/*
* linux/drivers/message/fusion/mptscsih.c
- * For use with LSI Logic PCI chip/adapter(s)
- * running LSI Logic Fusion MPT (Message Passing Technology) firmware.
+ * For use with LSI PCI chip/adapter(s)
+ * running LSI Fusion MPT (Message Passing Technology) firmware.
*
- * Copyright (c) 1999-2005 LSI Logic Corporation
- * (mailto:mpt_linux_developer@lsil.com)
+ * Copyright (c) 1999-2008 LSI Corporation
+ * (mailto:DL-MPTFusionLinux@lsi.com)
*
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-#include "linux_compat.h" /* linux-2.6 tweaks */
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kdev_t.h>
#include <linux/delay.h> /* for mdelay */
#include <linux/interrupt.h> /* needed for in_interrupt() proto */
#include <linux/reboot.h> /* notifier code */
-#include <linux/sched.h>
#include <linux/workqueue.h>
#include <scsi/scsi.h>
#include "mptbase.h"
#include "mptscsih.h"
+#include "lsi/mpi_log_sas.h"
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
#define my_NAME "Fusion MPT SCSI Host driver"
MODULE_AUTHOR(MODULEAUTHOR);
MODULE_DESCRIPTION(my_NAME);
MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-
-typedef struct _BIG_SENSE_BUF {
- u8 data[MPT_SENSE_BUFFER_ALLOC];
-} BIG_SENSE_BUF;
-
-#define MPT_SCANDV_GOOD (0x00000000) /* must be 0 */
-#define MPT_SCANDV_DID_RESET (0x00000001)
-#define MPT_SCANDV_SENSE (0x00000002)
-#define MPT_SCANDV_SOME_ERROR (0x00000004)
-#define MPT_SCANDV_SELECTION_TIMEOUT (0x00000008)
-#define MPT_SCANDV_ISSUE_SENSE (0x00000010)
-#define MPT_SCANDV_FALLBACK (0x00000020)
-
-#define MPT_SCANDV_MAX_RETRIES (10)
-
-#define MPT_ICFLAG_BUF_CAP 0x01 /* ReadBuffer Read Capacity format */
-#define MPT_ICFLAG_ECHO 0x02 /* ReadBuffer Echo buffer format */
-#define MPT_ICFLAG_EBOS 0x04 /* ReadBuffer Echo buffer has EBOS */
-#define MPT_ICFLAG_PHYS_DISK 0x08 /* Any SCSI IO but do Phys Disk Format */
-#define MPT_ICFLAG_TAGGED_CMD 0x10 /* Do tagged IO */
-#define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occurred with this command */
-#define MPT_ICFLAG_RESERVED 0x40 /* Reserved has been issued */
-
-typedef struct _internal_cmd {
- char *data; /* data pointer */
- dma_addr_t data_dma; /* data dma address */
- int size; /* transfer size */
- u8 cmd; /* SCSI Op Code */
- u8 bus; /* bus number */
- u8 id; /* SCSI ID (virtual) */
- u8 lun;
- u8 flags; /* Bit Field - See above */
- u8 physDiskNum; /* Phys disk number, -1 else */
- u8 rsvd2;
- u8 rsvd;
-} INTERNAL_CMD;
-
-typedef struct _negoparms {
- u8 width;
- u8 offset;
- u8 factor;
- u8 flags;
-} NEGOPARMS;
-
-typedef struct _dv_parameters {
- NEGOPARMS max;
- NEGOPARMS now;
- u8 cmd;
- u8 id;
- u16 pad1;
-} DVPARAMETERS;
-
/*
* Other private/forward protos...
*/
+struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
+static void mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
+static int SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
SCSIIORequest_t *pReq, int req_idx);
static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
-static int mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
-static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
-static u32 SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc);
-static int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
-static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
+int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
+ int lun, int ctx2abort, ulong timeout);
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
-static void mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data, int dlen);
-static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *vtarget, char byte56);
-static void mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags);
-static void mptscsih_no_negotiate(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc);
-static int mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target, int flags);
-static int mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus);
+void
+mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
+static int mptscsih_get_completion_code(MPT_ADAPTER *ioc,
+ MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
-static void mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtTarget *vtarget);
-static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);
-
-static struct work_struct mptscsih_persistTask;
-
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
-static void mptscsih_domainValidation(void *hd);
-static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id);
-static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target);
-static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage);
-static void mptscsih_fillbuf(char *buffer, int size, int index, int width);
-static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id);
-static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc);
-#endif
+static int
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+ SCSITaskMgmtReply_t *pScsiTmReply);
void mptscsih_remove(struct pci_dev *);
void mptscsih_shutdown(struct pci_dev *);
#ifdef CONFIG_PM
int mptscsih_resume(struct pci_dev *pdev);
#endif
-#define SNS_LEN(scp) sizeof((scp)->sense_buffer)
-
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-/*
- * Domain Validation task structure
- */
-static DEFINE_SPINLOCK(dvtaskQ_lock);
-static int dvtaskQ_active = 0;
-static int dvtaskQ_release = 0;
-static struct work_struct dvTaskQ_task;
-#endif
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_add_sge - Place a simple SGE at address pAddr.
- * @pAddr: virtual address for SGE
- * @flagslength: SGE flags and data transfer length
- * @dma_addr: Physical address
- *
- * This routine places a MPT request frame back on the MPT adapter's
- * FreeQ.
- */
-static inline void
-mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
-{
- if (sizeof(dma_addr_t) == sizeof(u64)) {
- SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
- u32 tmp = dma_addr & 0xFFFFFFFF;
-
- pSge->FlagsLength = cpu_to_le32(flagslength);
- pSge->Address.Low = cpu_to_le32(tmp);
- tmp = (u32) ((u64)dma_addr >> 32);
- pSge->Address.High = cpu_to_le32(tmp);
-
- } else {
- SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
- pSge->FlagsLength = cpu_to_le32(flagslength);
- pSge->Address = cpu_to_le32(dma_addr);
- }
-} /* mptscsih_add_sge() */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_add_chain - Place a chain SGE at address pAddr.
- * @pAddr: virtual address for SGE
- * @next: nextChainOffset value (u32's)
- * @length: length of next SGL segment
- * @dma_addr: Physical address
- *
- * This routine places a MPT request frame back on the MPT adapter's
- * FreeQ.
- */
-static inline void
-mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
-{
- if (sizeof(dma_addr_t) == sizeof(u64)) {
- SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
- u32 tmp = dma_addr & 0xFFFFFFFF;
-
- pChain->Length = cpu_to_le16(length);
- pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-
- pChain->NextChainOffset = next;
+#define SNS_LEN(scp) SCSI_SENSE_BUFFERSIZE
- pChain->Address.Low = cpu_to_le32(tmp);
- tmp = (u32) ((u64)dma_addr >> 32);
- pChain->Address.High = cpu_to_le32(tmp);
- } else {
- SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
- pChain->Length = cpu_to_le16(length);
- pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
- pChain->NextChainOffset = next;
- pChain->Address = cpu_to_le32(dma_addr);
- }
-} /* mptscsih_add_chain() */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
int rc;
int chain_idx;
- dsgprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer called\n",
- ioc->name));
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n",
+ ioc->name));
spin_lock_irqsave(&ioc->FreeQlock, flags);
if (!list_empty(&ioc->FreeChainQ)) {
int offset;
offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
chain_idx = offset / ioc->req_sz;
rc = SUCCESS;
- dsgprintk((MYIOC_s_ERR_FMT "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
- ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
+ ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
} else {
rc = FAILED;
chain_idx = MPT_HOST_NO_CHAIN;
- dfailprintk((MYIOC_s_INFO_FMT "getFreeChainBuffer failed\n",
- ioc->name));
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
+ ioc->name));
}
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
/* Map the data portion, if any.
* sges_left = 0 if no data transfer.
*/
- if ( (sges_left = SCpnt->use_sg) ) {
- sges_left = pci_map_sg(ioc->pcidev,
- (struct scatterlist *) SCpnt->request_buffer,
- SCpnt->use_sg,
- SCpnt->sc_data_direction);
- if (sges_left == 0)
- return FAILED;
- } else if (SCpnt->request_bufflen) {
- SCpnt->SCp.dma_handle = pci_map_single(ioc->pcidev,
- SCpnt->request_buffer,
- SCpnt->request_bufflen,
- SCpnt->sc_data_direction);
- dsgprintk((MYIOC_s_INFO_FMT "SG: non-SG for %p, len=%d\n",
- ioc->name, SCpnt, SCpnt->request_bufflen));
- mptscsih_add_sge((char *) &pReq->SGL,
- 0xD1000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|SCpnt->request_bufflen,
- SCpnt->SCp.dma_handle);
-
- return SUCCESS;
- }
+ sges_left = scsi_dma_map(SCpnt);
+ if (sges_left < 0)
+ return FAILED;
/* Handle the SG case.
*/
- sg = (struct scatterlist *) SCpnt->request_buffer;
+ sg = scsi_sglist(SCpnt);
sg_done = 0;
sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
chainSge = NULL;
*/
nextSGEset:
- numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
+ numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
- sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;
+ sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
/* Get first (num - 1) SG elements
* Skip any SG entries with a length of 0
for (ii=0; ii < (numSgeThisFrame-1); ii++) {
thisxfer = sg_dma_len(sg);
if (thisxfer == 0) {
- sg ++; /* Get next SG element from the OS */
+ /* Get next SG element from the OS */
+ sg = sg_next(sg);
sg_done++;
continue;
}
v2 = sg_dma_address(sg);
- mptscsih_add_sge(psge, sgflags | thisxfer, v2);
+ ioc->add_sge(psge, sgflags | thisxfer, v2);
- sg++; /* Get next SG element from the OS */
- psge += (sizeof(u32) + sizeof(dma_addr_t));
- sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+ /* Get next SG element from the OS */
+ sg = sg_next(sg);
+ psge += ioc->SGE_size;
+ sgeOffset += ioc->SGE_size;
sg_done++;
}
thisxfer = sg_dma_len(sg);
v2 = sg_dma_address(sg);
- mptscsih_add_sge(psge, sgflags | thisxfer, v2);
- /*
- sg++;
- psge += (sizeof(u32) + sizeof(dma_addr_t));
- */
- sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+ ioc->add_sge(psge, sgflags | thisxfer, v2);
+ sgeOffset += ioc->SGE_size;
sg_done++;
if (chainSge) {
* Update the chain element
* Offset and Length fields.
*/
- mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+ ioc->add_chain((char *)chainSge, 0, sgeOffset,
+ ioc->ChainBufferDMA + chain_dma_off);
} else {
/* The current buffer is the original MF
* and there is no Chain buffer.
*/
pReq->ChainOffset = 0;
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
- dsgprintk((MYIOC_s_INFO_FMT
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
ioc->RequestNB[req_idx] = RequestNB;
}
* Loop until done.
*/
- dsgprintk((MYIOC_s_INFO_FMT "SG: Chain Required! sg done %d\n",
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n",
ioc->name, sg_done));
/* Set LAST_ELEMENT flag for last non-chain element
* set properly).
*/
if (sg_done) {
- u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
+ u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
sgflags = le32_to_cpu(*ptmp);
sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
*ptmp = cpu_to_le32(sgflags);
* Old chain element is now complete.
*/
u8 nextChain = (u8) (sgeOffset >> 2);
- sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
- mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+ sgeOffset += ioc->SGE_size;
+ ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
+ ioc->ChainBufferDMA + chain_dma_off);
} else {
/* The original MF buffer requires a chain buffer -
* set the offset.
*/
pReq->ChainOffset = (u8) (sgeOffset >> 2);
RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
- dsgprintk((MYIOC_s_ERR_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
ioc->RequestNB[req_idx] = RequestNB;
}
* in current buffer. Get a chain buffer.
*/
if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
- dfailprintk((MYIOC_s_INFO_FMT
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
ioc->name, pReq->CDB[0], SCpnt));
return FAILED;
* out the Address and Flags fields.
*/
chainSge = (char *) psge;
- dsgprintk((KERN_INFO " Current buff @ %p (index 0x%x)",
- psge, req_idx));
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)",
+ ioc->name, psge, req_idx));
/* Start the SGE for the next buffer
*/
sgeOffset = 0;
sg_done = 0;
- dsgprintk((KERN_INFO " Chain buff @ %p (index 0x%x)\n",
- psge, chain_idx));
+ dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n",
+ ioc->name, psge, chain_idx));
/* Start the SGE for the next buffer
*/
return SUCCESS;
} /* mptscsih_AddSGE() */
+static void
+mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
+ U32 SlotStatus)
+{
+ MPT_FRAME_HDR *mf;
+ SEPRequest_t *SEPMsg;
+
+ if (ioc->bus_type != SAS)
+ return;
+
+ /* Not supported for hidden raid components
+ */
+ if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+ return;
+
+ if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
+ dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
+ ioc->name,__func__));
+ return;
+ }
+
+ SEPMsg = (SEPRequest_t *)mf;
+ SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
+ SEPMsg->Bus = vtarget->channel;
+ SEPMsg->TargetID = vtarget->id;
+ SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
+ SEPMsg->SlotStatus = SlotStatus;
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Sending SEP cmd=%x channel=%d id=%d\n",
+ ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
+ mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
+}
+
+#ifdef CONFIG_FUSION_LOGGING
+/**
+ * mptscsih_info_scsiio - debug print info on reply frame
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sc: original scsi cmnd pointer
+ * @pScsiReply: Pointer to MPT reply frame
+ *
+ * MPT_DEBUG_REPLY needs to be enabled to obtain this info
+ *
+ * Refer to lsi/mpi.h.
+ **/
+static void
+mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply)
+{
+ char *desc = NULL;
+ char *desc1 = NULL;
+ u16 ioc_status;
+ u8 skey, asc, ascq;
+
+ ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+
+ switch (ioc_status) {
+
+ case MPI_IOCSTATUS_SUCCESS:
+ desc = "success";
+ break;
+ case MPI_IOCSTATUS_SCSI_INVALID_BUS:
+ desc = "invalid bus";
+ break;
+ case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
+ desc = "invalid target_id";
+ break;
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
+ desc = "device not there";
+ break;
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
+ desc = "data overrun";
+ break;
+ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
+ desc = "data underrun";
+ break;
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:
+ desc = "I/O data error";
+ break;
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:
+ desc = "protocol error";
+ break;
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
+ desc = "task terminated";
+ break;
+ case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
+ desc = "residual mismatch";
+ break;
+ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
+ desc = "task management failed";
+ break;
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
+ desc = "IOC terminated";
+ break;
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
+ desc = "ext terminated";
+ break;
+ default:
+ desc = "";
+ break;
+ }
+
+ switch (pScsiReply->SCSIStatus)
+ {
+
+ case MPI_SCSI_STATUS_SUCCESS:
+ desc1 = "success";
+ break;
+ case MPI_SCSI_STATUS_CHECK_CONDITION:
+ desc1 = "check condition";
+ break;
+ case MPI_SCSI_STATUS_CONDITION_MET:
+ desc1 = "condition met";
+ break;
+ case MPI_SCSI_STATUS_BUSY:
+ desc1 = "busy";
+ break;
+ case MPI_SCSI_STATUS_INTERMEDIATE:
+ desc1 = "intermediate";
+ break;
+ case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET:
+ desc1 = "intermediate condmet";
+ break;
+ case MPI_SCSI_STATUS_RESERVATION_CONFLICT:
+ desc1 = "reservation conflict";
+ break;
+ case MPI_SCSI_STATUS_COMMAND_TERMINATED:
+ desc1 = "command terminated";
+ break;
+ case MPI_SCSI_STATUS_TASK_SET_FULL:
+ desc1 = "task set full";
+ break;
+ case MPI_SCSI_STATUS_ACA_ACTIVE:
+ desc1 = "aca active";
+ break;
+ case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT:
+ desc1 = "fcpext device logged out";
+ break;
+ case MPI_SCSI_STATUS_FCPEXT_NO_LINK:
+ desc1 = "fcpext no link";
+ break;
+ case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED:
+ desc1 = "fcpext unassigned";
+ break;
+ default:
+ desc1 = "";
+ break;
+ }
+
+ scsi_print_command(sc);
+ printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %d\n",
+ ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
+ printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
+ "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
+ scsi_get_resid(sc));
+ printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
+ "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
+ le32_to_cpu(pScsiReply->TransferCount), sc->result);
+
+ printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
+ "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
+ ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
+ pScsiReply->SCSIState);
+
+ if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
+ skey = sc->sense_buffer[2] & 0x0F;
+ asc = sc->sense_buffer[12];
+ ascq = sc->sense_buffer[13];
+
+ printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: "
+ "[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq);
+ }
+
+ /*
+ * Look for + dump FCP ResponseInfo[]!
+ */
+ if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
+ pScsiReply->ResponseInfo)
+ printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n",
+ ioc->name, le32_to_cpu(pScsiReply->ResponseInfo));
+}
+#endif
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptscsih_io_done - Main SCSI IO callback routine registered to
MPT_SCSI_HOST *hd;
SCSIIORequest_t *pScsiReq;
SCSIIOReply_t *pScsiReply;
- u16 req_idx;
-
- hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
+ u16 req_idx, req_idx_MR;
+ VirtDevice *vdevice;
+ VirtTarget *vtarget;
+ hd = shost_priv(ioc->sh);
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- sc = hd->ScsiLookup[req_idx];
+ req_idx_MR = (mr != NULL) ?
+ le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
+
+ /* Special case, where already freed message frame is received from
+ * Firmware. It happens with Resetting IOC.
+ * Return immediately. Do not care
+ */
+ if ((req_idx != req_idx_MR) ||
+ (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
+ return 0;
+
+ sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
if (sc == NULL) {
MPIHeader_t *hdr = (MPIHeader_t *)mf;
return 1;
}
+ if ((unsigned char *)mf != sc->host_scribble) {
+ mptscsih_freeChainBuffers(ioc, req_idx);
+ return 1;
+ }
+
+ if (ioc->bus_type == SAS) {
+ VirtDevice *vdevice = sc->device->hostdata;
+
+ if (!vdevice || !vdevice->vtarget ||
+ vdevice->vtarget->deleted) {
+ sc->result = DID_NO_CONNECT << 16;
+ goto out;
+ }
+ }
+
+ sc->host_scribble = NULL;
sc->result = DID_OK << 16; /* Set default reply as OK */
pScsiReq = (SCSIIORequest_t *) mf;
pScsiReply = (SCSIIOReply_t *) mr;
if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
- dmfprintk((MYIOC_s_INFO_FMT
+ dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
}else{
- dmfprintk((MYIOC_s_INFO_FMT
+ dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
ioc->name, mf, mr, sc, req_idx));
}
u32 xfer_cnt;
u16 status;
u8 scsi_state, scsi_status;
+ u32 log_info;
status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
scsi_state = pScsiReply->SCSIState;
scsi_status = pScsiReply->SCSIStatus;
xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
- sc->resid = sc->request_bufflen - xfer_cnt;
+ scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
+ log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
/*
* if we get a data underrun indication, yet no data was
status = MPI_IOCSTATUS_SUCCESS;
}
- dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n"
- "IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n"
- "resid=%d bufflen=%d xfer_cnt=%d\n",
- ioc->id, sc->device->id, sc->device->lun,
- status, scsi_state, scsi_status, sc->resid,
- sc->request_bufflen, xfer_cnt));
-
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
*/
if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
pScsiReply->ResponseInfo) {
- printk(KERN_NOTICE "ha=%d id=%d lun=%d: "
- "FCP_ResponseInfo=%08xh\n",
- ioc->id, sc->device->id, sc->device->lun,
+ printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%d] "
+ "FCP_ResponseInfo=%08xh\n", ioc->name,
+ sc->device->host->host_no, sc->device->channel,
+ sc->device->id, sc->device->lun,
le32_to_cpu(pScsiReply->ResponseInfo));
}
switch(status) {
case MPI_IOCSTATUS_BUSY: /* 0x0002 */
+ case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
/* CHECKME!
* Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
* But not: DID_BUS_BUSY lest one risk
case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
/* Spoof to SCSI Selection Timeout! */
- sc->result = DID_NO_CONNECT << 16;
+ if (ioc->bus_type != FC)
+ sc->result = DID_NO_CONNECT << 16;
+ /* else fibre, just stall until rescan event */
+ else
+ sc->result = DID_REQUEUE << 16;
if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
hd->sel_timeout[pScsiReq->TargetID]++;
+
+ vdevice = sc->device->hostdata;
+ if (!vdevice)
+ break;
+ vtarget = vdevice->vtarget;
+ if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
+ mptscsih_issue_sep_command(ioc, vtarget,
+ MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
+ vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON;
+ }
break;
- case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
- case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ if ( ioc->bus_type == SAS ) {
+ u16 ioc_status = le16_to_cpu(pScsiReply->IOCStatus);
+ if (ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
+ if ((log_info & SAS_LOGINFO_MASK)
+ == SAS_LOGINFO_NEXUS_LOSS) {
+ sc->result = (DID_BUS_BUSY << 16);
+ break;
+ }
+ }
+ } else if (ioc->bus_type == FC) {
+ /*
+ * The FC IOC may kill a request for variety of
+ * reasons, some of which may be recovered by a
+ * retry, some which are unlikely to be
+ * recovered. Return DID_ERROR instead of
+ * DID_RESET to permit retry of the command,
+ * just not an infinite number of them
+ */
+ sc->result = DID_ERROR << 16;
+ break;
+ }
+
+ /*
+ * Allow non-SAS & non-NEXUS_LOSS to drop into below code
+ */
+
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
/* Linux handles an unsolicited DID_RESET better
* than an unsolicited DID_ABORT.
*/
sc->result = DID_RESET << 16;
- /* GEM Workaround. */
- if (ioc->bus_type == SPI)
- mptscsih_no_negotiate(hd, sc);
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ if (ioc->bus_type == FC)
+ sc->result = DID_ERROR << 16;
+ else
+ sc->result = DID_RESET << 16;
break;
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
- sc->resid = sc->request_bufflen - xfer_cnt;
+ scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
sc->result=DID_SOFT_ERROR << 16;
else /* Sufficient data transfer occurred */
sc->result = (DID_OK << 16) | scsi_status;
- dreplyprintk((KERN_NOTICE
- "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->device->id));
+ dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
+ ioc->name, sc->result, sc->device->channel, sc->device->id));
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
* precedence!
*/
sc->result = (DID_OK << 16) | scsi_status;
- if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
- /* Have already saved the status and sense data
+ if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
+
+ /*
+ * For an Errata on LSI53C1030
+ * When the length of request data
+ * and transfer data are different
+ * with result of command (READ or VERIFY),
+ * DID_SOFT_ERROR is set.
*/
- ;
- } else {
+ if (ioc->bus_type == SPI) {
+ if (pScsiReq->CDB[0] == READ_6 ||
+ pScsiReq->CDB[0] == READ_10 ||
+ pScsiReq->CDB[0] == READ_12 ||
+ pScsiReq->CDB[0] == READ_16 ||
+ pScsiReq->CDB[0] == VERIFY ||
+ pScsiReq->CDB[0] == VERIFY_16) {
+ if (scsi_bufflen(sc) !=
+ xfer_cnt) {
+ sc->result =
+ DID_SOFT_ERROR << 16;
+ printk(KERN_WARNING "Errata"
+ "on LSI53C1030 occurred."
+ "sc->req_bufflen=0x%02x,"
+ "xfer_cnt=0x%02x\n",
+ scsi_bufflen(sc),
+ xfer_cnt);
+ }
+ }
+ }
+
if (xfer_cnt < sc->underflow) {
if (scsi_status == SAM_STAT_BUSY)
sc->result = SAM_STAT_BUSY;
}
}
- dreplyprintk((KERN_NOTICE " sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
- sc->underflow));
- dreplyprintk((KERN_NOTICE " ActBytesXferd=%02xh\n", xfer_cnt));
+
+ dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ " sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
+ ioc->name, sc->underflow));
+ dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ " ActBytesXferd=%02xh\n", ioc->name, xfer_cnt));
+
/* Report Queue Full
*/
if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
break;
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ scsi_set_resid(sc, 0);
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
- if (scsi_status == MPI_SCSI_STATUS_BUSY)
- sc->result = (DID_BUS_BUSY << 16) | scsi_status;
- else
- sc->result = (DID_OK << 16) | scsi_status;
+ sc->result = (DID_OK << 16) | scsi_status;
if (scsi_state == 0) {
;
- } else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
+ } else if (scsi_state &
+ MPI_SCSI_STATE_AUTOSENSE_VALID) {
+
+ /*
+ * For potential trouble on LSI53C1030.
