Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
+What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
KernelVersion: 2.635
Contact: linux-iio@vger.kernel.org
gives the 3dB frequency of the filter in Hz.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled, no bias etc.) output voltage for
channel Y. The number must always be specified and
unique if the output corresponds to a single channel.
+ While DAC like devices typically use out_voltage,
+ a continuous frequency generating device, such as
+ a DDS or PLL should use out_altvoltage.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
normal operation. Y may be suppressed if all outputs are
controlled together.
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Output frequency for channel Y in Hz. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Phase in radians of one frequency/clock output Y
+ (out_altvoltageY) relative to another frequency/clock output
+ (out_altvoltageZ) of the device X. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
What: /sys/bus/iio/devices/iio:deviceX/events
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
<row id="V4L2-PIX-FMT-Y4">
<entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
<entry>'Y04 '</entry>
- <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
+ <entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
<row id="V4L2-PIX-FMT-Y6">
<entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
<entry>'Y06 '</entry>
- <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
+ <entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
</tbody>
&sub-g-tuner;
&sub-log-status;
&sub-overlay;
+ &sub-prepare-buf;
&sub-qbuf;
&sub-querybuf;
&sub-querycap;
&sub-query-dv-preset;
&sub-query-dv-timings;
&sub-querystd;
- &sub-prepare-buf;
&sub-reqbufs;
&sub-s-hw-freq-seek;
&sub-streamon;
/></entry>
</row>
<row>
- <entry>__u32</entry>
+ <entry>struct v4l2_format</entry>
<entry><structfield>format</structfield></entry>
- <entry>Filled in by the application, preserved by the driver.
- See <xref linkend="v4l2-format" />.</entry>
+ <entry>Filled in by the application, preserved by the driver.</entry>
</row>
<row>
<entry>__u32</entry>
<row>
<entry></entry>
<entry>&v4l2-event-frame-sync;</entry>
- <entry><structfield>frame</structfield></entry>
+ <entry><structfield>frame_sync</structfield></entry>
<entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
</row>
<row>
Document Author
---------------
- Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
+ Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
Prefix: 'coretemp'
CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
- 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
+ 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+ 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+ 0x36 (Cedar Trail Atom)
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
Process Processor TjMax(C)
+22nm Core i5/i7 Processors
+ i7 3920XM, 3820QM, 3720QM, 3667U, 3520M 105
+ i5 3427U, 3360M/3320M 105
+ i7 3770/3770K 105
+ i5 3570/3570K, 3550, 3470/3450 105
+ i7 3770S 103
+ i5 3570S/3550S, 3475S/3470S/3450S 103
+ i7 3770T 94
+ i5 3570T 94
+ i5 3470T 91
+
32nm Core i3/i5/i7 Processors
i7 660UM/640/620, 640LM/620, 620M, 610E 105
i5 540UM/520/430, 540M/520/450/430 105
U3400 105
P4505/P4500 90
+32nm Atom Processors
+ Z2460 90
+ D2700/2550/2500 100
+ N2850/2800/2650/2600 100
+
45nm Xeon Processors 5400 Quad-Core
X5492, X5482, X5472, X5470, X5460, X5450 85
E5472, E5462, E5450/40/30/20/10/05 85
N475/470/455/450 100
N280/270 90
330/230 125
+ E680/660/640/620 90
+ E680T/660T/640T/620T 110
45nm Core2 Processors
Solo ULV SU3500/3300 100
F: net/appletalk/
ARASAN COMPACT FLASH PATA CONTROLLER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: include/linux/pata_arasan_cf_data.h
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
-M: Chris Mason <chris.mason@oracle.com>
+M: Chris Mason <chris.mason@fusionio.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
S: Maintained
F: Documentation/filesystems/btrfs.txt
F: fs/btrfs/
F: drivers/pinctrl/
PIN CONTROLLER - ST SPEAR
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: drivers/tty/serial
SYNOPSYS DESIGNWARE DMAC DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
S: Maintained
F: include/linux/dw_dmac.h
F: drivers/dma/dw_dmac_regs.h
F: drivers/mmc/host/sdhci-s3c.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/plat-spear/
SPEAR13XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/mach-spear13xx/
SPEAR3XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: arch/arm/mach-spear6xx/
SPEAR CLOCK FRAMEWORK SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
VME SUBSYSTEM
M: Martyn Welch <martyn.welch@ge.com>
-M: Manohar Vanga <manohar.vanga@cern.ch>
+M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
S: Maintained
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
KBUILD_CFLAGS += -O2
endif
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
ifdef CONFIG_READABLE_ASM
# Disable optimizations that make assembler listings hard to read.
# reorder blocks reorders the control in the function
$(call cc-option,-fno-partial-inlining)
endif
-include $(srctree)/arch/$(SRCARCH)/Makefile
-
ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
/include/ "mmp2.dtsi"
/ {
- model = "Marvell MMP2 Aspenite Development Board";
+ model = "Marvell MMP2 Brownstone Development Board";
compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
chosen {
};
memory {
- reg = <0x00000000 0x04000000>;
+ reg = <0x00000000 0x08000000>;
};
soc {
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {
/*
* DTS file for SPEAr1310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr1310 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr1340 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr1340 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr13xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr300 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr300 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr310 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr320 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr320 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr3xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
struct safe_buffer *buf;
unsigned long off;
- dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
- __func__, addr, off, sz, dir);
+ dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+ __func__, addr, sz, dir);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
BUG_ON(buf->direction != dir);
- dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
struct safe_buffer *buf;
unsigned long off;
- dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
- __func__, addr, off, sz, dir);
+ dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+ __func__, addr, sz, dir);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
BUG_ON(buf->direction != dir);
- dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
" .long 1b, 4f, 2b, 4f\n" \
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
"4: mov %0, " err_reg "\n" \
" b 3b\n" \
" .popsection"
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* The out of line fixup for the ldrt above.
*/
.pushsection .fixup, "ax"
+ .align 2
4: mov pc, r9
.popsection
.pushsection __ex_table,"a"
/* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
/* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
/* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
- DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+ DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
REGS(PC, NOSPPCX, 0, 0, 0)),
/* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
-obj-y := clock.o highbank.o system.o
+obj-y := clock.o highbank.o system.o smc.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
+
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
static inline void highbank_lluart_map_io(void) {}
#endif
+extern void highbank_smc1(int fn, int arg);
{}
};
+#ifdef CONFIG_CACHE_L2X0
+static void highbank_l2x0_disable(void)
+{
+ /* Disable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x0);
+}
+#endif
+
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Enable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x1);
l2x0_of_init(0, ~0UL);
+ outer_cache.disable = highbank_l2x0_disable;
+#endif
}
static void __init highbank_timer_init(void)
--- /dev/null
+/*
+ * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number.
+ * Function signature : void highbank_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(highbank_smc1)
+ stmfd sp!, {r4-r11, lr}
+ mov r12, r0
+ mov r0, r1
+ dsb
+ smc #0
+ ldmfd sp!, {r4-r11, pc}
+ENDPROC(highbank_smc1)
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
- mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
- MX1_TIM1_INT);
+ mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
- mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
- MX21_INT_GPT1);
+ mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
return 0;
}
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
- mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+ mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
}
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
- mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
- MX27_INT_GPT1);
+ mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[emi_ahb_gate]);
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
- mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
- MX31_INT_GPT);
+ mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(&epit1_clk,
- MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+ epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
- mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
- MX35_INT_GPT);
+ mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
#endif
return 0;
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
main_bus_sel, ARRAY_SIZE(main_bus_sel));
- clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+ clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
- clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+ clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
per_root_sel, ARRAY_SIZE(per_root_sel));
clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
- clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18);
clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
clk_set_rate(clk[esdhc_b_podf], 166250000);
/* System timer */
- mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
+ mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX51", mx51_revision());
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
- mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
+ mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
-static const char * const clks_init_on[] __initconst = {
- "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
-};
-
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
static struct clk *clk[clk_max];
+static enum mx6q_clks const clks_init_on[] __initconst = {
+ mmdc_ch0_axi, mmdc_ch1_axi,
+};
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
- struct clk *c;
int i, irq;
clk[dummy] = imx_clk_fixed("dummy", 0);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
- c = clk_get_sys(clks_init_on[i], NULL);
- if (IS_ERR(c)) {
- pr_err("%s: failed to get clk %s", __func__,
- clks_init_on[i]);
- return PTR_ERR(c);
- }
- clk_prepare_enable(c);
- }
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(NULL, base, irq);
+ mxc_timer_init(base, irq);
return 0;
}
void __iomem *base;
};
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+ u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
+ unsigned long dbl;
s64 temp;
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
-
- pllbase = pll->base;
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
return temp;
}
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
+ u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
+ void __iomem *pllbase;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+ return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+ u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
u32 reg;
- void __iomem *pllbase;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
-
- pllbase = pll->base;
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
return -EINVAL;
pdf--;
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
+ temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate / 1000000);
mfn = (long)temp64;
+ reg = mfi << 4 | pdf;
+
+ *dp_op = reg;
+ *dp_mfd = mfd;
+ *dp_mfn = mfn;
+
+ return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ void __iomem *pllbase;
+ u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+ int ret;
+
+ pllbase = pll->base;
+
+
+ ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+ if (ret)
+ return ret;
+
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
+
+ __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
return 0;
}
static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
- return rate;
+ u32 dp_op, dp_mfd, dp_mfn;
+
+ __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+ return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+ dp_op, dp_mfd, dp_mfn);
}
static int clk_pllv2_prepare(struct clk_hw *hw)
#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
#include <linux/errno.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
return 1;
}
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ "mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %3\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
/*
* platform-specific code to shutdown a CPU
*
*/
void platform_cpu_die(unsigned int cpu)
{
- flush_cache_all();
+ cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
+ cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
.irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x49),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
},
};
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
+ TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
+ TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
+static const struct gpio visstrim_m10_gpios[] __initconst = {
+ {
+ .gpio = TVP5150_RSTN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+ .label = "tvp5150_rstn",
+ },
+ {
+ .gpio = TVP5150_PWDN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "tvp5150_pwdn",
+ },
+ {
+ .gpio = OTG_PHY_CS_GPIO,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "usbotg_cs",
+ },
+};
+
/* Camera */
static int visstrim_camera_power(struct device *dev, int on)
{
struct platform_device *pdev;
int dma;
- /* Initialize tvp5150 gpios */
- mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
- gpio_set_value(TVP5150_RSTN, 1);
- gpio_set_value(TVP5150_PWDN, 0);
- ndelay(1);
-
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
+ ret = gpio_request_array(visstrim_m10_gpios,
+ ARRAY_SIZE(visstrim_m10_gpios));
+ if (ret)
+ pr_err("Failed to request gpios (%d)\n", ret);
+
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
-#define MX21ADS_MMIO_SIZE SZ_16M
+#define MX21ADS_MMIO_SIZE 0xc00000
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
void __init imx3_init_l2x0(void)
{
+#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+#endif
}
#ifdef CONFIG_SOC_IMX31
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+ pinctrl_provide_dummies();
+
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
+ pinctrl_provide_dummies();
+
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
+ gate_fn->fn = fn;
/* ops is the gate ops, but with our disable function */
if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
bit_idx, 0, &gating_lock, fn);
}
+static struct clk *ge0, *ge1;
+
void __init kirkwood_clk_init(void)
{
- struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+ struct clk *runit, *sata0, *sata1, *usb0, *sdio;
struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR);
+ /* The interface forgets the MAC address assigned by u-boot if
+ the clock is turned off, so claim the clk now. */
+ clk_prepare_enable(ge0);
}
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR);
+ clk_prepare_enable(ge1);
}
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
icu_data[1].nr_irqs = 2;
+ icu_data[1].cascade_irq = 4;
icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
icu_data[1].virq_base, 0,
icu_data[2].reg_status = mmp_icu_base + 0x154;
icu_data[2].reg_mask = mmp_icu_base + 0x16c;
icu_data[2].nr_irqs = 2;
+ icu_data[2].cascade_irq = 5;
icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
icu_data[2].virq_base, 0,
icu_data[3].reg_status = mmp_icu_base + 0x180;
icu_data[3].reg_mask = mmp_icu_base + 0x17c;
icu_data[3].nr_irqs = 3;
+ icu_data[3].cascade_irq = 9;
icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
icu_data[3].virq_base, 0,
icu_data[4].reg_status = mmp_icu_base + 0x158;
icu_data[4].reg_mask = mmp_icu_base + 0x170;
icu_data[4].nr_irqs = 5;
+ icu_data[4].cascade_irq = 17;
icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
icu_data[4].virq_base, 0,
icu_data[5].reg_status = mmp_icu_base + 0x15c;
icu_data[5].reg_mask = mmp_icu_base + 0x174;
icu_data[5].nr_irqs = 15;
+ icu_data[5].cascade_irq = 35;
icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
icu_data[5].virq_base, 0,
icu_data[6].reg_status = mmp_icu_base + 0x160;
icu_data[6].reg_mask = mmp_icu_base + 0x178;
icu_data[6].nr_irqs = 2;
+ icu_data[6].cascade_irq = 51;
icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
icu_data[6].virq_base, 0,
icu_data[7].reg_status = mmp_icu_base + 0x188;
icu_data[7].reg_mask = mmp_icu_base + 0x184;
icu_data[7].nr_irqs = 2;
+ icu_data[7].cascade_irq = 55;
icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
icu_data[7].virq_base, 0,
};
static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
- int reset_gpio;
+ int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
- .reset_gpio = 129,
+ .dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
};
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
- r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "DVI_LDO_EN");
- if (r)
- pr_err("%s: unable to configure DVI_LDO_EN\n",
- __func__);
+
+ beagle_config.dvi_pd_gpio = gpio + 2;
+
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+ dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
- if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].caps = beagle_config.mmc_caps;
omap_hsmmc_init(mmc);
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
+ if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+ omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
.release_resources = lis302_release,
.st_min_limits = {-32, 3, 3},
.st_max_limits = {-3, 32, 32},
- .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
};
#endif
{
I2C_BOARD_INFO("lis3lv02d", 0x1d),
.platform_data = &rx51_lis3lv02d_data,
- .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
},
#endif
};
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+ rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
+ rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
+#endif
omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
return 0;
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ if (soc_is_am35xx()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_AM35XX;
} else if (cpu_is_omap3630()) {
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
+ .clkdm_name = "prm_clkdm",
.rate = 32768,
.ops = &clkops_null,
};
.name = "ddrphy_ck",
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
+ .clkdm_name = "l3_emif_clkdm",
.fixed_div = 2,
.recalc = &omap_fixed_divisor_recalc,
};
static struct clk dpll_mpu_m2_ck = {
.name = "dpll_mpu_m2_ck",
.parent = &dpll_mpu_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
static struct clk l3_div_ck = {
.name = "l3_div_ck",
.parent = &div_core_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = l3_div_div,
.clksel_reg = OMAP4430_CM_CLKSEL_CORE,
.clksel_mask = OMAP4430_CLKSEL_L3_MASK,
static struct clk trace_clk_div_ck = {
.name = "trace_clk_div_ck",
.parent = &pmd_trace_clk_mux_ck,
+ .clkdm_name = "emu_sys_clkdm",
.clksel = trace_clk_div_div,
.clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
*/
#define MAX_MODULE_READY_TIME 2000
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3. In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME 5000
+
#endif
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
- MAX_MODULE_READY_TIME, i);
+ MAX_MODULE_DISABLE_TIME, i);
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
}
/**
#include <linux/module.h>
#include <linux/platform_device.h>
+
+#include <asm/memblock.h>
+
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
omap_features |= OMAP3_HAS_SDRC;
+ /*
+ * am35x fixups:
+ * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
+ * reserved and therefore return 0 when read. Unfortunately,
+ * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
+ * mean that a feature is present even though it isn't so clear
+ * the incorrectly set feature bits.
+ */
+ if (soc_is_am35xx())
+ omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
+
/*
* TODO: Get additional info (where applicable)
* e.g. Size of L2 cache.
ct->chip.irq_ack = omap_mask_ack_irq;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
ct->regs.enable = INTC_MIR_CLEAR0;
ct->regs.disable = INTC_MIR_SET0;
#include "control.h"
#include "mux.h"
#include "prm.h"
+#include "common.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
return -ENODEV;
}
-static int __init
-omap_mux_get_by_name(const char *muxname,
+int __init omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
*/
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
+int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux);
#else
+static inline int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux)
+{
+ return 0;
+}
+
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
- _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+ _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
.rev_offs = 0x0000,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO),
.sysc_fields = &omap_hwmod_sysc_type1,
};
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
+ /*
+ * HDMI audio requires to use no-idle mode. Hence,
+ * set idle mode by software.
+ */
+ .flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",
u8 multi = error & L3_ERROR_LOG_MULTI;
u32 address = omap3_l3_decode_addr(error_addr);
- WARN(true, "%s seen by %s %s at address %x\n",
+ pr_err("%s seen by %s %s at address %x\n",
omap3_l3_code_string(code),
omap3_l3_initiator_string(initid),
multi ? "Multiple Errors" : "", address);
+ WARN_ON(1);
return IRQ_HANDLED;
}
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
-#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
+ enable_irq(omap_prcm_event_to_irq("io"));
if (ret) {
pr_err("pm: Failed to request pm_io irq\n");
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
static int __init omap3xxx_prcm_init(void)
{
- if (cpu_is_omap34xx())
- return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- return 0;
+ int ret = 0;
+
+ if (cpu_is_omap34xx()) {
+ ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ if (!ret)
+ irq_set_status_flags(omap_prcm_event_to_irq("io"),
+ IRQ_NOAUTOEN);
+ }
+
+ return ret;
}
subsys_initcall(omap3xxx_prcm_init);
struct list_head node;
struct omap_hwmod *oh;
+ struct omap_device_pad default_omap_uart_pads[2];
};
static LIST_HEAD(uart_list);
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
+
+#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28
+static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
+ tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
+
+static void __init
+omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+ uart->default_omap_uart_pads[0].name = rx_pad_name;
+ uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
+ OMAP_DEVICE_PAD_WAKEUP;
+ uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
+ OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[1].name = tx_pad_name;
+ uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
+ OMAP_MUX_MODE0;
+ bdata->pads = uart->default_omap_uart_pads;
+ bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
+}
+
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
{
+ struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
+ struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
+ char *rx_fmt, *tx_fmt;
+ int uart_nr = bdata->id + 1;
+
+ if (bdata->id != 2) {
+ rx_fmt = "uart%d_rx.uart%d_rx";
+ tx_fmt = "uart%d_tx.uart%d_tx";
+ } else {
+ rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
+ tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
+ }
+
+ snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
+ uart_nr, uart_nr);
+ snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
+ uart_nr, uart_nr);
+
+ if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
+ omap_mux_get_by_name
+ (tx_pad_name, &tx_partition, &tx_mux) >= 0) {
+ u16 tx_mode, rx_mode;
+
+ tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
+ rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
+
+ /*
+ * Check if uart is used in default tx/rx mode i.e. in mux mode0
+ * if yes then configure rx pin for wake up capability
+ */
+ if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
+ omap_serial_fill_uart_tx_rx_pads(bdata, uart);
+ }
}
#else
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+}
#endif
static char *cmdline_find_option(char *str)
bdata.pads = NULL;
bdata.pads_cnt = 0;
- if (cpu_is_omap44xx() || cpu_is_omap34xx())
- omap_serial_fill_default_pads(&bdata);
+ omap_serial_check_wakeup(&bdata, uart);
if (!info)
omap_serial_init_port(&bdata, NULL);
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
.mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
.config = &musb_config,
printk(error, 3, status);
return status;
}
- tusb_resources[2].start = irq + IH_GPIO_BASE;
+ tusb_resources[2].start = gpio_to_irq(irq);
/* set up memory timings ... can speed them up later */
if (!ps_refclk) {
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
#endif
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#endif
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
* Debugging macro include header spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMA information for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* spear13xx machine family generic header file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* IRQ helper macros for spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* spear13xx Machine family specific definition
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1310 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1340 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr13XX machines common source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Debugging macro include header spear3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family generic header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* IRQ helper macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Miscellaneous registers definitions for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3xx Machine family specific definition
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr300 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machines common source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Miscellaneous registers definitions for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
static bool is_enabled;
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
{
void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
void __iomem *evp_cpu_reset =
udelay(1);
}
-/* This needs to be referenced by callbacks */
-struct pinctrl *u0_p;
-struct pinctrl_state *u0_def;
-struct pinctrl_state *u0_sleep;
-
-static void ux500_uart0_init(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_def))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_def);
- if (ret)
- pr_err("could not set UART0 defstate\n");
-}
-
-static void ux500_uart0_exit(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_sleep);
- if (ret)
- pr_err("could not set UART0 idlestate\n");
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .init = ux500_uart0_init,
- .exit = ux500_uart0_exit,
.reset = ux500_uart0_reset,
};
static void __init mop500_uart_init(struct device *parent)
{
- struct amba_device *uart0_device;
-
- uart0_device = db8500_add_uart0(parent, &uart0_plat);
- if (uart0_device) {
- u0_p = pinctrl_get(&uart0_device->dev);
- if (IS_ERR(u0_p))
- dev_err(&uart0_device->dev,
- "could not get UART0 pinctrl\n");
- else {
- u0_def = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(u0_def)) {
- dev_err(&uart0_device->dev,
- "could not get UART0 defstate\n");
- }
- u0_sleep = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_SLEEP);
- if (IS_ERR(u0_sleep))
- dev_err(&uart0_device->dev,
- "could not get UART0 idlestate\n");
- }
- }
+ db8500_add_uart0(parent, &uart0_plat);
db8500_add_uart1(parent, &uart1_plat);
db8500_add_uart2(parent, &uart2_plat);
}
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
.length = VERSATILE_PCI_CFG_BASE_SIZE,
.type = MT_DEVICE
- },
-#if 0
- {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
- .length = SZ_16M,
- .type = MT_DEVICE
}, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
- .length = SZ_16M,
- .type = MT_DEVICE
- }, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
- .length = SZ_16M,
+ .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+ .length = IO_SPACE_LIMIT,
.type = MT_DEVICE
},
#endif
-#endif
};
void __init versatile_map_io(void)
*/
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
+#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE
-/* macro to get at IO space when running virtually */
+/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
--- /dev/null
+/*
+ * arch/arm/mach-versatile/include/mach/io.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define PCIO_BASE 0xeb000000ul
+
+#define __io(a) ((a) + PCIO_BASE)
+
+#endif
.write = versatile_write_config,
};
+static struct resource io_port = {
+ .name = "PCI",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
static struct resource io_mem = {
.name = "PCI I/O space",
.start = VERSATILE_PCI_MEM_BASE0,
.end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct resource non_mem = {
"memory region (%d)\n", ret);
goto out;
}
+ ret = request_resource(&ioport_resource, &io_port);
+ if (ret) {
+ printk(KERN_ERR "PCI: unable to allocate I/O "
+ "port region (%d)\n", ret);
+ goto out;
+ }
ret = request_resource(&iomem_resource, &non_mem);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+ pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
if (nr == 0) {
sys->mem_offset = 0;
+ sys->io_offset = 0;
ret = pci_versatile_setup_resources(sys);
if (ret < 0) {
printk("pci_versatile_setup: resources... oops?\n");
#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
-unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
void __init init_consistent_dma_size(unsigned long size)
{
.vm_list = LIST_HEAD_INIT(coherent_head.vm_list),
};
-size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
static int __init early_coherent_pool(char *p)
{
return NULL;
while (count) {
- int j, order = __ffs(count);
+ int j, order = __fls(count);
pages[i] = alloc_pages(gfp | __GFP_NOWARN, order);
while (!pages[i] && order)
* allocations. This must be the smallest DMA mask in the system,
* so a successful GFP_DMA allocation will always satisfy this.
*/
-u32 arm_dma_limit;
+phys_addr_t arm_dma_limit;
static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
unsigned long dma_size)
#endif
#ifdef CONFIG_ZONE_DMA
-extern u32 arm_dma_limit;
+extern phys_addr_t arm_dma_limit;
#else
#define arm_dma_limit ((u32)~0)
#endif
update_on_xread(ctx);
emit(ARM_MOV_R(r_A, r_X), ctx);
break;
+ case BPF_S_ANC_ALU_XOR_X:
+ /* A ^= X */
+ update_on_xread(ctx);
+ emit(ARM_EOR_R(r_A, r_A, r_X), ctx);
+ break;
case BPF_S_ANC_PROTOCOL:
/* A = ntohs(skb->protocol) */
ctx->seen |= SEEN_SKB;
#define ARM_INST_CMP_R 0x01500000
#define ARM_INST_CMP_I 0x03500000
+#define ARM_INST_EOR_R 0x00200000
+
#define ARM_INST_LDRB_I 0x05d00000
#define ARM_INST_LDRB_R 0x07d00000
#define ARM_INST_LDRH_I 0x01d000b0
#define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm)
#define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm)
+#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm)
+
#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
| (off))
#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
return 0;
}
-void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init epit_timer_init(void __iomem *base, int irq)
{
+ struct clk *timer_clk;
+
+ timer_clk = clk_get_sys("imx-epit.0", NULL);
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX epit: unable to get clk\n");
+ return;
+ }
+
clk_prepare_enable(timer_clk);
timer_base = base;
extern void imx51_soc_init(void);
extern void imx53_soc_init(void);
extern void imx51_init_late(void);
-extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
-extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
extern int mx25_clocks_init(void);
#ifndef __MACH_MX2_CAM_H_
#define __MACH_MX2_CAM_H_
+#define MX2_CAMERA_SWAP16 (1 << 0)
#define MX2_CAMERA_EXT_VSYNC (1 << 1)
#define MX2_CAMERA_CCIR (1 << 2)
#define MX2_CAMERA_CCIR_INTERLACE (1 << 3)
#define MX2_CAMERA_GATED_CLOCK (1 << 5)
#define MX2_CAMERA_INV_DATA (1 << 6)
#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB (1 << 8)
/**
* struct mx2_camera_platform_data - optional platform data for mx2_camera
/* MX31, MX35, MX25, MX5 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_CLK_PER (2 << 6)
#define V2_TCTL_FRR (1 << 9)
#define V2_IR 0x0c
#define V2_TSTAT 0x08
return 0;
}
-void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init mxc_timer_init(void __iomem *base, int irq)
{
uint32_t tctl_val;
+ struct clk *timer_clk;
struct clk *timer_ipg_clk;
- if (!timer_clk) {
- timer_clk = clk_get_sys("imx-gpt.0", "per");
- if (IS_ERR(timer_clk)) {
- pr_err("i.MX timer: unable to get clk\n");
- return;
- }
-
- timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
- if (!IS_ERR(timer_ipg_clk))
- clk_prepare_enable(timer_ipg_clk);
+ timer_clk = clk_get_sys("imx-gpt.0", "per");
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
}
+ timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+ if (!IS_ERR(timer_ipg_clk))
+ clk_prepare_enable(timer_ipg_clk);
+
clk_prepare_enable(timer_clk);
timer_base = base;
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (timer_is_v2())
- tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
struct clk *c;
struct clk *pa;
+ mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate, c->usecount);
}
+ mutex_unlock(&clocks_mutex);
return 0;
}
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
- * cpu_is_omap3505(): True for OMAP3505
- * cpu_is_omap3517(): True for OMAP3517
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
#define cpu_is_omap730() 0
#define cpu_is_omap2422() 0
#define cpu_is_omap2423() 0
#define cpu_is_omap2430() 0
-#define cpu_is_omap3503() 0
-#define cpu_is_omap3515() 0
-#define cpu_is_omap3525() 0
-#define cpu_is_omap3530() 0
-#define cpu_is_omap3505() 0
-#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
-# define cpu_is_omap3503() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (!omap3_has_sgx()))
-# define cpu_is_omap3515() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (omap3_has_sgx()))
-# define cpu_is_omap3525() (cpu_is_omap3430() && \
- (!omap3_has_sgx()) && \
- (omap3_has_iva()))
-# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3517() is_omap3517()
-# define cpu_is_omap3505() (cpu_is_omap3517() && \
- !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP3517_CLASS 0x35170034
-#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
-
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
int is_closed);
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
-
#endif
extern int omap_msdi_reset(struct omap_hwmod *oh);
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
{ "pxa25x-nssp", PXA25x_NSSP },
{ "pxa27x-ssp", PXA27x_SSP },
{ "pxa168-ssp", PXA168_SSP },
+ { "pxa910-ssp", PXA910_SSP },
{ },
};
* Debugging macro include header for spear platform
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform shared irq layer header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform specific restart functions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform shared irq layer source file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#if defined(__H8300H__)
#define CPU "H8/300H"
char __initdata command_line[COMMAND_LINE_SIZE];
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
extern char _target_name[];
extern void h8300_gpio_init(void);
memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS;
#endif
- init_mm.start_code = (unsigned long) &_stext;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) 0;
#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
#ifdef DEBUG
- printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
- "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
- (int) &_sdata, (int) &_edata,
- (int) &_sbss, (int) &_ebss);
- printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
- "STACK=0x%06x-0x%06x\n",
- (int) &_ebss, (int) memory_start,
- (int) memory_start, (int) memory_end,
- (int) memory_end, (int) &_ramend);
+ printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
+ "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
+ __bss_stop);
+ printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
+ "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
+ memory_end, memory_end, &_ramend);
#endif
#ifdef CONFIG_DEFAULT_CMDLINE
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#undef DEBUG
int codek = 0, datak = 0, initk = 0;
/* DAVIDM look at setup memory map generically with reserved area */
unsigned long tmp;
- extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
extern unsigned long _ramend, _ramstart;
unsigned long len = &_ramend - &_ramstart;
unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
/* this will put all memory onto the freelists */
totalram_pages = free_all_bootmem();
- codek = (&_etext - &_stext) >> 10;
- datak = (&_ebss - &_sdata) >> 10;
- initk = (&__init_begin - &__init_end) >> 10;
+ codek = (_etext - _stext) >> 10;
+ datak = (__bss_stop - _sdata) >> 10;
+ initk = (__init_begin - __init_end) >> 10;
tmp = nr_free_pages() << PAGE_SHIFT;
printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n",
{
#ifdef CONFIG_RAMKERNEL
unsigned long addr;
- extern char __init_begin, __init_end;
/*
* the following code should be cool even if these sections
* are not page aligned.
*/
- addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+ addr = PAGE_ALIGN((unsigned long)(__init_begin));
/* next to check that the page we free is not a partial page */
- for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+ for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
free_page(addr);
totalram_pages++;
}
printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
- (addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
- (int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+ (addr - PAGE_ALIGN((long) __init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long)__init_begin)),
(int)(addr - PAGE_SIZE));
#endif
}
return MCF_CLK;
}
EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(devm_clk_get);
+
/***************************************************************************/
get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
}
+/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
+#define hard_irq_disable hard_irq_disable
+
/*
* This is called by asynchronous interrupts to conditionally
* re-enable hard interrupts when soft-disabled after having
return err;
}
-static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
{
+ struct kvm *kvm = vcpu->kvm;
void *va;
unsigned long nb;
+ unsigned long gpa;
- vpap->update_pending = 0;
- va = NULL;
- if (vpap->next_gpa) {
- va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
- if (nb < vpap->len) {
- /*
- * If it's now too short, it must be that userspace
- * has changed the mappings underlying guest memory,
- * so unregister the region.
- */
+ /*
+ * We need to pin the page pointed to by vpap->next_gpa,
+ * but we can't call kvmppc_pin_guest_page under the lock
+ * as it does get_user_pages() and down_read(). So we
+ * have to drop the lock, pin the page, then get the lock
+ * again and check that a new area didn't get registered
+ * in the meantime.
+ */
+ for (;;) {
+ gpa = vpap->next_gpa;
+ spin_unlock(&vcpu->arch.vpa_update_lock);
+ va = NULL;
+ nb = 0;
+ if (gpa)
+ va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
+ spin_lock(&vcpu->arch.vpa_update_lock);
+ if (gpa == vpap->next_gpa)
+ break;
+ /* sigh... unpin that one and try again */
+ if (va)
kvmppc_unpin_guest_page(kvm, va);
- va = NULL;
- }
+ }
+
+ vpap->update_pending = 0;
+ if (va && nb < vpap->len) {
+ /*
+ * If it's now too short, it must be that userspace
+ * has changed the mappings underlying guest memory,
+ * so unregister the region.
+ */
+ kvmppc_unpin_guest_page(kvm, va);
+ va = NULL;
}
if (vpap->pinned_addr)
kvmppc_unpin_guest_page(kvm, vpap->pinned_addr);
static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
{
- struct kvm *kvm = vcpu->kvm;
-
spin_lock(&vcpu->arch.vpa_update_lock);
if (vcpu->arch.vpa.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.vpa);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
}
if (vcpu->arch.dtl.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.dtl);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
vcpu->arch.dtl_index = 0;
}
if (vcpu->arch.slb_shadow.update_pending)
- kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
spin_unlock(&vcpu->arch.vpa_update_lock);
}
struct kvm_vcpu *vcpu, *vcpu0, *vnext;
long ret;
u64 now;
- int ptid, i;
+ int ptid, i, need_vpa_update;
/* don't start if any threads have a signal pending */
- list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ need_vpa_update = 0;
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
if (signal_pending(vcpu->arch.run_task))
return 0;
+ need_vpa_update |= vcpu->arch.vpa.update_pending |
+ vcpu->arch.slb_shadow.update_pending |
+ vcpu->arch.dtl.update_pending;
+ }
+
+ /*
+ * Initialize *vc, in particular vc->vcore_state, so we can
+ * drop the vcore lock if necessary.
+ */
+ vc->n_woken = 0;
+ vc->nap_count = 0;
+ vc->entry_exit_count = 0;
+ vc->vcore_state = VCORE_RUNNING;
+ vc->in_guest = 0;
+ vc->napping_threads = 0;
+
+ /*
+ * Updating any of the vpas requires calling kvmppc_pin_guest_page,
+ * which can't be called with any spinlocks held.
+ */
+ if (need_vpa_update) {
+ spin_unlock(&vc->lock);
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ kvmppc_update_vpas(vcpu);
+ spin_lock(&vc->lock);
+ }
/*
* Make sure we are running on thread 0, and that
if (vcpu->arch.ceded)
vcpu->arch.ptid = ptid++;
- vc->n_woken = 0;
- vc->nap_count = 0;
- vc->entry_exit_count = 0;
- vc->vcore_state = VCORE_RUNNING;
vc->stolen_tb += mftb() - vc->preempt_tb;
- vc->in_guest = 0;
vc->pcpu = smp_processor_id();
- vc->napping_threads = 0;
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
kvmppc_start_thread(vcpu);
- if (vcpu->arch.vpa.update_pending ||
- vcpu->arch.slb_shadow.update_pending ||
- vcpu->arch.dtl.update_pending)
- kvmppc_update_vpas(vcpu);
kvmppc_create_dtl_entry(vcpu, vc);
}
/* Grab any remaining hw threads so they can't go into the kernel */
};
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len);
+ enum kmsg_dump_reason reason);
static struct kmsg_dumper nvram_kmsg_dumper = {
.dump = oops_to_nvram
return 0;
}
-/*
- * Try to capture the last capture_len bytes of the printk buffer. Return
- * the amount actually captured.
- */
-static size_t capture_last_msgs(const char *old_msgs, size_t old_len,
- const char *new_msgs, size_t new_len,
- char *captured, size_t capture_len)
-{
- if (new_len >= capture_len) {
- memcpy(captured, new_msgs + (new_len - capture_len),
- capture_len);
- return capture_len;
- } else {
- /* Grab the end of old_msgs. */
- size_t old_tail_len = min(old_len, capture_len - new_len);
- memcpy(captured, old_msgs + (old_len - old_tail_len),
- old_tail_len);
- memcpy(captured + old_tail_len, new_msgs, new_len);
- return old_tail_len + new_len;
- }
-}
-
/*
* Are we using the ibm,rtas-log for oops/panic reports? And if so,
* would logging this oops/panic overwrite an RTAS event that rtas_errd
NVRAM_RTAS_READ_TIMEOUT);
}
-/* Squeeze out each line's <n> severity prefix. */
-static size_t elide_severities(char *buf, size_t len)
-{
- char *in, *out, *buf_end = buf + len;
- /* Assume a <n> at the very beginning marks the start of a line. */
- int newline = 1;
-
- in = out = buf;
- while (in < buf_end) {
- if (newline && in+3 <= buf_end &&
- *in == '<' && isdigit(in[1]) && in[2] == '>') {
- in += 3;
- newline = 0;
- } else {
- newline = (*in == '\n');
- *out++ = *in++;
- }
- }
- return out - buf;
-}
-
/* Derived from logfs_compress() */
static int nvram_compress(const void *in, void *out, size_t inlen,
size_t outlen)
* partition. If that's too much, go back and capture uncompressed text.
*/
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len)
+ enum kmsg_dump_reason reason)
{
static unsigned int oops_count = 0;
static bool panicking = false;
return;
if (big_oops_buf) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
- text_len = elide_severities(big_oops_buf, text_len);
+ kmsg_dump_get_buffer(dumper, false,
+ big_oops_buf, big_oops_buf_sz, &text_len);
rc = zip_oops(text_len);
}
if (rc != 0) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, oops_data, oops_data_sz);
+ kmsg_dump_rewind(dumper);
+ kmsg_dump_get_buffer(dumper, true,
+ oops_data, oops_data_sz, &text_len);
err_type = ERR_TYPE_KERNEL_PANIC;
*oops_len = (u16) text_len;
}
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = evtirq(0xa20),
- .end = evtirq(0xa20),
+ .start = evt2irq(0xa20),
+ .end = evt2irq(0xa20),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
clk->enable_bit = BITS_CKE;
- ret = sh_clk_mstp32_register(clk, 1);
+ ret = sh_clk_mstp_register(clk, 1);
if (unlikely(ret < 0))
goto err_phy;
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR);
+ ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR);
return ret;
}
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
&div4_table);
if (!ret)
- ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
return ret;
}
+++ /dev/null
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID 0x0000000000000010UL
-#define LP_ID_MAX 0x00000000003f0000UL
-#define LP_ID_ID 0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID 0x0000000000000000UL
-#define LP_INTR_ID_ID 0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID 0x0000000000000040UL
-#define CESR_ID_ID 0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL 0x0000000000000000UL
-#define LP_AVAIL_1 0x0000000000000002UL
-#define LP_AVAIL_0 0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT 0x0000000000000010UL
-#define LP_ENAB_STAT_1 0x0000000000000002UL
-#define LP_ENAB_STAT_0 0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB 0x0000000000000020UL
-#define LP_ENAB_1 0x0000000000000002UL
-#define LP_ENAB_0 0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW 0x0000000000000050UL
-#define LP_RUNNING_W1S 0x0000000000000060UL
-#define LP_RUNNING_W1C 0x0000000000000068UL
-#define LP_RUNNING_1 0x0000000000000002UL
-#define LP_RUNNING_0 0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT 0x0000000000000058UL
-#define LP_RUN_STAT_1 0x0000000000000002UL
-#define LP_RUN_STAT_0 0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER 0x0000000000000030UL
-#define LP_XIR_STEER_1 0x0000000000000002UL
-#define LP_XIR_STEER_0 0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER 0x0000000000000040UL
-#define CMT_ER_STEER_1 0x0000000000000002UL
-#define CMT_ER_STEER_0 0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */
+++ /dev/null
-/*
- * mpmbox.h: Interface and defines for the OpenProm mailbox
- * facilities for MP machines under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MPMBOX_H
-#define _SPARC_MPMBOX_H
-
-/* The prom allocates, for each CPU on the machine an unsigned
- * byte in physical ram. You probe the device tree prom nodes
- * for these values. The purpose of this byte is to be able to
- * pass messages from one cpu to another.
- */
-
-/* These are the main message types we have to look for in our
- * Cpu mailboxes, based upon these values we decide what course
- * of action to take.
- */
-
-/* The CPU is executing code in the kernel. */
-#define MAILBOX_ISRUNNING 0xf0
-
-/* Another CPU called romvec->pv_exit(), you should call
- * prom_stopcpu() when you see this in your mailbox.
- */
-#define MAILBOX_EXIT 0xfb
-
-/* Another CPU called romvec->pv_enter(), you should call
- * prom_cpuidle() when this is seen.
- */
-#define MAILBOX_GOSPIN 0xfc
-
-/* Another CPU has hit a breakpoint either into kadb or the prom
- * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
- * at this point.
- */
-#define MAILBOX_BPT_SPIN 0xfd
-
-/* Oh geese, some other nitwit got a damn watchdog reset. The party's
- * over so go call prom_stopcpu().
- */
-#define MAILBOX_WDOG_STOP 0xfe
-
-#ifndef __ASSEMBLY__
-
-/* Handy macro's to determine a cpu's state. */
-
-/* Is the cpu still in Power On Self Test? */
-#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f)
-
-/* Is the cpu at the 'ok' prompt of the PROM? */
-#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
-
-/* Is the cpu spinning in the PROM? */
-#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
-
-/* Sanity check... This is junk mail, throw it out. */
-#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
-
-/* Is the cpu actively running an application/kernel-code? */
-#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_MPMBOX_H) */
root_vdev = vio_create_one(hp, root, NULL);
err = -ENODEV;
if (!root_vdev) {
- printk(KERN_ERR "VIO: Coult not create root device.\n");
+ printk(KERN_ERR "VIO: Could not create root device.\n");
goto out_release;
}
#ifdef __tilegx__
#define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
#define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
-#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret)
#define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
#else
#define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)
* they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
* operations.
*
- * Without THP if the mmap_sem is hold for reading, the
- * pmd can only transition from null to not null while pmd_read_atomic runs.
- * So there's no need of literally reading it atomically.
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
*
* With THP if the mmap_sem is hold for reading, the pmd can become
- * THP or null or point to a pte (and in turn become "stable") at any
- * time under pmd_read_atomic, so it's mandatory to read it atomically
- * with cmpxchg8b.
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
*/
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
{
pmdval_t ret;
return (pmd_t) { ret };
}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
-{
- return (pmd_t) { atomic64_read((atomic64_t *)pmdp) };
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
{
struct dma_attrs *attrs)
{
unsigned long dma_mask;
- struct page *page = NULL;
+ struct page *page;
unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
dma_addr_t addr;
flag |= __GFP_ZERO;
again:
+ page = NULL;
if (!(flag & GFP_ATOMIC))
page = dma_alloc_from_contiguous(dev, count, get_order(size));
if (!page)
static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
{
- if (c->phys_proc_id == o->phys_proc_id)
- return topology_sane(c, o, "mc");
+ if (c->phys_proc_id == o->phys_proc_id) {
+ if (cpu_has(c, X86_FEATURE_AMD_DCM))
+ return true;
+ return topology_sane(c, o, "mc");
+ }
return false;
}
void *map;
int ret;
- if (__range_not_ok(from, n, TASK_SIZE) == 0)
+ if (__range_not_ok(from, n, TASK_SIZE))
return len;
do {
/**
* ioremap_nocache - map bus memory into CPU space
- * @offset: bus address of the memory
+ * @phys_addr: bus address of the memory
* @size: size of the resource to map
*
* ioremap_nocache performs a platform specific sequence of operations to
/**
* ioremap_wc - map memory into CPU space write combined
- * @offset: bus address of the memory
+ * @phys_addr: bus address of the memory
* @size: size of the resource to map
*
* This version of ioremap ensures that the memory is marked write combining.
/**
* clflush_cache_range - flush a cache range with clflush
- * @addr: virtual start address
+ * @vaddr: virtual start address
* @size: number of bytes to flush
*
* clflush is an unordered instruction which needs fencing with mfence
static int dumper_registered;
static void dw_kmsg_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- int i;
+ static char line[1024];
+ size_t len;
/* When run to this, we'd better re-init the HW */
mrst_early_console_init();
- for (i = 0; i < l1; i++)
- early_mrst_console.write(&early_mrst_console, s1 + i, 1);
- for (i = 0; i < l2; i++)
- early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+ while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+ early_mrst_console.write(&early_mrst_console, line, len);
}
/* Set the ratio rate to 115200, 8n1, IRQ disabled */
#undef __SYSCALL_I386
#define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym,
-typedef void (*sys_call_ptr_t)(void);
+typedef asmlinkage void (*sys_call_ptr_t)(void);
-extern void sys_ni_syscall(void);
+extern asmlinkage void sys_ni_syscall(void);
const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
/*
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
}
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
*dx = cpuid_leaf5_edx_val;
return;
+ case CPUID_THERM_POWER_LEAF:
+ /* Disabling APERFMPERF for kernel usage */
+ maskecx = ~(1 << APERFMPERF_PRESENT);
+ break;
+
case 0xb:
/* Suppress extended topology stuff */
maskebx = 0;
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
+ int ret = 0;
pfn = page_to_pfn(page);
if (!PageHighMem(page)) {
list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]);
spin_unlock_irqrestore(&m2p_override_lock, flags);
+ /* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in
+ * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other
+ * pfn so that the following mfn_to_pfn(mfn) calls will return the
+ * pfn from the m2p_override (the backend pfn) instead.
+ * We need to do this because the pages shared by the frontend
+ * (xen-blkfront) can be already locked (lock_page, called by
+ * do_read_cache_page); when the userspace backend tries to use them
+ * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
+ * do_blockdev_direct_IO is going to try to lock the same pages
+ * again resulting in a deadlock.
+ * As a side effect get_user_pages_fast might not be safe on the
+ * frontend pages while they are being shared with the backend,
+ * because mfn_to_pfn (that ends up being called by GUPF) will
+ * return the backend pfn rather than the frontend pfn. */
+ ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+ if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+ set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
+
return 0;
}
EXPORT_SYMBOL_GPL(m2p_add_override);
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
+ int ret = 0;
pfn = page_to_pfn(page);
mfn = get_phys_to_machine(pfn);
} else
set_phys_to_machine(pfn, page->index);
+ /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present
+ * somewhere in this domain, even before being added to the
+ * m2p_override (see comment above in m2p_add_override).
