#include <linux/log2.h>
#include <linux/pci-aspm.h>
#include <linux/pm_wakeup.h>
+#include <linux/interrupt.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */
+#include <linux/device.h>
+#include <asm/setup.h>
#include "pci.h"
-unsigned int pci_pm_d3_delay = 10;
+const char *pci_power_names[] = {
+ "error", "D0", "D1", "D2", "D3hot", "D3cold", "unknown",
+};
+EXPORT_SYMBOL_GPL(pci_power_names);
+
+unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
#ifdef CONFIG_PCI_DOMAINS
int pci_domains_supported = 1;
}
EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
+#ifdef CONFIG_HAS_IOMEM
+void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
+{
+ /*
+ * Make sure the BAR is actually a memory resource, not an IO resource
+ */
+ if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
+ WARN_ON(1);
+ return NULL;
+ }
+ return ioremap_nocache(pci_resource_start(pdev, bar),
+ pci_resource_len(pdev, bar));
+}
+EXPORT_SYMBOL_GPL(pci_ioremap_bar);
+#endif
+
#if 0
/**
* pci_max_busnr - returns maximum PCI bus number
int pci_find_ext_capability(struct pci_dev *dev, int cap)
{
u32 header;
- int ttl = 480; /* 3840 bytes, minimum 8 bytes per capability */
- int pos = 0x100;
+ int ttl;
+ int pos = PCI_CFG_SPACE_SIZE;
+
+ /* minimum 8 bytes per capability */
+ ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
- if (dev->cfg_size <= 256)
+ if (dev->cfg_size <= PCI_CFG_SPACE_SIZE)
return 0;
if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
return pos;
pos = PCI_EXT_CAP_NEXT(header);
- if (pos < 0x100)
+ if (pos < PCI_CFG_SPACE_SIZE)
break;
if (pci_read_config_dword(dev, pos, &header) != PCIBIOS_SUCCESSFUL)
static void
pci_restore_bars(struct pci_dev *dev)
{
- int i, numres;
-
- switch (dev->hdr_type) {
- case PCI_HEADER_TYPE_NORMAL:
- numres = 6;
- break;
- case PCI_HEADER_TYPE_BRIDGE:
- numres = 2;
- break;
- case PCI_HEADER_TYPE_CARDBUS:
- numres = 1;
- break;
- default:
- /* Should never get here, but just in case... */
- return;
- }
+ int i;
- for (i = 0; i < numres; i ++)
- pci_update_resource(dev, &dev->resource[i], i);
+ for (i = 0; i < PCI_BRIDGE_RESOURCES; i++)
+ pci_update_resource(dev, i);
}
static struct pci_platform_pm_ops *pci_platform_pm;
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
-static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
{
u16 pmcsr;
bool need_restore = false;
+ /* Check if we're already there */
+ if (dev->current_state == state)
+ return 0;
+
if (!dev->pm_cap)
return -EIO;
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
*/
- if (dev->current_state == state) {
- /* we're already there */
- return 0;
- } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold
+ if (state != PCI_D0 && dev->current_state <= PCI_D3cold
&& dev->current_state > state) {
dev_err(&dev->dev, "invalid power transition "
"(from state %d to %d)\n", dev->current_state, state);
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= state;
break;
+ case PCI_D3hot:
+ case PCI_D3cold:
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
msleep(pci_pm_d3_delay);
else if (state == PCI_D2 || dev->current_state == PCI_D2)
- udelay(200);
+ udelay(PCI_PM_D2_DELAY);
dev->current_state = state;
* pci_update_current_state - Read PCI power state of given device from its
* PCI PM registers and cache it
* @dev: PCI device to handle.
+ * @state: State to cache in case the device doesn't have the PM capability
*/
-static void pci_update_current_state(struct pci_dev *dev)
+void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
{
if (dev->pm_cap) {
u16 pmcsr;
pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ } else {
+ dev->current_state = state;
}
}
+/**
+ * pci_platform_power_transition - Use platform to change device power state
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ */
+static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ int error;
+
+ if (platform_pci_power_manageable(dev)) {
+ error = platform_pci_set_power_state(dev, state);
+ if (!error)
+ pci_update_current_state(dev, state);
+ } else {
+ error = -ENODEV;
+ /* Fall back to PCI_D0 if native PM is not supported */
+ if (!dev->pm_cap)
+ dev->current_state = PCI_D0;
+ }
+
+ return error;
+}
+
+/**
+ * __pci_start_power_transition - Start power transition of a PCI device
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ */
+static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ if (state == PCI_D0)
+ pci_platform_power_transition(dev, PCI_D0);
+}
+
+/**
+ * __pci_complete_power_transition - Complete power transition of a PCI device
+ * @dev: PCI device to handle.
+ * @state: State to put the device into.
+ *
+ * This function should not be called directly by device drivers.