+ * (date:2007.xx.)
+ * It is checked whether the length of
+ * request data is equal to
+ * the length of transfer and residual.
+ * MEDIUM_ERROR is set by incorrect data.
+ */
+ if ((ioc->bus_type == SPI) &&
+ (sc->sense_buffer[2] & 0x20)) {
+ u32 difftransfer;
+ difftransfer =
+ sc->sense_buffer[3] << 24 |
+ sc->sense_buffer[4] << 16 |
+ sc->sense_buffer[5] << 8 |
+ sc->sense_buffer[6];
+ if (((sc->sense_buffer[3] & 0x80) ==
+ 0x80) && (scsi_bufflen(sc)
+ != xfer_cnt)) {
+ sc->sense_buffer[2] =
+ MEDIUM_ERROR;
+ sc->sense_buffer[12] = 0xff;
+ sc->sense_buffer[13] = 0xff;
+ printk(KERN_WARNING"Errata"
+ "on LSI53C1030 occurred."
+ "sc->req_bufflen=0x%02x,"
+ "xfer_cnt=0x%02x\n" ,
+ scsi_bufflen(sc),
+ xfer_cnt);
+ }
+ if (((sc->sense_buffer[3] & 0x80)
+ != 0x80) &&
+ (scsi_bufflen(sc) !=
+ xfer_cnt + difftransfer)) {
+ sc->sense_buffer[2] =
+ MEDIUM_ERROR;
+ sc->sense_buffer[12] = 0xff;
+ sc->sense_buffer[13] = 0xff;
+ printk(KERN_WARNING
+ "Errata on LSI53C1030 occurred"
+ "sc->req_bufflen=0x%02x,"
+ " xfer_cnt=0x%02x,"
+ "difftransfer=0x%02x\n",
+ scsi_bufflen(sc),
+ xfer_cnt,
+ difftransfer);
+ }
+ }
+
/*
* If running against circa 200003dd 909 MPT f/w,
* may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
- case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
- case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
default:
} /* switch(status) */
- dreplyprintk((KERN_NOTICE " sc->result is %08xh\n", sc->result));
- } /* end of address reply case */
+#ifdef CONFIG_FUSION_LOGGING
+ if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY))
+ mptscsih_info_scsiio(ioc, sc, pScsiReply);
+#endif
+ } /* end of address reply case */
+out:
/* Unmap the DMA buffers, if any. */
- if (sc->use_sg) {
- pci_unmap_sg(ioc->pcidev, (struct scatterlist *) sc->request_buffer,
- sc->use_sg, sc->sc_data_direction);
- } else if (sc->request_bufflen) {
- pci_unmap_single(ioc->pcidev, sc->SCp.dma_handle,
- sc->request_bufflen, sc->sc_data_direction);
- }
-
- hd->ScsiLookup[req_idx] = NULL;
+ scsi_dma_unmap(sc);
sc->scsi_done(sc); /* Issue the command callback */
mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
{
MPT_ADAPTER *ioc = hd->ioc;
- struct scsi_cmnd *SCpnt;
- MPT_FRAME_HDR *mf;
+ struct scsi_cmnd *sc;
+ SCSIIORequest_t *mf = NULL;
int ii;
- int max = ioc->req_depth;
-
- dprintk((KERN_INFO MYNAM ": flush_ScsiLookup called\n"));
- for (ii= 0; ii < max; ii++) {
- if ((SCpnt = hd->ScsiLookup[ii]) != NULL) {
-
- /* Command found.
- */
+ int channel, id;
- /* Null ScsiLookup index
- */
- hd->ScsiLookup[ii] = NULL;
-
- mf = MPT_INDEX_2_MFPTR(ioc, ii);
- dmfprintk(( "flush: ScsiDone (mf=%p,sc=%p)\n",
- mf, SCpnt));
-
- /* Set status, free OS resources (SG DMA buffers)
- * Do OS callback
- * Free driver resources (chain, msg buffers)
- */
- if (SCpnt->use_sg) {
- pci_unmap_sg(ioc->pcidev,
- (struct scatterlist *) SCpnt->request_buffer,
- SCpnt->use_sg,
- SCpnt->sc_data_direction);
- } else if (SCpnt->request_bufflen) {
- pci_unmap_single(ioc->pcidev,
- SCpnt->SCp.dma_handle,
- SCpnt->request_bufflen,
- SCpnt->sc_data_direction);
- }
- SCpnt->result = DID_RESET << 16;
- SCpnt->host_scribble = NULL;
-
- /* Free Chain buffers */
- mptscsih_freeChainBuffers(ioc, ii);
-
- /* Free Message frames */
- mpt_free_msg_frame(ioc, mf);
-
- SCpnt->scsi_done(SCpnt); /* Issue the command callback */
- }
+ for (ii= 0; ii < ioc->req_depth; ii++) {
+ sc = mptscsih_getclear_scsi_lookup(ioc, ii);
+ if (!sc)
+ continue;
+ mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
+ if (!mf)
+ continue;
+ channel = mf->Bus;
+ id = mf->TargetID;
+ mptscsih_freeChainBuffers(ioc, ii);
+ mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
+ if ((unsigned char *)mf != sc->host_scribble)
+ continue;
+ scsi_dma_unmap(sc);
+ sc->result = DID_RESET << 16;
+ sc->host_scribble = NULL;
+ dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
+ "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
+ "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
+ sc->scsi_done(sc);
}
-
- return;
}
/*
* when a lun is disable by mid-layer.
* Do NOT access the referenced scsi_cmnd structure or
* members. Will cause either a paging or NULL ptr error.
+ * (BUT, BUT, BUT, the code does reference it! - mdr)
* @hd: Pointer to a SCSI HOST structure
* @vdevice: per device private data
*
{
SCSIIORequest_t *mf = NULL;
int ii;
- int max = hd->ioc->req_depth;
struct scsi_cmnd *sc;
+ struct scsi_lun lun;
+ MPT_ADAPTER *ioc = hd->ioc;
+ unsigned long flags;
- dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n",
- vdevice->target_id, vdevice->lun, max));
-
- for (ii=0; ii < max; ii++) {
- if ((sc = hd->ScsiLookup[ii]) != NULL) {
-
- mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii);
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ for (ii = 0; ii < ioc->req_depth; ii++) {
+ if ((sc = ioc->ScsiLookup[ii]) != NULL) {
- dsprintk(( "search_running: found (sc=%p, mf = %p) target %d, lun %d \n",
- hd->ScsiLookup[ii], mf, mf->TargetID, mf->LUN[1]));
+ mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
+ if (mf == NULL)
+ continue;
+ /* If the device is a hidden raid component, then its
+ * expected that the mf->function will be RAID_SCSI_IO
+ */
+ if (vdevice->vtarget->tflags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function !=
+ MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)
+ continue;
- if ((mf->TargetID != ((u8)vdevice->target_id)) || (mf->LUN[1] != ((u8) vdevice->lun)))
+ int_to_scsilun(vdevice->lun, &lun);
+ if ((mf->Bus != vdevice->vtarget->channel) ||
+ (mf->TargetID != vdevice->vtarget->id) ||
+ memcmp(lun.scsi_lun, mf->LUN, 8))
continue;
- /* Cleanup
- */
- hd->ScsiLookup[ii] = NULL;
- mptscsih_freeChainBuffers(hd->ioc, ii);
- mpt_free_msg_frame(hd->ioc, (MPT_FRAME_HDR *)mf);
- if (sc->use_sg) {
- pci_unmap_sg(hd->ioc->pcidev,
- (struct scatterlist *) sc->request_buffer,
- sc->use_sg,
- sc->sc_data_direction);
- } else if (sc->request_bufflen) {
- pci_unmap_single(hd->ioc->pcidev,
- sc->SCp.dma_handle,
- sc->request_bufflen,
- sc->sc_data_direction);
- }
+ if ((unsigned char *)mf != sc->host_scribble)
+ continue;
+ ioc->ScsiLookup[ii] = NULL;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ mptscsih_freeChainBuffers(ioc, ii);
+ mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
+ scsi_dma_unmap(sc);
sc->host_scribble = NULL;
sc->result = DID_NO_CONNECT << 16;
+ dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
+ MYIOC_s_FMT "completing cmds: fw_channel %d, "
+ "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
+ vdevice->vtarget->channel, vdevice->vtarget->id,
+ sc, mf, ii));
sc->scsi_done(sc);
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
}
}
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
return;
}
{
long time = jiffies;
MPT_SCSI_HOST *hd;
+ MPT_ADAPTER *ioc;
if (sc->device == NULL)
return;
if (sc->device->host == NULL)
return;
- if ((hd = (MPT_SCSI_HOST *)sc->device->host->hostdata) == NULL)
+ if ((hd = shost_priv(sc->device->host)) == NULL)
return;
-
+ ioc = hd->ioc;
if (time - hd->last_queue_full > 10 * HZ) {
- dprintk((MYIOC_s_WARN_FMT "Device (%d:%d:%d) reported QUEUE_FULL!\n",
- hd->ioc->name, 0, sc->device->id, sc->device->lun));
+ dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%d) reported QUEUE_FULL!\n",
+ ioc->name, 0, sc->device->id, sc->device->lun));
hd->last_queue_full = time;
}
}
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
struct Scsi_Host *host = ioc->sh;
MPT_SCSI_HOST *hd;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- int count;
- unsigned long flags;
-#endif
int sz1;
if(!host) {
scsi_remove_host(host);
- if((hd = (MPT_SCSI_HOST *)host->hostdata) == NULL)
+ if((hd = shost_priv(host)) == NULL)
return;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- /* Check DV thread active */
- count = 10 * HZ;
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- if (dvtaskQ_active) {
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- while(dvtaskQ_active && --count)
- schedule_timeout_interruptible(1);
- } else {
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- }
- if (!count)
- printk(KERN_ERR MYNAM ": ERROR - DV thread still active!\n");
-#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY)
- else
- printk(KERN_ERR MYNAM ": DV thread orig %d, count %d\n", 10 * HZ, count);
-#endif
-#endif
-
mptscsih_shutdown(pdev);
sz1=0;
- if (hd->ScsiLookup != NULL) {
- sz1 = hd->ioc->req_depth * sizeof(void *);
- kfree(hd->ScsiLookup);
- hd->ScsiLookup = NULL;
+ if (ioc->ScsiLookup != NULL) {
+ sz1 = ioc->req_depth * sizeof(void *);
+ kfree(ioc->ScsiLookup);
+ ioc->ScsiLookup = NULL;
}
- /*
- * Free pointer array.
- */
- kfree(hd->Targets);
- hd->Targets = NULL;
-
- dprintk((MYIOC_s_INFO_FMT
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Free'd ScsiLookup (%d) memory\n",
- hd->ioc->name, sz1));
+ ioc->name, sz1));
kfree(hd->info_kbuf);
/* NULL the Scsi_Host pointer
*/
- hd->ioc->sh = NULL;
+ ioc->sh = NULL;
scsi_host_put(host);
void
mptscsih_shutdown(struct pci_dev *pdev)
{
- MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
- struct Scsi_Host *host = ioc->sh;
- MPT_SCSI_HOST *hd;
-
- if(!host)
- return;
-
- hd = (MPT_SCSI_HOST *)host->hostdata;
-
}
#ifdef CONFIG_PM
int
mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+
+ scsi_block_requests(ioc->sh);
+ flush_scheduled_work();
mptscsih_shutdown(pdev);
return mpt_suspend(pdev,state);
}
mptscsih_resume(struct pci_dev *pdev)
{
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
- struct Scsi_Host *host = ioc->sh;
- MPT_SCSI_HOST *hd;
-
- mpt_resume(pdev);
-
- if(!host)
- return 0;
-
- hd = (MPT_SCSI_HOST *)host->hostdata;
- if(!hd)
- return 0;
+ int rc;
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- {
- unsigned long lflags;
- spin_lock_irqsave(&dvtaskQ_lock, lflags);
- if (!dvtaskQ_active) {
- dvtaskQ_active = 1;
- spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
- INIT_WORK(&dvTaskQ_task,
- mptscsih_domainValidation, (void *) hd);
- schedule_work(&dvTaskQ_task);
- } else {
- spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
- }
- }
-#endif
- return 0;
+ rc = mpt_resume(pdev);
+ scsi_unblock_requests(ioc->sh);
+ return rc;
}
#endif
MPT_SCSI_HOST *h;
int size = 0;
- h = (MPT_SCSI_HOST *)SChost->hostdata;
+ h = shost_priv(SChost);
if (h) {
if (h->info_kbuf == NULL)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_proc_info - Return information about MPT adapter
+ * @host: scsi host struct
+ * @buffer: if write, user data; if read, buffer for user
+ * @start: returns the buffer address
+ * @offset: if write, 0; if read, the current offset into the buffer from
+ * the previous read.
+ * @length: if write, return length;
+ * @func: write = 1; read = 0
*
* (linux scsi_host_template.info routine)
- *
- * buffer: if write, user data; if read, buffer for user
- * length: if write, return length;
- * offset: if write, 0; if read, the current offset into the buffer from
- * the previous read.
- * hostno: scsi host number
- * func: if write = 1; if read = 0
*/
int
mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
int length, int func)
{
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
+ MPT_SCSI_HOST *hd = shost_priv(host);
MPT_ADAPTER *ioc = hd->ioc;
int size = 0;
MPT_SCSI_HOST *hd;
MPT_FRAME_HDR *mf;
SCSIIORequest_t *pScsiReq;
- VirtDevice *vdev = SCpnt->device->hostdata;
- int lun;
+ VirtDevice *vdevice = SCpnt->device->hostdata;
u32 datalen;
u32 scsictl;
u32 scsidir;
u32 cmd_len;
int my_idx;
int ii;
+ MPT_ADAPTER *ioc;
- hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata;
- lun = SCpnt->device->lun;
+ hd = shost_priv(SCpnt->device->host);
+ ioc = hd->ioc;
SCpnt->scsi_done = done;
- dmfprintk((MYIOC_s_INFO_FMT "qcmd: SCpnt=%p, done()=%p\n",
- (hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt, done));
+ dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n",
+ ioc->name, SCpnt, done));
- if (hd->resetPending) {
- dtmprintk((MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
- (hd && hd->ioc) ? hd->ioc->name : "ioc?", SCpnt));
+ if (ioc->taskmgmt_quiesce_io) {
+ dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
+ ioc->name, SCpnt));
return SCSI_MLQUEUE_HOST_BUSY;
}
/*
* Put together a MPT SCSI request...
*/
- if ((mf = mpt_get_msg_frame(hd->ioc->DoneCtx, hd->ioc)) == NULL) {
- dprintk((MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
- hd->ioc->name));
+ if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
+ dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
+ ioc->name));
return SCSI_MLQUEUE_HOST_BUSY;
}
* will be no data transfer! GRRRRR...
*/
if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
- datalen = SCpnt->request_bufflen;
+ datalen = scsi_bufflen(SCpnt);
scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */
} else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
- datalen = SCpnt->request_bufflen;
+ datalen = scsi_bufflen(SCpnt);
scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */
} else {
datalen = 0;
/* Default to untagged. Once a target structure has been allocated,
* use the Inquiry data to determine if device supports tagged.
*/
- if (vdev
- && (vdev->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
+ if (vdevice
+ && (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
&& (SCpnt->device->tagged_supported)) {
scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
- } else {
+ if (SCpnt->request && SCpnt->request->ioprio) {
+ if (((SCpnt->request->ioprio & 0x7) == 1) ||
+ !(SCpnt->request->ioprio & 0x7))
+ scsictl |= MPI_SCSIIO_CONTROL_HEADOFQ;
+ }
+ } else
scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
- }
+
/* Use the above information to set up the message frame
*/
- pScsiReq->TargetID = (u8) vdev->target_id;
- pScsiReq->Bus = vdev->bus_id;
+ pScsiReq->TargetID = (u8) vdevice->vtarget->id;
+ pScsiReq->Bus = vdevice->vtarget->channel;
pScsiReq->ChainOffset = 0;
- pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
+ if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+ pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
+ else
+ pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
pScsiReq->CDBLength = SCpnt->cmd_len;
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
pScsiReq->Reserved = 0;
- pScsiReq->MsgFlags = mpt_msg_flags();
- pScsiReq->LUN[0] = 0;
- pScsiReq->LUN[1] = lun;
- pScsiReq->LUN[2] = 0;
- pScsiReq->LUN[3] = 0;
- pScsiReq->LUN[4] = 0;
- pScsiReq->LUN[5] = 0;
- pScsiReq->LUN[6] = 0;
- pScsiReq->LUN[7] = 0;
+ pScsiReq->MsgFlags = mpt_msg_flags(ioc);
+ int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
pScsiReq->Control = cpu_to_le32(scsictl);
/*
pScsiReq->DataLength = cpu_to_le32(datalen);
/* SenseBuffer low address */
- pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma
+ pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
+ (my_idx * MPT_SENSE_BUFFER_ALLOC));
/* Now add the SG list
*/
if (datalen == 0) {
/* Add a NULL SGE */
- mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
+ ioc->add_sge((char *)&pScsiReq->SGL,
+ MPT_SGE_FLAGS_SSIMPLE_READ | 0,
(dma_addr_t) -1);
} else {
/* Add a 32 or 64 bit SGE */
- if (mptscsih_AddSGE(hd->ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
+ if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
goto fail;
}
- hd->ScsiLookup[my_idx] = SCpnt;
- SCpnt->host_scribble = NULL;
-
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- if (hd->ioc->bus_type == SPI) {
- int dvStatus = hd->ioc->spi_data.dvStatus[vdev->target_id];
- int issueCmd = 1;
-
- if (dvStatus || hd->ioc->spi_data.forceDv) {
-
- if ((dvStatus & MPT_SCSICFG_NEED_DV) ||
- (hd->ioc->spi_data.forceDv & MPT_SCSICFG_NEED_DV)) {
- unsigned long lflags;
- /* Schedule DV if necessary */
- spin_lock_irqsave(&dvtaskQ_lock, lflags);
- if (!dvtaskQ_active) {
- dvtaskQ_active = 1;
- spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
- INIT_WORK(&dvTaskQ_task, mptscsih_domainValidation, (void *) hd);
-
- schedule_work(&dvTaskQ_task);
- } else {
- spin_unlock_irqrestore(&dvtaskQ_lock, lflags);
- }
- hd->ioc->spi_data.forceDv &= ~MPT_SCSICFG_NEED_DV;
- }
+ SCpnt->host_scribble = (unsigned char *)mf;
+ mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt);
- /* Trying to do DV to this target, extend timeout.
- * Wait to issue until flag is clear
- */
- if (dvStatus & MPT_SCSICFG_DV_PENDING) {
- mod_timer(&SCpnt->eh_timeout, jiffies + 40 * HZ);
- issueCmd = 0;
- }
-
- /* Set the DV flags.
- */
- if (dvStatus & MPT_SCSICFG_DV_NOT_DONE)
- mptscsih_set_dvflags(hd, SCpnt);
-
- if (!issueCmd)
- goto fail;
- }
- }
-#endif
-
- mpt_put_msg_frame(hd->ioc->DoneCtx, hd->ioc, mf);
- dmfprintk((MYIOC_s_INFO_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
- hd->ioc->name, SCpnt, mf, my_idx));
- DBG_DUMP_REQUEST_FRAME(mf)
- return 0;
+ mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
+ dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
+ ioc->name, SCpnt, mf, my_idx));
+ DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf);
+ return 0;
fail:
- hd->ScsiLookup[my_idx] = NULL;
- mptscsih_freeChainBuffers(hd->ioc, my_idx);
- mpt_free_msg_frame(hd->ioc, mf);
+ mptscsih_freeChainBuffers(ioc, my_idx);
+ mpt_free_msg_frame(ioc, mf);
return SCSI_MLQUEUE_HOST_BUSY;
}
list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- dmfprintk((MYIOC_s_INFO_FMT "FreeChainBuffers (index %d)\n",
+ dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n",
ioc->name, chain_idx));
/* handle next */
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mptscsih_TMHandler - Generic handler for SCSI Task Management.
- * Fall through to mpt_HardResetHandler if: not operational, too many
- * failed TM requests or handshake failure.
- *
- * @ioc: Pointer to MPT_ADAPTER structure
+/**
+ * mptscsih_IssueTaskMgmt - Generic send Task Management function.
+ * @hd: Pointer to MPT_SCSI_HOST structure
* @type: Task Management type
- * @target: Logical Target ID for reset (if appropriate)
+ * @channel: channel number for task management
+ * @id: Logical Target ID for reset (if appropriate)
* @lun: Logical Unit for reset (if appropriate)
* @ctx2abort: Context for the task to be aborted (if appropriate)
+ * @timeout: timeout for task management control
+ *
+ * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
+ * or a non-interrupt thread. In the former, must not call schedule().
*
- * Remark: Currently invoked from a non-interrupt thread (_bh).
+ * Not all fields are meaningfull for all task types.
*
- * Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
- * will be active.
+ * Returns 0 for SUCCESS, or FAILED.
*
- * Returns 0 for SUCCESS or -1 if FAILED.
- */
-static int
-mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout)
+ **/
+int
+mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun,
+ int ctx2abort, ulong timeout)
{
- MPT_ADAPTER *ioc;
- int rc = -1;
- int doTask = 1;
+ MPT_FRAME_HDR *mf;
+ SCSITaskMgmt_t *pScsiTm;
+ int ii;
+ int retval;
+ MPT_ADAPTER *ioc = hd->ioc;
+ unsigned long timeleft;
+ u8 issue_hard_reset;
u32 ioc_raw_state;
- unsigned long flags;
-
- /* If FW is being reloaded currently, return success to
- * the calling function.
- */
- if (hd == NULL)
- return 0;
-
- ioc = hd->ioc;
- if (ioc == NULL) {
- printk(KERN_ERR MYNAM " TMHandler" " NULL ioc!\n");
- return FAILED;
- }
- dtmprintk((MYIOC_s_INFO_FMT "TMHandler Entered!\n", ioc->name));
-
- // SJR - CHECKME - Can we avoid this here?
- // (mpt_HardResetHandler has this check...)
- spin_lock_irqsave(&ioc->diagLock, flags);
- if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) {
- spin_unlock_irqrestore(&ioc->diagLock, flags);
- return FAILED;
- }
- spin_unlock_irqrestore(&ioc->diagLock, flags);
-
- /* Wait a fixed amount of time for the TM pending flag to be cleared.
- * If we time out and not bus reset, then we return a FAILED status to the caller.
- * The call to mptscsih_tm_pending_wait() will set the pending flag if we are
- * successful. Otherwise, reload the FW.
- */
- if (mptscsih_tm_pending_wait(hd) == FAILED) {
- if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- dtmprintk((KERN_INFO MYNAM ": %s: TMHandler abort: "
- "Timed out waiting for last TM (%d) to complete! \n",
- hd->ioc->name, hd->tmPending));
- return FAILED;
- } else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
- dtmprintk((KERN_INFO MYNAM ": %s: TMHandler target reset: "
- "Timed out waiting for last TM (%d) to complete! \n",
- hd->ioc->name, hd->tmPending));
- return FAILED;
- } else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
- dtmprintk((KERN_INFO MYNAM ": %s: TMHandler bus reset: "
- "Timed out waiting for last TM (%d) to complete! \n",
- hd->ioc->name, hd->tmPending));
- if (hd->tmPending & (1 << MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS))
- return FAILED;
-
- doTask = 0;
- }
- } else {
- spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
- hd->tmPending |= (1 << type);
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- }
+ unsigned long time_count;
- /* Is operational?
- */
- ioc_raw_state = mpt_GetIocState(hd->ioc, 0);
+ issue_hard_reset = 0;
+ ioc_raw_state = mpt_GetIocState(ioc, 0);
-#ifdef MPT_DEBUG_RESET
if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
printk(MYIOC_s_WARN_FMT
- "TM Handler: IOC Not operational(0x%x)!\n",
- hd->ioc->name, ioc_raw_state);
+ "TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
+ ioc->name, type, ioc_raw_state);
+ printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
+ ioc->name, __func__);
+ if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
+ printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
+ "FAILED!!\n", ioc->name);
+ return 0;
}
-#endif
-
- if (doTask && ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL)
- && !(ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
- /* Isse the Task Mgmt request.
