BKL: remove extraneous #include <smp_lock.h>
[linux-3.10.git] / include / linux / sdla.h
1 /*
2  * INET         An implementation of the TCP/IP protocol suite for the LINUX
3  *              operating system.  INET is implemented using the  BSD Socket
4  *              interface as the means of communication with the user level.
5  *
6  *              Global definitions for the Frame relay interface.
7  *
8  * Version:     @(#)if_ifrad.h  0.20    13 Apr 96
9  *
10  * Author:      Mike McLagan <mike.mclagan@linux.org>
11  *
12  * Changes:
13  *              0.15    Mike McLagan    Structure packing
14  *
15  *              0.20    Mike McLagan    New flags for S508 buffer handling
16  *
17  *              This program is free software; you can redistribute it and/or
18  *              modify it under the terms of the GNU General Public License
19  *              as published by the Free Software Foundation; either version
20  *              2 of the License, or (at your option) any later version.
21  */
22
23 #ifndef SDLA_H
24 #define SDLA_H
25
26 /* adapter type */
27 #define SDLA_TYPES
28 #define SDLA_S502A                      5020
29 #define SDLA_S502E                      5021
30 #define SDLA_S503                       5030
31 #define SDLA_S507                       5070
32 #define SDLA_S508                       5080
33 #define SDLA_S509                       5090
34 #define SDLA_UNKNOWN                    -1
35
36 /* port selection flags for the S508 */
37 #define SDLA_S508_PORT_V35              0x00
38 #define SDLA_S508_PORT_RS232            0x02
39
40 /* Z80 CPU speeds */
41 #define SDLA_CPU_3M                     0x00
42 #define SDLA_CPU_5M                     0x01
43 #define SDLA_CPU_7M                     0x02
44 #define SDLA_CPU_8M                     0x03
45 #define SDLA_CPU_10M                    0x04
46 #define SDLA_CPU_16M                    0x05
47 #define SDLA_CPU_12M                    0x06
48
49 /* some private IOCTLs */
50 #define SDLA_IDENTIFY                   (FRAD_LAST_IOCTL + 1)
51 #define SDLA_CPUSPEED                   (FRAD_LAST_IOCTL + 2)
52 #define SDLA_PROTOCOL                   (FRAD_LAST_IOCTL + 3)
53
54 #define SDLA_CLEARMEM                   (FRAD_LAST_IOCTL + 4)
55 #define SDLA_WRITEMEM                   (FRAD_LAST_IOCTL + 5)
56 #define SDLA_READMEM                    (FRAD_LAST_IOCTL + 6)
57
58 struct sdla_mem {
59    int  addr;
60    int  len;
61    void __user *data;
62 };
63
64 #define SDLA_START                      (FRAD_LAST_IOCTL + 7)
65 #define SDLA_STOP                       (FRAD_LAST_IOCTL + 8)
66
67 /* some offsets in the Z80's memory space */
68 #define SDLA_NMIADDR                    0x0000
69 #define SDLA_CONF_ADDR                  0x0010
70 #define SDLA_S502A_NMIADDR              0x0066
71 #define SDLA_CODE_BASEADDR              0x0100
72 #define SDLA_WINDOW_SIZE                0x2000
73 #define SDLA_ADDR_MASK                  0x1FFF
74
75 /* largest handleable block of data */
76 #define SDLA_MAX_DATA                   4080
77 #define SDLA_MAX_MTU                    4072    /* MAX_DATA - sizeof(fradhdr) */
78 #define SDLA_MAX_DLCI                   24
79
80 /* this should be the same as frad_conf */
81 struct sdla_conf {
82    short station;
83    short config;
84    short kbaud;
85    short clocking;
86    short max_frm;
87    short T391;
88    short T392;
89    short N391;
90    short N392;
91    short N393;
92    short CIR_fwd;
93    short Bc_fwd;
94    short Be_fwd;
95    short CIR_bwd;
96    short Bc_bwd;
97    short Be_bwd;
98 };
99
100 /* this should be the same as dlci_conf */
101 struct sdla_dlci_conf {
102    short config;
103    short CIR_fwd;
104    short Bc_fwd;
105    short Be_fwd;
106    short CIR_bwd;
107    short Bc_bwd;
108    short Be_bwd; 
109    short Tc_fwd;
110    short Tc_bwd;
111    short Tf_max;
112    short Tb_max;
113 };
114
115 #ifndef __KERNEL__
116
117 void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet);
118
119 #else
120
121 /* important Z80 window addresses */
122 #define SDLA_CONTROL_WND                0xE000
123
124 #define SDLA_502_CMD_BUF                0xEF60
125 #define SDLA_502_RCV_BUF                0xA900
126 #define SDLA_502_TXN_AVAIL              0xFFF1
127 #define SDLA_502_RCV_AVAIL              0xFFF2
