Merge branch 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux-3.10.git] / arch / arm / mach-exynos / mach-nuri.c
index 435261f..32bb7b3 100644 (file)
@@ -28,6 +28,7 @@
 
 #include <video/platform_lcd.h>
 #include <media/m5mols.h>
+#include <media/s5k6aa.h>
 #include <media/s5p_fimc.h>
 #include <media/v4l2-mediabus.h>
 
@@ -75,6 +76,7 @@ enum fixed_regulator_id {
        FIXED_REG_ID_MAX8903,
        FIXED_REG_ID_CAM_A28V,
        FIXED_REG_ID_CAM_12V,
+       FIXED_REG_ID_CAM_VT_15V,
 };
 
 static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
@@ -399,6 +401,9 @@ static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
 static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
        REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
 };
+static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
+       REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
+};
 static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
        REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
 };
@@ -431,7 +436,7 @@ static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
        REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
 };
 static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
-       REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
+       REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
 };
 static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
        REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
@@ -546,6 +551,8 @@ static struct regulator_init_data __initdata max8997_ldo6_data = {
                        .enabled        = 1,
                },
        },
+       .num_consumer_supplies  = ARRAY_SIZE(nuri_max8997_ldo6_consumer),
+       .consumer_supplies      = nuri_max8997_ldo6_consumer,
 };
 
 static struct regulator_init_data __initdata max8997_ldo7_data = {
@@ -742,7 +749,7 @@ static struct regulator_init_data __initdata max8997_buck2_data = {
        .constraints    = {
                .name           = "VINT_1.1V_C210",
                .min_uV         = 900000,
-               .max_uV         = 1100000,
+               .max_uV         = 1200000,
                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
                .always_on      = 1,
                .state_mem      = {
@@ -957,7 +964,6 @@ static struct max8997_platform_data __initdata nuri_max8997_pdata = {
        .regulators             = nuri_max8997_regulators,
 
        .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
-       .buck2_gpiodvs = true,
 
        .buck1_voltage[0] = 1350000, /* 1.35V */
        .buck1_voltage[1] = 1300000, /* 1.3V */
@@ -1116,7 +1122,30 @@ static void __init nuri_ehci_init(void)
 }
 
 /* CAMERA */
+static struct regulator_consumer_supply cam_vt_cam15_supply =
+       REGULATOR_SUPPLY("vdd_core", "6-003c");
+
+static struct regulator_init_data cam_vt_cam15_reg_init_data = {
+       .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
+       .num_consumer_supplies = 1,
+       .consumer_supplies = &cam_vt_cam15_supply,
+};
+
+static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
+       .supply_name    = "VT_CAM_1.5V",
+       .microvolts     = 1500000,
+       .gpio           = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
+       .enable_high    = 1,
+       .init_data      = &cam_vt_cam15_reg_init_data,
+};
+
+static struct platform_device cam_vt_cam15_fixed_rdev = {
+       .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
+       .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg },
+};
+
 static struct regulator_consumer_supply cam_vdda_supply[] = {
+       REGULATOR_SUPPLY("vdda", "6-003c"),
        REGULATOR_SUPPLY("a_sensor", "0-001f"),
 };
 
@@ -1173,6 +1202,21 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = {
 
 #define GPIO_CAM_MEGA_RST      EXYNOS4_GPY3(7) /* ISP_RESET */
 #define GPIO_CAM_8M_ISP_INT    EXYNOS4_GPL2(5)
+#define GPIO_CAM_VT_NSTBY      EXYNOS4_GPL2(0)
+#define GPIO_CAM_VT_NRST       EXYNOS4_GPL2(1)
+
+static struct s5k6aa_platform_data s5k6aa_pldata = {
+       .mclk_frequency = 24000000UL,
+       .gpio_reset     = { GPIO_CAM_VT_NRST, 0 },
+       .gpio_stby      = { GPIO_CAM_VT_NSTBY, 0 },
+       .bus_type       = V4L2_MBUS_PARALLEL,
+       .horiz_flip     = 1,
+};
+
+static struct i2c_board_info s5k6aa_board_info = {
+       I2C_BOARD_INFO("S5K6AA", 0x3c),
+       .platform_data = &s5k6aa_pldata,
+};
 
