jbd: Check return value of blkdev_issue_flush()
[linux-3.10.git] / fs / jbd / recovery.c
1 /*
2  * linux/fs/jbd/recovery.c
3  *
4  * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
5  *
6  * Copyright 1999-2000 Red Hat Software --- All Rights Reserved
7  *
8  * This file is part of the Linux kernel and is made available under
9  * the terms of the GNU General Public License, version 2, or at your
10  * option, any later version, incorporated herein by reference.
11  *
12  * Journal recovery routines for the generic filesystem journaling code;
13  * part of the ext2fs journaling system.
14  */
15
16 #ifndef __KERNEL__
17 #include "jfs_user.h"
18 #else
19 #include <linux/time.h>
20 #include <linux/fs.h>
21 #include <linux/jbd.h>
22 #include <linux/errno.h>
23 #include <linux/blkdev.h>
24 #endif
25
26 /*
27  * Maintain information about the progress of the recovery job, so that
28  * the different passes can carry information between them.
29  */
30 struct recovery_info
31 {
32         tid_t           start_transaction;
33         tid_t           end_transaction;
34
35         int             nr_replays;
36         int             nr_revokes;
37         int             nr_revoke_hits;
38 };
39
40 enum passtype {PASS_SCAN, PASS_REVOKE, PASS_REPLAY};
41 static int do_one_pass(journal_t *journal,
42                                 struct recovery_info *info, enum passtype pass);
43 static int scan_revoke_records(journal_t *, struct buffer_head *,
44                                 tid_t, struct recovery_info *);
45
46 #ifdef __KERNEL__
47
48 /* Release readahead buffers after use */
49 static void journal_brelse_array(struct buffer_head *b[], int n)
50 {
51         while (--n >= 0)
52                 brelse (b[n]);
53 }
54
55
56 /*
57  * When reading from the journal, we are going through the block device
58  * layer directly and so there is no readahead being done for us.  We
59  * need to implement any readahead ourselves if we want it to happen at
60  * all.  Recovery is basically one long sequential read, so make sure we
61  * do the IO in reasonably large chunks.
62  *
63  * This is not so critical that we need to be enormously clever about
64  * the readahead size, though.  128K is a purely arbitrary, good-enough
65  * fixed value.
66  */
67
68 #define MAXBUF 8
69 static int do_readahead(journal_t *journal, unsigned int start)
70 {
71         int err;
72         unsigned int max, nbufs, next;
73         unsigned int blocknr;
74         struct buffer_head *bh;
75
76         struct buffer_head * bufs[MAXBUF];
77
78         /* Do up to 128K of readahead */
79         max = start + (128 * 1024 / journal->j_blocksize);
80         if (max > journal->j_maxlen)
81                 max = journal->j_maxlen;
82
83         /* Do the readahead itself.  We'll submit MAXBUF buffer_heads at
84          * a time to the block device IO layer. */
85
86         nbufs = 0;
87
88         for (next = start; next < max; next++) {
89                 err = journal_bmap(journal, next, &blocknr);
90
91                 if (err) {
92                         printk (KERN_ERR "JBD: bad block at offset %u\n",
93                                 next);
94                         goto failed;
95                 }
96
97                 bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
98                 if (!bh) {
99                         err = -ENOMEM;
100                         goto failed;
101                 }
102
103                 if (!buffer_uptodate(bh) && !buffer_locked(bh)) {
104                         bufs[nbufs++] = bh;
105                         if (nbufs == MAXBUF) {
106                                 ll_rw_block(READ, nbufs, bufs);
107                                 journal_brelse_array(bufs, nbufs);
108                                 nbufs = 0;
109                         }
110                 } else
111                         brelse(bh);
112         }
113
114         if (nbufs)
115                 ll_rw_block(READ, nbufs, bufs);
116         err = 0;
117
118 failed:
119         if (nbufs)
120                 journal_brelse_array(bufs, nbufs);
121         return err;
122 }
123
124 #endif /* __KERNEL__ */
125
126
127 /*
128  * Read a block from the journal
129  */
130
131 static int jread(struct buffer_head **bhp, journal_t *journal,
132                  unsigned int offset)
133 {
134         int err;
135         unsigned int blocknr;
136         struct buffer_head *bh;
137
138         *bhp = NULL;
139
140         if (offset >= journal->j_maxlen) {
141                 printk(KERN_ERR "JBD: corrupted journal superblock\n");
142                 return -EIO;
143         }
144
145         err = journal_bmap(journal, offset, &blocknr);
146
147         if (err) {
148                 printk (KERN_ERR "JBD: bad block at offset %u\n",
149                         offset);
150                 return err;
151         }
152
153         bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
154         if (!bh)
155                 return -ENOMEM;
156
157         if (!buffer_uptodate(bh)) {
158                 /* If this is a brand new buffer, start readahead.