- */
- if (hd->hard_resets < -1)
- hd->hard_resets++;
- rc = mptscsih_IssueTaskMgmt(hd, type, channel, target, lun, ctx2abort, timeout);
- if (rc) {
- printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n", hd->ioc->name);
- } else {
- dtmprintk((MYIOC_s_INFO_FMT "Issue of TaskMgmt Successful!\n", hd->ioc->name));
- }
+ if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
+ printk(MYIOC_s_WARN_FMT
+ "TaskMgmt type=%x: ioc_state: "
+ "DOORBELL_ACTIVE (0x%x)!\n",
+ ioc->name, type, ioc_raw_state);
+ return FAILED;
}
- /* Only fall through to the HRH if this is a bus reset
- */
- if ((type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) && (rc ||
- ioc->reload_fw || (ioc->alt_ioc && ioc->alt_ioc->reload_fw))) {
- dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
- hd->ioc->name));
- rc = mpt_HardResetHandler(hd->ioc, CAN_SLEEP);
+ mutex_lock(&ioc->taskmgmt_cmds.mutex);
+ if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+ mf = NULL;
+ retval = FAILED;
+ goto out;
}
- dtmprintk((MYIOC_s_INFO_FMT "TMHandler rc = %d!\n", hd->ioc->name, rc));
-
- return rc;
-}
-
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mptscsih_IssueTaskMgmt - Generic send Task Management function.
- * @hd: Pointer to MPT_SCSI_HOST structure
- * @type: Task Management type
- * @target: Logical Target ID for reset (if appropriate)
- * @lun: Logical Unit for reset (if appropriate)
- * @ctx2abort: Context for the task to be aborted (if appropriate)
- *
- * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
- * or a non-interrupt thread. In the former, must not call schedule().
- *
- * Not all fields are meaningfull for all task types.
- *
- * Returns 0 for SUCCESS, -999 for "no msg frames",
- * else other non-zero value returned.
- */
-static int
-mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout)
-{
- MPT_FRAME_HDR *mf;
- SCSITaskMgmt_t *pScsiTm;
- int ii;
- int retval;
-
/* Return Fail to calling function if no message frames available.
*/
- if ((mf = mpt_get_msg_frame(hd->ioc->TaskCtx, hd->ioc)) == NULL) {
- dfailprintk((MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
- hd->ioc->name));
- return FAILED;
+ if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "TaskMgmt no msg frames!!\n", ioc->name));
+ retval = FAILED;
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ goto out;
}
- dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt request @ %p\n",
- hd->ioc->name, mf));
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+ ioc->name, mf));
/* Format the Request
*/
pScsiTm = (SCSITaskMgmt_t *) mf;
- pScsiTm->TargetID = target;
+ pScsiTm->TargetID = id;
pScsiTm->Bus = channel;
pScsiTm->ChainOffset = 0;
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
- for (ii= 0; ii < 8; ii++) {
- pScsiTm->LUN[ii] = 0;
- }
- pScsiTm->LUN[1] = lun;
+ int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
for (ii=0; ii < 7; ii++)
pScsiTm->Reserved2[ii] = 0;
pScsiTm->TaskMsgContext = ctx2abort;
- dtmprintk((MYIOC_s_INFO_FMT "IssueTaskMgmt: ctx2abort (0x%08x) type=%d\n",
- hd->ioc->name, ctx2abort, type));
-
- DBG_DUMP_TM_REQUEST_FRAME((u32 *)pScsiTm);
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
+ "task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
+ type, timeout));
+
+ DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
+
+ INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+ time_count = jiffies;
+ if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
+ (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
+ mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
+ else {
+ retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
+ sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
+ if (retval) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
+ ioc->name, mf, retval));
+ mpt_free_msg_frame(ioc, mf);
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ goto out;
+ }
+ }
- if ((retval = mpt_send_handshake_request(hd->ioc->TaskCtx, hd->ioc,
- sizeof(SCSITaskMgmt_t), (u32*)pScsiTm,
- CAN_SLEEP)) != 0) {
- dfailprintk((MYIOC_s_ERR_FMT "_send_handshake FAILED!"
- " (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
- hd->ioc, mf));
- mpt_free_msg_frame(hd->ioc, mf);
- return retval;
+ timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+ timeout*HZ);
+ if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ retval = FAILED;
+ dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ issue_hard_reset = 1;
+ goto out;
}
- if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
- dfailprintk((MYIOC_s_ERR_FMT "_wait_for_completion FAILED!"
- " (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
- hd->ioc, mf));
- mpt_free_msg_frame(hd->ioc, mf);
- dtmprintk((MYIOC_s_INFO_FMT "Calling HardReset! \n",
- hd->ioc->name));
- retval = mpt_HardResetHandler(hd->ioc, CAN_SLEEP);
+ retval = mptscsih_taskmgmt_reply(ioc, type,
+ (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt completed (%d seconds)\n",
+ ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
+
+ out:
+
+ CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+ if (issue_hard_reset) {
+ printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
}
+ retval = (retval == 0) ? 0 : FAILED;
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
return retval;
}
+EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
+
+static int
+mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
+{
+ switch (ioc->bus_type) {
+ case FC:
+ return 40;
+ case SAS:
+ case SPI:
+ default:
+ return 10;
+ }
+}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* (linux scsi_host_template.eh_abort_handler routine)
*
* Returns SUCCESS or FAILED.
- */
+ **/
int
mptscsih_abort(struct scsi_cmnd * SCpnt)
{
MPT_SCSI_HOST *hd;
- MPT_ADAPTER *ioc;
MPT_FRAME_HDR *mf;
u32 ctx2abort;
int scpnt_idx;
int retval;
- VirtDevice *vdev;
+ VirtDevice *vdevice;
+ ulong sn = SCpnt->serial_number;
+ MPT_ADAPTER *ioc;
/* If we can't locate our host adapter structure, return FAILED status.
*/
- if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) {
+ if ((hd = shost_priv(SCpnt->device->host)) == NULL) {
SCpnt->result = DID_RESET << 16;
SCpnt->scsi_done(SCpnt);
- dfailprintk((KERN_INFO MYNAM ": mptscsih_abort: "
- "Can't locate host! (sc=%p)\n",
- SCpnt));
+ printk(KERN_ERR MYNAM ": task abort: "
+ "can't locate host! (sc=%p)\n", SCpnt);
return FAILED;
}
ioc = hd->ioc;
- if (hd->resetPending) {
- return FAILED;
+ printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n",
+ ioc->name, SCpnt);
+ scsi_print_command(SCpnt);
+
+ vdevice = SCpnt->device->hostdata;
+ if (!vdevice || !vdevice->vtarget) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "task abort: device has been deleted (sc=%p)\n",
+ ioc->name, SCpnt));
+ SCpnt->result = DID_NO_CONNECT << 16;
+ SCpnt->scsi_done(SCpnt);
+ retval = 0;
+ goto out;
}
- if (hd->timeouts < -1)
- hd->timeouts++;
+ /* Task aborts are not supported for hidden raid components.
+ */
+ if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "task abort: hidden raid component (sc=%p)\n",
+ ioc->name, SCpnt));
+ SCpnt->result = DID_RESET << 16;
+ retval = FAILED;
+ goto out;
+ }
/* Find this command
*/
- if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
+ if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) {
/* Cmd not found in ScsiLookup.
* Do OS callback.
*/
SCpnt->result = DID_RESET << 16;
- dtmprintk((KERN_INFO MYNAM ": %s: mptscsih_abort: "
- "Command not in the active list! (sc=%p)\n",
- hd->ioc->name, SCpnt));
- return SUCCESS;
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
+ "Command not in the active list! (sc=%p)\n", ioc->name,
+ SCpnt));
+ retval = SUCCESS;
+ goto out;
}
- printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
- hd->ioc->name, SCpnt);
- scsi_print_command(SCpnt);
+ if (ioc->timeouts < -1)
+ ioc->timeouts++;
+
+ if (mpt_fwfault_debug)
+ mpt_halt_firmware(ioc);
/* Most important! Set TaskMsgContext to SCpnt's MsgContext!
* (the IO to be ABORT'd)
* swap it here either. It is an opaque cookie to
* the controller, so it does not matter. -DaveM
*/
- mf = MPT_INDEX_2_MFPTR(hd->ioc, scpnt_idx);
+ mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx);
ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
+ retval = mptscsih_IssueTaskMgmt(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+ vdevice->vtarget->channel,
+ vdevice->vtarget->id, vdevice->lun,
+ ctx2abort, mptscsih_get_tm_timeout(ioc));
+
+ if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx &&
+ SCpnt->serial_number == sn) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "task abort: command still in active list! (sc=%p)\n",
+ ioc->name, SCpnt));
+ retval = FAILED;
+ } else {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "task abort: command cleared from active list! (sc=%p)\n",
+ ioc->name, SCpnt));
+ retval = SUCCESS;
+ }
- hd->abortSCpnt = SCpnt;
-
- vdev = SCpnt->device->hostdata;
- retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
- vdev->bus_id, vdev->target_id, vdev->lun,
- ctx2abort, 2 /* 2 second timeout */);
-
- printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
- hd->ioc->name,
- ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
-
- if (retval == 0)
- return SUCCESS;
+ out:
+ printk(MYIOC_s_INFO_FMT "task abort: %s (sc=%p)\n",
+ ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), SCpnt);
- if(retval != FAILED ) {
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
- return FAILED;
+ return retval;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
* (linux scsi_host_template.eh_dev_reset_handler routine)
*
* Returns SUCCESS or FAILED.
- */
+ **/
int
mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
{
MPT_SCSI_HOST *hd;
int retval;
- VirtDevice *vdev;
+ VirtDevice *vdevice;
+ MPT_ADAPTER *ioc;
/* If we can't locate our host adapter structure, return FAILED status.
*/
- if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
- dtmprintk((KERN_INFO MYNAM ": mptscsih_dev_reset: "
- "Can't locate host! (sc=%p)\n",
- SCpnt));
+ if ((hd = shost_priv(SCpnt->device->host)) == NULL){
+ printk(KERN_ERR MYNAM ": target reset: "
+ "Can't locate host! (sc=%p)\n", SCpnt);
return FAILED;
}
- if (hd->resetPending)
- return FAILED;
-
- printk(KERN_WARNING MYNAM ": %s: attempting target reset! (sc=%p)\n",
- hd->ioc->name, SCpnt);
+ ioc = hd->ioc;
+ printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n",
+ ioc->name, SCpnt);
scsi_print_command(SCpnt);
- vdev = SCpnt->device->hostdata;
- retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
- vdev->bus_id, vdev->target_id,
- 0, 0, 5 /* 5 second timeout */);
+ vdevice = SCpnt->device->hostdata;
+ if (!vdevice || !vdevice->vtarget) {
+ retval = SUCCESS;
+ goto out;
+ }
+
+ /* Target reset to hidden raid component is not supported
+ */
+ if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
+ retval = FAILED;
+ goto out;
+ }
+
+ retval = mptscsih_IssueTaskMgmt(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+ vdevice->vtarget->channel,
+ vdevice->vtarget->id, 0, 0,
+ mptscsih_get_tm_timeout(ioc));
- printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
- hd->ioc->name,
- ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+ out:
+ printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
+ ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
if (retval == 0)
return SUCCESS;
-
- if(retval != FAILED ) {
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
- return FAILED;
+ else
+ return FAILED;
}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant
* (linux scsi_host_template.eh_bus_reset_handler routine)
*
* Returns SUCCESS or FAILED.
- */
+ **/
int
mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
{
MPT_SCSI_HOST *hd;
int retval;
- VirtDevice *vdev;
+ VirtDevice *vdevice;
+ MPT_ADAPTER *ioc;
/* If we can't locate our host adapter structure, return FAILED status.
*/
- if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
- dtmprintk((KERN_INFO MYNAM ": mptscsih_bus_reset: "
- "Can't locate host! (sc=%p)\n",
- SCpnt ) );
+ if ((hd = shost_priv(SCpnt->device->host)) == NULL){
+ printk(KERN_ERR MYNAM ": bus reset: "
+ "Can't locate host! (sc=%p)\n", SCpnt);
return FAILED;
}
- printk(KERN_WARNING MYNAM ": %s: attempting bus reset! (sc=%p)\n",
- hd->ioc->name, SCpnt);
+ ioc = hd->ioc;
+ printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n",
+ ioc->name, SCpnt);
scsi_print_command(SCpnt);
- if (hd->timeouts < -1)
- hd->timeouts++;
+ if (ioc->timeouts < -1)
+ ioc->timeouts++;
- vdev = SCpnt->device->hostdata;
- retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
- vdev->bus_id, 0, 0, 0, 5 /* 5 second timeout */);
+ vdevice = SCpnt->device->hostdata;
+ if (!vdevice || !vdevice->vtarget)
+ return SUCCESS;
+ retval = mptscsih_IssueTaskMgmt(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+ vdevice->vtarget->channel, 0, 0, 0,
+ mptscsih_get_tm_timeout(ioc));
- printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
- hd->ioc->name,
- ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+ printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
+ ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
if (retval == 0)
return SUCCESS;
-
- if(retval != FAILED ) {
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
- return FAILED;
+ else
+ return FAILED;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mptscsih_host_reset - Perform a SCSI host adapter RESET!
- * new_eh variant
+ * mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
* @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
*
* (linux scsi_host_template.eh_host_reset_handler routine)
{
MPT_SCSI_HOST * hd;
int status = SUCCESS;
+ MPT_ADAPTER *ioc;
+ int retval;
/* If we can't locate the host to reset, then we failed. */
- if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
- dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
- "Can't locate host! (sc=%p)\n",
- SCpnt ) );
+ if ((hd = shost_priv(SCpnt->device->host)) == NULL){
+ printk(KERN_ERR MYNAM ": host reset: "
+ "Can't locate host! (sc=%p)\n", SCpnt);
return FAILED;
}
- printk(KERN_WARNING MYNAM ": %s: Attempting host reset! (sc=%p)\n",
- hd->ioc->name, SCpnt);
+ /* make sure we have no outstanding commands at this stage */
+ mptscsih_flush_running_cmds(hd);
+
+ ioc = hd->ioc;
+ printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
+ ioc->name, SCpnt);
/* If our attempts to reset the host failed, then return a failed
* status. The host will be taken off line by the SCSI mid-layer.
*/
- if (mpt_HardResetHandler(hd->ioc, CAN_SLEEP) < 0){
+ retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+ if (retval < 0)
status = FAILED;
- } else {
- /* Make sure TM pending is cleared and TM state is set to
- * NONE.
- */
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
+ else
+ status = SUCCESS;
- dtmprintk( ( KERN_INFO MYNAM ": mptscsih_host_reset: "
- "Status = %s\n",
- (status == SUCCESS) ? "SUCCESS" : "FAILED" ) );
+ printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
+ ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
return status;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_tm_pending_wait - wait for pending task management request to
- * complete.
- * @hd: Pointer to MPT host structure.
- *
- * Returns {SUCCESS,FAILED}.
- */
static int
-mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+ SCSITaskMgmtReply_t *pScsiTmReply)
{
- unsigned long flags;
- int loop_count = 4 * 10; /* Wait 10 seconds */
- int status = FAILED;
-
- do {
- spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
- if (hd->tmState == TM_STATE_NONE) {
- hd->tmState = TM_STATE_IN_PROGRESS;
- hd->tmPending = 1;
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- status = SUCCESS;
- break;
- }
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- msleep(250);
- } while (--loop_count);
+ u16 iocstatus;
+ u32 termination_count;
+ int retval;
- return status;
+ if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ retval = FAILED;
+ goto out;
+ }
+
+ DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
+
+ iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+ termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
+ "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
+ "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
+ pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
+ le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
+ termination_count));
+
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
+ pScsiTmReply->ResponseCode)
+ mptscsih_taskmgmt_response_code(ioc,
+ pScsiTmReply->ResponseCode);
+
+ if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
+ retval = 0;
+ goto out;
+ }
+
+ retval = FAILED;
+ if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
+ if (termination_count == 1)
+ retval = 0;
+ goto out;
+ }
+
+ if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+ iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
+ retval = 0;
+
+ out:
+ return retval;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_tm_wait_for_completion - wait for completion of TM task
- * @hd: Pointer to MPT host structure.
- *
- * Returns {SUCCESS,FAILED}.
- */
-static int
-mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
+void
+mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
{
- unsigned long flags;
- int loop_count = 4 * timeout;
- int status = FAILED;
-
- do {
- spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
- if(hd->tmPending == 0) {
- status = SUCCESS;
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- break;
- }
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- msleep_interruptible(250);
- } while (--loop_count);
+ char *desc;
- return status;
+ switch (response_code) {
+ case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
+ desc = "The task completed.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
+ desc = "The IOC received an invalid frame status.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
+ desc = "The task type is not supported.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_FAILED:
+ desc = "The requested task failed.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
+ desc = "The task completed successfully.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
+ desc = "The LUN request is invalid.";
+ break;
+ case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
+ desc = "The task is in the IOC queue and has not been sent to target.";
+ break;
+ default:
+ desc = "unknown";
+ break;
+ }
+ printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
+ ioc->name, response_code, desc);
}
+EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* load/init time via the mpt_register() API call.
*
* Returns 1 indicating alloc'd request frame ptr should be freed.
- */
+ **/
int
-mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
+ MPT_FRAME_HDR *mr)
{
- SCSITaskMgmtReply_t *pScsiTmReply;
- SCSITaskMgmt_t *pScsiTmReq;
- MPT_SCSI_HOST *hd;
- unsigned long flags;
- u16 iocstatus;
- u8 tmType;
-
- dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
- ioc->name, mf, mr));
- if (ioc->sh) {
- /* Depending on the thread, a timer is activated for
- * the TM request. Delete this timer on completion of TM.
- * Decrement count of outstanding TM requests.
- */
- hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
- } else {
- dtmprintk((MYIOC_s_WARN_FMT "TaskMgmt Complete: NULL Scsi Host Ptr\n",
- ioc->name));
- return 1;
- }
-
- if (mr == NULL) {
- dtmprintk((MYIOC_s_WARN_FMT "ERROR! TaskMgmt Reply: NULL Request %p\n",
- ioc->name, mf));
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
+
+ ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+
+ if (!mr)
+ goto out;
+
+ ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ memcpy(ioc->taskmgmt_cmds.reply, mr,
+ min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+ out:
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->taskmgmt_cmds.done);
return 1;
- } else {
- pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
- pScsiTmReq = (SCSITaskMgmt_t*)mf;
-
- /* Figure out if this was ABORT_TASK, TARGET_RESET, or BUS_RESET! */
- tmType = pScsiTmReq->TaskType;
-
- dtmprintk((MYIOC_s_WARN_FMT " TaskType = %d, TerminationCount=%d\n",
- ioc->name, tmType, le32_to_cpu(pScsiTmReply->TerminationCount)));
- DBG_DUMP_TM_REPLY_FRAME((u32 *)pScsiTmReply);
-
- iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
- dtmprintk((MYIOC_s_WARN_FMT " SCSI TaskMgmt (%d) IOCStatus=%04x IOCLogInfo=%08x\n",
- ioc->name, tmType, iocstatus, le32_to_cpu(pScsiTmReply->IOCLogInfo)));
- /* Error? (anything non-zero?) */
- if (iocstatus) {
-
- /* clear flags and continue.
- */
- if (tmType == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
- hd->abortSCpnt = NULL;
-
- /* If an internal command is present
- * or the TM failed - reload the FW.
- * FC FW may respond FAILED to an ABORT
- */
- if (tmType == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
- if ((hd->cmdPtr) ||
- (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED)) {
- if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0) {
- printk((KERN_WARNING
- " Firmware Reload FAILED!!\n"));
- }
- }
- }
- } else {
- dtmprintk((MYIOC_s_WARN_FMT " TaskMgmt SUCCESS\n", ioc->name));
-
- hd->abortSCpnt = NULL;
-
- }
}
-
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- hd->tmPending = 0;
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- hd->tmState = TM_STATE_NONE;
-
- return 1;
+ return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
geom[1] = sectors;
geom[2] = cylinders;
- dprintk((KERN_NOTICE
- ": bios_param: Id=%i Lun=%i Channel=%i CHS=%i/%i/%i\n",
- sdev->id, sdev->lun,sdev->channel,(int)cylinders,heads,sectors));
-
- return 0;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * OS entry point to allow host driver to alloc memory
- * for each scsi target. Called once per device the bus scan.
- * Return non-zero if allocation fails.
- */
-int
-mptscsih_target_alloc(struct scsi_target *starget)
-{
- VirtTarget *vtarget;
-
- vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
- if (!vtarget)
- return -ENOMEM;
- starget->hostdata = vtarget;
return 0;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * OS entry point to allow host driver to alloc memory
- * for each scsi device. Called once per device the bus scan.
- * Return non-zero if allocation fails.
