c
drivers/gpu/drm/drm_fb_helper.c
drivers/gpu/drm/drm_gem.c
drivers/gpu/drm/drm_mm.c
drivers/gpu/drm/i915/i915_debugfs.c
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_drv.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_irq.c
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/i915_suspend.c
drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/intel_crt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
drivers/gpu/drm/i915/intel_hdmi.c
drivers/gpu/drm/i915/intel_lvds.c
drivers/gpu/drm/radeon/Makefile
drivers/gpu/drm/radeon/atom.c
drivers/gpu/drm/radeon/atombios.h
drivers/gpu/drm/radeon/atombios_crtc.c
drivers/gpu/drm/radeon/mkregtable.c
drivers/gpu/drm/radeon/r100.c
drivers/gpu/drm/radeon/r300.c
drivers/gpu/drm/radeon/r420.c
drivers/gpu/drm/radeon/r500_reg.h
drivers/gpu/drm/radeon/r520.c
drivers/gpu/drm/radeon/r600.c
drivers/gpu/drm/radeon/r600_blit.c
drivers/gpu/drm/radeon/r600_blit_kms.c
drivers/gpu/drm/radeon/r600_cs.c
drivers/gpu/drm/radeon/r600d.h
drivers/gpu/drm/radeon/radeon.h
drivers/gpu/drm/radeon/radeon_agp.c
drivers/gpu/drm/radeon/radeon_asic.h
drivers/gpu/drm/radeon/radeon_atombios.c
drivers/gpu/drm/radeon/radeon_benchmark.c
drivers/gpu/drm/radeon/radeon_bios.c
drivers/gpu/drm/radeon/radeon_clocks.c
drivers/gpu/drm/radeon/radeon_combios.c
drivers/gpu/drm/radeon/radeon_connectors.c
drivers/gpu/drm/radeon/radeon_cursor.c
drivers/gpu/drm/radeon/radeon_device.c
drivers/gpu/drm/radeon/radeon_display.c
drivers/gpu/drm/radeon/radeon_encoders.c
drivers/gpu/drm/radeon/radeon_gart.c
drivers/gpu/drm/radeon/radeon_irq_kms.c
drivers/gpu/drm/radeon/radeon_legacy_crtc.c
drivers/gpu/drm/radeon/radeon_legacy_encoders.c
drivers/gpu/drm/radeon/radeon_mode.h
drivers/gpu/drm/radeon/radeon_pm.c [new file with mode: 0644]
drivers/gpu/drm/radeon/radeon_reg.h
drivers/gpu/drm/radeon/radeon_test.c
drivers/gpu/drm/radeon/radeon_ttm.c
drivers/gpu/drm/radeon/rs400.c
drivers/gpu/drm/radeon/rs600.c
drivers/gpu/drm/radeon/rs690.c
drivers/gpu/drm/radeon/rv515.c
drivers/gpu/drm/radeon/rv770.c
drivers/gpu/drm/radeon/rv770d.h
drivers/gpu/drm/ttm/ttm_tt.c
drivers/hwmon/adt7475.c
drivers/hwmon/s3c-hwmon.c
drivers/i2c/busses/Kconfig
drivers/i2c/busses/i2c-imx.c
drivers/i2c/busses/i2c-mpc.c
drivers/i2c/busses/i2c-piix4.c
drivers/i2c/busses/i2c-pnx.c
drivers/i2c/chips/tsl2550.c
drivers/i2c/i2c-core.c
drivers/ide/ide-ioctls.c
drivers/ide/ide-probe.c
drivers/ieee802154/fakehard.c
drivers/input/ff-core.c
drivers/input/ff-memless.c
drivers/input/input.c
drivers/input/keyboard/atkbd.c
drivers/input/keyboard/gpio_keys.c
drivers/input/misc/Kconfig
drivers/input/mouse/lifebook.c
drivers/input/mouse/psmouse-base.c
drivers/input/serio/i8042-x86ia64io.h
drivers/input/serio/i8042.c
drivers/isdn/hardware/eicon/maintidi.c
drivers/isdn/hardware/eicon/message.c
drivers/isdn/hardware/mISDN/hfcmulti.c
drivers/isdn/hisax/amd7930_fn.c
drivers/isdn/hisax/diva.c
drivers/isdn/hisax/elsa_ser.c
drivers/isdn/hisax/hfc_usb.c
drivers/isdn/hisax/hscx_irq.c
drivers/isdn/hisax/icc.c
drivers/isdn/i4l/isdn_ppp.c
drivers/isdn/mISDN/stack.c
drivers/leds/leds-gpio.c
drivers/md/md.c
drivers/md/raid1.c
drivers/md/raid5.c
drivers/media/common/ir-functions.c
drivers/media/common/tuners/tda18271-fe.c
drivers/media/dvb/dvb-core/dvb_frontend.c
drivers/media/dvb/dvb-usb/Kconfig
drivers/media/dvb/dvb-usb/ce6230.c
drivers/media/dvb/dvb-usb/cxusb.c
drivers/media/dvb/dvb-usb/dib0700_devices.c
drivers/media/dvb/firewire/firedtv-avc.c
drivers/media/dvb/firewire/firedtv-fe.c
drivers/media/dvb/frontends/dib0070.h
drivers/media/dvb/frontends/dib7000p.c
drivers/media/dvb/pt1/pt1.c
drivers/media/dvb/siano/Kconfig
drivers/media/dvb/siano/smsusb.c
drivers/media/radio/radio-gemtek-pci.c
drivers/media/video/bt8xx/bttv-driver.c
drivers/media/video/davinci/vpif_display.c
drivers/media/video/em28xx/em28xx-audio.c
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/gspca/m5602/m5602_s5k4aa.c
drivers/media/video/gspca/mr97310a.c
drivers/media/video/gspca/ov519.c
drivers/media/video/gspca/stv06xx/stv06xx.c
drivers/media/video/mx1_camera.c
drivers/media/video/mx3_camera.c
drivers/media/video/pxa_camera.c
drivers/media/video/s2255drv.c
drivers/media/video/saa7134/saa7134-cards.c
drivers/media/video/saa7134/saa7134-ts.c
drivers/media/video/saa7134/saa7134.h
drivers/media/video/saa7164/saa7164-cmd.c
drivers/media/video/sh_mobile_ceu_camera.c
drivers/media/video/soc_camera.c
drivers/media/video/uvc/uvc_ctrl.c
drivers/media/video/uvc/uvc_video.c
drivers/media/video/videobuf-dma-contig.c
drivers/mfd/wm831x-core.c
drivers/misc/eeprom/at24.c
drivers/misc/sgi-gru/gruprocfs.c
drivers/mmc/host/omap.c
drivers/mmc/host/pxamci.c
drivers/mtd/maps/Kconfig
drivers/mtd/maps/Makefile
drivers/mtd/maps/gpio-addr-flash.c
drivers/mtd/maps/sa1100-flash.c
drivers/mtd/nand/nand_base.c
drivers/net/Kconfig
drivers/net/arm/ep93xx_eth.c
drivers/net/au1000_eth.c
drivers/net/b44.c
drivers/net/benet/be.h
drivers/net/benet/be_cmds.h
drivers/net/benet/be_ethtool.c
drivers/net/benet/be_main.c
drivers/net/can/Kconfig
drivers/net/can/dev.c
drivers/net/can/sja1000/Kconfig [new file with mode: 0644]
drivers/net/can/usb/Kconfig [new file with mode: 0644]
drivers/net/can/usb/Makefile
drivers/net/can/usb/ems_usb.c
drivers/net/cassini.c
drivers/net/cxgb3/sge.c
drivers/net/davinci_emac.c
drivers/net/e100.c
drivers/net/e1000e/defines.h
drivers/net/e1000e/e1000.h
drivers/net/e1000e/ethtool.c
drivers/net/e1000e/hw.h
drivers/net/e1000e/ich8lan.c
drivers/net/e1000e/netdev.c
drivers/net/e1000e/phy.c
drivers/net/forcedeth.c
drivers/net/fsl_pq_mdio.c
drivers/net/ibm_newemac/emac.h
drivers/net/ixgbe/ixgbe_main.c
drivers/net/ks8851_mll.c
drivers/net/macsonic.c
drivers/net/macvlan.c
drivers/net/netxen/netxen_nic.h
drivers/net/netxen/netxen_nic_hdr.h
drivers/net/netxen/netxen_nic_hw.c
drivers/net/netxen/netxen_nic_init.c
drivers/net/netxen/netxen_nic_main.c
drivers/net/pcmcia/pcnet_cs.c
drivers/net/phy/mdio-gpio.c
drivers/net/ppp_generic.c
drivers/net/qlge/qlge_main.c
drivers/net/qlge/qlge_mpi.c
drivers/net/r6040.c
drivers/net/r8169.c
drivers/net/s2io.c
drivers/net/sfc/sfe4001.c
drivers/net/sky2.c
drivers/net/smc91x.c
drivers/net/smsc911x.c
drivers/net/smsc9420.c
drivers/net/stmmac/stmmac_main.c
drivers/net/stmmac/stmmac_timer.c
drivers/net/stmmac/stmmac_timer.h
drivers/net/sungem.c
drivers/net/tokenring/ibmtr.c
drivers/net/usb/Kconfig
drivers/net/usb/cdc_ether.c
drivers/net/usb/hso.c
drivers/net/veth.c
drivers/net/virtio_net.c
drivers/net/wan/cosa.c
drivers/net/wireless/ath/ath5k/base.c
drivers/net/wireless/ath/ath5k/led.c
drivers/net/wireless/ath/ath9k/main.c
drivers/net/wireless/ath/ath9k/rc.c
drivers/net/wireless/b43/dma.c
drivers/net/wireless/b43/main.c
drivers/net/wireless/ipw2x00/ipw2100.c
drivers/net/wireless/ipw2x00/ipw2200.c
drivers/net/wireless/ipw2x00/libipw.h
drivers/net/wireless/ipw2x00/libipw_module.c
drivers/net/wireless/iwlwifi/iwl-1000.c
drivers/net/wireless/iwlwifi/iwl-6000.c
drivers/net/wireless/iwlwifi/iwl-agn-rs.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-core.h
drivers/net/wireless/iwlwifi/iwl-tx.c
drivers/net/wireless/libertas/ethtool.c
drivers/net/wireless/libertas/if_usb.c
drivers/net/wireless/p54/p54usb.c
drivers/net/wireless/rt2x00/rt2x00dev.c
drivers/net/wireless/rt2x00/rt2x00link.c
drivers/net/wireless/rt2x00/rt2x00usb.c
drivers/net/wireless/rt2x00/rt73usb.c
drivers/net/wireless/rtl818x/rtl8187_leds.c
drivers/net/wireless/rtl818x/rtl8187_rfkill.c
drivers/pci/dmar.c
drivers/pci/intel-iommu.c
drivers/pci/pcie/aspm.c
drivers/pcmcia/cs.c
drivers/pcmcia/yenta_socket.c
drivers/platform/x86/acerhdf.c
drivers/platform/x86/eeepc-laptop.c
drivers/platform/x86/thinkpad_acpi.c
drivers/pps/kapi.c
drivers/pps/pps.c
drivers/regulator/core.c
drivers/regulator/fixed.c
drivers/regulator/wm831x-isink.c
drivers/regulator/wm831x-ldo.c
drivers/rtc/rtc-coh901331.c
drivers/rtc/rtc-pcf50633.c
drivers/rtc/rtc-v3020.c
drivers/rtc/rtc-vr41xx.c
drivers/rtc/rtc-x1205.c
drivers/s390/char/monreader.c
drivers/s390/char/sclp_quiesce.c
drivers/scsi/bfa/bfad_fwimg.c