128 #define SDLA_502_EVENT_FLAGS            0xFFF3
129 #define SDLA_502_MDM_STATUS             0xFFF4
130 #define SDLA_502_IRQ_INTERFACE          0xFFFD
131 #define SDLA_502_IRQ_PERMISSION         0xFFFE
132 #define SDLA_502_DATA_OFS               0x0010
133
134 #define SDLA_508_CMD_BUF                0xE000
135 #define SDLA_508_TXBUF_INFO             0xF100
136 #define SDLA_508_RXBUF_INFO             0xF120
137 #define SDLA_508_EVENT_FLAGS            0xF003
138 #define SDLA_508_MDM_STATUS             0xF004
139 #define SDLA_508_IRQ_INTERFACE          0xF010
140 #define SDLA_508_IRQ_PERMISSION         0xF011
141 #define SDLA_508_TSE_OFFSET             0xF012
142
143 /* Event flags */
144 #define SDLA_EVENT_STATUS               0x01
145 #define SDLA_EVENT_DLCI_STATUS          0x02
146 #define SDLA_EVENT_BAD_DLCI             0x04
147 #define SDLA_EVENT_LINK_DOWN            0x40
148
149 /* IRQ Trigger flags */
150 #define SDLA_INTR_RX                    0x01
151 #define SDLA_INTR_TX                    0x02
152 #define SDLA_INTR_MODEM                 0x04
153 #define SDLA_INTR_COMPLETE              0x08
154 #define SDLA_INTR_STATUS                0x10
155 #define SDLA_INTR_TIMER                 0x20
156
157 /* DLCI status bits */
158 #define SDLA_DLCI_DELETED               0x01
159 #define SDLA_DLCI_ACTIVE                0x02
160 #define SDLA_DLCI_WAITING               0x04
161 #define SDLA_DLCI_NEW                   0x08
162 #define SDLA_DLCI_INCLUDED              0x40
163
164 /* valid command codes */
165 #define SDLA_INFORMATION_WRITE          0x01
166 #define SDLA_INFORMATION_READ           0x02
167 #define SDLA_ISSUE_IN_CHANNEL_SIGNAL    0x03
168 #define SDLA_SET_DLCI_CONFIGURATION     0x10
169 #define SDLA_READ_DLCI_CONFIGURATION    0x11
170 #define SDLA_DISABLE_COMMUNICATIONS     0x12
171 #define SDLA_ENABLE_COMMUNICATIONS      0x13
172 #define SDLA_READ_DLC_STATUS            0x14
173 #define SDLA_READ_DLC_STATISTICS        0x15
174 #define SDLA_FLUSH_DLC_STATISTICS       0x16
175 #define SDLA_LIST_ACTIVE_DLCI           0x17
176 #define SDLA_FLUSH_INFORMATION_BUFFERS  0x18
177 #define SDLA_ADD_DLCI                   0x20
178 #define SDLA_DELETE_DLCI                0x21
179 #define SDLA_ACTIVATE_DLCI              0x22
180 #define SDLA_DEACTIVATE_DLCI            0x23
181 #define SDLA_READ_MODEM_STATUS          0x30
182 #define SDLA_SET_MODEM_STATUS           0x31
183 #define SDLA_READ_COMMS_ERR_STATS       0x32
184 #define SDLA_FLUSH_COMMS_ERR_STATS      0x33
185 #define SDLA_READ_CODE_VERSION          0x40
186 #define SDLA_SET_IRQ_TRIGGER            0x50
187 #define SDLA_GET_IRQ_TRIGGER            0x51
188
189 /* In channel signal types */
190 #define SDLA_ICS_LINK_VERIFY            0x02
191 #define SDLA_ICS_STATUS_ENQ             0x03
192
193 /* modem status flags */
194 #define SDLA_MODEM_DTR_HIGH             0x01
195 #define SDLA_MODEM_RTS_HIGH             0x02
196 #define SDLA_MODEM_DCD_HIGH             0x08
197 #define SDLA_MODEM_CTS_HIGH             0x20
198
199 /* used for RET_MODEM interpretation */
200 #define SDLA_MODEM_DCD_LOW              0x01
201 #define SDLA_MODEM_CTS_LOW              0x02
202
203 /* return codes */
204 #define SDLA_RET_OK                     0x00
205 #define SDLA_RET_COMMUNICATIONS         0x01
206 #define SDLA_RET_CHANNEL_INACTIVE       0x02
207 #define SDLA_RET_DLCI_INACTIVE          0x03
208 #define SDLA_RET_DLCI_CONFIG            0x04
209 #define SDLA_RET_BUF_TOO_BIG            0x05
210 #define SDLA_RET_NO_DATA                0x05
211 #define SDLA_RET_BUF_OVERSIZE           0x06
212 #define SDLA_RET_CIR_OVERFLOW           0x07
213 #define SDLA_RET_NO_BUFS                0x08
214 #define SDLA_RET_TIMEOUT                0x0A
215 #define SDLA_RET_MODEM                  0x10
216 #define SDLA_RET_CHANNEL_OFF            0x11
217 #define SDLA_RET_CHANNEL_ON             0x12
218 #define SDLA_RET_DLCI_STATUS            0x13
219 #define SDLA_RET_DLCI_UNKNOWN           0x14
220 #define SDLA_RET_COMMAND_INVALID        0x1F
221
222 /* Configuration flags */
223 #define SDLA_DIRECT_RECV                0x0080
224 #define SDLA_TX_NO_EXCEPT               0x0020
225 #define SDLA_NO_ICF_MSGS                0x1000
226 #define SDLA_TX50_RX50                  0x0000