+/* Search IOC page 3 to determine if this is hidden physical disk
+ *
*/
int
-mptscsih_slave_alloc(struct scsi_device *sdev)
+mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
- struct Scsi_Host *host = sdev->host;
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
- VirtTarget *vtarget;
- VirtDevice *vdev;
- struct scsi_target *starget;
-
- vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
- if (!vdev) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
- hd->ioc->name, sizeof(VirtDevice));
- return -ENOMEM;
+ struct inactive_raid_component_info *component_info;
+ int i, j;
+ RaidPhysDiskPage1_t *phys_disk;
+ int rc = 0;
+ int num_paths;
+
+ if (!ioc->raid_data.pIocPg3)
+ goto out;
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
+ (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
+ rc = 1;
+ goto out;
+ }
}
- vdev->ioc_id = hd->ioc->id;
- vdev->target_id = sdev->id;
- vdev->bus_id = sdev->channel;
- vdev->lun = sdev->lun;
- sdev->hostdata = vdev;
+ if (ioc->bus_type != SAS)
+ goto out;
- starget = scsi_target(sdev);
- vtarget = starget->hostdata;
- vdev->vtarget = vtarget;
-
- if (vtarget->num_luns == 0) {
- hd->Targets[sdev->id] = vtarget;
- vtarget->ioc_id = hd->ioc->id;
- vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
- vtarget->target_id = sdev->id;
- vtarget->bus_id = sdev->channel;
- if (hd->ioc->bus_type == SPI) {
- if (hd->ioc->raid_data.isRaid & (1 << sdev->id)) {
- vtarget->raidVolume = 1;
- ddvtprintk((KERN_INFO
- "RAID Volume @ id %d\n", sdev->id));
+ /*
+ * Check if dual path
+ */
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+ ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+ if (num_paths < 2)
+ continue;
+ phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+ (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+ if (!phys_disk)
+ continue;
+ if ((mpt_raid_phys_disk_pg1(ioc,
+ ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+ phys_disk))) {
+ kfree(phys_disk);
+ continue;
+ }
+ for (j = 0; j < num_paths; j++) {
+ if ((phys_disk->Path[j].Flags &
+ MPI_RAID_PHYSDISK1_FLAG_INVALID))
+ continue;
+ if ((phys_disk->Path[j].Flags &
+ MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+ continue;
+ if ((id == phys_disk->Path[j].PhysDiskID) &&
+ (channel == phys_disk->Path[j].PhysDiskBus)) {
+ rc = 1;
+ kfree(phys_disk);
+ goto out;
}
- } else {
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
}
+ kfree(phys_disk);
}
- vtarget->num_luns++;
- return 0;
-}
-/*
- * OS entry point to allow for host driver to free allocated memory
- * Called if no device present or device being unloaded
- */
-void
-mptscsih_target_destroy(struct scsi_target *starget)
+
+ /*
+ * Check inactive list for matching phys disks
+ */
+ if (list_empty(&ioc->raid_data.inactive_list))
+ goto out;
+
+ mutex_lock(&ioc->raid_data.inactive_list_mutex);
+ list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
+ list) {
+ if ((component_info->d.PhysDiskID == id) &&
+ (component_info->d.PhysDiskBus == channel))
+ rc = 1;
+ }
+ mutex_unlock(&ioc->raid_data.inactive_list_mutex);
+
+ out:
+ return rc;
+}
+EXPORT_SYMBOL(mptscsih_is_phys_disk);
+
+u8
+mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
- if (starget->hostdata)
- kfree(starget->hostdata);
- starget->hostdata = NULL;
+ struct inactive_raid_component_info *component_info;
+ int i, j;
+ RaidPhysDiskPage1_t *phys_disk;
+ int rc = -ENXIO;
+ int num_paths;
+
+ if (!ioc->raid_data.pIocPg3)
+ goto out;
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
+ (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
+ rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
+ goto out;
+ }
+ }
+
+ if (ioc->bus_type != SAS)
+ goto out;
+
+ /*
+ * Check if dual path
+ */
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+ ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+ if (num_paths < 2)
+ continue;
+ phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+ (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+ if (!phys_disk)
+ continue;
+ if ((mpt_raid_phys_disk_pg1(ioc,
+ ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+ phys_disk))) {
+ kfree(phys_disk);
+ continue;
+ }
+ for (j = 0; j < num_paths; j++) {
+ if ((phys_disk->Path[j].Flags &
+ MPI_RAID_PHYSDISK1_FLAG_INVALID))
+ continue;
+ if ((phys_disk->Path[j].Flags &
+ MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+ continue;
+ if ((id == phys_disk->Path[j].PhysDiskID) &&
+ (channel == phys_disk->Path[j].PhysDiskBus)) {
+ rc = phys_disk->PhysDiskNum;
+ kfree(phys_disk);
+ goto out;
+ }
+ }
+ kfree(phys_disk);
+ }
+
+ /*
+ * Check inactive list for matching phys disks
+ */
+ if (list_empty(&ioc->raid_data.inactive_list))
+ goto out;
+
+ mutex_lock(&ioc->raid_data.inactive_list_mutex);
+ list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
+ list) {
+ if ((component_info->d.PhysDiskID == id) &&
+ (component_info->d.PhysDiskBus == channel))
+ rc = component_info->d.PhysDiskNum;
+ }
+ mutex_unlock(&ioc->raid_data.inactive_list_mutex);
+
+ out:
+ return rc;
}
+EXPORT_SYMBOL(mptscsih_raid_id_to_num);
/*
* OS entry point to allow for host driver to free allocated memory
mptscsih_slave_destroy(struct scsi_device *sdev)
{
struct Scsi_Host *host = sdev->host;
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
+ MPT_SCSI_HOST *hd = shost_priv(host);
VirtTarget *vtarget;
VirtDevice *vdevice;
struct scsi_target *starget;
vdevice = sdev->hostdata;
mptscsih_search_running_cmds(hd, vdevice);
- vtarget->luns[0] &= ~(1 << vdevice->lun);
vtarget->num_luns--;
- if (vtarget->num_luns == 0) {
- mptscsih_negotiate_to_asyn_narrow(hd, vtarget);
- if (hd->ioc->bus_type == SPI) {
- if (mptscsih_is_phys_disk(hd->ioc, vtarget->target_id)) {
- hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
- } else {
- hd->ioc->spi_data.dvStatus[vtarget->target_id] =
- MPT_SCSICFG_NEGOTIATE;
- if (!hd->negoNvram) {
- hd->ioc->spi_data.dvStatus[vtarget->target_id] |=
- MPT_SCSICFG_DV_NOT_DONE;
- }
- }
- }
- hd->Targets[sdev->id] = NULL;
- }
mptscsih_synchronize_cache(hd, vdevice);
kfree(vdevice);
sdev->hostdata = NULL;
* mptscsih_change_queue_depth - This function will set a devices queue depth
* @sdev: per scsi_device pointer
* @qdepth: requested queue depth
+ * @reason: calling context
*
* Adding support for new 'change_queue_depth' api.
*/
int
-mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sdev->host->hostdata;
+ MPT_SCSI_HOST *hd = shost_priv(sdev->host);
VirtTarget *vtarget;
struct scsi_target *starget;
int max_depth;
int tagged;
+ MPT_ADAPTER *ioc = hd->ioc;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
- if (hd->ioc->bus_type == SPI) {
- if (vtarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY) {
- if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
- max_depth = 1;
- else if (((vtarget->inq_data[0] & 0x1f) == 0x00) &&
- (vtarget->minSyncFactor <= MPT_ULTRA160 ))
- max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
- else
- max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
- } else {
- /* error case - No Inq. Data */
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
+ if (ioc->bus_type == SPI) {
+ if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
max_depth = 1;
- }
+ else if (sdev->type == TYPE_DISK &&
+ vtarget->minSyncFactor <= MPT_ULTRA160)
+ max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
+ else
+ max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
} else
- max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
+ max_depth = ioc->sh->can_queue;
+
+ if (!sdev->tagged_supported)
+ max_depth = 1;
if (qdepth > max_depth)
qdepth = max_depth;
VirtTarget *vtarget;
VirtDevice *vdevice;
struct scsi_target *starget;
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)sh->hostdata;
- int indexed_lun, lun_index;
+ MPT_SCSI_HOST *hd = shost_priv(sh);
+ MPT_ADAPTER *ioc = hd->ioc;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
vdevice = sdev->hostdata;
- dsprintk((MYIOC_s_INFO_FMT
- "device @ %p, id=%d, LUN=%d, channel=%d\n",
- hd->ioc->name, sdev, sdev->id, sdev->lun, sdev->channel));
- if (hd->ioc->bus_type == SPI)
- dsprintk((MYIOC_s_INFO_FMT
+ dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "device @ %p, channel=%d, id=%d, lun=%d\n",
+ ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
+ if (ioc->bus_type == SPI)
+ dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"sdtr %d wdtr %d ppr %d inq length=%d\n",
- hd->ioc->name, sdev->sdtr, sdev->wdtr,
+ ioc->name, sdev->sdtr, sdev->wdtr,
sdev->ppr, sdev->inquiry_len));
- if (sdev->id > sh->max_id) {
- /* error case, should never happen */
- scsi_adjust_queue_depth(sdev, 0, 1);
- goto slave_configure_exit;
- }
-
- vdevice->configured_lun=1;
- lun_index = (vdevice->lun >> 5); /* 32 luns per lun_index */
- indexed_lun = (vdevice->lun % 32);
- vtarget->luns[lun_index] |= (1 << indexed_lun);
- mptscsih_initTarget(hd, vtarget, sdev->lun, sdev->inquiry,
- sdev->inquiry_len );
- mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
+ vdevice->configured_lun = 1;
- dsprintk((MYIOC_s_INFO_FMT
+ dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Queue depth=%d, tflags=%x\n",
- hd->ioc->name, sdev->queue_depth, vtarget->tflags));
+ ioc->name, sdev->queue_depth, vtarget->tflags));
- if (hd->ioc->bus_type == SPI)
- dsprintk((MYIOC_s_INFO_FMT
+ if (ioc->bus_type == SPI)
+ dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
- hd->ioc->name, vtarget->negoFlags, vtarget->maxOffset,
+ ioc->name, vtarget->negoFlags, vtarget->maxOffset,
vtarget->minSyncFactor));
-slave_configure_exit:
-
- dsprintk((MYIOC_s_INFO_FMT
+ mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH,
+ SCSI_QDEPTH_DEFAULT);
+ dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"tagged %d, simple %d, ordered %d\n",
- hd->ioc->name,sdev->tagged_supported, sdev->simple_tags,
+ ioc->name,sdev->tagged_supported, sdev->simple_tags,
sdev->ordered_tags));
return 0;
static void
mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
{
- VirtDevice *vdev;
+ VirtDevice *vdevice;
SCSIIORequest_t *pReq;
u32 sense_count = le32_to_cpu(pScsiReply->SenseCount);
+ MPT_ADAPTER *ioc = hd->ioc;
/* Get target structure
*/
pReq = (SCSIIORequest_t *) mf;
- vdev = sc->device->hostdata;
+ vdevice = sc->device->hostdata;
if (sense_count) {
u8 *sense_data;
/* Copy the sense received into the scsi command block. */
req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- sense_data = ((u8 *)hd->ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
+ sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
memcpy(sc->sense_buffer, sense_data, SNS_LEN(sc));
/* Log SMART data (asc = 0x5D, non-IM case only) if required.
*/
- if ((hd->ioc->events) && (hd->ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
- if ((sense_data[12] == 0x5D) && (vdev->vtarget->raidVolume == 0)) {
+ if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
+ if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) {
int idx;
- MPT_ADAPTER *ioc = hd->ioc;
- idx = ioc->eventContext % ioc->eventLogSize;
+ idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
ioc->events[idx].eventContext = ioc->eventContext;
- ioc->events[idx].data[0] = (pReq->LUN[1] << 24) ||
- (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) ||
- (sc->device->channel << 8) || sc->device->id;
+ ioc->events[idx].data[0] = (pReq->LUN[1] << 24) |
+ (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) |
+ (sc->device->channel << 8) | sc->device->id;
- ioc->events[idx].data[1] = (sense_data[13] << 8) || sense_data[12];
+ ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12];
ioc->eventContext++;
+ if (ioc->pcidev->vendor ==
+ PCI_VENDOR_ID_IBM) {
+ mptscsih_issue_sep_command(ioc,
+ vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
+ vdevice->vtarget->tflags |=
+ MPT_TARGET_FLAGS_LED_ON;
+ }
}
}
} else {
- dprintk((MYIOC_s_INFO_FMT "Hmmm... SenseData len=0! (?)\n",
- hd->ioc->name));
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n",
+ ioc->name));
}
}
-static u32
-SCPNT_TO_LOOKUP_IDX(struct scsi_cmnd *sc)
+/**
+ * mptscsih_get_scsi_lookup - retrieves scmd entry
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @i: index into the array
+ *
+ * Returns the scsi_cmd pointer
+ */
+struct scsi_cmnd *
+mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
{
- MPT_SCSI_HOST *hd;
- int i;
-
- hd = (MPT_SCSI_HOST *) sc->device->host->hostdata;
+ unsigned long flags;
+ struct scsi_cmnd *scmd;
- for (i = 0; i < hd->ioc->req_depth; i++) {
- if (hd->ScsiLookup[i] == sc) {
- return i;
- }
- }
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ scmd = ioc->ScsiLookup[i];
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return -1;
+ return scmd;
}
+EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-int
-mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+/**
+ * mptscsih_getclear_scsi_lookup - retrieves and clears scmd entry from ScsiLookup[] array list
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @i: index into the array
+ *
+ * Returns the scsi_cmd pointer
+ *
+ **/
+static struct scsi_cmnd *
+mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
{
- MPT_SCSI_HOST *hd;
- unsigned long flags;
- int ii;
+ unsigned long flags;
+ struct scsi_cmnd *scmd;
- dtmprintk((KERN_WARNING MYNAM
- ": IOC %s_reset routed to SCSI host driver!\n",
- reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
- reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ scmd = ioc->ScsiLookup[i];
+ ioc->ScsiLookup[i] = NULL;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- /* If a FW reload request arrives after base installed but
- * before all scsi hosts have been attached, then an alt_ioc
- * may have a NULL sh pointer.
- */
- if ((ioc->sh == NULL) || (ioc->sh->hostdata == NULL))
- return 0;
- else
- hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
-
- if (reset_phase == MPT_IOC_SETUP_RESET) {
- dtmprintk((MYIOC_s_WARN_FMT "Setup-Diag Reset\n", ioc->name));
-
- /* Clean Up:
- * 1. Set Hard Reset Pending Flag
- * All new commands go to doneQ
- */
- hd->resetPending = 1;
+ return scmd;
+}
- } else if (reset_phase == MPT_IOC_PRE_RESET) {
- dtmprintk((MYIOC_s_WARN_FMT "Pre-Diag Reset\n", ioc->name));
+/**
+ * mptscsih_set_scsi_lookup
+ *
+ * writes a scmd entry into the ScsiLookup[] array list
+ *
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @i: index into the array
+ * @scmd: scsi_cmnd pointer
+ *
+ **/
+static void
+mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd)
+{
+ unsigned long flags;
- /* 2. Flush running commands
- * Clean ScsiLookup (and associated memory)
- * AND clean mytaskQ
- */
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ ioc->ScsiLookup[i] = scmd;
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+}
- /* 2b. Reply to OS all known outstanding I/O commands.
- */
- mptscsih_flush_running_cmds(hd);
+/**
+ * SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sc: scsi_cmnd pointer
+ */
+static int
+SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc)
+{
+ unsigned long flags;
+ int i, index=-1;
- /* 2c. If there was an internal command that
- * has not completed, configuration or io request,
- * free these resources.
- */
- if (hd->cmdPtr) {
- del_timer(&hd->timer);
- mpt_free_msg_frame(ioc, hd->cmdPtr);
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ for (i = 0; i < ioc->req_depth; i++) {
+ if (ioc->ScsiLookup[i] == sc) {
+ index = i;
+ goto out;
}
+ }
- dtmprintk((MYIOC_s_WARN_FMT "Pre-Reset complete.\n", ioc->name));
-
- } else {
- dtmprintk((MYIOC_s_WARN_FMT "Post-Diag Reset\n", ioc->name));
-
- /* Once a FW reload begins, all new OS commands are
- * redirected to the doneQ w/ a reset status.
- * Init all control structures.
- */
-
- /* ScsiLookup initialization
- */
- for (ii=0; ii < hd->ioc->req_depth; ii++)
- hd->ScsiLookup[ii] = NULL;
-
- /* 2. Chain Buffer initialization
- */
-
- /* 4. Renegotiate to all devices, if SPI
- */
- if (ioc->bus_type == SPI) {
- dnegoprintk(("writeSDP1: ALL_IDS USE_NVRAM\n"));
- mptscsih_writeSDP1(hd, 0, 0, MPT_SCSICFG_ALL_IDS | MPT_SCSICFG_USE_NVRAM);
- }
+ out:
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return index;
+}
- /* 5. Enable new commands to be posted
- */
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- hd->tmPending = 0;
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- hd->resetPending = 0;
- hd->tmState = TM_STATE_NONE;
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+int
+mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+ MPT_SCSI_HOST *hd;
- /* 6. If there was an internal command,
- * wake this process up.
- */
- if (hd->cmdPtr) {
- /*
- * Wake up the original calling thread
- */
- hd->pLocal = &hd->localReply;
- hd->pLocal->completion = MPT_SCANDV_DID_RESET;
- hd->scandv_wait_done = 1;
- wake_up(&hd->scandv_waitq);
- hd->cmdPtr = NULL;
- }
+ if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
+ return 0;
- /* 7. Set flag to force DV and re-read IOC Page 3
- */
- if (ioc->bus_type == SPI) {
- ioc->spi_data.forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
- ddvtprintk(("Set reload IOC Pg3 Flag\n"));
+ hd = shost_priv(ioc->sh);
+ switch (reset_phase) {
+ case MPT_IOC_SETUP_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+ break;
+ case MPT_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+ mptscsih_flush_running_cmds(hd);
+ break;
+ case MPT_IOC_POST_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+ if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->internal_cmds.status |=
+ MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->internal_cmds.done);
}
-
- dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
-
+ break;
+ default:
+ break;
}
-
return 1; /* currently means nothing really */
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* work queue thread to clear the persitency table */
-static void
-mptscsih_sas_persist_clear_table(void * arg)
+int
+mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
{
- MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+ u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
+
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "MPT event (=%02Xh) routed to SCSI host driver!\n",
+ ioc->name, event));
+
+ if ((event == MPI_EVENT_IOC_BUS_RESET ||
+ event == MPI_EVENT_EXT_BUS_RESET) &&
+ (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
+ ioc->soft_resets++;
- mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
+ return 1; /* currently means nothing really */
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * Bus Scan and Domain Validation functionality ...
+ */
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/*
+ * mptscsih_scandv_complete - Scan and DV callback routine registered
+ * to Fustion MPT (base) driver.
+ *
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @mf: Pointer to original MPT request frame
+ * @mr: Pointer to MPT reply frame (NULL if TurboReply)
+ *
+ * This routine is called from mpt.c::mpt_interrupt() at the completion
+ * of any SCSI IO request.
+ * This routine is registered with the Fusion MPT (base) driver at driver
+ * load/init time via the mpt_register() API call.
+ *
+ * Returns 1 indicating alloc'd request frame ptr should be freed.
+ *
+ * Remark: Sets a completion code and (possibly) saves sense data
+ * in the IOC member localReply structure.
+ * Used ONLY for DV and other internal commands.
+ */
int
-mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
+mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+ MPT_FRAME_HDR *reply)
{
- MPT_SCSI_HOST *hd;
- u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
+ SCSIIORequest_t *pReq;
+ SCSIIOReply_t *pReply;
+ u8 cmd;
+ u16 req_idx;
+ u8 *sense_data;
+ int sz;
+
+ ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+ ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
+ if (!reply)
+ goto out;
+
+ pReply = (SCSIIOReply_t *) reply;
+ pReq = (SCSIIORequest_t *) req;
+ ioc->internal_cmds.completion_code =
+ mptscsih_get_completion_code(ioc, req, reply);
+ ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ memcpy(ioc->internal_cmds.reply, reply,
+ min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
+ cmd = reply->u.hdr.Function;
+ if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+ (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
+ (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
+ req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
+ sense_data = ((u8 *)ioc->sense_buf_pool +
+ (req_idx * MPT_SENSE_BUFFER_ALLOC));
+ sz = min_t(int, pReq->SenseBufferLength,
+ MPT_SENSE_BUFFER_ALLOC);
+ memcpy(ioc->internal_cmds.sense, sense_data, sz);
+ }
+ out:
+ if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
+ return 0;
+ ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->internal_cmds.done);
+ return 1;
+}
- devtprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
- ioc->name, event));
- if (ioc->sh == NULL ||
- ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL))
- return 1;
+/**
+ * mptscsih_get_completion_code -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @req: Pointer to original MPT request frame
+ * @reply: Pointer to MPT reply frame (NULL if TurboReply)
+ *
+ **/
+static int
+mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+ MPT_FRAME_HDR *reply)
+{
+ SCSIIOReply_t *pReply;
+ MpiRaidActionReply_t *pr;
+ u8 scsi_status;
+ u16 status;
+ int completion_code;
- switch (event) {
- case MPI_EVENT_UNIT_ATTENTION: /* 03 */
- /* FIXME! */
- break;
- case MPI_EVENT_IOC_BUS_RESET: /* 04 */
- case MPI_EVENT_EXT_BUS_RESET: /* 05 */
- if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
- hd->soft_resets++;
- break;
- case MPI_EVENT_LOGOUT: /* 09 */
- /* FIXME! */
+ pReply = (SCSIIOReply_t *)reply;
+ status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+ scsi_status = pReply->SCSIStatus;
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
+ "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
+ scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
+
+ switch (status) {
+
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
break;
- /*
- * CHECKME! Don't think we need to do
- * anything for these, but...
- */
- case MPI_EVENT_RESCAN: /* 06 */
- case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */
- case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */
- /*
- * CHECKME! Falling thru...
- */
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ completion_code = MPT_SCANDV_DID_RESET;
break;
- case MPI_EVENT_INTEGRATED_RAID: /* 0B */
- {
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- pMpiEventDataRaid_t pRaidEventData =
- (pMpiEventDataRaid_t) pEvReply->Data;
- /* Domain Validation Needed */
- if (ioc->bus_type == SPI &&
- pRaidEventData->ReasonCode ==
- MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED)
- mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum);
-#endif
+ case MPI_IOCSTATUS_BUSY:
+ case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
+ completion_code = MPT_SCANDV_BUSY;
break;
- }
- /* Persistent table is full. */
- case MPI_EVENT_PERSISTENT_TABLE_FULL:
- INIT_WORK(&mptscsih_persistTask,
- mptscsih_sas_persist_clear_table,(void *)ioc);
- schedule_work(&mptscsih_persistTask);
+ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
+ case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
+ case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
+ if (pReply->Function == MPI_FUNCTION_CONFIG) {
+ completion_code = MPT_SCANDV_GOOD;
+ } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
+ pr = (MpiRaidActionReply_t *)reply;
+ if (le16_to_cpu(pr->ActionStatus) ==
+ MPI_RAID_ACTION_ASTATUS_SUCCESS)
+ completion_code = MPT_SCANDV_GOOD;
+ else
+ completion_code = MPT_SCANDV_SOME_ERROR;
+ } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
+ completion_code = MPT_SCANDV_SENSE;
+ else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
+ if (req->u.scsireq.CDB[0] == INQUIRY)
+ completion_code = MPT_SCANDV_ISSUE_SENSE;
+ else
+ completion_code = MPT_SCANDV_DID_RESET;
+ } else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
+ completion_code = MPT_SCANDV_DID_RESET;
+ else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+ completion_code = MPT_SCANDV_DID_RESET;
+ else if (scsi_status == MPI_SCSI_STATUS_BUSY)
+ completion_code = MPT_SCANDV_BUSY;
+ else
+ completion_code = MPT_SCANDV_GOOD;
break;
- case MPI_EVENT_NONE: /* 00 */
- case MPI_EVENT_LOG_DATA: /* 01 */
- case MPI_EVENT_STATE_CHANGE: /* 02 */
- case MPI_EVENT_EVENT_CHANGE: /* 0A */
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+ completion_code = MPT_SCANDV_DID_RESET;
+ else
+ completion_code = MPT_SCANDV_SOME_ERROR;
+ break;
default:
- dprintk((KERN_INFO " Ignoring event (=%02Xh)\n", event));
+ completion_code = MPT_SCANDV_SOME_ERROR;
break;
- }
- return 1; /* currently means nothing really */
+ } /* switch(status) */
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ " completionCode set to %08xh\n", ioc->name, completion_code));
+ return completion_code;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mptscsih_initTarget - Target, LUN alloc/free functionality.
- * @hd: Pointer to MPT_SCSI_HOST structure
- * @vtarget: per target private data
- * @lun: SCSI LUN id
- * @data: Pointer to data
- * @dlen: Number of INQUIRY bytes
+/**
+ * mptscsih_do_cmd - Do internal command.
+ * @hd: MPT_SCSI_HOST pointer
+ * @io: INTERNAL_CMD pointer.
+ *
+ * Issue the specified internally generated command and do command
+ * specific cleanup. For bus scan / DV only.
+ * NOTES: If command is Inquiry and status is good,
+ * initialize a target structure, save the data
+ *
+ * Remark: Single threaded access only.
*
- * NOTE: It's only SAFE to call this routine if data points to
- * sane & valid STANDARD INQUIRY data!
+ * Return:
+ * < 0 if an illegal command or no resources
*
- * Allocate and initialize memory for this target.
- * Save inquiry data.
+ * 0 if good
*
+ * > 0 if command complete but some type of completion error.
*/
-static void
-mptscsih_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, u8 lun, char *data, int dlen)
+static int
+mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
{
- SpiCfgData *pSpi;
- char data_56;
- int inq_len;
+ MPT_FRAME_HDR *mf;
+ SCSIIORequest_t *pScsiReq;
+ int my_idx, ii, dir;
+ int timeout;
+ char cmdLen;
+ char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+ u8 cmd = io->cmd;
+ MPT_ADAPTER *ioc = hd->ioc;
+ int ret = 0;
+ unsigned long timeleft;
+ unsigned long flags;
- dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
- hd->ioc->name, vtarget->bus_id, vtarget->target_id, lun, hd));
+ /* don't send internal command during diag reset */
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: busy with host reset\n", ioc->name, __func__));
+ return MPT_SCANDV_BUSY;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
- /*
- * If the peripheral qualifier filter is enabled then if the target reports a 0x1
- * (i.e. The targer is capable of supporting the specified peripheral device type
- * on this logical unit; however, the physical device is not currently connected
- * to this logical unit) it will be converted to a 0x3 (i.e. The target is not
- * capable of supporting a physical device on this logical unit). This is to work
- * around a bug in th emid-layer in some distributions in which the mid-layer will
- * continue to try to communicate to the LUN and evntually create a dummy LUN.
- */
- if (hd->mpt_pq_filter && dlen && (data[0] & 0xE0))
- data[0] |= 0x40;
-
- /* Is LUN supported? If so, upper 2 bits will be 0
- * in first byte of inquiry data.