drivers/scsi/bfa/bfad_im.c
drivers/scsi/gdth.c
drivers/scsi/hosts.c
drivers/scsi/ipr.c
drivers/scsi/ipr.h
drivers/scsi/libsas/sas_expander.c
drivers/scsi/pmcraid.c
drivers/scsi/scsi_scan.c
drivers/scsi/scsi_sysfs.c
drivers/scsi/scsi_transport_fc.c
drivers/scsi/sd_dif.c
drivers/serial/8250.c
drivers/serial/8250_pci.c
drivers/serial/bcm63xx_uart.c
drivers/serial/of_serial.c
drivers/serial/serial_cs.c
drivers/serial/sh-sci.c
drivers/serial/suncore.c
drivers/serial/suncore.h
drivers/serial/sunhv.c
drivers/serial/sunsab.c
drivers/serial/sunsu.c
drivers/serial/sunzilog.c
drivers/spi/spi_stmp.c
drivers/spi/spi_txx9.c
drivers/ssb/scan.c
drivers/staging/go7007/s2250-board.c
drivers/staging/go7007/s2250-loader.h [new file with mode: 0644]
drivers/staging/hv/BlkVsc.c
drivers/staging/hv/Channel.c
drivers/staging/hv/ChannelMgmt.c
drivers/staging/hv/NetVsc.c
drivers/staging/hv/NetVsc.h
drivers/staging/hv/StorVsc.c
drivers/staging/hv/blkvsc_drv.c
drivers/staging/hv/netvsc_drv.c
drivers/staging/octeon/ethernet-mdio.c
drivers/staging/octeon/ethernet-spi.c
drivers/staging/octeon/ethernet.c
drivers/staging/rtl8187se/TODO
drivers/staging/rtl8192su/TODO
drivers/staging/vt6655/TODO
drivers/staging/vt6656/TODO
drivers/thermal/thermal_sys.c
drivers/uio/uio_pdrv_genirq.c
drivers/usb/class/cdc-acm.c
drivers/usb/core/hub.c
drivers/usb/gadget/amd5536udc.c
drivers/usb/host/ehci-hcd.c
drivers/usb/host/ehci-pci.c
drivers/usb/host/ehci-q.c
drivers/usb/host/ehci-sched.c
drivers/usb/host/ehci.h
drivers/usb/host/ohci-hcd.c
drivers/usb/host/ohci-pci.c
drivers/usb/host/ohci-q.c
drivers/usb/host/ohci.h
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci-ring.c
drivers/usb/mon/mon_bin.c
drivers/usb/musb/cppi_dma.c
drivers/usb/musb/musb_core.c
drivers/usb/musb/musb_gadget.c
drivers/usb/musb/musb_gadget_ep0.c
drivers/usb/musb/musb_host.c
drivers/usb/serial/cp210x.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/option.c
drivers/video/Kconfig
drivers/video/atafb.c
drivers/video/atmel_lcdfb.c
drivers/video/backlight/corgi_lcd.c
drivers/video/backlight/lcd.c
drivers/video/console/fbcon.c
drivers/video/da8xx-fb.c
drivers/video/gbefb.c
drivers/video/msm/mddi.c
drivers/video/msm/mddi_client_nt35399.c
drivers/video/msm/mddi_client_toshiba.c
drivers/video/msm/mdp.c
drivers/video/msm/mdp_ppp.c
drivers/video/savage/savagefb_driver.c
drivers/video/uvesafb.c
drivers/watchdog/pnx4008_wdt.c
drivers/watchdog/rc32434_wdt.c
drivers/watchdog/sbc_fitpc2_wdt.c
firmware/Makefile
firmware/WHENCE
firmware/cis/PE-200.cis.ihex [new file with mode: 0644]
firmware/cis/SW_555_SER.cis.ihex [new file with mode: 0644]
firmware/cis/SW_7xx_SER.cis.ihex [new file with mode: 0644]
firmware/cis/SW_8xx_SER.cis.ihex [new file with mode: 0644]
fs/9p/cache.c
fs/9p/vfs_dir.c
fs/9p/vfs_inode.c
fs/Kconfig
fs/afs/file.c
fs/btrfs/extent-tree.c
fs/btrfs/extent_map.c
fs/btrfs/free-space-cache.c
fs/btrfs/inode.c
fs/btrfs/root-tree.c
fs/btrfs/transaction.c
fs/cachefiles/interface.c
fs/cachefiles/namei.c
fs/cachefiles/rdwr.c
fs/cifs/CHANGES
fs/cifs/cifsfs.c
fs/cifs/cifsproto.h
fs/cifs/connect.c
fs/cifs/dir.c
fs/cifs/inode.c
fs/cifs/misc.c
fs/cifs/readdir.c
fs/compat.c
fs/compat_ioctl.c
fs/exec.c
fs/ext3/fsync.c
fs/ext3/inode.c
fs/ext3/super.c
fs/ext4/ext4.h
fs/ext4/extents.c
fs/ext4/inode.c
fs/ext4/namei.c
fs/ext4/super.c
fs/fcntl.c
fs/fscache/Kconfig
fs/fscache/Makefile
fs/fscache/cache.c
fs/fscache/cookie.c
fs/fscache/internal.h
fs/fscache/main.c
fs/fscache/object-list.c [new file with mode: 0644]
fs/fscache/object.c
fs/fscache/operation.c
fs/fscache/page.c
fs/fscache/proc.c
fs/fscache/stats.c
fs/fuse/dir.c
fs/fuse/file.c
fs/gfs2/main.c
fs/gfs2/recovery.c
fs/ioctl.c
fs/jbd/journal.c
fs/jbd2/journal.c
fs/jffs2/read.c
fs/nfs/fscache.c
fs/nfs/nfs4proc.c
fs/nfsd/nfs3xdr.c
fs/nilfs2/btnode.c
fs/nilfs2/cpfile.c
fs/nilfs2/inode.c
fs/nilfs2/ioctl.c
fs/nilfs2/segment.c
fs/ocfs2/file.c
fs/ocfs2/ocfs2.h
fs/ocfs2/refcounttree.c
fs/ocfs2/super.c
fs/ocfs2/uptodate.c
fs/proc/array.c
fs/proc/base.c
fs/sysfs/dir.c
fs/xfs/xfs_log_recover.c
fs/xfs/xfs_trans_ail.c
include/asm-generic/fcntl.h
include/linux/ext3_fs_i.h
include/linux/fb.h
include/linux/fscache-cache.h
include/linux/fscache.h
include/linux/i2c-pnx.h
include/linux/i2c.h
include/linux/input.h
include/linux/isdn_ppp.h
include/linux/mfd/wm831x/regulator.h
include/linux/nilfs2_fs.h
include/linux/pci_ids.h
include/linux/perf_event.h
include/linux/skbuff.h
include/linux/slow-work.h
include/linux/suspend.h
include/linux/trace_seq.h
include/linux/vt.h
include/net/9p/client.h
include/net/ip_fib.h
include/net/mac80211.h
include/net/netfilter/nf_conntrack.h
include/net/netfilter/nf_nat_helper.h
include/net/sctp/structs.h
include/pcmcia/ss.h
include/scsi/scsi_device.h
include/scsi/scsi_host.h
init/Kconfig
init/main.c
kernel/Makefile
kernel/fork.c
kernel/futex.c
kernel/irq/spurious.c
kernel/kthread.c
kernel/module.c
kernel/perf_event.c
kernel/power/hibernate.c
kernel/power/swap.c
kernel/rcutree.c
kernel/rcutree.h
kernel/sched.c
kernel/sched_fair.c
kernel/slow-work-debugfs.c [new file with mode: 0644]
kernel/slow-work.c
kernel/slow-work.h [new file with mode: 0644]
kernel/trace/ftrace.c
kernel/trace/ring_buffer.c
kernel/trace/trace.c
kernel/trace/trace_output.c
kernel/user.c
kernel/workqueue.c
lib/dma-debug.c
lib/radix-tree.c
lib/string.c
mm/Kconfig
mm/backing-dev.c
mm/highmem.c
mm/ksm.c
mm/memory_hotplug.c
mm/migrate.c
mm/page_alloc.c
mm/percpu.c
mm/swapfile.c
net/8021q/vlan.c
net/9p/client.c
net/bluetooth/hci_conn.c
net/bluetooth/l2cap.c
net/bridge/br_if.c
net/can/bcm.c
net/core/datagram.c
net/core/dev.c
net/core/pktgen.c
net/core/skbuff.c
net/decnet/sysctl_net_decnet.c
net/ipv4/fib_frontend.c
net/ipv4/ip_fragment.c
net/ipv4/ip_gre.c
net/ipv4/ipip.c
net/ipv4/ipmr.c
net/ipv4/netfilter/nf_nat_core.c
net/ipv4/netfilter/nf_nat_helper.c
net/ipv4/route.c
net/ipv4/tcp.c
net/ipv4/udp.c
net/ipv6/udp.c
net/mac80211/agg-rx.c
net/mac80211/agg-tx.c
net/mac80211/cfg.c
net/mac80211/ht.c
net/mac80211/ibss.c
net/mac80211/ieee80211_i.h
net/mac80211/util.c
net/netfilter/nf_conntrack_core.c
net/netfilter/nf_conntrack_proto_tcp.c
net/netfilter/nf_log.c
net/netfilter/xt_connlimit.c
net/netfilter/xt_limit.c
net/netfilter/xt_osf.c
net/rfkill/core.c
net/rose/rose_route.c
net/sctp/associola.c
net/sctp/outqueue.c
net/sctp/sm_sideeffect.c
net/sctp/sm_statefuns.c
net/sctp/socket.c
net/sctp/transport.c
net/sunrpc/addr.c
net/sunrpc/svcsock.c
net/wireless/sme.c
scripts/dtc/data.c
scripts/dtc/dtc-lexer.l
scripts/dtc/dtc-lexer.lex.c_shipped
scripts/dtc/libfdt/fdt_ro.c
scripts/dtc/treesource.c
scripts/genksyms/keywords.c_shipped
scripts/genksyms/keywords.gperf
scripts/get_maintainer.pl
scripts/kconfig/Makefile
scripts/kconfig/lex.zconf.c_shipped
scripts/kconfig/streamline_config.pl
scripts/kconfig/zconf.gperf
scripts/kconfig/zconf.hash.c_shipped
scripts/kconfig/zconf.l
scripts/kconfig/zconf.tab.c_shipped
scripts/kconfig/zconf.y
security/integrity/ima/ima_iint.c
sound/arm/aaci.c
sound/core/pcm.c
sound/core/rawmidi.c
sound/drivers/dummy.c
sound/drivers/pcsp/pcsp_lib.c
sound/drivers/pcsp/pcsp_mixer.c
sound/oss/dmasound/dmasound_core.c
sound/oss/hex2hex.c
sound/oss/sb_common.c
sound/oss/sb_ess.c
sound/parisc/harmony.c
sound/pci/Kconfig
sound/pci/ali5451/ali5451.c
sound/pci/hda/hda_intel.c
sound/pci/hda/patch_conexant.c
sound/pci/hda/patch_nvhdmi.c
sound/pci/hda/patch_realtek.c
sound/pci/hda/patch_sigmatel.c
sound/pci/ice1712/ice1712.h
sound/pci/ice1712/prodigy_hifi.c
sound/pci/intel8x0.c
sound/pci/via82xx.c
sound/pcmcia/pdaudiocf/pdaudiocf.c
sound/pcmcia/vx/vxpocket.c
sound/sh/aica.c
sound/soc/codecs/tlv320aic23.c
sound/soc/omap/Kconfig
sound/soc/omap/omap-pcm.c
sound/soc/omap/omap3evm.c
sound/soc/omap/omap3pandora.c
sound/soc/s3c24xx/s3c24xx-pcm.c
sound/soc/s3c24xx/s3c64xx-i2s.c
sound/soc/soc-core.c
sound/soc/soc-dapm.c
sound/usb/caiaq/audio.c
sound/usb/caiaq/device.c
sound/usb/usbaudio.h
sound/usb/usbmixer.c
tools/perf/Makefile
tools/perf/builtin-record.c
tools/perf/builtin-top.c
tools/perf/util/symbol.c
tools/perf/util/symbol.h