+ */
+int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
+{
+ return state > PCI_D0 ?
+ pci_platform_power_transition(dev, state) : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
+
/**
* pci_set_power_state - Set the power state of a PCI device
* @dev: PCI device to handle.
* @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
*
- * Transition a device to a new power state, using the platform formware and/or
+ * Transition a device to a new power state, using the platform firmware and/or
* the device's PCI PM registers.
*
* RETURN VALUE:
*/
return 0;
- if (state == PCI_D0 && platform_pci_power_manageable(dev)) {
- /*
- * Allow the platform to change the state, for example via ACPI
- * _PR0, _PS0 and some such, but do not trust it.
- */
- int ret = platform_pci_set_power_state(dev, PCI_D0);
- if (!ret)
- pci_update_current_state(dev);
- }
+ /* Check if we're already there */
+ if (dev->current_state == state)
+ return 0;
+
+ __pci_start_power_transition(dev, state);
+
/* This device is quirked not to be put into D3, so
don't put it in D3 */
if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
error = pci_raw_set_power_state(dev, state);
- if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
- /* Allow the platform to finalize the transition */
- int ret = platform_pci_set_power_state(dev, state);
- if (!ret) {
- pci_update_current_state(dev);
- error = 0;
- }
- }
+ if (!__pci_complete_power_transition(dev, state))
+ error = 0;
return error;
}
EXPORT_SYMBOL(pci_choose_state);
+#define PCI_EXP_SAVE_REGS 7
+
+#define pcie_cap_has_devctl(type, flags) 1
+#define pcie_cap_has_lnkctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ (type == PCI_EXP_TYPE_ROOT_PORT || \
+ type == PCI_EXP_TYPE_ENDPOINT || \
+ type == PCI_EXP_TYPE_LEG_END))
+#define pcie_cap_has_sltctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ ((type == PCI_EXP_TYPE_ROOT_PORT) || \
+ (type == PCI_EXP_TYPE_DOWNSTREAM && \
+ (flags & PCI_EXP_FLAGS_SLOT))))
+#define pcie_cap_has_rtctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ (type == PCI_EXP_TYPE_ROOT_PORT || \
+ type == PCI_EXP_TYPE_RC_EC))
+#define pcie_cap_has_devctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_lnkctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_sltctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+
static int pci_save_pcie_state(struct pci_dev *dev)
{
int pos, i = 0;
struct pci_cap_saved_state *save_state;
u16 *cap;
- int found = 0;
+ u16 flags;
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (pos <= 0)
return 0;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
- if (!save_state)
- save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 4, GFP_KERNEL);
- else
- found = 1;
if (!save_state) {
- dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
+ dev_err(&dev->dev, "buffer not found in %s\n", __func__);
return -ENOMEM;
}
cap = (u16 *)&save_state->data[0];
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
- save_state->cap_nr = PCI_CAP_ID_EXP;
- if (!found)
- pci_add_saved_cap(dev, save_state);
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+ if (pcie_cap_has_devctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
+ if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
+ if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
+ if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+ if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
+ if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
+ if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
+
return 0;
}
int i = 0, pos;
struct pci_cap_saved_state *save_state;
u16 *cap;
+ u16 flags;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
return;
cap = (u16 *)&save_state->data[0];
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+ if (pcie_cap_has_devctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
+ if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
+ if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
+ if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+ if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
+ if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
+ if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
}
static int pci_save_pcix_state(struct pci_dev *dev)
{
- int pos, i = 0;
+ int pos;
struct pci_cap_saved_state *save_state;
- u16 *cap;
- int found = 0;
pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (pos <= 0)
return 0;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
- if (!save_state)
- save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
- else
- found = 1;
if (!save_state) {
- dev_err(&dev->dev, "out of memory in pci_save_pcie_state\n");
+ dev_err(&dev->dev, "buffer not found in %s\n", __func__);
return -ENOMEM;
}
- cap = (u16 *)&save_state->data[0];
- pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
- save_state->cap_nr = PCI_CAP_ID_PCIX;
- if (!found)
- pci_add_saved_cap(dev, save_state);
+ pci_read_config_word(dev, pos + PCI_X_CMD, (u16 *)save_state->data);
+
return 0;
}
/* XXX: 100% dword access ok here? */
for (i = 0; i < 16; i++)
pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+ dev->state_saved = true;
if ((i = pci_save_pcie_state(dev)) != 0)
return i;
if ((i = pci_save_pcix_state(dev)) != 0)
}
pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
+ pci_restore_iov_state(dev);
return 0;
}
*/
int pci_reenable_device(struct pci_dev *dev)
{
- if (atomic_read(&dev->enable_cnt))
+ if (pci_is_enabled(dev))
return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
return 0;
}
*/
void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
+static void do_pci_disable_device(struct pci_dev *dev)
+{
+ u16 pci_command;
+
+ pci_read_config_word(dev, PCI_COMMAND, &pci_command);
+ if (pci_command & PCI_COMMAND_MASTER) {
+ pci_command &= ~PCI_COMMAND_MASTER;
+ pci_write_config_word(dev, PCI_COMMAND, pci_command);
+ }
+
+ pcibios_disable_device(dev);
+}
+
+/**
+ * pci_disable_enabled_device - Disable device without updating enable_cnt
+ * @dev: PCI device to disable
+ *
+ * NOTE: This function is a backend of PCI power management routines and is
+ * not supposed to be called drivers.
