#include <asm/mach/map.h>
-#include <plat/mux.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
-#include <plat/gpmc.h>
#include <plat/serial.h>
-#include <plat/mux.h>
-#include <plat/vram.h>
-#include "clock.h"
+#include "clock2xxx.h"
+#include "clock3xxx.h"
+#include "clock44xx.h"
+#include "io.h"
#include <plat/omap-pm.h>
-#include <plat/powerdomain.h>
-#include "powerdomains.h"
+#include "powerdomain.h"
-#include <plat/clockdomain.h>
-#include "clockdomains.h"
+#include "clockdomain.h"
#include <plat/omap_hwmod.h>
-#include "omap_hwmod_2420.h"
-#include "omap_hwmod_2430.h"
-#include "omap_hwmod_34xx.h"
+#include <plat/multi.h>
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
},
};
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
- .virtual = DSP_MEM_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
- .length = DSP_MEM_24XX_SIZE,
+ .virtual = DSP_MEM_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
+ .length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_IPI_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
- .length = DSP_IPI_24XX_SIZE,
+ .virtual = DSP_IPI_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
+ .length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_MMU_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
- .length = DSP_MMU_24XX_SIZE,
+ .virtual = DSP_MMU_2420_VIRT,
+ .pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
+ .length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};
#endif
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
static struct map_desc omap243x_io_desc[] __initdata = {
{
.virtual = L4_WK_243X_VIRT,
#endif
#endif
-#ifdef CONFIG_ARCH_OMAP34XX
+#ifdef CONFIG_ARCH_OMAP3
static struct map_desc omap34xx_io_desc[] __initdata = {
{
.virtual = L3_34XX_VIRT,
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
- {
- .virtual = L4_WK_34XX_VIRT,
- .pfn = __phys_to_pfn(L4_WK_34XX_PHYS),
- .length = L4_WK_34XX_SIZE,
- .type = MT_DEVICE
- },
{
.virtual = OMAP34XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
+#if defined(CONFIG_DEBUG_LL) && \
+ (defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
+ {
+ .virtual = ZOOM_UART_VIRT,
+ .pfn = __phys_to_pfn(ZOOM_UART_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_SOC_OMAPTI816X
+static struct map_desc omapti816x_io_desc[] __initdata = {
+ {
+ .virtual = L4_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_34XX_PHYS),
+ .length = L4_34XX_SIZE,
+ .type = MT_DEVICE
+ },
};
#endif
+
#ifdef CONFIG_ARCH_OMAP4
static struct map_desc omap44xx_io_desc[] __initdata = {
{
.length = L4_44XX_SIZE,
.type = MT_DEVICE,
},
- {
- .virtual = L4_WK_44XX_VIRT,
- .pfn = __phys_to_pfn(L4_WK_44XX_PHYS),
- .length = L4_WK_44XX_SIZE,
- .type = MT_DEVICE,
- },
{
.virtual = OMAP44XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
};
#endif
-void __init omap2_map_common_io(void)
+static void __init _omap2_map_common_io(void)
+{
+ /* Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ omap2_check_revision();
+ omap_sram_init();
+}
+
+#ifdef CONFIG_SOC_OMAP2420
+void __init omap242x_map_common_io(void)
{
-#if defined(CONFIG_ARCH_OMAP2420)
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+ _omap2_map_common_io();
+}
#endif
-#if defined(CONFIG_ARCH_OMAP2430)
+#ifdef CONFIG_SOC_OMAP2430
+void __init omap243x_map_common_io(void)
+{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+ _omap2_map_common_io();
+}
#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
+#ifdef CONFIG_ARCH_OMAP3
+void __init omap34xx_map_common_io(void)
+{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+ _omap2_map_common_io();
+}
#endif
-#if defined(CONFIG_ARCH_OMAP4)
- iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#ifdef CONFIG_SOC_OMAPTI816X
+void __init omapti816x_map_common_io(void)
+{
+ iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
+ _omap2_map_common_io();
+}
#endif
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
- omap2_check_revision();
- omap_sram_init();
- omapfb_reserve_sdram();
- omap_vram_reserve_sdram();
+#ifdef CONFIG_ARCH_OMAP4