index b93fb7e..946c7ec 100644 (file)
@@ -25,6 +25,7 @@
 *.elf
 *.bin
 *.gz
+*.bz2
 *.lzma
 *.patch
 *.gcno
index b3e3a03..fe79e3c 100644 (file)
@@ -312,10 +312,8 @@ and to the following documentation:
 8. Mailing list
 ---------------
 
-There are several frame buffer device related mailing lists at SourceForge:
-  - linux-fbdev-announce@lists.sourceforge.net, for announcements,
-  - linux-fbdev-user@lists.sourceforge.net, for generic user support,
-  - linux-fbdev-devel@lists.sourceforge.net, for project developers.
+There is a frame buffer device related mailing list at kernel.org:
+linux-fbdev@vger.kernel.org.
 
 Point your web browser to http://sourceforge.net/projects/linux-fbdev/ for
 subscription information and archive browsing.
index 9e94b94..a91e2e2 100644 (file)
@@ -235,6 +235,7 @@ proc files.
                neg=N   Number of negative lookups made
                pos=N   Number of positive lookups made
                crt=N   Number of objects created by lookup
+               tmo=N   Number of lookups timed out and requeued
        Updates n=N     Number of update cookie requests seen
                nul=N   Number of upd reqs given a NULL parent
                run=N   Number of upd reqs granted CPU time
@@ -250,8 +251,10 @@ proc files.
                ok=N    Number of successful alloc reqs
                wt=N    Number of alloc reqs that waited on lookup completion
                nbf=N   Number of alloc reqs rejected -ENOBUFS
+               int=N   Number of alloc reqs aborted -ERESTARTSYS
                ops=N   Number of alloc reqs submitted
                owt=N   Number of alloc reqs waited for CPU time
+               abt=N   Number of alloc reqs aborted due to object death
        Retrvls n=N     Number of retrieval (read) requests seen
                ok=N    Number of successful retr reqs
                wt=N    Number of retr reqs that waited on lookup completion
@@ -261,6 +264,7 @@ proc files.
                oom=N   Number of retr reqs failed -ENOMEM
                ops=N   Number of retr reqs submitted
                owt=N   Number of retr reqs waited for CPU time
+               abt=N   Number of retr reqs aborted due to object death
        Stores  n=N     Number of storage (write) requests seen
                ok=N    Number of successful store reqs
                agn=N   Number of store reqs on a page already pending storage
@@ -268,12 +272,37 @@ proc files.
                oom=N   Number of store reqs failed -ENOMEM
                ops=N   Number of store reqs submitted
                run=N   Number of store reqs granted CPU time
+               pgs=N   Number of pages given store req processing time
+               rxd=N   Number of store reqs deleted from tracking tree
+               olm=N   Number of store reqs over store limit
+       VmScan  nos=N   Number of release reqs against pages with no pending store
+               gon=N   Number of release reqs against pages stored by time lock granted
+               bsy=N   Number of release reqs ignored due to in-progress store
+               can=N   Number of page stores cancelled due to release req
        Ops     pend=N  Number of times async ops added to pending queues
                run=N   Number of times async ops given CPU time
                enq=N   Number of times async ops queued for processing
+               can=N   Number of async ops cancelled
+               rej=N   Number of async ops rejected due to object lookup/create failure
                dfr=N   Number of async ops queued for deferred release
                rel=N   Number of async ops released
                gc=N    Number of deferred-release async ops garbage collected
+       CacheOp alo=N   Number of in-progress alloc_object() cache ops
+               luo=N   Number of in-progress lookup_object() cache ops
+               luc=N   Number of in-progress lookup_complete() cache ops
+               gro=N   Number of in-progress grab_object() cache ops
+               upo=N   Number of in-progress update_object() cache ops
+               dro=N   Number of in-progress drop_object() cache ops
+               pto=N   Number of in-progress put_object() cache ops
+               syn=N   Number of in-progress sync_cache() cache ops
+               atc=N   Number of in-progress attr_changed() cache ops
+               rap=N   Number of in-progress read_or_alloc_page() cache ops
+               ras=N   Number of in-progress read_or_alloc_pages() cache ops
+               alp=N   Number of in-progress allocate_page() cache ops
+               als=N   Number of in-progress allocate_pages() cache ops
+               wrp=N   Number of in-progress write_page() cache ops
+               ucp=N   Number of in-progress uncache_page() cache ops
+               dsp=N   Number of in-progress dissociate_pages() cache ops
 
 
  (*) /proc/fs/fscache/histogram
@@ -299,6 +328,87 @@ proc files.
      jiffy range covered, and the SECS field the equivalent number of seconds.
 
 
+===========
+OBJECT LIST
+===========
+
+If CONFIG_FSCACHE_OBJECT_LIST is enabled, the FS-Cache facility will maintain a
+list of all the objects currently allocated and allow them to be viewed
+through:
+
+       /proc/fs/fscache/objects
+
+This will look something like:
+
+       [root@andromeda ~]# head /proc/fs/fscache/objects
+       OBJECT   PARENT   STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA       OBJECT_KEY, AUX_DATA
+       ======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================
+          17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
+          1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
+
+where the first set of columns before the '|' describe the object:
+
+       COLUMN  DESCRIPTION
+       ======= ===============================================================
+       OBJECT  Object debugging ID (appears as OBJ%x in some debug messages)
+       PARENT  Debugging ID of parent object
+       STAT    Object state
+       CHLDN   Number of child objects of this object
+       OPS     Number of outstanding operations on this object
+       OOP     Number of outstanding child object management operations
+       IPR
+       EX      Number of outstanding exclusive operations
+       READS   Number of outstanding read operations
+       EM      Object's event mask
+       EV      Events raised on this object
+       F       Object flags
+       S       Object slow-work work item flags
+
+and the second set of columns describe the object's cookie, if present:
+
+       COLUMN          DESCRIPTION
+       =============== =======================================================
+       NETFS_COOKIE_DEF Name of netfs cookie definition
+       TY              Cookie type (IX - index, DT - data, hex - special)
+       FL              Cookie flags
+       NETFS_DATA      Netfs private data stored in the cookie
+       OBJECT_KEY      Object key      } 1 column, with separating comma
+       AUX_DATA        Object aux data } presence may be configured
+
+The data shown may be filtered by attaching the a key to an appropriate keyring
+before viewing the file.  Something like:
+
+               keyctl add user fscache:objlist <restrictions> @s
+
+where <restrictions> are a selection of the following letters:
+
+       K       Show hexdump of object key (don't show if not given)
+       A       Show hexdump of object aux data (don't show if not given)
+
+and the following paired letters:
+
+       C       Show objects that have a cookie
+       c       Show objects that don't have a cookie
+       B       Show objects that are busy
+       b       Show objects that aren't busy
+       W       Show objects that have pending writes
+       w       Show objects that don't have pending writes
+       R       Show objects that have outstanding reads
+       r       Show objects that don't have outstanding reads
+       S       Show objects that have slow work queued
+       s       Show objects that don't have slow work queued
+
+If neither side of a letter pair is given, then both are implied.  For example:
+
+       keyctl add user fscache:objlist KB @s
+
+shows objects that are busy, and lists their object keys, but does not dump
+their auxiliary data.  It also implies "CcWwRrSs", but as 'B' is given, 'b' is
+not implied.
+
+By default all objects and all fields will be shown.
+
+
 =========
 DEBUGGING
 =========
index 2666b1e..1902c57 100644 (file)
@@ -641,7 +641,7 @@ data file must be retired (see the relinquish cookie function below).
 
 Furthermore, note that this does not cancel the asynchronous read or write
 operation started by the read/alloc and write functions, so the page
-invalidation and release functions must use:
+invalidation functions must use:
 
        bool fscache_check_page_write(struct fscache_cookie *cookie,
                                      struct page *page);
@@ -654,6 +654,25 @@ to see if a page is being written to the cache, and:
 to wait for it to finish if it is.
 
 
+When releasepage() is being implemented, a special FS-Cache function exists to
+manage the heuristics of coping with vmscan trying to eject pages, which may
+conflict with the cache trying to write pages to the cache (which may itself
+need to allocate memory):
+
+       bool fscache_maybe_release_page(struct fscache_cookie *cookie,
+                                       struct page *page,
+                                       gfp_t gfp);
+
+This takes the netfs cookie, and the page and gfp arguments as supplied to
+releasepage().  It will return false if the page cannot be released yet for
+some reason and if it returns true, the page has been uncached and can now be
+released.
+
+To make a page available for release, this function may wait for an outstanding
+storage request to complete, or it may attempt to cancel the storage request -
+in which case the page will not be stored in the cache this time.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================
index bf4f4b7..6d94e06 100644 (file)
@@ -134,9 +134,15 @@ ro                         Mount filesystem read only. Note that ext4 will
                        mount options "ro,noload" can be used to prevent
                        writes to the filesystem.
 