- */
- if (data[0] & 0xe0)
- return;
+ mutex_lock(&ioc->internal_cmds.mutex);
- if (vtarget == NULL)
- return;
+ /* Set command specific information
+ */
+ switch (cmd) {
+ case INQUIRY:
+ cmdLen = 6;
+ dir = MPI_SCSIIO_CONTROL_READ;
+ CDB[0] = cmd;
+ CDB[4] = io->size;
+ timeout = 10;
+ break;
- if (data)
- vtarget->type = data[0];
+ case TEST_UNIT_READY:
+ cmdLen = 6;
+ dir = MPI_SCSIIO_CONTROL_READ;
+ timeout = 10;
+ break;
- if (hd->ioc->bus_type != SPI)
- return;
+ case START_STOP:
+ cmdLen = 6;
+ dir = MPI_SCSIIO_CONTROL_READ;
+ CDB[0] = cmd;
+ CDB[4] = 1; /*Spin up the disk */
+ timeout = 15;
+ break;
- if ((data[0] == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
- /* Treat all Processors as SAF-TE if
- * command line option is set */
- vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
- mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id);
- }else if ((data[0] == TYPE_PROCESSOR) &&
- !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
- if ( dlen > 49 ) {
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
- if ( data[44] == 'S' &&
- data[45] == 'A' &&
- data[46] == 'F' &&
- data[47] == '-' &&
- data[48] == 'T' &&
- data[49] == 'E' ) {
- vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
- mptscsih_writeIOCPage4(hd, vtarget->target_id, vtarget->bus_id);
- }
- }
- }
- if (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_INQUIRY)) {
- inq_len = dlen < 8 ? dlen : 8;
- memcpy (vtarget->inq_data, data, inq_len);
- /* If have not done DV, set the DV flag.
- */
- pSpi = &hd->ioc->spi_data;
- if ((data[0] == TYPE_TAPE) || (data[0] == TYPE_PROCESSOR)) {
- if (pSpi->dvStatus[vtarget->target_id] & MPT_SCSICFG_DV_NOT_DONE)
- pSpi->dvStatus[vtarget->target_id] |= MPT_SCSICFG_NEED_DV;
- }
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_INQUIRY;
+ case REQUEST_SENSE:
+ cmdLen = 6;
+ CDB[0] = cmd;
+ CDB[4] = io->size;
+ dir = MPI_SCSIIO_CONTROL_READ;
+ timeout = 10;
+ break;
- data_56 = 0x0F; /* Default to full capabilities if Inq data length is < 57 */
- if (dlen > 56) {
- if ( (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_56))) {
- /* Update the target capabilities
- */
- data_56 = data[56];
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_56;
- }
- }
- mptscsih_setTargetNegoParms(hd, vtarget, data_56);
- } else {
- /* Initial Inquiry may not request enough data bytes to
- * obtain byte 57. DV will; if target doesn't return
- * at least 57 bytes, data[56] will be zero. */
- if (dlen > 56) {
- if ( (!(vtarget->tflags & MPT_TARGET_FLAGS_VALID_56))) {
- /* Update the target capabilities
- */
- data_56 = data[56];
- vtarget->tflags |= MPT_TARGET_FLAGS_VALID_56;
- mptscsih_setTargetNegoParms(hd, vtarget, data_56);
- }
- }
- }
-}
+ case READ_BUFFER:
+ cmdLen = 10;
+ dir = MPI_SCSIIO_CONTROL_READ;
+ CDB[0] = cmd;
+ if (io->flags & MPT_ICFLAG_ECHO) {
+ CDB[1] = 0x0A;
+ } else {
+ CDB[1] = 0x02;
+ }
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * Update the target negotiation parameters based on the
- * the Inquiry data, adapter capabilities, and NVRAM settings.
- *
- */
-static void
-mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, char byte56)
-{
- SpiCfgData *pspi_data = &hd->ioc->spi_data;
- int id = (int) target->target_id;
- int nvram;
- VirtTarget *vtarget;
- int ii;
- u8 width = MPT_NARROW;
- u8 factor = MPT_ASYNC;
- u8 offset = 0;
- u8 version, nfactor;
- u8 noQas = 1;
-
- target->negoFlags = pspi_data->noQas;
-
- /* noQas == 0 => device supports QAS. Need byte 56 of Inq to determine
- * support. If available, default QAS to off and allow enabling.
- * If not available, default QAS to on, turn off for non-disks.
- */
+ if (io->flags & MPT_ICFLAG_BUF_CAP) {
+ CDB[1] |= 0x01;
+ }
+ CDB[6] = (io->size >> 16) & 0xFF;
+ CDB[7] = (io->size >> 8) & 0xFF;
+ CDB[8] = io->size & 0xFF;
+ timeout = 10;
+ break;
- /* Set flags based on Inquiry data
- */
- version = target->inq_data[2] & 0x07;
- if (version < 2) {
- width = 0;
- factor = MPT_ULTRA2;
- offset = pspi_data->maxSyncOffset;
- target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
- } else {
- if (target->inq_data[7] & 0x20) {
- width = 1;
+ case WRITE_BUFFER:
+ cmdLen = 10;
+ dir = MPI_SCSIIO_CONTROL_WRITE;
+ CDB[0] = cmd;
+ if (io->flags & MPT_ICFLAG_ECHO) {
+ CDB[1] = 0x0A;
+ } else {
+ CDB[1] = 0x02;
}
+ CDB[6] = (io->size >> 16) & 0xFF;
+ CDB[7] = (io->size >> 8) & 0xFF;
+ CDB[8] = io->size & 0xFF;
+ timeout = 10;
+ break;
- if (target->inq_data[7] & 0x10) {
- factor = pspi_data->minSyncFactor;
- if (target->tflags & MPT_TARGET_FLAGS_VALID_56) {
- /* bits 2 & 3 show Clocking support */
- if ((byte56 & 0x0C) == 0)
- factor = MPT_ULTRA2;
- else {
- if ((byte56 & 0x03) == 0)
- factor = MPT_ULTRA160;
- else {
- factor = MPT_ULTRA320;
- if (byte56 & 0x02)
- {
- ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id));
- noQas = 0;
- }
- if (target->inq_data[0] == TYPE_TAPE) {
- if (byte56 & 0x01)
- target->negoFlags |= MPT_TAPE_NEGO_IDP;
- }
- }
- }
- } else {
- ddvtprintk((KERN_INFO "Enabling QAS on id=%d due to ~TARGET_FLAGS_VALID_56!\n", id));
- noQas = 0;
- }
+ case RESERVE:
+ cmdLen = 6;
+ dir = MPI_SCSIIO_CONTROL_READ;
+ CDB[0] = cmd;
+ timeout = 10;
+ break;
- offset = pspi_data->maxSyncOffset;
+ case RELEASE:
+ cmdLen = 6;
+ dir = MPI_SCSIIO_CONTROL_READ;
+ CDB[0] = cmd;
+ timeout = 10;
+ break;
- /* If RAID, never disable QAS
- * else if non RAID, do not disable
- * QAS if bit 1 is set
- * bit 1 QAS support, non-raid only
- * bit 0 IU support
- */
- if (target->raidVolume == 1) {
- noQas = 0;
- }
- } else {
- factor = MPT_ASYNC;
- offset = 0;
- }
- }
+ case SYNCHRONIZE_CACHE:
+ cmdLen = 10;
+ dir = MPI_SCSIIO_CONTROL_READ;
+ CDB[0] = cmd;
+// CDB[1] = 0x02; /* set immediate bit */
+ timeout = 10;
+ break;
- if ( (target->inq_data[7] & 0x02) == 0) {
- target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
+ default:
+ /* Error Case */
+ ret = -EFAULT;
+ goto out;
}
- /* Update tflags based on NVRAM settings. (SCSI only)
+ /* Get and Populate a free Frame
+ * MsgContext set in mpt_get_msg_frame call
*/
- if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- nvram = pspi_data->nvram[id];
- nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
+ if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
+ dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
+ ioc->name, __func__));
+ ret = MPT_SCANDV_BUSY;
+ goto out;
+ }
- if (width)
- width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
+ pScsiReq = (SCSIIORequest_t *) mf;
- if (offset > 0) {
- /* Ensure factor is set to the
- * maximum of: adapter, nvram, inquiry
- */
- if (nfactor) {
- if (nfactor < pspi_data->minSyncFactor )
- nfactor = pspi_data->minSyncFactor;
-
- factor = max(factor, nfactor);
- if (factor == MPT_ASYNC)
- offset = 0;
- } else {
- offset = 0;
- factor = MPT_ASYNC;
- }
- } else {
- factor = MPT_ASYNC;
- }
- }
+ /* Get the request index */
+ my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
+ ADD_INDEX_LOG(my_idx); /* for debug */
- /* Make sure data is consistent
- */
- if ((!width) && (factor < MPT_ULTRA2)) {
- factor = MPT_ULTRA2;
+ if (io->flags & MPT_ICFLAG_PHYS_DISK) {
+ pScsiReq->TargetID = io->physDiskNum;
+ pScsiReq->Bus = 0;
+ pScsiReq->ChainOffset = 0;
+ pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
+ } else {
+ pScsiReq->TargetID = io->id;
+ pScsiReq->Bus = io->channel;
+ pScsiReq->ChainOffset = 0;
+ pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
}
- /* Save the data to the target structure.
- */
- target->minSyncFactor = factor;
- target->maxOffset = offset;
- target->maxWidth = width;
+ pScsiReq->CDBLength = cmdLen;
+ pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
- target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
+ pScsiReq->Reserved = 0;
- /* Disable unused features.
- */
- if (!width)
- target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
+ pScsiReq->MsgFlags = mpt_msg_flags(ioc);
+ /* MsgContext set in mpt_get_msg_fram call */
- if (!offset)
- target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
+ int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
- if ( factor > MPT_ULTRA320 )
- noQas = 0;
+ if (io->flags & MPT_ICFLAG_TAGGED_CMD)
+ pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
+ else
+ pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
- /* GEM, processor WORKAROUND
- */
- if ((target->inq_data[0] == TYPE_PROCESSOR) || (target->inq_data[0] > 0x08)) {
- target->negoFlags |= (MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC);
- pspi_data->dvStatus[id] |= MPT_SCSICFG_BLK_NEGO;
- } else {
- if (noQas && (pspi_data->noQas == 0)) {
- pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
- target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
-
- /* Disable QAS in a mixed configuration case
- */
-
- ddvtprintk((KERN_INFO "Disabling QAS due to noQas=%02x on id=%d!\n", noQas, id));
- for (ii = 0; ii < id; ii++) {
- if ( (vtarget = hd->Targets[ii]) ) {
- vtarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
- mptscsih_writeSDP1(hd, 0, ii, vtarget->negoFlags);
- }
- }
- }
+ if (cmd == REQUEST_SENSE) {
+ pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
}
- /* Write SDP1 on this I/O to this target */
- if (pspi_data->dvStatus[id] & MPT_SCSICFG_NEGOTIATE) {
- ddvtprintk((KERN_INFO "MPT_SCSICFG_NEGOTIATE on id=%d!\n", id));
- mptscsih_writeSDP1(hd, 0, id, hd->negoNvram);
- pspi_data->dvStatus[id] &= ~MPT_SCSICFG_NEGOTIATE;
- } else if (pspi_data->dvStatus[id] & MPT_SCSICFG_BLK_NEGO) {
- ddvtprintk((KERN_INFO "MPT_SCSICFG_BLK_NEGO on id=%d!\n", id));
- mptscsih_writeSDP1(hd, 0, id, MPT_SCSICFG_BLK_NEGO);
- pspi_data->dvStatus[id] &= ~MPT_SCSICFG_BLK_NEGO;
- }
-}
+ for (ii = 0; ii < 16; ii++)
+ pScsiReq->CDB[ii] = CDB[ii];
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * If no Target, bus reset on 1st I/O. Set the flag to
- * prevent any future negotiations to this device.
- */
-static void
-mptscsih_no_negotiate(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc)
-{
- VirtDevice *vdev;
+ pScsiReq->DataLength = cpu_to_le32(io->size);
+ pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
+ + (my_idx * MPT_SENSE_BUFFER_ALLOC));
- if ((vdev = sc->device->hostdata) != NULL)
- hd->ioc->spi_data.dvStatus[vdev->target_id] |= MPT_SCSICFG_BLK_NEGO;
- return;
-}
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%d\n",
+ ioc->name, __func__, cmd, io->channel, io->id, io->lun));
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * SCSI Config Page functionality ...
- */
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_setDevicePage1Flags - add Requested and Configuration fields flags
- * based on width, factor and offset parameters.
- * @width: bus width
- * @factor: sync factor
- * @offset: sync offset
- * @requestedPtr: pointer to requested values (updated)
- * @configurationPtr: pointer to configuration values (updated)
- * @flags: flags to block WDTR or SDTR negotiation
- *
- * Return: None.
- *
- * Remark: Called by writeSDP1 and _dv_params
- */
-static void
-mptscsih_setDevicePage1Flags (u8 width, u8 factor, u8 offset, int *requestedPtr, int *configurationPtr, u8 flags)
-{
- u8 nowide = flags & MPT_TARGET_NO_NEGO_WIDE;
- u8 nosync = flags & MPT_TARGET_NO_NEGO_SYNC;
-
- *configurationPtr = 0;
- *requestedPtr = width ? MPI_SCSIDEVPAGE1_RP_WIDE : 0;
- *requestedPtr |= (offset << 16) | (factor << 8);
-
- if (width && offset && !nowide && !nosync) {
- if (factor < MPT_ULTRA160) {
- *requestedPtr |= (MPI_SCSIDEVPAGE1_RP_IU + MPI_SCSIDEVPAGE1_RP_DT);
- if ((flags & MPT_TARGET_NO_NEGO_QAS) == 0)
- *requestedPtr |= MPI_SCSIDEVPAGE1_RP_QAS;
- if (flags & MPT_TAPE_NEGO_IDP)
- *requestedPtr |= 0x08000000;
- } else if (factor < MPT_ULTRA2) {
- *requestedPtr |= MPI_SCSIDEVPAGE1_RP_DT;
+ if (dir == MPI_SCSIIO_CONTROL_READ)
+ ioc->add_sge((char *) &pScsiReq->SGL,
+ MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
+ else
+ ioc->add_sge((char *) &pScsiReq->SGL,
+ MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
+
+ INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
+ mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
+ timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
+ timeout*HZ);
+ if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = MPT_SCANDV_DID_RESET;
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
+ cmd));
+ if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+ mpt_free_msg_frame(ioc, mf);
+ goto out;
}
+ if (!timeleft) {
+ printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+ }
+ goto out;
}
- if (nowide)
- *configurationPtr |= MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED;
+ ret = ioc->internal_cmds.completion_code;
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
+ ioc->name, __func__, ret));
- if (nosync)
- *configurationPtr |= MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED;
-
- return;
+ out:
+ CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+ mutex_unlock(&ioc->internal_cmds.mutex);
+ return ret;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_writeSDP1 - write SCSI Device Page 1
- * @hd: Pointer to a SCSI Host Strucutre
- * @portnum: IOC port number
- * @target_id: writeSDP1 for single ID
- * @flags: MPT_SCSICFG_ALL_IDS, MPT_SCSICFG_USE_NVRAM, MPT_SCSICFG_BLK_NEGO
- *
- * Return: -EFAULT if read of config page header fails
- * or 0 if success.
+/**
+ * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
+ * @hd: Pointer to a SCSI HOST structure
+ * @vdevice: virtual target device
*
- * Remark: If a target has been found, the settings from the
- * target structure are used, else the device is set
- * to async/narrow.
+ * Uses the ISR, but with special processing.
+ * MUST be single-threaded.
*
- * Remark: Called during init and after a FW reload.
- * Remark: We do not wait for a return, write pages sequentially.
*/
-static int
-mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
+static void
+mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
{
- MPT_ADAPTER *ioc = hd->ioc;
- Config_t *pReq;
- SCSIDevicePage1_t *pData;
- VirtTarget *vtarget=NULL;
- MPT_FRAME_HDR *mf;
- dma_addr_t dataDma;
- u16 req_idx;
- u32 frameOffset;
- u32 requested, configuration, flagsLength;
- int ii, nvram;
- int id = 0, maxid = 0;
- u8 width;
- u8 factor;
- u8 offset;
- u8 bus = 0;
- u8 negoFlags;
- u8 maxwidth, maxoffset, maxfactor;
-
- if (ioc->spi_data.sdp1length == 0)
- return 0;
-
- if (flags & MPT_SCSICFG_ALL_IDS) {
- id = 0;
- maxid = ioc->sh->max_id - 1;
- } else if (ioc->sh) {
- id = target_id;
- maxid = min_t(int, id, ioc->sh->max_id - 1);
- }
-
- for (; id <= maxid; id++) {
+ INTERNAL_CMD iocmd;
- if (id == ioc->pfacts[portnum].PortSCSIID)
- continue;
+ /* Ignore hidden raid components, this is handled when the command
+ * is sent to the volume
+ */
+ if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+ return;
- /* Use NVRAM to get adapter and target maximums
- * Data over-riden by target structure information, if present
- */
- maxwidth = ioc->spi_data.maxBusWidth;
- maxoffset = ioc->spi_data.maxSyncOffset;
- maxfactor = ioc->spi_data.minSyncFactor;
- if (ioc->spi_data.nvram && (ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- nvram = ioc->spi_data.nvram[id];
-
- if (maxwidth)
- maxwidth = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
-
- if (maxoffset > 0) {
- maxfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
- if (maxfactor == 0) {
- /* Key for async */
- maxfactor = MPT_ASYNC;
- maxoffset = 0;
- } else if (maxfactor < ioc->spi_data.minSyncFactor) {
- maxfactor = ioc->spi_data.minSyncFactor;
- }
- } else
- maxfactor = MPT_ASYNC;
- }
+ if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted ||
+ !vdevice->configured_lun)
+ return;
- /* Set the negotiation flags.
- */
- negoFlags = ioc->spi_data.noQas;
- if (!maxwidth)
- negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
+ /* Following parameters will not change
+ * in this routine.
+ */
+ iocmd.cmd = SYNCHRONIZE_CACHE;
+ iocmd.flags = 0;
+ iocmd.physDiskNum = -1;
+ iocmd.data = NULL;
+ iocmd.data_dma = -1;
+ iocmd.size = 0;
+ iocmd.rsvd = iocmd.rsvd2 = 0;
+ iocmd.channel = vdevice->vtarget->channel;
+ iocmd.id = vdevice->vtarget->id;
+ iocmd.lun = vdevice->lun;
- if (!maxoffset)
- negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
+ mptscsih_do_cmd(hd, &iocmd);
+}
- if (flags & MPT_SCSICFG_USE_NVRAM) {
- width = maxwidth;
- factor = maxfactor;
- offset = maxoffset;
- } else {
- width = 0;
- factor = MPT_ASYNC;
- offset = 0;
- //negoFlags = 0;
- //negoFlags = MPT_TARGET_NO_NEGO_SYNC;
- }
+static ssize_t
+mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- /* If id is not a raid volume, get the updated
- * transmission settings from the target structure.
- */
- if (hd->Targets && (vtarget = hd->Targets[id]) && !vtarget->raidVolume) {
- width = vtarget->maxWidth;
- factor = vtarget->minSyncFactor;
- offset = vtarget->maxOffset;
- negoFlags = vtarget->negoFlags;
- }
+ return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
+ (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
+ (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
+ (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
+ ioc->facts.FWVersion.Word & 0x000000FF);
+}
+static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL);
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
- /* Force to async and narrow if DV has not been executed
- * for this ID
- */
- if ((hd->ioc->spi_data.dvStatus[id] & MPT_SCSICFG_DV_NOT_DONE) != 0) {
- width = 0;
- factor = MPT_ASYNC;
- offset = 0;
- }
-#endif
+static ssize_t
+mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- if (flags & MPT_SCSICFG_BLK_NEGO)
- negoFlags |= MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC;
+ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+ (ioc->biosVersion & 0xFF000000) >> 24,
+ (ioc->biosVersion & 0x00FF0000) >> 16,
+ (ioc->biosVersion & 0x0000FF00) >> 8,
+ ioc->biosVersion & 0x000000FF);
+}
+static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL);
- mptscsih_setDevicePage1Flags(width, factor, offset,
- &requested, &configuration, negoFlags);
- dnegoprintk(("writeSDP1: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
- target_id, width, factor, offset, negoFlags, requested, configuration));
+static ssize_t
+mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- /* Get a MF for this command.
- */
- if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dfailprintk((MYIOC_s_WARN_FMT "write SDP1: no msg frames!\n",
- ioc->name));
- return -EAGAIN;
- }
+ return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion);
+}
+static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL);
- ddvprintk((MYIOC_s_INFO_FMT "WriteSDP1 (mf=%p, id=%d, req=0x%x, cfg=0x%x)\n",
- hd->ioc->name, mf, id, requested, configuration));
+static ssize_t
+mptscsih_version_product_show(struct device *dev,
+ struct device_attribute *attr,
+char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
+ return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name);
+}
+static DEVICE_ATTR(version_product, S_IRUGO,
+ mptscsih_version_product_show, NULL);
- /* Set the request and the data pointers.
- * Request takes: 36 bytes (32 bit SGE)
- * SCSI Device Page 1 requires 16 bytes
- * 40 + 16 <= size of SCSI IO Request = 56 bytes
- * and MF size >= 64 bytes.
- * Place data at end of MF.
- */
- pReq = (Config_t *)mf;
+static ssize_t
+mptscsih_version_nvdata_persistent_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- frameOffset = ioc->req_sz - sizeof(SCSIDevicePage1_t);
+ return snprintf(buf, PAGE_SIZE, "%02xh\n",
+ ioc->nvdata_version_persistent);
+}
+static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
+ mptscsih_version_nvdata_persistent_show, NULL);
- pData = (SCSIDevicePage1_t *)((u8 *) mf + frameOffset);
- dataDma = ioc->req_frames_dma + (req_idx * ioc->req_sz) + frameOffset;
+static ssize_t
+mptscsih_version_nvdata_default_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- /* Complete the request frame (same for all requests).
- */
- pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- pReq->Reserved = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_CONFIG;
- pReq->ExtPageLength = 0;
- pReq->ExtPageType = 0;
- pReq->MsgFlags = 0;
- for (ii=0; ii < 8; ii++) {
- pReq->Reserved2[ii] = 0;
- }
- pReq->Header.PageVersion = ioc->spi_data.sdp1version;
- pReq->Header.PageLength = ioc->spi_data.sdp1length;
- pReq->Header.PageNumber = 1;
- pReq->Header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- pReq->PageAddress = cpu_to_le32(id | (bus << 8 ));
+ return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default);
+}
+static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
+ mptscsih_version_nvdata_default_show, NULL);
- /* Add a SGE to the config request.
- */
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | ioc->spi_data.sdp1length * 4;
+static ssize_t
+mptscsih_board_name_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+ return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name);
+}
+static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL);
- /* Set up the common data portion
- */
- pData->Header.PageVersion = pReq->Header.PageVersion;
- pData->Header.PageLength = pReq->Header.PageLength;
- pData->Header.PageNumber = pReq->Header.PageNumber;
- pData->Header.PageType = pReq->Header.PageType;
- pData->RequestedParameters = cpu_to_le32(requested);
- pData->Reserved = 0;
- pData->Configuration = cpu_to_le32(configuration);
-
- dprintk((MYIOC_s_INFO_FMT
- "write SDP1: id %d pgaddr 0x%x req 0x%x config 0x%x\n",
- ioc->name, id, (id | (bus<<8)),
- requested, configuration));
-
- mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
- }
+static ssize_t
+mptscsih_board_assembly_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- return 0;
+ return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly);
}
+static DEVICE_ATTR(board_assembly, S_IRUGO,
+ mptscsih_board_assembly_show, NULL);
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_writeIOCPage4 - write IOC Page 4
- * @hd: Pointer to a SCSI Host Structure
- * @target_id: write IOC Page4 for this ID & Bus
- *
- * Return: -EAGAIN if unable to obtain a Message Frame
- * or 0 if success.
- *
- * Remark: We do not wait for a return, write pages sequentially.
- */
-static int
-mptscsih_writeIOCPage4(MPT_SCSI_HOST *hd, int target_id, int bus)
+static ssize_t
+mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
- MPT_ADAPTER *ioc = hd->ioc;
- Config_t *pReq;
- IOCPage4_t *IOCPage4Ptr;
- MPT_FRAME_HDR *mf;
- dma_addr_t dataDma;
- u16 req_idx;
- u32 frameOffset;
- u32 flagsLength;
- int ii;
-
- /* Get a MF for this command.