+ */
+void pci_disable_enabled_device(struct pci_dev *dev)
+{
+ if (pci_is_enabled(dev))
+ do_pci_disable_device(dev);
+}
+
/**
* pci_disable_device - Disable PCI device after use
* @dev: PCI device to be disabled
pci_disable_device(struct pci_dev *dev)
{
struct pci_devres *dr;
- u16 pci_command;
dr = find_pci_dr(dev);
if (dr)
if (atomic_sub_return(1, &dev->enable_cnt) != 0)
return;
- pci_read_config_word(dev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_MASTER) {
- pci_command &= ~PCI_COMMAND_MASTER;
- pci_write_config_word(dev, PCI_COMMAND, pci_command);
- }
- dev->is_busmaster = 0;
+ do_pci_disable_device(dev);
- pcibios_disable_device(dev);
+ dev->is_busmaster = 0;
}
/**
* Error code depending on the platform is returned if both the platform and
* the native mechanism fail to enable the generation of wake-up events
*/
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
+int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
{
int error = 0;
bool pme_done = false;
- if (!device_may_wakeup(&dev->dev))
+ if (enable && !device_may_wakeup(&dev->dev))
return -EINVAL;
/*
return pme_done ? 0 : error;
}
+/**
+ * pci_wake_from_d3 - enable/disable device to wake up from D3_hot or D3_cold
+ * @dev: PCI device to prepare
+ * @enable: True to enable wake-up event generation; false to disable
+ *
+ * Many drivers want the device to wake up the system from D3_hot or D3_cold
+ * and this function allows them to set that up cleanly - pci_enable_wake()
+ * should not be called twice in a row to enable wake-up due to PCI PM vs ACPI
+ * ordering constraints.
+ *
+ * This function only returns error code if the device is not capable of
+ * generating PME# from both D3_hot and D3_cold, and the platform is unable to
+ * enable wake-up power for it.
+ */
+int pci_wake_from_d3(struct pci_dev *dev, bool enable)
+{
+ return pci_pme_capable(dev, PCI_D3cold) ?
+ pci_enable_wake(dev, PCI_D3cold, enable) :
+ pci_enable_wake(dev, PCI_D3hot, enable);
+}
+
/**
* pci_target_state - find an appropriate low power state for a given PCI dev
* @dev: PCI device
default:
target_state = state;
}
+ } else if (!dev->pm_cap) {
+ target_state = PCI_D0;
} else if (device_may_wakeup(&dev->dev)) {
/*
* Find the deepest state from which the device can generate
* wake-up events, make it the target state and enable device
* to generate PME#.
*/
- if (!dev->pm_cap)
- return PCI_POWER_ERROR;
-
if (dev->pme_support) {
while (target_state
&& !(dev->pme_support & (1 << target_state)))
if (target_state == PCI_POWER_ERROR)
return -EIO;
- pci_enable_wake(dev, target_state, true);
+ pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
dev->d1_support = false;
dev->d2_support = false;
if (!pci_no_d1d2(dev)) {
- if (pmc & PCI_PM_CAP_D1) {
- dev_printk(KERN_DEBUG, &dev->dev, "supports D1\n");
+ if (pmc & PCI_PM_CAP_D1)
dev->d1_support = true;
- }
- if (pmc & PCI_PM_CAP_D2) {
- dev_printk(KERN_DEBUG, &dev->dev, "supports D2\n");
+ if (pmc & PCI_PM_CAP_D2)
dev->d2_support = true;
- }
+
+ if (dev->d1_support || dev->d2_support)
+ dev_printk(KERN_DEBUG, &dev->dev, "supports%s%s\n",
+ dev->d1_support ? " D1" : "",
+ dev->d2_support ? " D2" : "");
}
pmc &= PCI_PM_CAP_PME_MASK;
if (pmc) {
- dev_printk(KERN_INFO, &dev->dev,
- "PME# supported from%s%s%s%s%s\n",
- (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
- (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
- (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
- (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
- (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
+ dev_info(&dev->dev, "PME# supported from%s%s%s%s%s\n",
+ (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
+ (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
+ (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
+ (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
+ (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
/*
* Make device's PM flags reflect the wake-up capability, but
}
}
+/**
+ * platform_pci_wakeup_init - init platform wakeup if present
+ * @dev: PCI device
+ *
+ * Some devices don't have PCI PM caps but can still generate wakeup
+ * events through platform methods (like ACPI events). If @dev supports
+ * platform wakeup events, set the device flag to indicate as much. This
+ * may be redundant if the device also supports PCI PM caps, but double
+ * initialization should be safe in that case.