159                    Otherwise, we assume we are already reading it.  */
160                 if (!buffer_req(bh))
161                         do_readahead(journal, offset);
162                 wait_on_buffer(bh);
163         }
164
165         if (!buffer_uptodate(bh)) {
166                 printk (KERN_ERR "JBD: Failed to read block at offset %u\n",
167                         offset);
168                 brelse(bh);
169                 return -EIO;
170         }
171
172         *bhp = bh;
173         return 0;
174 }
175
176
177 /*
178  * Count the number of in-use tags in a journal descriptor block.
179  */
180
181 static int count_tags(struct buffer_head *bh, int size)
182 {
183         char *                  tagp;
184         journal_block_tag_t *   tag;
185         int                     nr = 0;
186
187         tagp = &bh->b_data[sizeof(journal_header_t)];
188
189         while ((tagp - bh->b_data + sizeof(journal_block_tag_t)) <= size) {
190                 tag = (journal_block_tag_t *) tagp;
191
192                 nr++;
193                 tagp += sizeof(journal_block_tag_t);
194                 if (!(tag->t_flags & cpu_to_be32(JFS_FLAG_SAME_UUID)))
195                         tagp += 16;
196
197                 if (tag->t_flags & cpu_to_be32(JFS_FLAG_LAST_TAG))
198                         break;
199         }
200
201         return nr;
202 }
203
204
205 /* Make sure we wrap around the log correctly! */
206 #define wrap(journal, var)                                              \
207 do {                                                                    \
208         if (var >= (journal)->j_last)                                   \
209                 var -= ((journal)->j_last - (journal)->j_first);        \
210 } while (0)
211
212 /**
213  * journal_recover - recovers a on-disk journal
214  * @journal: the journal to recover
215  *
216  * The primary function for recovering the log contents when mounting a
217  * journaled device.
218  *
219  * Recovery is done in three passes.  In the first pass, we look for the
220  * end of the log.  In the second, we assemble the list of revoke
221  * blocks.  In the third and final pass, we replay any un-revoked blocks
222  * in the log.
223  */
224 int journal_recover(journal_t *journal)
225 {
226         int                     err, err2;
227         journal_superblock_t *  sb;
228
229         struct recovery_info    info;
230
231         memset(&info, 0, sizeof(info));
232         sb = journal->j_superblock;
233
234         /*
235          * The journal superblock's s_start field (the current log head)
236          * is always zero if, and only if, the journal was cleanly
237          * unmounted.
