[ARM] 3674/1: ep93xx: add cirrus logic edb9302 support
Lennert Buytenhek [Thu, 29 Jun 2006 15:06:31 +0000 (16:06 +0100)]
Patch from Lennert Buytenhek

This patch adds support for the Cirrus Logic EDB9302, an evaluation
board based on the Cirrus Logic EP9302 SoC, with 32M RAM, one USB host
port, audio in/out, two serial ports and a 10/100 ethernet interface.

George Kashperko submitted the original patch, this patch is a rewrite
using the newer physmap platform driver.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-ep93xx/Kconfig
arch/arm/mach-ep93xx/Makefile
arch/arm/mach-ep93xx/edb9302.c [new file with mode: 0644]

index e15e4c5..c7c11f4 100644 (file)
@@ -9,6 +9,12 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+config MACH_EDB9302
+       bool "Support Cirrus Logic EDB9302"
+       help
+         Say 'Y' here if you want your kernel to support the Cirrus
+         Logic EDB9302 Evaluation Board.
+
 config MACH_EDB9315
        bool "Support Cirrus Logic EDB9315"
        help
index dfa7e2e..feda783 100644 (file)
@@ -6,6 +6,7 @@ obj-m                   :=
 obj-n                  :=
 obj-                   :=
 
+obj-$(CONFIG_MACH_EDB9302)     += edb9302.o
 obj-$(CONFIG_MACH_EDB9315)     += edb9315.o
 obj-$(CONFIG_MACH_GESBC9312)   += gesbc9312.o
 obj-$(CONFIG_MACH_TS72XX)      += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
new file mode 100644 (file)
index 0000000..62a8efd
--- /dev/null
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9302.c
+ * Cirrus Logic EDB9302 support.
+ *
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9302_flash_data = {
+       .width          = 2,
+};
+
+static struct resource edb9302_flash_resource = {
+       .start          = 0x60000000,
+       .end            = 0x60ffffff,
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device edb9302_flash = {
+       .name           = "physmap-flash",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &edb9302_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &edb9302_flash_resource,
+};
+
+static void __init edb9302_init_machine(void)
+{
+       ep93xx_init_devices();
+       platform_device_register(&edb9302_flash);
+}
+
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+       /* Maintainer: George Kashperko <george@chas.com.ua> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = edb9302_init_machine,
+MACHINE_END