+void __init omap44xx_map_common_io(void)
+{
+ iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+ _omap2_map_common_io();
}
+#endif
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
- if (!dpll3_m2_ck)
+ if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
return v;
}
-void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1)
+static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
+{
+ return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
+}
+
+void __iomem *omap_irq_base;
+
+/*
+ * Initialize asm_irq_base for entry-macro.S
+ */
+static inline void omap_irq_base_init(void)
+{
+ if (cpu_is_omap24xx())
+ omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
+ else if (cpu_is_omap34xx())
+ omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
+ else if (cpu_is_omap44xx())
+ omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
+ else
+ pr_err("Could not initialize omap_irq_base\n");
+}
+
+void __init omap2_init_common_infrastructure(void)
{
- struct omap_hwmod **hwmods = NULL;
+ u8 postsetup_state;
+
+ if (cpu_is_omap242x()) {
+ omap2xxx_powerdomains_init();
+ omap2_clockdomains_init();
+ omap2420_hwmod_init();
+ } else if (cpu_is_omap243x()) {
+ omap2xxx_powerdomains_init();
+ omap2_clockdomains_init();
+ omap2430_hwmod_init();
+ } else if (cpu_is_omap34xx()) {
+ omap3xxx_powerdomains_init();
+ omap2_clockdomains_init();
+ omap3xxx_hwmod_init();
+ } else if (cpu_is_omap44xx()) {
+ omap44xx_powerdomains_init();
+ omap44xx_clockdomains_init();
+ omap44xx_hwmod_init();
+ } else {
+ pr_err("Could not init hwmod data - unknown SoC\n");
+ }
+
+ /* Set the default postsetup state for all hwmods */
+#ifdef CONFIG_PM_RUNTIME
+ postsetup_state = _HWMOD_STATE_IDLE;
+#else
+ postsetup_state = _HWMOD_STATE_ENABLED;
+#endif
+ omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
+
+ /*
+ * Set the default postsetup state for unusual modules (like
+ * MPU WDT).
+ *
+ * The postsetup_state is not actually used until
+ * omap_hwmod_late_init(), so boards that desire full watchdog
+ * coverage of kernel initialization can reprogram the
+ * postsetup_state between the calls to
+ * omap2_init_common_infra() and omap2_init_common_devices().
+ *
+ * XXX ideally we could detect whether the MPU WDT was currently
+ * enabled here and make this conditional
+ */
+ postsetup_state = _HWMOD_STATE_DISABLED;
+ omap_hwmod_for_each_by_class("wd_timer",
+ _set_hwmod_postsetup_state,
+ &postsetup_state);
+
+ omap_pm_if_early_init();
if (cpu_is_omap2420())
- hwmods = omap2420_hwmods;
+ omap2420_clk_init();
else if (cpu_is_omap2430())
- hwmods = omap2430_hwmods;
+ omap2430_clk_init();
else if (cpu_is_omap34xx())
- hwmods = omap34xx_hwmods;
-
-#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
- /* The OPP tables have to be registered before a clk init */
- omap_hwmod_init(hwmods);
- omap2_mux_init();
- omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
- pwrdm_init(powerdomains_omap);
- clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
-#endif
- omap2_clk_init();
- omap_serial_early_init();
-#ifndef CONFIG_ARCH_OMAP4
- omap_hwmod_late_init();
- omap_pm_if_init();
- omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
- _omap2_init_reprogram_sdrc();
-#endif
- gpmc_init();
+ omap3xxx_clk_init();
+ else if (cpu_is_omap44xx())
+ omap4xxx_clk_init();
+ else
+ pr_err("Could not init clock framework - unknown SoC\n");
+}
+
+void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1)
+{
+ if (cpu_is_omap24xx() || omap3_has_sdrc()) {
+ omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
+ _omap2_init_reprogram_sdrc();
+ }
+
+ omap_irq_base_init();
+}
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+ return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+ return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+ return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+ __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+ __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+ __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
}
+EXPORT_SYMBOL(omap_writel);