+ */
+void platform_pci_wakeup_init(struct pci_dev *dev)
+{
+ if (!platform_pci_can_wakeup(dev))
+ return;
+
+ device_set_wakeup_capable(&dev->dev, true);
+ device_set_wakeup_enable(&dev->dev, false);
+ platform_pci_sleep_wake(dev, false);
+}
+
+/**
+ * pci_add_save_buffer - allocate buffer for saving given capability registers
+ * @dev: the PCI device
+ * @cap: the capability to allocate the buffer for
+ * @size: requested size of the buffer
+ */
+static int pci_add_cap_save_buffer(
+ struct pci_dev *dev, char cap, unsigned int size)
+{
+ int pos;
+ struct pci_cap_saved_state *save_state;
+
+ pos = pci_find_capability(dev, cap);
+ if (pos <= 0)
+ return 0;
+
+ save_state = kzalloc(sizeof(*save_state) + size, GFP_KERNEL);
+ if (!save_state)
+ return -ENOMEM;
+
+ save_state->cap_nr = cap;
+ pci_add_saved_cap(dev, save_state);
+
+ return 0;
+}
+
+/**
+ * pci_allocate_cap_save_buffers - allocate buffers for saving capabilities
+ * @dev: the PCI device
+ */
+void pci_allocate_cap_save_buffers(struct pci_dev *dev)
+{
+ int error;
+
+ error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_EXP,
+ PCI_EXP_SAVE_REGS * sizeof(u16));
+ if (error)
+ dev_err(&dev->dev,
+ "unable to preallocate PCI Express save buffer\n");
+
+ error = pci_add_cap_save_buffer(dev, PCI_CAP_ID_PCIX, sizeof(u16));
+ if (error)
+ dev_err(&dev->dev,
+ "unable to preallocate PCI-X save buffer\n");
+}
+
+/**
+ * pci_enable_ari - enable ARI forwarding if hardware support it
+ * @dev: the PCI device
+ */
+void pci_enable_ari(struct pci_dev *dev)
+{
+ int pos;
+ u32 cap;
+ u16 ctrl;
+ struct pci_dev *bridge;
+
+ if (!dev->is_pcie || dev->devfn)
+ return;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
+ if (!pos)
+ return;
+
+ bridge = dev->bus->self;
+ if (!bridge || !bridge->is_pcie)
+ return;
+
+ pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
+ if (!pos)
+ return;
+
+ pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
+ if (!(cap & PCI_EXP_DEVCAP2_ARI))
+ return;
+
+ pci_read_config_word(bridge, pos + PCI_EXP_DEVCTL2, &ctrl);
+ ctrl |= PCI_EXP_DEVCTL2_ARI;
+ pci_write_config_word(bridge, pos + PCI_EXP_DEVCTL2, ctrl);
+
+ bridge->ari_enabled = 1;
+}
+
+/**
+ * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
+ * @dev: the PCI device
+ * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
+ *
+ * Perform INTx swizzling for a device behind one level of bridge. This is
+ * required by section 9.1 of the PCI-to-PCI bridge specification for devices
+ * behind bridges on add-in cards.
+ */
+u8 pci_swizzle_interrupt_pin(struct pci_dev *dev, u8 pin)
+{
+ return (((pin - 1) + PCI_SLOT(dev->devfn)) % 4) + 1;
+}
+
int
pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge)
{
pin = dev->pin;
if (!pin)
return -1;
- pin--;
- while (dev->bus->self) {
- pin = (pin + PCI_SLOT(dev->devfn)) % 4;
+
+ while (!pci_is_root_bus(dev->bus)) {
+ pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
}
*bridge = dev;
return pin;
}
+/**
+ * pci_common_swizzle - swizzle INTx all the way to root bridge
+ * @dev: the PCI device
+ * @pinp: pointer to the INTx pin value (1=INTA, 2=INTB, 3=INTD, 4=INTD)
+ *
+ * Perform INTx swizzling for a device. This traverses through all PCI-to-PCI
+ * bridges all the way up to a PCI root bus.
+ */
+u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ u8 pin = *pinp;
+
+ while (!pci_is_root_bus(dev->bus)) {
+ pin = pci_swizzle_interrupt_pin(dev, pin);
+ dev = dev->bus->self;
+ }
+ *pinp = pin;
+ return PCI_SLOT(dev->devfn);
+}
+
/**
* pci_release_region - Release a PCI bar
* @pdev: PCI device whose resources were previously reserved by pci_request_region
}
/**
- * pci_request_region - Reserved PCI I/O and memory resource
+ * __pci_request_region - Reserved PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource.