+journal_checksum       Enable checksumming of the journal transactions.
+                       This will allow the recovery code in e2fsck and the
+                       kernel to detect corruption in the kernel.  It is a
+                       compatible change and will be ignored by older kernels.
+
 journal_async_commit   Commit block can be written to disk without waiting
                        for descriptor blocks. If enabled older kernels cannot
-                       mount the device.
+                       mount the device. This will enable 'journal_checksum'
+                       internally.
 
 journal=update         Update the ext4 file system's journal to the current
                        format.
index c2a0871..c58b9f5 100644 (file)
@@ -20,15 +20,16 @@ Lots of code taken from ext3 and other projects.
 Authors in alphabetical order:
 Joel Becker   <joel.becker@oracle.com>
 Zach Brown    <zach.brown@oracle.com>
-Mark Fasheh   <mark.fasheh@oracle.com>
+Mark Fasheh   <mfasheh@suse.com>
 Kurt Hackel   <kurt.hackel@oracle.com>
+Tao Ma        <tao.ma@oracle.com>
 Sunil Mushran <sunil.mushran@oracle.com>
 Manish Singh  <manish.singh@oracle.com>
+Tiger Yang    <tiger.yang@oracle.com>
 
 Caveats
 =======
 Features which OCFS2 does not support yet:
-       - quotas
        - Directory change notification (F_NOTIFY)
        - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 
@@ -70,7 +71,6 @@ commit=nrsec  (*)     Ocfs2 can be told to sync all its data and metadata
                        performance.
 localalloc=8(*)                Allows custom localalloc size in MB. If the value is too
                        large, the fs will silently revert it to the default.
-                       Localalloc is not enabled for local mounts.
 localflocks            This disables cluster aware flock.
 inode64                        Indicates that Ocfs2 is allowed to create inodes at
                        any location in the filesystem, including those which
index c5b37c5..ac540c7 100644 (file)
@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD SB900
+  * AMD Hudson-2
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
index ebc50f8..9dbf447 100644 (file)
@@ -41,6 +41,13 @@ expand files, provided the time taken to do so isn't too long.
 Operations of both types may sleep during execution, thus tying up the thread
 loaned to it.
 
+A further class of work item is available, based on the slow work item class:
+
+ (*) Delayed slow work items.
+
+These are slow work items that have a timer to defer queueing of the item for
+a while.
+
 
 THREAD-TO-CLASS ALLOCATION
 --------------------------
@@ -64,9 +71,11 @@ USING SLOW WORK ITEMS
 Firstly, a module or subsystem wanting to make use of slow work items must
 register its interest:
 
-        int ret = slow_work_register_user();
+        int ret = slow_work_register_user(struct module *module);
 
-This will return 0 if successful, or a -ve error upon failure.
+This will return 0 if successful, or a -ve error upon failure.  The module
+pointer should be the module interested in using this facility (almost
+certainly THIS_MODULE).
 
 
 Slow work items may then be set up by:
@@ -93,6 +102,10 @@ Slow work items may then be set up by:
 
      or:
 
+       delayed_slow_work_init(&myitem, &myitem_ops);
+
+     or:
+
        vslow_work_init(&myitem, &myitem_ops);
 
      depending on its class.
@@ -102,15 +115,92 @@ A suitably set up work item can then be enqueued for processing:
        int ret = slow_work_enqueue(&myitem);
 
 This will return a -ve error if the thread pool is unable to gain a reference
-on the item, 0 otherwise.
+on the item, 0 otherwise, or (for delayed work):
+
+       int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay);
 
 
 The items are reference counted, so there ought to be no need for a flush
-operation.  When all a module's slow work items have been processed, and the
+operation.  But as the reference counting is optional, means to cancel
+existing work items are also included:
+
+       cancel_slow_work(&myitem);
+       cancel_delayed_slow_work(&myitem);
+
+can be used to cancel pending work.  The above cancel function waits for
+existing work to have been executed (or prevent execution of them, depending
+on timing).
+
+
+When all a module's slow work items have been processed, and the
 module has no further interest in the facility, it should unregister its
 interest:
 
-       slow_work_unregister_user();
+       slow_work_unregister_user(struct module *module);
+
+The module pointer is used to wait for all outstanding work items for that
+module before completing the unregistration.  This prevents the put_ref() code
+from being taken away before it completes.  module should almost certainly be
+THIS_MODULE.
+
+
+================
+HELPER FUNCTIONS
+================
+
+The slow-work facility provides a function by which it can be determined
+whether or not an item is queued for later execution:
+
+       bool queued = slow_work_is_queued(struct slow_work *work);
+
+If it returns false, then the item is not on the queue (it may be executing
+with a requeue pending).  This can be used to work out whether an item on which
+another depends is on the queue, thus allowing a dependent item to be queued
+after it.
+
+If the above shows an item on which another depends not to be queued, then the
+owner of the dependent item might need to wait.  However, to avoid locking up
+the threads unnecessarily be sleeping in them, it can make sense under some
+circumstances to return the work item to the queue, thus deferring it until
+some other items have had a chance to make use of the yielded thread.
+
+To yield a thread and defer an item, the work function should simply enqueue
+the work item again and return.  However, this doesn't work if there's nothing
+actually on the queue, as the thread just vacated will jump straight back into
+the item's work function, thus busy waiting on a CPU.
+
+Instead, the item should use the thread to wait for the dependency to go away,
+but rather than using schedule() or schedule_timeout() to sleep, it should use
+the following function:
+
+       bool requeue = slow_work_sleep_till_thread_needed(
+                       struct slow_work *work,
+                       signed long *_timeout);
+
+This will add a second wait and then sleep, such that it will be woken up if
+either something appears on the queue that could usefully make use of the
+thread - and behind which this item can be queued, or if the event the caller
+set up to wait for happens.  True will be returned if something else appeared
+on the queue and this work function should perhaps return, of false if
+something else woke it up.  The timeout is as for schedule_timeout().
+
+For example:
+
+       wq = bit_waitqueue(&my_flags, MY_BIT);
+       init_wait(&wait);
+       requeue = false;
+       do {
+               prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+               if (!test_bit(MY_BIT, &my_flags))
+                       break;
+               requeue = slow_work_sleep_till_thread_needed(&my_work,
+                                                            &timeout);
+       } while (timeout > 0 && !requeue);
+       finish_wait(wq, &wait);
+       if (!test_bit(MY_BIT, &my_flags)
+               goto do_my_thing;
+       if (requeue)
+               return; // to slow_work
 
 
 ===============
@@ -118,7 +208,8 @@ ITEM OPERATIONS
 ===============
 
 Each work item requires a table of operations of type struct slow_work_ops.
-All members are required:
+Only ->execute() is required; the getting and putting of a reference and the
+describing of an item are all optional.
 
  (*) Get a reference on an item:
 
@@ -148,6 +239,16 @@ All members are required:
      This should perform the work required of the item.  It may sleep, it may
      perform disk I/O and it may wait for locks.
 
+ (*) View an item through /proc:
+
+       void (*desc)(struct slow_work *work, struct seq_file *m);
+
+     If supplied, this should print to 'm' a small string describing the work
+     the item is to do.  This should be no more than about 40 characters, and
+     shouldn't include a newline character.
+
+     See the 'Viewing executing and queued items' section below.
+
 
 ==================
 POOL CONFIGURATION
@@ -172,3 +273,50 @@ The slow-work thread pool has a number of configurables:
      is bounded to between 1 and one fewer than the number of active threads.
      This ensures there is always at least one thread that can process very
      slow work items, and always at least one thread that won't.
+
+
+==================================
+VIEWING EXECUTING AND QUEUED ITEMS
+==================================
+
+If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
+
+       /sys/kernel/debug/slow_work/runqueue
+
+through which the list of work items being executed and the queues of items to
+be executed may be viewed.  The owner of a work item is given the chance to
+add some information of its own.
+
+The contents look something like the following:
+
+    THR PID   ITEM ADDR        FL MARK  DESC
+    === ===== ================ == ===== ==========
+      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
+      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
+      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
+      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
+      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
+      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
+      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
+      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
+    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
+    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
+    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
+    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
+    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
+    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
+    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
+    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
+    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
+    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
+    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
+    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
+    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
+    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK
+
+In the 'THR' column, executing items show the thread they're occupying and
+queued threads indicate which queue they're on.  'PID' shows the process ID of
+a slow-work thread that's executing something.  'FL' shows the work item flags.
+'MARK' indicates how long since an item was queued or began executing.  Lastly,
+the 'DESC' column permits the owner of an item to give some information.
+
index 1c8eb45..fd9a2f6 100644 (file)
@@ -522,7 +522,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     pcm_devs       - Number of PCM devices assigned to each card
                      (default = 1, up to 4)
     pcm_substreams - Number of PCM substreams assigned to each PCM
-                     (default = 8, up to 16)
+                     (default = 8, up to 128)
     hrtimer        - Use hrtimer (=1, default) or system timer (=0)
     fake_buffer    - Fake buffer allocations (default = 1)
 
index 70d68ce..a87dc27 100644 (file)
@@ -1,5 +1,5 @@
 Generic Thermal Sysfs driver How To
-=========================
+===================================
 
 Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
 
@@ -10,20 +10,20 @@ Copyright (c)  2008 Intel Corporation
 
 0. Introduction
 
-The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
-and thermal cooling devices (fan, processor...) to register with the thermal management
-solution and to be a part of it.
+The generic thermal sysfs provides a set of interfaces for thermal zone
+devices (sensors) and thermal cooling devices (fan, processor...) to register
+with the thermal management solution and to be a part of it.
 
-This how-to focuses on enabling new thermal zone and cooling devices to participate
-in thermal management.
-This solution is platform independent and any type of thermal zone devices and
-cooling devices should be able to make use of the infrastructure.
+This how-to focuses on enabling new thermal zone and cooling devices to
+participate in thermal management.
+This solution is platform independent and any type of thermal zone devices
+and cooling devices should be able to make use of the infrastructure.
 
-The main task of the thermal sysfs driver is to expose thermal zone attributes as well
-as cooling device attributes to the user space.
-An intelligent thermal management application can make decisions based on inputs
-from thermal zone attributes (the current temperature and trip point temperature)
-and throttle appropriate devices.
+The main task of the thermal sysfs driver is to expose thermal zone attributes
+as well as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on
+inputs from thermal zone attributes (the current temperature and trip point
+temperature) and throttle appropriate devices.
 