- */
- if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
- dfailprintk((MYIOC_s_WARN_FMT "writeIOCPage4 : no msg frames!\n",
- ioc->name));
- return -EAGAIN;
- }
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- /* Set the request and the data pointers.
- * Place data at end of MF.
- */
- pReq = (Config_t *)mf;
+ return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer);
+}
+static DEVICE_ATTR(board_tracer, S_IRUGO,
+ mptscsih_board_tracer_show, NULL);
- req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
+static ssize_t
+mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- /* Complete the request frame (same for all requests).
- */
- pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- pReq->Reserved = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_CONFIG;
- pReq->ExtPageLength = 0;
- pReq->ExtPageType = 0;
- pReq->MsgFlags = 0;
- for (ii=0; ii < 8; ii++) {
- pReq->Reserved2[ii] = 0;
- }
+ return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
+}
+static DEVICE_ATTR(io_delay, S_IRUGO,
+ mptscsih_io_delay_show, NULL);
- IOCPage4Ptr = ioc->spi_data.pIocPg4;
- dataDma = ioc->spi_data.IocPg4_dma;
- ii = IOCPage4Ptr->ActiveSEP++;
- IOCPage4Ptr->SEP[ii].SEPTargetID = target_id;
- IOCPage4Ptr->SEP[ii].SEPBus = bus;
- pReq->Header = IOCPage4Ptr->Header;
- pReq->PageAddress = cpu_to_le32(target_id | (bus << 8 ));
+static ssize_t
+mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- /* Add a SGE to the config request.
- */
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
- (IOCPage4Ptr->Header.PageLength + ii) * 4;
+ return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
+}
+static DEVICE_ATTR(device_delay, S_IRUGO,
+ mptscsih_device_delay_show, NULL);
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+static ssize_t
+mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
- dinitprintk((MYIOC_s_INFO_FMT
- "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
- ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, target_id, bus));
+ return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level);
+}
+static ssize_t
+mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
+ int val = 0;
- mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
+ if (sscanf(buf, "%x", &val) != 1)
+ return -EINVAL;
- return 0;
+ ioc->debug_level = val;
+ printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n",
+ ioc->name, ioc->debug_level);
+ return strlen(buf);
}
+static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR,
+ mptscsih_debug_level_show, mptscsih_debug_level_store);
+
+struct device_attribute *mptscsih_host_attrs[] = {
+ &dev_attr_version_fw,
+ &dev_attr_version_bios,
+ &dev_attr_version_mpi,
+ &dev_attr_version_product,
+ &dev_attr_version_nvdata_persistent,
+ &dev_attr_version_nvdata_default,
+ &dev_attr_board_name,
+ &dev_attr_board_assembly,
+ &dev_attr_board_tracer,
+ &dev_attr_io_delay,
+ &dev_attr_device_delay,
+ &dev_attr_debug_level,
+ NULL,
+};
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * Bus Scan and Domain Validation functionality ...
- */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- * mptscsih_scandv_complete - Scan and DV callback routine registered
- * to Fustion MPT (base) driver.
- *
- * @ioc: Pointer to MPT_ADAPTER structure
- * @mf: Pointer to original MPT request frame
- * @mr: Pointer to MPT reply frame (NULL if TurboReply)
- *
- * This routine is called from mpt.c::mpt_interrupt() at the completion
- * of any SCSI IO request.
- * This routine is registered with the Fusion MPT (base) driver at driver
- * load/init time via the mpt_register() API call.
- *
- * Returns 1 indicating alloc'd request frame ptr should be freed.
- *
- * Remark: Sets a completion code and (possibly) saves sense data
- * in the IOC member localReply structure.
- * Used ONLY for DV and other internal commands.
- */
-int
-mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
-{
- MPT_SCSI_HOST *hd;
- SCSIIORequest_t *pReq;
- int completionCode;
- u16 req_idx;
-
- hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
-
- if ((mf == NULL) ||
- (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
- printk(MYIOC_s_ERR_FMT
- "ScanDvComplete, %s req frame ptr! (=%p)\n",
- ioc->name, mf?"BAD":"NULL", (void *) mf);
- goto wakeup;
- }
-
- del_timer(&hd->timer);
- req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- hd->ScsiLookup[req_idx] = NULL;
- pReq = (SCSIIORequest_t *) mf;
-
- if (mf != hd->cmdPtr) {
- printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n",
- hd->ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx);
- }
- hd->cmdPtr = NULL;
-
- ddvprintk((MYIOC_s_INFO_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n",
- hd->ioc->name, mf, mr, req_idx));
-
- hd->pLocal = &hd->localReply;
- hd->pLocal->scsiStatus = 0;
-
- /* If target struct exists, clear sense valid flag.
- */
- if (mr == NULL) {
- completionCode = MPT_SCANDV_GOOD;
- } else {
- SCSIIOReply_t *pReply;
- u16 status;
- u8 scsi_status;
-
- pReply = (SCSIIOReply_t *) mr;
-
- status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
- scsi_status = pReply->SCSIStatus;
-
- ddvtprintk((KERN_NOTICE " IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh, IOCLogInfo=%08xh\n",
- status, pReply->SCSIState, scsi_status,
- le32_to_cpu(pReply->IOCLogInfo)));
-
- switch(status) {
-
- case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
- completionCode = MPT_SCANDV_SELECTION_TIMEOUT;
- break;
-
- case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
- case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
- case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
- case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
- completionCode = MPT_SCANDV_DID_RESET;
- break;
-
- case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
- case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
- case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
- if (pReply->Function == MPI_FUNCTION_CONFIG) {
- ConfigReply_t *pr = (ConfigReply_t *)mr;
- completionCode = MPT_SCANDV_GOOD;
- hd->pLocal->header.PageVersion = pr->Header.PageVersion;
- hd->pLocal->header.PageLength = pr->Header.PageLength;
- hd->pLocal->header.PageNumber = pr->Header.PageNumber;
- hd->pLocal->header.PageType = pr->Header.PageType;
-
- } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
- /* If the RAID Volume request is successful,
- * return GOOD, else indicate that
- * some type of error occurred.
- */
- MpiRaidActionReply_t *pr = (MpiRaidActionReply_t *)mr;
- if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
- completionCode = MPT_SCANDV_GOOD;
- else
- completionCode = MPT_SCANDV_SOME_ERROR;
-
- } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
- u8 *sense_data;
- int sz;
-
- /* save sense data in global structure
- */
- completionCode = MPT_SCANDV_SENSE;
- hd->pLocal->scsiStatus = scsi_status;
- sense_data = ((u8 *)hd->ioc->sense_buf_pool +
- (req_idx * MPT_SENSE_BUFFER_ALLOC));
-
- sz = min_t(int, pReq->SenseBufferLength,
- SCSI_STD_SENSE_BYTES);
- memcpy(hd->pLocal->sense, sense_data, sz);
-
- ddvprintk((KERN_NOTICE " Check Condition, sense ptr %p\n",
- sense_data));
- } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
- if (pReq->CDB[0] == INQUIRY)
- completionCode = MPT_SCANDV_ISSUE_SENSE;
- else
- completionCode = MPT_SCANDV_DID_RESET;
- }
- else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
- completionCode = MPT_SCANDV_DID_RESET;
- else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
- completionCode = MPT_SCANDV_DID_RESET;
- else {
- completionCode = MPT_SCANDV_GOOD;
- hd->pLocal->scsiStatus = scsi_status;
- }
- break;
-
- case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
- if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
- completionCode = MPT_SCANDV_DID_RESET;
- else
- completionCode = MPT_SCANDV_SOME_ERROR;
- break;
-
- default:
- completionCode = MPT_SCANDV_SOME_ERROR;
- break;
-
- } /* switch(status) */
-
- ddvtprintk((KERN_NOTICE " completionCode set to %08xh\n",
- completionCode));
- } /* end of address reply case */
-
- hd->pLocal->completion = completionCode;
-
- /* MF and RF are freed in mpt_interrupt
- */
-wakeup:
- /* Free Chain buffers (will never chain) in scan or dv */
- //mptscsih_freeChainBuffers(ioc, req_idx);
-
- /*
- * Wake up the original calling thread
- */
- hd->scandv_wait_done = 1;
- wake_up(&hd->scandv_waitq);
-
- return 1;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_timer_expired - Call back for timer process.
- * Used only for dv functionality.
- * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long
- *
- */
-void
-mptscsih_timer_expired(unsigned long data)
-{
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *) data;
-
- ddvprintk((MYIOC_s_WARN_FMT "Timer Expired! Cmd %p\n", hd->ioc->name, hd->cmdPtr));
-
- if (hd->cmdPtr) {
- MPIHeader_t *cmd = (MPIHeader_t *)hd->cmdPtr;
-
- if (cmd->Function == MPI_FUNCTION_SCSI_IO_REQUEST) {
- /* Desire to issue a task management request here.
- * TM requests MUST be single threaded.
- * If old eh code and no TM current, issue request.
- * If new eh code, do nothing. Wait for OS cmd timeout
- * for bus reset.
- */
- ddvtprintk((MYIOC_s_NOTE_FMT "DV Cmd Timeout: NoOp\n", hd->ioc->name));
- } else {
- /* Perform a FW reload */
- if (mpt_HardResetHandler(hd->ioc, NO_SLEEP) < 0) {
- printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", hd->ioc->name);
- }
- }
- } else {
- /* This should NEVER happen */
- printk(MYIOC_s_WARN_FMT "Null cmdPtr!!!!\n", hd->ioc->name);
- }
-
- /* No more processing.
- * TM call will generate an interrupt for SCSI TM Management.
- * The FW will reply to all outstanding commands, callback will finish cleanup.
- * Hard reset clean-up will free all resources.
- */
- ddvprintk((MYIOC_s_WARN_FMT "Timer Expired Complete!\n", hd->ioc->name));
-
- return;
-}
-
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_do_raid - Format and Issue a RAID volume request message.
- * @hd: Pointer to scsi host structure
- * @action: What do be done.
- * @id: Logical target id.
- * @bus: Target locations bus.
- *
- * Returns: < 0 on a fatal error
- * 0 on success
- *
- * Remark: Wait to return until reply processed by the ISR.
- */
-static int
-mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io)
-{
- MpiRaidActionRequest_t *pReq;
- MPT_FRAME_HDR *mf;
- int in_isr;
-
- in_isr = in_interrupt();
- if (in_isr) {
- dprintk((MYIOC_s_WARN_FMT "Internal raid request not allowed in ISR context!\n",
- hd->ioc->name));
- return -EPERM;
- }
-
- /* Get and Populate a free Frame
- */
- if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
- ddvprintk((MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
- hd->ioc->name));
- return -EAGAIN;
- }
- pReq = (MpiRaidActionRequest_t *)mf;
- pReq->Action = action;
- pReq->Reserved1 = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_RAID_ACTION;
- pReq->VolumeID = io->id;
- pReq->VolumeBus = io->bus;
- pReq->PhysDiskNum = io->physDiskNum;
- pReq->MsgFlags = 0;
- pReq->Reserved2 = 0;
- pReq->ActionDataWord = 0; /* Reserved for this action */
- //pReq->ActionDataSGE = 0;
-
- mpt_add_sge((char *)&pReq->ActionDataSGE,
- MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
-
- ddvprintk((MYIOC_s_INFO_FMT "RAID Volume action %x id %d\n",
- hd->ioc->name, action, io->id));
-
- hd->pLocal = NULL;
- hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
- hd->scandv_wait_done = 0;
-
- /* Save cmd pointer, for resource free if timeout or
- * FW reload occurs
- */
- hd->cmdPtr = mf;
-
- add_timer(&hd->timer);
- mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf);
- wait_event(hd->scandv_waitq, hd->scandv_wait_done);
-
- if ((hd->pLocal == NULL) || (hd->pLocal->completion != MPT_SCANDV_GOOD))
- return -1;
-
- return 0;
-}
-#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_do_cmd - Do internal command.
- * @hd: MPT_SCSI_HOST pointer
- * @io: INTERNAL_CMD pointer.
- *
- * Issue the specified internally generated command and do command
- * specific cleanup. For bus scan / DV only.
- * NOTES: If command is Inquiry and status is good,
- * initialize a target structure, save the data
- *
- * Remark: Single threaded access only.
- *
- * Return:
- * < 0 if an illegal command or no resources
- *
- * 0 if good
- *
- * > 0 if command complete but some type of completion error.
- */
-static int
-mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
-{
- MPT_FRAME_HDR *mf;
- SCSIIORequest_t *pScsiReq;
- SCSIIORequest_t ReqCopy;
- int my_idx, ii, dir;
- int rc, cmdTimeout;
- int in_isr;
- char cmdLen;
- char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
- char cmd = io->cmd;
-
- in_isr = in_interrupt();
- if (in_isr) {
- dprintk((MYIOC_s_WARN_FMT "Internal SCSI IO request not allowed in ISR context!\n",
- hd->ioc->name));
- return -EPERM;
- }
-
-
- /* Set command specific information
- */
- switch (cmd) {
- case INQUIRY:
- cmdLen = 6;
- dir = MPI_SCSIIO_CONTROL_READ;
- CDB[0] = cmd;
- CDB[4] = io->size;
- cmdTimeout = 10;
- break;
-
- case TEST_UNIT_READY:
- cmdLen = 6;
- dir = MPI_SCSIIO_CONTROL_READ;
- cmdTimeout = 10;
- break;
-
- case START_STOP:
- cmdLen = 6;
- dir = MPI_SCSIIO_CONTROL_READ;
- CDB[0] = cmd;
- CDB[4] = 1; /*Spin up the disk */
- cmdTimeout = 15;
- break;
-
- case REQUEST_SENSE:
- cmdLen = 6;
- CDB[0] = cmd;
- CDB[4] = io->size;
- dir = MPI_SCSIIO_CONTROL_READ;
- cmdTimeout = 10;
- break;
-
- case READ_BUFFER:
- cmdLen = 10;
- dir = MPI_SCSIIO_CONTROL_READ;
- CDB[0] = cmd;
- if (io->flags & MPT_ICFLAG_ECHO) {
- CDB[1] = 0x0A;
- } else {
- CDB[1] = 0x02;
- }
-
- if (io->flags & MPT_ICFLAG_BUF_CAP) {
- CDB[1] |= 0x01;
- }
- CDB[6] = (io->size >> 16) & 0xFF;
- CDB[7] = (io->size >> 8) & 0xFF;
- CDB[8] = io->size & 0xFF;
- cmdTimeout = 10;
- break;
-
- case WRITE_BUFFER:
- cmdLen = 10;
- dir = MPI_SCSIIO_CONTROL_WRITE;
- CDB[0] = cmd;
- if (io->flags & MPT_ICFLAG_ECHO) {
- CDB[1] = 0x0A;
- } else {
- CDB[1] = 0x02;
- }
- CDB[6] = (io->size >> 16) & 0xFF;
- CDB[7] = (io->size >> 8) & 0xFF;
- CDB[8] = io->size & 0xFF;
- cmdTimeout = 10;
- break;
-
- case RESERVE:
- cmdLen = 6;
- dir = MPI_SCSIIO_CONTROL_READ;
- CDB[0] = cmd;
- cmdTimeout = 10;
- break;
-
- case RELEASE:
- cmdLen = 6;
- dir = MPI_SCSIIO_CONTROL_READ;
- CDB[0] = cmd;
- cmdTimeout = 10;
- break;
-
- case SYNCHRONIZE_CACHE:
- cmdLen = 10;
- dir = MPI_SCSIIO_CONTROL_READ;
- CDB[0] = cmd;
-// CDB[1] = 0x02; /* set immediate bit */
- cmdTimeout = 10;
- break;
-
- default:
- /* Error Case */
- return -EFAULT;
- }
-
- /* Get and Populate a free Frame
- */
- if ((mf = mpt_get_msg_frame(hd->ioc->InternalCtx, hd->ioc)) == NULL) {
- ddvprintk((MYIOC_s_WARN_FMT "No msg frames!\n",
- hd->ioc->name));
- return -EBUSY;
- }
-
- pScsiReq = (SCSIIORequest_t *) mf;
-
- /* Get the request index */
- my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- ADD_INDEX_LOG(my_idx); /* for debug */
-
- if (io->flags & MPT_ICFLAG_PHYS_DISK) {
- pScsiReq->TargetID = io->physDiskNum;
- pScsiReq->Bus = 0;
- pScsiReq->ChainOffset = 0;
- pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
- } else {
- pScsiReq->TargetID = io->id;
- pScsiReq->Bus = io->bus;
- pScsiReq->ChainOffset = 0;
- pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
- }
-
- pScsiReq->CDBLength = cmdLen;
- pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
-
- pScsiReq->Reserved = 0;
-
- pScsiReq->MsgFlags = mpt_msg_flags();
- /* MsgContext set in mpt_get_msg_fram call */
-
- for (ii=0; ii < 8; ii++)
- pScsiReq->LUN[ii] = 0;
- pScsiReq->LUN[1] = io->lun;
-
- if (io->flags & MPT_ICFLAG_TAGGED_CMD)
- pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
- else
- pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
-
- if (cmd == REQUEST_SENSE) {
- pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
- ddvprintk((MYIOC_s_INFO_FMT "Untagged! 0x%2x\n",
- hd->ioc->name, cmd));
- }
-
- for (ii=0; ii < 16; ii++)
- pScsiReq->CDB[ii] = CDB[ii];
-
- pScsiReq->DataLength = cpu_to_le32(io->size);
- pScsiReq->SenseBufferLowAddr = cpu_to_le32(hd->ioc->sense_buf_low_dma
- + (my_idx * MPT_SENSE_BUFFER_ALLOC));
-
- ddvprintk((MYIOC_s_INFO_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
- hd->ioc->name, cmd, io->bus, io->id, io->lun));
-
- if (dir == MPI_SCSIIO_CONTROL_READ) {
- mpt_add_sge((char *) &pScsiReq->SGL,
- MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
- io->data_dma);
- } else {
- mpt_add_sge((char *) &pScsiReq->SGL,
- MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
- io->data_dma);
- }
-
- /* The ISR will free the request frame, but we need
- * the information to initialize the target. Duplicate.
- */
- memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t));
-
- /* Issue this command after:
- * finish init
- * add timer
- * Wait until the reply has been received
- * ScsiScanDvCtx callback function will
- * set hd->pLocal;
- * set scandv_wait_done and call wake_up
- */
- hd->pLocal = NULL;
- hd->timer.expires = jiffies + HZ*cmdTimeout;
- hd->scandv_wait_done = 0;
-
- /* Save cmd pointer, for resource free if timeout or
- * FW reload occurs
- */
- hd->cmdPtr = mf;
-
- add_timer(&hd->timer);
- mpt_put_msg_frame(hd->ioc->InternalCtx, hd->ioc, mf);
- wait_event(hd->scandv_waitq, hd->scandv_wait_done);
-
- if (hd->pLocal) {
- rc = hd->pLocal->completion;
- hd->pLocal->skip = 0;
-
- /* Always set fatal error codes in some cases.
- */
- if (rc == MPT_SCANDV_SELECTION_TIMEOUT)
- rc = -ENXIO;
- else if (rc == MPT_SCANDV_SOME_ERROR)
- rc = -rc;
- } else {
- rc = -EFAULT;
- /* This should never happen. */
- ddvprintk((MYIOC_s_INFO_FMT "_do_cmd: Null pLocal!!!\n",
- hd->ioc->name));
- }
-
- return rc;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_negotiate_to_asyn_narrow - Restore devices to default state
- * @hd: Pointer to a SCSI HOST structure
- * @vtarget: per device private data
- *
- * Uses the ISR, but with special processing.
- * MUST be single-threaded.
- *
- */
-static void
-mptscsih_negotiate_to_asyn_narrow(MPT_SCSI_HOST *hd, VirtTarget *vtarget)
-{
- MPT_ADAPTER *ioc= hd->ioc;
- SCSIDevicePage1_t *pcfg1Data;
- CONFIGPARMS cfg;
- dma_addr_t cfg1_dma_addr;
- ConfigPageHeader_t header;
- int id;
- int requested, configuration, data,i;
- u8 flags, factor;
-
- if (ioc->bus_type != SPI)
- return;
-
- if (!ioc->spi_data.sdp1length)
- return;
-
- pcfg1Data = (SCSIDevicePage1_t *)pci_alloc_consistent(ioc->pcidev,
- ioc->spi_data.sdp1length * 4, &cfg1_dma_addr);
-
- if (pcfg1Data == NULL)
- return;
-
- header.PageVersion = ioc->spi_data.sdp1version;
- header.PageLength = ioc->spi_data.sdp1length;
- header.PageNumber = 1;
- header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
- cfg.cfghdr.hdr = &header;
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
- cfg.timeout = 0;
-
- if (vtarget->raidVolume && ioc->raid_data.pIocPg3) {
- for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
- id = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID;
- flags = hd->ioc->spi_data.noQas;
- if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- data = hd->ioc->spi_data.nvram[id];
- if (data & MPT_NVRAM_WIDE_DISABLE)
- flags |= MPT_TARGET_NO_NEGO_WIDE;
- factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
- if ((factor == 0) || (factor == MPT_ASYNC))
- flags |= MPT_TARGET_NO_NEGO_SYNC;
- }
- mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
- &configuration, flags);
- dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
- "offset=0 negoFlags=%x request=%x config=%x\n",
- id, flags, requested, configuration));
- pcfg1Data->RequestedParameters = cpu_to_le32(requested);
- pcfg1Data->Reserved = 0;
- pcfg1Data->Configuration = cpu_to_le32(configuration);
- cfg.pageAddr = (vtarget->bus_id<<8) | id;
- mpt_config(hd->ioc, &cfg);
- }
- } else {
- flags = vtarget->negoFlags;
- mptscsih_setDevicePage1Flags(0, MPT_ASYNC, 0, &requested,
- &configuration, flags);
- dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
- "offset=0 negoFlags=%x request=%x config=%x\n",
- vtarget->target_id, flags, requested, configuration));
- pcfg1Data->RequestedParameters = cpu_to_le32(requested);
- pcfg1Data->Reserved = 0;
- pcfg1Data->Configuration = cpu_to_le32(configuration);
- cfg.pageAddr = (vtarget->bus_id<<8) | vtarget->target_id;
- mpt_config(hd->ioc, &cfg);
- }
-
- if (pcfg1Data)
- pci_free_consistent(ioc->pcidev, header.PageLength * 4, pcfg1Data, cfg1_dma_addr);
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
- * @hd: Pointer to a SCSI HOST structure
- * @vtarget: per device private data
- * @lun: lun
- *
- * Uses the ISR, but with special processing.
- * MUST be single-threaded.
- *
- */
-static void
-mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
-{
- INTERNAL_CMD iocmd;
-
- /* Following parameters will not change
- * in this routine.
- */
- iocmd.cmd = SYNCHRONIZE_CACHE;
- iocmd.flags = 0;
- iocmd.physDiskNum = -1;
- iocmd.data = NULL;
- iocmd.data_dma = -1;
- iocmd.size = 0;
- iocmd.rsvd = iocmd.rsvd2 = 0;
- iocmd.bus = vdevice->bus_id;
- iocmd.id = vdevice->target_id;
- iocmd.lun = (u8)vdevice->lun;
-
- if ((vdevice->vtarget->type & TYPE_DISK) &&
- (vdevice->configured_lun))
- mptscsih_do_cmd(hd, &iocmd);
-}
-
-/* Search IOC page 3 to determine if this is hidden physical disk
- */
-/* Search IOC page 3 to determine if this is hidden physical disk
- */
-static int
-mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
-{
- int i;
-
- if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
- return 0;
-
- for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
- if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
- return 1;
- }
-
- return 0;
-}
-
-#ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_domainValidation - Top level handler for domain validation.
- * @hd: Pointer to MPT_SCSI_HOST structure.
- *
- * Uses the ISR, but with special processing.
- * Called from schedule, should not be in interrupt mode.
- * While thread alive, do dv for all devices needing dv
- *
- * Return: None.
- */
-static void
-mptscsih_domainValidation(void *arg)
-{
- MPT_SCSI_HOST *hd;
- MPT_ADAPTER *ioc;
- unsigned long flags;
- int id, maxid, dvStatus, did;
- int ii, isPhysDisk;
-
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- dvtaskQ_active = 1;
- if (dvtaskQ_release) {
- dvtaskQ_active = 0;
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- return;
- }
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
-
- /* For this ioc, loop through all devices and do dv to each device.