+ * If there are no other entries in the m2p_override corresponding
+ * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for
+ * the original pfn (the one shared by the frontend): the backend
+ * cannot do any IO on this page anymore because it has been
+ * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of
+ * the original pfn causes mfn_to_pfn(mfn) to return the frontend
+ * pfn again. */
+ mfn &= ~FOREIGN_FRAME_BIT;
+ ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+ if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+ m2p_find_override(mfn) == NULL)
+ set_phys_to_machine(pfn, mfn);
+
return 0;
}
EXPORT_SYMBOL_GPL(m2p_remove_override);
populated = xen_populate_chunk(map, memmap.nr_entries,
max_pfn, &last_pfn, xen_released_pages);
- extra_pages += (xen_released_pages - populated);
+ xen_released_pages -= populated;
+ extra_pages += xen_released_pages;
if (last_pfn > max_pfn) {
max_pfn = min(MAX_DOMAIN_PAGES, last_pfn);
# Only build variant and/or platform if it includes a Makefile
-buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
-buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
+buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
+buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
# Find libgcc.a
_text = .;
_stext = .;
- _ftext = .;
.text :
{
EXCEPTION_TABLE(16)
/* Data section */
- _fdata = .;
+ _sdata = .;
RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
_edata = .;
#include <asm/bootparam.h>
#include <asm/page.h>
-
-/* References to section boundaries */
-
-extern char _ftext, _etext, _fdata, _edata, _rodata_end;
-extern char __init_begin, __init_end;
+#include <asm/sections.h>
/*
* mem_reserve(start, end, must_exist)
reservedpages++;
}
- codesize = (unsigned long) &_etext - (unsigned long) &_ftext;
- datasize = (unsigned long) &_edata - (unsigned long) &_fdata;
- initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+ codesize = (unsigned long) _etext - (unsigned long) _stext;
+ datasize = (unsigned long) _edata - (unsigned long) _sdata;
+ initsize = (unsigned long) __init_end - (unsigned long) __init_begin;
printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
"%ldk data, %ldk init %ldk highmem)\n",
void free_initmem(void)
{
- free_reserved_mem(&__init_begin, &__init_end);
- printk("Freeing unused kernel memory: %dk freed\n",
- (&__init_end - &__init_begin) >> 10);
+ free_reserved_mem(__init_begin, __init_end);
+ printk("Freeing unused kernel memory: %zuk freed\n",
+ (__init_end - __init_begin) >> 10);
}
* Arasan Compact Flash host controller source file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
module_platform_driver(arasan_cf_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
mutex_lock(&deferred_probe_mutex);
if (list_empty(&dev->p->deferred_probe)) {
dev_dbg(dev, "Added to deferred list\n");
- list_add(&dev->p->deferred_probe, &deferred_probe_pending_list);
+ list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
}
mutex_unlock(&deferred_probe_mutex);
}
u32 *data = buf;
/* data ready? */
- if (readl(trng->base + TRNG_ODATA) & 1) {
+ if (readl(trng->base + TRNG_ISR) & 1) {
*data = readl(trng->base + TRNG_ODATA);
/*
ensure data ready is only set again AFTER the next data
{
struct clk *child;
unsigned long old_rate;
+ unsigned long best_parent_rate = 0;
struct hlist_node *tmp;
old_rate = clk->rate;
+ if (clk->parent)
+ best_parent_rate = clk->parent->rate;
+
if (clk->ops->set_rate)
- clk->ops->set_rate(clk->hw, clk->new_rate, clk->parent->rate);
+ clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
if (clk->ops->recalc_rate)
- clk->rate = clk->ops->recalc_rate(clk->hw,
- clk->parent->rate);
+ clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate);
else
- clk->rate = clk->parent->rate;
+ clk->rate = best_parent_rate;
if (clk->notifier_count && old_rate != clk->rate)
__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
if (!clk->parents)
clk->parents =
- kmalloc((sizeof(struct clk*) * clk->num_parents),
+ kzalloc((sizeof(struct clk*) * clk->num_parents),
GFP_KERNEL);
if (!clk->parents)
old_parent = clk->parent;
/* find index of new parent clock using cached parent ptrs */
- for (i = 0; i < clk->num_parents; i++)
- if (clk->parents[i] == parent)
- break;
+ if (clk->parents)
+ for (i = 0; i < clk->num_parents; i++)
+ if (clk->parents[i] == parent)
+ break;
+ else
+ clk->parents = kzalloc((sizeof(struct clk*) * clk->num_parents),
+ GFP_KERNEL);
/*
* find index of new parent clock using string name comparison
if (i == clk->num_parents)
for (i = 0; i < clk->num_parents; i++)
if (!strcmp(clk->parent_names[i], parent->name)) {
- clk->parents[i] = __clk_lookup(parent->name);
+ if (clk->parents)
+ clk->parents[i] = __clk_lookup(parent->name);
break;
}
__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
}
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
{ .dev_id = "duart", },
{ .dev_id = "mxs-auart.0", },
{ .dev_id = "mxs-auart.1", },
{ .dev_id = "80070000.serial", },
};
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
{ .dev_id = "imx23-dma-apbh", },
{ .dev_id = "80004000.dma-apbh", },
};
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
{ .dev_id = "80070000.serial", .con_id = "apb_pclk"},
{ .dev_id = "imx23-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
-static struct clk_lookup ssp_lookups[] __initdata = {
+static struct clk_lookup ssp_lookups[] = {
{ .dev_id = "imx23-mmc.0", },
{ .dev_id = "imx23-mmc.1", },
{ .dev_id = "80010000.ssp", },
{ .dev_id = "80034000.ssp", },
};
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
{ .dev_id = "imx23-fb", },
{ .dev_id = "80030000.lcdif", },
};
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx23-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
};
writel_relaxed(val, FRAC0);
}
-static struct clk_lookup uart_lookups[] __initdata = {
+static struct clk_lookup uart_lookups[] = {
{ .dev_id = "duart", },
{ .dev_id = "mxs-auart.0", },
{ .dev_id = "mxs-auart.1", },
{ .dev_id = "80074000.serial", },
};
-static struct clk_lookup hbus_lookups[] __initdata = {
+static struct clk_lookup hbus_lookups[] = {
{ .dev_id = "imx28-dma-apbh", },
{ .dev_id = "80004000.dma-apbh", },
};
-static struct clk_lookup xbus_lookups[] __initdata = {
+static struct clk_lookup xbus_lookups[] = {
{ .dev_id = "duart", .con_id = "apb_pclk"},
{ .dev_id = "80074000.serial", .con_id = "apb_pclk"},
{ .dev_id = "imx28-dma-apbx", },
{ .dev_id = "80024000.dma-apbx", },
};
-static struct clk_lookup ssp0_lookups[] __initdata = {
+static struct clk_lookup ssp0_lookups[] = {
{ .dev_id = "imx28-mmc.0", },
{ .dev_id = "80010000.ssp", },
};
-static struct clk_lookup ssp1_lookups[] __initdata = {
+static struct clk_lookup ssp1_lookups[] = {
{ .dev_id = "imx28-mmc.1", },
{ .dev_id = "80012000.ssp", },
};
-static struct clk_lookup ssp2_lookups[] __initdata = {
+static struct clk_lookup ssp2_lookups[] = {
{ .dev_id = "imx28-mmc.2", },
{ .dev_id = "80014000.ssp", },
};
-static struct clk_lookup ssp3_lookups[] __initdata = {
+static struct clk_lookup ssp3_lookups[] = {
{ .dev_id = "imx28-mmc.3", },
{ .dev_id = "80016000.ssp", },
};
-static struct clk_lookup lcdif_lookups[] __initdata = {
+static struct clk_lookup lcdif_lookups[] = {
{ .dev_id = "imx28-fb", },
{ .dev_id = "80030000.lcdif", },
};
-static struct clk_lookup gpmi_lookups[] __initdata = {
+static struct clk_lookup gpmi_lookups[] = {
{ .dev_id = "imx28-gpmi-nand", },
{ .dev_id = "8000c000.gpmi", },
};
-static struct clk_lookup fec_lookups[] __initdata = {
+static struct clk_lookup fec_lookups[] = {
{ .dev_id = "imx28-fec.0", },
{ .dev_id = "imx28-fec.1", },
{ .dev_id = "800f0000.ethernet", },
{ .dev_id = "800f4000.ethernet", },
};
-static struct clk_lookup can0_lookups[] __initdata = {
+static struct clk_lookup can0_lookups[] = {
{ .dev_id = "flexcan.0", },
{ .dev_id = "80032000.can", },
};
-static struct clk_lookup can1_lookups[] __initdata = {
+static struct clk_lookup can1_lookups[] = {
{ .dev_id = "flexcan.1", },
{ .dev_id = "80034000.can", },
};
-static struct clk_lookup saif0_lookups[] __initdata = {
+static struct clk_lookup saif0_lookups[] = {
{ .dev_id = "mxs-saif.0", },
{ .dev_id = "80042000.saif", },
};
-static struct clk_lookup saif1_lookups[] __initdata = {
+static struct clk_lookup saif1_lookups[] = {
{ .dev_id = "mxs-saif.1", },
{ .dev_id = "80046000.saif", },
};
clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000);
clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0);
clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1);
- clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2);
- clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3);
+ clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 2);
+ clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 3);
clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0);
clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1);
clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2);
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Clock framework definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1310 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1340 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr6xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
clk = clk_register_gate(NULL, "gmac_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
GMAC_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, NULL, "gmac");
+ clk_register_clkdev(clk, NULL, "e0800000.ethernet");
clk = clk_register_gate(NULL, "i2c_clk", "ahb_clk", 0, PERIP1_CLK_ENB,
I2C_CLK_ENB, 0, &_lock);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
init_completion(&sdmac->done);
- sdmac->buf_tail = 0;
-
return 0;
out:
sdmac->flags = 0;
+ sdmac->buf_tail = 0;
+
dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
sg_len, channel);
sdmac->status = DMA_IN_PROGRESS;
+ sdmac->buf_tail = 0;
+
sdmac->flags |= IMX_DMA_SG_LOOP;
sdmac->direction = direction;
ret = sdma_load_context(sdmac);
struct pl330_reqcfg *cfg;
/* Pointer to first xfer in the request. */
struct pl330_xfer *x;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
};
/*
/* Number of bytes taken to setup MC for the req */
u32 mc_len;
struct pl330_req *r;
- /* Hook to attach to DMAC's list of reqs with due callback */
- struct list_head rqd;
};
/* ToBeDone for tasklet */
/* Returns 1 if state was updated, 0 otherwise */
static int pl330_update(const struct pl330_info *pi)
{
- struct _pl330_req *rqdone;
+ struct pl330_req *rqdone, *tmp;
struct pl330_dmac *pl330;
unsigned long flags;
void __iomem *regs;
if (active == -1) /* Aborted */
continue;
- rqdone = &thrd->req[active];
+ /* Detach the req */
+ rqdone = thrd->req[active].r;
+ thrd->req[active].r = NULL;
+
mark_free(thrd, active);
/* Get going again ASAP */
}
/* Now that we are in no hurry, do the callbacks */
- while (!list_empty(&pl330->req_done)) {
- struct pl330_req *r;
-
- rqdone = container_of(pl330->req_done.next,
- struct _pl330_req, rqd);
-
- list_del_init(&rqdone->rqd);
-
- /* Detach the req */
- r = rqdone->r;
- rqdone->r = NULL;
+ list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
+ list_del(&rqdone->rqd);
spin_unlock_irqrestore(&pl330->lock, flags);
- _callback(r, PL330_ERR_NONE);
+ _callback(rqdone, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
/* Pick up ripe tomatoes */
list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
if (desc->status == DONE) {
- if (pch->cyclic)
+ if (!pch->cyclic)
dma_cookie_complete(&desc->txd);
list_move_tail(&desc->node, &list);
}
}
/* Returns the number of descriptors added to the DMAC pool */
-int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
+static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
{
struct dma_pl330_desc *desc;
unsigned long flags;
else
return (char *)ptr;
- r = size % align;
+ r = (unsigned long)p % align;
if (r == 0)
return (char *)ptr;
if (mce->bank != 8)
return NOTIFY_DONE;
-#ifdef CONFIG_SMP
- /* Only handle if it is the right mc controller */
- if (mce->socketid != pvt->i7core_dev->socket)
- return NOTIFY_DONE;
-#endif
-
smp_rmb();
if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
smp_wmb();
if (pvt->enable_scrub)
disable_sdram_scrub_setting(mci);
- mce_unregister_decode_chain(&i7_mce_dec);
-
/* Disable EDAC polling */
i7core_pci_ctl_release(pvt);
/* DCLK for scrub rate setting */
pvt->dclk_freq = get_dclk_freq();
- mce_register_decode_chain(&i7_mce_dec);
-
return 0;
fail0:
pci_rc = pci_register_driver(&i7core_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ mce_register_decode_chain(&i7_mce_dec);
return 0;
+ }
i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&i7core_driver);
+ mce_unregister_decode_chain(&i7_mce_dec);
}
module_init(i7core_init);
layers[1].type = EDAC_MC_LAYER_CHANNEL;
layers[1].size = 1;
layers[1].is_virt_csrow = false;
- mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), sizeof(*pdata));
+ mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
+ sizeof(*pdata));
if (!mci) {
devres_release_group(&op->dev, mpc85xx_mc_err_probe);
return -ENOMEM;
pvt->is_close_pg = false;
}
- pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, ®);
+ pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, ®);
if (IS_RDIMM_ENABLED(reg)) {
/* FIXME: Can also be LRDIMM */
debugf0("Memory is registered\n");
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &sbridge_dev->pdev[0]->dev);
- mce_unregister_decode_chain(&sbridge_mce_dec);
-
/* Remove MC sysfs nodes */
edac_mc_del_mc(mci->dev);
goto fail0;
}
- mce_register_decode_chain(&sbridge_mce_dec);
return 0;
fail0:
pci_rc = pci_register_driver(&sbridge_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ mce_register_decode_chain(&sbridge_mce_dec);
return 0;
+ }
sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&sbridge_driver);
+ mce_unregister_decode_chain(&sbridge_mce_dec);
}
module_init(sbridge_init);
[5] = "Charge-downstream",
[6] = "MHL",
[7] = "Dock-desk",
- [7] = "Dock-card",
- [8] = "JIG",
+ [8] = "Dock-card",
+ [9] = "JIG",
NULL,
};
extcon_dev_unregister(info->edev);
+ kfree(info->edev);
kfree(info);
return 0;
#if defined(CONFIG_ANDROID)
if (switch_class)
ret = class_compat_create_link(switch_class, edev->dev,
- dev);
+ NULL);
#endif /* CONFIG_ANDROID */
spin_lock_init(&edev->lock);
if (ret < 0)
goto err_request_irq;
+ platform_set_drvdata(pdev, extcon_data);
/* Perform initial detection */
gpio_extcon_work(&extcon_data->work.work);
struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&extcon_data->work);
+ free_irq(extcon_data->irq, extcon_data);
gpio_free(extcon_data->gpio);
extcon_dev_unregister(&extcon_data->edev);
devm_kfree(&pdev->dev, extcon_data);
drm_monitor_supports_rb(struct edid *edid)
{
if (edid->revision >= 4) {
- bool ret;
+ bool ret = false;
drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
return ret;
}
*/
spin_lock_irqsave(&dev_priv->rps_lock, flags);
- WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
dev_priv->pm_iir |= pm_iir;
I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
POSTING_READ(GEN6_PMIMR);
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
- I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+ /* NOTE: BLC_PWM_CPU_CTL must be written after BLC_PWM_CPU_CTL2;
+ * otherwise we get blank eDP screen after S3 on some machines
+ */
I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+ I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
if (I915_READ(HDMIC) & PORT_DETECTED)
intel_hdmi_init(dev, HDMIC);
- if (I915_READ(HDMID) & PORT_DETECTED)
+ if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
intel_hdmi_init(dev, HDMID);
if (I915_READ(PCH_DP_C) & DP_DETECTED)
POSTING_READ(vga_reg);
}
-static void ivb_pch_pwm_override(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- /*
- * IVB has CPU eDP backlight regs too, set things up to let the
- * PCH regs control the backlight
- */
- I915_WRITE(BLC_PWM_CPU_CTL2, PWM_ENABLE);
- I915_WRITE(BLC_PWM_CPU_CTL, 0);
- I915_WRITE(BLC_PWM_PCH_CTL1, PWM_ENABLE | (1<<30));
-}
-
void intel_modeset_init_hw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
gen6_enable_rps(dev_priv);
gen6_update_ring_freq(dev_priv);
}
-
- if (IS_IVYBRIDGE(dev))
- ivb_pch_pwm_override(dev);
}
void intel_modeset_init(struct drm_device *dev)
#include "drm.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
struct drm_display_mode *panel_fixed_mode; /* for eDP */
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
+ struct edid *edid; /* cached EDID for eDP */
+ int edid_mode_count;
};
/**
int recv_bytes;
uint32_t status;
uint32_t aux_clock_divider;
- int try, precharge = 5;
+ int try, precharge;
intel_dp_check_edp(intel_dp);
/* The clock divider is based off the hrawclk,
else
aux_clock_divider = intel_hrawclk(dev) / 2;
+ if (IS_GEN6(dev))
+ precharge = 3;
+ else
+ precharge = 5;
+
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
status = I915_READ(ch_ctl);
if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
return;
+ ironlake_edp_panel_vdd_on(intel_dp);
+
if (intel_dp_aux_native_read_retry(intel_dp, DP_SINK_OUI, buf, 3))
DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
if (intel_dp_aux_native_read_retry(intel_dp, DP_BRANCH_OUI, buf, 3))
DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
+
+ ironlake_edp_panel_vdd_off(intel_dp, false);
}
static bool
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct edid *edid;
+ int size;
+
+ if (is_edp(intel_dp)) {
+ if (!intel_dp->edid)
+ return NULL;
+
+ size = (intel_dp->edid->extensions + 1) * EDID_LENGTH;
+ edid = kmalloc(size, GFP_KERNEL);
+ if (!edid)
+ return NULL;
+
+ memcpy(edid, intel_dp->edid, size);
+ return edid;
+ }
- ironlake_edp_panel_vdd_on(intel_dp);
edid = drm_get_edid(connector, adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return edid;
}
struct intel_dp *intel_dp = intel_attached_dp(connector);
int ret;
- ironlake_edp_panel_vdd_on(intel_dp);
+ if (is_edp(intel_dp)) {
+ drm_mode_connector_update_edid_property(connector,
+ intel_dp->edid);
+ ret = drm_add_edid_modes(connector, intel_dp->edid);
+ drm_edid_to_eld(connector,
+ intel_dp->edid);
+ connector->display_info.raw_edid = NULL;
+ return intel_dp->edid_mode_count;
+ }
+
ret = intel_ddc_get_modes(connector, adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return ret;
}
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
+ kfree(intel_dp->edid);
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
ironlake_panel_vdd_off_sync(intel_dp);
}
break;
}
+ intel_dp_i2c_init(intel_dp, intel_connector, name);
+
/* Cache some DPCD data in the eDP case */
if (is_edp(intel_dp)) {
bool ret;
struct edp_power_seq cur, vbt;
u32 pp_on, pp_off, pp_div;
+ struct edid *edid;
pp_on = I915_READ(PCH_PP_ON_DELAYS);
pp_off = I915_READ(PCH_PP_OFF_DELAYS);
intel_dp_destroy(&intel_connector->base);
return;
}
- }
- intel_dp_i2c_init(intel_dp, intel_connector, name);
+ ironlake_edp_panel_vdd_on(intel_dp);
+ edid = drm_get_edid(connector, &intel_dp->adapter);
+ if (edid) {
+ drm_mode_connector_update_edid_property(connector,
+ edid);
+ intel_dp->edid_mode_count =
+ drm_add_edid_modes(connector, edid);
+ drm_edid_to_eld(connector, edid);
+ intel_dp->edid = edid;
+ }
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ }
intel_encoder->hot_plug = intel_dp_hot_plug;
nfbdev->helper.funcs = &nouveau_fbcon_helper_funcs;
ret = drm_fb_helper_init(dev, &nfbdev->helper,
- nv_two_heads(dev) ? 2 : 1, 4);
+ dev->mode_config.num_crtc, 4);
if (ret) {
kfree(nfbdev);
return ret;
+/*
+ * Copyright 2011 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ */
#include "drmP.h"
#include "drm.h"
}
if (tiling_flags & RADEON_TILING_MACRO) {
- if (rdev->family >= CHIP_CAYMAN)
+ if (rdev->family >= CHIP_TAHITI)
+ tmp = rdev->config.si.tile_config;
+ else if (rdev->family >= CHIP_CAYMAN)
tmp = rdev->config.cayman.tile_config;
else
tmp = rdev->config.evergreen.tile_config;
} else if (tiling_flags & RADEON_TILING_MICRO)
fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
+ if ((rdev->family == CHIP_TAHITI) ||
+ (rdev->family == CHIP_PITCAIRN))
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
+ else if (rdev->family == CHIP_VERDE)
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P4_8x16);
+
switch (radeon_crtc->crtc_id) {
case 0:
WREG32(AVIVO_D1VGA_CONTROL, 0);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
r600_hdmi_enable(encoder);
- if (ASIC_IS_DCE4(rdev))
+ if (ASIC_IS_DCE6(rdev))
+ ; /* TODO (use pointers instead of if-s?) */
+ else if (ASIC_IS_DCE4(rdev))
evergreen_hdmi_setmode(encoder, adjusted_mode);
else
r600_hdmi_setmode(encoder, adjusted_mode);
smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
WREG32(SMX_DC_CTL0, smx_dc_ctl0);
+ if (rdev->family <= CHIP_SUMO2)
+ WREG32(SMX_SAR_CTL0, 0x00010000);
+
WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
- return;
-
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
+#define SMX_SAR_CTL0 0xA008
#define SMX_DC_CTL0 0xA020
#define USE_HASH_FUNCTION (1 << 0)
#define NUMBER_OF_SETS(x) ((x) << 1)
if (r)
return r;
+ r = r600_audio_init(rdev);
+ if (r)
+ return r;
+
return 0;
}
int cayman_suspend(struct radeon_device *rdev)
{
+ r600_audio_fini(rdev);
/* FIXME: we should wait for ring to be empty */
radeon_ib_pool_suspend(rdev);
radeon_vm_manager_suspend(rdev);
WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
NUM_CLIP_SEQ(3)));
WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095));
+ WREG32(VC_ENHANCE, 0);
}
*/
static int r600_audio_chipset_supported(struct radeon_device *rdev)
{
- return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE5(rdev))
+ return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE6(rdev))
|| rdev->family == CHIP_RS600
|| rdev->family == CHIP_RS690
|| rdev->family == CHIP_RS740;
return -EINVAL;
}
break;
+ case PACKET3_STRMOUT_BASE_UPDATE:
+ if (p->family < CHIP_RV770) {
+ DRM_ERROR("STRMOUT_BASE_UPDATE only supported on 7xx\n");
+ return -EINVAL;
+ }
+ if (pkt->count != 1) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE packet count\n");
+ return -EINVAL;
+ }
+ if (idx_value > 3) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE index\n");
+ return -EINVAL;
+ }
+ {
+ u64 offset;
+
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE reloc\n");
+ return -EINVAL;
+ }
+
+ if (reloc->robj != track->vgt_strmout_bo[idx_value]) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo does not match\n");
+ return -EINVAL;
+ }
+
+ offset = radeon_get_ib_value(p, idx+1) << 8;
+ if (offset != track->vgt_strmout_bo_offset[idx_value]) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo offset does not match: 0x%llx, 0x%x\n",
+ offset, track->vgt_strmout_bo_offset[idx_value]);
+ return -EINVAL;
+ }
+
+ if ((offset + 4) > radeon_bo_size(reloc->robj)) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE bo too small: 0x%llx, 0x%lx\n",
+ offset + 4, radeon_bo_size(reloc->robj));
+ return -EINVAL;
+ }
+ ib[idx+1] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ }
+ break;
case PACKET3_SURFACE_BASE_UPDATE:
if (p->family >= CHIP_RV770 || p->family == CHIP_R600) {
DRM_ERROR("bad SURFACE_BASE_UPDATE\n");
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
- return;
-
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
uint32_t offset;
u32 hdmi;
- if (ASIC_IS_DCE5(rdev))
+ if (ASIC_IS_DCE6(rdev))
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
+ if (ASIC_IS_DCE6(rdev))
return;
/* Called for ATOM_ENCODER_MODE_HDMI only */
#define TC_L2_SIZE(x) ((x)<<5)
#define L2_DISABLE_LATE_HIT (1<<9)
+#define VC_ENHANCE 0x9714
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x)<<0)
#define PACKET3_SET_CTL_CONST 0x6F
#define PACKET3_SET_CTL_CONST_OFFSET 0x0003cff0
#define PACKET3_SET_CTL_CONST_END 0x0003e200
+#define PACKET3_STRMOUT_BASE_UPDATE 0x72 /* r7xx */
#define PACKET3_SURFACE_BASE_UPDATE 0x73
* 2.14.0 - add evergreen tiling informations
* 2.15.0 - add max_pipes query
* 2.16.0 - fix evergreen 2D tiled surface calculation
+ * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 16
+#define KMS_DRIVER_MINOR 17
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
int i;
for (i = 0; i < RADEON_NUM_RINGS; ++i) {
- not_processed += radeon_fence_count_emitted(rdev, i);
- if (not_processed >= 3)
- break;
+ struct radeon_ring *ring = &rdev->ring[i];
+
+ if (ring->ready) {
+ not_processed += radeon_fence_count_emitted(rdev, i);
+ if (not_processed >= 3)
+ break;
+ }
}
if (not_processed >= 3) { /* should upclock */
struct radeon_bo *bo = gem_to_radeon_bo(obj);
int ret = 0;
+ ret = radeon_bo_reserve(bo, false);
+ if (unlikely(ret != 0))
+ return ERR_PTR(ret);
+
/* pin buffer into GTT */
ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL);
- if (ret)
+ if (ret) {
+ radeon_bo_unreserve(bo);
return ERR_PTR(ret);
-
+ }
+ radeon_bo_unreserve(bo);
return dma_buf_export(bo, &radeon_dmabuf_ops, obj->size, flags);
}
ACK_FLUSH_CTL(3) |
SYNC_FLUSH_CTL));
+ if (rdev->family != CHIP_RV770)
+ WREG32(SMX_SAR_CTL0, 0x00003f3f);
+
db_debug3 = RREG32(DB_DEBUG3);
db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f);
switch (rdev->family) {
WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
NUM_CLIP_SEQ(3)));
-
+ WREG32(VC_ENHANCE, 0);
}
void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
+#define SMX_SAR_CTL0 0xA008
#define SMX_DC_CTL0 0xA020
#define USE_HASH_FUNCTION (1 << 0)
#define CACHE_DEPTH(x) ((x) << 1)
#define TCP_CNTL 0x9610
#define TCP_CHAN_STEER 0x9614
+#define VC_ENHANCE 0x9714
+
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x)<<0)
#define VC_ONLY 0
#define SI_DC_GPIO_HPD_EN 0x65b8
#define SI_DC_GPIO_HPD_Y 0x65bc
+#define SI_GRPH_CONTROL 0x6804
+# define SI_GRPH_DEPTH(x) (((x) & 0x3) << 0)
+# define SI_GRPH_DEPTH_8BPP 0
+# define SI_GRPH_DEPTH_16BPP 1
+# define SI_GRPH_DEPTH_32BPP 2
+# define SI_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2)
+# define SI_ADDR_SURF_2_BANK 0
+# define SI_ADDR_SURF_4_BANK 1
+# define SI_ADDR_SURF_8_BANK 2
+# define SI_ADDR_SURF_16_BANK 3
+# define SI_GRPH_Z(x) (((x) & 0x3) << 4)
+# define SI_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6)
+# define SI_ADDR_SURF_BANK_WIDTH_1 0
+# define SI_ADDR_SURF_BANK_WIDTH_2 1
+# define SI_ADDR_SURF_BANK_WIDTH_4 2
+# define SI_ADDR_SURF_BANK_WIDTH_8 3
+# define SI_GRPH_FORMAT(x) (((x) & 0x7) << 8)
+/* 8 BPP */
+# define SI_GRPH_FORMAT_INDEXED 0
+/* 16 BPP */
+# define SI_GRPH_FORMAT_ARGB1555 0
+# define SI_GRPH_FORMAT_ARGB565 1
+# define SI_GRPH_FORMAT_ARGB4444 2
+# define SI_GRPH_FORMAT_AI88 3
+# define SI_GRPH_FORMAT_MONO16 4
+# define SI_GRPH_FORMAT_BGRA5551 5
+/* 32 BPP */
+# define SI_GRPH_FORMAT_ARGB8888 0
+# define SI_GRPH_FORMAT_ARGB2101010 1
+# define SI_GRPH_FORMAT_32BPP_DIG 2
+# define SI_GRPH_FORMAT_8B_ARGB2101010 3
+# define SI_GRPH_FORMAT_BGRA1010102 4
+# define SI_GRPH_FORMAT_8B_BGRA1010102 5
+# define SI_GRPH_FORMAT_RGB111110 6
+# define SI_GRPH_FORMAT_BGR101111 7
+# define SI_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11)
+# define SI_ADDR_SURF_BANK_HEIGHT_1 0
+# define SI_ADDR_SURF_BANK_HEIGHT_2 1
+# define SI_ADDR_SURF_BANK_HEIGHT_4 2
+# define SI_ADDR_SURF_BANK_HEIGHT_8 3
+# define SI_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13)
+# define SI_ADDR_SURF_TILE_SPLIT_64B 0
+# define SI_ADDR_SURF_TILE_SPLIT_128B 1
+# define SI_ADDR_SURF_TILE_SPLIT_256B 2
+# define SI_ADDR_SURF_TILE_SPLIT_512B 3
+# define SI_ADDR_SURF_TILE_SPLIT_1KB 4
+# define SI_ADDR_SURF_TILE_SPLIT_2KB 5
+# define SI_ADDR_SURF_TILE_SPLIT_4KB 6
+# define SI_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18)
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_1 0
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_2 1
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_4 2
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_8 3
+# define SI_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20)
+# define SI_GRPH_ARRAY_LINEAR_GENERAL 0
+# define SI_GRPH_ARRAY_LINEAR_ALIGNED 1
+# define SI_GRPH_ARRAY_1D_TILED_THIN1 2
+# define SI_GRPH_ARRAY_2D_TILED_THIN1 4
+# define SI_GRPH_PIPE_CONFIG(x) (((x) & 0x1f) << 24)
+# define SI_ADDR_SURF_P2 0
+# define SI_ADDR_SURF_P4_8x16 4
+# define SI_ADDR_SURF_P4_16x16 5
+# define SI_ADDR_SURF_P4_16x32 6
+# define SI_ADDR_SURF_P4_32x32 7
+# define SI_ADDR_SURF_P8_16x16_8x16 8
+# define SI_ADDR_SURF_P8_16x32_8x16 9
+# define SI_ADDR_SURF_P8_32x32_8x16 10
+# define SI_ADDR_SURF_P8_16x32_16x16 11
+# define SI_ADDR_SURF_P8_32x32_16x16 12
+# define SI_ADDR_SURF_P8_32x32_16x32 13
+# define SI_ADDR_SURF_P8_32x64_32x32 14
+
#endif
if (dev_priv == NULL)
return -ENOMEM;
+ idr_init(&dev_priv->object_idr);
dev->dev_private = (void *)dev_priv;
dev_priv->chipset = chipset;
- idr_init(&dev->object_name_idr);
return 0;
}
static struct drm_driver driver;
+/*
+ * There are many DisplayLink-based graphics products, all with unique PIDs.
+ * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff)
+ * We also require a match on SubClass (0x00) and Protocol (0x00),
+ * which is compatible with all known USB 2.0 era graphics chips and firmware,
+ * but allows DisplayLink to increment those for any future incompatible chips
+ */
static struct usb_device_id id_table[] = {
- {.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+ {.idVendor = 0x17e9, .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0x00,
+ .bInterfaceProtocol = 0x00,
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL,},
{},
};
MODULE_DEVICE_TABLE(usb, id_table);
u8 length;
u16 key;
- key = *((u16 *) desc);
+ key = le16_to_cpu(*((u16 *) desc));
desc += sizeof(u16);
length = *desc;
desc++;
if (dev_priv == NULL)
return -ENOMEM;
+ idr_init(&dev_priv->object_idr);
dev->dev_private = (void *)dev_priv;
dev_priv->chipset = chipset;
- idr_init(&dev->object_name_idr);
-
pci_set_master(dev->pdev);
ret = drm_vblank_init(dev, 1);
#
# HID driver configuration
#
-menuconfig HID_SUPPORT
- bool "HID Devices"
- depends on INPUT
- default y
- ---help---
- Say Y here to get to see options for various computer-human interface
- device drivers. This option alone does not add any kernel code.
-
- If you say N, all options in this submenu will be skipped and disabled.
-
-if HID_SUPPORT
+menu "HID support"
+ depends on INPUT
config HID
- tristate "Generic HID support"
+ tristate "HID bus support"
depends on INPUT
default y
---help---
most commonly used to refer to the USB-HID specification, but other
devices (such as, but not strictly limited to, Bluetooth) are
designed using HID specification (this involves certain keyboards,
- mice, tablets, etc). This option compiles into kernel the generic
- HID layer code (parser, usages, etc.), which can then be used by
- transport-specific HID implementation (like USB or Bluetooth).
+ mice, tablets, etc). This option adds the HID bus to the kernel,
+ together with generic HID layer code. The HID devices are added and
+ removed from the HID bus by the transport-layer drivers, such as
+ usbhid (USB_HID) and hidp (BT_HIDP).
For docs and specs, see http://www.usb.org/developers/hidpage/
If unsure, say Y.
+if HID
+
config HID_BATTERY_STRENGTH
bool "Battery level reporting for HID devices"
depends on HID && POWER_SUPPLY && HID = POWER_SUPPLY
If unsure, say Y.
-source "drivers/hid/usbhid/Kconfig"
-
-menu "Special HID drivers"
- depends on HID
-
config HID_GENERIC
tristate "Generic HID driver"
depends on HID
- default y
+ default HID
---help---
- Support for generic HID devices.
+ Support for generic devices on the HID bus. This includes most
+ keyboards and mice, joysticks, tablets and digitizers.
To compile this driver as a module, choose M here: the module
will be called hid-generic.
If unsure, say Y.
+menu "Special HID drivers"
+ depends on HID
+
config HID_A4TECH
tristate "A4 tech mice" if EXPERT
depends on USB_HID
endmenu
-endif # HID_SUPPORT
+endif # HID
+
+source "drivers/hid/usbhid/Kconfig"
+
+endmenu
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
#define USB_VENDOR_ID_AVERMEDIA 0x07ca
#define USB_DEVICE_ID_AVER_FM_MR800 0xb800
+#define USB_VENDOR_ID_AXENTIA 0x12cf
+#define USB_DEVICE_ID_AXENTIA_FM_RADIO 0x7111
+
#define USB_VENDOR_ID_BAANTO 0x2453
#define USB_DEVICE_ID_BAANTO_MT_190W2 0x0100
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
- dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
- dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
+ dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
+ dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
__set_bit(EV_ABS, input->evbit);
input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
- input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2,
+ 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2,
+ 4, 0);
input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
/* Note: Touch Y position from the device is inverted relative
-comment "USB Input Devices"
+menu "USB HID support"
depends on USB
config USB_HID
- tristate "USB Human Interface Device (full HID) support"
+ tristate "USB HID transport layer"
default y
depends on USB && INPUT
select HID
---help---
- Say Y here if you want full HID support to connect USB keyboards,
+ Say Y here if you want to connect USB keyboards,
mice, joysticks, graphic tablets, or any other HID based devices
to your computer via USB, as well as Uninterruptible Power Supply
(UPS) and monitor control devices.
endmenu
-
+endmenu
*
* Based on hdaps.c driver:
* Copyright (C) 2005 Robert Love <rml@novell.com>
- * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com>
+ * Copyright (C) 2005 Jesper Juhl <jj@chaosbits.net>
*
* Fan control based on smcFanControl:
* Copyright (C) 2006 Hendrik Holtmann <holtmann@mac.com>
int i;
if (send_command(cmd) || send_argument(key)) {
- pr_warn("%s: read arg fail\n", key);
+ pr_warn("%.4s: read arg fail\n", key);
return -EIO;
}
for (i = 0; i < len; i++) {
if (__wait_status(0x05)) {
- pr_warn("%s: read data fail\n", key);
+ pr_warn("%.4s: read data fail\n", key);
return -EIO;
}
buffer[i] = inb(APPLESMC_DATA_PORT);
return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN;
}
+struct tjmax {
+ char const *id;
+ int tjmax;
+};
+
+static struct tjmax __cpuinitconst tjmax_table[] = {
+ { "CPU D410", 100000 },
+ { "CPU D425", 100000 },
+ { "CPU D510", 100000 },
+ { "CPU D525", 100000 },
+ { "CPU N450", 100000 },
+ { "CPU N455", 100000 },
+ { "CPU N470", 100000 },
+ { "CPU N475", 100000 },
+ { "CPU 230", 100000 },
+ { "CPU 330", 125000 },
+};
+
static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id,
struct device *dev)
{
int err;
u32 eax, edx;
struct pci_dev *host_bridge;
+ int i;
+
+ /* explicit tjmax table entries override heuristics */
+ for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) {
+ if (strstr(c->x86_model_id, tjmax_table[i].id))
+ return tjmax_table[i].tjmax;
+ }
/* Early chips have no MSR for TjMax */
/* Atom CPUs */
- if (c->x86_model == 0x1c) {
+ if (c->x86_model == 0x1c || c->x86_model == 0x26
+ || c->x86_model == 0x27) {
usemsr_ee = 0;
host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
tjmax = 90000;
pci_dev_put(host_bridge);
+ } else if (c->x86_model == 0x36) {
+ usemsr_ee = 0;
+ tjmax = 100000;
}
if (c->x86_model > 0xe && usemsr_ee) {
static int __init coretemp_init(void)
{
- int i, err = -ENODEV;
+ int i, err;
/*
* CPUID.06H.EAX[0] indicates whether the CPU has thermal
data->fan_rpm_control = true;
break;
default:
- mutex_unlock(&data->update_lock);
- return -EINVAL;
+ count = -EINVAL;
+ goto err;
}
- read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ if (result) {
+ count = result;
+ goto err;
+ }
if (data->fan_rpm_control)
conf_reg |= 0x80;
conf_reg &= ~0x80;
i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
-
+err:
mutex_unlock(&data->update_lock);
return count;
}
module_i2c_driver(jc42_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("JC42 driver");
MODULE_LICENSE("GPL");
module_i2c_driver(pem_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
MODULE_LICENSE("GPL");
module_i2c_driver(ltc4261_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("LTC4261 driver");
MODULE_LICENSE("GPL");
module_i2c_driver(max16065_driver);
-MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("MAX16065 driver");
MODULE_LICENSE("GPL");
*/
static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
- unsigned long cycle_time;
+ unsigned long cycle_time = 0;
int use_dma_info = 0;
const u8 xfer_mode = drive->dma_mode;
ide_set_drivedata(drive, (void *)cycle_time);
- printk("%s: %s selected (peak %dMB/s)\n", drive->name,
- ide_xfer_verbose(xfer_mode),
- 2000 / (unsigned long)ide_get_drivedata(drive));
+ printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n",
+ drive->name, ide_xfer_verbose(xfer_mode),
+ 2000 / (cycle_time ? cycle_time : (unsigned long) -1));
}
static const struct ide_port_ops icside_v6_port_ops = {
.dma_test_irq = icside_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
};
-#else
-#define icside_v6_dma_ops NULL
#endif
static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
static const struct ide_port_info icside_v6_port_info __initdata = {
.init_dma = icside_dma_off_init,
.port_ops = &icside_v6_no_dma_port_ops,
- .dma_ops = &icside_v6_dma_ops,
.host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
.mwdma_mask = ATA_MWDMA2,
.swdma_mask = ATA_SWDMA2,
ecard_set_drvdata(ec, state);
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
d.init_dma = icside_dma_init;
d.port_ops = &icside_v6_port_ops;
- } else
- d.dma_ops = NULL;
+ d.dma_ops = &icside_v6_dma_ops;
+ }
+#endif
ret = ide_host_register(host, &d, hws);
if (ret)
{
int *is_kme = priv_data;
- if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+ if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
+ != IO_DATA_PATH_WIDTH_8) {
pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
}
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc). See
- Documentation/iio for more information.
+ number of different physical interfaces (i2c, spi, etc).
if IIO
* New channel registration method - relies on the fact a group does
* not need to be initialized if it is name is NULL.
*/
- INIT_LIST_HEAD(&indio_dev->channel_attr_list);
if (indio_dev->channels)
for (i = 0; i < indio_dev->num_channels; i++) {
ret = iio_device_add_channel_sysfs(indio_dev,
static void iio_dev_release(struct device *device)
{
struct iio_dev *indio_dev = dev_to_iio_dev(device);
- cdev_del(&indio_dev->chrdev);
+ if (indio_dev->chrdev.dev)
+ cdev_del(&indio_dev->chrdev);
if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
iio_device_unregister_trigger_consumer(indio_dev);
iio_device_unregister_eventset(indio_dev);
iio_device_unregister_sysfs(indio_dev);
iio_device_unregister_debugfs(indio_dev);
+
+ ida_simple_remove(&iio_ida, indio_dev->id);
+ kfree(indio_dev);
}
static struct device_type iio_dev_type = {
dev_set_drvdata(&dev->dev, (void *)dev);
mutex_init(&dev->mlock);
mutex_init(&dev->info_exist_lock);
+ INIT_LIST_HEAD(&dev->channel_attr_list);
dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
if (dev->id < 0) {
void iio_device_free(struct iio_dev *dev)
{
- if (dev) {
- ida_simple_remove(&iio_ida, dev->id);
- kfree(dev);
- }
+ if (dev)
+ put_device(&dev->dev);
}
EXPORT_SYMBOL(iio_device_free);
mutex_lock(&indio_dev->info_exist_lock);
indio_dev->info = NULL;
mutex_unlock(&indio_dev->info_exist_lock);
- device_unregister(&indio_dev->dev);
+ device_del(&indio_dev->dev);
}
EXPORT_SYMBOL(iio_device_unregister);
subsys_initcall(iio_init);
static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_event)
{
- return (((ib_event->event == IB_CM_REQ_RECEIVED) ||
+ return (((ib_event->event == IB_CM_REQ_RECEIVED) &&
(ib_event->param.req_rcvd.qp_type == id->qp_type)) ||
((ib_event->event == IB_CM_SIDR_REQ_RECEIVED) &&
(id->qp_type == IB_QPT_UD)) ||
u32 max_inline_data;
int max_send_sge;
int max_recv_sge;
+ int max_srq_sge;
int max_mr;
u64 max_mr_size;
u32 max_num_mr_pbl;
struct ocrdma_dev_attr *attr,
struct ocrdma_mbx_query_config *rsp)
{
- int max_q_mem;
-
attr->max_pd =
(rsp->max_pd_ca_ack_delay & OCRDMA_MBX_QUERY_CFG_MAX_PD_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_PD_SHIFT;
attr->max_recv_sge = (rsp->max_write_send_sge &
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT;
+ attr->max_srq_sge = (rsp->max_srq_rqe_sge &
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK) >>
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET;
attr->max_ord_per_qp = (rsp->max_ird_ord_per_qp &
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT;
attr->max_inline_data =
attr->wqe_size - (sizeof(struct ocrdma_hdr_wqe) +
sizeof(struct ocrdma_sge));
- max_q_mem = OCRDMA_Q_PAGE_BASE_SIZE << (OCRDMA_MAX_Q_PAGE_SIZE_CNT - 1);
- /* hw can queue one less then the configured size,
- * so publish less by one to stack.
- */
if (dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
- dev->attr.max_wqe = max_q_mem / dev->attr.wqe_size;
attr->ird = 1;
attr->ird_page_size = OCRDMA_MIN_Q_PAGE_SIZE;
attr->num_ird_pages = MAX_OCRDMA_IRD_PAGES;
- } else
- dev->attr.max_wqe = (max_q_mem / dev->attr.wqe_size) - 1;
- dev->attr.max_rqe = (max_q_mem / dev->attr.rqe_size) - 1;
+ }
+ dev->attr.max_wqe = rsp->max_wqes_rqes_per_q >>
+ OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET;
+ dev->attr.max_rqe = rsp->max_wqes_rqes_per_q &
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK;
}
static int ocrdma_check_fw_config(struct ocrdma_dev *dev,
sgid->raw[15] = mac_addr[5];
}
-static void ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
+static bool ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
bool is_vlan, u16 vlan_id)
{
int i;
- bool found = false;
union ib_gid new_sgid;
- int free_idx = OCRDMA_MAX_SGID;
unsigned long flags;
memset(&ocrdma_zero_sgid, 0, sizeof(union ib_gid));
if (!memcmp(&dev->sgid_tbl[i], &ocrdma_zero_sgid,
sizeof(union ib_gid))) {
/* found free entry */
- if (!found) {
- free_idx = i;
- found = true;
- break;
- }
+ memcpy(&dev->sgid_tbl[i], &new_sgid,
+ sizeof(union ib_gid));
+ spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return true;
} else if (!memcmp(&dev->sgid_tbl[i], &new_sgid,
sizeof(union ib_gid))) {
/* entry already present, no addition is required. */
spin_unlock_irqrestore(&dev->sgid_lock, flags);
- return;
+ return false;
}
}
- /* if entry doesn't exist and if table has some space, add entry */
- if (found)
- memcpy(&dev->sgid_tbl[free_idx], &new_sgid,
- sizeof(union ib_gid));
spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return false;
}
static bool ocrdma_del_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
ocrdma_get_guid(dev, &sgid->raw[8]);
}
-static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
{
struct net_device *netdev, *tmp;
u16 vlan_id;
netdev = dev->nic_info.netdev;
- ocrdma_add_default_sgid(dev);
-
rcu_read_lock();
for_each_netdev_rcu(&init_net, tmp) {
if (netdev == tmp || vlan_dev_real_dev(tmp) == netdev) {
}
}
rcu_read_unlock();
+}
+#else
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
+{
+
+}
+#endif /* VLAN */
+
+static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+{
+ ocrdma_add_default_sgid(dev);
+ ocrdma_add_vlan_sgids(dev);
return 0;
}
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) || \
+defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
static int ocrdma_inet6addr_event(struct notifier_block *notifier,
unsigned long event, void *ptr)
struct ib_event gid_event;
struct ocrdma_dev *dev;
bool found = false;
+ bool updated = false;
bool is_vlan = false;
u16 vid = 0;
mutex_lock(&dev->dev_lock);
switch (event) {
case NETDEV_UP:
- ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
+ updated = ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
case NETDEV_DOWN:
- found = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
- if (found) {
- /* found the matching entry, notify
- * the consumers about it
- */
- gid_event.device = &dev->ibdev;
- gid_event.element.port_num = 1;
- gid_event.event = IB_EVENT_GID_CHANGE;
- ib_dispatch_event(&gid_event);
- }
+ updated = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
default:
break;
}
+ if (updated) {
+ /* GID table updated, notify the consumers about it */
+ gid_event.device = &dev->ibdev;
+ gid_event.element.port_num = 1;
+ gid_event.event = IB_EVENT_GID_CHANGE;
+ ib_dispatch_event(&gid_event);
+ }
mutex_unlock(&dev->dev_lock);
return NOTIFY_OK;
}
.notifier_call = ocrdma_inet6addr_event
};
-#endif /* IPV6 */
+#endif /* IPV6 and VLAN */
static enum rdma_link_layer ocrdma_link_layer(struct ib_device *device,
u8 port_num)
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK = 0xFFFF,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT = 16,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK = 0xFFFF <<
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK = 0xFFFF,
OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET = 0,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK = 0xFFFF <<
- OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_OFFSET = 16,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_MASK = 0xFFFF <<
dev = get_ocrdma_dev(ibdev);
memset(sgid, 0, sizeof(*sgid));
- if (index > OCRDMA_MAX_SGID)
+ if (index >= OCRDMA_MAX_SGID)
return -EINVAL;
memcpy(sgid, &dev->sgid_tbl[index], sizeof(*sgid));
IB_DEVICE_SHUTDOWN_PORT |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_LOCAL_DMA_LKEY;
- attr->max_sge = dev->attr.max_send_sge;
- attr->max_sge_rd = dev->attr.max_send_sge;
+ attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_srq_sge);
+ attr->max_sge_rd = 0;
attr->max_cq = dev->attr.max_cq;
attr->max_cqe = dev->attr.max_cqe;
attr->max_mr = dev->attr.max_mr;
min(dev->attr.max_ord_per_qp, dev->attr.max_ird_per_qp);
attr->max_qp_init_rd_atom = dev->attr.max_ord_per_qp;
attr->max_srq = (dev->attr.max_qp - 1);
- attr->max_srq_sge = attr->max_sge;
+ attr->max_srq_sge = attr->max_srq_sge;
attr->max_srq_wr = dev->attr.max_rqe;
attr->local_ca_ack_delay = dev->attr.local_ca_ack_delay;
attr->max_fast_reg_page_list_len = 0;
*stop = true;
expand = false;
}
- } else
+ } else {
+ *polled = true;
expand = ocrdma_update_err_rcqe(ibwc, cqe, qp, status);
+ }
return expand;
}
struct saa7146_dev *dev = video_drvdata(file);
struct saa7146_fh *fh = NULL;
int result = 0;
- enum v4l2_buf_type type;
DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
DEB_D("using: %p\n", dev);
- type = vdev->vfl_type == VFL_TYPE_GRABBER
- ? V4L2_BUF_TYPE_VIDEO_CAPTURE
- : V4L2_BUF_TYPE_VBI_CAPTURE;
-
/* check if an extension is registered */
if( NULL == dev->ext ) {
DEB_S("no extension registered for this device\n");
if(cx24110_readreg(state,0x10)&0x40) {
/* the RS error counter has finished one counting window */
cx24110_writereg(state,0x10,0x60); /* select the byer reg */
- cx24110_readreg(state, 0x12) |
+ (void)(cx24110_readreg(state, 0x12) |
(cx24110_readreg(state, 0x13) << 8) |
- (cx24110_readreg(state, 0x14) << 16);
+ (cx24110_readreg(state, 0x14) << 16));
cx24110_writereg(state,0x10,0x70); /* select the bler reg */
state->lastbler=cx24110_readreg(state,0x12)|
(cx24110_readreg(state,0x13)<<8)|
if (ret)
goto error;
- switch ((buf[0] >> 0) & 0x03) {
+ switch ((buf[0] >> 0) & 0x07) {
case 0:
c->modulation = QAM_16;
break;
lg_reg("writing %d registers...\n", len);
- for (i = 0; i < len - 1; i++) {
+ for (i = 0; i < len; i++) {
ret = lg216x_write_reg(state, regs[i].reg, regs[i].val);
if (lg_fail(ret))
return ret;
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc0a0),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+ { USB_DEVICE(0x2040, 0xf5a0),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ } /* Terminating entry */
};
goto err_out_free_region;
dev->io = pci_resource_start(pdev, 0);
- if (snd_tea575x_init(&dev->tea)) {
+ if (snd_tea575x_init(&dev->tea, THIS_MODULE)) {
printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n");
goto err_out_free_region;
}
snprintf(fmr2->tea.bus_info, sizeof(fmr2->tea.bus_info), "%s:%s",
fmr2->is_fmd2 ? "PnP" : "ISA", dev_name(pdev));
- if (snd_tea575x_init(&fmr2->tea)) {
+ if (snd_tea575x_init(&fmr2->tea, THIS_MODULE)) {
printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
release_region(fmr2->io, 2);
return -ENODEV;
{ USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) },
/* Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x10c5, 0x819a, USB_CLASS_HID, 0, 0) },
+ /* Axentia ALERT FM USB Receiver */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x12cf, 0x7111, USB_CLASS_HID, 0, 0) },
/* Terminating entry */
{ }
};
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 1, 0, 1 },
.gpiomute = 3,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 0x0f,
.gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
/* 0x04 for some cards ?? */
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= avermedia_tvphone_audio,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0xc00, 0x800, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 2, 3 },
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
- .needs_tvaudio = 1,
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 1, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1, 0),
.gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
.gpiomute = 0xcfa007,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.volume_gpio = winview_volume,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0, 0, 0 },
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 0x800, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0xc00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
.gpiomute = 0x40000,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0, 0x300, 0x900 },
.gpiomute = 0x900,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
Note: There exists another variant "Winfast 2000" with tv stereo !?
