select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_ARCH_KGDB
+ select ARCH_HAVE_CUSTOM_GPIO_H
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select RTC_LIB if !MACH_LOONGSON
select GENERIC_ATOMIC64 if !64BIT
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select HAVE_ARCH_JUMP_LABEL
+ select ARCH_WANT_IPC_PARSE_VERSION
select IRQ_FORCED_THREADING
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select ARCH_DISCARD_MEMBLOCK
+ select GENERIC_SMP_IDLE_THREAD
+ select BUILDTIME_EXTABLE_SORT
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_CMOS_UPDATE
menu "Machine selection"
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT_UART16550
select ARCH_REQUIRE_GPIOLIB
- select GCD
select VLYNQ
help
Support for the Texas Instruments AR7 System-on-a-Chip
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
- select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select SSB
- select SSB_DRIVER_MIPS
- select SSB_DRIVER_EXTIF
- select SSB_EMBEDDED
- select SSB_B43_PCI_BRIDGE if PCI
- select SSB_PCICORE_HOSTMODE if PCI
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
select CFE
select SYS_HAS_EARLY_PRINTK
select HAVE_PWM
select HAVE_CLK
+ select GENERIC_IRQ_CHIP
config LANTIQ
bool "Lantiq based platforms"
select ARCH_REQUIRE_GPIOLIB
select SWAP_IO_SPACE
select BOOT_RAW
- select HAVE_CLK
- select MIPS_MACHINE
+ select HAVE_MACH_CLKDEV
+ select CLKDEV_LOOKUP
+ select USE_OF
config LASAT
bool "LASAT Networks platforms"
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_NEVADA
select SYS_HAS_CPU_RM7000
select SYS_HAS_EARLY_PRINTK
select DMA_COHERENT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_HAS_CPU_CAVIUM_OCTEON
select HOLES_IN_ZONE
select DMA_COHERENT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_HOTPLUG_CPU
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_CAVIUM_OCTEON
depends on EXPERIMENTAL
select BOOT_ELF32
select NLM_COMMON
- select NLM_XLR
select SYS_HAS_CPU_XLR
select SYS_SUPPORTS_SMP
select HW_HAS_PCI
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
+ select ARCH_SUPPORTS_MSI
select ZONE_DMA if 64BIT
select SYNC_R4K
select SYS_HAS_EARLY_PRINTK
Support for systems based on Netlogic XLR and XLS processors.
Say Y here if you have a XLR or XLS based board.
+config NLM_XLP_BOARD
+ bool "Netlogic XLP based systems"
+ depends on EXPERIMENTAL
+ select BOOT_ELF32
+ select NLM_COMMON
+ select SYS_HAS_CPU_XLP
+ select SYS_SUPPORTS_SMP
+ select HW_HAS_PCI
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select 64BIT_PHYS_ADDR
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select DMA_COHERENT
+ select NR_CPUS_DEFAULT_32
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select ZONE_DMA if 64BIT
+ select SYNC_R4K
+ select SYS_HAS_EARLY_PRINTK
+ help
+ This board is based on Netlogic XLP Processor.
+ Say Y here if you have a XLP based board.
+
endchoice
source "arch/mips/alchemy/Kconfig"
source "arch/mips/ath79/Kconfig"
+source "arch/mips/bcm47xx/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
bool
default n
-config ARCH_SUPPORTS_OPROFILE
- bool
- default y if !MIPS_MT_SMTC
-
config GENERIC_HWEIGHT
bool
default y
bool
default y
-config GENERIC_CLOCKEVENTS
- bool
- default y
-
-config GENERIC_CMOS_UPDATE
- bool
- default y
-
config SCHED_OMIT_FRAME_POINTER
bool
default y
bool
#
-# Endianess selection. Sufficiently obscure so many users don't know what to
+# Endianness selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
choice
- prompt "Endianess selection"
+ prompt "Endianness selection"
help
Some MIPS machines can be configured for either little or big endian
byte order. These modes require different kernels and a different
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
+ select ARCH_SPARSEMEM_ENABLE
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_SMP
config CPU_BMIPS3300
bool "BMIPS3300"
depends on SYS_HAS_CPU_BMIPS3300
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_32BIT_KERNEL
- select WEAK_ORDERING
+ select CPU_BMIPS
help
Broadcom BMIPS3300 processors.