+ * @exclusive: whether the region access is exclusive or not
*
* Mark the PCI region associated with PCI device @pdev BR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
+ * If @exclusive is set, then the region is marked so that userspace
+ * is explicitly not allowed to map the resource via /dev/mem or
+ * sysfs MMIO access.
+ *
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
-int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
+static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_name,
+ int exclusive)
{
struct pci_devres *dr;
goto err_out;
}
else if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
- if (!request_mem_region(pci_resource_start(pdev, bar),
- pci_resource_len(pdev, bar), res_name))
+ if (!__request_mem_region(pci_resource_start(pdev, bar),
+ pci_resource_len(pdev, bar), res_name,
+ exclusive))
goto err_out;
}
return 0;
err_out:
- dev_warn(&pdev->dev, "BAR %d: can't reserve %s region [%#llx-%#llx]\n",
+ dev_warn(&pdev->dev, "BAR %d: can't reserve %s region %pR\n",
bar,
pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
- (unsigned long long)pci_resource_start(pdev, bar),
- (unsigned long long)pci_resource_end(pdev, bar));
+ &pdev->resource[bar]);
return -EBUSY;
}
+/**
+ * pci_request_region - Reserve PCI I/O and memory resource
+ * @pdev: PCI device whose resources are to be reserved
+ * @bar: BAR to be reserved
+ * @res_name: Name to be associated with resource
+ *
+ * Mark the PCI region associated with PCI device @pdev BAR @bar as
+ * being reserved by owner @res_name. Do not access any
+ * address inside the PCI regions unless this call returns
+ * successfully.
+ *
+ * Returns 0 on success, or %EBUSY on error. A warning
+ * message is also printed on failure.
+ */
+int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
+{
+ return __pci_request_region(pdev, bar, res_name, 0);
+}
+
+/**
+ * pci_request_region_exclusive - Reserved PCI I/O and memory resource
+ * @pdev: PCI device whose resources are to be reserved
+ * @bar: BAR to be reserved
+ * @res_name: Name to be associated with resource.
+ *
+ * Mark the PCI region associated with PCI device @pdev BR @bar as
+ * being reserved by owner @res_name. Do not access any
+ * address inside the PCI regions unless this call returns
+ * successfully.
+ *
+ * Returns 0 on success, or %EBUSY on error. A warning
+ * message is also printed on failure.
+ *
+ * The key difference that _exclusive makes it that userspace is
+ * explicitly not allowed to map the resource via /dev/mem or
+ * sysfs.
+ */
+int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name)
+{
+ return __pci_request_region(pdev, bar, res_name, IORESOURCE_EXCLUSIVE);
+}
/**
* pci_release_selected_regions - Release selected PCI I/O and memory resources
* @pdev: PCI device whose resources were previously reserved
pci_release_region(pdev, i);
}
-/**
- * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
- * @pdev: PCI device whose resources are to be reserved
- * @bars: Bitmask of BARs to be requested
- * @res_name: Name to be associated with resource
- */
-int pci_request_selected_regions(struct pci_dev *pdev, int bars,
- const char *res_name)
+int __pci_request_selected_regions(struct pci_dev *pdev, int bars,
+ const char *res_name, int excl)
{
int i;
for (i = 0; i < 6; i++)
if (bars & (1 << i))
- if(pci_request_region(pdev, i, res_name))
+ if (__pci_request_region(pdev, i, res_name, excl))
goto err_out;
return 0;
return -EBUSY;
}
+
+/**
+ * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
+ * @pdev: PCI device whose resources are to be reserved
+ * @bars: Bitmask of BARs to be requested
+ * @res_name: Name to be associated with resource
+ */
+int pci_request_selected_regions(struct pci_dev *pdev, int bars,
+ const char *res_name)
+{
+ return __pci_request_selected_regions(pdev, bars, res_name, 0);
+}
+
+int pci_request_selected_regions_exclusive(struct pci_dev *pdev,
+ int bars, const char *res_name)
+{
+ return __pci_request_selected_regions(pdev, bars, res_name,
+ IORESOURCE_EXCLUSIVE);
+}
+
/**
* pci_release_regions - Release reserved PCI I/O and memory resources
* @pdev: PCI device whose resources were previously reserved by pci_request_regions
return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
}
+/**
+ * pci_request_regions_exclusive - Reserved PCI I/O and memory resources
+ * @pdev: PCI device whose resources are to be reserved
+ * @res_name: Name to be associated with resource.
+ *
+ * Mark all PCI regions associated with PCI device @pdev as
+ * being reserved by owner @res_name. Do not access any
+ * address inside the PCI regions unless this call returns
+ * successfully.
+ *
+ * pci_request_regions_exclusive() will mark the region so that
+ * /dev/mem and the sysfs MMIO access will not be allowed.