 [0-*]  denotes any positive number starting from 0
 [1-*]  denotes any positive number starting from 1
@@ -31,77 +31,77 @@ and throttle appropriate devices.
 1. thermal sysfs driver interface functions
 
 1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
-                               void *devdata, struct thermal_zone_device_ops *ops)
-
-       This interface function adds a new thermal zone device (sensor) to
-       /sys/class/thermal folder as thermal_zone[0-*].
-       It tries to bind all the thermal cooling devices registered at the same time.
-
-       name: the thermal zone name.
-       trips: the total number of trip points this thermal zone supports.
-       devdata: device private data
-       ops: thermal zone device call-backs.
-               .bind: bind the thermal zone device with a thermal cooling device.
-               .unbind: unbind the thermal zone device with a thermal cooling device.
-               .get_temp: get the current temperature of the thermal zone.
-               .get_mode: get the current mode (user/kernel) of the thermal zone.
-                          "kernel" means thermal management is done in kernel.
-                          "user" will prevent kernel thermal driver actions upon trip points
-                          so that user applications can take charge of thermal management.
-               .set_mode: set the mode (user/kernel) of the thermal zone.
-               .get_trip_type: get the type of certain trip point.
-               .get_trip_temp: get the temperature above which the certain trip point
-                               will be fired.
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
+               int trips, void *devdata, struct thermal_zone_device_ops *ops)
+
+    This interface function adds a new thermal zone device (sensor) to
+    /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+    thermal cooling devices registered at the same time.
+
+    name: the thermal zone name.
+    trips: the total number of trip points this thermal zone supports.
+    devdata: device private data
+    ops: thermal zone device call-backs.
+       .bind: bind the thermal zone device with a thermal cooling device.
+       .unbind: unbind the thermal zone device with a thermal cooling device.
+       .get_temp: get the current temperature of the thermal zone.
+       .get_mode: get the current mode (user/kernel) of the thermal zone.
+           - "kernel" means thermal management is done in kernel.
+           - "user" will prevent kernel thermal driver actions upon trip points
+             so that user applications can take charge of thermal management.
+       .set_mode: set the mode (user/kernel) of the thermal zone.
+       .get_trip_type: get the type of certain trip point.
+       .get_trip_temp: get the temperature above which the certain trip point
+                       will be fired.
 
 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 
-       This interface function removes the thermal zone device.
-       It deletes the corresponding entry form /sys/class/thermal folder and unbind all
-       the thermal cooling devices it uses.
+    This interface function removes the thermal zone device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind all the thermal cooling devices it uses.
 
 1.2 thermal cooling device interface
 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
-                                       void *devdata, struct thermal_cooling_device_ops *)
-
-       This interface function adds a new thermal cooling device (fan/processor/...) to
-       /sys/class/thermal/ folder as cooling_device[0-*].
-       It tries to bind itself to all the thermal zone devices register at the same time.
-       name: the cooling device name.
-       devdata: device private data.
-       ops: thermal cooling devices call-backs.
-               .get_max_state: get the Maximum throttle state of the cooling device.
-               .get_cur_state: get the Current throttle state of the cooling device.
-               .set_cur_state: set the Current throttle state of the cooling device.
+               void *devdata, struct thermal_cooling_device_ops *)
+
+    This interface function adds a new thermal cooling device (fan/processor/...)
+    to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+    to all the thermal zone devices register at the same time.
+    name: the cooling device name.
+    devdata: device private data.
+    ops: thermal cooling devices call-backs.
+       .get_max_state: get the Maximum throttle state of the cooling device.
+       .get_cur_state: get the Current throttle state of the cooling device.
+       .set_cur_state: set the Current throttle state of the cooling device.
 
 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
-       This interface function remove the thermal cooling device.
-       It deletes the corresponding entry form /sys/class/thermal folder and unbind
-       itself from all the thermal zone devices using it.
+    This interface function remove the thermal cooling device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind itself from all the thermal zone devices using it.
 
 1.3 interface for binding a thermal zone device with a thermal cooling device
 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
-                       int trip, struct thermal_cooling_device *cdev);
+               int trip, struct thermal_cooling_device *cdev);
 
-       This interface function bind a thermal cooling device to the certain trip point
-       of a thermal zone device.
-       This function is usually called in the thermal zone device .bind callback.
-       tz: the thermal zone device
-       cdev: thermal cooling device
-       trip: indicates which trip point the cooling devices is associated with
-                in this thermal zone.
+    This interface function bind a thermal cooling device to the certain trip
+    point of a thermal zone device.
+    This function is usually called in the thermal zone device .bind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+         in this thermal zone.
 
 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
-                               int trip, struct thermal_cooling_device *cdev);
+               int trip, struct thermal_cooling_device *cdev);
 
-       This interface function unbind a thermal cooling device from the certain trip point
-       of a thermal zone device.
-       This function is usually called in the thermal zone device .unbind callback.
-       tz: the thermal zone device
-       cdev: thermal cooling device
-       trip: indicates which trip point the cooling devices is associated with
-               in this thermal zone.
+    This interface function unbind a thermal cooling device from the certain
+    trip point of a thermal zone device. This function is usually called in
+    the thermal zone device .unbind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+         in this thermal zone.
 
 2. sysfs attributes structure
 
@@ -114,153 +114,166 @@ if hwmon is compiled in or built as a module.
 
 Thermal zone device sys I/F, created once it's registered:
 /sys/class/thermal/thermal_zone[0-*]:
-       |-----type:                     Type of the thermal zone
-       |-----temp:                     Current temperature
-       |-----mode:                     Working mode of the thermal zone
-       |-----trip_point_[0-*]_temp:    Trip point temperature
-       |-----trip_point_[0-*]_type:    Trip point type
+    |---type:                  Type of the thermal zone
+    |---temp:                  Current temperature
+    |---mode:                  Working mode of the thermal zone
+    |---trip_point_[0-*]_temp: Trip point temperature
+    |---trip_point_[0-*]_type: Trip point type
 
 Thermal cooling device sys I/F, created once it's registered:
 /sys/class/thermal/cooling_device[0-*]:
-       |-----type :                    Type of the cooling device(processor/fan/...)
-       |-----max_state:                Maximum cooling state of the cooling device
-       |-----cur_state:                Current cooling state of the cooling device
+    |---type:                  Type of the cooling device(processor/fan/...)
+    |---max_state:             Maximum cooling state of the cooling device
+    |---cur_state:             Current cooling state of the cooling device
 
 
-These two dynamic attributes are created/removed in pairs.
-They represent the relationship between a thermal zone and its associated cooling device.
-They are created/removed for each
-thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
+Then next two dynamic attributes are created/removed in pairs. They represent
+the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each successful execution of
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
 
-/sys/class/thermal/thermal_zone[0-*]
-       |-----cdev[0-*]:                The [0-*]th cooling device in the current thermal zone
-       |-----cdev[0-*]_trip_point:     Trip point that cdev[0-*] is associated with
+/sys/class/thermal/thermal_zone[0-*]:
+    |---cdev[0-*]:             [0-*]th cooling device in current thermal zone
+    |---cdev[0-*]_trip_point:  Trip point that cdev[0-*] is associated with
 
 Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
-the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
-thermal zone device. E.g. the generic thermal driver registers one hwmon class device
-and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_
+of thermal zone device. E.g. the generic thermal driver registers one hwmon
+class device and build the associated hwmon sysfs I/F for all the registered
+ACPI thermal zones.
+
 /sys/class/hwmon/hwmon[0-*]:
-       |-----name:                     The type of the thermal zone devices.
-       |-----temp[1-*]_input:          The current temperature of thermal zone [1-*].
-       |-----temp[1-*]_critical:       The critical trip point of thermal zone [1-*].
+    |---name:                  The type of the thermal zone devices
+    |---temp[1-*]_input:       The current temperature of thermal zone [1-*]
+    |---temp[1-*]_critical:    The critical trip point of thermal zone [1-*]
+
 Please read Documentation/hwmon/sysfs-interface for additional information.
 
 ***************************
 * Thermal zone attributes *
 ***************************
 
-type                           Strings which represent the thermal zone type.
-                               This is given by thermal zone driver as part of registration.
-                               Eg: "acpitz" indicates it's an ACPI thermal device.
-                               In order to keep it consistent with hwmon sys attribute,
-                               this should be a short, lowercase string,
-                               not containing spaces nor dashes.
-                               RO
-                               Required
-
-temp                           Current temperature as reported by thermal zone (sensor)
-                               Unit: millidegree Celsius
-                               RO
-                               Required
-
-mode                           One of the predefined values in [kernel, user]
-                               This file gives information about the algorithm
-                               that is currently managing the thermal zone.
-                               It can be either default kernel based algorithm
-                               or user space application.
-                               RW
-                               Optional
-                               kernel  = Thermal management in kernel thermal zone driver.
-                               user    = Preventing kernel thermal zone driver actions upon
-                                         trip points so that user application can take full
-                                         charge of the thermal management.
-
-trip_point_[0-*]_temp          The temperature above which trip point will be fired
-                               Unit: millidegree Celsius
-                               RO
-                               Optional
-
-trip_point_[0-*]_type          Strings which indicate the type of the trip point
-                               E.g. it can be one of critical, hot, passive,
-                                   active[0-*] for ACPI thermal zone.
-                               RO
-                               Optional
-
-cdev[0-*]                      Sysfs link to the thermal cooling device node where the sys I/F
-                               for cooling device throttling control represents.
-                               RO
-                               Optional
-
-cdev[0-*]_trip_point           The trip point with which cdev[0-*] is associated in this thermal zone
-                               -1 means the cooling device is not associated with any trip point.
-                               RO
-                               Optional
-
-******************************
-* Cooling device  attributes *
-******************************
-
-type                           String which represents the type of device
-                               eg: For generic ACPI: this should be "Fan",
-                               "Processor" or "LCD"
-                               eg. For memory controller device on intel_menlow platform:
-                               this should be "Memory controller"
-                               RO
-                               Required
-
-max_state                      The maximum permissible cooling state of this cooling device.
-                               RO
-                               Required
-
-cur_state                      The current cooling state of this cooling device.
-                               the value can any integer numbers between 0 and max_state,
-                               cur_state == 0 means no cooling
-                               cur_state == max_state means the maximum cooling.
-                               RW
-                               Required
+type
+       Strings which represent the thermal zone type.
+       This is given by thermal zone driver as part of registration.
+       E.g: "acpitz" indicates it's an ACPI thermal device.
+       In order to keep it consistent with hwmon sys attribute; this should
+       be a short, lowercase string, not containing spaces nor dashes.
+       RO, Required
+
+temp
+       Current temperature as reported by thermal zone (sensor).
+       Unit: millidegree Celsius
+       RO, Required
+
+mode
+       One of the predefined values in [kernel, user].
+       This file gives information about the algorithm that is currently
+       managing the thermal zone. It can be either default kernel based
+       algorithm or user space application.
+       kernel  = Thermal management in kernel thermal zone driver.
+       user    = Preventing kernel thermal zone driver actions upon
+                 trip points so that user application can take full
+                 charge of the thermal management.
+       RW, Optional
+
+trip_point_[0-*]_temp
+       The temperature above which trip point will be fired.
+       Unit: millidegree Celsius
+       RO, Optional
+
+trip_point_[0-*]_type
+       Strings which indicate the type of the trip point.
+       E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
+       thermal zone.
+       RO, Optional
+
+cdev[0-*]
+       Sysfs link to the thermal cooling device node where the sys I/F
+       for cooling device throttling control represents.
+       RO, Optional
+
+cdev[0-*]_trip_point
+       The trip point with which cdev[0-*] is associated in this thermal
+       zone; -1 means the cooling device is not associated with any trip
+       point.
+       RO, Optional
+
+passive
+       Attribute is only present for zones in which the passive cooling
+       policy is not supported by native thermal driver. Default is zero
+       and can be set to a temperature (in millidegrees) to enable a
+       passive trip point for the zone. Activation is done by polling with
+       an interval of 1 second.
+       Unit: millidegrees Celsius
+       RW, Optional
+
+*****************************
+* Cooling device attributes *
+*****************************
+
+type
+       String which represents the type of device, e.g:
+       - for generic ACPI: should be "Fan", "Processor" or "LCD"
+       - for memory controller device on intel_menlow platform:
+         should be "Memory controller".
+       RO, Required
+
+max_state
+       The maximum permissible cooling state of this cooling device.
+       RO, Required
+
+cur_state
+       The current cooling state of this cooling device.
+       The value can any integer numbers between 0 and max_state:
+       - cur_state == 0 means no cooling
+       - cur_state == max_state means the maximum cooling.
+       RW, Required
 
