* published by the Free Software Foundation.
*
* ChangeLog:
- * 03-06-2004 John Lenz <jelenz@wisc.edu>
+ * 2006 Pavel Machek <pavel@suse.cz>
+ * 03-06-2004 John Lenz <lenz@cs.wisc.edu>
* 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
* 04-16-2001 Lineo Japan,Inc. ...
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
+#include <linux/gpio.h>
+#include <linux/pda_power.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
+#include <mach/mcp.h>
#include "generic.h"
static struct scoop_config collie_scoop_setup = {
.io_dir = COLLIE_SCOOP_IO_DIR,
.io_out = COLLIE_SCOOP_IO_OUT,
+ .gpio_base = COLLIE_SCOOP_GPIO_BASE,
};
struct platform_device colliescoop_device = {
.resource = collie_scoop_resources,
};
+static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
+ {
+ .dev = &colliescoop_device.dev,
+ .irq = COLLIE_IRQ_GPIO_CF_IRQ,
+ .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+ },
+};
+
+static struct scoop_pcmcia_config collie_pcmcia_config = {
+ .devs = &collie_pcmcia_scoop[0],
+ .num_devs = 1,
+};
+
+static struct mcp_plat_data collie_mcp_data = {
+ .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
+ .sclk_rate = 9216000,
+ .gpio_base = COLLIE_TC35143_GPIO_BASE,
+};
+
+/*
+ * Collie AC IN
+ */
+static int collie_power_init(struct device *dev)
+{
+ int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
+ if (ret)
+ goto err_gpio_req;
+
+ ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
+ if (ret)
+ goto err_gpio_in;
+
+ return 0;
+
+err_gpio_in:
+ gpio_free(COLLIE_GPIO_AC_IN);
+err_gpio_req:
+ return ret;
+}
+
+static void collie_power_exit(struct device *dev)
+{
+ gpio_free(COLLIE_GPIO_AC_IN);
+}
+
+static int collie_power_ac_online(void)
+{
+ return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
+}
+
+static char *collie_ac_supplied_to[] = {
+ "main-battery",
+ "backup-battery",
+};
+
+static struct pda_power_pdata collie_power_data = {
+ .init = collie_power_init,
+ .is_ac_online = collie_power_ac_online,
+ .exit = collie_power_exit,
+ .supplied_to = collie_ac_supplied_to,
+ .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to),
+};
+
+static struct resource collie_power_resource[] = {
+ {
+ .name = "ac",
+ .start = gpio_to_irq(COLLIE_GPIO_AC_IN),
+ .end = gpio_to_irq(COLLIE_GPIO_AC_IN),
+ .flags = IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device collie_power_device = {
+ .name = "pda-power",
+ .id = -1,
+ .dev.platform_data = &collie_power_data,
+ .resource = collie_power_resource,
+ .num_resources = ARRAY_SIZE(collie_power_resource),
+};
+
+#ifdef CONFIG_SHARP_LOCOMO
+/*
+ * low-level UART features.
+ */
+struct platform_device collie_locomo_device;
+
+static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ if (mctrl & TIOCM_RTS)
+ locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
+ else
+ locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
+
+ if (mctrl & TIOCM_DTR)
+ locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
+ else
+ locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
+}
+
+static u_int collie_uart_get_mctrl(struct uart_port *port)
+{
+ int ret = TIOCM_CD;
+ unsigned int r;
+
+ r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
+ if (r == -ENODEV)
+ return ret;
+ if (r & LOCOMO_GPIO_CTS)
+ ret |= TIOCM_CTS;
+ if (r & LOCOMO_GPIO_DSR)
+ ret |= TIOCM_DSR;
+
+ return ret;
+}
+
+static struct sa1100_port_fns collie_port_fns __initdata = {
+ .set_mctrl = collie_uart_set_mctrl,
+ .get_mctrl = collie_uart_get_mctrl,
+};
+
+static int collie_uart_probe(struct locomo_dev *dev)
+{
+ return 0;
+}
+
+static int collie_uart_remove(struct locomo_dev *dev)
+{
+ return 0;
+}
+
+static struct locomo_driver collie_uart_driver = {
+ .drv = {
+ .name = "collie_uart",
+ },
+ .devid = LOCOMO_DEVID_UART,
+ .probe = collie_uart_probe,
+ .remove = collie_uart_remove,
+};
+
+static int __init collie_uart_init(void)
+{
+ return locomo_driver_register(&collie_uart_driver);
+}
+device_initcall(collie_uart_init);
+
+#endif
+
static struct resource locomo_resources[] = {
[0] = {
},
};
-static struct platform_device locomo_device = {
+struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,
.num_resources = ARRAY_SIZE(locomo_resources),
};
static struct platform_device *devices[] __initdata = {
- &locomo_device,
+ &collie_locomo_device,
&colliescoop_device,
+ &collie_power_device,
};
static struct mtd_partition collie_partitions[] = {
}
};
+static int collie_flash_init(void)
+{
+ int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
+ if (rc)
+ return rc;
+
+ rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
+ if (rc)
+ gpio_free(COLLIE_GPIO_VPEN);
+
+ return rc;
+}
+
static void collie_set_vpp(int vpp)
{
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
- if (vpp)
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
- else
- write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+ gpio_set_value(COLLIE_GPIO_VPEN, vpp);
+}
+
+static void collie_flash_exit(void)
+{
+ gpio_free(COLLIE_GPIO_VPEN);
}
static struct flash_platform_data collie_flash_data = {
.map_name = "cfi_probe",
+ .init = collie_flash_init,
.set_vpp = collie_set_vpp,
+ .exit = collie_flash_exit,
.parts = collie_partitions,
.nr_parts = ARRAY_SIZE(collie_partitions),
};
int ret = 0;
/* cpu initialize */
- GAFR = ( GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
- GPIO_32_768kHz );
+ GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+ GPIO_MCP_CLK | GPIO_32_768kHz;
+
+ GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+ GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+ GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+ _COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
+ _COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+
+ PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+ PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+ PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
- GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
- GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
- GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
- GPLR = GPIO_GPIO18;
+ PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
+ _COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
- // PPC pin setting
- PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
- PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
- PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
+ PGSR = _COLLIE_GPIO_nREMOCON_ON;
- PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
+ PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
- GAFR |= GPIO_32_768kHz;
- GPDR |= GPIO_32_768kHz;
- TUCR = TUCR_32_768kHz;
+ PCFR = PCFR_OPDE;
+
+ GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
+
+
+ platform_scoop_config = &collie_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
}
- sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
- ARRAY_SIZE(collie_flash_resources));
+ sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
+ ARRAY_SIZE(collie_flash_resources));
+ sa11x0_register_mcp(&collie_mcp_data);
sharpsl_save_param();
}
{
sa1100_map_io();
iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
+
+#ifdef CONFIG_SHARP_LOCOMO
+ sa1100_register_uart_fns(&collie_port_fns);
+#endif
+ sa1100_register_uart(0, 3);
+ sa1100_register_uart(1, 1);
}
MACHINE_START(COLLIE, "Sharp-Collie")
Code Review / linux-3.10.git / blobdiff