Note: eeprom only contains FF and pci subsystem id 107d:6606
*/
- .needs_tvaudio = 0,
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0x551400, 0x551200, 0, 0 },
.gpiomute = 0x551c00,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0xd0001, 0, 0 },
.gpiomute = 1,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 4, 11, 7 },
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0},
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_PHILIPS_PAL_I,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {2,0,0,0 },
.gpiomute = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
MUX2 (mask 0x30000):
0,2,3= from MSP34xx
1= FM stereo Radio from Tuner */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0x10, 8 },
.gpiomute = 4,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(3, 1),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_ABSENT,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0x800,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2),
.gpiomux = { },
.no_msp34xx = 1,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 1, 0, 4, 4 },
.gpiomute = 9,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.gpiomute = 0x1800,
.audio_mode_gpio= fv2000s_audio,
.no_msp34xx = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0x500, 0x300, 0x900 },
.gpiomute = 0x900,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
.gpiomute = 13,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_I_FM,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x01, 0x00, 0x03, 0x03 },
.gpiomute = 0x09,
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.muxsel = MUXSEL(2, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 4,
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
* btwincap uses 0x80000/0x80003
*/
.gpiomute = 4,
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 0, 1, 1),
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3},
.gpiomute = 4,
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
/* Tuner, Radio, external, internal, off, on */
.gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
.gpiomute = 0x0f,
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.svhs = 2,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
- .needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS, /* card has no svhs */
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 1, 1 },
- .needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_35,
.muxsel = MUXSEL(2, 3, 1, 0),
.no_msp34xx = 1,
.no_tda7432 = 1,
- .needs_tvaudio = 0,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.svhs = 2,
- .needs_tvaudio = 0,
.gpiomask = 0x68,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0x68, 0x68, 0x61, 0x61 },
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 2, 2, 2),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
- .needs_tvaudio = 0,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x008007,
.gpiomux = { 0, 0x000001,0,0 },
- .needs_tvaudio = 1,
.has_radio = 1,
},
[BTTV_BOARD_TIBET_CS16] = {
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
.tuner_addr = 0xc1 >>1,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TENA_9533_DI,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
- .needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
.gpiomute = 3, /* CONTVFMi */
- .needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.gpiomask = 0x00,
.muxsel = MUXSEL(0, 2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x00,
.muxsel = MUXSEL(3, 2, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
- .needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
- .needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
struct tuner_setup tun_setup;
/* Load tuner module before issuing tuner config call! */
- if (bttv_tvcards[btv->c.type].has_radio)
+ if (btv->has_radio)
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
tun_setup.type = btv->tuner_type;
tun_setup.addr = addr;
- if (bttv_tvcards[btv->c.type].has_radio)
+ if (btv->has_radio)
tun_setup.mode_mask |= T_RADIO;
bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
}
+
+ /* The 61334 needs the msp3410 to do the radio demod to get sound */
+ if (tv.model == 61334)
+ btv->radio_uses_msp_demodulator = 1;
}
static int terratec_active_radio_upgrade(struct bttv *btv)
For now this is sufficient. */
switch (input) {
case TVAUDIO_INPUT_RADIO:
+ /* Some boards need the msp do to the radio demod */
+ if (btv->radio_uses_msp_demodulator) {
+ in = MSP_INPUT_DEFAULT;
+ break;
+ }
in = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1,
MSP_DSP_IN_SCART, MSP_DSP_IN_SCART);
break;
/* i2c audio flags */
unsigned int no_msp34xx:1;
unsigned int no_tda7432:1;
- unsigned int needs_tvaudio:1;
unsigned int msp34xx_alt:1;
/* Note: currently no card definition needs to mark the presence
of a RDS saa6588 chip. If this is ever needed, then add a new
/* radio data/state */
int has_radio;
int radio_user;
+ int radio_uses_msp_demodulator;
/* miro/pinnacle + Aimslab VHX
philips matchbox (tea5757 radio tuner) support */
}
o = i * pixels_per_line + pixels_read + k;
if (o < len) {
+ u8 ch = invert - buffer[k];
got++;
- put_user((invert - buffer[k]) << shift, buf + o);
+ put_user(ch << shift, buf + o);
}
}
pixels_read += bytes;
struct qcam *qcam = video_drvdata(file);
strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
- strlcpy(vcap->card, "B&W Quickcam", sizeof(vcap->card));
- strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+ strlcpy(vcap->card, "Connectix B&W Quickcam", sizeof(vcap->card));
+ strlcpy(vcap->bus_info, qcam->pport->name, sizeof(vcap->bus_info));
vcap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
vcap->capabilities = vcap->device_caps | V4L2_CAP_DEVICE_CAPS;
return 0;
pix->height = qcam->height / qcam->transfer_scale;
pix->pixelformat = (qcam->bpp == 4) ? V4L2_PIX_FMT_Y4 : V4L2_PIX_FMT_Y6;
pix->field = V4L2_FIELD_NONE;
- pix->bytesperline = qcam->width;
- pix->sizeimage = qcam->width * qcam->height;
+ pix->bytesperline = pix->width;
+ pix->sizeimage = pix->width * pix->height;
/* Just a guess */
pix->colorspace = V4L2_COLORSPACE_SRGB;
return 0;
"4-Bit Monochrome", V4L2_PIX_FMT_Y4,
{ 0, 0, 0, 0 }
},
- { 0, 0, 0,
+ { 1, 0, 0,
"6-Bit Monochrome", V4L2_PIX_FMT_Y6,
{ 0, 0, 0, 0 }
},
return 0;
}
+static int qcam_enum_framesizes(struct file *file, void *fh,
+ struct v4l2_frmsizeenum *fsize)
+{
+ static const struct v4l2_frmsize_discrete sizes[] = {
+ { 80, 60 },
+ { 160, 120 },
+ { 320, 240 },
+ };
+
+ if (fsize->index > 2)
+ return -EINVAL;
+ if (fsize->pixel_format != V4L2_PIX_FMT_Y4 &&
+ fsize->pixel_format != V4L2_PIX_FMT_Y6)
+ return -EINVAL;
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete = sizes[fsize->index];
+ return 0;
+}
+
static ssize_t qcam_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
return len;
}
+static unsigned int qcam_poll(struct file *filp, poll_table *wait)
+{
+ return v4l2_ctrl_poll(filp, wait) | POLLIN | POLLRDNORM;
+}
+
static int qcam_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct qcam *qcam =
.owner = THIS_MODULE,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
- .poll = v4l2_ctrl_poll,
+ .poll = qcam_poll,
.unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
.vidioc_s_input = qcam_s_input,
.vidioc_enum_input = qcam_enum_input,
.vidioc_enum_fmt_vid_cap = qcam_enum_fmt_vid_cap,
+ .vidioc_enum_framesizes = qcam_enum_framesizes,
.vidioc_g_fmt_vid_cap = qcam_g_fmt_vid_cap,
.vidioc_s_fmt_vid_cap = qcam_s_fmt_vid_cap,
.vidioc_try_fmt_vid_cap = qcam_try_fmt_vid_cap,
return NULL;
v4l2_dev = &qcam->v4l2_dev;
- strlcpy(v4l2_dev->name, "bw-qcam", sizeof(v4l2_dev->name));
+ snprintf(v4l2_dev->name, sizeof(v4l2_dev->name), "bw-qcam%d", num_cams);
- if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+ if (v4l2_device_register(port->dev, v4l2_dev) < 0) {
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
kfree(qcam);
return NULL;
return NULL;
}
qcam->pport = port;
- qcam->pdev = parport_register_device(port, "bw-qcam", NULL, NULL,
+ qcam->pdev = parport_register_device(port, v4l2_dev->name, NULL, NULL,
NULL, 0, NULL);
if (qcam->pdev == NULL) {
v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
return -ENODEV;
}
qc_calibrate(qcam);
+ v4l2_ctrl_handler_setup(&qcam->hdl);
parport_release(qcam->pdev);
}
CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%lx\n",
+ "irq: %d, latency: %d, memory: 0x%llx\n",
cx->pci_dev->device, cx->card_rev, pci_dev->bus->number,
PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn),
- cx->pci_dev->irq, pci_latency, (unsigned long)cx->base_addr);
+ cx->pci_dev->irq, pci_latency, (u64)cx->base_addr);
return 0;
}
if (retval)
goto err;
- CX18_DEBUG_INFO("base addr: 0x%08x\n", cx->base_addr);
+ CX18_DEBUG_INFO("base addr: 0x%llx\n", (u64)cx->base_addr);
/* PCI Device Setup */
retval = cx18_setup_pci(cx, pci_dev, pci_id);
goto free_workqueues;
/* map io memory */
- CX18_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
+ CX18_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)cx->base_addr + CX18_MEM_OFFSET, CX18_MEM_SIZE);
cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
CX18_MEM_SIZE);
if (!cx->enc_mem) {
unique ID. Starts at 1, so 0 can be used as
uninitialized value in the stream->id. */
- u32 base_addr;
+ resource_size_t base_addr;
u8 card_rev;
void __iomem *enc_mem, *reg_mem;
apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
while (offset + sizeof(seghdr) < fw->size) {
- /* TODO: byteswapping */
- memcpy(&seghdr, src + offset / 4, sizeof(seghdr));
+ const u32 *shptr = src + offset / 4;
+
+ seghdr.sync1 = le32_to_cpu(shptr[0]);
+ seghdr.sync2 = le32_to_cpu(shptr[1]);
+ seghdr.addr = le32_to_cpu(shptr[2]);
+ seghdr.size = le32_to_cpu(shptr[3]);
+
offset += sizeof(seghdr);
if (seghdr.sync1 != APU_ROM_SYNC1 ||
seghdr.sync2 != APU_ROM_SYNC2) {
{
u32 handle, mdl_ack_offset, mdl_ack_count;
struct cx18_mailbox *mb;
+ int i;
mb = &order->mb;
handle = mb->args[0];
return -1;
}
- cx18_memcpy_fromio(cx, order->mdl_ack, cx->enc_mem + mdl_ack_offset,
- sizeof(struct cx18_mdl_ack) * mdl_ack_count);
+ for (i = 0; i < sizeof(struct cx18_mdl_ack) * mdl_ack_count; i += sizeof(u32))
+ ((u32 *)order->mdl_ack)[i / sizeof(u32)] =
+ cx18_readl(cx, cx->enc_mem + mdl_ack_offset + i);
if ((order->flags & CX18_F_EWO_MB_STALE) == 0)
mb_ack_irq(cx, order);
struct cx18_mailbox *order_mb;
struct cx18_in_work_order *order;
int submit;
+ int i;
switch (rpu) {
case CPU:
order_mb = &order->mb;
/* mb->cmd and mb->args[0] through mb->args[2] */
- cx18_memcpy_fromio(cx, &order_mb->cmd, &mb->cmd, 4 * sizeof(u32));
+ for (i = 0; i < 4; i++)
+ (&order_mb->cmd)[i] = cx18_readl(cx, &mb->cmd + i);
+
/* mb->request and mb->ack. N.B. we want to read mb->ack last */
- cx18_memcpy_fromio(cx, &order_mb->request, &mb->request,
- 2 * sizeof(u32));
+ for (i = 0; i < 2; i++)
+ (&order_mb->request)[i] = cx18_readl(cx, &mb->request + i);
if (order_mb->request == order_mb->ack) {
CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
dprintk(1,"Loading firmware ...\n");
dataptr = (u32*)firmware->data;
for (i = 0; i < (firmware->size >> 2); i++) {
- value = *dataptr;
+ value = le32_to_cpu(*dataptr);
checksum += ~value;
memory_write(dev->core, i, value);
dataptr++;
[EM2884_BOARD_CINERGY_HTC_STICK] = {
.name = "Terratec Cinergy HTC Stick",
.has_dvb = 1,
+ .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
#if 0
.tuner_type = TUNER_PHILIPS_TDA8290,
.tuner_addr = 0x41,
if (dev->board.ir_codes == NULL) {
/* No remote control support */
+ em28xx_warn("Remote control support is not available for "
+ "this card.\n");
return 0;
}
enum v4l2_buf_type buf_type)
{
struct gspca_dev *gspca_dev = video_drvdata(file);
- int ret;
+ int i, ret;
if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
wake_up_interruptible(&gspca_dev->wq);
/* empty the transfer queues */
+ for (i = 0; i < gspca_dev->nframes; i++)
+ gspca_dev->frame[i].v4l2_buf.flags &= ~BUF_ALL_FLAGS;
atomic_set(&gspca_dev->fr_q, 0);
atomic_set(&gspca_dev->fr_i, 0);
gspca_dev->fr_o = 0;
static void setcontrast(struct gspca_dev *gspca_dev);
static void setgain(struct gspca_dev *gspca_dev);
static void setexposure(struct gspca_dev *gspca_dev);
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val);
+static void setagc(struct gspca_dev *gspca_dev);
static void setawb(struct gspca_dev *gspca_dev);
static void setaec(struct gspca_dev *gspca_dev);
static void setsharpness(struct gspca_dev *gspca_dev);
.step = 1,
.default_value = 1,
},
- .set = sd_setagc
+ .set_control = setagc
},
[AWB] = {
{
int i;
for (i = 0; i < 5; i++) {
+ msleep(10);
data = ov534_reg_read(gspca_dev, OV534_REG_STATUS);
switch (data) {
cam->ctrls = sd->ctrls;
- /* the auto white balance control works only when auto gain is set */
- if (sd_ctrls[AGC].qctrl.default_value == 0)
- gspca_dev->ctrl_inac |= (1 << AWB);
-
cam->cam_mode = ov772x_mode;
cam->nmodes = ARRAY_SIZE(ov772x_mode);
} while (remaining_len > 0);
}
-static int sd_setagc(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->ctrls[AGC].val = val;
-
- /* the auto white balance control works only
- * when auto gain is set */
- if (val) {
- gspca_dev->ctrl_inac &= ~(1 << AWB);
- } else {
- gspca_dev->ctrl_inac |= (1 << AWB);
- if (sd->ctrls[AWB].val) {
- sd->ctrls[AWB].val = 0;
- if (gspca_dev->streaming)
- setawb(gspca_dev);
- }
- }
- if (gspca_dev->streaming)
- setagc(gspca_dev);
- return gspca_dev->usb_err;
-}
-
static int sd_querymenu(struct gspca_dev *gspca_dev,
struct v4l2_querymenu *menu)
{
int i;
for (i = 0; i < 5; i++) {
+ msleep(10);
data = reg_r(gspca_dev, OV534_REG_STATUS);
switch (data) {
struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler;
gspca_dev->vdev.ctrl_handler = hdl;
- v4l2_ctrl_handler_init(hdl, 4);
+ v4l2_ctrl_handler_init(hdl, 5);
sd->contrast = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_CONTRAST, 0, 15, 1, 7);
V4L2_CID_SATURATION, 0, 255, 1, 127);
sd->hue = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_HUE, -180, 180, 1, 0);
- v4l2_ctrl_cluster(4, &sd->brightness);
sd->gamma = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_GAMMA, 0, 255, 1, 0x10);
V4L2_CID_BLUE_BALANCE, 0, 127, 1, 0x28);
sd->red = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_RED_BALANCE, 0, 127, 1, 0x28);
- v4l2_ctrl_cluster(2, &sd->blue);
if (sd->sensor != SENSOR_OV9655 && sd->sensor != SENSOR_SOI968 &&
sd->sensor != SENSOR_OV7670 && sd->sensor != SENSOR_MT9M001 &&
V4L2_CID_HFLIP, 0, 1, 1, 0);
sd->vflip = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
- v4l2_ctrl_cluster(2, &sd->hflip);
}
if (sd->sensor != SENSOR_SOI968 && sd->sensor != SENSOR_MT9VPRB &&
V4L2_CID_GAIN, 0, 28, 1, 0);
sd->autogain = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ }
+
+ sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
+ V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
+ if (hdl->error) {
+ pr_err("Could not initialize controls\n");
+ return hdl->error;
+ }
+
+ v4l2_ctrl_cluster(4, &sd->brightness);
+ v4l2_ctrl_cluster(2, &sd->blue);
+ if (sd->hflip)
+ v4l2_ctrl_cluster(2, &sd->hflip);
+ if (sd->autogain) {
if (sd->sensor == SENSOR_SOI968)
/* this sensor doesn't have the exposure control and
autogain is clustered with gain instead. This works
/* Otherwise autogain is clustered with exposure. */
v4l2_ctrl_auto_cluster(2, &sd->autogain, 0, false);
}
-
- sd->jpegqual = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
- V4L2_CID_JPEG_COMPRESSION_QUALITY, 50, 90, 1, 80);
- if (hdl->error) {
- pr_err("Could not initialize controls\n");
- return hdl->error;
- }
return 0;
}
| (SENSOR_ ## sensor << 8) \
| (flags)
static const struct usb_device_id device_table[] = {
- {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
+ {USB_DEVICE(0x0458, 0x7025), BSF(SN9C120, MI0360B, F_PDN_INV)},
{USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
{USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)},
{USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)},
pci_write_config_dword(pdev, 0x40, 0xffff);
IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
- "irq: %d, latency: %d, memory: 0x%lx\n",
+ "irq: %d, latency: %d, memory: 0x%llx\n",
pdev->device, pdev->revision, pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
- pdev->irq, pci_latency, (unsigned long)itv->base_addr);
+ pdev->irq, pci_latency, (u64)itv->base_addr);
return 0;
}
itv->cxhdl.priv = itv;
itv->cxhdl.func = ivtv_api_func;
- IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv->base_addr);
+ IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr);
/* PCI Device Setup */
retval = ivtv_setup_pci(itv, pdev, pci_id);
goto free_mem;
/* map io memory */
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE);
itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
IVTV_ENCODER_SIZE);
if (!itv->enc_mem) {
}
if (itv->has_cx23415) {
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
IVTV_DECODER_SIZE);
if (!itv->dec_mem) {
}
/* map registers memory */
- IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
- itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
+ IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n",
+ (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
itv->reg_mem =
ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
if (!itv->reg_mem) {
struct v4l2_subdev *sd_video; /* controlling video decoder subdev */
struct v4l2_subdev *sd_audio; /* controlling audio subdev */
struct v4l2_subdev *sd_muxer; /* controlling audio muxer subdev */
- u32 base_addr; /* PCI resource base address */
+ resource_size_t base_addr; /* PCI resource base address */
volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
volatile void __iomem *reg_mem; /* pointer to mapped registers */
V4L2_M2M_DST = 1,
};
-/* Source and destination queue data */
-static struct m2mtest_q_data q_data[2];
-
-static struct m2mtest_q_data *get_q_data(enum v4l2_buf_type type)
-{
- switch (type) {
- case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- return &q_data[V4L2_M2M_SRC];
- case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- return &q_data[V4L2_M2M_DST];
- default:
- BUG();
- }
- return NULL;
-}
-
#define V4L2_CID_TRANS_TIME_MSEC V4L2_CID_PRIVATE_BASE
#define V4L2_CID_TRANS_NUM_BUFS (V4L2_CID_PRIVATE_BASE + 1)
int aborting;
struct v4l2_m2m_ctx *m2m_ctx;
+
+ /* Source and destination queue data */
+ struct m2mtest_q_data q_data[2];
};
+static struct m2mtest_q_data *get_q_data(struct m2mtest_ctx *ctx,
+ enum v4l2_buf_type type)
+{
+ switch (type) {
+ case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ return &ctx->q_data[V4L2_M2M_SRC];
+ case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ return &ctx->q_data[V4L2_M2M_DST];
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+
static struct v4l2_queryctrl *get_ctrl(int id)
{
int i;
int tile_w, bytes_left;
int width, height, bytesperline;
- q_data = get_q_data(V4L2_BUF_TYPE_VIDEO_OUTPUT);
+ q_data = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
width = q_data->width;
height = q_data->height;
if (!vq)
return -EINVAL;
- q_data = get_q_data(f->type);
+ q_data = get_q_data(ctx, f->type);
f->fmt.pix.width = q_data->width;
f->fmt.pix.height = q_data->height;
if (!vq)
return -EINVAL;
- q_data = get_q_data(f->type);
+ q_data = get_q_data(ctx, f->type);
if (!q_data)
return -EINVAL;
struct m2mtest_q_data *q_data;
unsigned int size, count = *nbuffers;
- q_data = get_q_data(vq->type);
+ q_data = get_q_data(ctx, vq->type);
size = q_data->width * q_data->height * q_data->fmt->depth >> 3;
dprintk(ctx->dev, "type: %d\n", vb->vb2_queue->type);
- q_data = get_q_data(vb->vb2_queue->type);
+ q_data = get_q_data(ctx, vb->vb2_queue->type);
if (vb2_plane_size(vb, 0) < q_data->sizeimage) {
dprintk(ctx->dev, "%s data will not fit into plane (%lu < %lu)\n",
ctx->transtime = MEM2MEM_DEF_TRANSTIME;
ctx->num_processed = 0;
+ ctx->q_data[V4L2_M2M_SRC].fmt = &formats[0];
+ ctx->q_data[V4L2_M2M_DST].fmt = &formats[0];
+
ctx->m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
if (IS_ERR(ctx->m2m_ctx)) {
goto err_m2m;
}
- q_data[V4L2_M2M_SRC].fmt = &formats[0];
- q_data[V4L2_M2M_DST].fmt = &formats[0];
-
return 0;
v4l2_m2m_release(dev->m2m_dev);
PRP_INTR_CH2OVF,
}
},
- {
- .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8,
- .out_fmt = V4L2_PIX_FMT_YUV420,
- .cfg = {
- .channel = 2,
- .in_fmt = PRP_CNTL_DATA_IN_YUV422,
- .out_fmt = PRP_CNTL_CH2_OUT_YUV420,
- .src_pixel = 0x22000888, /* YUV422 (YUYV) */
- .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
- PRP_INTR_CH2FC | PRP_INTR_LBOVF |
- PRP_INTR_CH2OVF,
- }
- },
};
static struct mx2_fmt_cfg *mx27_emma_prp_get_format(
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx2_camera_dev *pcdev = ici->priv;
struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
- const struct soc_camera_format_xlate *xlate;
unsigned long common_flags;
int ret;
int bytesperline;
return ret;
}
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (!xlate) {
- dev_warn(icd->parent, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
-
- if (xlate->code == V4L2_MBUS_FMT_YUYV8_2X8) {
- csicr1 |= CSICR1_PACK_DIR;
- csicr1 &= ~CSICR1_SWAP16_EN;
- dev_dbg(icd->parent, "already yuyv format, don't convert\n");
- } else if (xlate->code == V4L2_MBUS_FMT_UYVY8_2X8) {
- csicr1 &= ~CSICR1_PACK_DIR;
- csicr1 |= CSICR1_SWAP16_EN;
- dev_dbg(icd->parent, "convert uyvy mbus format into yuyv\n");
- } else {
- dev_warn(icd->parent, "mbus format not supported\n");
- return -EINVAL;
- }
-
if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_HSYNC_POL;
+ if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
+ csicr1 |= CSICR1_SWAP16_EN;
if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
csicr1 |= CSICR1_EXT_VSYNC;
if (pcdev->platform_flags & MX2_CAMERA_CCIR)
csicr1 |= CSICR1_GCLK_MODE;
if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
csicr1 |= CSICR1_INV_DATA;
+ if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
+ csicr1 |= CSICR1_PACK_DIR;
pcdev->csicr1 = csicr1;
return 0;
}
- if (code == V4L2_MBUS_FMT_YUYV8_2X8 ||
- code == V4L2_MBUS_FMT_UYVY8_2X8) {
+ if (code == V4L2_MBUS_FMT_YUYV8_2X8) {
formats++;
if (xlate) {
/*
}
}
- if (code == V4L2_MBUS_FMT_UYVY8_2X8) {
- formats++;
- if (xlate) {
- xlate->host_fmt =
- soc_mbus_get_fmtdesc(V4L2_MBUS_FMT_YUYV8_2X8);
- xlate->code = code;
- dev_dbg(dev, "Providing host format %s for sensor code %d\n",
- xlate->host_fmt->name, code);
- xlate++;
- }
- }
-
/* Generic pass-trough */
formats++;
if (xlate) {
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/isa.h>
#include <asm/io.h>
ctx->effect.type = FIMC_REG_CIIMGEFF_FIN_BYPASS;
if (!handler->error) {
- v4l2_ctrl_cluster(3, &ctrls->colorfx);
+ v4l2_ctrl_cluster(2, &ctrls->colorfx);
ctrls->ready = true;
}
decoded pic */
#define S5P_FIMV_SI_DISPLAY_Y_ADR 0x2010 /* luma addr of displayed pic */
#define S5P_FIMV_SI_DISPLAY_C_ADR 0x2014 /* chroma addrof displayed pic */
+
#define S5P_FIMV_SI_CONSUMED_BYTES 0x2018 /* Consumed number of bytes to
decode a frame */
#define S5P_FIMV_SI_DISPLAY_STATUS 0x201c /* status of decoded picture */
+#define S5P_FIMV_SI_DECODE_Y_ADR 0x2024 /* luma addr of decoded pic */
+#define S5P_FIMV_SI_DECODE_C_ADR 0x2028 /* chroma addrof decoded pic */
+#define S5P_FIMV_SI_DECODE_STATUS 0x202c /* status of decoded picture */
+
#define S5P_FIMV_SI_CH0_SB_ST_ADR 0x2044 /* start addr of stream buf */
#define S5P_FIMV_SI_CH0_SB_FRM_SIZE 0x2048 /* size of stream buf */
#define S5P_FIMV_SI_CH0_DESC_ADR 0x204c /* addr of descriptor buf */
switch (ctrl->id) {
case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY:
- ctx->loop_filter_mpeg4 = ctrl->val;
+ ctx->display_delay = ctrl->val;
break;
case V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE:
ctx->display_delay_enable = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:
- ctx->display_delay = ctrl->val;
+ ctx->loop_filter_mpeg4 = ctrl->val;
break;
case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:
ctx->slice_interface = ctrl->val;
.minimum = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
.maximum = V4L2_MPEG_VIDEO_H264_LEVEL_4_0,
.default_value = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
- .menu_skip_mask = ~(
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_1) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_4_2) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_0) |
- (1 << V4L2_MPEG_VIDEO_H264_LEVEL_5_1)
- ),
},
{
.id = V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL,
.type = V4L2_CTRL_TYPE_MENU,
.minimum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
.maximum = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED,
- .default_value = 0,
+ .default_value = V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED,
.menu_skip_mask = 0,
},
{
.type = V4L2_CTRL_TYPE_MENU,
.minimum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
.maximum = V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE,
- .default_value = 0,
+ .default_value = V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE,
.menu_skip_mask = 0,
},
{
mfc_err("failed to try output format\n");
return -EINVAL;
}
+ v4l_bound_align_image(&pix_fmt_mp->width, 8, 1920, 1,
+ &pix_fmt_mp->height, 4, 1080, 1, 0);
} else {
mfc_err("invalid buf type\n");
return -EINVAL;
S5P_FIMV_SI_DISPLAY_Y_ADR) << \
MFC_OFFSET_SHIFT)
#define s5p_mfc_get_dec_y_adr() (readl(dev->regs_base + \
- S5P_FIMV_SI_DISPLAY_Y_ADR) << \
+ S5P_FIMV_SI_DECODE_Y_ADR) << \
MFC_OFFSET_SHIFT)
#define s5p_mfc_get_dspl_status() readl(dev->regs_base + \
S5P_FIMV_SI_DISPLAY_STATUS)
+#define s5p_mfc_get_dec_status() readl(dev->regs_base + \
+ S5P_FIMV_SI_DECODE_STATUS)
#define s5p_mfc_get_frame_type() (readl(dev->regs_base + \
S5P_FIMV_DECODE_FRAME_TYPE) \
& S5P_FIMV_DECODE_FRAME_MASK)
#ifndef S5P_MFC_SHM_H_
#define S5P_MFC_SHM_H_
-enum MFC_SHM_OFS
-{
+enum MFC_SHM_OFS {
EXTENEDED_DECODE_STATUS = 0x00, /* D */
SET_FRAME_TAG = 0x04, /* D */
GET_FRAME_TAG_TOP = 0x08, /* D */
config VIDEO_SMIAPP
tristate "SMIA++/SMIA sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
select VIDEO_SMIAPP_PLL
---help---
This is a generic driver for SMIA++/SMIA camera modules.
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
#include <media/v4l2-device.h>
return 0;
if (vt->type == t->mode && analog_ops->get_afc)
vt->afc = analog_ops->get_afc(&t->fe);
- if (t->mode != V4L2_TUNER_RADIO) {
+ if (vt->type != V4L2_TUNER_RADIO) {
vt->capability |= V4L2_TUNER_CAP_NORM;
vt->rangelow = tv_range[0] * 16;
vt->rangehigh = tv_range[1] * 16;
SET_VALID_IOCTL(ops, VIDIOC_TRY_ENCODER_CMD, vidioc_try_encoder_cmd);
SET_VALID_IOCTL(ops, VIDIOC_DECODER_CMD, vidioc_decoder_cmd);
SET_VALID_IOCTL(ops, VIDIOC_TRY_DECODER_CMD, vidioc_try_decoder_cmd);
- if (ops->vidioc_g_parm || vdev->current_norm)
+ if (ops->vidioc_g_parm || vdev->vfl_type == VFL_TYPE_GRABBER)
set_bit(_IOC_NR(VIDIOC_G_PARM), valid_ioctls);
SET_VALID_IOCTL(ops, VIDIOC_S_PARM, vidioc_s_parm);
SET_VALID_IOCTL(ops, VIDIOC_G_TUNER, vidioc_g_tuner);
SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_PRESET, vidioc_query_dv_preset);
SET_VALID_IOCTL(ops, VIDIOC_S_DV_TIMINGS, vidioc_s_dv_timings);
SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings);
/* yes, really vidioc_subscribe_event */
SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event);
SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event);
break;
ret = 0;
+ p->parm.capture.readbuffers = 2;
if (ops->vidioc_g_std)
ret = ops->vidioc_g_std(file, fh, &std);
if (ret == 0)
} else if (vino_drvdata->decoder
&& (vino_drvdata->decoder_owner == VINO_NO_CHANNEL)) {
int input;
- int data_norm;
+ int data_norm = 0;
v4l2_std_id norm;
input = VINO_INPUT_COMPOSITE;
}
if (vino_drvdata->decoder_owner == vcs->channel) {
- int data_norm;
+ int data_norm = 0;
v4l2_std_id norm;
ret = decoder_call(video, s_routing,
vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
{
struct vivi_dev *dev = video_drvdata(file);
+ int err;
dprintk(dev, 1, "read called\n");
- return vb2_read(&dev->vb_vidq, data, count, ppos,
+ mutex_lock(&dev->mutex);
+ err = vb2_read(&dev->vb_vidq, data, count, ppos,
file->f_flags & O_NONBLOCK);
+ mutex_unlock(&dev->mutex);
+ return err;
}
static unsigned int
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/i2c.h>
* Copyright (C) ST Microelectronics SA 2011
*
* License Terms: GNU General Public License, version 2
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/spi/spi.h>
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
struct mei_cl *cl,
struct mei_io_list *cmpl_list)
{
- if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) +
+ if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
sizeof(struct hbm_flow_control))) {
/* return the cancel routine */
list_del(&cb_pos->cb_list);
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
pdev->irq);
- goto unmap_memory;
+ goto disable_msi;
}
INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
if (mei_hw_init(dev)) {
mei_disable_interrupts(dev);
flush_scheduled_work();
free_irq(pdev->irq, dev);
+disable_msi:
pci_disable_msi(pdev);
-unmap_memory:
pci_iounmap(pdev, dev->mem_addr);
free_device:
kfree(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
+
+ misc_deregister(&mei_misc_device);
}
#ifdef CONFIG_PM
static int mei_pci_suspend(struct device *device)
*/
static void __exit mei_exit_module(void)
{
- misc_deregister(&mei_misc_device);
pci_unregister_driver(&mei_driver);
pr_debug("unloaded successfully.\n");
};
static const struct watchdog_info wd_info = {
.identity = INTEL_AMT_WATCHDOG_ID,
- .options = WDIOF_KEEPALIVEPING,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY,
};
static struct watchdog_device amt_wd_dev = {
struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
- unsigned int timeout_us;
struct scatterlist sg;
cmd.arg = 0;
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
- data.timeout_ns = card->csd.tacc_ns * 100;
- data.timeout_clks = card->csd.tacc_clks * 100;
-
- timeout_us = data.timeout_ns / 1000;
- timeout_us += data.timeout_clks * 1000 /
- (card->host->ios.clock / 1000);
-
- if (timeout_us > 100000) {
- data.timeout_ns = 100000000;
- data.timeout_clks = 0;
- }
-
data.blksz = 4;
data.blocks = 1;
data.flags = MMC_DATA_READ;
data.sg = &sg;
data.sg_len = 1;
+ mmc_set_data_timeout(&data, card);
mrq.cmd = &cmd;
mrq.data = &data;
if (!err)
mmc_card_set_sleep(host->card);
} else if (!mmc_host_is_spi(host))
- mmc_deselect_cards(host);
+ err = mmc_deselect_cards(host);
host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
*/
static int mmc_sd_suspend(struct mmc_host *host)
{
+ int err = 0;
+
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
if (!mmc_host_is_spi(host))
- mmc_deselect_cards(host);
+ err = mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
- return 0;
+ return err;
}
/*
if (ret)
return ret;
+ if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
+ pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
+ mmc_hostname(card->host), ctrl);
+
+ /* set as 4-bit bus width */
+ ctrl &= ~SDIO_BUS_WIDTH_MASK;
ctrl |= SDIO_BUS_WIDTH_4BIT;
ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
#define atmci_writel(port,reg,value) \
__raw_writel((value), (port)->regs + reg)
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
+{
+ if (maxburst > 1)
+ return fls(maxburst) - 2;
+ else
+ return 0;
+}
+
#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
enum dma_data_direction direction;
enum dma_transfer_direction slave_dirn;
unsigned int sglen;
+ u32 maxburst;
u32 iflags;
data->error = -EINPROGRESS;
if (!chan)
return -ENODEV;
- if (host->caps.has_dma)
- atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
-
if (data->flags & MMC_DATA_READ) {
direction = DMA_FROM_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
+ maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
} else {
direction = DMA_TO_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
+ maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
}
+ atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN);
+
sglen = dma_map_sg(chan->device->dev, data->sg,
data->sg_len, direction);
platform_set_drvdata(pdev, host);
+ setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+
/* We need at least one slot to succeed */
nr_slots = 0;
ret = -ENODEV;
}
}
- setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
-
dev_info(&pdev->dev,
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
host->mapbase, irq, nr_slots);
p->des3 = host->sg_dma;
p->des0 = IDMAC_DES0_ER;
+ mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET);
+
/* Mask out interrupts - get Tx & Rx complete only */
mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
SDMMC_IDMAC_INT_TI);
u32 div;
if (slot->clock != host->current_speed) {
- if (host->bus_hz % slot->clock)
+ div = host->bus_hz / slot->clock;
+ if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
/*
* move the + 1 after the divide to prevent
* over-clocking the card.
*/
- div = ((host->bus_hz / slot->clock) >> 1) + 1;
- else
- div = (host->bus_hz / slot->clock) >> 1;
+ div += 1;
+
+ div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0;
dev_info(&slot->mmc->class_dev,
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
mdelay(20);
if (cmd->data) {
- host->data = NULL;
dw_mci_stop_dma(host);
+ host->data = NULL;
}
}
}
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
host->dma_ops->complete(host);
}
#endif
#ifdef CONFIG_MMC_DW_IDMAC
ctrl = mci_readl(host, BMOD);
- ctrl |= 0x01; /* Software reset of DMA */
+ /* Software reset of DMA */
+ ctrl |= SDMMC_IDMAC_SWRESET;
mci_writel(host, BMOD, ctrl);
#endif
spin_lock_init(&host->lock);
INIT_LIST_HEAD(&host->queue);
-
- host->dma_ops = host->pdata->dma_ops;
- dw_mci_init_dma(host);
-
/*
* Get the host data width - this assumes that HCON has been set with
* the correct values.
}
/* Reset all blocks */
- if (!mci_wait_reset(&host->dev, host)) {
- ret = -ENODEV;
- goto err_dmaunmap;
- }
+ if (!mci_wait_reset(&host->dev, host))
+ return -ENODEV;
+
+ host->dma_ops = host->pdata->dma_ops;
+ dw_mci_init_dma(host);
/* Clear the interrupts for the host controller */
mci_writel(host, RINTSTS, 0xFFFFFFFF);
if (host->vmmc)
regulator_enable(host->vmmc);
- if (host->dma_ops->init)
- host->dma_ops->init(host);
-
if (!mci_wait_reset(&host->dev, host)) {
ret = -ENODEV;
return ret;
}
+ if (host->dma_ops->init)
+ host->dma_ops->init(host);
+
/* Restore the old value at FIFOTH register */
mci_writel(host, FIFOTH, host->fifoth_val);
int bus_width = 0;
pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
- if (!pdata->gpio_wp)
- pdata->gpio_wp = -1;
-
pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
- if (!pdata->gpio_cd)
- pdata->gpio_cd = -1;
if (of_get_property(np, "cd-inverted", NULL))
pdata->cd_invert = true;
return -EINVAL;
}
+ if (!plat) {
+ plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+ }
+
if (np)
mmci_dt_populate_generic_pdata(np, plat);
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
+ if (plat->gpio_cd == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_cd;
+ }
if (gpio_is_valid(plat->gpio_cd)) {
ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
if (ret == 0)
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
+ if (plat->gpio_wp == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_wp;
+ }
if (gpio_is_valid(plat->gpio_wp)) {
ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
if (ret == 0)
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &mxs_mmc_pm_ops,
- .of_match_table = mxs_mmc_dt_ids,
#endif
+ .of_match_table = mxs_mmc_dt_ids,
},
};
.set_ios = mmc_omap_set_ios,
};
-static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
+static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
{
struct mmc_omap_slot *slot = NULL;
struct mmc_host *mmc;
}
host->nr_slots = pdata->nr_slots;
+ host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+
+ host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
+ if (!host->mmc_omap_wq)
+ goto err_plat_cleanup;
+
for (i = 0; i < pdata->nr_slots; i++) {
ret = mmc_omap_new_slot(host, i);
if (ret < 0) {
while (--i >= 0)
mmc_omap_remove_slot(host->slots[i]);
- goto err_plat_cleanup;
+ goto err_destroy_wq;
}
}
- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
-
- host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
- if (!host->mmc_omap_wq)
- goto err_plat_cleanup;
-
return 0;
+err_destroy_wq:
+ destroy_workqueue(host->mmc_omap_wq);
err_plat_cleanup:
if (pdata->cleanup)
pdata->cleanup(&pdev->dev);
#define BRR_ENABLE (1 << 5)
#define DTO_ENABLE (1 << 20)
#define INIT_STREAM (1 << 1)
-#define ACEN_ACMD12 (1 << 2)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
#define DMA_EN 0x1
#define OMAP_MMC_MAX_CLOCK 52000000
#define DRIVER_NAME "omap_hsmmc"
-#define AUTO_CMD12 (1 << 0) /* Auto CMD12 support */
/*
* One controller can have multiple slots, like on some omap boards using
* omap.c controller driver. Luckily this is not currently done on any known
int reqs_blocked;
int use_reg;
int req_in_progress;
- unsigned int flags;
struct omap_hsmmc_next next_data;
struct omap_mmc_platform_data *pdata;
cmdtype = 0x3;
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
- if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
- cmdreg |= ACEN_ACMD12;
if (data) {
cmdreg |= DP_SELECT | MSBS | BCE;
else
data->bytes_xfered = 0;
- if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
- omap_hsmmc_start_command(host, data->stop, NULL);
- } else {
- if (data->stop)
- data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
- RSP76);
+ if (!data->stop) {
omap_hsmmc_request_done(host, data->mrq);
+ return;
}
+ omap_hsmmc_start_command(host, data->stop, NULL);
}
/*
host->mapbase = res->start + pdata->reg_offset;
host->base = ioremap(host->mapbase, SZ_4K);
host->power_mode = MMC_POWER_OFF;
- host->flags = AUTO_CMD12;
host->next_data.cookie = 1;
platform_set_drvdata(pdev, host);
if (sc->ext_cd_irq &&
request_threaded_irq(sc->ext_cd_irq, NULL,
sdhci_s3c_gpio_card_detect_thread,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), sc) == 0) {
int status = gpio_get_value(sc->ext_cd_gpio);
if (pdata->ext_cd_gpio_invert)
* Support of SDHCI platform devices for spear soc family
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired by sdhci-pltfm.c
*
module_platform_driver(sdhci_driver);
MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_LICENSE("GPL v2");
}
if (count >= 0xF) {
- pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n",
- mmc_hostname(host->mmc), count, cmd->opcode);
+ DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
+ mmc_hostname(host->mmc), count, cmd->opcode);
count = 0xE;
}
}
static void mtdoops_do_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
struct mtdoops_context *cxt = container_of(dumper,
struct mtdoops_context, dump);
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- char *dst;
-
- if (reason != KMSG_DUMP_OOPS &&
- reason != KMSG_DUMP_PANIC)
- return;
/* Only dump oopses if dump_oops is set */
if (reason == KMSG_DUMP_OOPS && !dump_oops)
return;
- dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */
- l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE);
- l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy);
-
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
+ kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
+ record_size - MTDOOPS_HEADER_SIZE, NULL);
/* Panics must be written immediately */
if (reason != KMSG_DUMP_OOPS)
return;
}
+ cxt->dump.max_reason = KMSG_DUMP_OOPS;
cxt->dump.dump = mtdoops_do_dump;
err = kmsg_dump_register(&cxt->dump);
if (err) {
*/
int ubi_debugfs_init(void)
{
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
dfs_rootdir = debugfs_create_dir("ubi", NULL);
*/
void ubi_debugfs_exit(void)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove(dfs_rootdir);
}
struct dentry *dent;
struct ubi_debug_info *d = ubi->dbg;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
n = snprintf(d->dfs_dir_name, UBI_DFS_DIR_LEN + 1, UBI_DFS_DIR_NAME,
*/
void ubi_debugfs_exit_dev(struct ubi_device *ubi)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(ubi->dbg->dfs_dir);
}
*/
memcpy(rx_buf, (u8 *)piggy_desc,
CFHSI_DESC_SHORT_SZ);
- /* Mark no embedded frame here */
- piggy_desc->offset = 0;
if (desc_pld_len == -EPROTO)
goto out_of_sync;
}
/* Extract any payload in piggyback descriptor. */
if (cfhsi_rx_desc(piggy_desc, cfhsi) < 0)
goto out_of_sync;
+ /* Mark no embedded frame after extracting it */
+ piggy_desc->offset = 0;
}
}
dev_err(&ndev->dev, "%s: Registration error: %d.\n",
__func__, res);
free_netdev(ndev);
+ return -ENODEV;
}
/* Add CAIF HSI device to list. */
spin_lock(&cfhsi_list_lock);
return PTR_ERR(pinctrl);
if (pdev->dev.of_node) {
- const u32 *clock_freq_p;
+ const __be32 *clock_freq_p;
clock_freq_p = of_get_property(pdev->dev.of_node,
"clock-frequency", NULL);
if (clock_freq_p)
- clock_freq = *clock_freq_p;
+ clock_freq = be32_to_cpup(clock_freq_p);
}
if (!clock_freq) {
if (priv->mode == MQ_MG_MODE) {
baddr = ®s->txic0;
for_each_set_bit(i, &tx_mask, priv->num_tx_queues) {
- if (likely(priv->tx_queue[i]->txcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->tx_queue[i]->txcoalescing))
gfar_write(baddr + i, priv->tx_queue[i]->txic);
- }
}
baddr = ®s->rxic0;
for_each_set_bit(i, &rx_mask, priv->num_rx_queues) {
- if (likely(priv->rx_queue[i]->rxcoalescing)) {
- gfar_write(baddr + i, 0);
+ gfar_write(baddr + i, 0);
+ if (likely(priv->rx_queue[i]->rxcoalescing))
gfar_write(baddr + i, priv->rx_queue[i]->rxic);
- }
}
}
}
__IXGBE_HANG_CHECK_ARMED,
__IXGBE_RX_RSC_ENABLED,
__IXGBE_RX_CSUM_UDP_ZERO_ERR,
- __IXGBE_RX_FCOE_BUFSZ,
+ __IXGBE_RX_FCOE,
};
#define check_for_tx_hang(ring) \
#if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192)
static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring)
{
- return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0;
+ return test_bit(__IXGBE_RX_FCOE, &ring->state) ? 1 : 0;
}
#else
#define ixgbe_rx_pg_order(_ring) 0
f = &adapter->ring_feature[RING_F_FCOE];
if ((rxr_idx >= f->mask) &&
(rxr_idx < f->mask + f->indices))
- set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state);
+ set_bit(__IXGBE_RX_FCOE, &ring->state);
}
#endif /* IXGBE_FCOE */
#ifdef IXGBE_FCOE
/**
* ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
- * @adapter: address of board private structure
+ * @ring: structure containing ring specific data
* @rx_desc: advanced rx descriptor
*
* Returns : true if it is FCoE pkt
*/
-static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter,
+static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring,
union ixgbe_adv_rx_desc *rx_desc)
{
__le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
- return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+ return test_bit(__IXGBE_RX_FCOE, &ring->state) &&
((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) ==
(cpu_to_le16(IXGBE_ETQF_FILTER_FCOE <<
IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT)));
skb->truesize -= ixgbe_rx_bufsz(rx_ring);
}
+#ifdef IXGBE_FCOE
+ /* do not attempt to pad FCoE Frames as this will disrupt DDP */
+ if (ixgbe_rx_is_fcoe(rx_ring, rx_desc))
+ return false;
+
+#endif
/* if skb_pad returns an error the skb was freed */
if (unlikely(skb->len < 60)) {
int pad_len = 60 - skb->len;
#ifdef IXGBE_FCOE
/* if ddp, not passing to ULD unless for FCP_RSP or error */
- if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
+ if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) {
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
if (!ddp_bytes) {
dev_kfree_skb_any(skb);
if (priv->rx_cq[i].buf)
mlx4_en_destroy_cq(priv, &priv->rx_cq[i]);
}
+
+ if (priv->base_tx_qpn) {
+ mlx4_qp_release_range(priv->mdev->dev, priv->base_tx_qpn, priv->tx_ring_num);
+ priv->base_tx_qpn = 0;
+ }
}
int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
{
struct mlx4_en_port_profile *prof = priv->prof;
int i;
- int base_tx_qpn, err;
+ int err;
- err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &base_tx_qpn);
+ err = mlx4_qp_reserve_range(priv->mdev->dev, priv->tx_ring_num, 256, &priv->base_tx_qpn);
if (err) {
en_err(priv, "failed reserving range for TX rings\n");
return err;
prof->tx_ring_size, i, TX))
goto err;
- if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], base_tx_qpn + i,
+ if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], priv->base_tx_qpn + i,
prof->tx_ring_size, TXBB_SIZE))
goto err;
}
err:
en_err(priv, "Failed to allocate NIC resources\n");
- mlx4_qp_release_range(priv->mdev->dev, base_tx_qpn, priv->tx_ring_num);
return -ENOMEM;
}
en_warn(priv, "Using %d RX rings\n", prof->rx_ring_num);
/* Configure port */
+ mlx4_en_calc_rx_buf(dev);
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
- MLX4_EN_MIN_MTU,
- 0, 0, 0, 0);
+ priv->rx_skb_size + ETH_FCS_LEN,
+ prof->tx_pause, prof->tx_ppp,
+ prof->rx_pause, prof->rx_ppp);
if (err) {
en_err(priv, "Failed setting port general configurations "
"for port %d, with error %d\n", priv->port, err);
if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) &&
!mlx4_is_mfunc(dev)) {
dev->flags &= ~MLX4_FLAG_MSI_X;
+ dev->caps.num_comp_vectors = 1;
+ dev->caps.comp_pool = 0;
pci_disable_msix(pdev);
err = mlx4_setup_hca(dev);
}
int vids[128];
bool wol;
struct device *ddev;
+ int base_tx_qpn;
#ifdef CONFIG_MLX4_EN_DCB
struct ieee_ets ets;
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/device.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/dma-mapping.h>
#define USB_PRODUCT_IPHONE_3G 0x1292
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
+#define USB_PRODUCT_IPAD 0x129a
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
#define USB_PRODUCT_IPHONE_4S 0x12a0
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPAD,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ USB_DEVICE_AND_INTERFACE_INFO(
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
{
struct usbnet *dev = usb_get_intfdata(intf);
+
+ /* can be called while disconnecting */
+ if (!dev)
+ return 0;
return qmi_wwan_manage_power(dev, on);
}
u32 keymax;
DECLARE_BITMAP(keymap, ATH_KEYMAX);
DECLARE_BITMAP(tkip_keymap, ATH_KEYMAX);
+ DECLARE_BITMAP(ccmp_keymap, ATH_KEYMAX);
enum ath_crypt_caps crypt_caps;
unsigned int clockrate;
if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_AUTO) {
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI ||
- ((AR_SREV_9160(ah) || AR_SREV_9280(ah)) &&
+ ((AR_SREV_9160(ah) || AR_SREV_9280(ah) || AR_SREV_9287(ah)) &&
!ah->is_pciexpress)) {
ah->config.serialize_regmode =
SER_REG_MODE_ON;
__skb_unlink(skb, &rx_edma->rx_fifo);
list_add_tail(&bf->list, &sc->rx.rxbuf);
ath_rx_edma_buf_link(sc, qtype);
- } else {
- bf = NULL;
}
+
+ bf = NULL;
}
*dest = bf;
* descriptor does contain a valid key index. This has been observed
* mostly with CCMP encryption.