238          */
239
240         if (!sb->s_start) {
241                 jbd_debug(1, "No recovery required, last transaction %d\n",
242                           be32_to_cpu(sb->s_sequence));
243                 journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
244                 return 0;
245         }
246
247         err = do_one_pass(journal, &info, PASS_SCAN);
248         if (!err)
249                 err = do_one_pass(journal, &info, PASS_REVOKE);
250         if (!err)
251                 err = do_one_pass(journal, &info, PASS_REPLAY);
252
253         jbd_debug(1, "JBD: recovery, exit status %d, "
254                   "recovered transactions %u to %u\n",
255                   err, info.start_transaction, info.end_transaction);
256         jbd_debug(1, "JBD: Replayed %d and revoked %d/%d blocks\n",
257                   info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
258
259         /* Restart the log at the next transaction ID, thus invalidating
260          * any existing commit records in the log. */
261         journal->j_transaction_sequence = ++info.end_transaction;
262
263         journal_clear_revoke(journal);
264         err2 = sync_blockdev(journal->j_fs_dev);
265         if (!err)
266                 err = err2;
267         /* Flush disk caches to get replayed data on the permanent storage */
268         if (journal->j_flags & JFS_BARRIER) {
269                 err2 = blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);
270                 if (!err)
271                         err = err2;
272         }
273
274         return err;
275 }
276
277 /**
278  * journal_skip_recovery - Start journal and wipe exiting records
279  * @journal: journal to startup
280  *
281  * Locate any valid recovery information from the journal and set up the
282  * journal structures in memory to ignore it (presumably because the
283  * caller has evidence that it is out of date).
284  * This function does'nt appear to be exorted..
285  *
286  * We perform one pass over the journal to allow us to tell the user how
287  * much recovery information is being erased, and to let us initialise
288  * the journal transaction sequence numbers to the next unused ID.
289  */
290 int journal_skip_recovery(journal_t *journal)
291 {
292         int                     err;
293         struct recovery_info    info;
294
295         memset (&info, 0, sizeof(info));
296
297         err = do_one_pass(journal, &info, PASS_SCAN);
298
299         if (err) {
300                 printk(KERN_ERR "JBD: error %d scanning journal\n", err);
301                 ++journal->j_transaction_sequence;
302         } else {
303 #ifdef CONFIG_JBD_DEBUG
304                 int dropped = info.end_transaction -
305                               be32_to_cpu(journal->j_superblock->s_sequence);
306                 jbd_debug(1,
307                           "JBD: ignoring %d transaction%s from the journal.\n",
308                           dropped, (dropped == 1) ? "" : "s");
309 #endif
310                 journal->j_transaction_sequence = ++info.end_transaction;
311         }
312
313         journal->j_tail = 0;
314         return err;
315 }
316
317 static int do_one_pass(journal_t *journal,
318                         struct recovery_info *info, enum passtype pass)
319 {
320         unsigned int            first_commit_ID, next_commit_ID;
321         unsigned int            next_log_block;
322         int                     err, success = 0;
323         journal_superblock_t *  sb;
324         journal_header_t *      tmp;
325         struct buffer_head *    bh;
326         unsigned int            sequence;
327         int                     blocktype;
328
329         /*
330          * First thing is to establish what we expect to find in the log
331          * (in terms of transaction IDs), and where (in terms of log
332          * block offsets): query the superblock.
333          */
334
335         sb = journal->j_superblock;
336         next_commit_ID = be32_to_cpu(sb->s_sequence);
337         next_log_block = be32_to_cpu(sb->s_start);
338
339         first_commit_ID = next_commit_ID;
340         if (pass == PASS_SCAN)
341                 info->start_transaction = first_commit_ID;
342
343         jbd_debug(1, "Starting recovery pass %d\n", pass);
344
345         /*
346          * Now we walk through the log, transaction by transaction,
347          * making sure that each transaction has a commit block in the
348          * expected place.  Each complete transaction gets replayed back
349          * into the main filesystem.