 3. A simple implementation
 
-ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
-If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
-it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
-It has one processor and one fan, which are both registered as thermal_cooling_device.
-If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
-the sys I/F structure will be built like this:
+ACPI thermal zone may support multiple trip points like critical, hot,
+passive, active. If an ACPI thermal zone supports critical, passive,
+active[0] and active[1] at the same time, it may register itself as a
+thermal_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as
+thermal_cooling_device.
+
+If the processor is listed in _PSL method, and the fan is listed in _AL0
+method, the sys I/F structure will be built like this:
 
 /sys/class/thermal:
 
 |thermal_zone1:
-       |-----type:                     acpitz
-       |-----temp:                     37000
-       |-----mode:                     kernel
-       |-----trip_point_0_temp:        100000
-       |-----trip_point_0_type:        critical
-       |-----trip_point_1_temp:        80000
-       |-----trip_point_1_type:        passive
-       |-----trip_point_2_temp:        70000
-       |-----trip_point_2_type:        active0
-       |-----trip_point_3_temp:        60000
-       |-----trip_point_3_type:        active1
-       |-----cdev0:                    --->/sys/class/thermal/cooling_device0
-       |-----cdev0_trip_point:         1       /* cdev0 can be used for passive */
-       |-----cdev1:                    --->/sys/class/thermal/cooling_device3
-       |-----cdev1_trip_point:         2       /* cdev1 can be used for active[0]*/
+    |---type:                  acpitz
+    |---temp:                  37000
+    |---mode:                  kernel
+    |---trip_point_0_temp:     100000
+    |---trip_point_0_type:     critical
+    |---trip_point_1_temp:     80000
+    |---trip_point_1_type:     passive
+    |---trip_point_2_temp:     70000
+    |---trip_point_2_type:     active0
+    |---trip_point_3_temp:     60000
+    |---trip_point_3_type:     active1
+    |---cdev0:                 --->/sys/class/thermal/cooling_device0
+    |---cdev0_trip_point:      1       /* cdev0 can be used for passive */
+    |---cdev1:                 --->/sys/class/thermal/cooling_device3
+    |---cdev1_trip_point:      2       /* cdev1 can be used for active[0]*/
 
 |cooling_device0:
-       |-----type:                     Processor
-       |-----max_state:                8
-       |-----cur_state:                0
+    |---type:                  Processor
+    |---max_state:             8
+    |---cur_state:             0
 
 |cooling_device3:
-       |-----type:                     Fan
-       |-----max_state:                2
-       |-----cur_state:                0
+    |---type:                  Fan
+    |---max_state:             2
+    |---cur_state:             0
 
 /sys/class/hwmon:
 
 |hwmon0:
-       |-----name:                     acpitz
-       |-----temp1_input:              37000
-       |-----temp1_crit:               100000
+    |---name:                  acpitz
+    |---temp1_input:           37000
+    |---temp1_crit:            100000
index 957b22f..8179692 100644 (file)
@@ -1231,6 +1231,7 @@ something like this simple program:
 #include <sys/stat.h>
 #include <fcntl.h>
 #include <unistd.h>
+#include <string.h>
 
 #define _STR(x) #x
 #define STR(x) _STR(x)
@@ -1265,6 +1266,7 @@ const char *find_debugfs(void)
                return NULL;
        }
 
+       strcat(debugfs, "/tracing/");
        debugfs_found = 1;
 
        return debugfs;
index 3ec4f2a..4793c6a 100644 (file)
@@ -218,7 +218,7 @@ static void fatal(const char *x, ...)
        exit(EXIT_FAILURE);
 }
 
-int checked_open(const char *pathname, int flags)
+static int checked_open(const char *pathname, int flags)
 {
        int fd = open(pathname, flags);
 
index 1371648..6990f49 100644 (file)
@@ -182,7 +182,7 @@ M:  Ron Minnich <rminnich@sandia.gov>
 M:     Latchesar Ionkov <lucho@ionkov.net>
 L:     v9fs-developer@lists.sourceforge.net
 W:     http://swik.net/v9fs
-T:     git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs.git
 S:     Maintained
 F:     Documentation/filesystems/9p.txt
 F:     fs/9p/
@@ -512,10 +512,32 @@ W:        http://www.arm.linux.org.uk/
 S:     Maintained
 F:     arch/arm/
 
+ARM PRIMECELL AACI PL041 DRIVER
+M:     Russell King <linux@arm.linux.org.uk>
+S:     Maintained
+F:     sound/arm/aaci.*
+
+ARM PRIMECELL CLCD PL110 DRIVER
+M:     Russell King <linux@arm.linux.org.uk>
+S:     Maintained
+F:     drivers/video/amba-clcd.*
+
+ARM PRIMECELL KMI PL050 DRIVER
+M:     Russell King <linux@arm.linux.org.uk>
+S:     Maintained
+F:     drivers/input/serio/ambakmi.*
+F:     include/linux/amba/kmi.h
+
 ARM PRIMECELL MMCI PL180/1 DRIVER
 S:     Orphan
 F:     drivers/mmc/host/mmci.*
 
+ARM PRIMECELL BUS SUPPORT
+M:     Russell King <linux@arm.linux.org.uk>
+S:     Maintained
+F:     drivers/amba/
+F:     include/linux/amba/bus.h
+
 ARM/ADI ROADRUNNER MACHINE SUPPORT
 M:     Lennert Buytenhek <kernel@wantstofly.org>
 L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -906,7 +928,6 @@ M:  Karol Kozimor <sziwan@users.sourceforge.net>
 L:     acpi4asus-user@lists.sourceforge.net
 W:     http://acpi4asus.sf.net
 S:     Maintained
-F:     arch/x86/kernel/acpi/boot.c
 F:     drivers/platform/x86/asus_acpi.c
 
 ASUS ASB100 HARDWARE MONITOR DRIVER
@@ -1028,7 +1049,7 @@ F:        drivers/serial/atmel_serial.c
 
 ATMEL LCDFB DRIVER
 M:     Nicolas Ferre <nicolas.ferre@atmel.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/atmel_lcdfb.c
 F:     include/video/atmel_lcdc.h
@@ -1245,11 +1266,10 @@ S:      Supported
 F:     drivers/net/tg3.*
 
 BROCADE BFA FC SCSI DRIVER
-P:      Jing Huang
-M:      huangj@brocade.com
-L:      linux-scsi@vger.kernel.org
-S:      Supported
-F:      drivers/scsi/bfa/
+M:     Jing Huang <huangj@brocade.com>
+L:     linux-scsi@vger.kernel.org
+S:     Supported
+F:     drivers/scsi/bfa/
 
 BSG (block layer generic sg v4 driver)
 M:     FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
@@ -2128,7 +2148,7 @@ F:        drivers/net/wan/dlci.c
 F:     drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 W:     http://linux-fbdev.sourceforge.net/
 S:     Orphan
 F:     Documentation/fb/
@@ -2151,7 +2171,7 @@ F:        drivers/i2c/busses/i2c-cpm.c
 
 FREESCALE IMX / MXC FRAMEBUFFER DRIVER
 M:     Sascha Hauer <kernel@pengutronix.de>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:     Maintained
 F:     arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2327,6 +2347,13 @@ T:       git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:     Maintained
 F:     drivers/media/video/gspca/finepix.c
 
+GSPCA GL860 SUBDRIVER
+M:     Olivier Lorin <o.lorin@laposte.net>
+L:     linux-media@vger.kernel.org
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S:     Maintained
+F:     drivers/media/video/gspca/gl860/
+
 GSPCA M5602 SUBDRIVER
 M:     Erik Andren <erik.andren@gmail.com>
 L:     linux-media@vger.kernel.org
@@ -2548,8 +2575,7 @@ S:        Maintained
 F:     Documentation/i2c/
 F:     drivers/i2c/
 F:     include/linux/i2c.h
-F:     include/linux/i2c-dev.h
-F:     include/linux/i2c-id.h
+F:     include/linux/i2c-*.h
 
 I2C-TINY-USB DRIVER
 M:     Till Harbaum <till@harbaum.org>
@@ -2650,7 +2676,7 @@ S:        Supported
 F:     security/integrity/ima/
 
 IMS TWINTURBO FRAMEBUFFER DRIVER
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Orphan
 F:     drivers/video/imsttfb.c
 
@@ -2685,14 +2711,14 @@ F:      drivers/input/
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
 M:     Sylvain Meyer <sylvain.meyer@worldonline.fr>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     Documentation/fb/intelfb.txt
 F:     drivers/video/intelfb/
 
 INTEL 810/815 FRAMEBUFFER DRIVER
 M:     Antonino Daplas <adaplas@gmail.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/i810/
 
@@ -2838,7 +2864,7 @@ F:        drivers/infiniband/hw/ipath/
 
 IPMI SUBSYSTEM
 M:     Corey Minyard <minyard@acm.org>
-L:     openipmi-developer@lists.sourceforge.net
+L:     openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
 W:     http://openipmi.sourceforge.net/
 S:     Supported
 F:     Documentation/IPMI.txt
@@ -3002,11 +3028,8 @@ S:       Maintained
 F:     fs/autofs4/
 
 KERNEL BUILD
-M:     Sam Ravnborg <sam@ravnborg.org>
-T:     git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
-T:     git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:     linux-kbuild@vger.kernel.org
-S:     Maintained
+S:     Orphan
 F:     Documentation/kbuild/
 F:     Makefile
 F:     scripts/Makefile.*
@@ -3099,9 +3122,13 @@ F:       kernel/kgdb.c
 