*/
- if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID)
+ if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
+ !test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
if (!rx_stats->rs_datalen) {
return -EIO;
set_bit(idx, common->keymap);
+ if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+ set_bit(idx, common->ccmp_keymap);
+
if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
set_bit(idx + 64, common->keymap);
set_bit(idx, common->tkip_keymap);
return;
clear_bit(key->hw_key_idx, common->keymap);
+ clear_bit(key->hw_key_idx, common->ccmp_keymap);
if (key->cipher != WLAN_CIPHER_SUITE_TKIP)
return;
if (prev_status >= B43_STAT_STARTED) {
err = b43_wireless_core_start(up_dev);
if (err) {
- b43err(wl, "Fatal: Coult not start device for "
+ b43err(wl, "Fatal: Could not start device for "
"selected %s-GHz band\n",
band_to_string(chan->band));
b43_wireless_core_exit(up_dev);
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(up_dev);
if (err) {
- b43legacyerr(wl, "Fatal: Coult not start device for "
+ b43legacyerr(wl, "Fatal: Could not start device for "
"newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
b43legacy_wireless_core_exit(up_dev);
switch (op) {
case ADD:
ret = iwlagn_mac_sta_add(hw, vif, sta);
+ if (ret)
+ break;
+ /*
+ * Clear the in-progress flag, the AP station entry was added
+ * but we'll initialize LQ only when we've associated (which
+ * would also clear the in-progress flag). This is necessary
+ * in case we never initialize LQ because association fails.
+ */
+ spin_lock_bh(&priv->sta_lock);
+ priv->stations[iwl_sta_id(sta)].used &=
+ ~IWL_STA_UCODE_INPROGRESS;
+ spin_unlock_bh(&priv->sta_lock);
break;
case REMOVE:
ret = iwlagn_mac_sta_remove(hw, vif, sta);
else
last_seq = priv->rx_seq[tid];
- if (last_seq >= new_node->start_win)
+ if (last_seq != MWIFIEX_DEF_11N_RX_SEQ_NUM &&
+ last_seq >= new_node->start_win)
new_node->start_win = last_seq + 1;
new_node->win_size = win_size;
spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
- memset(priv->rx_seq, 0, sizeof(priv->rx_seq));
+ mwifiex_reset_11n_rx_seq_num(priv);
}
#define ADDBA_RSP_STATUS_ACCEPT 0
+#define MWIFIEX_DEF_11N_RX_SEQ_NUM 0xffff
+
+static inline void mwifiex_reset_11n_rx_seq_num(struct mwifiex_private *priv)
+{
+ memset(priv->rx_seq, 0xff, sizeof(priv->rx_seq));
+}
+
int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *,
u16 seqNum,
u16 tid, u8 *ta,
/* save assoc resp ie index after auto-indexing */
*assoc_idx = *((u16 *)pos);
+ kfree(ap_custom_ie);
return ret;
}
dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
adapter->event_cause = *(u32 *) skb->data;
- skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN);
-
if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE))
- memcpy(adapter->event_body, skb->data, skb->len);
+ memcpy(adapter->event_body,
+ skb->data + MWIFIEX_EVENT_HEADER_LEN,
+ skb->len);
/* event cause has been saved to adapter->event_cause */
adapter->event_received = true;
break;
case EVENT_UAP_STA_ASSOC:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
memset(&sinfo, 0, sizeof(sinfo));
- event = (struct mwifiex_assoc_event *)adapter->event_skb->data;
+ event = (struct mwifiex_assoc_event *)
+ (adapter->event_body + MWIFIEX_UAP_EVENT_EXTRA_HEADER);
if (le16_to_cpu(event->type) == TLV_TYPE_UAP_MGMT_FRAME) {
len = -1;
GFP_KERNEL);
break;
case EVENT_UAP_STA_DEAUTH:
- skb_pull(adapter->event_skb, MWIFIEX_UAP_EVENT_EXTRA_HEADER);
- cfg80211_del_sta(priv->netdev, adapter->event_skb->data,
- GFP_KERNEL);
+ cfg80211_del_sta(priv->netdev, adapter->event_body +
+ MWIFIEX_UAP_EVENT_EXTRA_HEADER, GFP_KERNEL);
break;
case EVENT_UAP_BSS_IDLE:
priv->media_connected = false;
struct device *dev = adapter->dev;
u32 recv_type;
__le32 tmp;
+ int ret;
if (adapter->hs_activated)
mwifiex_process_hs_config(adapter);
case MWIFIEX_USB_TYPE_CMD:
if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) {
dev_err(dev, "CMD: skb->len too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
} else if (!adapter->curr_cmd) {
dev_dbg(dev, "CMD: no curr_cmd\n");
if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
mwifiex_process_sleep_confirm_resp(
adapter, skb->data,
skb->len);
- return 0;
+ ret = 0;
+ goto exit_restore_skb;
}
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
adapter->curr_cmd->resp_skb = skb;
case MWIFIEX_USB_TYPE_EVENT:
if (skb->len < sizeof(u32)) {
dev_err(dev, "EVENT: skb->len too small\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
skb_copy_from_linear_data(skb, &tmp, sizeof(u32));
adapter->event_cause = le32_to_cpu(tmp);
- skb_pull(skb, sizeof(u32));
dev_dbg(dev, "event_cause %#x\n", adapter->event_cause);
if (skb->len > MAX_EVENT_SIZE) {
dev_err(dev, "EVENT: event body too large\n");
- return -1;
+ ret = -1;
+ goto exit_restore_skb;
}
- skb_copy_from_linear_data(skb, adapter->event_body,
- skb->len);
+ memcpy(adapter->event_body, skb->data +
+ MWIFIEX_EVENT_HEADER_LEN, skb->len);
+
adapter->event_received = true;
adapter->event_skb = skb;
break;
}
return -EINPROGRESS;
+
+exit_restore_skb:
+ /* The buffer will be reused for further cmds/events */
+ skb_push(skb, INTF_HEADER_LEN);
+
+ return ret;
}
static void mwifiex_usb_rx_complete(struct urb *urb)
priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE;
priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE;
+ mwifiex_reset_11n_rx_seq_num(priv);
+
atomic_set(&priv->wmm.tx_pkts_queued, 0);
atomic_set(&priv->wmm.highest_queued_prio, HIGH_PRIO_TID);
}
if (!ptr->is_11n_enabled ||
mwifiex_is_ba_stream_setup(priv, ptr, tid) ||
+ priv->wps.session_enable ||
((priv->sec_info.wpa_enabled ||
priv->sec_info.wpa2_enabled) &&
!priv->wpa_is_gtk_set)) {
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
+ {RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
+ {RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
/* HP - Lite-On ,8188CUS Slim Combo */
{RTL_USB_DEVICE(0x103c, 0x1629, rtl92cu_hal_cfg)},
{RTL_USB_DEVICE(0x13d3, 0x3357, rtl92cu_hal_cfg)}, /* AzureWave */
{RTL_USB_DEVICE(0x07b8, 0x8178, rtl92cu_hal_cfg)}, /*Funai -Abocom*/
{RTL_USB_DEVICE(0x0846, 0x9021, rtl92cu_hal_cfg)}, /*Netgear-Sercomm*/
{RTL_USB_DEVICE(0x0b05, 0x17ab, rtl92cu_hal_cfg)}, /*ASUS-Edimax*/
+ {RTL_USB_DEVICE(0x0bda, 0x8186, rtl92cu_hal_cfg)}, /*Realtek 92CE-VAU*/
{RTL_USB_DEVICE(0x0df6, 0x0061, rtl92cu_hal_cfg)}, /*Sitecom-Edimax*/
{RTL_USB_DEVICE(0x0e66, 0x0019, rtl92cu_hal_cfg)}, /*Hawking-Edimax*/
{RTL_USB_DEVICE(0x2001, 0x3307, rtl92cu_hal_cfg)}, /*D-Link-Cameo*/
config WLCORE
tristate "TI wlcore support"
depends on WL_TI && GENERIC_HARDIRQS && MAC80211
- depends on INET
select FW_LOADER
---help---
This module contains the main code for TI WLAN chips. It abstracts
dev_dbg(&dev->dev, "%s\n", dev->nodename);
- unregister_netdev(info->netdev);
-
xennet_disconnect_backend(info);
- del_timer_sync(&info->rx_refill_timer);
-
xennet_sysfs_delif(info->netdev);
+ unregister_netdev(info->netdev);
+
+ del_timer_sync(&info->rx_refill_timer);
+
free_percpu(info->stats);
free_netdev(info->netdev);
if (target_state == PCI_POWER_ERROR)
return -EIO;
+ /* Some devices mustn't be in D3 during system sleep */
+ if (target_state == PCI_D3hot &&
+ (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
+ return 0;
+
pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+/*
+ * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
+ * ASUS motherboards will cause memory corruption or a system crash
+ * if they are in D3 while the system is put into S3 sleep.
+ */
+static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
+{
+ const char *sys_info;
+ static const char good_Asus_board[] = "P8Z68-V";
+
+ if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
+ return;
+ if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
+ return;
+ sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+ if (sys_info && memcmp(sys_info, good_Asus_board,
+ sizeof(good_Asus_board) - 1) == 0)
+ return;
+
+ dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
+ device_set_wakeup_capable(&dev->dev, false);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
free_group:
if (!purecfg)
- free(group);
+ kfree(group);
free:
kfree(new_map);
return ret;
dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
- /* Handle this special glitch on altfunction C */
+ /*
+ * If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
+ * we may pass through an undesired state. In this case we take
+ * some extra care.
+ *
+ * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+ * - Save SLPM registers (since we have a shadow register in the
+ * nmk_chip we're using that as backup)
+ * - Set SLPM=0 for the IOs you want to switch and others to 1
+ * - Configure the GPIO registers for the IOs that are being switched
+ * - Set IOFORCE=1
+ * - Modify the AFLSA/B registers for the IOs that are being switched
+ * - Set IOFORCE=0
+ * - Restore SLPM registers
+ * - Any spurious wake up event during switch sequence to be ignored
+ * and cleared
+ *
+ * We REALLY need to save ALL slpm registers, because the external
+ * IOFORCE will switch *all* ports to their sleepmode setting to as
+ * to avoid glitches. (Not just one port!)
+ */
glitch = (g->altsetting == NMK_GPIO_ALT_C);
if (glitch) {
* Driver for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired from:
* - U300 Pinctl drivers
* Driver header file for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Driver for the ST Microelectronics SPEAr1310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear1310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr1340 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear1340_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr300 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear300_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr320 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear320_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Header file for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
static struct of_regulator_match ab8500_regulator_matches[] = {
- { .name = "LDO-AUX1", .driver_data = (void *) AB8500_LDO_AUX1, },
- { .name = "LDO-AUX2", .driver_data = (void *) AB8500_LDO_AUX2, },
- { .name = "LDO-AUX3", .driver_data = (void *) AB8500_LDO_AUX3, },
- { .name = "LDO-INTCORE", .driver_data = (void *) AB8500_LDO_INTCORE, },
- { .name = "LDO-TVOUT", .driver_data = (void *) AB8500_LDO_TVOUT, },
- { .name = "LDO-USB", .driver_data = (void *) AB8500_LDO_USB, },
- { .name = "LDO-AUDIO", .driver_data = (void *) AB8500_LDO_AUDIO, },
- { .name = "LDO-ANAMIC1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
- { .name = "LDO-ANAMIC2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
- { .name = "LDO-DMIC", .driver_data = (void *) AB8500_LDO_DMIC, },
- { .name = "LDO-ANA", .driver_data = (void *) AB8500_LDO_ANA, },
+ { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
+ { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
+ { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
+ { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
+ { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
+ { .name = "ab8500_ldo_usb", .driver_data = (void *) AB8500_LDO_USB, },
+ { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
+ { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
+ { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
+ { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
static __devinit int
}
static struct of_regulator_match db8500_regulator_matches[] = {
- { .name = "db8500-vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, },
- { .name = "db8500-varm", .driver_data = (void *) DB8500_REGULATOR_VARM, },
- { .name = "db8500-vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
- { .name = "db8500-vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, },
- { .name = "db8500-vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
- { .name = "db8500-vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
- { .name = "db8500-vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
- { .name = "db8500-vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, },
- { .name = "db8500-sva-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
- { .name = "db8500-sva-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
- { .name = "db8500-sva-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
- { .name = "db8500-sia-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
- { .name = "db8500-sia-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
- { .name = "db8500-sia-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
- { .name = "db8500-sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
- { .name = "db8500-b2r2-mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
- { .name = "db8500-esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
- { .name = "db8500-esram12-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
- { .name = "db8500-esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
- { .name = "db8500-esram34-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
+ { .name = "db8500_vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, },
+ { .name = "db8500_varm", .driver_data = (void *) DB8500_REGULATOR_VARM, },
+ { .name = "db8500_vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
+ { .name = "db8500_vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, },
+ { .name = "db8500_vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
+ { .name = "db8500_vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
+ { .name = "db8500_vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
+ { .name = "db8500_vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, },
+ { .name = "db8500_sva_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
+ { .name = "db8500_sva_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
+ { .name = "db8500_sva_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
+ { .name = "db8500_sia_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
+ { .name = "db8500_sia_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
+ { .name = "db8500_sia_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
+ { .name = "db8500_sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
+ { .name = "db8500_b2r2_mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
+ { .name = "db8500_esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
+ { .name = "db8500_esram12_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
+ { .name = "db8500_esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
+ { .name = "db8500_esram34_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
};
static __devinit int
pmic->desc[id].ops = &palmas_ops_smps10;
pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
pmic->desc[id].vsel_mask = SMPS10_VSEL;
- pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+ pmic->desc[id].enable_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_STATUS);
pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
}
pmic->desc[id].type = REGULATOR_VOLTAGE;
pmic->desc[id].owner = THIS_MODULE;
- pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+ pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
+ palmas_regs_info[id].ctrl_addr);
pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
if (pdata && pdata->reg_data)
desc = reg_voltage_map[reg_id];
- if (old_sel < new_sel)
+ if ((old_sel < new_sel) && s5m8767->ramp_delay)
return DIV_ROUND_UP(desc->step * (new_sel - old_sel),
s5m8767->ramp_delay * 1000);
return 0;
/* LDO_CTRL bitfields */
#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4)
-#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x0F << ((ldo_id)*4))
+#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x07 << ((ldo_id)*4))
/* Number of step-down converters available */
#define TPS65023_NUM_DCDC 3
info = &supply_info[rdev_get_id(rdev)];
if (info->flags & FIXED_VOLTAGE)
- return info->fixed_voltage;
+ return 0;
ret = read_field(hw, &info->voltage);
if (ret < 0)
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret) {
- dev_err(pdev->dev.parent, "dma_set_coherent_mask: %d\n", ret);
+ dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
return ret;
}
}
if (offset + filesz > len) {
- dev_err(dev, "truncated fw: need 0x%x avail 0x%x\n",
+ dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
offset + filesz, len);
ret = -EINVAL;
break;
unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
if (unmapped != entry->len) {
/* nothing much to do besides complaining */
- dev_err(dev, "failed to unmap %u/%u\n", entry->len,
+ dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
unmapped);
}
ehdr = (struct elf32_hdr *)fw->data;
- dev_info(dev, "Booting fw image %s, size %d\n", name, fw->size);
+ dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
/*
* if enabling an IOMMU isn't relevant for this rproc, this is
/* look for the resource table */
table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz);
- if (!table)
+ if (!table) {
+ ret = -EINVAL;
goto clean_up;
+ }
/* handle fw resources which are required to boot rproc */
ret = rproc_handle_boot_rsc(rproc, table, tablesz);
static inline u8
_base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
{
- return ioc->cpu_msix_table[smp_processor_id()];
+ return ioc->cpu_msix_table[raw_smp_processor_id()];
}
/**
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
}
cmd = qlt_ctio_to_cmd(vha, handle, ctio);
- if (cmd == NULL) {
- if (status != CTIO_SUCCESS)
- qlt_term_ctio_exchange(vha, ctio, NULL, status);
+ if (cmd == NULL)
return;
- }
+
se_cmd = &cmd->se_cmd;
tfo = se_cmd->se_tfo;
out_term:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf020, "Terminating work cmd %p", cmd);
/*
- * cmd has not sent to target yet, so pass NULL as the second argument
+ * cmd has not sent to target yet, so pass NULL as the second
+ * argument to qlt_send_term_exchange() and free the memory here.
*/
spin_lock_irqsave(&ha->hardware_lock, flags);
qlt_send_term_exchange(vha, NULL, &cmd->atio, 1);
+ kmem_cache_free(qla_tgt_cmd_cachep, cmd);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (sess)
ha->tgt.tgt_ops->put_sess(sess);
#define QLA_TGT_XMIT_STATUS 2
#define QLA_TGT_XMIT_ALL (QLA_TGT_XMIT_STATUS|QLA_TGT_XMIT_DATA)
-#include <linux/version.h>
extern struct qla_tgt_data qla_target;
/*
*/
static int tcm_qla2xxx_npiv_extract_wwn(const char *ns, u64 *nm)
{
- unsigned int i, j, value;
+ unsigned int i, j;
u8 wwn[8];
memset(wwn, 0, sizeof(wwn));
/* Validate and store the new name */
for (i = 0, j = 0; i < 16; i++) {
+ int value;
+
value = hex_to_bin(*ns++);
if (value >= 0)
j = (j << 4) | value;
/*
* Called from qla_target.c:qlt_issue_task_mgmt()
*/
-int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun,
- uint8_t tmr_func, uint32_t tag)
+static int tcm_qla2xxx_handle_tmr(struct qla_tgt_mgmt_cmd *mcmd, uint32_t lun,
+ uint8_t tmr_func, uint32_t tag)
{
struct qla_tgt_sess *sess = mcmd->sess;
struct se_cmd *se_cmd = &mcmd->se_cmd;
struct target_fabric_configfs *tcm_qla2xxx_fabric_configfs;
struct target_fabric_configfs *tcm_qla2xxx_npiv_fabric_configfs;
-static int tcm_qla2xxx_setup_nacl_from_rport(
- struct se_portal_group *se_tpg,
- struct se_node_acl *se_nacl,
- struct tcm_qla2xxx_lport *lport,
- struct tcm_qla2xxx_nacl *nacl,
- u64 rport_wwnn)
-{
- struct scsi_qla_host *vha = lport->qla_vha;
- struct Scsi_Host *sh = vha->host;
- struct fc_host_attrs *fc_host = shost_to_fc_host(sh);
- struct fc_rport *rport;
- unsigned long flags;
- void *node;
- int rc;
-
- /*
- * Scan the existing rports, and create a session for the
- * explict NodeACL is an matching rport->node_name already
- * exists.
- */
- spin_lock_irqsave(sh->host_lock, flags);
- list_for_each_entry(rport, &fc_host->rports, peers) {
- if (rport_wwnn != rport->node_name)
- continue;
-
- pr_debug("Located existing rport_wwpn and rport->node_name: 0x%016LX, port_id: 0x%04x\n",
- rport->node_name, rport->port_id);
- nacl->nport_id = rport->port_id;
-
- spin_unlock_irqrestore(sh->host_lock, flags);
-
- spin_lock_irqsave(&vha->hw->hardware_lock, flags);
- node = btree_lookup32(&lport->lport_fcport_map, rport->port_id);
- if (node) {
- rc = btree_update32(&lport->lport_fcport_map,
- rport->port_id, se_nacl);
- } else {
- rc = btree_insert32(&lport->lport_fcport_map,
- rport->port_id, se_nacl,
- GFP_ATOMIC);
- }
- spin_unlock_irqrestore(&vha->hw->hardware_lock, flags);
-
- if (rc) {
- pr_err("Unable to insert se_nacl into fcport_map");
- WARN_ON(rc > 0);
- return rc;
- }
-
- pr_debug("Inserted into fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%08x\n",
- se_nacl, rport_wwnn, nacl->nport_id);
-
- return 1;
- }
- spin_unlock_irqrestore(sh->host_lock, flags);
-
- return 0;
-}
-
+static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *,
+ struct tcm_qla2xxx_nacl *, struct qla_tgt_sess *);
/*
* Expected to be called with struct qla_hw_data->hardware_lock held
*/
pr_debug("Removed from fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%06x\n",
se_nacl, nacl->nport_wwnn, nacl->nport_id);
+ /*
+ * Now clear the se_nacl and session pointers from our HW lport lookup
+ * table mapping for this initiator's fabric S_ID and LOOP_ID entries.
+ *
+ * This is done ahead of callbacks into tcm_qla2xxx_free_session() ->
+ * target_wait_for_sess_cmds() before the session waits for outstanding
+ * I/O to complete, to avoid a race between session shutdown execution
+ * and incoming ATIOs or TMRs picking up a stale se_node_act reference.
+ */
+ tcm_qla2xxx_clear_sess_lookup(lport, nacl, sess);
+}
+
+static void tcm_qla2xxx_release_session(struct kref *kref)
+{
+ struct se_session *se_sess = container_of(kref,
+ struct se_session, sess_kref);
+
+ qlt_unreg_sess(se_sess->fabric_sess_ptr);
+}
+
+static void tcm_qla2xxx_put_session(struct se_session *se_sess)
+{
+ struct qla_tgt_sess *sess = se_sess->fabric_sess_ptr;
+ struct qla_hw_data *ha = sess->vha->hw;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ kref_put(&se_sess->sess_kref, tcm_qla2xxx_release_session);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
static void tcm_qla2xxx_put_sess(struct qla_tgt_sess *sess)
{
- target_put_session(sess->se_sess);
+ tcm_qla2xxx_put_session(sess->se_sess);
}
static void tcm_qla2xxx_shutdown_sess(struct qla_tgt_sess *sess)
struct config_group *group,
const char *name)
{
- struct se_wwn *se_wwn = se_tpg->se_tpg_wwn;
- struct tcm_qla2xxx_lport *lport = container_of(se_wwn,
- struct tcm_qla2xxx_lport, lport_wwn);
struct se_node_acl *se_nacl, *se_nacl_new;
struct tcm_qla2xxx_nacl *nacl;
u64 wwnn;
u32 qla2xxx_nexus_depth;
- int rc;
if (tcm_qla2xxx_parse_wwn(name, &wwnn, 1) < 0)
return ERR_PTR(-EINVAL);
nacl = container_of(se_nacl, struct tcm_qla2xxx_nacl, se_node_acl);
nacl->nport_wwnn = wwnn;
tcm_qla2xxx_format_wwn(&nacl->nport_name[0], TCM_QLA2XXX_NAMELEN, wwnn);
- /*
- * Setup a se_nacl handle based on an a matching struct fc_rport setup
- * via drivers/scsi/qla2xxx/qla_init.c:qla2x00_reg_remote_port()
- */
- rc = tcm_qla2xxx_setup_nacl_from_rport(se_tpg, se_nacl, lport,
- nacl, wwnn);
- if (rc < 0) {
- tcm_qla2xxx_release_fabric_acl(se_tpg, se_nacl_new);
- return ERR_PTR(rc);
- }
return se_nacl;
}
nacl->qla_tgt_sess, new_se_nacl, new_se_nacl->initiatorname);
}
+/*
+ * Should always be called with qla_hw_data->hardware_lock held.
+ */
+static void tcm_qla2xxx_clear_sess_lookup(struct tcm_qla2xxx_lport *lport,
+ struct tcm_qla2xxx_nacl *nacl, struct qla_tgt_sess *sess)
+{
+ struct se_session *se_sess = sess->se_sess;
+ unsigned char be_sid[3];
+
+ be_sid[0] = sess->s_id.b.domain;
+ be_sid[1] = sess->s_id.b.area;
+ be_sid[2] = sess->s_id.b.al_pa;
+
+ tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess,
+ sess, be_sid);
+ tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess,
+ sess, sess->loop_id);
+}
+
static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess)
{
struct qla_tgt *tgt = sess->tgt;
struct se_node_acl *se_nacl;
struct tcm_qla2xxx_lport *lport;
struct tcm_qla2xxx_nacl *nacl;
- unsigned char be_sid[3];
- unsigned long flags;
BUG_ON(in_interrupt());
return;
}
target_wait_for_sess_cmds(se_sess, 0);
- /*
- * And now clear the se_nacl and session pointers from our HW lport
- * mappings for fabric S_ID and LOOP_ID.
- */
- memset(&be_sid, 0, 3);
- be_sid[0] = sess->s_id.b.domain;
- be_sid[1] = sess->s_id.b.area;
- be_sid[2] = sess->s_id.b.al_pa;
-
- spin_lock_irqsave(&ha->hardware_lock, flags);
- tcm_qla2xxx_set_sess_by_s_id(lport, NULL, nacl, se_sess,
- sess, be_sid);
- tcm_qla2xxx_set_sess_by_loop_id(lport, NULL, nacl, se_sess,
- sess, sess->loop_id);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
transport_deregister_session_configfs(sess->se_sess);
transport_deregister_session(sess->se_sess);
.new_cmd_map = NULL,
.check_stop_free = tcm_qla2xxx_check_stop_free,
.release_cmd = tcm_qla2xxx_release_cmd,
+ .put_session = tcm_qla2xxx_put_session,
.shutdown_session = tcm_qla2xxx_shutdown_session,
.close_session = tcm_qla2xxx_close_session,
.sess_get_index = tcm_qla2xxx_sess_get_index,
.tpg_release_fabric_acl = tcm_qla2xxx_release_fabric_acl,
.tpg_get_inst_index = tcm_qla2xxx_tpg_get_inst_index,
.release_cmd = tcm_qla2xxx_release_cmd,
+ .put_session = tcm_qla2xxx_put_session,
.shutdown_session = tcm_qla2xxx_shutdown_session,
.close_session = tcm_qla2xxx_close_session,
.sess_get_index = tcm_qla2xxx_sess_get_index,
EXPORT_SYMBOL(scsi_logging_level);
#endif
-#if IS_ENABLED(CONFIG_PM) || IS_ENABLED(CONFIG_BLK_DEV_SD)
-/* sd and scsi_pm need to coordinate flushing async actions */
+/* sd, scsi core and power management need to coordinate flushing async actions */
LIST_HEAD(scsi_sd_probe_domain);
EXPORT_SYMBOL(scsi_sd_probe_domain);
-#endif
/* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
* You may not alter any existing entry (although adding new ones is
{
if (sdp->host->max_cmd_len < 16)
return 0;
+ if (sdp->try_rc_10_first)
+ return 0;
if (sdp->scsi_level > SCSI_SPC_2)
return 1;
if (scsi_device_protection(sdp))
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
if (!cs) {
- cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL);
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
if (!cs)
return -ENOMEM;
cs->base = mcspi->base + spi->chip_select * 0x14;
cs = spi->controller_state;
list_del(&cs->node);
+ kfree(cs);
}
if (spi->chip_select < spi->master->num_chipselect) {
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/errno.h>
+#include <linux/kconfig.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fcntl.h>
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+#if IS_ENABLED(CONFIG_USB)
+
static int comedi_old_usb_auto_config(struct usb_interface *intf,
struct comedi_driver *driver)
{
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
+
+#endif
void netlink_exit(struct sock *sock)
{
- sock_release(sock->sk_socket);
+ netlink_kernel_release(sock);
}
int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len)
* info->driver_module:
Set to THIS_MODULE. Used to ensure correct ownership
of various resources allocate by the core.
- * info->num_interrupt_lines:
- Number of event triggering hardware lines the device has.
* info->event_attrs:
Attributes used to enable / disable hardware events.
* info->attrs:
config AD7298
tristate "Analog Devices AD7298 ADC driver"
depends on SPI
+ select IIO_KFIFO_BUF if IIO_BUFFER
help
Say yes here to build support for Analog Devices AD7298
8 Channel ADC with temperature sensor.
.indexed = 1, \
.channel = num, \
.address = num, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT, \
.scan_index = num, \
.scan_type = IIO_ST('s', 16, 16, 0), \
}
static struct lirc_serial hardware[] = {
[LIRC_HOMEBREW] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_HOMEBREW].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
},
[LIRC_IRDEO] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = UART_MCR_OUT2,
},
[LIRC_IRDEO_REMOTE] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IRDEO_REMOTE].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2),
},
[LIRC_ANIMAX] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_ANIMAX].lock),
.signal_pin = UART_MSR_DCD,
.signal_pin_change = UART_MSR_DDCD,
.on = 0,
},
[LIRC_IGOR] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_IGOR].lock),
.signal_pin = UART_MSR_DSR,
.signal_pin_change = UART_MSR_DDSR,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
* See also http://www.nslu2-linux.org for this device
*/
[LIRC_NSLU2] = {
+ .lock = __SPIN_LOCK_UNLOCKED(hardware[LIRC_NSLU2].lock),
.signal_pin = UART_MSR_CTS,
.signal_pin_change = UART_MSR_DCTS,
.on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR),
*/
ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
if (ret) {
- dev_err(dev->dev, "could not map (paddr)!\n");
+ dev_err(dev->dev,
+ "could not map (paddr)! Skipping framebuffer alloc\n");
ret = -ENOMEM;
goto fail;
}
fbi = helper->fbdev;
- unregister_framebuffer(fbi);
- framebuffer_release(fbi);
+ /* only cleanup framebuffer if it is present */
+ if (fbi) {
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+ }
drm_fb_helper_fini(helper);
/* - */
{USB_DEVICE(0x20F4, 0x646B)},
{USB_DEVICE(0x083A, 0xC512)},
+ {USB_DEVICE(0x25D4, 0x4CA1)},
+ {USB_DEVICE(0x25D4, 0x4CAB)},
/* RTL8191SU */
/* Realtek */
out:
transport_kunmap_data_sg(cmd);
- target_complete_cmd(cmd, GOOD);
- return 0;
+ if (!rc)
+ target_complete_cmd(cmd, GOOD);
+ return rc;
}
static inline int core_alua_state_nonoptimized(
}
EXPORT_SYMBOL(transport_register_session);
-static void target_release_session(struct kref *kref)
+void target_release_session(struct kref *kref)
{
struct se_session *se_sess = container_of(kref,
struct se_session, sess_kref);
void target_put_session(struct se_session *se_sess)
{
+ struct se_portal_group *tpg = se_sess->se_tpg;
+
+ if (tpg->se_tpg_tfo->put_session != NULL) {
+ tpg->se_tpg_tfo->put_session(se_sess);
+ return;
+ }
kref_put(&se_sess->sess_kref, target_release_session);
}
EXPORT_SYMBOL(target_put_session);
/* already configured */
if (info->intf != NULL)
return 0;
-
+ /*
+ * If the toolstack (or the hypervisor) hasn't set these values, the
+ * default value is 0. Even though mfn = 0 and evtchn = 0 are
+ * theoretically correct values, in practice they never are and they
+ * mean that a legacy toolstack hasn't initialized the pv console correctly.
+ */
r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
- if (r < 0) {
- kfree(info);
- return -ENODEV;
- }
+ if (r < 0 || v == 0)
+ goto err;
info->evtchn = v;
- hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
- if (r < 0) {
- kfree(info);
- return -ENODEV;
- }
+ v = 0;
+ r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
+ if (r < 0 || v == 0)
+ goto err;
mfn = v;
info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE);
- if (info->intf == NULL) {
- kfree(info);
- return -ENODEV;
- }
+ if (info->intf == NULL)
+ goto err;
info->vtermno = HVC_COOKIE;
spin_lock(&xencons_lock);
spin_unlock(&xencons_lock);
return 0;
+err:
+ kfree(info);
+ return -ENODEV;
}
static int xen_pv_console_init(void)
/**
* serial8250_register_8250_port - register a serial port
- * @port: serial port template
+ * @up: serial port template
*
* Configure the serial port specified by the request. If the
* port exists and is in use, it is hung up and unregistered
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
+ /* Two optional pin states - default & sleep */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_sleep;
const struct vendor_data *vendor;
unsigned int dmacr; /* dma control reg */
unsigned int im; /* interrupt mask */
unsigned int cr;
int retval;
+ /* Optionaly enable pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (retval)
+ dev_err(port->dev,
+ "could not set default pins\n");
+ }
+
retval = clk_prepare(uap->clk);
if (retval)
goto out;
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
+ int retval;
/*
* disable all interrupts
*/
clk_disable(uap->clk);
clk_unprepare(uap->clk);
+ /* Optionally let pins go into sleep states */
+ if (!IS_ERR(uap->pins_sleep)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
+ if (retval)
+ dev_err(port->dev,
+ "could not set pins to sleep state\n");
+ }
+
if (uap->port.dev->platform_data) {
struct amba_pl011_data *plat;
if (!uap)
return -ENODEV;
+ /* Allow pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (ret)
+ dev_err(uap->port.dev,
+ "could not set default pins\n");
+ }
+
ret = clk_prepare(uap->clk);
if (ret)
return ret;
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
- struct pinctrl *pinctrl;
void __iomem *base;
int i, ret;
goto free;
}
- pinctrl = devm_pinctrl_get_select_default(&dev->dev);
- if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(pinctrl);
+ uap->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(uap->pinctrl)) {
+ ret = PTR_ERR(uap->pinctrl);
goto unmap;
}
+ uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(uap->pins_default))
+ dev_err(&dev->dev, "could not get default pinstate\n");
+
+ uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_SLEEP);
+ if (IS_ERR(uap->pins_sleep))
+ dev_dbg(&dev->dev, "could not get sleep pinstate\n");
uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
spin_unlock_irqrestore(&up->port.lock, flags);
}
-#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
/*
* Wait for transmitter & holding register to empty
*/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB) += phy/
+obj-$(CONFIG_USB_COMMON) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
usb_autopm_put_interface(acm->control);
+ /*
+ * Unthrottle device in case the TTY was closed while throttled.
+ */
+ spin_lock_irq(&acm->read_lock);
+ acm->throttled = 0;
+ acm->throttle_req = 0;
+ spin_unlock_irq(&acm->read_lock);
+
if (acm_submit_read_urbs(acm, GFP_KERNEL))
goto error_submit_read_urbs;
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
},
+ {
+ /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = HUAWEI_VENDOR_ID,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
+ },
{ }
};
pci_save_state(pci_dev);
- /*
- * Some systems crash if an EHCI controller is in D3 during
- * a sleep transition. We have to leave such controllers in D0.
- */
- if (hcd->broken_pci_sleep) {
- dev_dbg(dev, "Staying in PCI D0\n");
- return retval;
- }
-
/* If the root hub is dead rather than suspended, disallow remote
* wakeup. usb_hc_died() should ensure that both hosts are marked as
* dying, so we only need to check the primary roothub.
return 0;
udev->lpm_disable_count++;
- if ((udev->u1_params.timeout == 0 && udev->u1_params.timeout == 0))
+ if ((udev->u1_params.timeout == 0 && udev->u2_params.timeout == 0))
return 0;
/* If LPM is enabled, attempt to disable it. */
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
- intf->intf_assoc = find_iad(dev, cp, i);
kref_get(&intfc->ref);
alt = usb_altnum_to_altsetting(intf, 0);
if (!alt)
alt = &intf->altsetting[0];
+ intf->intf_assoc =
+ find_iad(dev, cp, alt->desc.bInterfaceNumber);
intf->cur_altsetting = alt;
usb_enable_interface(dev, intf, true);
intf->dev.parent = &dev->dev;
if (r == req) {
/* wait until it is processed */
dwc3_stop_active_transfer(dwc, dep->number);
- goto out0;
+ goto out1;
}
dev_err(dwc->dev, "request %p was not queued to %s\n",
request, ep->name);
goto out0;
}
+out1:
/* giveback the request */
dwc3_gadget_giveback(dep, req, -ECONNRESET);
spin_lock_irqsave(&ep->udc->lock, flags);
- if (ep->ep.desc) {
- spin_unlock_irqrestore(&ep->udc->lock, flags);
- DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
- return -EBUSY;
- }
-
ep->ep.desc = desc;
ep->ep.maxpacket = maxpacket;
ep = container_of(_ep, struct qe_ep, ep);
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc || _ep->name == ep_name[0] ||
+ if (!_ep || !desc || _ep->name == ep_name[0] ||
(desc->bDescriptorType != USB_DT_ENDPOINT))
return -EINVAL;
#define USB_BUSMODE_DTB 0x02
/* Endpoint basic handle */
-#define ep_index(EP) ((EP)->desc->bEndpointAddress & 0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress & 0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN) == USB_DIR_IN)
/* ep0 transfer state */
ep = container_of(_ep, struct fsl_ep, ep);
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| (desc->bDescriptorType != USB_DT_ENDPOINT))
return -EINVAL;
/* for ep0: the desc defined here;
* for other eps, gadget layer called ep_enable with defined desc
*/
- udc_controller->eps[0].desc = &fsl_ep0_desc;
+ udc_controller->eps[0].ep.desc = &fsl_ep0_desc;
udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
/* setup the udc->eps[] for non-control endpoints and link
/*
* ### internal used help routines.
*/
-#define ep_index(EP) ((EP)->desc->bEndpointAddress&0xF)
+#define ep_index(EP) ((EP)->ep.desc->bEndpointAddress&0xF)
#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
#define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
- USB_DIR_IN ):((EP)->desc->bEndpointAddress \
+ USB_DIR_IN) : ((EP)->ep.desc->bEndpointAddress \
& USB_DIR_IN)==USB_DIR_IN)
#define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \
&udc->eps[pipe])
unsigned long flags;
ep = container_of(_ep, struct goku_ep, ep);
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
dev = ep->dev;
#include <mach/irqs.h>
#include <mach/board.h>
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+#include <linux/debugfs.h>
#include <linux/seq_file.h>
#endif
ep = container_of(_ep, struct mv_ep, ep);
udc = ep->udc;
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
u16 maxp;
/* catch various bogus parameters */
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->maxpacket < usb_endpoint_maxp(desc)) {
struct pxa25x_udc *dev;
ep = container_of (_ep, struct pxa25x_ep, ep);
- if (!_ep || !desc || ep->ep.desc || _ep->name == ep0name
+ if (!_ep || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->fifo_size < usb_endpoint_maxp (desc)) {
u32 ecr = 0;
hsep = our_ep(_ep);
- if (!_ep || !desc || hsep->ep.desc || _ep->name == ep0name
+ if (!_ep || !desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| hsep->bEndpointAddress != desc->bEndpointAddress
|| ep_maxpacket(hsep) < usb_endpoint_maxp(desc))
ep = to_s3c2410_ep(_ep);
- if (!_ep || !desc || ep->ep.desc
+ if (!_ep || !desc
|| _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
hw = ehci->async->hw;
hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */
+#endif
hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
hw->hw_qtd_next = EHCI_LIST_END(ehci);
ehci->async->qh_state = QH_STATE_LINKED;
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
+#include <linux/clk.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
+/* Errata i693 */
+static struct clk *utmi_p1_fck;
+static struct clk *utmi_p2_fck;
+static struct clk *xclk60mhsp1_ck;
+static struct clk *xclk60mhsp2_ck;
+static struct clk *usbhost_p1_fck;
+static struct clk *usbhost_p2_fck;
+static struct clk *init_60m_fclk;
+
/*-------------------------------------------------------------------------*/
static const struct hc_driver ehci_omap_hc_driver;
return __raw_readl(base + reg);
}
+/* Erratum i693 workaround sequence */
+static void omap_ehci_erratum_i693(struct ehci_hcd *ehci)
+{
+ int ret = 0;
+
+ /* Switch to the internal 60 MHz clock */
+ ret = clk_set_parent(utmi_p1_fck, init_60m_fclk);
+ if (ret != 0)
+ ehci_err(ehci, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+
+ ret = clk_set_parent(utmi_p2_fck, init_60m_fclk);
+ if (ret != 0)
+ ehci_err(ehci, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+
+ clk_enable(usbhost_p1_fck);
+ clk_enable(usbhost_p2_fck);
+
+ /* Wait 1ms and switch back to the external clock */
+ mdelay(1);
+ ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck);
+ if (ret != 0)
+ ehci_err(ehci, "xclk60mhsp1_ck set parent"
+ "failed error:%d\n", ret);
+
+ ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck);
+ if (ret != 0)
+ ehci_err(ehci, "xclk60mhsp2_ck set parent"
+ "failed error:%d\n", ret);
+
+ clk_disable(usbhost_p1_fck);
+ clk_disable(usbhost_p2_fck);
+}
+
static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
{
struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
}
}
+static int omap_ehci_hub_control(
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength
+)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 __iomem *status_reg = &ehci->regs->port_status[
+ (wIndex & 0xff) - 1];
+ u32 temp;
+ unsigned long flags;
+ int retval = 0;
+
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+ temp = ehci_readl(ehci, status_reg);
+ if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
+ retval = -EPIPE;
+ goto done;
+ }
+
+ temp &= ~PORT_WKCONN_E;
+ temp |= PORT_WKDISC_E | PORT_WKOC_E;
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
+ omap_ehci_erratum_i693(ehci);
+
+ set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
+ goto done;
+ }
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ /* Handle the hub control events here */
+ return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+done:
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ return retval;
+}
+
static void disable_put_regulator(
struct ehci_hcd_omap_platform_data *pdata)
{
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
+ /* get clocks */
+ utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+ if (IS_ERR(utmi_p1_fck)) {
+ ret = PTR_ERR(utmi_p1_fck);
+ dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
+ goto err_add_hcd;
+ }
+
+ xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+ if (IS_ERR(xclk60mhsp1_ck)) {
+ ret = PTR_ERR(xclk60mhsp1_ck);
+ dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+ goto err_utmi_p1_fck;
+ }
+
+ utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+ if (IS_ERR(utmi_p2_fck)) {
+ ret = PTR_ERR(utmi_p2_fck);
+ dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+ goto err_xclk60mhsp1_ck;
+ }
+
+ xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+ if (IS_ERR(xclk60mhsp2_ck)) {
+ ret = PTR_ERR(xclk60mhsp2_ck);
+ dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+ goto err_utmi_p2_fck;
+ }
+
+ usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+ if (IS_ERR(usbhost_p1_fck)) {
+ ret = PTR_ERR(usbhost_p1_fck);
+ dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+ goto err_xclk60mhsp2_ck;
+ }
+
+ usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+ if (IS_ERR(usbhost_p2_fck)) {
+ ret = PTR_ERR(usbhost_p2_fck);
+ dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+ goto err_usbhost_p1_fck;
+ }
+
+ init_60m_fclk = clk_get(dev, "init_60m_fclk");
+ if (IS_ERR(init_60m_fclk)) {
+ ret = PTR_ERR(init_60m_fclk);
+ dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+ goto err_usbhost_p2_fck;
+ }
+
return 0;
+err_usbhost_p2_fck:
+ clk_put(usbhost_p2_fck);
+
+err_usbhost_p1_fck:
+ clk_put(usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+ clk_put(xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+ clk_put(utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+ clk_put(xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+ clk_put(utmi_p1_fck);
+
err_add_hcd:
disable_put_regulator(pdata);
pm_runtime_put_sync(dev);
disable_put_regulator(dev->platform_data);
iounmap(hcd->regs);
usb_put_hcd(hcd);
+
+ clk_put(utmi_p1_fck);
+ clk_put(utmi_p2_fck);
+ clk_put(xclk60mhsp1_ck);
+ clk_put(xclk60mhsp2_ck);
+ clk_put(usbhost_p1_fck);
+ clk_put(usbhost_p2_fck);
+ clk_put(init_60m_fclk);
+
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
+ .hub_control = omap_ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
hcd->has_tt = 1;
tdi_reset(ehci);
}
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
- /* EHCI #1 or #2 on 6 Series/C200 Series chipset */
- if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
- ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
- hcd->broken_pci_sleep = 1;
- device_set_wakeup_capable(&pdev->dev, false);
- }
- }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
goto fail_create_hcd;
}
- if (pdev->dev.platform_data != NULL)
- pdata = pdev->dev.platform_data;
+ pdata = pdev->dev.platform_data;
/* initialize hcd */
hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
*
* Properly shutdown the hcd, call driver's shutdown routine.
*/
-static int ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
+static void ehci_hcd_xilinx_of_shutdown(struct platform_device *op)
{
struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
-
- return 0;
}
}
/* Carry out the final steps of resuming the controller device */
-static void ohci_finish_controller_resume(struct usb_hcd *hcd)
+static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int port;
struct xhci_virt_device *virt_dev,
int slot_id)
{
- struct list_head *tt;
struct list_head *tt_list_head;
- struct list_head *tt_next;
- struct xhci_tt_bw_info *tt_info;
+ struct xhci_tt_bw_info *tt_info, *next;
+ bool slot_found = false;
/* If the device never made it past the Set Address stage,
* it may not have the real_port set correctly.