- * When complete with this ioc, search through the ioc list, and
- * for each scsi ioc found, do dv for all devices. Exit when no
- * device needs dv.
- */
- did = 1;
- while (did) {
- did = 0;
- list_for_each_entry(ioc, &ioc_list, list) {
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- if (dvtaskQ_release) {
- dvtaskQ_active = 0;
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- return;
- }
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
-
- msleep(250);
-
- /* DV only to SPI adapters */
- if (ioc->bus_type != SPI)
- continue;
-
- /* Make sure everything looks ok */
- if (ioc->sh == NULL)
- continue;
-
- hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
- if (hd == NULL)
- continue;
-
- if ((ioc->spi_data.forceDv & MPT_SCSICFG_RELOAD_IOC_PG3) != 0) {
- mpt_read_ioc_pg_3(ioc);
- if (ioc->raid_data.pIocPg3) {
- Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-
- while (numPDisk) {
- if (ioc->spi_data.dvStatus[pPDisk->PhysDiskID] & MPT_SCSICFG_DV_NOT_DONE)
- ioc->spi_data.dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
-
- pPDisk++;
- numPDisk--;
- }
- }
- ioc->spi_data.forceDv &= ~MPT_SCSICFG_RELOAD_IOC_PG3;
- }
-
- maxid = min_t(int, ioc->sh->max_id, MPT_MAX_SCSI_DEVICES);
-
- for (id = 0; id < maxid; id++) {
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- if (dvtaskQ_release) {
- dvtaskQ_active = 0;
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- return;
- }
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
- dvStatus = hd->ioc->spi_data.dvStatus[id];
-
- if (dvStatus & MPT_SCSICFG_NEED_DV) {
- did++;
- hd->ioc->spi_data.dvStatus[id] |= MPT_SCSICFG_DV_PENDING;
- hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_NEED_DV;
-
- msleep(250);
-
- /* If hidden phys disk, block IO's to all
- * raid volumes
- * else, process normally
- */
- isPhysDisk = mptscsih_is_phys_disk(ioc, id);
- if (isPhysDisk) {
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- if (hd->ioc->raid_data.isRaid & (1 << ii)) {
- hd->ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_DV_PENDING;
- }
- }
- }
-
- if(mpt_alt_ioc_wait(hd->ioc)!=0) {
- ddvprintk((MYIOC_s_WARN_FMT "alt_ioc busy!\n",
- hd->ioc->name));
- continue;
- }
-
- if (mptscsih_doDv(hd, 0, id) == 1) {
- /* Untagged device was busy, try again
- */
- hd->ioc->spi_data.dvStatus[id] |= MPT_SCSICFG_NEED_DV;
- hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_PENDING;
- } else {
- /* DV is complete. Clear flags.
- */
- hd->ioc->spi_data.dvStatus[id] &= ~(MPT_SCSICFG_DV_NOT_DONE | MPT_SCSICFG_DV_PENDING);
- }
-
- spin_lock(&hd->ioc->initializing_hba_lock);
- hd->ioc->initializing_hba_lock_flag=0;
- spin_unlock(&hd->ioc->initializing_hba_lock);
-
- if (isPhysDisk) {
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- if (hd->ioc->raid_data.isRaid & (1 << ii)) {
- hd->ioc->spi_data.dvStatus[ii] &= ~MPT_SCSICFG_DV_PENDING;
- }
- }
- }
-
- if (hd->ioc->spi_data.noQas)
- mptscsih_qas_check(hd, id);
- }
- }
- }
- }
-
- spin_lock_irqsave(&dvtaskQ_lock, flags);
- dvtaskQ_active = 0;
- spin_unlock_irqrestore(&dvtaskQ_lock, flags);
-
- return;
-}
-
-/* Write SDP1 if no QAS has been enabled
- */
-static void
-mptscsih_qas_check(MPT_SCSI_HOST *hd, int id)
-{
- VirtTarget *vtarget;
- int ii;
-
- if (hd->Targets == NULL)
- return;
-
- for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
- if (ii == id)
- continue;
-
- if ((hd->ioc->spi_data.dvStatus[ii] & MPT_SCSICFG_DV_NOT_DONE) != 0)
- continue;
-
- vtarget = hd->Targets[ii];
-
- if ((vtarget != NULL) && (!vtarget->raidVolume)) {
- if ((vtarget->negoFlags & hd->ioc->spi_data.noQas) == 0) {
- vtarget->negoFlags |= hd->ioc->spi_data.noQas;
- dnegoprintk(("writeSDP1: id=%d flags=0\n", id));
- mptscsih_writeSDP1(hd, 0, ii, 0);
- }
- } else {
- if (mptscsih_is_phys_disk(hd->ioc, ii) == 1) {
- dnegoprintk(("writeSDP1: id=%d SCSICFG_USE_NVRAM\n", id));
- mptscsih_writeSDP1(hd, 0, ii, MPT_SCSICFG_USE_NVRAM);
- }
- }
- }
- return;
-}
-
-
-
-#define MPT_GET_NVRAM_VALS 0x01
-#define MPT_UPDATE_MAX 0x02
-#define MPT_SET_MAX 0x04
-#define MPT_SET_MIN 0x08
-#define MPT_FALLBACK 0x10
-#define MPT_SAVE 0x20
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_doDv - Perform domain validation to a target.
- * @hd: Pointer to MPT_SCSI_HOST structure.
- * @portnum: IOC port number.
- * @target: Physical ID of this target
- *
- * Uses the ISR, but with special processing.
- * MUST be single-threaded.
- * Test will exit if target is at async & narrow.
- *
- * Return: None.
- */
-static int
-mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- VirtTarget *vtarget;
- SCSIDevicePage1_t *pcfg1Data;
- SCSIDevicePage0_t *pcfg0Data;
- u8 *pbuf1;
- u8 *pbuf2;
- u8 *pDvBuf;
- dma_addr_t dvbuf_dma = -1;
- dma_addr_t buf1_dma = -1;
- dma_addr_t buf2_dma = -1;
- dma_addr_t cfg1_dma_addr = -1;
- dma_addr_t cfg0_dma_addr = -1;
- ConfigPageHeader_t header1;
- ConfigPageHeader_t header0;
- DVPARAMETERS dv;
- INTERNAL_CMD iocmd;
- CONFIGPARMS cfg;
- int dv_alloc = 0;
- int rc, sz = 0;
- int bufsize = 0;
- int dataBufSize = 0;
- int echoBufSize = 0;
- int notDone;
- int patt;
- int repeat;
- int retcode = 0;
- int nfactor = MPT_ULTRA320;
- char firstPass = 1;
- char doFallback = 0;
- char readPage0;
- char bus, lun;
- char inq0 = 0;
-
- if (ioc->spi_data.sdp1length == 0)
- return 0;
-
- if (ioc->spi_data.sdp0length == 0)
- return 0;
-
- /* If multiple buses are used, require that the initiator
- * id be the same on all buses.
- */
- if (id == ioc->pfacts[0].PortSCSIID)
- return 0;
-
- lun = 0;
- bus = (u8) bus_number;
- ddvtprintk((MYIOC_s_NOTE_FMT
- "DV started: bus=%d, id=%d dv @ %p\n",
- ioc->name, bus, id, &dv));
-
- /* Prep DV structure
- */
- memset (&dv, 0, sizeof(DVPARAMETERS));
- dv.id = id;
-
- /* Populate tmax with the current maximum
- * transfer parameters for this target.
- * Exit if narrow and async.
- */
- dv.cmd = MPT_GET_NVRAM_VALS;
- mptscsih_dv_parms(hd, &dv, NULL);
-
- /* Prep SCSI IO structure
- */
- iocmd.id = id;
- iocmd.bus = bus;
- iocmd.lun = lun;
- iocmd.flags = 0;
- iocmd.physDiskNum = -1;
- iocmd.rsvd = iocmd.rsvd2 = 0;
-
- vtarget = hd->Targets[id];
-
- /* Use tagged commands if possible.
- */
- if (vtarget) {
- if (vtarget->tflags & MPT_TARGET_FLAGS_Q_YES)
- iocmd.flags |= MPT_ICFLAG_TAGGED_CMD;
- else {
- if (hd->ioc->facts.FWVersion.Word < 0x01000600)
- return 0;
-
- if ((hd->ioc->facts.FWVersion.Word >= 0x01010000) &&
- (hd->ioc->facts.FWVersion.Word < 0x01010B00))
- return 0;
- }
- }
-
- /* Prep cfg structure
- */
- cfg.pageAddr = (bus<<8) | id;
- cfg.cfghdr.hdr = NULL;
-
- /* Prep SDP0 header
- */
- header0.PageVersion = ioc->spi_data.sdp0version;
- header0.PageLength = ioc->spi_data.sdp0length;
- header0.PageNumber = 0;
- header0.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
-
- /* Prep SDP1 header
- */
- header1.PageVersion = ioc->spi_data.sdp1version;
- header1.PageLength = ioc->spi_data.sdp1length;
- header1.PageNumber = 1;
- header1.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
-
- if (header0.PageLength & 1)
- dv_alloc = (header0.PageLength * 4) + 4;
-
- dv_alloc += (2048 + (header1.PageLength * 4));
-
- pDvBuf = pci_alloc_consistent(ioc->pcidev, dv_alloc, &dvbuf_dma);
- if (pDvBuf == NULL)
- return 0;
-
- sz = 0;
- pbuf1 = (u8 *)pDvBuf;
- buf1_dma = dvbuf_dma;
- sz +=1024;
-
- pbuf2 = (u8 *) (pDvBuf + sz);
- buf2_dma = dvbuf_dma + sz;
- sz +=1024;
-
- pcfg0Data = (SCSIDevicePage0_t *) (pDvBuf + sz);
- cfg0_dma_addr = dvbuf_dma + sz;
- sz += header0.PageLength * 4;
-
- /* 8-byte alignment
- */
- if (header0.PageLength & 1)
- sz += 4;
-
- pcfg1Data = (SCSIDevicePage1_t *) (pDvBuf + sz);
- cfg1_dma_addr = dvbuf_dma + sz;
-
- /* Skip this ID? Set cfg.cfghdr.hdr to force config page write
- */
- {
- SpiCfgData *pspi_data = &hd->ioc->spi_data;
- if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- /* Set the factor from nvram */
- nfactor = (pspi_data->nvram[id] & MPT_NVRAM_SYNC_MASK) >> 8;
- if (nfactor < pspi_data->minSyncFactor )
- nfactor = pspi_data->minSyncFactor;
-
- if (!(pspi_data->nvram[id] & MPT_NVRAM_ID_SCAN_ENABLE) ||
- (pspi_data->PortFlags == MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV) ) {
-
- ddvprintk((MYIOC_s_NOTE_FMT "DV Skipped: bus, id, lun (%d, %d, %d)\n",
- ioc->name, bus, id, lun));
-
- dv.cmd = MPT_SET_MAX;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
- cfg.cfghdr.hdr = &header1;
-
- /* Save the final negotiated settings to
- * SCSI device page 1.
- */
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
- mpt_config(hd->ioc, &cfg);
- goto target_done;
- }
- }
- }
-
- /* Finish iocmd inititialization - hidden or visible disk? */
- if (ioc->raid_data.pIocPg3) {
- /* Search IOC page 3 for matching id
- */
- Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-
- while (numPDisk) {
- if (pPDisk->PhysDiskID == id) {
- /* match */
- iocmd.flags |= MPT_ICFLAG_PHYS_DISK;
- iocmd.physDiskNum = pPDisk->PhysDiskNum;
-
- /* Quiesce the IM
- */
- if (mptscsih_do_raid(hd, MPI_RAID_ACTION_QUIESCE_PHYS_IO, &iocmd) < 0) {
- ddvprintk((MYIOC_s_ERR_FMT "RAID Queisce FAILED!\n", ioc->name));
- goto target_done;
- }
- break;
- }
- pPDisk++;
- numPDisk--;
- }
- }
-
- /* RAID Volume ID's may double for a physical device. If RAID but
- * not a physical ID as well, skip DV.
- */
- if ((hd->ioc->raid_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK))
- goto target_done;
-
-
- /* Basic Test.
- * Async & Narrow - Inquiry
- * Async & Narrow - Inquiry
- * Maximum transfer rate - Inquiry
- * Compare buffers:
- * If compare, test complete.
- * If miscompare and first pass, repeat
- * If miscompare and not first pass, fall back and repeat
- */
- hd->pLocal = NULL;
- readPage0 = 0;
- sz = SCSI_MAX_INQUIRY_BYTES;
- rc = MPT_SCANDV_GOOD;
- while (1) {
- ddvprintk((MYIOC_s_NOTE_FMT "DV: Start Basic test on id=%d\n", ioc->name, id));
- retcode = 0;
- dv.cmd = MPT_SET_MIN;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- cfg.cfghdr.hdr = &header1;
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- /* Wide - narrow - wide workaround case
- */
- if ((rc == MPT_SCANDV_ISSUE_SENSE) && dv.max.width) {
- /* Send an untagged command to reset disk Qs corrupted
- * when a parity error occurs on a Request Sense.
- */
- if ((hd->ioc->facts.FWVersion.Word >= 0x01000600) ||
- ((hd->ioc->facts.FWVersion.Word >= 0x01010000) &&
- (hd->ioc->facts.FWVersion.Word < 0x01010B00)) ) {
-
- iocmd.cmd = REQUEST_SENSE;
- iocmd.data_dma = buf1_dma;
- iocmd.data = pbuf1;
- iocmd.size = 0x12;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else {
- if (hd->pLocal == NULL)
- goto target_done;
- rc = hd->pLocal->completion;
- if ((rc == MPT_SCANDV_GOOD) || (rc == MPT_SCANDV_SENSE)) {
- dv.max.width = 0;
- doFallback = 0;
- } else
- goto target_done;
- }
- } else
- goto target_done;
- }
-
- iocmd.cmd = INQUIRY;
- iocmd.data_dma = buf1_dma;
- iocmd.data = pbuf1;
- iocmd.size = sz;
- memset(pbuf1, 0x00, sz);
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else {
- if (hd->pLocal == NULL)
- goto target_done;
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD) {
- if (hd->pLocal->scsiStatus == SAM_STAT_BUSY) {
- if ((iocmd.flags & MPT_ICFLAG_TAGGED_CMD) == 0)
- retcode = 1;
- else
- retcode = 0;
-
- goto target_done;
- }
- } else if (rc == MPT_SCANDV_SENSE) {
- ;
- } else {
- /* If first command doesn't complete
- * with a good status or with a check condition,
- * exit.
- */
- goto target_done;
- }
- }
-
- /* Reset the size for disks
- */
- inq0 = (*pbuf1) & 0x1F;
- if ((inq0 == 0) && vtarget && !vtarget->raidVolume) {
- sz = 0x40;
- iocmd.size = sz;
- }
-
- /* Another GEM workaround. Check peripheral device type,
- * if PROCESSOR, quit DV.
- */
- if (inq0 == TYPE_PROCESSOR) {
- mptscsih_initTarget(hd,
- vtarget,
- lun,
- pbuf1,
- sz);
- goto target_done;
- }
-
- if (inq0 > 0x08)
- goto target_done;
-
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
-
- if (sz == 0x40) {
- if ((vtarget->maxWidth == 1) && (vtarget->maxOffset) && (nfactor < 0x0A)
- && (vtarget->minSyncFactor > 0x09)) {
- if ((pbuf1[56] & 0x04) == 0)
- ;
- else if ((pbuf1[56] & 0x01) == 1) {
- vtarget->minSyncFactor =
- nfactor > MPT_ULTRA320 ? nfactor : MPT_ULTRA320;
- } else {
- vtarget->minSyncFactor =
- nfactor > MPT_ULTRA160 ? nfactor : MPT_ULTRA160;
- }
-
- dv.max.factor = vtarget->minSyncFactor;
-
- if ((pbuf1[56] & 0x02) == 0) {
- vtarget->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
- hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
- ddvprintk((MYIOC_s_NOTE_FMT
- "DV: Start Basic noQas on id=%d due to pbuf1[56]=%x\n",
- ioc->name, id, pbuf1[56]));
- }
- }
- }
-
- if (doFallback)
- dv.cmd = MPT_FALLBACK;
- else
- dv.cmd = MPT_SET_MAX;
-
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- if ((!dv.now.width) && (!dv.now.offset))
- goto target_done;
-
- iocmd.cmd = INQUIRY;
- iocmd.data_dma = buf2_dma;
- iocmd.data = pbuf2;
- iocmd.size = sz;
- memset(pbuf2, 0x00, sz);
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- /* Save the return code.
- * If this is the first pass,
- * read SCSI Device Page 0
- * and update the target max parameters.
- */
- rc = hd->pLocal->completion;
- doFallback = 0;
- if (rc == MPT_SCANDV_GOOD) {
- if (!readPage0) {
- u32 sdp0_info;
- u32 sdp0_nego;
-
- cfg.cfghdr.hdr = &header0;
- cfg.physAddr = cfg0_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
- cfg.dir = 0;
-
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- sdp0_info = le32_to_cpu(pcfg0Data->Information) & 0x0E;
- sdp0_nego = (le32_to_cpu(pcfg0Data->NegotiatedParameters) & 0xFF00 ) >> 8;
-
- /* Quantum and Fujitsu workarounds.
- * Quantum: PPR U320 -> PPR reply with Ultra2 and wide
- * Fujitsu: PPR U320 -> Msg Reject and Ultra2 and wide
- * Resetart with a request for U160.
- */
- if ((dv.now.factor == MPT_ULTRA320) && (sdp0_nego == MPT_ULTRA2)) {
- doFallback = 1;
- } else {
- dv.cmd = MPT_UPDATE_MAX;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg0Data);
- /* Update the SCSI device page 1 area
- */
- pcfg1Data->RequestedParameters = pcfg0Data->NegotiatedParameters;
- readPage0 = 1;
- }
- }
-
- /* Quantum workaround. Restart this test will the fallback
- * flag set.
- */
- if (doFallback == 0) {
- if (memcmp(pbuf1, pbuf2, sz) != 0) {
- if (!firstPass)
- doFallback = 1;
- } else {
- ddvprintk((MYIOC_s_NOTE_FMT
- "DV:Inquiry compared id=%d, calling initTarget\n", ioc->name, id));
- hd->ioc->spi_data.dvStatus[id] &= ~MPT_SCSICFG_DV_NOT_DONE;
- mptscsih_initTarget(hd,
- vtarget,
- lun,
- pbuf1,
- sz);
- break; /* test complete */
- }
- }
-
-
- } else if (rc == MPT_SCANDV_ISSUE_SENSE)
- doFallback = 1; /* set fallback flag */
- else if ((rc == MPT_SCANDV_DID_RESET) ||
- (rc == MPT_SCANDV_SENSE) ||
- (rc == MPT_SCANDV_FALLBACK))
- doFallback = 1; /* set fallback flag */
- else
- goto target_done;
-
- firstPass = 0;
- }
- }
- ddvprintk((MYIOC_s_NOTE_FMT "DV: Basic test on id=%d completed OK.\n", ioc->name, id));
-
- if (ioc->spi_data.mpt_dv == 0)
- goto target_done;
-
- inq0 = (*pbuf1) & 0x1F;
-
- /* Continue only for disks
- */
- if (inq0 != 0)
- goto target_done;
-
- if ( ioc->spi_data.PortFlags == MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY )
- goto target_done;
-
- /* Start the Enhanced Test.
- * 0) issue TUR to clear out check conditions
- * 1) read capacity of echo (regular) buffer
- * 2) reserve device
- * 3) do write-read-compare data pattern test
- * 4) release
- * 5) update nego parms to target struct
- */
- cfg.cfghdr.hdr = &header1;
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
-
- iocmd.cmd = TEST_UNIT_READY;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- notDone = 1;
- while (notDone) {
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
-
- if (hd->pLocal == NULL)
- goto target_done;
-
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD)
- notDone = 0;
- else if (rc == MPT_SCANDV_SENSE) {
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- u8 asc = hd->pLocal->sense[12];
- u8 ascq = hd->pLocal->sense[13];
- ddvprintk((MYIOC_s_INFO_FMT
- "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
- ioc->name, skey, asc, ascq));
-
- if (skey == UNIT_ATTENTION)
- notDone++; /* repeat */
- else if ((skey == NOT_READY) &&
- (asc == 0x04)&&(ascq == 0x01)) {
- /* wait then repeat */
- mdelay (2000);
- notDone++;
- } else if ((skey == NOT_READY) && (asc == 0x3A)) {
- /* no medium, try read test anyway */
- notDone = 0;
- } else {
- /* All other errors are fatal.
- */
- ddvprintk((MYIOC_s_INFO_FMT "DV: fatal error.",
- ioc->name));
- goto target_done;
- }
- } else
- goto target_done;
- }
-
- iocmd.cmd = READ_BUFFER;
- iocmd.data_dma = buf1_dma;
- iocmd.data = pbuf1;
- iocmd.size = 4;
- iocmd.flags |= MPT_ICFLAG_BUF_CAP;
-
- dataBufSize = 0;
- echoBufSize = 0;
- for (patt = 0; patt < 2; patt++) {
- if (patt == 0)
- iocmd.flags |= MPT_ICFLAG_ECHO;
- else
- iocmd.flags &= ~MPT_ICFLAG_ECHO;
-
- notDone = 1;
- while (notDone) {
- bufsize = 0;
-
- /* If not ready after 8 trials,
- * give up on this device.
- */
- if (notDone > 8)
- goto target_done;
-
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- ddvprintk(("ReadBuffer Comp Code %d", rc));
- ddvprintk((" buff: %0x %0x %0x %0x\n",
- pbuf1[0], pbuf1[1], pbuf1[2], pbuf1[3]));
-
- if (rc == MPT_SCANDV_GOOD) {
- notDone = 0;
- if (iocmd.flags & MPT_ICFLAG_ECHO) {
- bufsize = ((pbuf1[2] & 0x1F) <<8) | pbuf1[3];
- if (pbuf1[0] & 0x01)
- iocmd.flags |= MPT_ICFLAG_EBOS;
- } else {
- bufsize = pbuf1[1]<<16 | pbuf1[2]<<8 | pbuf1[3];
- }
- } else if (rc == MPT_SCANDV_SENSE) {
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- u8 asc = hd->pLocal->sense[12];
- u8 ascq = hd->pLocal->sense[13];
- ddvprintk((MYIOC_s_INFO_FMT
- "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
- ioc->name, skey, asc, ascq));
- if (skey == ILLEGAL_REQUEST) {
- notDone = 0;
- } else if (skey == UNIT_ATTENTION) {
- notDone++; /* repeat */
- } else if ((skey == NOT_READY) &&
- (asc == 0x04)&&(ascq == 0x01)) {
- /* wait then repeat */
- mdelay (2000);
- notDone++;
- } else {
- /* All other errors are fatal.
- */
- ddvprintk((MYIOC_s_INFO_FMT "DV: fatal error.",
- ioc->name));
- goto target_done;
- }
- } else {
- /* All other errors are fatal
- */
- goto target_done;
- }
- }
- }
-
- if (iocmd.flags & MPT_ICFLAG_ECHO)
- echoBufSize = bufsize;
- else
- dataBufSize = bufsize;
- }
- sz = 0;
- iocmd.flags &= ~MPT_ICFLAG_BUF_CAP;
-
- /* Use echo buffers if possible,
- * Exit if both buffers are 0.
- */
- if (echoBufSize > 0) {
- iocmd.flags |= MPT_ICFLAG_ECHO;
- if (dataBufSize > 0)
- bufsize = min(echoBufSize, dataBufSize);
- else
- bufsize = echoBufSize;
- } else if (dataBufSize == 0)
- goto target_done;
-
- ddvprintk((MYIOC_s_INFO_FMT "%s Buffer Capacity %d\n", ioc->name,
- (iocmd.flags & MPT_ICFLAG_ECHO) ? "Echo" : " ", bufsize));
-
- /* Data buffers for write-read-compare test max 1K.
- */
- sz = min(bufsize, 1024);
-
- /* --- loop ----
- * On first pass, always issue a reserve.
- * On additional loops, only if a reset has occurred.