config CPU_BMIPS4350
bool "BMIPS4350"
depends on SYS_HAS_CPU_BMIPS4350
- select CPU_SUPPORTS_32BIT_KERNEL
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
+ select CPU_BMIPS
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
- select WEAK_ORDERING
help
Broadcom BMIPS4350 ("VIPER") processors.
config CPU_BMIPS4380
bool "BMIPS4380"
depends on SYS_HAS_CPU_BMIPS4380
- select CPU_SUPPORTS_32BIT_KERNEL
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
+ select CPU_BMIPS
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
- select WEAK_ORDERING
help
Broadcom BMIPS4380 processors.
config CPU_BMIPS5000
bool "BMIPS5000"
depends on SYS_HAS_CPU_BMIPS5000
- select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_BMIPS
select CPU_SUPPORTS_HIGHMEM
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
+ select MIPS_CPU_SCACHE
select SYS_SUPPORTS_SMP
select SYS_SUPPORTS_HOTPLUG_CPU
- select WEAK_ORDERING
help
Broadcom BMIPS5000 processors.
select CPU_SUPPORTS_HUGEPAGES
help
Netlogic Microsystems XLR/XLS processors.
+
+config CPU_XLP
+ bool "Netlogic XLP SoC"
+ depends on SYS_HAS_CPU_XLP
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select CPU_HAS_LLSC
+ select WEAK_ORDERING
+ select WEAK_REORDERING_BEYOND_LLSC
+ select CPU_HAS_PREFETCH
+ help
+ Netlogic Microsystems XLP processors.
endchoice
if CPU_LOONGSON2F
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
+config CPU_BMIPS
+ bool
+ select CPU_MIPS32
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select WEAK_ORDERING
+
config SYS_HAS_CPU_LOONGSON2E
bool
config SYS_HAS_CPU_XLR
bool
+config SYS_HAS_CPU_XLP
+ bool
+
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
- range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
- default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
- range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
- default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+ range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB
+ default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB
+ range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB
+ default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB
+ range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB
+ default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB
range 11 64
default "11"
help
config CPU_HAS_WB
bool
+config XKS01
+ bool
+
#
# Vectored interrupt mode is an R2 feature
#
depends on !CPU_R3000
default y
-config GENERIC_CLOCKEVENTS_BROADCAST
- bool
-
#
# CPU non-features
#
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
-config ARCH_POPULATES_NODE_MAP
- def_bool y
-
config ARCH_SPARSEMEM_ENABLE
bool
select SPARSEMEM_STATIC
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32
+ depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON)
default y
help
Enable hardware performance counter support for perf events. If
performance should round up your number of processors to the next
power of two.
-source "kernel/time/Kconfig"
-
#
# Timer Interrupt Frequency Configuration
#
source "kernel/Kconfig.preempt"
-config MIPS_INSANE_LARGE
- bool "Support for large 64-bit configurations"
- depends on CPU_R10000 && 64BIT
- help
- MIPS R10000 does support a 44 bit / 16TB address space as opposed to
- previous 64-bit processors which only supported 40 bit / 1TB. If you
- need processes of more than 1TB virtual address space, say Y here.
- This will result in additional memory usage, so it is not
- recommended for normal users.
-
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on EXPERIMENTAL
bool "Flattened Device Tree support"
select OF
select OF_EARLY_FLATTREE
+ select IRQ_DOMAIN
help
Include support for flattened device tree machine descriptions.
bool "Support for PCI controller"
depends on HW_HAS_PCI
select PCI_DOMAINS
+ select GENERIC_PCI_IOMAP
+ select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
Linux driver support status is documented at:
<http://www.linux-mips.org/wiki/DECstation>
-#config ACCESSBUS
-# bool "Access.Bus support"
-# depends on TC
-
config MMU
bool
default y
config COMPAT
bool
depends on MIPS32_COMPAT
+ select ARCH_WANT_OLD_COMPAT_IPC
default y
config SYSVIPC_COMPAT
Code Review / linux-3.10.git / blobdiff