}
tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
- if (list_empty(tt_list_head))
- return;
-
- list_for_each(tt, tt_list_head) {
- tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
- if (tt_info->slot_id == slot_id)
+ list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+ /* Multi-TT hubs will have more than one entry */
+ if (tt_info->slot_id == slot_id) {
+ slot_found = true;
+ list_del(&tt_info->tt_list);
+ kfree(tt_info);
+ } else if (slot_found) {
break;
+ }
}
- /* Cautionary measure in case the hub was disconnected before we
- * stored the TT information.
- */
- if (tt_info->slot_id != slot_id)
- return;
-
- tt_next = tt->next;
- tt_info = list_entry(tt, struct xhci_tt_bw_info,
- tt_list);
- /* Multi-TT hubs will have more than one entry */
- do {
- list_del(tt);
- kfree(tt_info);
- tt = tt_next;
- if (list_empty(tt_list_head))
- break;
- tt_next = tt->next;
- tt_info = list_entry(tt, struct xhci_tt_bw_info,
- tt_list);
- } while (tt_info->slot_id == slot_id);
}
int xhci_alloc_tt_info(struct xhci_hcd *xhci,
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
struct dev_info *dev_info, *next;
- struct list_head *tt_list_head;
- struct list_head *tt;
- struct list_head *endpoints;
- struct list_head *ep, *q;
- struct xhci_tt_bw_info *tt_info;
- struct xhci_interval_bw_table *bwt;
- struct xhci_virt_ep *virt_ep;
-
unsigned long flags;
int size;
- int i;
+ int i, j, num_ports;
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
}
spin_unlock_irqrestore(&xhci->lock, flags);
- bwt = &xhci->rh_bw->bw_table;
- for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
- endpoints = &bwt->interval_bw[i].endpoints;
- list_for_each_safe(ep, q, endpoints) {
- virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
- list_del(&virt_ep->bw_endpoint_list);
- kfree(virt_ep);
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ for (i = 0; i < num_ports; i++) {
+ struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+ for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+ struct list_head *ep = &bwt->interval_bw[j].endpoints;
+ while (!list_empty(ep))
+ list_del_init(ep->next);
}
}
- tt_list_head = &xhci->rh_bw->tts;
- list_for_each_safe(tt, q, tt_list_head) {
- tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
- list_del(tt);
- kfree(tt_info);
+ for (i = 0; i < num_ports; i++) {
+ struct xhci_tt_bw_info *tt, *n;
+ list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
+ list_del(&tt->tt_list);
+ kfree(tt);
+ }
}
xhci->num_usb2_ports = 0;
command = xhci_readl(xhci, &xhci->op_regs->command);
command |= CMD_CSS;
xhci_writel(xhci, command, &xhci->op_regs->command);
- if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
- xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+ if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+ xhci_warn(xhci, "WARN: xHC save state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
command |= CMD_CRS;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (handshake(xhci, &xhci->op_regs->status,
- STS_RESTORE, 0, 10*100)) {
- xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+ STS_RESTORE, 0, 10 * 1000)) {
+ xhci_warn(xhci, "WARN: xHC restore state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
}
default:
dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
__func__);
- return -EINVAL;
+ return USB3_LPM_DISABLED;
}
if (sel <= max_sel_pel && pel <= max_sel_pel)
#include <linux/dma-mapping.h>
#include <mach/cputype.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
*/
/* Integrated highspeed/otg PHY */
-#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
+#define USBPHY_CTL_PADDR 0x01c40034
#define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */
#define USBPHY_PHYCLKGD BIT(8)
#define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */
#define USBPHY_OTGPDWN BIT(1)
#define USBPHY_PHYPDWN BIT(0)
-#define DM355_DEEPSLEEP_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x48)
+#define DM355_DEEPSLEEP_PADDR 0x01c40048
#define DRVVBUS_FORCE BIT(2)
#define DRVVBUS_OVERRIDE BIT(1)
}
musb_ep->desc = NULL;
+ musb_ep->end_point.desc = NULL;
/* abort all pending DMA and requests */
nuke(musb_ep, -ESHUTDOWN);
*/
if (list_empty(&qh->hep->urb_list)) {
struct list_head *head;
+ struct dma_controller *dma = musb->dma_controller;
- if (is_in)
+ if (is_in) {
ep->rx_reinit = 1;
- else
+ if (ep->rx_channel) {
+ dma->channel_release(ep->rx_channel);
+ ep->rx_channel = NULL;
+ }
+ } else {
ep->tx_reinit = 1;
+ if (ep->tx_channel) {
+ dma->channel_release(ep->tx_channel);
+ ep->tx_channel = NULL;
+ }
+ }
/* Clobber old pointers to this qh */
musb_ep_set_qh(ep, is_in, NULL);
regulator_enable(twl->usb3v3);
twl->asleep = 1;
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x10);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
status = USB_EVENT_ID;
otg->default_a = true;
twl->phy.state = OTG_STATE_A_IDLE;
atomic_notifier_call_chain(&twl->phy.notifier, status,
otg->gadget);
} else {
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
- 0x10);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
- 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
}
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+ twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
return IRQ_HANDLED;
}
{
struct twl6030_usb *twl = phy_to_twl(x);
- twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
# Physical Layer USB driver configuration
#
comment "USB Physical Layer drivers"
- depends on USB
+ depends on USB || USB_GADGET
config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
- depends on USB
+ depends on USB || USB_GADGET
depends on I2C
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
+ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
+ { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
+ { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
+ { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
+ { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
+ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
+ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */
/*
static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static const struct usb_device_id generic_serial_ids[] = {
- {.driver_info = 42},
- {}
-};
-
/* All of the device info needed for the Generic Serial Converter */
struct usb_serial_driver usb_serial_generic_device = {
.driver = {
USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT;
/* register our generic driver with ourselves */
- retval = usb_serial_register_drivers(serial_drivers, "usbserial_generic", generic_serial_ids);
+ retval = usb_serial_register_drivers(serial_drivers,
+ "usbserial_generic", generic_device_ids);
#endif
return retval;
}
MCT_U232_SET_REQUEST_TYPE,
0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
WDR_TIMEOUT);
- if (rc < 0)
- dev_err(&serial->dev->dev,
- "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+ kfree(buf);
+
dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
- kfree(buf);
- return rc;
+ if (rc < 0) {
+ dev_err(&serial->dev->dev,
+ "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+ return rc;
+ }
+ return 0;
} /* mct_u232_set_modem_ctrl */
static int mct_u232_get_modem_stat(struct usb_serial *serial,
static int device_type;
-static const struct usb_device_id id_table[] __devinitconst = {
+static const struct usb_device_id id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
/* Function prototypes */
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id);
+static void option_release(struct usb_serial *serial);
static int option_send_setup(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
#define HUAWEI_PRODUCT_E14AC 0x14AC
#define HUAWEI_PRODUCT_K3806 0x14AE
#define HUAWEI_PRODUCT_K4605 0x14C6
+#define HUAWEI_PRODUCT_K5005 0x14C8
#define HUAWEI_PRODUCT_K3770 0x14C9
#define HUAWEI_PRODUCT_K3771 0x14CA
#define HUAWEI_PRODUCT_K4510 0x14CB
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
+#define NOVATELWIRELESS_PRODUCT_MC551 0xB001
/* AMOI PRODUCTS */
#define AMOI_VENDOR_ID 0x1614
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_GT_B3730 0x6889
-/* YUGA products www.yuga-info.com*/
+/* YUGA products www.yuga-info.com gavin.kx@qq.com */
#define YUGA_VENDOR_ID 0x257A
#define YUGA_PRODUCT_CEM600 0x1601
#define YUGA_PRODUCT_CEM610 0x1602
#define YUGA_PRODUCT_CEU516 0x160C
#define YUGA_PRODUCT_CEU528 0x160D
#define YUGA_PRODUCT_CEU526 0x160F
+#define YUGA_PRODUCT_CEU881 0x161F
+#define YUGA_PRODUCT_CEU882 0x162F
#define YUGA_PRODUCT_CWM600 0x2601
#define YUGA_PRODUCT_CWM610 0x2602
#define YUGA_PRODUCT_CWU518 0x260B
#define YUGA_PRODUCT_CWU516 0x260C
#define YUGA_PRODUCT_CWU528 0x260D
+#define YUGA_PRODUCT_CWU581 0x260E
#define YUGA_PRODUCT_CWU526 0x260F
-
-#define YUGA_PRODUCT_CLM600 0x2601
-#define YUGA_PRODUCT_CLM610 0x2602
-#define YUGA_PRODUCT_CLM500 0x2603
-#define YUGA_PRODUCT_CLM510 0x2604
-#define YUGA_PRODUCT_CLM800 0x2605
-#define YUGA_PRODUCT_CLM900 0x2606
-
-#define YUGA_PRODUCT_CLU718 0x2607
-#define YUGA_PRODUCT_CLU716 0x2608
-#define YUGA_PRODUCT_CLU728 0x2609
-#define YUGA_PRODUCT_CLU726 0x260A
-#define YUGA_PRODUCT_CLU518 0x260B
-#define YUGA_PRODUCT_CLU516 0x260C
-#define YUGA_PRODUCT_CLU528 0x260D
-#define YUGA_PRODUCT_CLU526 0x260F
+#define YUGA_PRODUCT_CWU582 0x261F
+#define YUGA_PRODUCT_CWU583 0x262F
+
+#define YUGA_PRODUCT_CLM600 0x3601
+#define YUGA_PRODUCT_CLM610 0x3602
+#define YUGA_PRODUCT_CLM500 0x3603
+#define YUGA_PRODUCT_CLM510 0x3604
+#define YUGA_PRODUCT_CLM800 0x3605
+#define YUGA_PRODUCT_CLM900 0x3606
+
+#define YUGA_PRODUCT_CLU718 0x3607
+#define YUGA_PRODUCT_CLU716 0x3608
+#define YUGA_PRODUCT_CLU728 0x3609
+#define YUGA_PRODUCT_CLU726 0x360A
+#define YUGA_PRODUCT_CLU518 0x360B
+#define YUGA_PRODUCT_CLU516 0x360C
+#define YUGA_PRODUCT_CLU528 0x360D
+#define YUGA_PRODUCT_CLU526 0x360F
/* Viettel products */
#define VIETTEL_VENDOR_ID 0x2262
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+/* Cellient products */
+#define CELLIENT_VENDOR_ID 0x2692
+#define CELLIENT_PRODUCT_MEN200 0x9005
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
+ /* Novatel Ovation MC551 a.k.a. Verizon USB551L */
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
.ioctl = usb_wwan_ioctl,
.attach = usb_wwan_startup,
.disconnect = usb_wwan_disconnect,
- .release = usb_wwan_release,
+ .release = option_release,
.read_int_callback = option_instat_callback,
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
static bool debug;
-/* per port private data */
-
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-#define OUT_BUFLEN 4096
-
-struct option_port_private {
- /* Input endpoints and buffer for this port */
- struct urb *in_urbs[N_IN_URB];
- u8 *in_buffer[N_IN_URB];
- /* Output endpoints and buffer for this port */
- struct urb *out_urbs[N_OUT_URB];
- u8 *out_buffer[N_OUT_URB];
- unsigned long out_busy; /* Bit vector of URBs in use */
- int opened;
- struct usb_anchor delayed;
-
- /* Settings for the port */
- int rts_state; /* Handshaking pins (outputs) */
- int dtr_state;
- int cts_state; /* Handshaking pins (inputs) */
- int dsr_state;
- int dcd_state;
- int ri_state;
-
- unsigned long tx_start_time[N_OUT_URB];
-};
-
module_usb_serial_driver(serial_drivers, option_ids);
static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
return 0;
}
+static void option_release(struct usb_serial *serial)
+{
+ struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+ usb_wwan_release(serial);
+
+ kfree(priv);
+}
+
static void option_instat_callback(struct urb *urb)
{
int err;
int status = urb->status;
struct usb_serial_port *port = urb->context;
- struct option_port_private *portdata = usb_get_serial_port_data(port);
+ struct usb_wwan_port_private *portdata =
+ usb_get_serial_port_data(port);
dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
struct usb_serial *serial = port->serial;
struct usb_wwan_intf_private *intfdata =
(struct usb_wwan_intf_private *) serial->private;
- struct option_port_private *portdata;
+ struct usb_wwan_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
int val = 0;
{USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */
{USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */
{USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
+ {USB_DEVICE(0x1199, 0x9010)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9012)}, /* Sierra Wireless Gobi 3000 QDL */
{USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+ {USB_DEVICE(0x1199, 0x9014)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
+ {USB_DEVICE(0x1199, 0x9018)}, /* Sierra Wireless Gobi 3000 QDL */
+ {USB_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
{USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
{USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
{ } /* Terminating entry */
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ /* AT&T Direct IP LTE modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
{ USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
static struct usb_serial_driver *search_serial_device(
struct usb_interface *iface)
{
- const struct usb_device_id *id;
+ const struct usb_device_id *id = NULL;
struct usb_serial_driver *drv;
+ struct usb_driver *driver = to_usb_driver(iface->dev.driver);
/* Check if the usb id matches a known device */
list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
- id = get_iface_id(drv, iface);
+ if (drv->usb_driver == driver)
+ id = get_iface_id(drv, iface);
if (id)
return drv;
}
if (retval) {
dbg("sub driver rejected device");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return retval;
}
*/
if (num_bulk_in == 0 || num_bulk_out == 0) {
dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return -ENODEV;
}
if (num_ports == 0) {
dev_err(&interface->dev,
"Generic device with no bulk out, not allowed.\n");
- kfree(serial);
+ usb_serial_put(serial);
module_put(type->driver.owner);
return -EIO;
}
if (us->fflags & US_FL_NO_READ_CAPACITY_16)
sdev->no_read_capacity_16 = 1;
+ /*
+ * Many devices do not respond properly to READ_CAPACITY_16.
+ * Tell the SCSI layer to try READ_CAPACITY_10 first.
+ */
+ sdev->try_rc_10_first = 1;
+
/* assume SPC3 or latter devices support sense size > 18 */
if (sdev->scsi_level > SCSI_SPC_2)
us->fflags |= US_FL_SANE_SENSE;
struct vhost_dev *dev = data;
struct vhost_work *work = NULL;
unsigned uninitialized_var(seq);
+ mm_segment_t oldfs = get_fs();
+ set_fs(USER_DS);
use_mm(dev->mm);
for (;;) {
}
unuse_mm(dev->mm);
+ set_fs(oldfs);
return 0;
}
config LCD_TOSA
tristate "Sharp SL-6000 LCD Driver"
- depends on SPI && MACH_TOSA
+ depends on I2C && SPI && MACH_TOSA
help
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
for its LCD.
EXPORT_SYMBOL_GPL(ili9320_probe_spi);
-int __devexit ili9320_remove(struct ili9320 *ili)
+int ili9320_remove(struct ili9320 *ili)
{
ili9320_power(ili, FB_BLANK_POWERDOWN);
static int
adv7393_write_proc(struct file *file, const char __user * buffer,
- unsigned long count, void *data)
+ size_t count, void *data)
{
struct adv7393fb_device *fbdev = data;
- char line[8];
unsigned int val;
int ret;
- ret = copy_from_user(line, buffer, count);
+ ret = kstrtouint_from_user(buffer, count, 0, &val);
if (ret)
return -EFAULT;
- val = simple_strtoul(line, NULL, 0);
adv7393_write(fbdev->client, val >> 8, val & 0xff);
return count;
static struct platform_driver broadsheetfb_driver = {
.probe = broadsheetfb_probe,
- .remove = broadsheetfb_remove,
+ .remove = __devexit_p(broadsheetfb_remove),
.driver = {
.owner = THIS_MODULE,
.name = "broadsheetfb",
big letters. It fits between the sun 12x22 and the normal 8x16 font.
If other fonts are too big or too small for you, say Y, otherwise say N.
+config FONT_AUTOSELECT
+ def_bool y
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE || STI_CONSOLE || USB_SISUSBVGA_CON
+ depends on !FONT_8x8
+ depends on !FONT_6x11
+ depends on !FONT_7x14
+ depends on !FONT_PEARL_8x8
+ depends on !FONT_ACORN_8x8
+ depends on !FONT_MINI_4x6
+ depends on !FONT_SUN8x16
+ depends on !FONT_SUN12x22
+ depends on !FONT_10x18
+ select FONT_8x16
+
endmenu
static struct platform_driver mbxfb_driver = {
.probe = mbxfb_probe,
- .remove = mbxfb_remove,
+ .remove = __devexit_p(mbxfb_remove),
.suspend = mbxfb_suspend,
.resume = mbxfb_resume,
.driver = {
result = (unsigned int)tmp / 1000;
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
- pixclk, clk, result, clk / result);
+ pixclk, clk, result, result ? clk / result : clk);
return result;
}
writel(0, regs + VIDOSD_A(win, sfb->variant));
writel(0, regs + VIDOSD_B(win, sfb->variant));
writel(0, regs + VIDOSD_C(win, sfb->variant));
- reg = readl(regs + SHADOWCON);
- writel(reg & ~SHADOWCON_WINx_PROTECT(win), regs + SHADOWCON);
+
+ if (sfb->variant.has_shadowcon) {
+ reg = readl(sfb->regs + SHADOWCON);
+ reg &= ~(SHADOWCON_WINx_PROTECT(win) |
+ SHADOWCON_CHx_ENABLE(win) |
+ SHADOWCON_CHx_LOCAL_ENABLE(win));
+ writel(reg, sfb->regs + SHADOWCON);
+ }
}
static int __devinit s3c_fb_probe(struct platform_device *pdev)
/* following part not present in X11 driver */
cr67 = vga_in8(0x3d5, par) & 0xf;
vga_out8(0x3d5, 0x50 | cr67, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x67, par);
/* end of part */
vga_out8(0x3d5, reg->CR67 & ~0x0c, par);
vga_out8(0x3d4, 0x66, par);
cr66 = vga_in8(0x3d5, par);
vga_out8(0x3d5, cr66 | 0x02, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x66, par);
vga_out8(0x3d5, cr66 & ~0x02, par); /* clear reset flag */
- udelay(10000);
+ mdelay(10);
/*
vga_out8(0x3d4, 0x3f, par);
cr3f = vga_in8(0x3d5, par);
vga_out8(0x3d5, cr3f | 0x08, par);
- udelay(10000);
+ mdelay(10);
vga_out8(0x3d4, 0x3f, par);
vga_out8(0x3d5, cr3f & ~0x08, par); /* clear reset flags */
- udelay(10000);
+ mdelay(10);
/* Savage ramdac speeds */
par->numClocks = 4;
} __attribute__((packed));
static unsigned int hpwdt_nmi_decoding;
-static unsigned int allow_kdump;
+static unsigned int allow_kdump = 1;
static unsigned int is_icru;
static DEFINE_SPINLOCK(rom_lock);
static void *cru_rom_addr;
static void hpwdt_exit_nmi_decoding(void)
{
unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+ unregister_nmi_handler(NMI_SERR, "hpwdt");
+ unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
if (cru_rom_addr)
iounmap(cru_rom_addr);
}
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" DRV_NAME);
* Watchdog driver for ARM SP805 watchdog module
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2 or later. This program is licensed "as is" without any
module_amba_driver(sp805_wdt_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
MODULE_LICENSE("GPL");
sizeof(struct watchdog_info)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
err = watchdog_get_status(wdd, &val);
- if (err)
+ if (err == -ENODEV)
return err;
return put_user(val, p);
case WDIOC_GETBOOTSTATUS:
handle_edge_irq, "event");
xen_irq_info_evtchn_init(irq, evtchn);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
}
out:
xen_irq_info_ipi_init(cpu, irq, evtchn, ipi);
bind_evtchn_to_cpu(evtchn, cpu);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_IPI);
}
out:
xen_irq_info_virq_init(cpu, irq, evtchn, virq);
bind_evtchn_to_cpu(evtchn, cpu);
+ } else {
+ struct irq_info *info = info_for_irq(irq);
+ WARN_ON(info == NULL || info->type != IRQT_VIRQ);
}
out:
#ifdef CONFIG_ACPI
handle = DEVICE_ACPI_HANDLE(&pci_dev->dev);
- if (!handle)
+ if (!handle && pci_dev->bus->bridge)
handle = DEVICE_ACPI_HANDLE(pci_dev->bus->bridge);
#ifdef CONFIG_PCI_IOV
if (!handle && pci_dev->is_virtfn)
static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path,
struct ulist *parents, int level,
- struct btrfs_key *key, u64 wanted_disk_byte,
+ struct btrfs_key *key_for_search, u64 time_seq,
+ u64 wanted_disk_byte,
const u64 *extent_item_pos)
{
- int ret;
- int slot = path->slots[level];
- struct extent_buffer *eb = path->nodes[level];
+ int ret = 0;
+ int slot;
+ struct extent_buffer *eb;
+ struct btrfs_key key;
struct btrfs_file_extent_item *fi;
struct extent_inode_elem *eie = NULL;
u64 disk_byte;
- u64 wanted_objectid = key->objectid;
-add_parent:
- if (level == 0 && extent_item_pos) {
- fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
- ret = check_extent_in_eb(key, eb, fi, *extent_item_pos, &eie);
+ if (level != 0) {
+ eb = path->nodes[level];
+ ret = ulist_add(parents, eb->start, 0, GFP_NOFS);
if (ret < 0)
return ret;
- }
- ret = ulist_add(parents, eb->start, (unsigned long)eie, GFP_NOFS);
- if (ret < 0)
- return ret;
-
- if (level != 0)
return 0;
+ }
/*
- * if the current leaf is full with EXTENT_DATA items, we must
- * check the next one if that holds a reference as well.
- * ref->count cannot be used to skip this check.
- * repeat this until we don't find any additional EXTENT_DATA items.
+ * We normally enter this function with the path already pointing to
+ * the first item to check. But sometimes, we may enter it with
+ * slot==nritems. In that case, go to the next leaf before we continue.
*/
- while (1) {
- eie = NULL;
- ret = btrfs_next_leaf(root, path);
- if (ret < 0)
- return ret;
- if (ret)
- return 0;
+ if (path->slots[0] >= btrfs_header_nritems(path->nodes[0]))
+ ret = btrfs_next_old_leaf(root, path, time_seq);
+ while (!ret) {
eb = path->nodes[0];
- for (slot = 0; slot < btrfs_header_nritems(eb); ++slot) {
- btrfs_item_key_to_cpu(eb, key, slot);
- if (key->objectid != wanted_objectid ||
- key->type != BTRFS_EXTENT_DATA_KEY)
- return 0;
- fi = btrfs_item_ptr(eb, slot,
- struct btrfs_file_extent_item);
- disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
- if (disk_byte == wanted_disk_byte)
- goto add_parent;
+ slot = path->slots[0];
+
+ btrfs_item_key_to_cpu(eb, &key, slot);
+
+ if (key.objectid != key_for_search->objectid ||
+ key.type != BTRFS_EXTENT_DATA_KEY)
+ break;
+
+ fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
+ disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+
+ if (disk_byte == wanted_disk_byte) {
+ eie = NULL;
+ if (extent_item_pos) {
+ ret = check_extent_in_eb(&key, eb, fi,
+ *extent_item_pos,
+ &eie);
+ if (ret < 0)
+ break;
+ }
+ if (!ret) {
+ ret = ulist_add(parents, eb->start,
+ (unsigned long)eie, GFP_NOFS);
+ if (ret < 0)
+ break;
+ if (!extent_item_pos) {
+ ret = btrfs_next_old_leaf(root, path,
+ time_seq);
+ continue;
+ }
+ }
}
+ ret = btrfs_next_old_item(root, path, time_seq);
}
- return 0;
+ if (ret > 0)
+ ret = 0;
+ return ret;
}
/*
struct btrfs_path *path;
struct btrfs_root *root;
struct btrfs_key root_key;
- struct btrfs_key key = {0};
struct extent_buffer *eb;
int ret = 0;
int root_level;
goto out;
}
- if (level == 0) {
- if (ret == 1 && path->slots[0] >= btrfs_header_nritems(eb)) {
- ret = btrfs_next_leaf(root, path);
- if (ret)
- goto out;
- eb = path->nodes[0];
- }
-
- btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
- }
-
- ret = add_all_parents(root, path, parents, level, &key,
- ref->wanted_disk_byte, extent_item_pos);
+ ret = add_all_parents(root, path, parents, level, &ref->key_for_search,
+ time_seq, ref->wanted_disk_byte,
+ extent_item_pos);
out:
btrfs_free_path(path);
return ret;
#define BTRFS_INODE_IN_DEFRAG 3
#define BTRFS_INODE_DELALLOC_META_RESERVED 4
#define BTRFS_INODE_HAS_ORPHAN_ITEM 5
+#define BTRFS_INODE_HAS_ASYNC_EXTENT 6
/* in memory btrfs inode */
struct btrfs_inode {
#include "print-tree.h"
#include "locking.h"
#include "check-integrity.h"
+#include "rcu-string.h"
#define BTRFSIC_BLOCK_HASHTABLE_SIZE 0x10000
#define BTRFSIC_BLOCK_LINK_HASHTABLE_SIZE 0x10000
superblock_tmp->never_written = 0;
superblock_tmp->mirror_num = 1 + superblock_mirror_num;
if (state->print_mask & BTRFSIC_PRINT_MASK_SUPERBLOCK_WRITE)
- printk(KERN_INFO "New initial S-block (bdev %p, %s)"
- " @%llu (%s/%llu/%d)\n",
- superblock_bdev, device->name,
- (unsigned long long)dev_bytenr,
- dev_state->name,
- (unsigned long long)dev_bytenr,
- superblock_mirror_num);
+ printk_in_rcu(KERN_INFO "New initial S-block (bdev %p, %s)"
+ " @%llu (%s/%llu/%d)\n",
+ superblock_bdev,
+ rcu_str_deref(device->name),
+ (unsigned long long)dev_bytenr,
+ dev_state->name,
+ (unsigned long long)dev_bytenr,
+ superblock_mirror_num);
list_add(&superblock_tmp->all_blocks_node,
&state->all_blocks_list);
btrfsic_block_hashtable_add(superblock_tmp,
return 0;
}
+/*
+ * This allocates memory and gets a tree modification sequence number when
+ * needed.
+ *
+ * Returns 0 when no sequence number is needed, < 0 on error.
+ * Returns 1 when a sequence number was added. In this case,
+ * fs_info->tree_mod_seq_lock was acquired and must be released by the caller
+ * after inserting into the rb tree.
+ */
static inline int tree_mod_alloc(struct btrfs_fs_info *fs_info, gfp_t flags,
struct tree_mod_elem **tm_ret)
{
*/
kfree(tm);
seq = 0;
+ spin_unlock(&fs_info->tree_mod_seq_lock);
} else {
__get_tree_mod_seq(fs_info, &tm->elem);
seq = tm->elem.seq;
}
- spin_unlock(&fs_info->tree_mod_seq_lock);
return seq;
}
tm->slot = slot;
tm->generation = btrfs_node_ptr_generation(eb, slot);
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static noinline int
tm->move.nr_items = nr_items;
tm->op = MOD_LOG_MOVE_KEYS;
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static noinline int
tm->generation = btrfs_header_generation(old_root);
tm->op = MOD_LOG_ROOT_REPLACE;
- return __tree_mod_log_insert(fs_info, tm);
+ ret = __tree_mod_log_insert(fs_info, tm);
+ spin_unlock(&fs_info->tree_mod_seq_lock);
+ return ret;
}
static struct tree_mod_elem *
looped = 1;
}
+ /* if there's no old root to return, return what we found instead */
+ if (!found)
+ found = tm;
+
return found;
}
return eb_rewin;
}
+/*
+ * get_old_root() rewinds the state of @root's root node to the given @time_seq
+ * value. If there are no changes, the current root->root_node is returned. If
+ * anything changed in between, there's a fresh buffer allocated on which the
+ * rewind operations are done. In any case, the returned buffer is read locked.
+ * Returns NULL on error (with no locks held).
+ */
static inline struct extent_buffer *
get_old_root(struct btrfs_root *root, u64 time_seq)
{
struct tree_mod_elem *tm;
struct extent_buffer *eb;
- struct tree_mod_root *old_root;
- u64 old_generation;
+ struct tree_mod_root *old_root = NULL;
+ u64 old_generation = 0;
+ u64 logical;
+ eb = btrfs_read_lock_root_node(root);
tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq);
if (!tm)
return root->node;
- old_root = &tm->old_root;
- old_generation = tm->generation;
+ if (tm->op == MOD_LOG_ROOT_REPLACE) {
+ old_root = &tm->old_root;
+ old_generation = tm->generation;
+ logical = old_root->logical;
+ } else {
+ logical = root->node->start;
+ }
- tm = tree_mod_log_search(root->fs_info, old_root->logical, time_seq);
+ tm = tree_mod_log_search(root->fs_info, logical, time_seq);
/*
* there was an item in the log when __tree_mod_log_oldest_root
* returned. this one must not go away, because the time_seq passed to
*/
BUG_ON(!tm);
- if (old_root->logical == root->node->start) {
- /* there are logged operations for the current root */
- eb = btrfs_clone_extent_buffer(root->node);
- } else {
- /* there's a root replace operation for the current root */
+ if (old_root)
eb = alloc_dummy_extent_buffer(tm->index << PAGE_CACHE_SHIFT,
root->nodesize);
+ else
+ eb = btrfs_clone_extent_buffer(root->node);
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
+ if (!eb)
+ return NULL;
+ btrfs_tree_read_lock(eb);
+ if (old_root) {
btrfs_set_header_bytenr(eb, eb->start);
btrfs_set_header_backref_rev(eb, BTRFS_MIXED_BACKREF_REV);
btrfs_set_header_owner(eb, root->root_key.objectid);
+ btrfs_set_header_level(eb, old_root->level);
+ btrfs_set_header_generation(eb, old_generation);
}
- if (!eb)
- return NULL;
- btrfs_set_header_level(eb, old_root->level);
- btrfs_set_header_generation(eb, old_generation);
__tree_mod_log_rewind(eb, time_seq, tm);
+ extent_buffer_get(eb);
return eb;
}
BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
return 0;
- btrfs_header_nritems(mid);
-
left = read_node_slot(root, parent, pslot - 1);
if (left) {
btrfs_tree_lock(left);
wret = push_node_left(trans, root, left, mid, 1);
if (wret < 0)
ret = wret;
- btrfs_header_nritems(mid);
}
/*
again:
b = get_old_root(root, time_seq);
- extent_buffer_get(b);
level = btrfs_header_level(b);
- btrfs_tree_read_lock(b);
p->locks[level] = BTRFS_READ_LOCK;
while (b) {
* returns < 0 on io errors.
*/
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path)
+{
+ return btrfs_next_old_leaf(root, path, 0);
+}
+
+int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
+ u64 time_seq)
{
int slot;
int level;
path->keep_locks = 1;
path->leave_spinning = 1;
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (time_seq)
+ ret = btrfs_search_old_slot(root, &key, path, time_seq);
+ else
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
path->keep_locks = 0;
if (ret < 0)
}
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
-static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
+ u64 time_seq);
+static inline int btrfs_next_old_item(struct btrfs_root *root,
+ struct btrfs_path *p, u64 time_seq)
{
++p->slots[0];
if (p->slots[0] >= btrfs_header_nritems(p->nodes[0]))
- return btrfs_next_leaf(root, p);
+ return btrfs_next_old_leaf(root, p, time_seq);
return 0;
}
+static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+{
+ return btrfs_next_old_item(root, p, 0);
+}
int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
int __must_check btrfs_drop_snapshot(struct btrfs_root *root,
}
}
}
+
+void btrfs_destroy_delayed_inodes(struct btrfs_root *root)
+{
+ struct btrfs_delayed_root *delayed_root;
+ struct btrfs_delayed_node *curr_node, *prev_node;
+
+ delayed_root = btrfs_get_delayed_root(root);
+
+ curr_node = btrfs_first_delayed_node(delayed_root);
+ while (curr_node) {
+ __btrfs_kill_delayed_node(curr_node);
+
+ prev_node = curr_node;
+ curr_node = btrfs_next_delayed_node(curr_node);
+ btrfs_release_delayed_node(prev_node);
+ }
+}
+
/* Used for drop dead root */
void btrfs_kill_all_delayed_nodes(struct btrfs_root *root);
+/* Used for clean the transaction */
+void btrfs_destroy_delayed_inodes(struct btrfs_root *root);
+
/* Used for readdir() */
void btrfs_get_delayed_items(struct inode *inode, struct list_head *ins_list,
struct list_head *del_list);
#include "free-space-cache.h"
#include "inode-map.h"
#include "check-integrity.h"
+#include "rcu-string.h"
static struct extent_io_ops btree_extent_io_ops;
static void end_workqueue_fn(struct btrfs_work *work);
features = btrfs_super_incompat_flags(disk_super);
features |= BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF;
- if (tree_root->fs_info->compress_type & BTRFS_COMPRESS_LZO)
+ if (tree_root->fs_info->compress_type == BTRFS_COMPRESS_LZO)
features |= BTRFS_FEATURE_INCOMPAT_COMPRESS_LZO;
/*
struct btrfs_device *device = (struct btrfs_device *)
bh->b_private;
- printk_ratelimited(KERN_WARNING "lost page write due to "
- "I/O error on %s\n", device->name);
+ printk_ratelimited_in_rcu(KERN_WARNING "lost page write due to "
+ "I/O error on %s\n",
+ rcu_str_deref(device->name));
/* note, we dont' set_buffer_write_io_error because we have
* our own ways of dealing with the IO errors
*/
wait_for_completion(&device->flush_wait);
if (bio_flagged(bio, BIO_EOPNOTSUPP)) {
- printk("btrfs: disabling barriers on dev %s\n",
- device->name);
+ printk_in_rcu("btrfs: disabling barriers on dev %s\n",
+ rcu_str_deref(device->name));
device->nobarriers = 1;
}
if (!bio_flagged(bio, BIO_UPTODATE)) {
delayed_refs = &trans->delayed_refs;
-again:
spin_lock(&delayed_refs->lock);
if (delayed_refs->num_entries == 0) {
spin_unlock(&delayed_refs->lock);
return ret;
}
- node = rb_first(&delayed_refs->root);
- while (node) {
+ while ((node = rb_first(&delayed_refs->root)) != NULL) {
ref = rb_entry(node, struct btrfs_delayed_ref_node, rb_node);
- node = rb_next(node);
-
- ref->in_tree = 0;
- rb_erase(&ref->rb_node, &delayed_refs->root);
- delayed_refs->num_entries--;
atomic_set(&ref->refs, 1);
if (btrfs_delayed_ref_is_head(ref)) {
struct btrfs_delayed_ref_head *head;
head = btrfs_delayed_node_to_head(ref);
- spin_unlock(&delayed_refs->lock);
- mutex_lock(&head->mutex);
+ if (!mutex_trylock(&head->mutex)) {
+ atomic_inc(&ref->refs);
+ spin_unlock(&delayed_refs->lock);
+
+ /* Need to wait for the delayed ref to run */
+ mutex_lock(&head->mutex);
+ mutex_unlock(&head->mutex);
+ btrfs_put_delayed_ref(ref);
+
+ spin_lock(&delayed_refs->lock);
+ continue;
+ }
+
kfree(head->extent_op);
delayed_refs->num_heads--;
if (list_empty(&head->cluster))
delayed_refs->num_heads_ready--;
list_del_init(&head->cluster);
- mutex_unlock(&head->mutex);
- btrfs_put_delayed_ref(ref);
- goto again;
}
+ ref->in_tree = 0;
+ rb_erase(&ref->rb_node, &delayed_refs->root);
+ delayed_refs->num_entries--;
+
spin_unlock(&delayed_refs->lock);
btrfs_put_delayed_ref(ref);
&(&BTRFS_I(page->mapping->host)->io_tree)->buffer,
offset >> PAGE_CACHE_SHIFT);
spin_unlock(&dirty_pages->buffer_lock);
- if (eb) {
+ if (eb)
ret = test_and_clear_bit(EXTENT_BUFFER_DIRTY,
&eb->bflags);
- atomic_set(&eb->refs, 1);
- }
if (PageWriteback(page))
end_page_writeback(page);
spin_unlock_irq(&page->mapping->tree_lock);
}
- page->mapping->a_ops->invalidatepage(page, 0);
unlock_page(page);
+ page_cache_release(page);
}
}
u64 start;
u64 end;
int ret;
+ bool loop = true;
unpin = pinned_extents;
+again:
while (1) {
ret = find_first_extent_bit(unpin, 0, &start, &end,
EXTENT_DIRTY);
cond_resched();
}
+ if (loop) {
+ if (unpin == &root->fs_info->freed_extents[0])
+ unpin = &root->fs_info->freed_extents[1];
+ else
+ unpin = &root->fs_info->freed_extents[0];
+ loop = false;
+ goto again;
+ }
+
return 0;
}
/* FIXME: cleanup wait for commit */
cur_trans->in_commit = 1;
cur_trans->blocked = 1;
- if (waitqueue_active(&root->fs_info->transaction_blocked_wait))
- wake_up(&root->fs_info->transaction_blocked_wait);
+ wake_up(&root->fs_info->transaction_blocked_wait);
cur_trans->blocked = 0;
- if (waitqueue_active(&root->fs_info->transaction_wait))
- wake_up(&root->fs_info->transaction_wait);
+ wake_up(&root->fs_info->transaction_wait);
cur_trans->commit_done = 1;
- if (waitqueue_active(&cur_trans->commit_wait))
- wake_up(&cur_trans->commit_wait);
+ wake_up(&cur_trans->commit_wait);
+
+ btrfs_destroy_delayed_inodes(root);
+ btrfs_assert_delayed_root_empty(root);
btrfs_destroy_pending_snapshots(cur_trans);
btrfs_destroy_marked_extents(root, &cur_trans->dirty_pages,
EXTENT_DIRTY);
+ btrfs_destroy_pinned_extent(root,
+ root->fs_info->pinned_extents);
/*
memset(cur_trans, 0, sizeof(*cur_trans));
if (waitqueue_active(&t->commit_wait))
wake_up(&t->commit_wait);
+ btrfs_destroy_delayed_inodes(root);
+ btrfs_assert_delayed_root_empty(root);
+
btrfs_destroy_pending_snapshots(t);
btrfs_destroy_delalloc_inodes(root);
#include "volumes.h"
#include "check-integrity.h"
#include "locking.h"
+#include "rcu-string.h"
static struct kmem_cache *extent_state_cache;
static struct kmem_cache *extent_buffer_cache;
return -EIO;
}
- printk(KERN_INFO "btrfs read error corrected: ino %lu off %llu (dev %s "
- "sector %llu)\n", page->mapping->host->i_ino, start,
- dev->name, sector);
+ printk_in_rcu(KERN_INFO "btrfs read error corrected: ino %lu off %llu "
+ "(dev %s sector %llu)\n", page->mapping->host->i_ino,
+ start, rcu_str_deref(dev->name), sector);
bio_put(bio);
return 0;
if (IS_ERR(trans)) {
extent_clear_unlock_delalloc(inode,
&BTRFS_I(inode)->io_tree,
- start, end, NULL,
+ start, end, locked_page,
EXTENT_CLEAR_UNLOCK_PAGE |
EXTENT_CLEAR_UNLOCK |
EXTENT_CLEAR_DELALLOC |
out_unlock:
extent_clear_unlock_delalloc(inode,
&BTRFS_I(inode)->io_tree,
- start, end, NULL,
+ start, end, locked_page,
EXTENT_CLEAR_UNLOCK_PAGE |
EXTENT_CLEAR_UNLOCK |
EXTENT_CLEAR_DELALLOC |
compress_file_range(async_cow->inode, async_cow->locked_page,
async_cow->start, async_cow->end, async_cow,
&num_added);
- if (num_added == 0)
+ if (num_added == 0) {
+ btrfs_add_delayed_iput(async_cow->inode);
async_cow->inode = NULL;
+ }
}
/*
{
struct async_cow *async_cow;
async_cow = container_of(work, struct async_cow, work);
+ if (async_cow->inode)
+ btrfs_add_delayed_iput(async_cow->inode);
kfree(async_cow);
}
while (start < end) {
async_cow = kmalloc(sizeof(*async_cow), GFP_NOFS);
BUG_ON(!async_cow); /* -ENOMEM */
- async_cow->inode = inode;
+ async_cow->inode = igrab(inode);
async_cow->root = root;
async_cow->locked_page = locked_page;
async_cow->start = start;
u64 ino = btrfs_ino(inode);
path = btrfs_alloc_path();
- if (!path)
+ if (!path) {
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ start, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
return -ENOMEM;
+ }
nolock = btrfs_is_free_space_inode(root, inode);
trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ start, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
btrfs_free_path(path);
return PTR_ERR(trans);
}
}
btrfs_release_path(path);
- if (cur_offset <= end && cow_start == (u64)-1)
+ if (cur_offset <= end && cow_start == (u64)-1) {
cow_start = cur_offset;
+ cur_offset = end;
+ }
+
if (cow_start != (u64)-1) {
ret = cow_file_range(inode, locked_page, cow_start, end,
page_started, nr_written, 1);
if (!ret)
ret = err;
+ if (ret && cur_offset < end)
+ extent_clear_unlock_delalloc(inode,
+ &BTRFS_I(inode)->io_tree,
+ cur_offset, end, locked_page,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
+
btrfs_free_path(path);
return ret;
}
int ret;
struct btrfs_root *root = BTRFS_I(inode)->root;
- if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW)
+ if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW) {
ret = run_delalloc_nocow(inode, locked_page, start, end,
page_started, 1, nr_written);
- else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC)
+ } else if (BTRFS_I(inode)->flags & BTRFS_INODE_PREALLOC) {
ret = run_delalloc_nocow(inode, locked_page, start, end,
page_started, 0, nr_written);
- else if (!btrfs_test_opt(root, COMPRESS) &&
- !(BTRFS_I(inode)->force_compress) &&
- !(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS))
+ } else if (!btrfs_test_opt(root, COMPRESS) &&
+ !(BTRFS_I(inode)->force_compress) &&
+ !(BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS)) {
ret = cow_file_range(inode, locked_page, start, end,
page_started, nr_written, 1);
- else
+ } else {
+ set_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
+ &BTRFS_I(inode)->runtime_flags);
ret = cow_file_range_async(inode, locked_page, start, end,
page_started, nr_written);
+ }
return ret;
}
else
b_inode->flags &= ~BTRFS_INODE_NODATACOW;
- if (b_dir->flags & BTRFS_INODE_COMPRESS)
+ if (b_dir->flags & BTRFS_INODE_COMPRESS) {
b_inode->flags |= BTRFS_INODE_COMPRESS;
- else
- b_inode->flags &= ~BTRFS_INODE_COMPRESS;
+ b_inode->flags &= ~BTRFS_INODE_NOCOMPRESS;
+ } else {
+ b_inode->flags &= ~(BTRFS_INODE_COMPRESS |
+ BTRFS_INODE_NOCOMPRESS);
+ }
}
static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
#include "locking.h"
#include "inode-map.h"
#include "backref.h"
+#include "rcu-string.h"
/* Mask out flags that are inappropriate for the given type of inode. */
static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
return -ENOENT;
}
-/*
- * Validaty check of prev em and next em:
- * 1) no prev/next em
- * 2) prev/next em is an hole/inline extent
- */
-static int check_adjacent_extents(struct inode *inode, struct extent_map *em)
+static struct extent_map *defrag_lookup_extent(struct inode *inode, u64 start)
{
struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
- struct extent_map *prev = NULL, *next = NULL;
- int ret = 0;
+ struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+ struct extent_map *em;
+ u64 len = PAGE_CACHE_SIZE;
+ /*
+ * hopefully we have this extent in the tree already, try without
+ * the full extent lock
+ */
read_lock(&em_tree->lock);
- prev = lookup_extent_mapping(em_tree, em->start - 1, (u64)-1);
- next = lookup_extent_mapping(em_tree, em->start + em->len, (u64)-1);
+ em = lookup_extent_mapping(em_tree, start, len);
read_unlock(&em_tree->lock);
- if ((!prev || prev->block_start >= EXTENT_MAP_LAST_BYTE) &&
- (!next || next->block_start >= EXTENT_MAP_LAST_BYTE))
- ret = 1;
- free_extent_map(prev);
- free_extent_map(next);
+ if (!em) {
+ /* get the big lock and read metadata off disk */
+ lock_extent(io_tree, start, start + len - 1);
+ em = btrfs_get_extent(inode, NULL, 0, start, len, 0);
+ unlock_extent(io_tree, start, start + len - 1);
+
+ if (IS_ERR(em))
+ return NULL;
+ }
+
+ return em;
+}
+
+static bool defrag_check_next_extent(struct inode *inode, struct extent_map *em)
+{
+ struct extent_map *next;
+ bool ret = true;
+ /* this is the last extent */
+ if (em->start + em->len >= i_size_read(inode))
+ return false;
+
+ next = defrag_lookup_extent(inode, em->start + em->len);
+ if (!next || next->block_start >= EXTENT_MAP_LAST_BYTE)
+ ret = false;
+
+ free_extent_map(next);
return ret;
}
-static int should_defrag_range(struct inode *inode, u64 start, u64 len,
- int thresh, u64 *last_len, u64 *skip,
- u64 *defrag_end)
+static int should_defrag_range(struct inode *inode, u64 start, int thresh,
+ u64 *last_len, u64 *skip, u64 *defrag_end)
{
- struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
- struct extent_map *em = NULL;
- struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+ struct extent_map *em;
int ret = 1;
+ bool next_mergeable = true;
/*
* make sure that once we start defragging an extent, we keep on
*skip = 0;
- /*
- * hopefully we have this extent in the tree already, try without
- * the full extent lock
- */
- read_lock(&em_tree->lock);
- em = lookup_extent_mapping(em_tree, start, len);
- read_unlock(&em_tree->lock);
-
- if (!em) {
- /* get the big lock and read metadata off disk */
- lock_extent(io_tree, start, start + len - 1);
- em = btrfs_get_extent(inode, NULL, 0, start, len, 0);
- unlock_extent(io_tree, start, start + len - 1);
-
- if (IS_ERR(em))
- return 0;
- }
+ em = defrag_lookup_extent(inode, start);
+ if (!em)
+ return 0;
/* this will cover holes, and inline extents */
if (em->block_start >= EXTENT_MAP_LAST_BYTE) {
goto out;
}
- /* If we have nothing to merge with us, just skip. */
- if (check_adjacent_extents(inode, em)) {
- ret = 0;
- goto out;
- }
+ next_mergeable = defrag_check_next_extent(inode, em);
/*
- * we hit a real extent, if it is big don't bother defragging it again
+ * we hit a real extent, if it is big or the next extent is not a
+ * real extent, don't bother defragging it
*/
- if ((*last_len == 0 || *last_len >= thresh) && em->len >= thresh)
+ if ((*last_len == 0 || *last_len >= thresh) &&
+ (em->len >= thresh || !next_mergeable))
ret = 0;
-
out:
/*
* last_len ends up being a counter of how many bytes we've defragged.
break;
if (!should_defrag_range(inode, (u64)i << PAGE_CACHE_SHIFT,
- PAGE_CACHE_SIZE, extent_thresh,
- &last_len, &skip, &defrag_end)) {
+ extent_thresh, &last_len, &skip,
+ &defrag_end)) {
unsigned long next;
/*
* the should_defrag function tells us how much to skip
ret = -EINVAL;
goto out_free;
}
+ if (device->fs_devices && device->fs_devices->seeding) {
+ printk(KERN_INFO "btrfs: resizer unable to apply on "
+ "seeding device %llu\n",
+ (unsigned long long)devid);
+ ret = -EINVAL;
+ goto out_free;
+ }
+
if (!strcmp(sizestr, "max"))
new_size = device->bdev->bd_inode->i_size;
else {
do_div(new_size, root->sectorsize);
new_size *= root->sectorsize;
- printk(KERN_INFO "btrfs: new size for %s is %llu\n",
- device->name, (unsigned long long)new_size);
+ printk_in_rcu(KERN_INFO "btrfs: new size for %s is %llu\n",
+ rcu_str_deref(device->name),
+ (unsigned long long)new_size);
if (new_size > old_size) {
trans = btrfs_start_transaction(root, 0);
di_args->total_bytes = dev->total_bytes;
memcpy(di_args->uuid, dev->uuid, sizeof(di_args->uuid));
if (dev->name) {
- strncpy(di_args->path, dev->name, sizeof(di_args->path));
+ struct rcu_string *name;
+
+ rcu_read_lock();
+ name = rcu_dereference(dev->name);
+ strncpy(di_args->path, name->str, sizeof(di_args->path));
+ rcu_read_unlock();
di_args->path[sizeof(di_args->path) - 1] = 0;
} else {
di_args->path[0] = '\0';
/* start IO across the range first to instantiate any delalloc
* extents
*/
- filemap_write_and_wait_range(inode->i_mapping, start, orig_end);
+ filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
+
+ /*
+ * So with compression we will find and lock a dirty page and clear the
+ * first one as dirty, setup an async extent, and immediately return
+ * with the entire range locked but with nobody actually marked with
+ * writeback. So we can't just filemap_write_and_wait_range() and
+ * expect it to work since it will just kick off a thread to do the
+ * actual work. So we need to call filemap_fdatawrite_range _again_
+ * since it will wait on the page lock, which won't be unlocked until
+ * after the pages have been marked as writeback and so we're good to go
+ * from there. We have to do this otherwise we'll miss the ordered
+ * extents and that results in badness. Please Josef, do not think you
+ * know better and pull this out at some point in the future, it is
+ * right and you are wrong.