 static struct m5mols_platform_data m5mols_platdata = {
        .gpio_reset = GPIO_CAM_MEGA_RST,
@@ -1185,6 +1229,13 @@ static struct i2c_board_info m5mols_board_info = {
 
 static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
        {
+               .flags          = V4L2_MBUS_PCLK_SAMPLE_RISING |
+                                 V4L2_MBUS_VSYNC_ACTIVE_LOW,
+               .bus_type       = FIMC_ITU_601,
+               .board_info     = &s5k6aa_board_info,
+               .clk_frequency  = 24000000UL,
+               .i2c_bus_num    = 6,
+       }, {
                .flags          = V4L2_MBUS_PCLK_SAMPLE_FALLING |
                                  V4L2_MBUS_VSYNC_ACTIVE_LOW,
                .bus_type       = FIMC_MIPI_CSI2,
@@ -1200,11 +1251,13 @@ static struct s5p_platform_fimc fimc_md_platdata = {
 };
 
 static struct gpio nuri_camera_gpios[] = {
+       { GPIO_CAM_VT_NSTBY,    GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
+       { GPIO_CAM_VT_NRST,     GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST"  },
        { GPIO_CAM_8M_ISP_INT,  GPIOF_IN,           "8M_ISP_INT"  },
        { GPIO_CAM_MEGA_RST,    GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
 };
 
-static void nuri_camera_init(void)
+static void __init nuri_camera_init(void)
 {
        s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
                         &s5p_device_mipi_csis0);
@@ -1224,6 +1277,8 @@ static void nuri_camera_init(void)
                pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
 
        /* Free GPIOs controlled directly by the sensor drivers. */
+       gpio_free(GPIO_CAM_VT_NRST);
+       gpio_free(GPIO_CAM_VT_NSTBY);
        gpio_free(GPIO_CAM_MEGA_RST);
 
        if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
@@ -1234,15 +1289,27 @@ static void nuri_camera_init(void)
        s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
 }
 
+static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
+       .frequency      = 400000U,
+       .sda_delay      = 200,
+       .bus_num        = 6,
+};
+
 static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
        .frequency      = 400000U,
        .sda_delay      = 200,
 };
 
+/* DEVFREQ controlling memory/bus */
+static struct platform_device exynos4_bus_devfreq = {
+       .name                   = "exynos4210-busfreq",
+};
+
 static struct platform_device *nuri_devices[] __initdata = {
        /* Samsung Platform Devices */
        &s3c_device_i2c5, /* PMIC should initialize first */
        &s3c_device_i2c0,
+       &s3c_device_i2c6,
        &emmc_fixed_voltage,
        &s5p_device_mipi_csis0,
        &s5p_device_fimc0,
@@ -1259,6 +1326,8 @@ static struct platform_device *nuri_devices[] __initdata = {
        &s3c_device_i2c3,
        &i2c9_gpio,
        &s3c_device_adc,
+       &s5p_device_g2d,
+       &s5p_device_jpeg,
        &s3c_device_rtc,
        &s5p_device_mfc,
        &s5p_device_mfc_l,
@@ -1274,8 +1343,10 @@ static struct platform_device *nuri_devices[] __initdata = {
        &nuri_backlight_device,
        &max8903_fixed_reg_dev,
        &nuri_max8903_device,
+       &cam_vt_cam15_fixed_rdev,
        &cam_vdda_fixed_rdev,
        &cam_8m_12v_fixed_rdev,
+       &exynos4_bus_devfreq,
 };
 
 static void __init nuri_map_io(void)
@@ -1305,6 +1376,7 @@ static void __init nuri_machine_init(void)
        i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
        i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
        i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
+       s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
 
        s5p_fimd0_set_platdata(&nuri_fb_pdata);