+ *
+ * Returns 0 on success, or %EBUSY on error. A warning
+ * message is also printed on failure.
+ */
+int pci_request_regions_exclusive(struct pci_dev *pdev, const char *res_name)
+{
+ return pci_request_selected_regions_exclusive(pdev,
+ ((1 << 6) - 1), res_name);
+}
+
+static void __pci_set_master(struct pci_dev *dev, bool enable)
+{
+ u16 old_cmd, cmd;
+
+ pci_read_config_word(dev, PCI_COMMAND, &old_cmd);
+ if (enable)
+ cmd = old_cmd | PCI_COMMAND_MASTER;
+ else
+ cmd = old_cmd & ~PCI_COMMAND_MASTER;
+ if (cmd != old_cmd) {
+ dev_dbg(&dev->dev, "%s bus mastering\n",
+ enable ? "enabling" : "disabling");
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ dev->is_busmaster = enable;
+}
+
/**
* pci_set_master - enables bus-mastering for device dev
* @dev: the PCI device to enable
* Enables bus-mastering on the device and calls pcibios_set_master()
* to do the needed arch specific settings.
*/
-void
-pci_set_master(struct pci_dev *dev)
+void pci_set_master(struct pci_dev *dev)
{
- u16 cmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- if (! (cmd & PCI_COMMAND_MASTER)) {
- dev_dbg(&dev->dev, "enabling bus mastering\n");
- cmd |= PCI_COMMAND_MASTER;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- dev->is_busmaster = 1;
+ __pci_set_master(dev, true);
pcibios_set_master(dev);
}
+/**
+ * pci_clear_master - disables bus-mastering for device dev
+ * @dev: the PCI device to disable
+ */
+void pci_clear_master(struct pci_dev *dev)
+{
+ __pci_set_master(dev, false);
+}
+
#ifdef PCI_DISABLE_MWI
int pci_set_mwi(struct pci_dev *dev)
{
EXPORT_SYMBOL(pci_set_dma_seg_boundary);
#endif
+static int pcie_flr(struct pci_dev *dev, int probe)
+{
+ int i;
+ int pos;
+ u32 cap;
+ u16 status;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return -ENOTTY;
+
+ pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
+ if (!(cap & PCI_EXP_DEVCAP_FLR))
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ /* Wait for Transaction Pending bit clean */
+ for (i = 0; i < 4; i++) {
+ if (i)
+ msleep((1 << (i - 1)) * 100);
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
+ if (!(status & PCI_EXP_DEVSTA_TRPND))
+ goto clear;
+ }
+
+ dev_err(&dev->dev, "transaction is not cleared; "
+ "proceeding with reset anyway\n");
+
+clear:
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_BCR_FLR);
+ msleep(100);
+
+ return 0;
+}
+
+static int pci_af_flr(struct pci_dev *dev, int probe)
+{
+ int i;
+ int pos;
+ u8 cap;
+ u8 status;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_AF);
+ if (!pos)
+ return -ENOTTY;
+
+ pci_read_config_byte(dev, pos + PCI_AF_CAP, &cap);
+ if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ /* Wait for Transaction Pending bit clean */
+ for (i = 0; i < 4; i++) {
+ if (i)
+ msleep((1 << (i - 1)) * 100);
+
+ pci_read_config_byte(dev, pos + PCI_AF_STATUS, &status);
+ if (!(status & PCI_AF_STATUS_TP))
+ goto clear;
+ }
+
+ dev_err(&dev->dev, "transaction is not cleared; "
+ "proceeding with reset anyway\n");
+
+clear:
+ pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
+ msleep(100);
+
+ return 0;
+}
+
+static int pci_pm_reset(struct pci_dev *dev, int probe)
+{
+ u16 csr;
+
+ if (!dev->pm_cap)
+ return -ENOTTY;
+
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &csr);
+ if (csr & PCI_PM_CTRL_NO_SOFT_RESET)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ if (dev->current_state != PCI_D0)
+ return -EINVAL;
+
+ csr &= ~PCI_PM_CTRL_STATE_MASK;
+ csr |= PCI_D3hot;
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+ msleep(pci_pm_d3_delay);
+
+ csr &= ~PCI_PM_CTRL_STATE_MASK;
+ csr |= PCI_D0;
+ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
+ msleep(pci_pm_d3_delay);
+
+ return 0;
+}
+
+static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+{
+ u16 ctrl;
+ struct pci_dev *pdev;
+
+ if (dev->subordinate)
+ return -ENOTTY;
+
+ list_for_each_entry(pdev, &dev->bus->devices, bus_list)
+ if (pdev != dev)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
+ ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+ msleep(100);
+
+ ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
+ msleep(100);
+
+ return 0;
+}
+
+static int pci_dev_reset(struct pci_dev *dev, int probe)
+{
+ int rc;
+
+ might_sleep();
+
+ if (!probe) {
+ pci_block_user_cfg_access(dev);
+ /* block PM suspend, driver probe, etc. */
+ down(&dev->dev.sem);
+ }
+
+ rc = pcie_flr(dev, probe);
+ if (rc != -ENOTTY)
+ goto done;
+
+ rc = pci_af_flr(dev, probe);
+ if (rc != -ENOTTY)
+ goto done;
+
+ rc = pci_pm_reset(dev, probe);
+ if (rc != -ENOTTY)
+ goto done;
+
+ rc = pci_parent_bus_reset(dev, probe);
+done:
+ if (!probe) {
+ up(&dev->dev.sem);
+ pci_unblock_user_cfg_access(dev);
+ }
+
+ return rc;
+}
+
+/**
+ * __pci_reset_function - reset a PCI device function
+ * @dev: PCI device to reset
+ *
+ * Some devices allow an individual function to be reset without affecting
+ * other functions in the same device. The PCI device must be responsive
+ * to PCI config space in order to use this function.
