Staging: sxg: Add support to download the firmware using request_firmware()
[linux-3.10.git] / firmware / Makefile
index 28f975f..1666489 100644 (file)
@@ -20,13 +20,48 @@ fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
 # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
 # But be aware that the config file might not be included at all.
 
+ifdef CONFIG_ACENIC_OMIT_TIGON_I
+acenic-objs := acenic/tg2.bin
+fw-shipped- += acenic/tg1.bin
+else
+acenic-objs := acenic/tg1.bin acenic/tg2.bin
+endif
+fw-shipped-$(CONFIG_3C359) += 3com/3C359.bin
+fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
+fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
+                                        adaptec/starfire_tx.bin
+fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
+fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
+fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
+fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
+fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
+                                  cxgb3/t3c_psram-1.1.0.bin \
+                                  cxgb3/t3fw-7.1.0.bin
 fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
+fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
+                            e100/d102e_ucode.bin
+fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
                                     ess/maestro3_assp_minisrc.fw
+fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
+                                    sb16/ima_adpcm_init.csp \
+                                    sb16/ima_adpcm_playback.csp \
+                                    sb16/ima_adpcm_capture.csp
+fw-shipped-$(CONFIG_SLICOSS) += slicoss/gbdownload.sys slicoss/gbrcvucode.sys \
+                               slicoss/oasisdbgdownload.sys \
+                               slicoss/oasisdownload.sys \
+                               slicoss/oasisrcvucode.sys
+fw-shipped-$(CONFIG_SXG) += sxg/saharadownloadB.sys \
+                               sxg/saharadbgdownloadB.sys
 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
                                   yamaha/ds1e_ctrl.fw
+fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
+fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
+                              tigon/tg3_tso5.bin
+fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
+fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
 fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
                                  emi26/bitstream.fw
 fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
@@ -48,14 +83,23 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
 else
-fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw       \
+fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw       \
        keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw         \
        keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw          \
        keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
 endif
-fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
+fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
+                                     mts_cdma.fw mts_gsm.fw mts_edge.fw
+fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
+                                           edgeport/down.fw edgeport/down2.fw
+fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
+fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
+                                          # whiteheat_loader_debug.fw
 fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
 fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
+fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
+fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
+fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
 
 fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
 
@@ -69,10 +113,10 @@ quiet_cmd_ihex  = IHEX    $@
       cmd_ihex  = $(OBJCOPY) -Iihex -Obinary $< $@
 
 quiet_cmd_ihex2fw  = IHEX2FW $@
-      cmd_ihex2fw  = $(objtree)/$(obj)/ihex2fw $< $@
+      cmd_ihex2fw  = $(objtree)/scripts/ihex2fw $< $@
 
 quiet_cmd_h16tofw  = H16TOFW $@
-      cmd_h16tofw  = $(objtree)/$(obj)/ihex2fw -w $< $@
+      cmd_h16tofw  = $(objtree)/scripts/ihex2fw -w $< $@
 
 quiet_cmd_fwbin = MK_FW   $@
       cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)";               \
@@ -119,7 +163,7 @@ $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
                | $(objtree)/$$(dir %)
        $(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
 $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
-               include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %)
+               include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
        $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
 
 # The .o files depend on the binaries directly; the .S files don't.
@@ -135,11 +179,11 @@ $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
 # is actually meaningful, because the firmware has to be loaded in a certain
 # order rather than as a single binary blob. Thus, we convert them into our
 # more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX  | $(objtree)/$(obj)/$$(dir %)
        $(call cmd,ihex2fw)
 
 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 | $(objtree)/$(obj)/$$(dir %)
        $(call cmd,h16tofw)
 
 $(firmware-dirs):
@@ -156,5 +200,3 @@ targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
 # Without this, built-in.o won't be created when it's empty, and the
 # final vmlinux link will fail.
 obj-n := dummy
-
-hostprogs-y := ihex2fw