 KMEMCHECK
 M:     Vegard Nossum <vegardno@ifi.uio.no>
-P      Pekka Enberg
-M:     penberg@cs.helsinki.fi
+M:     Pekka Enberg <penberg@cs.helsinki.fi>
 S:     Maintained
+F:     Documentation/kmemcheck.txt
+F:     arch/x86/include/asm/kmemcheck.h
+F:     arch/x86/mm/kmemcheck/
+F:     include/linux/kmemcheck.h
+F:     mm/kmemcheck.c
 
 KMEMLEAK
 M:     Catalin Marinas <catalin.marinas@arm.com>
@@ -3402,7 +3429,7 @@ S:        Supported
 
 MATROX FRAMEBUFFER DRIVER
 M:     Petr Vandrovec <vandrove@vc.cvut.cz>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/matrox/matroxfb_*
 F:     include/linux/matroxfb.h
@@ -3631,7 +3658,7 @@ L:        netfilter@vger.kernel.org
 L:     coreteam@netfilter.org
 W:     http://www.netfilter.org/
 W:     http://www.iptables.org/
-T:     git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
 S:     Supported
 F:     include/linux/netfilter*
 F:     include/linux/netfilter/
@@ -3678,6 +3705,7 @@ L:        netdev@vger.kernel.org
 W:     http://www.linuxfoundation.org/en/Net
 W:     http://patchwork.ozlabs.org/project/netdev/list/
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 S:     Maintained
 F:     net/
 F:     include/net/
@@ -3788,7 +3816,7 @@ F:        fs/ntfs/
 
 NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
 M:     Antonino Daplas <adaplas@gmail.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/riva/
 F:     drivers/video/nvidia/
@@ -3823,7 +3851,7 @@ F:        sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
 M:     Imre Deak <imre.deak@nokia.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 L:     linux-omap@vger.kernel.org
 S:     Maintained
 F:     drivers/video/omap/
@@ -4329,19 +4357,21 @@ F:      include/linux/qnxtypes.h
 
 RADEON FRAMEBUFFER DISPLAY DRIVER
 M:     Benjamin Herrenschmidt <benh@kernel.crashing.org>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/aty/radeon*
 F:     include/linux/radeonfb.h
 
 RAGE128 FRAMEBUFFER DISPLAY DRIVER
 M:     Paul Mackerras <paulus@samba.org>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/aty/aty128fb.c
 
 RALINK RT2X00 WIRELESS LAN DRIVER
 P:     rt2x00 project
+M:     Ivo van Doorn <IvDoorn@gmail.com>
+M:     Gertjan van Wingerde <gwingerde@gmail.com>
 L:     linux-wireless@vger.kernel.org
 L:     users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:     http://rt2x00.serialmonkey.com/
@@ -4429,7 +4459,7 @@ RFKILL
 M:     Johannes Berg <johannes@sipsolutions.net>
 L:     linux-wireless@vger.kernel.org
 S:     Maintained
-F      Documentation/rfkill.txt
+F:     Documentation/rfkill.txt
 F:     net/rfkill/
 
 RISCOM8 DRIVER
@@ -4473,7 +4503,7 @@ F:        drivers/net/wireless/rtl818x/rtl8187*
 
 S3 SAVAGE FRAMEBUFFER DRIVER
 M:     Antonino Daplas <adaplas@gmail.com>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/savage/
 
@@ -4649,7 +4679,7 @@ F:        drivers/mmc/host/sdhci-s3c.c
 SECURITY SUBSYSTEM
 M:     James Morris <jmorris@namei.org>
 L:     linux-security-module@vger.kernel.org (suggested Cc:)
-T:     git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
 W:     http://security.wiki.kernel.org/
 S:     Supported
 F:     security/
@@ -4685,12 +4715,11 @@ F:      include/linux/ata.h
 F:     include/linux/libata.h
 
 SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
-P:     Jayamohan Kallickal
-M:     jayamohank@serverengines.com
-L:     linux-scsi@vger.kernel.org
-W:     http://www.serverengines.com
-S:     Supported
-F:     drivers/scsi/be2iscsi/
+M:     Jayamohan Kallickal <jayamohank@serverengines.com>
+L:     linux-scsi@vger.kernel.org
+W:     http://www.serverengines.com
+S:     Supported
+F:     drivers/scsi/be2iscsi/
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:     Sathya Perla <sathyap@serverengines.com>
@@ -5637,7 +5666,7 @@ S:        Maintained
 
 UVESAFB DRIVER
 M:     Michal Januszewski <spock@gentoo.org>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 W:     http://dev.gentoo.org/~spock/projects/uvesafb/
 S:     Maintained
 F:     Documentation/fb/uvesafb.txt
@@ -5670,7 +5699,7 @@ F:        drivers/mmc/host/via-sdmmc.c
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
 M:     Joseph Chan <JosephChan@via.com.tw>
 M:     Scott Fang <ScottFang@viatech.com.cn>
-L:     linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/via/
 
@@ -5696,11 +5725,11 @@ F:      drivers/vlynq/vlynq.c
 F:     include/linux/vlynq.h
 
 VMWARE VMXNET3 ETHERNET DRIVER
-M:     Shreyas Bhatewara <sbhatewara@vmware.com>
-M:     VMware, Inc. <pv-drivers@vmware.com>
-L:     netdev@vger.kernel.org
-S:     Maintained
-F:     drivers/net/vmxnet3/
+M:     Shreyas Bhatewara <sbhatewara@vmware.com>
+M:     "VMware, Inc." <pv-drivers@vmware.com>
+L:     netdev@vger.kernel.org
+S:     Maintained
+F:     drivers/net/vmxnet3/
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
 M:     Liam Girdwood <lrg@slimlogic.co.uk>
index 9425d1d..f5cdb72 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -221,7 +221,7 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 
 HOSTCC       = gcc
 HOSTCXX      = g++
-HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
 HOSTCXXFLAGS = -O2
 
 # Decide whether to build built-in, modular, or both.
index 9d0727d..367d53d 100644 (file)
@@ -35,7 +35,7 @@
 const char * prog_name;
 
 
-void
+static void
 usage (void)
 {
     fprintf(stderr,
index e42823e..25da001 100644 (file)
@@ -26,8 +26,6 @@
 #define F_GETOWN       6       /*  for sockets. */
 #define F_SETSIG       10      /*  for sockets. */
 #define F_GETSIG       11      /*  for sockets. */
-#define F_SETOWN_EX    12
-#define F_GETOWN_EX    13
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK                1
index 5076a88..b3e8886 100644 (file)
@@ -50,32 +50,35 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("$8");
 #define current_thread_info()  __current_thread_info
 
+#endif /* __ASSEMBLY__ */
+
 /* Thread information allocation.  */
 #define THREAD_SIZE_ORDER 1
 #define THREAD_SIZE (2*PAGE_SIZE)
 
-#endif /* __ASSEMBLY__ */
-
 #define PREEMPT_ACTIVE         0x40000000
 
 /*
  * Thread information flags:
  * - these are process state flags and used from assembly
- * - pending work-to-be-done flags come first to fit in and immediate operand.
+ * - pending work-to-be-done flags come first and must be assigned to be
+ *   within bits 0 to 7 to fit in and immediate operand.
+ * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
+ *   control flags.
  *
  * TIF_SYSCALL_TRACE is known to be 0 via blbs.
  */
 #define TIF_SYSCALL_TRACE      0       /* syscall trace active */
-#define TIF_SIGPENDING         1       /* signal pending */
-#define TIF_NEED_RESCHED       2       /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG     3       /* poll_idle is polling NEED_RESCHED */
-#define TIF_DIE_IF_KERNEL      4       /* dik recursion lock */
-#define TIF_UAC_NOPRINT                5       /* see sysinfo.h */
-#define TIF_UAC_NOFIX          6
-#define TIF_UAC_SIGBUS         7
-#define TIF_MEMDIE             8
-#define TIF_RESTORE_SIGMASK    9       /* restore signal mask in do_signal */
-#define TIF_NOTIFY_RESUME      10      /* callback before returning to user */
+#define TIF_NOTIFY_RESUME      1       /* callback before returning to user */
+#define TIF_SIGPENDING         2       /* signal pending */
+#define TIF_NEED_RESCHED       3       /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG     8       /* poll_idle is polling NEED_RESCHED */
+#define TIF_DIE_IF_KERNEL      9       /* dik recursion lock */
+#define TIF_UAC_NOPRINT                10      /* see sysinfo.h */
+#define TIF_UAC_NOFIX          11
+#define TIF_UAC_SIGBUS         12
+#define TIF_MEMDIE             13
+#define TIF_RESTORE_SIGMASK    14      /* restore signal mask in do_signal */
 #define TIF_FREEZE             16      /* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE     (1<<TIF_SYSCALL_TRACE)
@@ -94,7 +97,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_ALLWORK_MASK      (_TIF_WORK_MASK         \
                                 | _TIF_SYSCALL_TRACE)
 
-#define ALPHA_UAC_SHIFT                6
+#define ALPHA_UAC_SHIFT                10
 #define ALPHA_UAC_MASK         (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
                                 1 << TIF_UAC_SIGBUS)
 
index 8e059e5..53dd2f1 100644 (file)
@@ -1103,6 +1103,8 @@ marvel_agp_info(void)
         * Allocate the info structure.
         */
        agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+       if (!agp)
+               return NULL;
 
        /*
         * Fill it in.
index 7668649..219bf27 100644 (file)
@@ -757,6 +757,8 @@ titan_agp_info(void)
         * Allocate the info structure.
         */
        agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+       if (!agp)
+               return NULL;
 
        /*
         * Fill it in.
index cc78346..c0de072 100644 (file)
@@ -92,7 +92,7 @@ show_interrupts(struct seq_file *p, void *v)
                for_each_online_cpu(j)
                        seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
 #endif
-               seq_printf(p, " %14s", irq_desc[irq].chip->typename);
+               seq_printf(p, " %14s", irq_desc[irq].chip->name);
                seq_printf(p, "  %c%s",
                        (action->flags & IRQF_DISABLED)?'+':' ',
                        action->name);
index 38c805d..cfde865 100644 (file)
@@ -228,7 +228,7 @@ struct irqaction timer_irqaction = {
 };
 
 static struct irq_chip rtc_irq_type = {
-       .typename       = "RTC",
+       .name           = "RTC",
        .startup        = rtc_startup,
        .shutdown       = rtc_enable_disable,
        .enable         = rtc_enable_disable,
index 50bfec9..83a9ac2 100644 (file)
@@ -84,7 +84,7 @@ i8259a_end_irq(unsigned int irq)
 }
 
 struct irq_chip i8259a_irq_type = {
-       .typename       = "XT-PIC",
+       .name           = "XT-PIC",
        .startup        = i8259a_startup_irq,
        .shutdown       = i8259a_disable_irq,
        .enable         = i8259a_enable_irq,
index 69199a7..989ce46 100644 (file)
@@ -71,7 +71,7 @@ pyxis_mask_and_ack_irq(unsigned int irq)
 }
 
 static struct irq_chip pyxis_irq_type = {
-       .typename       = "PYXIS",
+       .name           = "PYXIS",
        .startup        = pyxis_startup_irq,
        .shutdown       = pyxis_disable_irq,
        .enable         = pyxis_enable_irq,
index 8522936..d63e93e 100644 (file)
@@ -49,7 +49,7 @@ srm_end_irq(unsigned int irq)
 