+ *
+ * The device function is presumed to be unused when this function is called.
+ * Resetting the device will make the contents of PCI configuration space
+ * random, so any caller of this must be prepared to reinitialise the
+ * device including MSI, bus mastering, BARs, decoding IO and memory spaces,
+ * etc.
+ *
+ * Returns 0 if the device function was successfully reset or negative if the
+ * device doesn't support resetting a single function.
+ */
+int __pci_reset_function(struct pci_dev *dev)
+{
+ return pci_dev_reset(dev, 0);
+}
+EXPORT_SYMBOL_GPL(__pci_reset_function);
+
+/**
+ * pci_reset_function - quiesce and reset a PCI device function
+ * @dev: PCI device to reset
+ *
+ * Some devices allow an individual function to be reset without affecting
+ * other functions in the same device. The PCI device must be responsive
+ * to PCI config space in order to use this function.
+ *
+ * This function does not just reset the PCI portion of a device, but
+ * clears all the state associated with the device. This function differs
+ * from __pci_reset_function in that it saves and restores device state
+ * over the reset.
+ *
+ * Returns 0 if the device function was successfully reset or negative if the
+ * device doesn't support resetting a single function.
+ */
+int pci_reset_function(struct pci_dev *dev)
+{
+ int rc;
+
+ rc = pci_dev_reset(dev, 1);
+ if (rc)
+ return rc;
+
+ pci_save_state(dev);
+
+ /*
+ * both INTx and MSI are disabled after the Interrupt Disable bit
+ * is set and the Bus Master bit is cleared.
+ */
+ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+
+ rc = pci_dev_reset(dev, 0);
+
+ pci_restore_state(dev);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(pci_reset_function);
+
/**
* pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
* @dev: PCI device to query
return bars;
}
+/**
+ * pci_resource_bar - get position of the BAR associated with a resource
+ * @dev: the PCI device
+ * @resno: the resource number
+ * @type: the BAR type to be filled in
+ *
+ * Returns BAR position in config space, or 0 if the BAR is invalid.
+ */
+int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
+{
+ int reg;
+
+ if (resno < PCI_ROM_RESOURCE) {
+ *type = pci_bar_unknown;
+ return PCI_BASE_ADDRESS_0 + 4 * resno;
+ } else if (resno == PCI_ROM_RESOURCE) {
+ *type = pci_bar_mem32;
+ return dev->rom_base_reg;
+ } else if (resno < PCI_BRIDGE_RESOURCES) {
+ /* device specific resource */
+ reg = pci_iov_resource_bar(dev, resno, type);
+ if (reg)
+ return reg;
+ }
+
+ dev_err(&dev->dev, "BAR: invalid resource #%d\n", resno);
+ return 0;
+}
+
+#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
+static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
+spinlock_t resource_alignment_lock = SPIN_LOCK_UNLOCKED;
+
+/**
+ * pci_specified_resource_alignment - get resource alignment specified by user.
+ * @dev: the PCI device to get
+ *
+ * RETURNS: Resource alignment if it is specified.
+ * Zero if it is not specified.