+ */
+ if (test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT,
+ &BTRFS_I(inode)->runtime_flags))
+ filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
+
+ filemap_fdatawait_range(inode->i_mapping, start, orig_end);
end = orig_end;
found = 0;
--- /dev/null
+/*
+ * Copyright (C) 2012 Red Hat. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+struct rcu_string {
+ struct rcu_head rcu;
+ char str[0];
+};
+
+static inline struct rcu_string *rcu_string_strdup(const char *src, gfp_t mask)
+{
+ size_t len = strlen(src) + 1;
+ struct rcu_string *ret = kzalloc(sizeof(struct rcu_string) +
+ (len * sizeof(char)), mask);
+ if (!ret)
+ return ret;
+ strncpy(ret->str, src, len);
+ return ret;
+}
+
+static inline void rcu_string_free(struct rcu_string *str)
+{
+ if (str)
+ kfree_rcu(str, rcu);
+}
+
+#define printk_in_rcu(fmt, ...) do { \
+ rcu_read_lock(); \
+ printk(fmt, __VA_ARGS__); \
+ rcu_read_unlock(); \
+} while (0)
+
+#define printk_ratelimited_in_rcu(fmt, ...) do { \
+ rcu_read_lock(); \
+ printk_ratelimited(fmt, __VA_ARGS__); \
+ rcu_read_unlock(); \
+} while (0)
+
+#define rcu_str_deref(rcu_str) ({ \
+ struct rcu_string *__str = rcu_dereference(rcu_str); \
+ __str->str; \
+})
#include "backref.h"
#include "extent_io.h"
#include "check-integrity.h"
+#include "rcu-string.h"
/*
* This is only the first step towards a full-features scrub. It reads all
* hold all of the paths here
*/
for (i = 0; i < ipath->fspath->elem_cnt; ++i)
- printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+ printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
"%s, sector %llu, root %llu, inode %llu, offset %llu, "
"length %llu, links %u (path: %s)\n", swarn->errstr,
- swarn->logical, swarn->dev->name,
+ swarn->logical, rcu_str_deref(swarn->dev->name),
(unsigned long long)swarn->sector, root, inum, offset,
min(isize - offset, (u64)PAGE_SIZE), nlink,
(char *)(unsigned long)ipath->fspath->val[i]);
return 0;
err:
- printk(KERN_WARNING "btrfs: %s at logical %llu on dev "
+ printk_in_rcu(KERN_WARNING "btrfs: %s at logical %llu on dev "
"%s, sector %llu, root %llu, inode %llu, offset %llu: path "
"resolving failed with ret=%d\n", swarn->errstr,
- swarn->logical, swarn->dev->name,
+ swarn->logical, rcu_str_deref(swarn->dev->name),
(unsigned long long)swarn->sector, root, inum, offset, ret);
free_ipath(ipath);
do {
ret = tree_backref_for_extent(&ptr, eb, ei, item_size,
&ref_root, &ref_level);
- printk(KERN_WARNING
+ printk_in_rcu(KERN_WARNING
"btrfs: %s at logical %llu on dev %s, "
"sector %llu: metadata %s (level %d) in tree "
- "%llu\n", errstr, swarn.logical, dev->name,
+ "%llu\n", errstr, swarn.logical,
+ rcu_str_deref(dev->name),
(unsigned long long)swarn.sector,
ref_level ? "node" : "leaf",
ret < 0 ? -1 : ref_level,
spin_lock(&sdev->stat_lock);
++sdev->stat.uncorrectable_errors;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: unable to fixup (nodatasum) error at logical %llu on dev %s\n",
- (unsigned long long)fixup->logical, sdev->dev->name);
+ (unsigned long long)fixup->logical,
+ rcu_str_deref(sdev->dev->name));
}
btrfs_free_path(path);
spin_lock(&sdev->stat_lock);
sdev->stat.corrected_errors++;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: fixed up error at logical %llu on dev %s\n",
- (unsigned long long)logical, sdev->dev->name);
+ (unsigned long long)logical,
+ rcu_str_deref(sdev->dev->name));
}
} else {
did_not_correct_error:
spin_lock(&sdev->stat_lock);
sdev->stat.uncorrectable_errors++;
spin_unlock(&sdev->stat_lock);
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: unable to fixup (regular) error at logical %llu on dev %s\n",
- (unsigned long long)logical, sdev->dev->name);
+ (unsigned long long)logical,
+ rcu_str_deref(sdev->dev->name));
}
out:
#include "version.h"
#include "export.h"
#include "compression.h"
+#include "rcu-string.h"
#define CREATE_TRACE_POINTS
#include <trace/events/btrfs.h>
"error %d\n", btrfs_ino(inode), ret);
}
+static int btrfs_show_devname(struct seq_file *m, struct dentry *root)
+{
+ struct btrfs_fs_info *fs_info = btrfs_sb(root->d_sb);
+ struct btrfs_fs_devices *cur_devices;
+ struct btrfs_device *dev, *first_dev = NULL;
+ struct list_head *head;
+ struct rcu_string *name;
+
+ mutex_lock(&fs_info->fs_devices->device_list_mutex);
+ cur_devices = fs_info->fs_devices;
+ while (cur_devices) {
+ head = &cur_devices->devices;
+ list_for_each_entry(dev, head, dev_list) {
+ if (!first_dev || dev->devid < first_dev->devid)
+ first_dev = dev;
+ }
+ cur_devices = cur_devices->seed;
+ }
+
+ if (first_dev) {
+ rcu_read_lock();
+ name = rcu_dereference(first_dev->name);
+ seq_escape(m, name->str, " \t\n\\");
+ rcu_read_unlock();
+ } else {
+ WARN_ON(1);
+ }
+ mutex_unlock(&fs_info->fs_devices->device_list_mutex);
+ return 0;
+}
+
static const struct super_operations btrfs_super_ops = {
.drop_inode = btrfs_drop_inode,
.evict_inode = btrfs_evict_inode,
.put_super = btrfs_put_super,
.sync_fs = btrfs_sync_fs,
.show_options = btrfs_show_options,
+ .show_devname = btrfs_show_devname,
.write_inode = btrfs_write_inode,
.dirty_inode = btrfs_fs_dirty_inode,
.alloc_inode = btrfs_alloc_inode,
kmem_cache_free(btrfs_transaction_cachep, cur_trans);
cur_trans = fs_info->running_transaction;
goto loop;
+ } else if (root->fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) {
+ spin_unlock(&root->fs_info->trans_lock);
+ kmem_cache_free(btrfs_transaction_cachep, cur_trans);
+ return -EROFS;
}
atomic_set(&cur_trans->num_writers, 1);
static void cleanup_transaction(struct btrfs_trans_handle *trans,
- struct btrfs_root *root)
+ struct btrfs_root *root, int err)
{
struct btrfs_transaction *cur_trans = trans->transaction;
WARN_ON(trans->use_count > 1);
+ btrfs_abort_transaction(trans, root, err);
+
spin_lock(&root->fs_info->trans_lock);
list_del_init(&cur_trans->list);
+ if (cur_trans == root->fs_info->running_transaction) {
+ root->fs_info->running_transaction = NULL;
+ root->fs_info->trans_no_join = 0;
+ }
spin_unlock(&root->fs_info->trans_lock);
btrfs_cleanup_one_transaction(trans->transaction, root);
// WARN_ON(1);
if (current->journal_info == trans)
current->journal_info = NULL;
- cleanup_transaction(trans, root);
+ cleanup_transaction(trans, root, ret);
return ret;
}
#include "volumes.h"
#include "async-thread.h"
#include "check-integrity.h"
+#include "rcu-string.h"
static int init_first_rw_device(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
device = list_entry(fs_devices->devices.next,
struct btrfs_device, dev_list);
list_del(&device->dev_list);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
kfree(fs_devices);
{
struct btrfs_device *device;
struct btrfs_fs_devices *fs_devices;
+ struct rcu_string *name;
u64 found_transid = btrfs_super_generation(disk_super);
- char *name;
fs_devices = find_fsid(disk_super->fsid);
if (!fs_devices) {
memcpy(device->uuid, disk_super->dev_item.uuid,
BTRFS_UUID_SIZE);
spin_lock_init(&device->io_lock);
- device->name = kstrdup(path, GFP_NOFS);
- if (!device->name) {
+
+ name = rcu_string_strdup(path, GFP_NOFS);
+ if (!name) {
kfree(device);
return -ENOMEM;
}
+ rcu_assign_pointer(device->name, name);
INIT_LIST_HEAD(&device->dev_alloc_list);
/* init readahead state */
device->fs_devices = fs_devices;
fs_devices->num_devices++;
- } else if (!device->name || strcmp(device->name, path)) {
- name = kstrdup(path, GFP_NOFS);
+ } else if (!device->name || strcmp(device->name->str, path)) {
+ name = rcu_string_strdup(path, GFP_NOFS);
if (!name)
return -ENOMEM;
- kfree(device->name);
- device->name = name;
+ rcu_string_free(device->name);
+ rcu_assign_pointer(device->name, name);
if (device->missing) {
fs_devices->missing_devices--;
device->missing = 0;
/* We have held the volume lock, it is safe to get the devices. */
list_for_each_entry(orig_dev, &orig->devices, dev_list) {
+ struct rcu_string *name;
+
device = kzalloc(sizeof(*device), GFP_NOFS);
if (!device)
goto error;
- device->name = kstrdup(orig_dev->name, GFP_NOFS);
- if (!device->name) {
+ /*
+ * This is ok to do without rcu read locked because we hold the
+ * uuid mutex so nothing we touch in here is going to disappear.
+ */
+ name = rcu_string_strdup(orig_dev->name->str, GFP_NOFS);
+ if (!name) {
kfree(device);
goto error;
}
+ rcu_assign_pointer(device->name, name);
device->devid = orig_dev->devid;
device->work.func = pending_bios_fn;
}
list_del_init(&device->dev_list);
fs_devices->num_devices--;
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
if (device->bdev)
blkdev_put(device->bdev, device->mode);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
}
mutex_lock(&fs_devices->device_list_mutex);
list_for_each_entry(device, &fs_devices->devices, dev_list) {
struct btrfs_device *new_device;
+ struct rcu_string *name;
if (device->bdev)
fs_devices->open_devices--;
new_device = kmalloc(sizeof(*new_device), GFP_NOFS);
BUG_ON(!new_device); /* -ENOMEM */
memcpy(new_device, device, sizeof(*new_device));
- new_device->name = kstrdup(device->name, GFP_NOFS);
- BUG_ON(device->name && !new_device->name); /* -ENOMEM */
+
+ /* Safe because we are under uuid_mutex */
+ name = rcu_string_strdup(device->name->str, GFP_NOFS);
+ BUG_ON(device->name && !name); /* -ENOMEM */
+ rcu_assign_pointer(new_device->name, name);
new_device->bdev = NULL;
new_device->writeable = 0;
new_device->in_fs_metadata = 0;
if (!device->name)
continue;
- bdev = blkdev_get_by_path(device->name, flags, holder);
+ bdev = blkdev_get_by_path(device->name->str, flags, holder);
if (IS_ERR(bdev)) {
- printk(KERN_INFO "open %s failed\n", device->name);
+ printk(KERN_INFO "open %s failed\n", device->name->str);
goto error;
}
filemap_write_and_wait(bdev->bd_inode->i_mapping);
struct block_device *bdev;
struct list_head *devices;
struct super_block *sb = root->fs_info->sb;
+ struct rcu_string *name;
u64 total_bytes;
int seeding_dev = 0;
int ret = 0;
goto error;
}
- device->name = kstrdup(device_path, GFP_NOFS);
- if (!device->name) {
+ name = rcu_string_strdup(device_path, GFP_NOFS);
+ if (!name) {
kfree(device);
ret = -ENOMEM;
goto error;
}
+ rcu_assign_pointer(device->name, name);
ret = find_next_devid(root, &device->devid);
if (ret) {
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
goto error;
}
trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans)) {
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
ret = PTR_ERR(trans);
goto error;
unlock_chunks(root);
btrfs_abort_transaction(trans, root, ret);
btrfs_end_transaction(trans, root);
- kfree(device->name);
+ rcu_string_free(device->name);
kfree(device);
error:
blkdev_put(bdev, FMODE_EXCL);
bio->bi_sector = bbio->stripes[dev_nr].physical >> 9;
dev = bbio->stripes[dev_nr].dev;
if (dev && dev->bdev && (rw != WRITE || dev->writeable)) {
+#ifdef DEBUG
+ struct rcu_string *name;
+
+ rcu_read_lock();
+ name = rcu_dereference(dev->name);
pr_debug("btrfs_map_bio: rw %d, secor=%llu, dev=%lu "
"(%s id %llu), size=%u\n", rw,
(u64)bio->bi_sector, (u_long)dev->bdev->bd_dev,
- dev->name, dev->devid, bio->bi_size);
+ name->str, dev->devid, bio->bi_size);
+ rcu_read_unlock();
+#endif
bio->bi_bdev = dev->bdev;
if (async_submit)
schedule_bio(root, dev, rw, bio);
key.offset = device->devid;
ret = btrfs_search_slot(NULL, dev_root, &key, path, 0, 0);
if (ret) {
- printk(KERN_WARNING "btrfs: no dev_stats entry found for device %s (devid %llu) (OK on first mount after mkfs)\n",
- device->name, (unsigned long long)device->devid);
+ printk_in_rcu(KERN_WARNING "btrfs: no dev_stats entry found for device %s (devid %llu) (OK on first mount after mkfs)\n",
+ rcu_str_deref(device->name),
+ (unsigned long long)device->devid);
__btrfs_reset_dev_stats(device);
device->dev_stats_valid = 1;
btrfs_release_path(path);
BUG_ON(!path);
ret = btrfs_search_slot(trans, dev_root, &key, path, -1, 1);
if (ret < 0) {
- printk(KERN_WARNING "btrfs: error %d while searching for dev_stats item for device %s!\n",
- ret, device->name);
+ printk_in_rcu(KERN_WARNING "btrfs: error %d while searching for dev_stats item for device %s!\n",
+ ret, rcu_str_deref(device->name));
goto out;
}
/* need to delete old one and insert a new one */
ret = btrfs_del_item(trans, dev_root, path);
if (ret != 0) {
- printk(KERN_WARNING "btrfs: delete too small dev_stats item for device %s failed %d!\n",
- device->name, ret);
+ printk_in_rcu(KERN_WARNING "btrfs: delete too small dev_stats item for device %s failed %d!\n",
+ rcu_str_deref(device->name), ret);
goto out;
}
ret = 1;
ret = btrfs_insert_empty_item(trans, dev_root, path,
&key, sizeof(*ptr));
if (ret < 0) {
- printk(KERN_WARNING "btrfs: insert dev_stats item for device %s failed %d!\n",
- device->name, ret);
+ printk_in_rcu(KERN_WARNING "btrfs: insert dev_stats item for device %s failed %d!\n",
+ rcu_str_deref(device->name), ret);
goto out;
}
}
{
if (!dev->dev_stats_valid)
return;
- printk_ratelimited(KERN_ERR
+ printk_ratelimited_in_rcu(KERN_ERR
"btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
- dev->name,
+ rcu_str_deref(dev->name),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_WRITE_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_READ_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_FLUSH_ERRS),
static void btrfs_dev_stat_print_on_load(struct btrfs_device *dev)
{
- printk(KERN_INFO "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
- dev->name,
+ printk_in_rcu(KERN_INFO "btrfs: bdev %s errs: wr %u, rd %u, flush %u, corrupt %u, gen %u\n",
+ rcu_str_deref(dev->name),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_WRITE_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_READ_ERRS),
btrfs_dev_stat_read(dev, BTRFS_DEV_STAT_FLUSH_ERRS),
/* the mode sent to blkdev_get */
fmode_t mode;
- char *name;
+ struct rcu_string *name;
/* the internal btrfs device id */
u64 devid;
(CONGESTION_ON_THRESH(congestion_kb) - \
(CONGESTION_ON_THRESH(congestion_kb) >> 2))
-
+static inline struct ceph_snap_context *page_snap_context(struct page *page)
+{
+ if (PagePrivate(page))
+ return (void *)page->private;
+ return NULL;
+}
/*
* Dirty a page. Optimistically adjust accounting, on the assumption
{
struct inode *inode;
struct ceph_inode_info *ci;
- struct ceph_snap_context *snapc = (void *)page->private;
+ struct ceph_snap_context *snapc = page_snap_context(page);
BUG_ON(!PageLocked(page));
- BUG_ON(!page->private);
BUG_ON(!PagePrivate(page));
BUG_ON(!page->mapping);
struct inode *inode = page->mapping ? page->mapping->host : NULL;
dout("%p releasepage %p idx %lu\n", inode, page, page->index);
WARN_ON(PageDirty(page));
- WARN_ON(page->private);
WARN_ON(PagePrivate(page));
return 0;
}
osdc = &fsc->client->osdc;
/* verify this is a writeable snap context */
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc == NULL) {
dout("writepage %p page %p not dirty?\n", inode, page);
goto out;
oldest = get_oldest_context(inode, &snap_size);
if (snapc->seq > oldest->seq) {
dout("writepage %p page %p snapc %p not writeable - noop\n",
- inode, page, (void *)page->private);
+ inode, page, snapc);
/* we should only noop if called by kswapd */
WARN_ON((current->flags & PF_MEMALLOC) == 0);
ceph_put_snap_context(oldest);
clear_bdi_congested(&fsc->backing_dev_info,
BLK_RW_ASYNC);
- ceph_put_snap_context((void *)page->private);
+ ceph_put_snap_context(page_snap_context(page));
page->private = 0;
ClearPagePrivate(page);
dout("unlocking %d %p\n", i, page);
}
/* only if matching snap context */
- pgsnapc = (void *)page->private;
+ pgsnapc = page_snap_context(page);
if (pgsnapc->seq > snapc->seq) {
dout("page snapc %p %lld > oldest %p %lld\n",
pgsnapc, pgsnapc->seq, snapc, snapc->seq);
BUG_ON(!ci->i_snap_realm);
down_read(&mdsc->snap_rwsem);
BUG_ON(!ci->i_snap_realm->cached_context);
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc && snapc != ci->i_head_snapc) {
/*
* this page is already dirty in another (older) snap
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
- sync_mm_rss(old_mm);
mm_release(tsk, old_mm);
if (old_mm) {
+ sync_mm_rss(old_mm);
/*
* Make sure that if there is a core dump in progress
* for the old mm, we get out and die instead of going
struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
struct hfsplus_vh *vh = sbi->s_vhdr;
struct hfsplus_vh *bvh = sbi->s_backup_vhdr;
+ u32 cnid = (unsigned long)dentry->d_fsdata;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
vh->finder_info[0] = bvh->finder_info[0] =
cpu_to_be32(parent_ino(dentry));
- /* Bootloader */
- vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(inode->i_ino);
+ /*
+ * Bootloader. Just using the inode here breaks in the case of
+ * hard links - the firmware wants the ID of the hard link file,
+ * but the inode points at the indirect inode
+ */
+ vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(cnid);
/* Per spec, the OS X system folder - same as finder_info[0] here */
vh->finder_info[5] = bvh->finder_info[5] =
DECLARE_COMPLETION_ONSTACK(wait);
struct bio *bio;
int ret = 0;
- unsigned int io_size;
+ u64 io_size;
loff_t start;
int offset;
#include <linux/kthread.h>
#include <linux/sunrpc/svcauth_gss.h>
#include <linux/sunrpc/bc_xprt.h>
-#include <linux/nsproxy.h>
#include <net/inet_sock.h>
{
int ret;
- ret = svc_create_xprt(serv, "tcp", xprt->xprt_net, PF_INET,
+ ret = svc_create_xprt(serv, "tcp", &init_net, PF_INET,
nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
if (ret <= 0)
goto out_err;
dprintk("NFS: Callback listener port = %u (af %u)\n",
nfs_callback_tcpport, PF_INET);
- ret = svc_create_xprt(serv, "tcp", xprt->xprt_net, PF_INET6,
+ ret = svc_create_xprt(serv, "tcp", &init_net, PF_INET6,
nfs_callback_set_tcpport, SVC_SOCK_ANONYMOUS);
if (ret > 0) {
nfs_callback_tcpport6 = ret;
* fore channel connection.
* Returns the input port (0) and sets the svc_serv bc_xprt on success
*/
- ret = svc_create_xprt(serv, "tcp-bc", xprt->xprt_net, PF_INET, 0,
+ ret = svc_create_xprt(serv, "tcp-bc", &init_net, PF_INET, 0,
SVC_SOCK_ANONYMOUS);
if (ret < 0) {
rqstp = ERR_PTR(ret);
char svc_name[12];
int ret = 0;
int minorversion_setup;
- struct net *net = current->nsproxy->net_ns;
+ struct net *net = &init_net;
mutex_lock(&nfs_callback_mutex);
if (cb_info->users++ || cb_info->task != NULL) {
cb_info->users--;
if (cb_info->users == 0 && cb_info->task != NULL) {
kthread_stop(cb_info->task);
- svc_shutdown_net(cb_info->serv, current->nsproxy->net_ns);
+ svc_shutdown_net(cb_info->serv, &init_net);
svc_exit_thread(cb_info->rqst);
cb_info->serv = NULL;
cb_info->rqst = NULL;
args->csa_nrclists = ntohl(*p++);
args->csa_rclists = NULL;
if (args->csa_nrclists) {
- args->csa_rclists = kmalloc(args->csa_nrclists *
- sizeof(*args->csa_rclists),
- GFP_KERNEL);
+ args->csa_rclists = kmalloc_array(args->csa_nrclists,
+ sizeof(*args->csa_rclists),
+ GFP_KERNEL);
if (unlikely(args->csa_rclists == NULL))
goto out;
const struct cb_sequenceres *res)
{
__be32 *p;
- unsigned status = res->csr_status;
+ __be32 status = res->csr_status;
if (unlikely(status != 0))
goto out;
static void nfs4_shutdown_session(struct nfs_client *clp)
{
if (nfs4_has_session(clp)) {
- nfs4_deviceid_purge_client(clp);
nfs4_destroy_session(clp->cl_session);
nfs4_destroy_clientid(clp);
}
smp_rmb();
- BUG_ON(clp->cl_cons_state != NFS_CS_READY);
-
dprintk("<-- %s found nfs_client %p for %s\n",
__func__, clp, cl_init->hostname ?: "");
return clp;
dreq->error = -EIO;
spin_unlock(cinfo.lock);
}
+ nfs_release_request(req);
}
nfs_pageio_complete(&desc);
nfs_list_remove_request(req);
if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES) {
/* Note the rewrite will go through mds */
- kref_get(&req->wb_kref);
nfs_mark_request_commit(req, NULL, &cinfo);
- }
+ } else
+ nfs_release_request(req);
nfs_unlock_and_release_request(req);
}
if (dreq->flags == NFS_ODIRECT_RESCHED_WRITES)
bit = NFS_IOHDR_NEED_RESCHED;
else if (dreq->flags == 0) {
- memcpy(&dreq->verf, &req->wb_verf,
+ memcpy(&dreq->verf, hdr->verf,
sizeof(dreq->verf));
bit = NFS_IOHDR_NEED_COMMIT;
dreq->flags = NFS_ODIRECT_DO_COMMIT;
} else if (dreq->flags == NFS_ODIRECT_DO_COMMIT) {
- if (memcmp(&dreq->verf, &req->wb_verf, sizeof(dreq->verf))) {
+ if (memcmp(&dreq->verf, hdr->verf, sizeof(dreq->verf))) {
dreq->flags = NFS_ODIRECT_RESCHED_WRITES;
bit = NFS_IOHDR_NEED_RESCHED;
} else
static const struct cred *id_resolver_cache;
static struct key_type key_type_id_resolver_legacy;
+struct idmap {
+ struct rpc_pipe *idmap_pipe;
+ struct key_construction *idmap_key_cons;
+ struct mutex idmap_mutex;
+};
/**
* nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields
name, namelen, type, data,
data_size, NULL);
if (ret < 0) {
+ mutex_lock(&idmap->idmap_mutex);
ret = nfs_idmap_request_key(&key_type_id_resolver_legacy,
name, namelen, type, data,
data_size, idmap);
+ mutex_unlock(&idmap->idmap_mutex);
}
return ret;
}
/* idmap classic begins here */
module_param(nfs_idmap_cache_timeout, int, 0644);
-struct idmap {
- struct rpc_pipe *idmap_pipe;
- struct key_construction *idmap_key_cons;
-};
-
enum {
Opt_find_uid, Opt_find_gid, Opt_find_user, Opt_find_group, Opt_find_err
};
return error;
}
idmap->idmap_pipe = pipe;
+ mutex_init(&idmap->idmap_mutex);
clp->cl_idmap = idmap;
return 0;
nfsi->delegation_state = 0;
init_rwsem(&nfsi->rwsem);
nfsi->layout = NULL;
- atomic_set(&nfsi->commit_info.rpcs_out, 0);
#endif
}
INIT_LIST_HEAD(&nfsi->commit_info.list);
nfsi->npages = 0;
nfsi->commit_info.ncommit = 0;
+ atomic_set(&nfsi->commit_info.rpcs_out, 0);
atomic_set(&nfsi->silly_count, 1);
INIT_HLIST_HEAD(&nfsi->silly_list);
init_waitqueue_head(&nfsi->waitqueue);
extern const struct nfs4_minor_version_ops *nfs_v4_minor_ops[];
-extern const u32 nfs4_fattr_bitmap[2];
+extern const u32 nfs4_fattr_bitmap[3];
extern const u32 nfs4_statfs_bitmap[2];
extern const u32 nfs4_pathconf_bitmap[2];
extern const u32 nfs4_fsinfo_bitmap[3];
return -EINVAL;
case -NFS4ERR_SHARE_DENIED:
return -EACCES;
+ case -NFS4ERR_MINOR_VERS_MISMATCH:
+ return -EPROTONOSUPPORT;
default:
dprintk("%s could not handle NFSv4 error %d\n",
__func__, -err);
/*
* This is our standard bitmap for GETATTR requests.
*/
-const u32 nfs4_fattr_bitmap[2] = {
+const u32 nfs4_fattr_bitmap[3] = {
FATTR4_WORD0_TYPE
| FATTR4_WORD0_CHANGE
| FATTR4_WORD0_SIZE
| FATTR4_WORD1_TIME_MODIFY
};
+static const u32 nfs4_pnfs_open_bitmap[3] = {
+ FATTR4_WORD0_TYPE
+ | FATTR4_WORD0_CHANGE
+ | FATTR4_WORD0_SIZE
+ | FATTR4_WORD0_FSID
+ | FATTR4_WORD0_FILEID,
+ FATTR4_WORD1_MODE
+ | FATTR4_WORD1_NUMLINKS
+ | FATTR4_WORD1_OWNER
+ | FATTR4_WORD1_OWNER_GROUP
+ | FATTR4_WORD1_RAWDEV
+ | FATTR4_WORD1_SPACE_USED
+ | FATTR4_WORD1_TIME_ACCESS
+ | FATTR4_WORD1_TIME_METADATA
+ | FATTR4_WORD1_TIME_MODIFY,
+ FATTR4_WORD2_MDSTHRESHOLD
+};
+
const u32 nfs4_statfs_bitmap[2] = {
FATTR4_WORD0_FILES_AVAIL
| FATTR4_WORD0_FILES_FREE
p->o_arg.name = &dentry->d_name;
p->o_arg.server = server;
p->o_arg.bitmask = server->attr_bitmask;
+ p->o_arg.open_bitmap = &nfs4_fattr_bitmap[0];
p->o_arg.claim = NFS4_OPEN_CLAIM_NULL;
if (attrs != NULL && attrs->ia_valid != 0) {
__be32 verf[2];
opendata->f_attr.mdsthreshold = pnfs_mdsthreshold_alloc();
if (!opendata->f_attr.mdsthreshold)
goto err_opendata_put;
+ opendata->o_arg.open_bitmap = &nfs4_pnfs_open_bitmap[0];
}
if (dentry->d_inode != NULL)
opendata->state = nfs4_get_open_state(dentry->d_inode, sp);
struct nfs4_state *res;
int status;
+ fmode &= FMODE_READ|FMODE_WRITE;
do {
status = _nfs4_do_open(dir, dentry, fmode, flags, sattr, cred,
&res, ctx_th);
nfs_fattr_init(fattr);
+ /* Deal with open(O_TRUNC) */
+ if (sattr->ia_valid & ATTR_OPEN)
+ sattr->ia_valid &= ~(ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
+
+ /* Optimization: if the end result is no change, don't RPC */
+ if ((sattr->ia_valid & ~(ATTR_FILE)) == 0)
+ return 0;
+
/* Search for an existing open(O_WRITE) file */
if (sattr->ia_valid & ATTR_FILE) {
struct nfs_open_context *ctx;
}
}
- /* Deal with open(O_TRUNC) */
- if (sattr->ia_valid & ATTR_OPEN)
- sattr->ia_valid &= ~(ATTR_MTIME|ATTR_CTIME|ATTR_OPEN);
-
status = nfs4_do_setattr(inode, cred, fattr, sattr, state);
if (status == 0)
nfs_setattr_update_inode(inode, sattr);
status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (status)
- pr_warn("NFS: Got error %d from the server %s on "
+ dprintk("NFS: Got error %d from the server %s on "
"DESTROY_CLIENTID.", status, clp->cl_hostname);
return status;
}
status = rpc_call_sync(session->clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (status)
- printk(KERN_WARNING
- "NFS: Got error %d from the server on DESTROY_SESSION. "
+ dprintk("NFS: Got error %d from the server on DESTROY_SESSION. "
"Session has been destroyed regardless...\n", status);
dprintk("<-- nfs4_proc_destroy_session\n");
return nfs4_wait_on_slot_tbl(&ses->fc_slot_table);
}
+static void nfs41_finish_session_reset(struct nfs_client *clp)
+{
+ clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
+ clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
+ /* create_session negotiated new slot table */
+ clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state);
+ clear_bit(NFS4CLNT_BIND_CONN_TO_SESSION, &clp->cl_state);
+ nfs41_setup_state_renewal(clp);
+}
+
int nfs41_init_clientid(struct nfs_client *clp, struct rpc_cred *cred)
{
int status;
status = nfs4_proc_create_session(clp, cred);
if (status != 0)
goto out;
- clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state);
- nfs41_setup_state_renewal(clp);
+ nfs41_finish_session_reset(clp);
nfs_mark_client_ready(clp, NFS_CS_READY);
out:
return status;
status = nfs4_handle_reclaim_lease_error(clp, status);
goto out;
}
- clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state);
- /* create_session negotiated new slot table */
- clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state);
- clear_bit(NFS4CLNT_BIND_CONN_TO_SESSION, &clp->cl_state);
+ nfs41_finish_session_reset(clp);
dprintk("%s: session reset was successful for server %s!\n",
__func__, clp->cl_hostname);
-
- /* Let the state manager reestablish state */
- if (!test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state))
- nfs41_setup_state_renewal(clp);
out:
if (cred)
put_rpccred(cred);
}
static void encode_getfattr_open(struct xdr_stream *xdr, const u32 *bitmask,
+ const u32 *open_bitmap,
struct compound_hdr *hdr)
{
encode_getattr_three(xdr,
- bitmask[0] & nfs4_fattr_bitmap[0],
- bitmask[1] & nfs4_fattr_bitmap[1],
- bitmask[2] & FATTR4_WORD2_MDSTHRESHOLD,
+ bitmask[0] & open_bitmap[0],
+ bitmask[1] & open_bitmap[1],
+ bitmask[2] & open_bitmap[2],
hdr);
}
encode_putfh(xdr, args->fh, &hdr);
encode_open(xdr, args, &hdr);
encode_getfh(xdr, &hdr);
- encode_getfattr_open(xdr, args->bitmask, &hdr);
+ encode_getfattr_open(xdr, args->bitmask, args->open_bitmap, &hdr);
encode_nops(&hdr);
}
if (unlikely(bitmap[2] & (FATTR4_WORD2_MDSTHRESHOLD - 1U)))
return -EIO;
- if (likely(bitmap[2] & FATTR4_WORD2_MDSTHRESHOLD)) {
+ if (bitmap[2] & FATTR4_WORD2_MDSTHRESHOLD) {
+ /* Did the server return an unrequested attribute? */
+ if (unlikely(res == NULL))
+ return -EREMOTEIO;
p = xdr_inline_decode(xdr, 4);
if (unlikely(!p))
goto out_overflow;
__func__);
status = decode_first_threshold_item4(xdr, res);
+ bitmap[2] &= ~FATTR4_WORD2_MDSTHRESHOLD;
}
return status;
out_overflow:
spin_lock(&pnfs_spinlock);
local = find_pnfs_driver_locked(id);
+ if (local != NULL && !try_module_get(local->owner)) {
+ dprintk("%s: Could not grab reference on module\n", __func__);
+ local = NULL;
+ }
spin_unlock(&pnfs_spinlock);
return local;
}
if (nfss->pnfs_curr_ld) {
if (nfss->pnfs_curr_ld->clear_layoutdriver)
nfss->pnfs_curr_ld->clear_layoutdriver(nfss);
+ /* Decrement the MDS count. Purge the deviceid cache if zero */
+ if (atomic_dec_and_test(&nfss->nfs_client->cl_mds_count))
+ nfs4_deviceid_purge_client(nfss->nfs_client);
module_put(nfss->pnfs_curr_ld->owner);
}
nfss->pnfs_curr_ld = NULL;
goto out_no_driver;
}
}
- if (!try_module_get(ld_type->owner)) {
- dprintk("%s: Could not grab reference on module\n", __func__);
- goto out_no_driver;
- }
server->pnfs_curr_ld = ld_type;
if (ld_type->set_layoutdriver
&& ld_type->set_layoutdriver(server, mntfh)) {
module_put(ld_type->owner);
goto out_no_driver;
}
+ /* Bump the MDS count */
+ atomic_inc(&server->nfs_client->cl_mds_count);
dprintk("%s: pNFS module for %u set\n", __func__, id);
return;
pnfs_use_threshold(struct nfs4_threshold **dst, struct nfs4_threshold *src,
struct nfs_server *nfss)
{
- return (dst && src && src->bm != 0 &&
+ return (dst && src && src->bm != 0 && nfss->pnfs_curr_ld &&
nfss->pnfs_curr_ld->id == src->l_type);
}
/* Emulate the eof flag, which isn't normally needed in NFSv2
* as it is guaranteed to always return the file attributes
*/
- if (data->args.offset + data->args.count >= data->res.fattr->size)
+ if (data->args.offset + data->res.count >= data->res.fattr->size)
data->res.eof = 1;
}
return 0;
if (data == NULL)
goto out_no_data;
+ args->version = NFS_DEFAULT_VERSION;
switch (data->version) {
case 1:
data->namlen = 0;
if (data == NULL)
goto out_no_data;
+ args->version = 4;
+
switch (data->version) {
case 1:
if (data->host_addrlen > sizeof(args->nfs_server.address))
INIT_LIST_HEAD(&hdr->rpc_list);
spin_lock_init(&hdr->lock);
atomic_set(&hdr->refcnt, 0);
+ hdr->verf = &p->verf;
}
return p;
}
goto next;
}
if (test_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags)) {
+ memcpy(&req->wb_verf, hdr->verf, sizeof(req->wb_verf));
nfs_mark_request_commit(req, hdr->lseg, &cinfo);
goto next;
}
struct nfs_write_data *data = calldata;
struct nfs_pgio_header *hdr = data->header;
int status = data->task.tk_status;
- struct nfs_page *req = hdr->req;
if ((status >= 0) && nfs_write_need_commit(data)) {
spin_lock(&hdr->lock);
if (test_bit(NFS_IOHDR_NEED_RESCHED, &hdr->flags))
; /* Do nothing */
else if (!test_and_set_bit(NFS_IOHDR_NEED_COMMIT, &hdr->flags))
- memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
- else if (memcmp(&req->wb_verf, &data->verf, sizeof(req->wb_verf)))
+ memcpy(hdr->verf, &data->verf, sizeof(*hdr->verf));
+ else if (memcmp(hdr->verf, &data->verf, sizeof(*hdr->verf)))
set_bit(NFS_IOHDR_NEED_RESCHED, &hdr->flags);
spin_unlock(&hdr->lock);
}
struct nfsd4_session *ses;
int mem;
- BUG_ON(!spin_is_locked(&client_lock));
+ lockdep_assert_held(&client_lock);
ses = container_of(kref, struct nfsd4_session, se_ref);
nfsd4_del_conns(ses);
spin_lock(&nfsd_drc_lock);
static inline void
free_client(struct nfs4_client *clp)
{
- BUG_ON(!spin_is_locked(&client_lock));
+ lockdep_assert_held(&client_lock);
while (!list_empty(&clp->cl_sessions)) {
struct nfsd4_session *ses;
ses = list_entry(clp->cl_sessions.next, struct nfsd4_session,
while (!list_empty(head)) {
ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
if (!test_bit(NILFS_I_UPDATED, &ii->i_state))
continue;
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
return rc;
}
-int pstore_fill_super(struct super_block *sb, void *data, int silent)
+static int pstore_fill_super(struct super_block *sb, void *data, int silent)
{
struct inode *inode;
* as we can from the end of the buffer.
*/
static void pstore_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- unsigned long size, total = 0;
- char *dst;
+ unsigned long total = 0;
const char *why;
u64 id;
- int hsize, ret;
unsigned int part = 1;
unsigned long flags = 0;
int is_locked = 0;
+ int ret;
why = get_reason_str(reason);
spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
while (total < kmsg_bytes) {
+ char *dst;
+ unsigned long size;
+ int hsize;
+ size_t len;
+
dst = psinfo->buf;
hsize = sprintf(dst, "%s#%d Part%d\n", why, oopscount, part);
size = psinfo->bufsize - hsize;
dst += hsize;
- l2_cpy = min(l2, size);
- l1_cpy = min(l1, size - l2_cpy);
-
- if (l1_cpy + l2_cpy == 0)
+ if (!kmsg_dump_get_buffer(dumper, true, dst, size, &len))
break;
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
-
ret = psinfo->write(PSTORE_TYPE_DMESG, reason, &id, part,
- hsize + l1_cpy + l2_cpy, psinfo);
+ hsize + len, psinfo);
if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted())
pstore_new_entry = 1;
- l1 -= l1_cpy;
- l2 -= l2_cpy;
- total += l1_cpy + l2_cpy;
+
+ total += hsize + len;
part++;
}
if (in_nmi()) {
time->tv_sec = 0;
time->tv_nsec = 0;
+ /* Update old/shadowed buffer. */
+ persistent_ram_save_old(prz);
size = persistent_ram_old_size(prz);
*buf = kmalloc(size, GFP_KERNEL);
if (*buf == NULL)
return -EINVAL;
persistent_ram_free_old(cxt->przs[id]);
+ persistent_ram_zap(cxt->przs[id]);
return 0;
}
persistent_ram_update_ecc(prz, start, count);
}
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
+void persistent_ram_save_old(struct persistent_ram_zone *prz)
{
struct persistent_ram_buffer *buffer = prz->buffer;
size_t size = buffer_size(prz);
size_t start = buffer_start(prz);
- char *dest;
- persistent_ram_ecc_old(prz);
+ if (!size)
+ return;
- dest = kmalloc(size, GFP_KERNEL);
- if (dest == NULL) {
+ if (!prz->old_log) {
+ persistent_ram_ecc_old(prz);
+ prz->old_log = kmalloc(size, GFP_KERNEL);
+ }
+ if (!prz->old_log) {
pr_err("persistent_ram: failed to allocate buffer\n");
return;
}
- prz->old_log = dest;
prz->old_log_size = size;
memcpy(prz->old_log, &buffer->data[start], size - start);
memcpy(prz->old_log + size - start, &buffer->data[0], start);
prz->old_log_size = 0;
}
+void persistent_ram_zap(struct persistent_ram_zone *prz)
+{
+ atomic_set(&prz->buffer->start, 0);
+ atomic_set(&prz->buffer->size, 0);
+ persistent_ram_update_header_ecc(prz);
+}
+
static void *persistent_ram_vmap(phys_addr_t start, size_t size)
{
struct page **pages;
" size %zu, start %zu\n",
buffer_size(prz), buffer_start(prz));
persistent_ram_save_old(prz);
+ return 0;
}
} else {
pr_info("persistent_ram: no valid data in buffer"
}
prz->buffer->sig = PERSISTENT_RAM_SIG;
- atomic_set(&prz->buffer->start, 0);
- atomic_set(&prz->buffer->size, 0);
+ persistent_ram_zap(prz);
return 0;
}
goto err;
persistent_ram_post_init(prz, ecc);
- persistent_ram_update_header_ecc(prz);
return prz;
err:
struct dentry *dent;
struct ubifs_debug_info *d = c->dbg;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
n = snprintf(d->dfs_dir_name, UBIFS_DFS_DIR_LEN + 1, UBIFS_DFS_DIR_NAME,
*/
void dbg_debugfs_exit_fs(struct ubifs_info *c)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(c->dbg->dfs_dir);
}
const char *fname;
struct dentry *dent;
- if (!IS_ENABLED(DEBUG_FS))
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
return 0;
fname = "ubifs";
*/
void dbg_debugfs_exit(void)
{
- if (IS_ENABLED(DEBUG_FS))
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
debugfs_remove_recursive(dfs_rootdir);
}
}
dbg_find("LEB %d, dirty %d and free %d flags %#x", lp->lnum, lp->dirty,
lp->free, lp->flags);
- ubifs_assert(lp->flags | LPROPS_TAKEN);
- ubifs_assert(lp->flags | LPROPS_INDEX);
+ ubifs_assert(lp->flags & LPROPS_TAKEN);
+ ubifs_assert(lp->flags & LPROPS_INDEX);
return lnum;
}
#include <linux/seq_file.h>
#include <linux/bitmap.h>
#include <linux/crc-itu-t.h>
+#include <linux/log2.h>
#include <asm/byteorder.h>
#include "udf_sb.h"
return ret;
}
+static int udf_load_sparable_map(struct super_block *sb,
+ struct udf_part_map *map,
+ struct sparablePartitionMap *spm)
+{
+ uint32_t loc;
+ uint16_t ident;
+ struct sparingTable *st;
+ struct udf_sparing_data *sdata = &map->s_type_specific.s_sparing;
+ int i;
+ struct buffer_head *bh;
+
+ map->s_partition_type = UDF_SPARABLE_MAP15;
+ sdata->s_packet_len = le16_to_cpu(spm->packetLength);
+ if (!is_power_of_2(sdata->s_packet_len)) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Invalid packet length %u\n",
+ (unsigned)sdata->s_packet_len);
+ return -EIO;
+ }
+ if (spm->numSparingTables > 4) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Too many sparing tables (%d)\n",
+ (int)spm->numSparingTables);
+ return -EIO;
+ }
+
+ for (i = 0; i < spm->numSparingTables; i++) {
+ loc = le32_to_cpu(spm->locSparingTable[i]);
+ bh = udf_read_tagged(sb, loc, loc, &ident);
+ if (!bh)
+ continue;
+
+ st = (struct sparingTable *)bh->b_data;
+ if (ident != 0 ||
+ strncmp(st->sparingIdent.ident, UDF_ID_SPARING,
+ strlen(UDF_ID_SPARING)) ||
+ sizeof(*st) + le16_to_cpu(st->reallocationTableLen) >
+ sb->s_blocksize) {
+ brelse(bh);
+ continue;
+ }
+
+ sdata->s_spar_map[i] = bh;
+ }
+ map->s_partition_func = udf_get_pblock_spar15;
+ return 0;
+}
+
static int udf_load_logicalvol(struct super_block *sb, sector_t block,
struct kernel_lb_addr *fileset)
{
struct logicalVolDesc *lvd;
- int i, j, offset;
+ int i, offset;
uint8_t type;
struct udf_sb_info *sbi = UDF_SB(sb);
struct genericPartitionMap *gpm;
uint16_t ident;
struct buffer_head *bh;
+ unsigned int table_len;
int ret = 0;
bh = udf_read_tagged(sb, block, block, &ident);
return 1;
BUG_ON(ident != TAG_IDENT_LVD);
lvd = (struct logicalVolDesc *)bh->b_data;
-
- i = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
- if (i != 0) {
- ret = i;
+ table_len = le32_to_cpu(lvd->mapTableLength);
+ if (sizeof(*lvd) + table_len > sb->s_blocksize) {
+ udf_err(sb, "error loading logical volume descriptor: "
+ "Partition table too long (%u > %lu)\n", table_len,
+ sb->s_blocksize - sizeof(*lvd));
goto out_bh;
}
+ ret = udf_sb_alloc_partition_maps(sb, le32_to_cpu(lvd->numPartitionMaps));
+ if (ret)
+ goto out_bh;
+
for (i = 0, offset = 0;
- i < sbi->s_partitions && offset < le32_to_cpu(lvd->mapTableLength);
+ i < sbi->s_partitions && offset < table_len;
i++, offset += gpm->partitionMapLength) {
struct udf_part_map *map = &sbi->s_partmaps[i];
gpm = (struct genericPartitionMap *)
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_SPARABLE,
strlen(UDF_ID_SPARABLE))) {
- uint32_t loc;
- struct sparingTable *st;
- struct sparablePartitionMap *spm =
- (struct sparablePartitionMap *)gpm;
-
- map->s_partition_type = UDF_SPARABLE_MAP15;
- map->s_type_specific.s_sparing.s_packet_len =
- le16_to_cpu(spm->packetLength);
- for (j = 0; j < spm->numSparingTables; j++) {
- struct buffer_head *bh2;
-
- loc = le32_to_cpu(
- spm->locSparingTable[j]);
- bh2 = udf_read_tagged(sb, loc, loc,
- &ident);
- map->s_type_specific.s_sparing.
- s_spar_map[j] = bh2;
-
- if (bh2 == NULL)
- continue;
-
- st = (struct sparingTable *)bh2->b_data;
- if (ident != 0 || strncmp(
- st->sparingIdent.ident,
- UDF_ID_SPARING,
- strlen(UDF_ID_SPARING))) {
- brelse(bh2);
- map->s_type_specific.s_sparing.
- s_spar_map[j] = NULL;
- }
- }
- map->s_partition_func = udf_get_pblock_spar15;
+ if (udf_load_sparable_map(sb, map,
+ (struct sparablePartitionMap *)gpm) < 0)
+ goto out_bh;
} else if (!strncmp(upm2->partIdent.ident,
UDF_ID_METADATA,
strlen(UDF_ID_METADATA))) {
goto restart;
}
+ xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
trace_xfs_alloc_size_neither(args);
args->agbno = NULLAGBLOCK;
return 0;
DECLARE_COMPLETION_ONSTACK(done);
args->done = &done;
- INIT_WORK(&args->work, xfs_alloc_vextent_worker);
+ INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
queue_work(xfs_alloc_wq, &args->work);
wait_for_completion(&done);
return args->result;
imap_valid = 0;
}
} else {
- if (PageUptodate(page)) {
+ if (PageUptodate(page))
ASSERT(buffer_mapped(bh));
- imap_valid = 0;
- }
+ /*
+ * This buffer is not uptodate and will not be
+ * written to disk. Ensure that we will put any
+ * subsequent writeable buffers into a new
+ * ioend.