227 #define SDLA_TX70_RX30                  0x2000
228 #define SDLA_TX30_RX70                  0x4000
229
230 /* IRQ selection flags */
231 #define SDLA_IRQ_RECEIVE                0x01
232 #define SDLA_IRQ_TRANSMIT               0x02
233 #define SDLA_IRQ_MODEM_STAT             0x04
234 #define SDLA_IRQ_COMMAND                0x08
235 #define SDLA_IRQ_CHANNEL                0x10
236 #define SDLA_IRQ_TIMER                  0x20
237
238 /* definitions for PC memory mapping */
239 #define SDLA_8K_WINDOW                  0x01
240 #define SDLA_S502_SEG_A                 0x10
241 #define SDLA_S502_SEG_C                 0x20
242 #define SDLA_S502_SEG_D                 0x00
243 #define SDLA_S502_SEG_E                 0x30
244 #define SDLA_S507_SEG_A                 0x00
245 #define SDLA_S507_SEG_B                 0x40
246 #define SDLA_S507_SEG_C                 0x80
247 #define SDLA_S507_SEG_E                 0xC0
248 #define SDLA_S508_SEG_A                 0x00
249 #define SDLA_S508_SEG_C                 0x10
250 #define SDLA_S508_SEG_D                 0x08
251 #define SDLA_S508_SEG_E                 0x18
252
253 /* SDLA adapter port constants */
254 #define SDLA_IO_EXTENTS                 0x04
255         
256 #define SDLA_REG_CONTROL                0x00
257 #define SDLA_REG_PC_WINDOW              0x01    /* offset for PC window select latch */
258 #define SDLA_REG_Z80_WINDOW             0x02    /* offset for Z80 window select latch */
259 #define SDLA_REG_Z80_CONTROL            0x03    /* offset for Z80 control latch */
260         
261 #define SDLA_S502_STS                   0x00    /* status reg for 502, 502E, 507 */
262 #define SDLA_S508_GNRL                  0x00    /* general purp. reg for 508 */
263 #define SDLA_S508_STS                   0x01    /* status reg for 508 */
264 #define SDLA_S508_IDR                   0x02    /* ID reg for 508 */
265         
266 /* control register flags */
267 #define SDLA_S502A_START                0x00    /* start the CPU */
268 #define SDLA_S502A_INTREQ               0x02
269 #define SDLA_S502A_INTEN                0x04
270 #define SDLA_S502A_HALT                 0x08    /* halt the CPU */      
271 #define SDLA_S502A_NMI                  0x10    /* issue an NMI to the CPU */
272
273 #define SDLA_S502E_CPUEN                0x01
274 #define SDLA_S502E_ENABLE               0x02
275 #define SDLA_S502E_INTACK               0x04
276         
277 #define SDLA_S507_ENABLE                0x01
278 #define SDLA_S507_IRQ3                  0x00
279 #define SDLA_S507_IRQ4                  0x20
280 #define SDLA_S507_IRQ5                  0x40
281 #define SDLA_S507_IRQ7                  0x60
282 #define SDLA_S507_IRQ10                 0x80
283 #define SDLA_S507_IRQ11                 0xA0
284 #define SDLA_S507_IRQ12                 0xC0
285 #define SDLA_S507_IRQ15                 0xE0
286         
287 #define SDLA_HALT                       0x00
288 #define SDLA_CPUEN                      0x02
289 #define SDLA_MEMEN                      0x04
290 #define SDLA_S507_EPROMWR               0x08
291 #define SDLA_S507_EPROMCLK              0x10
292 #define SDLA_S508_INTRQ                 0x08
293 #define SDLA_S508_INTEN                 0x10
294
295 struct sdla_cmd {
296    char  opp_flag;
297    char  cmd;
298    short length;
299    char  retval;
300    short dlci;
301    char  flags;
302    short rxlost_int;
303    long  rxlost_app;
304    char  reserve[2];
305    char  data[SDLA_MAX_DATA];   /* transfer data buffer */
306 } __attribute__((packed));
307
308 struct intr_info {
309    char  flags;
310    short txlen;
311    char  irq;
312    char  flags2;
313    short timeout;
314 } __attribute__((packed));
315
316 /* found in the 508's control window at RXBUF_INFO */
317 struct buf_info {
318    unsigned short rse_num;
319    unsigned long  rse_base;
320    unsigned long  rse_next;
321    unsigned long  buf_base;
322    unsigned short reserved;
323    unsigned long  buf_top;
324 } __attribute__((packed));
325
326 /* structure pointed to by rse_base in RXBUF_INFO struct */
327 struct buf_entry {
328    char  opp_flag;
329    short length;
330    short dlci;
331    char  flags;
332    short timestamp;
333    short reserved[2];
334    long  buf_addr;
335 } __attribute__((packed));
336
337 #endif
338
339 #endif