+ */
+resource_size_t pci_specified_resource_alignment(struct pci_dev *dev)
+{
+ int seg, bus, slot, func, align_order, count;
+ resource_size_t align = 0;
+ char *p;
+
+ spin_lock(&resource_alignment_lock);
+ p = resource_alignment_param;
+ while (*p) {
+ count = 0;
+ if (sscanf(p, "%d%n", &align_order, &count) == 1 &&
+ p[count] == '@') {
+ p += count + 1;
+ } else {
+ align_order = -1;
+ }
+ if (sscanf(p, "%x:%x:%x.%x%n",
+ &seg, &bus, &slot, &func, &count) != 4) {
+ seg = 0;
+ if (sscanf(p, "%x:%x.%x%n",
+ &bus, &slot, &func, &count) != 3) {
+ /* Invalid format */
+ printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n",
+ p);
+ break;
+ }
+ }
+ p += count;
+ if (seg == pci_domain_nr(dev->bus) &&
+ bus == dev->bus->number &&
+ slot == PCI_SLOT(dev->devfn) &&
+ func == PCI_FUNC(dev->devfn)) {
+ if (align_order == -1) {
+ align = PAGE_SIZE;
+ } else {
+ align = 1 << align_order;
+ }
+ /* Found */
+ break;
+ }
+ if (*p != ';' && *p != ',') {
+ /* End of param or invalid format */
+ break;
+ }
+ p++;
+ }
+ spin_unlock(&resource_alignment_lock);
+ return align;
+}
+
+/**
+ * pci_is_reassigndev - check if specified PCI is target device to reassign
+ * @dev: the PCI device to check
+ *
+ * RETURNS: non-zero for PCI device is a target device to reassign,
+ * or zero is not.
+ */
+int pci_is_reassigndev(struct pci_dev *dev)
+{
+ return (pci_specified_resource_alignment(dev) != 0);
+}
+
+ssize_t pci_set_resource_alignment_param(const char *buf, size_t count)
+{
+ if (count > RESOURCE_ALIGNMENT_PARAM_SIZE - 1)
+ count = RESOURCE_ALIGNMENT_PARAM_SIZE - 1;
+ spin_lock(&resource_alignment_lock);
+ strncpy(resource_alignment_param, buf, count);
+ resource_alignment_param[count] = '\0';
+ spin_unlock(&resource_alignment_lock);
+ return count;
+}
+
+ssize_t pci_get_resource_alignment_param(char *buf, size_t size)
+{
+ size_t count;
+ spin_lock(&resource_alignment_lock);
+ count = snprintf(buf, size, "%s", resource_alignment_param);
+ spin_unlock(&resource_alignment_lock);
+ return count;
+}
+
+static ssize_t pci_resource_alignment_show(struct bus_type *bus, char *buf)
+{
+ return pci_get_resource_alignment_param(buf, PAGE_SIZE);
+}
+
+static ssize_t pci_resource_alignment_store(struct bus_type *bus,
+ const char *buf, size_t count)
+{
+ return pci_set_resource_alignment_param(buf, count);
+}
+
+BUS_ATTR(resource_alignment, 0644, pci_resource_alignment_show,
+ pci_resource_alignment_store);
+
+static int __init pci_resource_alignment_sysfs_init(void)
+{
+ return bus_create_file(&pci_bus_type,
+ &bus_attr_resource_alignment);
+}
+
+late_initcall(pci_resource_alignment_sysfs_init);
+
static void __devinit pci_no_domains(void)
{
#ifdef CONFIG_PCI_DOMAINS
#endif
}
+/**
+ * pci_ext_cfg_enabled - can we access extended PCI config space?
+ * @dev: The PCI device of the root bridge.
+ *
+ * Returns 1 if we can access PCI extended config space (offsets
+ * greater than 0xff). This is the default implementation. Architecture
+ * implementations can override this.
+ */
+int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
+{
+ return 1;
+}
+
static int __devinit pci_init(void)
{
struct pci_dev *dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
pci_fixup_device(pci_fixup_final, dev);
}
+
return 0;
}
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
pci_cardbus_io_size = memparse(str + 9, &str);
} else if (!strncmp(str, "cbmemsize=", 10)) {
pci_cardbus_mem_size = memparse(str + 10, &str);
+ } else if (!strncmp(str, "resource_alignment=", 19)) {
+ pci_set_resource_alignment_param(str + 19,
+ strlen(str + 19));
+ } else if (!strncmp(str, "ecrc=", 5)) {
+ pcie_ecrc_get_policy(str + 5);
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
EXPORT_SYMBOL(pci_bus_find_capability);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_request_regions);
+EXPORT_SYMBOL(pci_request_regions_exclusive);
EXPORT_SYMBOL(pci_release_region);
EXPORT_SYMBOL(pci_request_region);
+EXPORT_SYMBOL(pci_request_region_exclusive);
EXPORT_SYMBOL(pci_release_selected_regions);
EXPORT_SYMBOL(pci_request_selected_regions);
+EXPORT_SYMBOL(pci_request_selected_regions_exclusive);
EXPORT_SYMBOL(pci_set_master);
+EXPORT_SYMBOL(pci_clear_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_try_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL(pci_pme_capable);
EXPORT_SYMBOL(pci_pme_active);
EXPORT_SYMBOL(pci_enable_wake);
+EXPORT_SYMBOL(pci_wake_from_d3);
EXPORT_SYMBOL(pci_target_state);
EXPORT_SYMBOL(pci_prepare_to_sleep);
EXPORT_SYMBOL(pci_back_from_sleep);
Code Review / linux-3.10.git / blobdiff