+ */
+ imap_valid = 0;
continue;
}
bp->b_length = numblks;
bp->b_io_length = numblks;
bp->b_flags = flags;
-
- /*
- * We do not set the block number here in the buffer because we have not
- * finished initialising the buffer. We insert the buffer into the cache
- * in this state, so this ensures that we are unable to do IO on a
- * buffer that hasn't been fully initialised.
- */
- bp->b_bn = XFS_BUF_DADDR_NULL;
+ bp->b_bn = blkno;
atomic_set(&bp->b_pin_count, 0);
init_waitqueue_head(&bp->b_waiters);
if (bp != new_bp)
xfs_buf_free(new_bp);
- /*
- * Now we have a workable buffer, fill in the block number so
- * that we can do IO on it.
- */
- bp->b_bn = blkno;
bp->b_io_length = bp->b_length;
found:
int error, i;
xfs_buf_t *bp;
- bp = xfs_buf_alloc(target, 0, numblks, 0);
+ bp = xfs_buf_alloc(target, XFS_BUF_DADDR_NULL, numblks, 0);
if (unlikely(bp == NULL))
goto fail;
goto out_unlock;
}
+ /*
+ * Stale inode items should force out the iclog.
+ */
+ if (ip->i_flags & XFS_ISTALE) {
+ rval = XFS_ITEM_PINNED;
+ goto out_unlock;
+ }
+
/*
* Someone else is already flushing the inode. Nothing we can do
* here but wait for the flush to finish and remove the item from
goto out_unlock;
}
- /*
- * Stale inode items should force out the iclog.
- */
- if (ip->i_flags & XFS_ISTALE) {
- xfs_ifunlock(ip);
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return XFS_ITEM_PINNED;
- }
-
ASSERT(iip->ili_fields != 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
ASSERT(iip->ili_logged == 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
kmem_zone_t *xfs_log_ticket_zone;
/* Local miscellaneous function prototypes */
-STATIC int xlog_commit_record(struct log *log, struct xlog_ticket *ticket,
- xlog_in_core_t **, xfs_lsn_t *);
+STATIC int
+xlog_commit_record(
+ struct xlog *log,
+ struct xlog_ticket *ticket,
+ struct xlog_in_core **iclog,
+ xfs_lsn_t *commitlsnp);
+
STATIC xlog_t * xlog_alloc_log(xfs_mount_t *mp,
xfs_buftarg_t *log_target,
xfs_daddr_t blk_offset,
int num_bblks);
-STATIC int xlog_space_left(struct log *log, atomic64_t *head);
+STATIC int
+xlog_space_left(
+ struct xlog *log,
+ atomic64_t *head);
STATIC int xlog_sync(xlog_t *log, xlog_in_core_t *iclog);
STATIC void xlog_dealloc_log(xlog_t *log);
int eventual_size);
STATIC void xlog_state_want_sync(xlog_t *log, xlog_in_core_t *iclog);
-STATIC void xlog_grant_push_ail(struct log *log,
- int need_bytes);
+STATIC void
+xlog_grant_push_ail(
+ struct xlog *log,
+ int need_bytes);
STATIC void xlog_regrant_reserve_log_space(xlog_t *log,
xlog_ticket_t *ticket);
STATIC void xlog_ungrant_log_space(xlog_t *log,
#if defined(DEBUG)
STATIC void xlog_verify_dest_ptr(xlog_t *log, char *ptr);
-STATIC void xlog_verify_grant_tail(struct log *log);
+STATIC void
+xlog_verify_grant_tail(
+ struct xlog *log);
STATIC void xlog_verify_iclog(xlog_t *log, xlog_in_core_t *iclog,
int count, boolean_t syncing);
STATIC void xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
static void
xlog_grant_sub_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
static void
xlog_grant_add_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
static inline int
xlog_ticket_reservation(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic)
{
STATIC bool
xlog_grant_head_wake(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
int *free_bytes)
{
STATIC int
xlog_grant_head_wait(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int need_bytes)
*/
STATIC int
xlog_grant_head_check(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int *need_bytes)
struct xfs_mount *mp,
struct xlog_ticket *tic)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int need_bytes;
int error = 0;
bool permanent,
uint t_type)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_ticket *tic;
int need_bytes;
int error = 0;
struct xlog_in_core **iclog,
uint flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
xfs_lsn_t lsn = 0;
if (XLOG_FORCED_SHUTDOWN(log) ||
void
xfs_log_unmount(xfs_mount_t *mp)
{
+ cancel_delayed_work_sync(&mp->m_sync_work);
xfs_trans_ail_destroy(mp);
xlog_dealloc_log(mp->m_log);
}
xfs_log_space_wake(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int free_bytes;
if (XLOG_FORCED_SHUTDOWN(log))
xlog_assign_tail_lsn_locked(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xfs_log_item *lip;
xfs_lsn_t tail_lsn;
*/
STATIC int
xlog_space_left(
- struct log *log,
+ struct xlog *log,
atomic64_t *head)
{
int free_bytes;
*/
STATIC int
xlog_commit_record(
- struct log *log,
+ struct xlog *log,
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
xfs_lsn_t *commitlsnp)
*/
STATIC void
xlog_grant_push_ail(
- struct log *log,
+ struct xlog *log,
int need_bytes)
{
xfs_lsn_t threshold_lsn = 0;
static xlog_op_header_t *
xlog_write_setup_ophdr(
- struct log *log,
+ struct xlog *log,
struct xlog_op_header *ophdr,
struct xlog_ticket *ticket,
uint flags)
static int
xlog_write_copy_finish(
- struct log *log,
+ struct xlog *log,
struct xlog_in_core *iclog,
uint flags,
int *record_cnt,
*/
int
xlog_write(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket,
xfs_lsn_t *start_lsn,
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
xfs_lsn_t lsn;
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
int already_slept = 0;
*/
xlog_ticket_t *
xlog_ticket_alloc(
- struct log *log,
+ struct xlog *log,
int unit_bytes,
int cnt,
char client,
*/
void
xlog_verify_dest_ptr(
- struct log *log,
+ struct xlog *log,
char *ptr)
{
int i;
*/
STATIC void
xlog_verify_grant_tail(
- struct log *log)
+ struct xlog *log)
{
int tail_cycle, tail_blocks;
int cycle, space;
*/
static struct xlog_ticket *
xlog_cil_ticket_alloc(
- struct log *log)
+ struct xlog *log)
{
struct xlog_ticket *tic;
*/
void
xlog_cil_init_post_recovery(
- struct log *log)
+ struct xlog *log)
{
log->l_cilp->xc_ctx->ticket = xlog_cil_ticket_alloc(log);
log->l_cilp->xc_ctx->sequence = 1;
*/
STATIC void
xfs_cil_prepare_item(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *lv,
int *len,
int *diff_iovecs)
*/
static void
xlog_cil_insert_items(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket)
{
*/
STATIC int
xlog_cil_push(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
struct xfs_log_vec *lv;
*/
static void
xlog_cil_push_background(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
static void
xlog_cil_push_foreground(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t push_seq)
{
struct xfs_cil *cil = log->l_cilp;
xfs_lsn_t *commit_lsn,
int flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int log_flags = 0;
struct xfs_log_vec *log_vector;
*/
xfs_lsn_t
xlog_cil_force_lsn(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t sequence)
{
struct xfs_cil *cil = log->l_cilp;
*/
int
xlog_cil_init(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil;
struct xfs_cil_ctx *ctx;
void
xlog_cil_destroy(
- struct log *log)
+ struct xlog *log)
{
if (log->l_cilp->xc_ctx) {
if (log->l_cilp->xc_ctx->ticket)
#define __XFS_LOG_PRIV_H__
struct xfs_buf;
-struct log;
+struct xlog;
struct xlog_ticket;
struct xfs_mount;
struct xlog_in_core *ic_next;
struct xlog_in_core *ic_prev;
struct xfs_buf *ic_bp;
- struct log *ic_log;
+ struct xlog *ic_log;
int ic_size;
int ic_offset;
int ic_bwritecnt;
* operations almost as efficient as the old logging methods.
*/
struct xfs_cil {
- struct log *xc_log;
+ struct xlog *xc_log;
struct list_head xc_cil;
spinlock_t xc_cil_lock;
struct xfs_cil_ctx *xc_ctx;
* overflow 31 bits worth of byte offset, so using a byte number will mean
* that round off problems won't occur when releasing partial reservations.
*/
-typedef struct log {
+typedef struct xlog {
/* The following fields don't need locking */
struct xfs_mount *l_mp; /* mount point */
struct xfs_ail *l_ailp; /* AIL log is working with */
extern void xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
extern kmem_zone_t *xfs_log_ticket_zone;
-struct xlog_ticket *xlog_ticket_alloc(struct log *log, int unit_bytes,
- int count, char client, bool permanent,
- xfs_km_flags_t alloc_flags);
+struct xlog_ticket *
+xlog_ticket_alloc(
+ struct xlog *log,
+ int unit_bytes,
+ int count,
+ char client,
+ bool permanent,
+ xfs_km_flags_t alloc_flags);
static inline void
}
void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
-int xlog_write(struct log *log, struct xfs_log_vec *log_vector,
- struct xlog_ticket *tic, xfs_lsn_t *start_lsn,
- xlog_in_core_t **commit_iclog, uint flags);
+int
+xlog_write(
+ struct xlog *log,
+ struct xfs_log_vec *log_vector,
+ struct xlog_ticket *tic,
+ xfs_lsn_t *start_lsn,
+ struct xlog_in_core **commit_iclog,
+ uint flags);
/*
* When we crack an atomic LSN, we sample it first so that the value will not
/*
* Committed Item List interfaces
*/
-int xlog_cil_init(struct log *log);
-void xlog_cil_init_post_recovery(struct log *log);
-void xlog_cil_destroy(struct log *log);
+int
+xlog_cil_init(struct xlog *log);
+void
+xlog_cil_init_post_recovery(struct xlog *log);
+void
+xlog_cil_destroy(struct xlog *log);
/*
* CIL force routines
*/
-xfs_lsn_t xlog_cil_force_lsn(struct log *log, xfs_lsn_t sequence);
+xfs_lsn_t
+xlog_cil_force_lsn(
+ struct xlog *log,
+ xfs_lsn_t sequence);
static inline void
-xlog_cil_force(struct log *log)
+xlog_cil_force(struct xlog *log)
{
xlog_cil_force_lsn(log, log->l_cilp->xc_current_sequence);
}
STATIC int
xlog_recover_add_to_cont_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
*/
STATIC int
xlog_recover_add_to_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
*/
STATIC int
xlog_recover_reorder_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
int pass)
{
xlog_recover_item_t *item, *n;
*/
STATIC int
xlog_recover_buffer_pass1(
- struct log *log,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover_item *item)
{
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
struct list_head *bucket;
*/
STATIC int
xlog_check_buffer_cancelled(
- struct log *log,
+ struct xlog *log,
xfs_daddr_t blkno,
uint len,
ushort flags)
STATIC int
xlog_recover_commit_pass1(
- struct log *log,
- struct xlog_recover *trans,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS1);
STATIC int
xlog_recover_commit_pass2(
- struct log *log,
- struct xlog_recover *trans,
- struct list_head *buffer_list,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct list_head *buffer_list,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS2);
*/
STATIC int
xlog_recover_commit_trans(
- struct log *log,
+ struct xlog *log,
struct xlog_recover *trans,
int pass)
{
STATIC int
xlog_recover_unmount_trans(
- struct log *log,
- xlog_recover_t *trans)
+ struct xlog *log,
+ struct xlog_recover *trans)
{
/* Do nothing now */
xfs_warn(log->l_mp, "%s: Unmount LR", __func__);
#include "xfs_sync.h"
-struct log;
+struct xlog;
struct xfs_mount_args;
struct xfs_inode;
struct xfs_bmbt_irec;
uint m_readio_blocks; /* min read size blocks */
uint m_writeio_log; /* min write size log bytes */
uint m_writeio_blocks; /* min write size blocks */
- struct log *m_log; /* log specific stuff */
+ struct xlog *m_log; /* log specific stuff */
int m_logbufs; /* number of log buffers */
int m_logbsize; /* size of each log buffer */
uint m_rsumlevels; /* rt summary levels */
* We shouldn't write/force the log if we are in the mount/unmount
* process or on a read only filesystem. The workqueue still needs to be
* active in both cases, however, because it is used for inode reclaim
- * during these times. Use the s_umount semaphore to provide exclusion
- * with unmount.
+ * during these times. Use the MS_ACTIVE flag to avoid doing anything
+ * during mount. Doing work during unmount is avoided by calling
+ * cancel_delayed_work_sync on this work queue before tearing down
+ * the ail and the log in xfs_log_unmount.
*/
- if (down_read_trylock(&mp->m_super->s_umount)) {
- if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
- /* dgc: errors ignored here */
- if (mp->m_super->s_frozen == SB_UNFROZEN &&
- xfs_log_need_covered(mp))
- error = xfs_fs_log_dummy(mp);
- else
- xfs_log_force(mp, 0);
-
- /* start pushing all the metadata that is currently
- * dirty */
- xfs_ail_push_all(mp->m_ail);
- }
- up_read(&mp->m_super->s_umount);
+ if (!(mp->m_super->s_flags & MS_ACTIVE) &&
+ !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+ /* dgc: errors ignored here */
+ if (mp->m_super->s_frozen == SB_UNFROZEN &&
+ xfs_log_need_covered(mp))
+ error = xfs_fs_log_dummy(mp);
+ else
+ xfs_log_force(mp, 0);
+
+ /* start pushing all the metadata that is currently
+ * dirty */
+ xfs_ail_push_all(mp->m_ail);
}
/* queue us up again */
struct xfs_dquot;
struct xfs_log_item;
struct xlog_ticket;
-struct log;
+struct xlog;
struct xlog_recover;
struct xlog_recover_item;
struct xfs_buf_log_format;
DEFINE_DQUOT_EVENT(xfs_dqflush_done);
DECLARE_EVENT_CLASS(xfs_loggrant_class,
- TP_PROTO(struct log *log, struct xlog_ticket *tic),
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic),
TP_ARGS(log, tic),
TP_STRUCT__entry(
__field(dev_t, dev)
#define DEFINE_LOGGRANT_EVENT(name) \
DEFINE_EVENT(xfs_loggrant_class, name, \
- TP_PROTO(struct log *log, struct xlog_ticket *tic), \
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic), \
TP_ARGS(log, tic))
DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
DEFINE_SWAPEXT_EVENT(xfs_swap_extent_after);
DECLARE_EVENT_CLASS(xfs_log_recover_item_class,
- TP_PROTO(struct log *log, struct xlog_recover *trans,
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans,
struct xlog_recover_item *item, int pass),
TP_ARGS(log, trans, item, pass),
TP_STRUCT__entry(
#define DEFINE_LOG_RECOVER_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_item_class, name, \
- TP_PROTO(struct log *log, struct xlog_recover *trans, \
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans, \
struct xlog_recover_item *item, int pass), \
TP_ARGS(log, trans, item, pass))
DEFINE_LOG_RECOVER_ITEM(xfs_log_recover_item_recover);
DECLARE_EVENT_CLASS(xfs_log_recover_buf_item_class,
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f),
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f),
TP_ARGS(log, buf_f),
TP_STRUCT__entry(
__field(dev_t, dev)
#define DEFINE_LOG_RECOVER_BUF_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_buf_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f), \
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f), \
TP_ARGS(log, buf_f))
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_not_cancel);
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_dquot_buf);
DECLARE_EVENT_CLASS(xfs_log_recover_ino_item_class,
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f),
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f),
TP_ARGS(log, in_f),
TP_STRUCT__entry(
__field(dev_t, dev)
)
#define DEFINE_LOG_RECOVER_INO_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_ino_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f), \
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f), \
TP_ARGS(log, in_f))
DEFINE_LOG_RECOVER_INO_ITEM(xfs_log_recover_inode_recover);
#define _ASM_GENERIC_BUG_H
#include <linux/compiler.h>
+
+#ifdef CONFIG_GENERIC_BUG
+#define BUGFLAG_WARNING (1 << 0)
+#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
+#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
+#endif
+
+#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#ifdef CONFIG_BUG
#ifdef CONFIG_GENERIC_BUG
-#ifndef __ASSEMBLY__
struct bug_entry {
#ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
unsigned long bug_addr;
#endif
unsigned short flags;
};
-#endif /* __ASSEMBLY__ */
-
-#define BUGFLAG_WARNING (1 << 0)
-#define BUGFLAG_TAINT(taint) (BUGFLAG_WARNING | ((taint) << 8))
-#define BUG_GET_TAINT(bug) ((bug)->flags >> 8)
-
#endif /* CONFIG_GENERIC_BUG */
/*
* to provide better diagnostics.
*/
#ifndef __WARN_TAINT
-#ifndef __ASSEMBLY__
extern __printf(3, 4)
void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...);
const char *fmt, ...);
extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
-#endif
#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#define __WARN_printf_taint(taint, arg...) \
# define WARN_ON_SMP(x) ({0;})
#endif
+#endif /* __ASSEMBLY__ */
+
#endif
/*
* The barrier will stabilize the pmdval in a register or on
* the stack so that it will stop changing under the code.
+ *
+ * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE,
+ * pmd_read_atomic is allowed to return a not atomic pmdval
+ * (for example pointing to an hugepage that has never been
+ * mapped in the pmd). The below checks will only care about
+ * the low part of the pmd with 32bit PAE x86 anyway, with the
+ * exception of pmd_none(). So the important thing is that if
+ * the low part of the pmd is found null, the high part will
+ * be also null or the pmd_none() check below would be
+ * confused.
*/
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
barrier();
-/*
- This file is auto-generated from the drm_pciids.txt in the DRM CVS
- Please contact dri-devel@lists.sf.net to add new cards to this list
-*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
*/
#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
!defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-# define inline inline __attribute__((always_inline))
-# define __inline__ __inline__ __attribute__((always_inline))
-# define __inline __inline __attribute__((always_inline))
+# define inline inline __attribute__((always_inline)) notrace
+# define __inline__ __inline__ __attribute__((always_inline)) notrace
+# define __inline __inline __attribute__((always_inline)) notrace
#else
/* A lot of inline functions can cause havoc with function tracing */
# define inline inline notrace
* is passed to the kernel.
*/
enum kmsg_dump_reason {
+ KMSG_DUMP_UNDEF,
KMSG_DUMP_PANIC,
KMSG_DUMP_OOPS,
KMSG_DUMP_EMERG,
/**
* struct kmsg_dumper - kernel crash message dumper structure
- * @dump: The callback which gets called on crashes. The buffer is passed
- * as two sections, where s1 (length l1) contains the older
- * messages and s2 (length l2) contains the newer.
* @list: Entry in the dumper list (private)
+ * @dump: Call into dumping code which will retrieve the data with
+ * through the record iterator
+ * @max_reason: filter for highest reason number that should be dumped
* @registered: Flag that specifies if this is already registered
*/
struct kmsg_dumper {
- void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2);
struct list_head list;
- int registered;
+ void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason);
+ enum kmsg_dump_reason max_reason;
+ bool active;
+ bool registered;
+
+ /* private state of the kmsg iterator */
+ u32 cur_idx;
+ u32 next_idx;
+ u64 cur_seq;
+ u64 next_seq;
};
#ifdef CONFIG_PRINTK
void kmsg_dump(enum kmsg_dump_reason reason);
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len);
+
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len);
+
+void kmsg_dump_rewind(struct kmsg_dumper *dumper);
+
int kmsg_dump_register(struct kmsg_dumper *dumper);
int kmsg_dump_unregister(struct kmsg_dumper *dumper);
{
}
+static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ const char *line, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+}
+
static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
{
return -EINVAL;
};
union {
+#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
+ defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
/* Used for cmpxchg_double in slub */
unsigned long counters;
+#else
+ /*
+ * Keep _count separate from slub cmpxchg_double data.
+ * As the rest of the double word is protected by
+ * slab_lock but _count is not.
+ */
+ unsigned counters;
+#endif
struct {
* SDHCI declarations specific to ST SPEAr platform
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#define SDIO_CCCR_IF 0x07 /* bus interface controls */
+#define SDIO_BUS_WIDTH_MASK 0x03 /* data bus width setting */
#define SDIO_BUS_WIDTH_1BIT 0x00
+#define SDIO_BUS_WIDTH_RESERVED 0x01
#define SDIO_BUS_WIDTH_4BIT 0x02
#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */
#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */
*/
struct nfs_client {
atomic_t cl_count;
+ atomic_t cl_mds_count;
int cl_cons_state; /* current construction state (-ve: init error) */
#define NFS_CS_READY 0 /* ready to be used */
#define NFS_CS_INITING 1 /* busy initialising */
const struct qstr * name;
const struct nfs_server *server; /* Needed for ID mapping */
const u32 * bitmask;
+ const u32 * open_bitmap;
__u32 claim;
struct nfs4_sequence_args seq_args;
};
struct list_head rpc_list;
atomic_t refcnt;
struct nfs_page *req;
+ struct nfs_writeverf *verf;
struct pnfs_layout_segment *lseg;
loff_t io_start;
const struct rpc_call_ops *mds_ops;
struct nfs_write_header {
struct nfs_pgio_header header;
struct nfs_write_data rpc_data;
+ struct nfs_writeverf verf;
};
struct nfs_mds_commit_info {
* Arasan Compact Flash host controller platform data header file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
/* Provide indication device is assigned by a Virtual Machine Manager */
PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
+ /* Device causes system crash if in D3 during S3 sleep */
+ PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
};
enum pci_irq_reroute_variant {
size_t size,
bool ecc);
void persistent_ram_free(struct persistent_ram_zone *prz);
+void persistent_ram_zap(struct persistent_ram_zone *prz);
struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
bool ecc);
int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
unsigned int count);
+void persistent_ram_save_old(struct persistent_ram_zone *prz);
size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
void *persistent_ram_old(struct persistent_ram_zone *prz);
void persistent_ram_free_old(struct persistent_ram_zone *prz);
PXA25x_SSP, /* pxa 210, 250, 255, 26x */
PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
PXA27x_SSP,
+ PXA3xx_SSP,
PXA168_SSP,
+ PXA910_SSP,
CE4100_SSP,
};
#ifdef CONFIG_TINY_RCU
-static inline int rcu_needs_cpu(int cpu)
+static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
+ *delta_jiffies = ULONG_MAX;
return 0;
}
int rcu_preempt_needs_cpu(void);
-static inline int rcu_needs_cpu(int cpu)
+static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
+ *delta_jiffies = ULONG_MAX;
return rcu_preempt_needs_cpu();
}
extern void rcu_init(void);
extern void rcu_note_context_switch(int cpu);
-extern int rcu_needs_cpu(int cpu);
+extern int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies);
extern void rcu_cpu_stall_reset(void);
/*
void (*cs_control)(u32 command);
};
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#include <linux/clk.h>
#include <mach/dma.h>
* get good packing density in that tree, so the index should be dense in
* the low-order bits.
*
- * We arrange the `type' and `offset' fields so that `type' is at the five
+ * We arrange the `type' and `offset' fields so that `type' is at the seven
* high-order bits of the swp_entry_t and `offset' is right-aligned in the
- * remaining bits.
+ * remaining bits. Although `type' itself needs only five bits, we allow for
+ * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
*
* swp_entry_t's are *never* stored anywhere in their arch-dependent format.
*/
-#define SWP_TYPE_SHIFT(e) (sizeof(e.val) * 8 - MAX_SWAPFILES_SHIFT)
+#define SWP_TYPE_SHIFT(e) ((sizeof(e.val) * 8) - \
+ (MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
#define SWP_OFFSET_MASK(e) ((1UL << SWP_TYPE_SHIFT(e)) - 1)
/*
unsigned wireless:1; /* Wireless USB HCD */
unsigned authorized_default:1;
unsigned has_tt:1; /* Integrated TT in root hub */
- unsigned broken_pci_sleep:1; /* Don't put the
- controller in PCI-D3 for system sleep */
unsigned int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
* vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
*/
+#ifndef _LINUX_VGA_SWITCHEROO_H_
+#define _LINUX_VGA_SWITCHEROO_H_
+
#include <linux/fb.h>
+struct pci_dev;
+
enum vga_switcheroo_state {
VGA_SWITCHEROO_OFF,
VGA_SWITCHEROO_ON,
#endif
+#endif /* _LINUX_VGA_SWITCHEROO_H_ */
/* Experimental, these three ioctls may change over the next couple of kernel
versions. */
-#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 96, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 97, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 98, struct v4l2_dv_timings_cap)
+#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap)
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */
SD_LAST_BUGGY_SECTORS */
unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+ unsigned try_rc_10_first:1; /* Try READ_CAPACACITY_10 first */
unsigned is_visible:1; /* is the device visible in sysfs */
DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
struct snd_tea575x {
struct v4l2_device *v4l2_dev;
+ struct v4l2_file_operations fops;
struct video_device vd; /* video device */
int radio_nr; /* radio_nr */
bool tea5759; /* 5759 chip is present */
int (*ext_init)(struct snd_tea575x *tea);
};
-int snd_tea575x_init(struct snd_tea575x *tea);
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner);
void snd_tea575x_exit(struct snd_tea575x *tea);
#endif /* __SOUND_TEA575X_TUNER_H */
*/
int (*check_stop_free)(struct se_cmd *);
void (*release_cmd)(struct se_cmd *);
+ void (*put_session)(struct se_session *);
/*
* Called with spin_lock_bh(struct se_portal_group->session_lock held.
*/
* "In holdoff": Nothing to do, holding off after unsuccessful attempt.
* "Begin holdoff": Attempt failed, don't retry until next jiffy.
* "Dyntick with callbacks": Entering dyntick-idle despite callbacks.
+ * "Dyntick with lazy callbacks": Entering dyntick-idle w/lazy callbacks.
* "More callbacks": Still more callbacks, try again to clear them out.
* "Callbacks drained": All callbacks processed, off to dyntick idle!
* "Timer": Timer fired to cause CPU to continue processing callbacks.
EXPORT_SYMBOL_GPL(cgroup_lock_is_held);
+static int css_unbias_refcnt(int refcnt)
+{
+ return refcnt >= 0 ? refcnt : refcnt - CSS_DEACT_BIAS;
+}
+
/* the current nr of refs, always >= 0 whether @css is deactivated or not */
static int css_refcnt(struct cgroup_subsys_state *css)
{
int v = atomic_read(&css->refcnt);
- return v >= 0 ? v : v - CSS_DEACT_BIAS;
+ return css_unbias_refcnt(v);
}
/* convenient tests for these bits */
void __css_put(struct cgroup_subsys_state *css)
{
struct cgroup *cgrp = css->cgroup;
+ int v;
rcu_read_lock();
- atomic_dec(&css->refcnt);
- switch (css_refcnt(css)) {
+ v = css_unbias_refcnt(atomic_dec_return(&css->refcnt));
+
+ switch (v) {
case 1:
if (notify_on_release(cgrp)) {
set_bit(CGRP_RELEASABLE, &cgrp->flags);
return !event->cgrp || event->cgrp == cpuctx->cgrp;
}
-static inline void perf_get_cgroup(struct perf_event *event)
+static inline bool perf_tryget_cgroup(struct perf_event *event)
{
- css_get(&event->cgrp->css);
+ return css_tryget(&event->cgrp->css);
}
static inline void perf_put_cgroup(struct perf_event *event)
event->cgrp = cgrp;
/* must be done before we fput() the file */
- perf_get_cgroup(event);
+ if (!perf_tryget_cgroup(event)) {
+ event->cgrp = NULL;
+ ret = -ENOENT;
+ goto out;
+ }
/*
* all events in a group must monitor
list_del_rcu(&p->tasks);
list_del_init(&p->sibling);
__this_cpu_dec(process_counts);
+ /*
+ * If we are the last child process in a pid namespace to be
+ * reaped, notify the reaper sleeping zap_pid_ns_processes().
+ */
+ if (IS_ENABLED(CONFIG_PID_NS)) {
+ struct task_struct *parent = p->real_parent;
+
+ if ((task_active_pid_ns(parent)->child_reaper == parent) &&
+ list_empty(&parent->children) &&
+ (parent->flags & PF_EXITING))
+ wake_up_process(parent);
+ }
}
list_del_rcu(&p->thread_group);
}
mm_release(tsk, mm);
if (!mm)
return;
+ sync_mm_rss(mm);
/*
* Serialize with any possible pending coredump.
* We must hold mmap_sem around checking core_state
zap_pid_ns_processes(pid_ns);
write_lock_irq(&tasklist_lock);
- /*
- * We can not clear ->child_reaper or leave it alone.
- * There may by stealth EXIT_DEAD tasks on ->children,
- * forget_original_parent() must move them somewhere.
- */
- pid_ns->child_reaper = init_pid_ns.child_reaper;
} else if (father->signal->has_child_subreaper) {
struct task_struct *reaper;
#define PANIC_TIMER_STEP 100
#define PANIC_BLINK_SPD 18
-int panic_on_oops;
+int panic_on_oops = CONFIG_PANIC_ON_OOPS_VALUE;
static unsigned long tainted_mask;
static int pause_on_oops;
static int pause_on_oops_flag;
*/
crash_kexec(NULL);
- kmsg_dump(KMSG_DUMP_PANIC);
-
/*
* Note smp_send_stop is the usual smp shutdown function, which
* unfortunately means it may not be hardened to work in a panic
*/
smp_send_stop();
+ kmsg_dump(KMSG_DUMP_PANIC);
+
atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
bust_spinlocks(0);
}
read_unlock(&tasklist_lock);
+ /* Firstly reap the EXIT_ZOMBIE children we may have. */
do {
clear_thread_flag(TIF_SIGPENDING);
rc = sys_wait4(-1, NULL, __WALL, NULL);
} while (rc != -ECHILD);
+ /*
+ * sys_wait4() above can't reap the TASK_DEAD children.
+ * Make sure they all go away, see __unhash_process().
+ */
+ for (;;) {
+ bool need_wait = false;
+
+ read_lock(&tasklist_lock);
+ if (!list_empty(¤t->children)) {
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ need_wait = true;
+ }
+ read_unlock(&tasklist_lock);
+
+ if (!need_wait)
+ break;
+ schedule();
+ }
+
if (pid_ns->reboot)
current->signal->group_exit_code = pid_ns->reboot;
#define LOG_LINE_MAX 1024
/* record buffer */
-#if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
#define LOG_ALIGN 4
#else
-#define LOG_ALIGN 8
+#define LOG_ALIGN __alignof__(struct log)
#endif
#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
if (!user)
return -EBADF;
- mutex_lock(&user->lock);
+ ret = mutex_lock_interruptible(&user->lock);
+ if (ret)
+ return ret;
raw_spin_lock(&logbuf_lock);
while (user->seq == log_next_seq) {
if (file->f_flags & O_NONBLOCK) {
syslog_seq++;
raw_spin_unlock_irq(&logbuf_lock);
- if (len > 0 && copy_to_user(buf, text, len))
+ if (len > size)
+ len = -EINVAL;
+ else if (len > 0 && copy_to_user(buf, text, len))
len = -EFAULT;
kfree(text);
/*
* Find first record that fits, including all following records,
* into the user-provided buffer for this dump.
- */
+ */
seq = clear_seq;
idx = clear_idx;
while (seq < log_next_seq) {
idx = log_next(idx);
seq++;
}
+
+ /* move first record forward until length fits into the buffer */
seq = clear_seq;
idx = clear_idx;
while (len > size && seq < log_next_seq) {
seq++;
}
- /* last message in this dump */
+ /* last message fitting into this dump */
next_seq = log_next_seq;
len = 0;
{
bool clear = false;
static int saved_console_loglevel = -1;
+ static DEFINE_MUTEX(syslog_mutex);
int error;
error = check_syslog_permissions(type, from_file);
error = -EFAULT;
goto out;
}
+ error = mutex_lock_interruptible(&syslog_mutex);
+ if (error)
+ goto out;
error = wait_event_interruptible(log_wait,
syslog_seq != log_next_seq);
- if (error)
+ if (error) {
+ mutex_unlock(&syslog_mutex);
goto out;
+ }
error = syslog_print(buf, len);
+ mutex_unlock(&syslog_mutex);
break;
/* Read/clear last kernel messages */
case SYSLOG_ACTION_READ_CLEAR:
* kmsg_dump - dump kernel log to kernel message dumpers.
* @reason: the reason (oops, panic etc) for dumping
*
- * Iterate through each of the dump devices and call the oops/panic
- * callbacks with the log buffer.
+ * Call each of the registered dumper's dump() callback, which can
+ * retrieve the kmsg records with kmsg_dump_get_line() or
+ * kmsg_dump_get_buffer().
*/
void kmsg_dump(enum kmsg_dump_reason reason)
{
- u64 idx;
struct kmsg_dumper *dumper;
- const char *s1, *s2;
- unsigned long l1, l2;
unsigned long flags;
if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
return;
- /* Theoretically, the log could move on after we do this, but
- there's not a lot we can do about that. The new messages
- will overwrite the start of what we dump. */
+ rcu_read_lock();
+ list_for_each_entry_rcu(dumper, &dump_list, list) {
+ if (dumper->max_reason && reason > dumper->max_reason)
+ continue;
+
+ /* initialize iterator with data about the stored records */
+ dumper->active = true;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ /* invoke dumper which will iterate over records */
+ dumper->dump(dumper, reason);
+
+ /* reset iterator */
+ dumper->active = false;
+ }
+ rcu_read_unlock();
+}
+
+/**
+ * kmsg_dump_get_line - retrieve one kmsg log line
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ unsigned long flags;
+ struct log *msg;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
raw_spin_lock_irqsave(&logbuf_lock, flags);
- if (syslog_seq < log_first_seq)
- idx = syslog_idx;
- else
- idx = log_first_idx;
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= log_next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
- if (idx > log_next_idx) {
- s1 = log_buf;
- l1 = log_next_idx;
+ msg = log_from_idx(dumper->cur_idx);
+ l = msg_print_text(msg, syslog,
+ line, size);
- s2 = log_buf + idx;
- l2 = log_buf_len - idx;
- } else {
- s1 = "";
- l1 = 0;
+ dumper->cur_idx = log_next(dumper->cur_idx);
+ dumper->cur_seq++;
+ ret = true;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
+
+/**
+ * kmsg_dump_get_buffer - copy kmsg log lines
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the end of the kmsg buffer and fill the provided buffer
+ * with as many of the the *youngest* kmsg records that fit into it.
+ * If the buffer is large enough, all available kmsg records will be
+ * copied with a single call.
+ *
+ * Consecutive calls will fill the buffer with the next block of
+ * available older records, not including the earlier retrieved ones.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ unsigned long flags;
+ u64 seq;
+ u32 idx;
+ u64 next_seq;
+ u32 next_idx;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= dumper->next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
+
+ /* calculate length of entire buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ }
- s2 = log_buf + idx;
- l2 = log_next_idx - idx;
+ /* move first record forward until length fits into the buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ while (l > size && seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l -= msg_print_text(msg, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ }
+
+ /* last message in next interation */
+ next_seq = seq;
+ next_idx = idx;
+
+ l = 0;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, syslog,
+ buf + l, size - l);
+
+ idx = log_next(idx);
+ seq++;
}
+
+ dumper->next_seq = next_seq;
+ dumper->next_idx = next_idx;
+ ret = true;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
- rcu_read_lock();
- list_for_each_entry_rcu(dumper, &dump_list, list)
- dumper->dump(dumper, reason, s1, l1, s2, l2);
- rcu_read_unlock();
+/**
+ * kmsg_dump_rewind - reset the interator
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ */
+void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
}
+EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
#endif
rdp->qlen_lazy += rsp->qlen_lazy;
rdp->qlen += rsp->qlen;
rdp->n_cbs_adopted += rsp->qlen;
+ if (rsp->qlen_lazy != rsp->qlen)
+ rcu_idle_count_callbacks_posted();
rsp->qlen_lazy = 0;
rsp->qlen = 0;
/* Process level is worth LLONG_MAX/2. */
int dynticks_nmi_nesting; /* Track NMI nesting level. */
atomic_t dynticks; /* Even value for idle, else odd. */
+#ifdef CONFIG_RCU_FAST_NO_HZ
+ int dyntick_drain; /* Prepare-for-idle state variable. */
+ unsigned long dyntick_holdoff;
+ /* No retries for the jiffy of failure. */
+ struct timer_list idle_gp_timer;
+ /* Wake up CPU sleeping with callbacks. */
+ unsigned long idle_gp_timer_expires;
+ /* When to wake up CPU (for repost). */
+ bool idle_first_pass; /* First pass of attempt to go idle? */
+ unsigned long nonlazy_posted;
+ /* # times non-lazy CBs posted to CPU. */
+ unsigned long nonlazy_posted_snap;
+ /* idle-period nonlazy_posted snapshot. */
+#endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */
};
/* RCU's kthread states for tracing. */
* Because we not have RCU_FAST_NO_HZ, just check whether this CPU needs
* any flavor of RCU.
*/
-int rcu_needs_cpu(int cpu)
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
+ *delta_jiffies = ULONG_MAX;
return rcu_cpu_has_callbacks(cpu);
}
#define RCU_IDLE_GP_DELAY 6 /* Roughly one grace period. */
#define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */
-/* Loop counter for rcu_prepare_for_idle(). */
-static DEFINE_PER_CPU(int, rcu_dyntick_drain);
-/* If rcu_dyntick_holdoff==jiffies, don't try to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);
-/* Timer to awaken the CPU if it enters dyntick-idle mode with callbacks. */
-static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer);
-/* Scheduled expiry time for rcu_idle_gp_timer to allow reposting. */
-static DEFINE_PER_CPU(unsigned long, rcu_idle_gp_timer_expires);
-/* Enable special processing on first attempt to enter dyntick-idle mode. */
-static DEFINE_PER_CPU(bool, rcu_idle_first_pass);
-/* Running count of non-lazy callbacks posted, never decremented. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted);
-/* Snapshot of rcu_nonlazy_posted to detect meaningful exits from idle. */
-static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap);
-
-/*
- * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
- * callbacks on this CPU, (2) this CPU has not yet attempted to enter
- * dyntick-idle mode, or (3) this CPU is in the process of attempting to
- * enter dyntick-idle mode. Otherwise, if we have recently tried and failed
- * to enter dyntick-idle mode, we refuse to try to enter it. After all,
- * it is better to incur scheduling-clock interrupts than to spin
- * continuously for the same time duration!
- */
-int rcu_needs_cpu(int cpu)
-{
- /* Flag a new idle sojourn to the idle-entry state machine. */
- per_cpu(rcu_idle_first_pass, cpu) = 1;
- /* If no callbacks, RCU doesn't need the CPU. */
- if (!rcu_cpu_has_callbacks(cpu))
- return 0;
- /* Otherwise, RCU needs the CPU only if it recently tried and failed. */
- return per_cpu(rcu_dyntick_holdoff, cpu) == jiffies;
-}
-
/*
* Does the specified flavor of RCU have non-lazy callbacks pending on
* the specified CPU? Both RCU flavor and CPU are specified by the
rcu_preempt_cpu_has_nonlazy_callbacks(cpu);
}
+/*
+ * Allow the CPU to enter dyntick-idle mode if either: (1) There are no
+ * callbacks on this CPU, (2) this CPU has not yet attempted to enter
+ * dyntick-idle mode, or (3) this CPU is in the process of attempting to
+ * enter dyntick-idle mode. Otherwise, if we have recently tried and failed
+ * to enter dyntick-idle mode, we refuse to try to enter it. After all,
+ * it is better to incur scheduling-clock interrupts than to spin
+ * continuously for the same time duration!
+ *
+ * The delta_jiffies argument is used to store the time when RCU is
+ * going to need the CPU again if it still has callbacks. The reason
+ * for this is that rcu_prepare_for_idle() might need to post a timer,
+ * but if so, it will do so after tick_nohz_stop_sched_tick() has set
+ * the wakeup time for this CPU. This means that RCU's timer can be
+ * delayed until the wakeup time, which defeats the purpose of posting
+ * a timer.
+ */
+int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+{
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ /* Flag a new idle sojourn to the idle-entry state machine. */
+ rdtp->idle_first_pass = 1;
+ /* If no callbacks, RCU doesn't need the CPU. */
+ if (!rcu_cpu_has_callbacks(cpu)) {
+ *delta_jiffies = ULONG_MAX;
+ return 0;
+ }
+ if (rdtp->dyntick_holdoff == jiffies) {
+ /* RCU recently tried and failed, so don't try again. */
+ *delta_jiffies = 1;
+ return 1;
+ }
+ /* Set up for the possibility that RCU will post a timer. */
+ if (rcu_cpu_has_nonlazy_callbacks(cpu))
+ *delta_jiffies = RCU_IDLE_GP_DELAY;
+ else
+ *delta_jiffies = RCU_IDLE_LAZY_GP_DELAY;
+ return 0;
+}
+
/*
* Handler for smp_call_function_single(). The only point of this
* handler is to wake the CPU up, so the handler does only tracing.
*/
static void rcu_prepare_for_idle_init(int cpu)
{
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
- setup_timer(&per_cpu(rcu_idle_gp_timer, cpu),
- rcu_idle_gp_timer_func, cpu);
- per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies - 1;
- per_cpu(rcu_idle_first_pass, cpu) = 1;
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ rdtp->dyntick_holdoff = jiffies - 1;
+ setup_timer(&rdtp->idle_gp_timer, rcu_idle_gp_timer_func, cpu);
+ rdtp->idle_gp_timer_expires = jiffies - 1;
+ rdtp->idle_first_pass = 1;
}
/*
* Clean up for exit from idle. Because we are exiting from idle, there
- * is no longer any point to rcu_idle_gp_timer, so cancel it. This will
+ * is no longer any point to ->idle_gp_timer, so cancel it. This will
* do nothing if this timer is not active, so just cancel it unconditionally.
*/
static void rcu_cleanup_after_idle(int cpu)
{
- del_timer(&per_cpu(rcu_idle_gp_timer, cpu));
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ del_timer(&rdtp->idle_gp_timer);
trace_rcu_prep_idle("Cleanup after idle");
}
* Because it is not legal to invoke rcu_process_callbacks() with irqs
* disabled, we do one pass of force_quiescent_state(), then do a
* invoke_rcu_core() to cause rcu_process_callbacks() to be invoked
- * later. The per-cpu rcu_dyntick_drain variable controls the sequencing.
+ * later. The ->dyntick_drain field controls the sequencing.
*
* The caller must have disabled interrupts.
*/
static void rcu_prepare_for_idle(int cpu)
{
struct timer_list *tp;
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
/*
* If this is an idle re-entry, for example, due to use of
* RCU_NONIDLE() or the new idle-loop tracing API within the idle
* loop, then don't take any state-machine actions, unless the
* momentary exit from idle queued additional non-lazy callbacks.
- * Instead, repost the rcu_idle_gp_timer if this CPU has callbacks
+ * Instead, repost the ->idle_gp_timer if this CPU has callbacks
* pending.
*/
- if (!per_cpu(rcu_idle_first_pass, cpu) &&
- (per_cpu(rcu_nonlazy_posted, cpu) ==
- per_cpu(rcu_nonlazy_posted_snap, cpu))) {
+ if (!rdtp->idle_first_pass &&
+ (rdtp->nonlazy_posted == rdtp->nonlazy_posted_snap)) {
if (rcu_cpu_has_callbacks(cpu)) {
- tp = &per_cpu(rcu_idle_gp_timer, cpu);
- mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
+ tp = &rdtp->idle_gp_timer;
+ mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
}
return;
}
- per_cpu(rcu_idle_first_pass, cpu) = 0;
- per_cpu(rcu_nonlazy_posted_snap, cpu) =
- per_cpu(rcu_nonlazy_posted, cpu) - 1;
+ rdtp->idle_first_pass = 0;
+ rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted - 1;
/*
* If there are no callbacks on this CPU, enter dyntick-idle mode.
* Also reset state to avoid prejudicing later attempts.
*/
if (!rcu_cpu_has_callbacks(cpu)) {
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
- per_cpu(rcu_dyntick_drain, cpu) = 0;
+ rdtp->dyntick_holdoff = jiffies - 1;
+ rdtp->dyntick_drain = 0;
trace_rcu_prep_idle("No callbacks");
return;
}
* If in holdoff mode, just return. We will presumably have
* refrained from disabling the scheduling-clock tick.
*/
- if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies) {
+ if (rdtp->dyntick_holdoff == jiffies) {
trace_rcu_prep_idle("In holdoff");
return;
}
- /* Check and update the rcu_dyntick_drain sequencing. */
- if (per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+ /* Check and update the ->dyntick_drain sequencing. */
+ if (rdtp->dyntick_drain <= 0) {
/* First time through, initialize the counter. */
- per_cpu(rcu_dyntick_drain, cpu) = RCU_IDLE_FLUSHES;
- } else if (per_cpu(rcu_dyntick_drain, cpu) <= RCU_IDLE_OPT_FLUSHES &&
+ rdtp->dyntick_drain = RCU_IDLE_FLUSHES;
+ } else if (rdtp->dyntick_drain <= RCU_IDLE_OPT_FLUSHES &&
!rcu_pending(cpu) &&
!local_softirq_pending()) {
/* Can we go dyntick-idle despite still having callbacks? */
- trace_rcu_prep_idle("Dyntick with callbacks");
- per_cpu(rcu_dyntick_drain, cpu) = 0;
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
- if (rcu_cpu_has_nonlazy_callbacks(cpu))
- per_cpu(rcu_idle_gp_timer_expires, cpu) =
+ rdtp->dyntick_drain = 0;
+ rdtp->dyntick_holdoff = jiffies;
+ if (rcu_cpu_has_nonlazy_callbacks(cpu)) {
+ trace_rcu_prep_idle("Dyntick with callbacks");
+ rdtp->idle_gp_timer_expires =
jiffies + RCU_IDLE_GP_DELAY;
- else
- per_cpu(rcu_idle_gp_timer_expires, cpu) =
+ } else {
+ rdtp->idle_gp_timer_expires =
jiffies + RCU_IDLE_LAZY_GP_DELAY;
- tp = &per_cpu(rcu_idle_gp_timer, cpu);
- mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu));
- per_cpu(rcu_nonlazy_posted_snap, cpu) =
- per_cpu(rcu_nonlazy_posted, cpu);
+ trace_rcu_prep_idle("Dyntick with lazy callbacks");
+ }
+ tp = &rdtp->idle_gp_timer;
+ mod_timer_pinned(tp, rdtp->idle_gp_timer_expires);
+ rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
return; /* Nothing more to do immediately. */
- } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
+ } else if (--(rdtp->dyntick_drain) <= 0) {
/* We have hit the limit, so time to give up. */
- per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
+ rdtp->dyntick_holdoff = jiffies;
trace_rcu_prep_idle("Begin holdoff");
invoke_rcu_core(); /* Force the CPU out of dyntick-idle. */
return;
*/
static void rcu_idle_count_callbacks_posted(void)
{
- __this_cpu_add(rcu_nonlazy_posted, 1);
+ __this_cpu_add(rcu_dynticks.nonlazy_posted, 1);
}
#endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */
static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
{
- struct timer_list *tltp = &per_cpu(rcu_idle_gp_timer, cpu);
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+ struct timer_list *tltp = &rdtp->idle_gp_timer;
sprintf(cp, "drain=%d %c timer=%lu",
- per_cpu(rcu_dyntick_drain, cpu),
- per_cpu(rcu_dyntick_holdoff, cpu) == jiffies ? 'H' : '.',
+ rdtp->dyntick_drain,
+ rdtp->dyntick_holdoff == jiffies ? 'H' : '.',
timer_pending(tltp) ? tltp->expires - jiffies : -1);
}
else
return -EINVAL;
break;
- case PR_GET_TID_ADDRESS:
- error = prctl_get_tid_address(me, (int __user **)arg2);
- break;
default:
return -EINVAL;
}
case PR_SET_MM:
error = prctl_set_mm(arg2, arg3, arg4, arg5);
break;
+ case PR_GET_TID_ADDRESS:
+ error = prctl_get_tid_address(me, (int __user **)arg2);
+ break;
case PR_SET_CHILD_SUBREAPER:
me->signal->is_child_subreaper = !!arg2;
error = 0;
static void tick_nohz_stop_sched_tick(struct tick_sched *ts)
{
unsigned long seq, last_jiffies, next_jiffies, delta_jiffies;
+ unsigned long rcu_delta_jiffies;
ktime_t last_update, expires, now;
struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
u64 time_delta;
time_delta = timekeeping_max_deferment();
} while (read_seqretry(&xtime_lock, seq));
- if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
+ if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) || printk_needs_cpu(cpu) ||
arch_needs_cpu(cpu)) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
/* Get the next timer wheel timer */
next_jiffies = get_next_timer_interrupt(last_jiffies);
delta_jiffies = next_jiffies - last_jiffies;
+ if (rcu_delta_jiffies < delta_jiffies) {
+ next_jiffies = last_jiffies + rcu_delta_jiffies;
+ delta_jiffies = rcu_delta_jiffies;
+ }
}
/*
* Do not stop the tick, if we are only one off
void tracing_off(void)
{
if (global_trace.buffer)
- ring_buffer_record_on(global_trace.buffer);
+ ring_buffer_record_off(global_trace.buffer);
/*
* This flag is only looked at when buffers haven't been
* allocated yet. We don't really care about the race
#ifdef CONFIG_HARDLOCKUP_DETECTOR
+/*
+ * People like the simple clean cpu node info on boot.