350          */
351
352         while (1) {
353                 int                     flags;
354                 char *                  tagp;
355                 journal_block_tag_t *   tag;
356                 struct buffer_head *    obh;
357                 struct buffer_head *    nbh;
358
359                 cond_resched();
360
361                 /* If we already know where to stop the log traversal,
362                  * check right now that we haven't gone past the end of
363                  * the log. */
364
365                 if (pass != PASS_SCAN)
366                         if (tid_geq(next_commit_ID, info->end_transaction))
367                                 break;
368
369                 jbd_debug(2, "Scanning for sequence ID %u at %u/%u\n",
370                           next_commit_ID, next_log_block, journal->j_last);
371
372                 /* Skip over each chunk of the transaction looking
373                  * either the next descriptor block or the final commit
374                  * record. */
375
376                 jbd_debug(3, "JBD: checking block %u\n", next_log_block);
377                 err = jread(&bh, journal, next_log_block);
378                 if (err)
379                         goto failed;
380
381                 next_log_block++;
382                 wrap(journal, next_log_block);
383
384                 /* What kind of buffer is it?
385                  *
386                  * If it is a descriptor block, check that it has the
387                  * expected sequence number.  Otherwise, we're all done
388                  * here. */
389
390                 tmp = (journal_header_t *)bh->b_data;
391
392                 if (tmp->h_magic != cpu_to_be32(JFS_MAGIC_NUMBER)) {
393                         brelse(bh);
394                         break;
395                 }
396
397                 blocktype = be32_to_cpu(tmp->h_blocktype);
398                 sequence = be32_to_cpu(tmp->h_sequence);
399                 jbd_debug(3, "Found magic %d, sequence %d\n",
400                           blocktype, sequence);
401
402                 if (sequence != next_commit_ID) {
403                         brelse(bh);
404                         break;
405                 }
406
407                 /* OK, we have a valid descriptor block which matches
408                  * all of the sequence number checks.  What are we going
409                  * to do with it?  That depends on the pass... */
410
411                 switch(blocktype) {
412                 case JFS_DESCRIPTOR_BLOCK:
413                         /* If it is a valid descriptor block, replay it
414                          * in pass REPLAY; otherwise, just skip over the
415                          * blocks it describes. */
416                         if (pass != PASS_REPLAY) {
417                                 next_log_block +=
418                                         count_tags(bh, journal->j_blocksize);
419                                 wrap(journal, next_log_block);
420                                 brelse(bh);
421                                 continue;
422                         }
423
424                         /* A descriptor block: we can now write all of
425                          * the data blocks.  Yay, useful work is finally
426                          * getting done here! */
427
428                         tagp = &bh->b_data[sizeof(journal_header_t)];
429                         while ((tagp - bh->b_data +sizeof(journal_block_tag_t))
430                                <= journal->j_blocksize) {
431                                 unsigned int io_block;
432
433                                 tag = (journal_block_tag_t *) tagp;
434                                 flags = be32_to_cpu(tag->t_flags);
435
436                                 io_block = next_log_block++;
437                                 wrap(journal, next_log_block);
438                                 err = jread(&obh, journal, io_block);
439                                 if (err) {
440                                         /* Recover what we can, but
441                                          * report failure at the end. */
442                                         success = err;
443                                         printk (KERN_ERR
444                                                 "JBD: IO error %d recovering "
445                                                 "block %u in log\n",
446                                                 err, io_block);
447                                 } else {
448                                         unsigned int blocknr;
449
450                                         J_ASSERT(obh != NULL);
451                                         blocknr = be32_to_cpu(tag->t_blocknr);
452
453                                         /* If the block has been
454                                          * revoked, then we're all done
455                                          * here. */
456                                         if (journal_test_revoke
457                                             (journal, blocknr,
458                                              next_commit_ID)) {
459                                                 brelse(obh);
460                                                 ++info->nr_revoke_hits;
461                                                 goto skip_write;
462                                         }
463
464                                         /* Find a buffer for the new
465                                          * data being restored */
466                                         nbh = __getblk(journal->j_fs_dev,