 /* Handle interrupts from the SRM, assuming no additional weirdness.  */
 static struct irq_chip srm_irq_type = {
-       .typename       = "SRM",
+       .name           = "SRM",
        .startup        = srm_startup_irq,
        .shutdown       = srm_disable_irq,
        .enable         = srm_enable_irq,
index 382035e..20a30b8 100644 (file)
@@ -90,7 +90,7 @@ alcor_end_irq(unsigned int irq)
 }
 
 static struct irq_chip alcor_irq_type = {
-       .typename       = "ALCOR",
+       .name           = "ALCOR",
        .startup        = alcor_startup_irq,
        .shutdown       = alcor_disable_irq,
        .enable         = alcor_enable_irq,
index ed34943..affd0f3 100644 (file)
@@ -72,7 +72,7 @@ cabriolet_end_irq(unsigned int irq)
 }
 
 static struct irq_chip cabriolet_irq_type = {
-       .typename       = "CABRIOLET",
+       .name           = "CABRIOLET",
        .startup        = cabriolet_startup_irq,
        .shutdown       = cabriolet_disable_irq,
        .enable         = cabriolet_enable_irq,
index 46e70ec..d64e1e4 100644 (file)
@@ -199,7 +199,7 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 }
 
 static struct irq_chip dp264_irq_type = {
-       .typename       = "DP264",
+       .name           = "DP264",
        .startup        = dp264_startup_irq,
        .shutdown       = dp264_disable_irq,
        .enable         = dp264_enable_irq,
@@ -210,7 +210,7 @@ static struct irq_chip dp264_irq_type = {
 };
 
 static struct irq_chip clipper_irq_type = {
-       .typename       = "CLIPPER",
+       .name           = "CLIPPER",
        .startup        = clipper_startup_irq,
        .shutdown       = clipper_disable_irq,
        .enable         = clipper_enable_irq,
index 660c23e..df2090c 100644 (file)
@@ -70,7 +70,7 @@ eb64p_end_irq(unsigned int irq)
 }
 
 static struct irq_chip eb64p_irq_type = {
-       .typename       = "EB64P",
+       .name           = "EB64P",
        .startup        = eb64p_startup_irq,
        .shutdown       = eb64p_disable_irq,
        .enable         = eb64p_enable_irq,
index b99ea48..3ca1dbc 100644 (file)
@@ -81,7 +81,7 @@ eiger_end_irq(unsigned int irq)
 }
 
 static struct irq_chip eiger_irq_type = {
-       .typename       = "EIGER",
+       .name           = "EIGER",
        .startup        = eiger_startup_irq,
        .shutdown       = eiger_disable_irq,
        .enable         = eiger_enable_irq,
index ef0b83a..7a7ae36 100644 (file)
@@ -119,7 +119,7 @@ jensen_local_end(unsigned int irq)
 }
 
 static struct irq_chip jensen_local_irq_type = {
-       .typename       = "LOCAL",
+       .name           = "LOCAL",
        .startup        = jensen_local_startup,
        .shutdown       = jensen_local_shutdown,
        .enable         = jensen_local_enable,
index bbfc4f2..0bb3b5c 100644 (file)
@@ -170,7 +170,7 @@ marvel_irq_noop_return(unsigned int irq)
 }
 
 static struct irq_chip marvel_legacy_irq_type = {
-       .typename       = "LEGACY",
+       .name           = "LEGACY",
        .startup        = marvel_irq_noop_return,
        .shutdown       = marvel_irq_noop,
        .enable         = marvel_irq_noop,
@@ -180,7 +180,7 @@ static struct irq_chip marvel_legacy_irq_type = {
 };
 
 static struct irq_chip io7_lsi_irq_type = {
-       .typename       = "LSI",
+       .name           = "LSI",
        .startup        = io7_startup_irq,
        .shutdown       = io7_disable_irq,
        .enable         = io7_enable_irq,
@@ -190,7 +190,7 @@ static struct irq_chip io7_lsi_irq_type = {
 };
 
 static struct irq_chip io7_msi_irq_type = {
-       .typename       = "MSI",
+       .name           = "MSI",
        .startup        = io7_startup_irq,
        .shutdown       = io7_disable_irq,
        .enable         = io7_enable_irq,
index 4e36664..ee88651 100644 (file)
@@ -69,7 +69,7 @@ mikasa_end_irq(unsigned int irq)
 }
 
 static struct irq_chip mikasa_irq_type = {
-       .typename       = "MIKASA",
+       .name           = "MIKASA",
        .startup        = mikasa_startup_irq,
        .shutdown       = mikasa_disable_irq,
        .enable         = mikasa_enable_irq,
index 35753a1..86503fe 100644 (file)
@@ -74,7 +74,7 @@ noritake_end_irq(unsigned int irq)
 }
 
 static struct irq_chip noritake_irq_type = {
-       .typename       = "NORITAKE",
+       .name           = "NORITAKE",
        .startup        = noritake_startup_irq,
        .shutdown       = noritake_disable_irq,
        .enable         = noritake_enable_irq,
index f3aec7e..26c322b 100644 (file)
@@ -136,7 +136,7 @@ rawhide_end_irq(unsigned int irq)
 }
 
 static struct irq_chip rawhide_irq_type = {
-       .typename       = "RAWHIDE",
+       .name           = "RAWHIDE",
        .startup        = rawhide_startup_irq,
        .shutdown       = rawhide_disable_irq,
        .enable         = rawhide_enable_irq,
index d9f9cfe..8de1046 100644 (file)
@@ -66,7 +66,7 @@ ruffian_init_irq(void)
        common_init_isa_dma();
 }
 
-#define RUFFIAN_LATCH  ((PIT_TICK_RATE + HZ / 2) / HZ)
+#define RUFFIAN_LATCH  DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ)
 
 static void __init
 ruffian_init_rtc(void)
index fc92463..be16112 100644 (file)
@@ -73,7 +73,7 @@ rx164_end_irq(unsigned int irq)
 }
 
 static struct irq_chip rx164_irq_type = {
-       .typename       = "RX164",
+       .name           = "RX164",
        .startup        = rx164_startup_irq,
        .shutdown       = rx164_disable_irq,
        .enable         = rx164_enable_irq,
index 426eb69..b2abe27 100644 (file)
@@ -502,7 +502,7 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
 }
 
 static struct irq_chip sable_lynx_irq_type = {
-       .typename       = "SABLE/LYNX",
+       .name           = "SABLE/LYNX",
        .startup        = sable_lynx_startup_irq,
        .shutdown       = sable_lynx_disable_irq,
        .enable         = sable_lynx_enable_irq,
index 830318c..2304648 100644 (file)
@@ -75,7 +75,7 @@ takara_end_irq(unsigned int irq)
 }
 
 static struct irq_chip takara_irq_type = {
-       .typename       = "TAKARA",
+       .name           = "TAKARA",
        .startup        = takara_startup_irq,
        .shutdown       = takara_disable_irq,
        .enable         = takara_enable_irq,
index 88978fc..2880533 100644 (file)
@@ -195,7 +195,7 @@ init_titan_irqs(struct irq_chip * ops, int imin, int imax)
 }
 
 static struct irq_chip titan_irq_type = {
-       .typename       = "TITAN",
+       .name          = "TITAN",
        .startup        = titan_startup_irq,
        .shutdown       = titan_disable_irq,
        .enable         = titan_enable_irq,
index e91b4c3..62fd972 100644 (file)
@@ -158,7 +158,7 @@ wildfire_end_irq(unsigned int irq)
 }
 
 static struct irq_chip wildfire_irq_type = {
-       .typename       = "WILDFIRE",
+       .name           = "WILDFIRE",
        .startup        = wildfire_startup_irq,
        .shutdown       = wildfire_disable_irq,
        .enable         = wildfire_enable_irq,
index 7647325..e8f7380 100644 (file)
@@ -55,10 +55,10 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS is not set
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -224,7 +224,7 @@ CONFIG_CPU_CP15_MMU=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
@@ -248,7 +248,7 @@ CONFIG_CPU_DCACHE_WRITETHROUGH=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -299,7 +299,9 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
 
 #
 # Networking
@@ -670,7 +672,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -784,6 +786,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Dallas's 1-wire bus
@@ -820,6 +823,7 @@ CONFIG_LEDS_AMS_DELTA=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # Multimedia devices
@@ -896,7 +900,13 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_AMS_DELTA=y
 
 #
 # HID Devices
index af74cc2..bcfade3 100644 (file)
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 11:58:57 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov  7 20:31:18 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
 # CONFIG_GROUP_SCHED is not set
@@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -86,6 +83,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -95,13 +96,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_OPENRD_BASE=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
 # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
@@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 
 #
 # Boot options
@@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_MINSTREL=y
 # CONFIG_MAC80211_RC_DEFAULT_PID is not set
 CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
@@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
 # CONFIG_SATA_SIL24 is not set
@@ -649,6 +671,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -676,6 +699,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -693,13 +717,16 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -768,6 +795,9 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
@@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI is not set
@@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 # CONFIG_HERMES is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_WHCI_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
 # CONFIG_MMC_SPI is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1379,10 +1462,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
@@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_BINARY_PRINTF=y
 
index b54ad2e..150deaf 100644 (file)
@@ -611,7 +611,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -634,7 +634,8 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 
 #
 # Hardware I/O ports
@@ -834,7 +835,29 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_USB=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_TWL4030=y
+
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1020,7 +1043,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1084,9 +1113,12 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_TWL4030=y
+
 #
 # File systems
 #
@@ -1407,3 +1439,10 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+
+# added by hand for now
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_TWL4030_USB=y
+CONFIG_MMC_OMAP_HS=y
+
index 8a4a7e2..5a305f0 100644 (file)
@@ -1703,7 +1703,14 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
index 9e23852..5383cd0 100644 (file)
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 14:07:25 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov  7 20:52:21 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -82,6 +79,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
@@ -91,13 +92,17 @@ CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Orion Implementations
@@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_EDMINI_V2=y
+CONFIG_MACH_D2NET=y
+CONFIG_MACH_BIGDISK=y
+CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2=y
 CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
@@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
 CONFIG_CPU_TLB_FEROCEON=y
@@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
@@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
 
 #
 # Boot options
@@ -308,6 +324,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
@@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -658,6 +686,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -685,6 +714,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -703,13 +733,16 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -777,6 +810,8 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set