- * iocmd.flags indicates if echo or regular buffer
- */
- for (patt = 0; patt < 4; patt++) {
- ddvprintk(("Pattern %d\n", patt));
- if ((iocmd.flags & MPT_ICFLAG_RESERVED) && (iocmd.flags & MPT_ICFLAG_DID_RESET)) {
- iocmd.cmd = TEST_UNIT_READY;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
-
- iocmd.cmd = RELEASE;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- ddvprintk(("Release rc %d\n", rc));
- if (rc == MPT_SCANDV_GOOD)
- iocmd.flags &= ~MPT_ICFLAG_RESERVED;
- else
- goto target_done;
- }
- iocmd.flags &= ~MPT_ICFLAG_RESERVED;
- }
- iocmd.flags &= ~MPT_ICFLAG_DID_RESET;
-
- if (iocmd.flags & MPT_ICFLAG_EBOS)
- goto skip_Reserve;
-
- repeat = 5;
- while (repeat && (!(iocmd.flags & MPT_ICFLAG_RESERVED))) {
- iocmd.cmd = RESERVE;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD) {
- iocmd.flags |= MPT_ICFLAG_RESERVED;
- } else if (rc == MPT_SCANDV_SENSE) {
- /* Wait if coming ready
- */
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- u8 asc = hd->pLocal->sense[12];
- u8 ascq = hd->pLocal->sense[13];
- ddvprintk((MYIOC_s_INFO_FMT
- "DV: Reserve Failed: ", ioc->name));
- ddvprintk(("SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n",
- skey, asc, ascq));
-
- if ((skey == NOT_READY) && (asc == 0x04)&&
- (ascq == 0x01)) {
- /* wait then repeat */
- mdelay (2000);
- notDone++;
- } else {
- ddvprintk((MYIOC_s_INFO_FMT
- "DV: Reserved Failed.", ioc->name));
- goto target_done;
- }
- } else {
- ddvprintk((MYIOC_s_INFO_FMT "DV: Reserved Failed.",
- ioc->name));
- goto target_done;
- }
- }
- }
-
-skip_Reserve:
- mptscsih_fillbuf(pbuf1, sz, patt, 1);
- iocmd.cmd = WRITE_BUFFER;
- iocmd.data_dma = buf1_dma;
- iocmd.data = pbuf1;
- iocmd.size = sz;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD)
- ; /* Issue read buffer */
- else if (rc == MPT_SCANDV_DID_RESET) {
- /* If using echo buffers, reset to data buffers.
- * Else do Fallback and restart
- * this test (re-issue reserve
- * because of bus reset).
- */
- if ((iocmd.flags & MPT_ICFLAG_ECHO) && (dataBufSize >= bufsize)) {
- iocmd.flags &= ~MPT_ICFLAG_ECHO;
- } else {
- dv.cmd = MPT_FALLBACK;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- if ((!dv.now.width) && (!dv.now.offset))
- goto target_done;
- }
-
- iocmd.flags |= MPT_ICFLAG_DID_RESET;
- patt = -1;
- continue;
- } else if (rc == MPT_SCANDV_SENSE) {
- /* Restart data test if UA, else quit.
- */
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- ddvprintk((MYIOC_s_INFO_FMT
- "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", ioc->name, skey,
- hd->pLocal->sense[12], hd->pLocal->sense[13]));
- if (skey == UNIT_ATTENTION) {
- patt = -1;
- continue;
- } else if (skey == ILLEGAL_REQUEST) {
- if (iocmd.flags & MPT_ICFLAG_ECHO) {
- if (dataBufSize >= bufsize) {
- iocmd.flags &= ~MPT_ICFLAG_ECHO;
- patt = -1;
- continue;
- }
- }
- goto target_done;
- }
- else
- goto target_done;
- } else {
- /* fatal error */
- goto target_done;
- }
- }
-
- iocmd.cmd = READ_BUFFER;
- iocmd.data_dma = buf2_dma;
- iocmd.data = pbuf2;
- iocmd.size = sz;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- goto target_done;
- else if (hd->pLocal == NULL)
- goto target_done;
- else {
- rc = hd->pLocal->completion;
- if (rc == MPT_SCANDV_GOOD) {
- /* If buffers compare,
- * go to next pattern,
- * else, do a fallback and restart
- * data transfer test.
- */
- if (memcmp (pbuf1, pbuf2, sz) == 0) {
- ; /* goto next pattern */
- } else {
- /* Miscompare with Echo buffer, go to data buffer,
- * if that buffer exists.
- * Miscompare with Data buffer, check first 4 bytes,
- * some devices return capacity. Exit in this case.
- */
- if (iocmd.flags & MPT_ICFLAG_ECHO) {
- if (dataBufSize >= bufsize)
- iocmd.flags &= ~MPT_ICFLAG_ECHO;
- else
- goto target_done;
- } else {
- if (dataBufSize == (pbuf2[1]<<16 | pbuf2[2]<<8 | pbuf2[3])) {
- /* Argh. Device returning wrong data.
- * Quit DV for this device.
- */
- goto target_done;
- }
-
- /* Had an actual miscompare. Slow down.*/
- dv.cmd = MPT_FALLBACK;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- if ((!dv.now.width) && (!dv.now.offset))
- goto target_done;
- }
-
- patt = -1;
- continue;
- }
- } else if (rc == MPT_SCANDV_DID_RESET) {
- /* Do Fallback and restart
- * this test (re-issue reserve
- * because of bus reset).
- */
- dv.cmd = MPT_FALLBACK;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- if (mpt_config(hd->ioc, &cfg) != 0)
- goto target_done;
-
- if ((!dv.now.width) && (!dv.now.offset))
- goto target_done;
-
- iocmd.flags |= MPT_ICFLAG_DID_RESET;
- patt = -1;
- continue;
- } else if (rc == MPT_SCANDV_SENSE) {
- /* Restart data test if UA, else quit.
- */
- u8 skey = hd->pLocal->sense[2] & 0x0F;
- ddvprintk((MYIOC_s_INFO_FMT
- "SenseKey:ASC:ASCQ = (%x:%02x:%02x)\n", ioc->name, skey,
- hd->pLocal->sense[12], hd->pLocal->sense[13]));
- if (skey == UNIT_ATTENTION) {
- patt = -1;
- continue;
- }
- else
- goto target_done;
- } else {
- /* fatal error */
- goto target_done;
- }
- }
-
- } /* --- end of patt loop ---- */
-
-target_done:
- if (iocmd.flags & MPT_ICFLAG_RESERVED) {
- iocmd.cmd = RELEASE;
- iocmd.data_dma = -1;
- iocmd.data = NULL;
- iocmd.size = 0;
- if (mptscsih_do_cmd(hd, &iocmd) < 0)
- printk(MYIOC_s_INFO_FMT "DV: Release failed. id %d",
- ioc->name, id);
- else if (hd->pLocal) {
- if (hd->pLocal->completion == MPT_SCANDV_GOOD)
- iocmd.flags &= ~MPT_ICFLAG_RESERVED;
- } else {
- printk(MYIOC_s_INFO_FMT "DV: Release failed. id %d",
- ioc->name, id);
- }
- }
-
-
- /* Set if cfg1_dma_addr contents is valid
- */
- if ((cfg.cfghdr.hdr != NULL) && (retcode == 0)){
- /* If disk, not U320, disable QAS
- */
- if ((inq0 == 0) && (dv.now.factor > MPT_ULTRA320)) {
- hd->ioc->spi_data.noQas = MPT_TARGET_NO_NEGO_QAS;
- ddvprintk((MYIOC_s_NOTE_FMT
- "noQas set due to id=%d has factor=%x\n", ioc->name, id, dv.now.factor));
- }
-
- dv.cmd = MPT_SAVE;
- mptscsih_dv_parms(hd, &dv, (void *)pcfg1Data);
-
- /* Double writes to SDP1 can cause problems,
- * skip save of the final negotiated settings to
- * SCSI device page 1.
- *
- cfg.cfghdr.hdr = &header1;
- cfg.physAddr = cfg1_dma_addr;
- cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
- cfg.dir = 1;
- mpt_config(hd->ioc, &cfg);
- */
- }
-
- /* If this is a RAID Passthrough, enable internal IOs
- */
- if (iocmd.flags & MPT_ICFLAG_PHYS_DISK) {
- if (mptscsih_do_raid(hd, MPI_RAID_ACTION_ENABLE_PHYS_IO, &iocmd) < 0)
- ddvprintk((MYIOC_s_ERR_FMT "RAID Enable FAILED!\n", ioc->name));
- }
-
- /* Done with the DV scan of the current target
- */
- if (pDvBuf)
- pci_free_consistent(ioc->pcidev, dv_alloc, pDvBuf, dvbuf_dma);
-
- ddvtprintk((MYIOC_s_INFO_FMT "DV Done id=%d\n",
- ioc->name, id));
-
- return retcode;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_dv_parms - perform a variety of operations on the
- * parameters used for negotiation.
- * @hd: Pointer to a SCSI host.
- * @dv: Pointer to a structure that contains the maximum and current
- * negotiated parameters.
- */
-static void
-mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
-{
- VirtTarget *vtarget;
- SCSIDevicePage0_t *pPage0;
- SCSIDevicePage1_t *pPage1;
- int val = 0, data, configuration;
- u8 width = 0;
- u8 offset = 0;
- u8 factor = 0;
- u8 negoFlags = 0;
- u8 cmd = dv->cmd;
- u8 id = dv->id;
-
- switch (cmd) {
- case MPT_GET_NVRAM_VALS:
- ddvprintk((MYIOC_s_NOTE_FMT "Getting NVRAM: ",
- hd->ioc->name));
- /* Get the NVRAM values and save in tmax
- * If not an LVD bus, the adapter minSyncFactor has been
- * already throttled back.
- */
- negoFlags = hd->ioc->spi_data.noQas;
- if ((hd->Targets)&&((vtarget = hd->Targets[(int)id]) != NULL) && !vtarget->raidVolume) {
- width = vtarget->maxWidth;
- offset = vtarget->maxOffset;
- factor = vtarget->minSyncFactor;
- negoFlags |= vtarget->negoFlags;
- } else {
- if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
- data = hd->ioc->spi_data.nvram[id];
- width = data & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
- if ((offset = hd->ioc->spi_data.maxSyncOffset) == 0)
- factor = MPT_ASYNC;
- else {
- factor = (data & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
- if ((factor == 0) || (factor == MPT_ASYNC)){
- factor = MPT_ASYNC;
- offset = 0;
- }
- }
- } else {
- width = MPT_NARROW;
- offset = 0;
- factor = MPT_ASYNC;
- }
-
- /* Set the negotiation flags */
- if (!width)
- negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
-
- if (!offset)
- negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
- }
-
- /* limit by adapter capabilities */
- width = min(width, hd->ioc->spi_data.maxBusWidth);
- offset = min(offset, hd->ioc->spi_data.maxSyncOffset);
- factor = max(factor, hd->ioc->spi_data.minSyncFactor);
-
- /* Check Consistency */
- if (offset && (factor < MPT_ULTRA2) && !width)
- factor = MPT_ULTRA2;
-
- dv->max.width = width;
- dv->max.offset = offset;
- dv->max.factor = factor;
- dv->max.flags = negoFlags;
- ddvprintk((" id=%d width=%d factor=%x offset=%x flags=%x\n",
- id, width, factor, offset, negoFlags));
- break;
-
- case MPT_UPDATE_MAX:
- ddvprintk((MYIOC_s_NOTE_FMT
- "Updating with SDP0 Data: ", hd->ioc->name));
- /* Update tmax values with those from Device Page 0.*/
- pPage0 = (SCSIDevicePage0_t *) pPage;
- if (pPage0) {
- val = le32_to_cpu(pPage0->NegotiatedParameters);
- dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
- dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
- dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
- }
-
- dv->now.width = dv->max.width;
- dv->now.offset = dv->max.offset;
- dv->now.factor = dv->max.factor;
- ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x\n",
- id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags));
- break;
-
- case MPT_SET_MAX:
- ddvprintk((MYIOC_s_NOTE_FMT "Setting Max: ",
- hd->ioc->name));
- /* Set current to the max values. Update the config page.*/
- dv->now.width = dv->max.width;
- dv->now.offset = dv->max.offset;
- dv->now.factor = dv->max.factor;
- dv->now.flags = dv->max.flags;
-
- pPage1 = (SCSIDevicePage1_t *)pPage;
- if (pPage1) {
- mptscsih_setDevicePage1Flags (dv->now.width, dv->now.factor,
- dv->now.offset, &val, &configuration, dv->now.flags);
- dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
- id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
- pPage1->RequestedParameters = cpu_to_le32(val);
- pPage1->Reserved = 0;
- pPage1->Configuration = cpu_to_le32(configuration);
- }
-
- ddvprintk(("id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x configuration=%x\n",
- id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
- break;
-
- case MPT_SET_MIN:
- ddvprintk((MYIOC_s_NOTE_FMT "Setting Min: ",
- hd->ioc->name));
- /* Set page to asynchronous and narrow
- * Do not update now, breaks fallback routine. */
- width = MPT_NARROW;
- offset = 0;
- factor = MPT_ASYNC;
- negoFlags = dv->max.flags;
-
- pPage1 = (SCSIDevicePage1_t *)pPage;
- if (pPage1) {
- mptscsih_setDevicePage1Flags (width, factor,
- offset, &val, &configuration, negoFlags);
- dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
- id, width, factor, offset, negoFlags, val, configuration));
- pPage1->RequestedParameters = cpu_to_le32(val);
- pPage1->Reserved = 0;
- pPage1->Configuration = cpu_to_le32(configuration);
- }
- ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n",
- id, width, factor, offset, val, configuration, negoFlags));
- break;
-
- case MPT_FALLBACK:
- ddvprintk((MYIOC_s_NOTE_FMT
- "Fallback: Start: offset %d, factor %x, width %d \n",
- hd->ioc->name, dv->now.offset,
- dv->now.factor, dv->now.width));
- width = dv->now.width;
- offset = dv->now.offset;
- factor = dv->now.factor;
- if ((offset) && (dv->max.width)) {
- if (factor < MPT_ULTRA160)
- factor = MPT_ULTRA160;
- else if (factor < MPT_ULTRA2) {
- factor = MPT_ULTRA2;
- width = MPT_WIDE;
- } else if ((factor == MPT_ULTRA2) && width) {
- factor = MPT_ULTRA2;
- width = MPT_NARROW;
- } else if (factor < MPT_ULTRA) {
- factor = MPT_ULTRA;
- width = MPT_WIDE;
- } else if ((factor == MPT_ULTRA) && width) {
- width = MPT_NARROW;
- } else if (factor < MPT_FAST) {
- factor = MPT_FAST;
- width = MPT_WIDE;
- } else if ((factor == MPT_FAST) && width) {
- factor = MPT_FAST;
- width = MPT_NARROW;
- } else if (factor < MPT_SCSI) {
- factor = MPT_SCSI;
- width = MPT_WIDE;
- } else if ((factor == MPT_SCSI) && width) {
- factor = MPT_SCSI;
- width = MPT_NARROW;
- } else {
- factor = MPT_ASYNC;
- offset = 0;
- }
-
- } else if (offset) {
- width = MPT_NARROW;
- if (factor < MPT_ULTRA)
- factor = MPT_ULTRA;
- else if (factor < MPT_FAST)
- factor = MPT_FAST;
- else if (factor < MPT_SCSI)
- factor = MPT_SCSI;
- else {
- factor = MPT_ASYNC;
- offset = 0;
- }
-
- } else {
- width = MPT_NARROW;
- factor = MPT_ASYNC;
- }
- dv->max.flags |= MPT_TARGET_NO_NEGO_QAS;
- dv->max.flags &= ~MPT_TAPE_NEGO_IDP;
-
- dv->now.width = width;
- dv->now.offset = offset;
- dv->now.factor = factor;
- dv->now.flags = dv->max.flags;
-
- pPage1 = (SCSIDevicePage1_t *)pPage;
- if (pPage1) {
- mptscsih_setDevicePage1Flags (width, factor, offset, &val,
- &configuration, dv->now.flags);
- dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
- id, width, offset, factor, dv->now.flags, val, configuration));
-
- pPage1->RequestedParameters = cpu_to_le32(val);
- pPage1->Reserved = 0;
- pPage1->Configuration = cpu_to_le32(configuration);
- }
-
- ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n",
- id, dv->now.offset, dv->now.factor, dv->now.width, val, configuration));
- break;
-
- case MPT_SAVE:
- ddvprintk((MYIOC_s_NOTE_FMT
- "Saving to Target structure: ", hd->ioc->name));
- ddvprintk(("id=%d width=%x factor=%x offset=%d flags=%x\n",
- id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags));
-
- /* Save these values to target structures
- * or overwrite nvram (phys disks only).
- */
-
- if ((hd->Targets)&&((vtarget = hd->Targets[(int)id]) != NULL) && !vtarget->raidVolume ) {
- vtarget->maxWidth = dv->now.width;
- vtarget->maxOffset = dv->now.offset;
- vtarget->minSyncFactor = dv->now.factor;
- vtarget->negoFlags = dv->now.flags;
- } else {
- /* Preserv all flags, use
- * read-modify-write algorithm
- */
- if (hd->ioc->spi_data.nvram) {
- data = hd->ioc->spi_data.nvram[id];
-
- if (dv->now.width)
- data &= ~MPT_NVRAM_WIDE_DISABLE;
- else
- data |= MPT_NVRAM_WIDE_DISABLE;
-
- if (!dv->now.offset)
- factor = MPT_ASYNC;
-
- data &= ~MPT_NVRAM_SYNC_MASK;
- data |= (dv->now.factor << MPT_NVRAM_SYNC_SHIFT) & MPT_NVRAM_SYNC_MASK;
-
- hd->ioc->spi_data.nvram[id] = data;
- }
- }
- break;
- }
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* mptscsih_fillbuf - fill a buffer with a special data pattern
- * cleanup. For bus scan only.
- *
- * @buffer: Pointer to data buffer to be filled.
- * @size: Number of bytes to fill
- * @index: Pattern index
- * @width: bus width, 0 (8 bits) or 1 (16 bits)
- */
-static void
-mptscsih_fillbuf(char *buffer, int size, int index, int width)
-{
- char *ptr = buffer;
- int ii;
- char byte;
- short val;
-
- switch (index) {
- case 0:
-
- if (width) {
- /* Pattern: 0000 FFFF 0000 FFFF
- */
- for (ii=0; ii < size; ii++, ptr++) {
- if (ii & 0x02)
- *ptr = 0xFF;
- else
- *ptr = 0x00;
- }
- } else {
- /* Pattern: 00 FF 00 FF
- */
- for (ii=0; ii < size; ii++, ptr++) {
- if (ii & 0x01)
- *ptr = 0xFF;
- else
- *ptr = 0x00;
- }
- }
- break;
-
- case 1:
- if (width) {
- /* Pattern: 5555 AAAA 5555 AAAA 5555
- */
- for (ii=0; ii < size; ii++, ptr++) {
- if (ii & 0x02)
- *ptr = 0xAA;
- else
- *ptr = 0x55;
- }
- } else {
- /* Pattern: 55 AA 55 AA 55
- */
- for (ii=0; ii < size; ii++, ptr++) {
- if (ii & 0x01)
- *ptr = 0xAA;
- else
- *ptr = 0x55;
- }
- }
- break;
-
- case 2:
- /* Pattern: 00 01 02 03 04 05
- * ... FE FF 00 01..
- */
- for (ii=0; ii < size; ii++, ptr++)
- *ptr = (char) ii;
- break;
-
- case 3:
- if (width) {
- /* Wide Pattern: FFFE 0001 FFFD 0002
- * ... 4000 DFFF 8000 EFFF
- */
- byte = 0;
- for (ii=0; ii < size/2; ii++) {
- /* Create the base pattern
- */
- val = (1 << byte);
- /* every 64 (0x40) bytes flip the pattern
- * since we fill 2 bytes / iteration,
- * test for ii = 0x20
- */
- if (ii & 0x20)
- val = ~(val);
-
- if (ii & 0x01) {
- *ptr = (char)( (val & 0xFF00) >> 8);
- ptr++;
- *ptr = (char)(val & 0xFF);
- byte++;
- byte &= 0x0F;
- } else {
- val = ~val;
- *ptr = (char)( (val & 0xFF00) >> 8);
- ptr++;
- *ptr = (char)(val & 0xFF);
- }
-
- ptr++;
- }
- } else {
- /* Narrow Pattern: FE 01 FD 02 FB 04
- * .. 7F 80 01 FE 02 FD ... 80 7F
- */
- byte = 0;
- for (ii=0; ii < size; ii++, ptr++) {
- /* Base pattern - first 32 bytes
- */
- if (ii & 0x01) {
- *ptr = (1 << byte);
- byte++;
- byte &= 0x07;
- } else {
- *ptr = (char) (~(1 << byte));
- }
-
- /* Flip the pattern every 32 bytes
- */
- if (ii & 0x20)
- *ptr = ~(*ptr);
- }
- }
- break;
- }
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/* If DV disabled (negoNvram set to USE_NVARM) or if not LUN 0, return.
- * Else set the NEED_DV flag after Read Capacity Issued (disks)
- * or Mode Sense (cdroms).
- *
- * Tapes, initTarget will set this flag on completion of Inquiry command.
- * Called only if DV_NOT_DONE flag is set
- */
-static void
-mptscsih_set_dvflags(MPT_SCSI_HOST *hd, struct scsi_cmnd *sc)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- u8 cmd;
- SpiCfgData *pSpi;
-
- ddvtprintk((MYIOC_s_NOTE_FMT
- " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
- hd->ioc->name, sc->device->id, sc->device->lun , hd->negoNvram, sc->cmnd[0]));
-
- if ((sc->device->lun != 0) || (hd->negoNvram != 0))
- return;
-
- cmd = sc->cmnd[0];
-
- if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
- pSpi = &ioc->spi_data;
- if ((ioc->raid_data.isRaid & (1 << sc->device->id)) && ioc->raid_data.pIocPg3) {
- /* Set NEED_DV for all hidden disks
- */
- Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
-
- while (numPDisk) {
- pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
- pPDisk++;
- numPDisk--;
- }
- }
- pSpi->dvStatus[sc->device->id] |= MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for visible disk id %d\n", sc->device->id));
- }
-}
-
-/* mptscsih_raid_set_dv_flags()
- *
- * New or replaced disk. Set DV flag and schedule DV.
- */
-static void
-mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
-{
- MPT_ADAPTER *ioc = hd->ioc;
- SpiCfgData *pSpi = &ioc->spi_data;
- Ioc3PhysDisk_t *pPDisk;
- int numPDisk;
-
- if (hd->negoNvram != 0)
- return;
-
- ddvtprintk(("DV requested for phys disk id %d\n", id));
- if (ioc->raid_data.pIocPg3) {
- pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
- numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
- while (numPDisk) {
- if (id == pPDisk->PhysDiskNum) {
- pSpi->dvStatus[pPDisk->PhysDiskID] =
- (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
- pSpi->forceDv = MPT_SCSICFG_NEED_DV;
- ddvtprintk(("NEED_DV set for phys disk id %d\n",
- pPDisk->PhysDiskID));
- break;
- }
- pPDisk++;
- numPDisk--;
- }
-
- if (numPDisk == 0) {
- /* The physical disk that needs DV was not found
- * in the stored IOC Page 3. The driver must reload
- * this page. DV routine will set the NEED_DV flag for
- * all phys disks that have DV_NOT_DONE set.
- */
- pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
- ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
- }
- }
-}
-#endif /* ~MPTSCSIH_ENABLE_DOMAIN_VALIDATION */
+EXPORT_SYMBOL(mptscsih_host_attrs);
EXPORT_SYMBOL(mptscsih_remove);
EXPORT_SYMBOL(mptscsih_shutdown);
EXPORT_SYMBOL(mptscsih_proc_info);
EXPORT_SYMBOL(mptscsih_info);
EXPORT_SYMBOL(mptscsih_qcmd);
-EXPORT_SYMBOL(mptscsih_target_alloc);
-EXPORT_SYMBOL(mptscsih_slave_alloc);
-EXPORT_SYMBOL(mptscsih_target_destroy);
EXPORT_SYMBOL(mptscsih_slave_destroy);
EXPORT_SYMBOL(mptscsih_slave_configure);
EXPORT_SYMBOL(mptscsih_abort);
EXPORT_SYMBOL(mptscsih_event_process);
EXPORT_SYMBOL(mptscsih_ioc_reset);
EXPORT_SYMBOL(mptscsih_change_queue_depth);
-EXPORT_SYMBOL(mptscsih_timer_expired);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/