467                                                         blocknr,
468                                                         journal->j_blocksize);
469                                         if (nbh == NULL) {
470                                                 printk(KERN_ERR
471                                                        "JBD: Out of memory "
472                                                        "during recovery.\n");
473                                                 err = -ENOMEM;
474                                                 brelse(bh);
475                                                 brelse(obh);
476                                                 goto failed;
477                                         }
478
479                                         lock_buffer(nbh);
480                                         memcpy(nbh->b_data, obh->b_data,
481                                                         journal->j_blocksize);
482                                         if (flags & JFS_FLAG_ESCAPE) {
483                                                 *((__be32 *)nbh->b_data) =
484                                                 cpu_to_be32(JFS_MAGIC_NUMBER);
485                                         }
486
487                                         BUFFER_TRACE(nbh, "marking dirty");
488                                         set_buffer_uptodate(nbh);
489                                         mark_buffer_dirty(nbh);
490                                         BUFFER_TRACE(nbh, "marking uptodate");
491                                         ++info->nr_replays;
492                                         /* ll_rw_block(WRITE, 1, &nbh); */
493                                         unlock_buffer(nbh);
494                                         brelse(obh);
495                                         brelse(nbh);
496                                 }
497
498                         skip_write:
499                                 tagp += sizeof(journal_block_tag_t);
500                                 if (!(flags & JFS_FLAG_SAME_UUID))
501                                         tagp += 16;
502
503                                 if (flags & JFS_FLAG_LAST_TAG)
504                                         break;
505                         }
506
507                         brelse(bh);
508                         continue;
509
510                 case JFS_COMMIT_BLOCK:
511                         /* Found an expected commit block: not much to
512                          * do other than move on to the next sequence
513                          * number. */
514                         brelse(bh);
515                         next_commit_ID++;
516                         continue;
517
518                 case JFS_REVOKE_BLOCK:
519                         /* If we aren't in the REVOKE pass, then we can
520                          * just skip over this block. */
521                         if (pass != PASS_REVOKE) {
522                                 brelse(bh);
523                                 continue;
524                         }
525
526                         err = scan_revoke_records(journal, bh,
527                                                   next_commit_ID, info);
528                         brelse(bh);
529                         if (err)
530                                 goto failed;
531                         continue;
532
533                 default:
534                         jbd_debug(3, "Unrecognised magic %d, end of scan.\n",
535                                   blocktype);
536                         brelse(bh);
537                         goto done;
538                 }
539         }
540
541  done:
542         /*
543          * We broke out of the log scan loop: either we came to the
544          * known end of the log or we found an unexpected block in the
545          * log.  If the latter happened, then we know that the "current"
546          * transaction marks the end of the valid log.
547          */
548
549         if (pass == PASS_SCAN)
550                 info->end_transaction = next_commit_ID;
551         else {
552                 /* It's really bad news if different passes end up at
553                  * different places (but possible due to IO errors). */
554                 if (info->end_transaction != next_commit_ID) {
555                         printk (KERN_ERR "JBD: recovery pass %d ended at "
556                                 "transaction %u, expected %u\n",
557                                 pass, next_commit_ID, info->end_transaction);
558                         if (!success)
559                                 success = -EIO;
560                 }
561         }
562
563         return success;
564
565  failed:
566         return err;
567 }
568
569
570 /* Scan a revoke record, marking all blocks mentioned as revoked. */
571
572 static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
573                                tid_t sequence, struct recovery_info *info)
574 {
575         journal_revoke_header_t *header;
576         int offset, max;
577
578         header = (journal_revoke_header_t *) bh->b_data;
579         offset = sizeof(journal_revoke_header_t);
580         max = be32_to_cpu(header->r_count);
581
582         while (offset < max) {
583                 unsigned int blocknr;
584                 int err;
585
586                 blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset)));
587                 offset += 4;
588                 err = journal_set_revoke(journal, blocknr, sequence);
589                 if (err)
590                         return err;
591                 ++info->nr_revokes;
592         }
593         return 0;
594 }