+ * Reduce the watchdog noise by only printing messages
+ * that are different from what cpu0 displayed.
+ */
+static unsigned long cpu0_err;
+
static int watchdog_nmi_enable(int cpu)
{
struct perf_event_attr *wd_attr;
/* Try to register using hardware perf events */
event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
+
+ /* save cpu0 error for future comparision */
+ if (cpu == 0 && IS_ERR(event))
+ cpu0_err = PTR_ERR(event);
+
if (!IS_ERR(event)) {
- pr_info("enabled, takes one hw-pmu counter.\n");
+ /* only print for cpu0 or different than cpu0 */
+ if (cpu == 0 || cpu0_err)
+ pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
goto out_save;
}
+ /* skip displaying the same error again */
+ if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
+ return PTR_ERR(event);
/* vary the KERN level based on the returned errno */
if (PTR_ERR(event) == -EOPNOTSUPP)
default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
+config PANIC_ON_OOPS
+ bool "Panic on Oops" if EXPERT
+ default n
+ help
+ Say Y here to enable the kernel to panic when it oopses. This
+ has the same effect as setting oops=panic on the kernel command
+ line.
+
+ This feature is useful to ensure that the kernel does not do
+ anything erroneous after an oops which could result in data
+ corruption or other issues.
+
+ Say N if unsure.
+
+config PANIC_ON_OOPS_VALUE
+ int
+ range 0 1
+ default 0 if !PANIC_ON_OOPS
+ default 1 if PANIC_ON_OOPS
+
config DETECT_HUNG_TASK
bool "Detect Hung Tasks"
depends on DEBUG_KERNEL
bool should_fail(struct fault_attr *attr, ssize_t size)
{
+ /* No need to check any other properties if the probability is 0 */
+ if (attr->probability == 0)
+ return false;
+
if (attr->task_filter && !fail_task(attr, current))
return false;
/* lockup suspected: */
if (print_once) {
print_once = 0;
- spin_dump(lock, "lockup");
+ spin_dump(lock, "lockup suspected");
#ifdef CONFIG_SMP
trigger_all_cpu_backtrace();
#endif
}
}
-static int __init_memblock memblock_double_array(struct memblock_type *type)
+/**
+ * memblock_double_array - double the size of the memblock regions array
+ * @type: memblock type of the regions array being doubled
+ * @new_area_start: starting address of memory range to avoid overlap with
+ * @new_area_size: size of memory range to avoid overlap with
+ *
+ * Double the size of the @type regions array. If memblock is being used to
+ * allocate memory for a new reserved regions array and there is a previously
+ * allocated memory range [@new_area_start,@new_area_start+@new_area_size]
+ * waiting to be reserved, ensure the memory used by the new array does
+ * not overlap.
+ *
+ * RETURNS:
+ * 0 on success, -1 on failure.
+ */
+static int __init_memblock memblock_double_array(struct memblock_type *type,
+ phys_addr_t new_area_start,
+ phys_addr_t new_area_size)
{
struct memblock_region *new_array, *old_array;
phys_addr_t old_size, new_size, addr;
new_array = kmalloc(new_size, GFP_KERNEL);
addr = new_array ? __pa(new_array) : 0;
} else {
- addr = memblock_find_in_range(0, MEMBLOCK_ALLOC_ACCESSIBLE, new_size, sizeof(phys_addr_t));
+ /* only exclude range when trying to double reserved.regions */
+ if (type != &memblock.reserved)
+ new_area_start = new_area_size = 0;
+
+ addr = memblock_find_in_range(new_area_start + new_area_size,
+ memblock.current_limit,
+ new_size, sizeof(phys_addr_t));
+ if (!addr && new_area_size)
+ addr = memblock_find_in_range(0,
+ min(new_area_start, memblock.current_limit),
+ new_size, sizeof(phys_addr_t));
+
new_array = addr ? __va(addr) : 0;
}
if (!addr) {
*/
if (!insert) {
while (type->cnt + nr_new > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, obase, size) < 0)
return -ENOMEM;
insert = true;
goto repeat;
/* we'll create at most two more regions */
while (type->cnt + 2 > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, base, size) < 0)
return -ENOMEM;
for (i = 0; i < type->cnt; i++) {
* __next_free_mem_range - next function for for_each_free_mem_range()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Find the first free area from *@idx which matches @nid, fill the out
* parameters, and update *@idx for the next iteration. The lower 32bit of
* __next_free_mem_range_rev - next function for for_each_free_mem_range_reverse()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Reverse of __next_free_mem_range().
*/
return memblock_search(&memblock.memory, addr) != -1;
}
+/**
+ * memblock_is_region_memory - check if a region is a subset of memory
+ * @base: base of region to check
+ * @size: size of region to check
+ *
+ * Check if the region [@base, @base+@size) is a subset of a memory block.
+ *
+ * RETURNS:
+ * 0 if false, non-zero if true
+ */
int __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size)
{
int idx = memblock_search(&memblock.memory, base);
memblock.memory.regions[idx].size) >= end;
}
+/**
+ * memblock_is_region_reserved - check if a region intersects reserved memory
+ * @base: base of region to check
+ * @size: size of region to check
+ *
+ * Check if the region [@base, @base+@size) intersects a reserved memory block.
+ *
+ * RETURNS:
+ * 0 if false, non-zero if true
+ */
int __init_memblock memblock_is_region_reserved(phys_addr_t base, phys_addr_t size)
{
memblock_cap_size(base, &size);
{
if (root_memcg == memcg)
return true;
- if (!root_memcg->use_hierarchy)
+ if (!root_memcg->use_hierarchy || !memcg)
return false;
return css_is_ancestor(&memcg->css, &root_memcg->css);
}
/**
* mem_cgroup_margin - calculate chargeable space of a memory cgroup
- * @mem: the memory cgroup
+ * @memcg: the memory cgroup
*
* Returns the maximum amount of memory @mem can be charged with, in
* pages.
/**
* test_mem_cgroup_node_reclaimable
- * @mem: the target memcg
+ * @memcg: the target memcg
* @nid: the node ID to be checked.
* @noswap : specify true here if the user wants flle only information.
*
next = pmd_addr_end(addr, end);
if (pmd_trans_huge(*pmd)) {
if (next - addr != HPAGE_PMD_SIZE) {
- VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
+#ifdef CONFIG_DEBUG_VM
+ if (!rwsem_is_locked(&tlb->mm->mmap_sem)) {
+ pr_err("%s: mmap_sem is unlocked! addr=0x%lx end=0x%lx vma->vm_start=0x%lx vma->vm_end=0x%lx\n",
+ __func__, addr, end,
+ vma->vm_start,
+ vma->vm_end);
+ BUG();
+ }
+#endif
split_huge_page_pmd(vma->vm_mm, pmd);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
goto next;
/**
* zap_page_range - remove user pages in a given range
* @vma: vm_area_struct holding the applicable pages
- * @address: starting address of pages to zap
+ * @start: starting address of pages to zap
* @size: number of bytes to zap
* @details: details of nonlinear truncation or shared cache invalidation
*
if (!list_empty(&pagelist)) {
nr_failed = migrate_pages(&pagelist, new_vma_page,
(unsigned long)vma,
- false, true);
+ false, MIGRATE_SYNC);
if (nr_failed)
putback_lru_pages(&pagelist);
}
const nodemask_t *nodemask, unsigned long totalpages)
{
long points;
+ long adj;
if (oom_unkillable_task(p, memcg, nodemask))
return 0;
if (!p)
return 0;
- if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+ adj = p->signal->oom_score_adj;
+ if (adj == OOM_SCORE_ADJ_MIN) {
task_unlock(p);
return 0;
}
* implementation used by LSMs.
*/
if (has_capability_noaudit(p, CAP_SYS_ADMIN))
- points -= 30 * totalpages / 1000;
+ adj -= 30;
- /*
- * /proc/pid/oom_score_adj ranges from -1000 to +1000 such that it may
- * either completely disable oom killing or always prefer a certain
- * task.
- */
- points += p->signal->oom_score_adj * totalpages / 1000;
+ /* Normalize to oom_score_adj units */
+ adj *= totalpages / 1000;
+ points += adj;
/*
* Never return 0 for an eligible task regardless of the root bonus and
/**
* dump_tasks - dump current memory state of all system tasks
- * @mem: current's memory controller, if constrained
+ * @memcg: current's memory controller, if constrained
* @nodemask: nodemask passed to page allocator for mempolicy ooms
*
* Dumps the current memory state of all eligible tasks. Tasks not in the same
/**
* swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry.
- * @end: swap entry to be cmpxchged
+ * @ent: swap entry to be cmpxchged
* @old: old id
* @new: new id
*
/**
* swap_cgroup_record - record mem_cgroup for this swp_entry.
* @ent: swap entry to be recorded into
- * @mem: mem_cgroup to be recorded
+ * @id: mem_cgroup to be recorded
*
* Returns old value at success, 0 at failure.
* (Of course, old value can be 0.)
/**
* walk_page_range - walk a memory map's page tables with a callback
- * @mm: memory map to walk
* @addr: starting address
* @end: ending address
* @walk: set of callbacks to invoke for each level of the tree
* @chunk: chunk to depopulate
* @off: offset to the area to depopulate
* @size: size of the area to depopulate in bytes
- * @flush: whether to flush cache and tlb or not
*
* For each cpu, depopulate and unmap pages [@page_start,@page_end)
* from @chunk. If @flush is true, vcache is flushed before unmapping
/*
* Find out how many pages are allowed for a single swap
- * device. There are three limiting factors: 1) the number
+ * device. There are two limiting factors: 1) the number
* of bits for the swap offset in the swp_entry_t type, and
* 2) the number of bits in the swap pte as defined by the
- * the different architectures, and 3) the number of free bits
- * in an exceptional radix_tree entry. In order to find the
+ * different architectures. In order to find the
* largest possible bit mask, a swap entry with swap type 0
* and swap offset ~0UL is created, encoded to a swap pte,
* decoded to a swp_entry_t again, and finally the swap
* offset is extracted. This will mask all the bits from
* the initial ~0UL mask that can't be encoded in either
* the swp_entry_t or the architecture definition of a
- * swap pte. Then the same is done for a radix_tree entry.
+ * swap pte.
*/
maxpages = swp_offset(pte_to_swp_entry(
- swp_entry_to_pte(swp_entry(0, ~0UL))));
- maxpages = swp_offset(radix_to_swp_entry(
- swp_to_radix_entry(swp_entry(0, maxpages)))) + 1;
-
+ swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
if (maxpages > swap_header->info.last_page) {
maxpages = swap_header->info.last_page + 1;
/* p->max is an unsigned int: don't overflow it */
const char *sptr = va_arg(ap, const char *);
uint16_t len = 0;
if (sptr)
- len = min_t(uint16_t, strlen(sptr),
+ len = min_t(size_t, strlen(sptr),
USHRT_MAX);
errcode = p9pdu_writef(pdu, proto_version,
s = rest_of_page(data);
if (s > count)
s = count;
+ BUG_ON(index > limit);
sg_set_buf(&sg[index++], data, s);
count -= s;
data += s;
- BUG_ON(index > limit);
}
return index-start;
config BT_HIDP
tristate "HIDP protocol support"
- depends on BT && INPUT && HID_SUPPORT
+ depends on BT && INPUT
select HID
help
HIDP (Human Interface Device Protocol) is a transport layer
return -ENOMEM;
dev_net_set(dev, net);
+ dev->rtnl_link_ops = &br_link_ops;
res = register_netdev(dev);
if (res)
return 0;
}
-static struct rtnl_link_ops br_link_ops __read_mostly = {
+struct rtnl_link_ops br_link_ops __read_mostly = {
.kind = "bridge",
.priv_size = sizeof(struct net_bridge),
.setup = br_dev_setup,
#endif
/* br_netlink.c */
+extern struct rtnl_link_ops br_link_ops;
extern int br_netlink_init(void);
extern void br_netlink_fini(void);
extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
cfsk_hold, cfsk_put);
cf_sk->sk.sk_state = CAIF_CONNECTED;
set_tx_flow_on(cf_sk);
+ cf_sk->sk.sk_shutdown = 0;
cf_sk->sk.sk_state_change(&cf_sk->sk);
break;
/* unmount */
ceph_osdc_stop(&client->osdc);
- /*
- * make sure osd connections close out before destroying the
- * auth module, which is needed to free those connections'
- * ceph_authorizers.
- */
- ceph_msgr_flush();
-
ceph_monc_stop(&client->monc);
ceph_debugfs_client_cleanup(client);
m->hdr.seq = cpu_to_le64(++con->out_seq);
m->needs_out_seq = false;
}
+#ifdef CONFIG_BLOCK
+ else
+ m->bio_iter = NULL;
+#endif
dout("prepare_write_message %p seq %lld type %d len %d+%d+%d %d pgs\n",
m, con->out_seq, le16_to_cpu(m->hdr.type),
mutex_unlock(&monc->mutex);
+ /*
+ * flush msgr queue before we destroy ourselves to ensure that:
+ * - any work that references our embedded con is finished.
+ * - any osd_client or other work that may reference an authorizer
+ * finishes before we shut down the auth subsystem.
+ */
+ ceph_msgr_flush();
+
ceph_auth_destroy(monc->auth);
ceph_msg_put(monc->m_auth);
if (req->r_request)
ceph_msg_put(req->r_request);
- if (req->r_reply)
- ceph_msg_put(req->r_reply);
if (req->r_con_filling_msg) {
dout("release_request revoking pages %p from con %p\n",
req->r_pages, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg,
req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
}
+ if (req->r_reply)
+ ceph_msg_put(req->r_reply);
if (req->r_own_pages)
ceph_release_page_vector(req->r_pages,
req->r_num_pages);
if (req->r_con_filling_msg == con && req->r_reply == msg) {
dout(" dropping con_filling_msg ref %p\n", con);
req->r_con_filling_msg = NULL;
- ceph_con_put(con);
+ con->ops->put(con);
}
if (!req->r_got_reply) {
dout("get_reply revoking msg %p from old con %p\n",
req->r_reply, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg, req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
req->r_con_filling_msg = NULL;
}
#endif
}
*skip = 0;
- req->r_con_filling_msg = ceph_con_get(con);
+ req->r_con_filling_msg = con->ops->get(con);
dout("get_reply tid %lld %p\n", tid, m);
out:
no_module = request_module("netdev-%s", name);
if (no_module && capable(CAP_SYS_MODULE)) {
if (!request_module("%s", name))
- pr_err("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
- name);
+ pr_warn("Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s instead.\n",
+ name);
}
}
EXPORT_SYMBOL(dev_load);
if (w->leaf && fn->fn_flags & RTN_RTINFO) {
int err;
- if (w->count < w->skip) {
- w->count++;
+ if (w->skip) {
+ w->skip--;
continue;
}
tcp_rsk(req)->snt_isn = isn;
tcp_rsk(req)->snt_synack = tcp_time_stamp;
- security_inet_conn_request(sk, skb, req);
+ if (security_inet_conn_request(sk, skb, req))
+ goto drop_and_release;
if (tcp_v6_send_synack(sk, req,
(struct request_values *)&tmp_ext,
struct sock *tunnel_sock;
struct l2tp_session *session;
struct list_head list;
+ atomic_long_t tx_bytes;
+ atomic_long_t tx_packets;
+ atomic_long_t rx_bytes;
+ atomic_long_t rx_packets;
+ atomic_long_t rx_errors;
};
/* via l2tp_session_priv() */
struct l2tp_eth *priv = netdev_priv(dev);
struct l2tp_session *session = priv->session;
+ atomic_long_add(skb->len, &priv->tx_bytes);
+ atomic_long_inc(&priv->tx_packets);
+
l2tp_xmit_skb(session, skb, session->hdr_len);
- dev->stats.tx_bytes += skb->len;
- dev->stats.tx_packets++;
+ return NETDEV_TX_OK;
+}
- return 0;
+static struct rtnl_link_stats64 *l2tp_eth_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct l2tp_eth *priv = netdev_priv(dev);
+
+ stats->tx_bytes = atomic_long_read(&priv->tx_bytes);
+ stats->tx_packets = atomic_long_read(&priv->tx_packets);
+ stats->rx_bytes = atomic_long_read(&priv->rx_bytes);
+ stats->rx_packets = atomic_long_read(&priv->rx_packets);
+ stats->rx_errors = atomic_long_read(&priv->rx_errors);
+ return stats;
}
+
static struct net_device_ops l2tp_eth_netdev_ops = {
.ndo_init = l2tp_eth_dev_init,
.ndo_uninit = l2tp_eth_dev_uninit,
.ndo_start_xmit = l2tp_eth_dev_xmit,
+ .ndo_get_stats64 = l2tp_eth_get_stats64,
};
static void l2tp_eth_dev_setup(struct net_device *dev)
{
ether_setup(dev);
- dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->features |= NETIF_F_LLTX;
dev->netdev_ops = &l2tp_eth_netdev_ops;
dev->destructor = free_netdev;
}
{
struct l2tp_eth_sess *spriv = l2tp_session_priv(session);
struct net_device *dev = spriv->dev;
+ struct l2tp_eth *priv = netdev_priv(dev);
if (session->debug & L2TP_MSG_DATA) {
unsigned int length;
- u8 *ptr = skb->data;
length = min(32u, skb->len);
if (!pskb_may_pull(skb, length))
goto error;
pr_debug("%s: eth recv\n", session->name);
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, ptr, length);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length);
}
if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
nf_reset(skb);
if (dev_forward_skb(dev, skb) == NET_RX_SUCCESS) {
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += data_len;
- } else
- dev->stats.rx_errors++;
-
+ atomic_long_inc(&priv->rx_packets);
+ atomic_long_add(data_len, &priv->rx_bytes);
+ } else {
+ atomic_long_inc(&priv->rx_errors);
+ }
return;
error:
- dev->stats.rx_errors++;
+ atomic_long_inc(&priv->rx_errors);
kfree_skb(skb);
}
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
u32 changed = 0;
- u8 bssid[ETH_ALEN];
ASSERT_MGD_MTX(ifmgd);
ieee80211_stop_poll(sdata);
- memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
-
ifmgd->associated = NULL;
- memset(ifmgd->bssid, 0, ETH_ALEN);
/*
* we need to commit the associated = NULL change because the
netif_carrier_off(sdata->dev);
mutex_lock(&local->sta_mtx);
- sta = sta_info_get(sdata, bssid);
+ sta = sta_info_get(sdata, ifmgd->bssid);
if (sta) {
set_sta_flag(sta, WLAN_STA_BLOCK_BA);
ieee80211_sta_tear_down_BA_sessions(sta, tx);
/* deauthenticate/disassociate now */
if (tx || frame_buf)
- ieee80211_send_deauth_disassoc(sdata, bssid, stype, reason,
- tx, frame_buf);
+ ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
+ reason, tx, frame_buf);
/* flush out frame */
if (tx)
drv_flush(local, false);
+ /* clear bssid only after building the needed mgmt frames */
+ memset(ifmgd->bssid, 0, ETH_ALEN);
+
/* remove AP and TDLS peers */
sta_info_flush(local, sdata);
* frames that we didn't handle, including returning unknown
* ones. For all other modes we will return them to the sender,
* setting the 0x80 bit in the action category, as required by
- * 802.11-2007 7.3.1.11.
+ * 802.11-2012 9.24.4.
* Newer versions of hostapd shall also use the management frame
* registration mechanisms, but older ones still use cooked
* monitor interfaces so push all frames there.
sdata->vif.type == NL80211_IFTYPE_AP_VLAN))
return RX_DROP_MONITOR;
+ if (is_multicast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
/* do not return rejected action frames */
if (mgmt->u.action.category & 0x80)
return RX_DROP_UNUSABLE;
{
struct xmit_work *work;
- if (!(priv->phy->channels_supported[page] & (1 << chan)))
+ if (!(priv->phy->channels_supported[page] & (1 << chan))) {
WARN_ON(1);
return NETDEV_TX_OK;
+ }
if (!(priv->hw.flags & IEEE802154_HW_OMIT_CKSUM)) {
u16 crc = crc_ccitt(0, skb->data, skb->len);
nfca_poll->sens_res = __le16_to_cpu(*((__u16 *)data));
data += 2;
- nfca_poll->nfcid1_len = *data++;
+ nfca_poll->nfcid1_len = min_t(__u8, *data++, NFC_NFCID1_MAXSIZE);
pr_debug("sens_res 0x%x, nfcid1_len %d\n",
nfca_poll->sens_res, nfca_poll->nfcid1_len);
struct rf_tech_specific_params_nfcb_poll *nfcb_poll,
__u8 *data)
{
- nfcb_poll->sensb_res_len = *data++;
+ nfcb_poll->sensb_res_len = min_t(__u8, *data++, NFC_SENSB_RES_MAXSIZE);
pr_debug("sensb_res_len %d\n", nfcb_poll->sensb_res_len);
__u8 *data)
{
nfcf_poll->bit_rate = *data++;
- nfcf_poll->sensf_res_len = *data++;
+ nfcf_poll->sensf_res_len = min_t(__u8, *data++, NFC_SENSF_RES_MAXSIZE);
pr_debug("bit_rate %d, sensf_res_len %d\n",
nfcf_poll->bit_rate, nfcf_poll->sensf_res_len);
switch (ntf->activation_rf_tech_and_mode) {
case NCI_NFC_A_PASSIVE_POLL_MODE:
nfca_poll = &ntf->activation_params.nfca_poll_iso_dep;
- nfca_poll->rats_res_len = *data++;
+ nfca_poll->rats_res_len = min_t(__u8, *data++, 20);
pr_debug("rats_res_len %d\n", nfca_poll->rats_res_len);
if (nfca_poll->rats_res_len > 0) {
memcpy(nfca_poll->rats_res,
case NCI_NFC_B_PASSIVE_POLL_MODE:
nfcb_poll = &ntf->activation_params.nfcb_poll_iso_dep;
- nfcb_poll->attrib_res_len = *data++;
+ nfcb_poll->attrib_res_len = min_t(__u8, *data++, 50);
pr_debug("attrib_res_len %d\n", nfcb_poll->attrib_res_len);
if (nfcb_poll->attrib_res_len > 0) {
memcpy(nfcb_poll->attrib_res,
{
struct sock *sk = sock->sk;
- pr_debug("sock=%p\n", sock);
+ pr_debug("sock=%p sk=%p\n", sock, sk);
+
+ if (!sk)
+ return 0;
sock_orphan(sk);
sock_put(sk);
msg->errno = err;
destroy_msg(msg);
} while (!list_empty(head));
- wake_up(waitq);
+
+ if (waitq)
+ wake_up(waitq);
}
static void
}
dentry = dget(pipe->dentry);
spin_unlock(&pipe->lock);
- if (dentry) {
- rpc_purge_list(&RPC_I(dentry->d_inode)->waitq,
- &free_list, destroy_msg, -ETIMEDOUT);
- dput(dentry);
- }
+ rpc_purge_list(dentry ? &RPC_I(dentry->d_inode)->waitq : NULL,
+ &free_list, destroy_msg, -ETIMEDOUT);
+ dput(dentry);
}
ssize_t rpc_pipe_generic_upcall(struct file *filp, struct rpc_pipe_msg *msg,
sizeof(req->rq_snd_buf));
return bc_send(req);
} else {
- /* Nothing to do to drop request */
+ /* drop request */
+ xprt_free_bc_request(req);
return 0;
}
}
push(@signature_tags, "Reviewed-by:");
push(@signature_tags, "Acked-by:");
+my $signature_pattern = "\(" . join("|", @signature_tags) . "\)";
+
# rfc822 email address - preloaded methods go here.
my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])";
my $rfc822_char = '[\\000-\\377]';
my @status = ();
my %deduplicate_name_hash = ();
my %deduplicate_address_hash = ();
-my $signature_pattern;
my @maintainers = get_maintainers();
MODULE_DESCRIPTION("Routines for control of TEA5757/5759 Philips AM/FM radio tuner chips");
MODULE_LICENSE("GPL");
-#define FREQ_LO (76U * 16000)
-#define FREQ_HI (108U * 16000)
+#define FREQ_LO ((tea->tea5759 ? 760 : 875) * 1600U)
+#define FREQ_HI ((tea->tea5759 ? 910 : 1080) * 1600U)
/*
* definitions
return data;
}
-static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+static u32 snd_tea575x_val_to_freq(struct snd_tea575x *tea, u32 val)
{
- u32 freq = snd_tea575x_read(tea) & TEA575X_BIT_FREQ_MASK;
+ u32 freq = val & TEA575X_BIT_FREQ_MASK;
if (freq == 0)
return freq;
return clamp(freq * 16, FREQ_LO, FREQ_HI); /* from kHz */
}
+static u32 snd_tea575x_get_freq(struct snd_tea575x *tea)
+{
+ return snd_tea575x_val_to_freq(tea, snd_tea575x_read(tea));
+}
+
static void snd_tea575x_set_freq(struct snd_tea575x *tea)
{
u32 freq = tea->freq;
tea->val &= ~TEA575X_BIT_FREQ_MASK;
tea->val |= freq & TEA575X_BIT_FREQ_MASK;
snd_tea575x_write(tea, tea->val);
+ tea->freq = snd_tea575x_val_to_freq(tea, tea->val);
}
/*
}
static const struct v4l2_file_operations tea575x_fops = {
- .owner = THIS_MODULE,
.unlocked_ioctl = video_ioctl2,
.open = v4l2_fh_open,
.release = v4l2_fh_release,
};
static const struct video_device tea575x_radio = {
- .fops = &tea575x_fops,
.ioctl_ops = &tea575x_ioctl_ops,
.release = video_device_release_empty,
};
/*
* initialize all the tea575x chips
*/
-int snd_tea575x_init(struct snd_tea575x *tea)
+int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner)
{
int retval;
tea->vd.lock = &tea->mutex;
tea->vd.v4l2_dev = tea->v4l2_dev;
tea->vd.ctrl_handler = &tea->ctrl_handler;
+ tea->fops = tea575x_fops;
+ tea->fops.owner = owner;
+ tea->vd.fops = &tea->fops;
set_bit(V4L2_FL_USE_FH_PRIO, &tea->vd.flags);
/* disable hw_freq_seek if we can't use it */
if (tea->cannot_read_data)
chip->tea.ops = &snd_es1968_tea_ops;
strlcpy(chip->tea.card, "SF64-PCE2", sizeof(chip->tea.card));
sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
- if (!snd_tea575x_init(&chip->tea))
+ if (!snd_tea575x_init(&chip->tea, THIS_MODULE))
printk(KERN_INFO "es1968: detected TEA575x radio\n");
#endif
sprintf(chip->tea.bus_info, "PCI:%s", pci_name(pci));
if ((tea575x_tuner & TUNER_TYPE_MASK) > 0 &&
(tea575x_tuner & TUNER_TYPE_MASK) < 4) {
- if (snd_tea575x_init(&chip->tea)) {
+ if (snd_tea575x_init(&chip->tea, THIS_MODULE)) {
snd_printk(KERN_ERR "TEA575x radio not found\n");
snd_fm801_free(chip);
return -ENODEV;
/* autodetect tuner connection */
for (tea575x_tuner = 1; tea575x_tuner <= 3; tea575x_tuner++) {
chip->tea575x_tuner = tea575x_tuner;
- if (!snd_tea575x_init(&chip->tea)) {
+ if (!snd_tea575x_init(&chip->tea, THIS_MODULE)) {
snd_printk(KERN_INFO "detected TEA575x radio type %s\n",
get_tea575x_gpio(chip)->name);
break;
snd-hda-codec-realtek.
This module is automatically loaded at probing.
-config SND_HDA_ENABLE_REALTEK_QUIRKS
- bool "Build static quirks for Realtek codecs"
- depends on SND_HDA_CODEC_REALTEK
- default y
- help
- Say Y here to build the static quirks codes for Realtek codecs.
- If you need the "model" preset that the default BIOS auto-parser
- can't handle, turn this option on.
-
- If your device works with model=auto option, basically you don't
- need the quirk code. By turning this off, you can reduce the
- module size quite a lot.
-
config SND_HDA_CODEC_ANALOG
bool "Build Analog Device HD-audio codec support"
default y
const struct hda_verb *list)
{
const struct hda_verb **v;
- snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
v = snd_array_new(&spec->verbs);
if (!v)
return -ENOMEM;
const struct snd_pci_quirk *quirk,
const struct hda_fixup *fixlist);
+static inline void snd_hda_gen_init(struct hda_gen_spec *spec)
+{
+ snd_array_init(&spec->verbs, sizeof(struct hda_verb *), 8);
+}
+
+static inline void snd_hda_gen_free(struct hda_gen_spec *spec)
+{
+ snd_array_free(&spec->verbs);
+}
+
#endif /* __SOUND_HDA_AUTO_PARSER_H */
{
if (!codec)
return;
+ snd_hda_jack_tbl_clear(codec);
restore_init_pincfgs(codec);
#ifdef CONFIG_SND_HDA_POWER_SAVE
cancel_delayed_work(&codec->power_work);
list_del(&codec->list);
snd_array_free(&codec->mixers);
snd_array_free(&codec->nids);
+ snd_array_free(&codec->cvt_setups);
snd_array_free(&codec->conn_lists);
snd_array_free(&codec->spdif_out);
codec->bus->caddr_tbl[codec->addr] = NULL;
/* free only driver_pins so that init_pins + user_pins are restored */
snd_array_free(&codec->driver_pins);
restore_pincfgs(codec);
+ snd_array_free(&codec->cvt_setups);
+ snd_array_free(&codec->spdif_out);
codec->num_pcms = 0;
codec->pcm_info = NULL;
codec->preset = NULL;
codec->power_jiffies += delta;
}
-/**
- * snd_hda_power_up - Power-up the codec
- * @codec: HD-audio codec
- *
- * Increment the power-up counter and power up the hardware really when
- * not turned on yet.
- */
-void snd_hda_power_up(struct hda_codec *codec)
+/* Transition to powered up, if wait_power_down then wait for a pending
+ * transition to D3 to complete. A pending D3 transition is indicated
+ * with power_transition == -1. */
+static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down)
{
struct hda_bus *bus = codec->bus;
spin_lock(&codec->power_lock);
codec->power_count++;
- if (codec->power_on || codec->power_transition > 0) {
+ /* Return if power_on or transitioning to power_on, unless currently
+ * powering down. */
+ if ((codec->power_on || codec->power_transition > 0) &&
+ !(wait_power_down && codec->power_transition < 0)) {
spin_unlock(&codec->power_lock);
return;
}
codec->power_transition = 0;
spin_unlock(&codec->power_lock);
}
+
+/**
+ * snd_hda_power_up - Power-up the codec
+ * @codec: HD-audio codec
+ *
+ * Increment the power-up counter and power up the hardware really when
+ * not turned on yet.
+ */
+void snd_hda_power_up(struct hda_codec *codec)
+{
+ __snd_hda_power_up(codec, false);
+}
EXPORT_SYMBOL_HDA(snd_hda_power_up);
+/**
+ * snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending
+ * D3 transition to complete. This differs from snd_hda_power_up() when
+ * power_transition == -1. snd_hda_power_up sees this case as a nop,
+ * snd_hda_power_up_d3wait waits for the D3 transition to complete then powers
+ * back up.
+ * @codec: HD-audio codec
+ *
+ * Cancel any power down operation hapenning on the work queue, then power up.
+ */
+void snd_hda_power_up_d3wait(struct hda_codec *codec)
+{
+ /* This will cancel and wait for pending power_work to complete. */
+ __snd_hda_power_up(codec, true);
+}
+EXPORT_SYMBOL_HDA(snd_hda_power_up_d3wait);
+
#define power_save(codec) \
((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
*/
#ifdef CONFIG_SND_HDA_POWER_SAVE
void snd_hda_power_up(struct hda_codec *codec);
+void snd_hda_power_up_d3wait(struct hda_codec *codec);
void snd_hda_power_down(struct hda_codec *codec);
void snd_hda_update_power_acct(struct hda_codec *codec);
#else
static inline void snd_hda_power_up(struct hda_codec *codec) {}
+static inline void snd_hda_power_up_d3wait(struct hda_codec *codec) {}
static inline void snd_hda_power_down(struct hda_codec *codec) {}
#endif
buff_step);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
buff_step);
- snd_hda_power_up(apcm->codec);
+ snd_hda_power_up_d3wait(apcm->codec);
err = hinfo->ops.open(hinfo, apcm->codec, substream);
if (err < 0) {
azx_release_device(azx_dev);
static void conexant_free(struct hda_codec *codec)
{
+ struct conexant_spec *spec = codec->spec;
+ snd_hda_gen_free(&spec->gen);
snd_hda_detach_beep_device(codec);
- kfree(codec->spec);
+ kfree(spec);
}
static const struct snd_kcontrol_new cxt_capture_mixers[] = {
SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
+ SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
{}
};
if (!spec)
return -ENOMEM;
codec->spec = spec;
+ snd_hda_gen_init(&spec->gen);
switch (codec->vendor_id) {
case 0x14f15045:
alc_shutup(codec);
alc_free_kctls(codec);
alc_free_bind_ctls(codec);
+ snd_hda_gen_free(&spec->gen);
kfree(spec);
snd_hda_detach_beep_device(codec);
}
return -ENOMEM;
codec->spec = spec;
spec->mixer_nid = mixer_nid;
+ snd_hda_gen_init(&spec->gen);
err = alc_codec_rename_from_preset(codec);
if (err < 0) {
alc_fix_pll_init(codec, 0x20, 0x04, 15);
+ alc_pick_fixup(codec, alc662_fixup_models,
+ alc662_fixup_tbl, alc662_fixups);
+ alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
+
+ alc_auto_parse_customize_define(codec);
+
if ((alc_get_coef0(codec) & (1 << 14)) &&
codec->bus->pci->subsystem_vendor == 0x1025 &&
spec->cdefine.platform_type == 1) {
goto error;
}
- alc_pick_fixup(codec, alc662_fixup_models,
- alc662_fixup_tbl, alc662_fixups);
- alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
-
- alc_auto_parse_customize_define(codec);
-
/* automatic parse from the BIOS config */
err = alc662_parse_auto_config(codec);
if (err < 0)
{ .id = 0x10ec0272, .name = "ALC272", .patch = patch_alc662 },
{ .id = 0x10ec0275, .name = "ALC275", .patch = patch_alc269 },
{ .id = 0x10ec0276, .name = "ALC276", .patch = patch_alc269 },
+ { .id = 0x10ec0280, .name = "ALC280", .patch = patch_alc269 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
AC_PINCTL_IN_EN);
for (i = 0; i < spec->num_pwrs; i++) {
hda_nid_t nid = spec->pwr_nids[i];
- int pinctl, def_conf;
+ unsigned int pinctl, def_conf;
def_conf = snd_hda_codec_get_pincfg(codec, nid);
def_conf = get_defcfg_connect(def_conf);
stac_toggle_power_map(codec, nid, 0);
continue;
}
+ if (def_conf == AC_JACK_PORT_FIXED) {
+ /* no need for jack detection for fixed pins */
+ stac_toggle_power_map(codec, nid, 1);
+ continue;
+ }
/* power on when no jack detection is available */
/* or when the VREF is used for controlling LED */
if (!spec->hp_detect ||
return ret;
}
+ regcache_cache_only(wm8904->regmap, false);
regcache_sync(wm8904->regmap);
/* Enable bias */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_BIAS_ENA, 0);
-#ifdef CONFIG_REGULATOR
- /* Post 2.6.34 we will be able to get a callback when
- * the regulators are disabled which we can use but
- * for now just assume that the power will be cut if
- * the regulator API is in use.
- */
- codec->cache_sync = 1;
-#endif
+ regcache_cache_only(wm8904->regmap, true);
+ regcache_mark_dirty(wm8904->regmap);
regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
struct wm8904_pdata *pdata = wm8904->pdata;
- u16 *reg_cache = codec->reg_cache;
int ret, i;
- codec->cache_sync = 1;
codec->control_data = wm8904->regmap;
switch (wm8904->devtype) {
goto err_enable;
}
+ regcache_cache_only(wm8904->regmap, true);
/* Change some default settings - latch VU and enable ZC */
snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
WM8904_ADC_VU, WM8904_ADC_VU);
if (!pdata->gpio_cfg[i])
continue;
- reg_cache[WM8904_GPIO_CONTROL_1 + i]
- = pdata->gpio_cfg[i] & 0xffff;
+ regmap_update_bits(wm8904->regmap,
+ WM8904_GPIO_CONTROL_1 + i,
+ 0xffff,
+ pdata->gpio_cfg[i]);
}
/* Zero is the default value for these anyway */
for (i = 0; i < WM8904_MIC_REGS; i++)
- reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
- = pdata->mic_cfg[i];
+ regmap_update_bits(wm8904->regmap,
+ WM8904_MIC_BIAS_CONTROL_0 + i,
+ 0xffff,
+ pdata->mic_cfg[i]);
}
/* Set Class W by default - this will be managed by the Class
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
- if (!wm8994->jackdet || !wm8994->jack_cb)
- return;
-
if (!wm8994->jackdet || !wm8994->jack_cb)
return;
}
}
- regcache_cache_only(codec->control_data, true);
-
/* Apply platform data settings */
snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL,
WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK,
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
- regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
}
dev_info(&i2c->dev, "revision %c\n",
(reg & WM8996_CHIP_REV_MASK) + 'A');
- regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
-
ret = wm8996_reset(wm8996);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to issue reset\n");
goto err_regmap;
}
+ regcache_cache_only(wm8996->regmap, true);
+ regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
+
wm8996_init_gpio(wm8996);
ret = snd_soc_register_codec(&i2c->dev,
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/audio.h>
#include "../../arm/pxa2xx-pcm.h"
#include "pxa-ssp.h"
{
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ if (ssp->type == PXA25x_SSP) {
sscr0 &= ~0x0000ff00;
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
} else {
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
u32 div;
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ if (ssp->type == PXA25x_SSP)
div = ((sscr0 >> 8) & 0xff) * 2 + 2;
else
div = ((sscr0 >> 8) & 0xfff) + 1;
break;
case PXA_SSP_CLK_PLL:
/* Internal PLL is fixed */
- if (cpu_is_pxa25x())
+ if (ssp->type == PXA25x_SSP)
priv->sysclk = 1843200;
else
priv->sysclk = 13000000;
/* The SSP clock must be disabled when changing SSP clock mode
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_disable(ssp->clk);
val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0;
pxa_ssp_write_reg(ssp, SSCR0, val);
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_enable(ssp->clk);
return 0;
case PXA_SSP_AUDIO_DIV_SCDB:
val = pxa_ssp_read_reg(ssp, SSACD);
val &= ~SSACD_SCDB;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val &= ~SSACD_SCDX8;
-#endif
switch (div) {
case PXA_SSP_CLK_SCDB_1:
val |= SSACD_SCDB;
break;
case PXA_SSP_CLK_SCDB_4:
break;
-#if defined(CONFIG_PXA3xx)
case PXA_SSP_CLK_SCDB_8:
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val |= SSACD_SCDX8;
else
return -EINVAL;
break;
-#endif
default:
return -EINVAL;
}
struct ssp_device *ssp = priv->ssp;
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
pxa_ssp_write_reg(ssp, SSACDD, 0);
-#endif
switch (freq_out) {
case 5622000:
break;
default:
-#ifdef CONFIG_PXA3xx
/* PXA3xx has a clock ditherer which can be used to generate
* a wider range of frequencies - calculate a value for it.
*/
- if (cpu_is_pxa3xx()) {
+ if (ssp->type == PXA3xx_SSP) {
u32 val;
u64 tmp = 19968;
tmp *= 1000000;
val, freq_out);
break;
}
-#endif
return -EINVAL;
}
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
-#ifdef CONFIG_PXA3xx
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
sscr0 |= SSCR0_FPCKE;
-#endif
sscr0 |= SSCR0_DataSize(16);
break;
case SNDRV_PCM_FORMAT_S24_LE:
* trying and failing a lot; some of the registers
* needed for that mode are only available on PXA3xx.
*/
-
-#ifdef CONFIG_PXA3xx
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
return -EINVAL;
sspsp |= SSPSP_SFRMWDTH(width * 2);
sspsp |= SSPSP_EDMYSTOP(3);
sspsp |= SSPSP_DMYSTOP(3);
sspsp |= SSPSP_DMYSTRT(1);
-#else
- return -EINVAL;
-#endif
} else {
/* The frame width is the width the LRCLK is
* asserted for; the delay is expressed in
return 0;
}
+static int tegra_wm8903_remove(struct snd_soc_card *card)
+{
+ struct snd_soc_pcm_runtime *rtd = &(card->rtd[0]);
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_codec *codec = codec_dai->codec;
+
+ wm8903_mic_detect(codec, NULL, 0, 0);
+
+ return 0;
+}
+
static struct snd_soc_dai_link tegra_wm8903_dai = {
.name = "WM8903",
.stream_name = "WM8903 PCM",
.dai_link = &tegra_wm8903_dai,
.num_links = 1,
+ .remove = tegra_wm8903_remove,
+
.controls = tegra_wm8903_controls,
.num_controls = ARRAY_SIZE(tegra_wm8903_controls),
.dapm_widgets = tegra_wm8903_dapm_widgets,
int ret;
u8 data;
struct usb_device *device = interface_to_usbdev(intf);
- const struct firmware *fw = 0;
+ const struct firmware *fw = NULL;
struct ihex_record *rec = kmalloc(sizeof(struct ihex_record),
GFP_KERNEL);
.map = audigy2nx_map,
.selector_map = audigy2nx_selectors,
},
+ { /* Logitech, Inc. QuickCam Pro for Notebooks */
+ .id = USB_ID(0x046d, 0x0991),
+ .ignore_ctl_error = 1,
+ },
+ { /* Logitech, Inc. QuickCam E 3500 */
+ .id = USB_ID(0x046d, 0x09a4),
+ .ignore_ctl_error = 1,
+ },
{
/* Hercules DJ Console (Windows Edition) */
.id = USB_ID(0x06f8, 0xb000),
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
get_endpoint(alts, 1)->bSynchAddress != 0 &&
!implicit_fb)) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ get_endpoint(alts, 1)->bmAttributes,
+ get_endpoint(alts, 1)->bLength,
+ get_endpoint(alts, 1)->bSynchAddress);
return -EINVAL;
}
ep = get_endpoint(alts, 1)->bEndpointAddress;
- if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
+ if (!implicit_fb &&
+ get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
(( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
- (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) ||
- ( is_playback && !implicit_fb))) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ is_playback, ep, get_endpoint(alts, 0)->bSynchAddress);
return -EINVAL;
}
return -EINVAL;
}
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream,
+ int cmd)
{
int err;
struct snd_usb_substream *subs = substream->runtime->private_data;
}
}
},
+{
+ USB_DEVICE(0x0582, 0x014d),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "BOSS", */
+ /* .product_name = "GT-100", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_MIDI_FIXED_ENDPOINT,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_cables = 0x0001,
+ .in_cables = 0x0001
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Guillemot devices */
{
pfd.fd = fd;
while (1) {
+ struct sockaddr *addr_p = (struct sockaddr *) &addr;
+ socklen_t addr_l = sizeof(addr);
pfd.events = POLLIN;
pfd.revents = 0;
poll(&pfd, 1, -1);
- len = recv(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0);
+ len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0,
+ addr_p, &addr_l);
- if (len < 0) {
- syslog(LOG_ERR, "recv failed; error:%d", len);
+ if (len < 0 || addr.nl_pid) {
+ syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s",
+ addr.nl_pid, errno, strerror(errno));
close(fd);
return -1;
}
fprintf(stderr, "cannot use both --output and --log-fd\n");
usage_with_options(stat_usage, options);
}
+
+ if (output_fd < 0) {
+ fprintf(stderr, "argument to --log-fd must be a > 0\n");
+ usage_with_options(stat_usage, options);
+ }
+
if (!output) {
struct timespec tm;
mode = append_file ? "a" : "w";
}
clock_gettime(CLOCK_REALTIME, &tm);
fprintf(output, "# started on %s\n", ctime(&tm.tv_sec));
- } else if (output_fd != 2) {
+ } else if (output_fd > 0) {
mode = append_file ? "a" : "w";
output = fdopen(output_fd, mode);
if (!output) {
else
return -1;
} else if (ph->needs_swap) {
- unsigned int i;
/*
* feature bitmap is declared as an array of unsigned longs --
* not good since its size can differ between the host that
* file), punt and fallback to the original behavior --
* clearing all feature bits and setting buildid.
*/
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i)
- header->adds_features[i] = bswap_64(header->adds_features[i]);
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i) {
- header->adds_features[i] = bswap_64(header->adds_features[i]);
- header->adds_features[i] = bswap_32(header->adds_features[i]);
- }
+ /* unswap as u64 */
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
+
+ /* unswap as u32 */
+ mem_bswap_32(&header->adds_features,
+ BITS_TO_U32(HEADER_FEAT_BITS));
}
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
return ret <= 0 ? -1 : 0;
}
+static int perf_evsel__set_tracepoint_name(struct perf_evsel *evsel)
+{
+ struct event_format *event = trace_find_event(evsel->attr.config);
+ char bf[128];
+
+ if (event == NULL)
+ return -1;
+
+ snprintf(bf, sizeof(bf), "%s:%s", event->system, event->name);
+ evsel->name = strdup(bf);
+ if (event->name == NULL)
+ return -1;
+
+ return 0;
+}
+
+static int perf_evlist__set_tracepoint_names(struct perf_evlist *evlist)
+{
+ struct perf_evsel *pos;
+
+ list_for_each_entry(pos, &evlist->entries, node) {
+ if (pos->attr.type == PERF_TYPE_TRACEPOINT &&
+ perf_evsel__set_tracepoint_name(pos))
+ return -1;
+ }
+
+ return 0;
+}
+
int perf_session__read_header(struct perf_session *session, int fd)
{
struct perf_header *header = &session->header;
lseek(fd, header->data_offset, SEEK_SET);
+ if (perf_evlist__set_tracepoint_names(session->evlist))
+ goto out_delete_evlist;
+
header->frozen = 1;
return 0;
out_errno:
#define BITS_PER_LONG __WORDSIZE
#define BITS_PER_BYTE 8
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
+#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
#define for_each_set_bit(bit, addr, size) \
for ((bit) = find_first_bit((addr), (size)); \
tool->finished_round = process_finished_round_stub;
}
}
+
+void mem_bswap_32(void *src, int byte_size)
+{
+ u32 *m = src;
+ while (byte_size > 0) {
+ *m = bswap_32(*m);
+ byte_size -= sizeof(u32);
+ ++m;
+ }
+}
void mem_bswap_64(void *src, int byte_size)
{
bool perf_session__has_traces(struct perf_session *self, const char *msg);
void mem_bswap_64(void *src, int byte_size);
+void mem_bswap_32(void *src, int byte_size);
void perf_event__attr_swap(struct perf_event_attr *attr);
int perf_session__create_kernel_maps(struct perf_session *self);
int r = 0, idx;
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
- u8 header_type;
if (!(assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU))
return -EINVAL;
}
/* Don't allow bridges to be assigned */
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
- if ((header_type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) {
+ if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) {
r = -EPERM;
goto out_put;
}
Code Review / linux-3.10.git / commitdiff