select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HARDIRQS_SW_RESEND
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
- select GENERIC_IRQ_PROBE
+ select ARCH_WANT_IPC_PARSE_VERSION
select HARDIRQS_SW_RESEND
select CPU_PM if (SUSPEND || CPU_IDLE)
select GENERIC_PCI_IOMAP
select GENERIC_SMP_IDLE_THREAD
select KTIME_SCALAR
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
+ select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
bool
default y
-config GENERIC_LOCKBREAK
- bool
- default y
- depends on SMP && PREEMPT
-
config RWSEM_GENERIC_SPINLOCK
bool
default y
prompt "ARM system type"
default ARCH_VERSATILE
+config ARCH_SOCFPGA
+ bool "Altera SOCFPGA family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select CACHE_L2X0
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
+ select CPU_V7
+ select DW_APB_TIMER
+ select DW_APB_TIMER_OF
+ select GENERIC_CLOCKEVENTS
+ select GPIO_PL061 if GPIOLIB
+ select HAVE_ARM_SCU
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ This enables support for Altera SOCFPGA Cyclone V platform
+
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ARCH_HAS_CPUFREQ
- select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
+ select CLK_VERSATILE
select HAVE_TCM
select ICST
select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
+ select PLAT_VERSATILE_CLOCK
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
select ARM_TIMER_SP804
select ARM_AMBA
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_PATA_PLATFORM
select NO_IOPORT
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
This enables support for the ARM Ltd Versatile Express boards.
select ARM_TIMER_SP804
select CACHE_L2X0
select CLKDEV_LOOKUP
+ select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
select CPU_V7
select NO_IOPORT
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select USE_OF
help
Support for Freescale MXC/iMX-based family of processors
help
Support for Intel's IXP4XX (XScale) family of processors.
+config ARCH_MVEBU
+ bool "Marvell SOCs with Device Tree support"
+ select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select CLKSRC_MMIO
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select COMMON_CLK
+ help
+ Support for the Marvell SoC Family with device tree support
+
config ARCH_DOVE
bool "Marvell Dove"
select CPU_V7
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select USE_OF
+ select HAVE_PWM
help
Support for the NXP LPC32XX family of processors
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
select MIGHT_HAVE_CACHE_L2X0
select NEED_MACH_IO_H if PCI
select ARCH_HAS_CPUFREQ
+ select USE_OF
help
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
select ARM_VIC
select CPU_V6K
select DW_APB_TIMER
+ select DW_APB_TIMER_OF
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_TCM
select ARM_VIC
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
- select HAVE_MACH_CLKDEV
+ select COMMON_CLK
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
select ARM_AMBA
select ARM_VIC
select CPU_ARM926T
- select CLKDEV_LOOKUP
+ select COMMON_CLK
select GENERIC_CLOCKEVENTS
select PINCTRL
select MIGHT_HAVE_CACHE_L2X0
config ARCH_OMAP
bool "TI OMAP"
+ depends on MMU
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
select ARCH_HAS_CPUFREQ
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
- select HAVE_PWM
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
# Kconfigs may be included either alphabetically (according to the
# plat- suffix) or along side the corresponding mach-* source.
#
+source "arch/arm/mach-mvebu/Kconfig"
+
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcmring/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
-source "arch/arm/mach-lpc32xx/Kconfig"
-
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
bool
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
select COMMON_CLK
config PLAT_PXA
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 355 if ARCH_U8500
default 264 if MACH_H4700
+ default 512 if SOC_OMAP5
default 0
help
Maximum number of GPIOs in the system.
bootloaders, this option allows zImage to extract the information
from the ATAG list and store it at run time into the appended DTB.
+choice
+ prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+ default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
+ bool "Use bootloader kernel arguments if available"
+ help
+ Uses the command-line options passed by the boot loader instead of
+ the device tree bootargs property. If the boot loader doesn't provide
+ any, the device tree bootargs property will be used.
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
+ bool "Extend with bootloader kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to the the device tree bootargs property.
+
+endchoice
+
config CMDLINE
string "Default kernel command string"
default ""
config CPU_FREQ_IMX
tristate "CPUfreq driver for i.MX CPUs"
depends on ARCH_MXC && CPU_FREQ
+ select CPU_FREQ_TABLE
help
This enables the CPUfreq driver for i.MX CPUs.
Code Review / linux-3.10.git / blobdiff