[PATCH] remove many unneeded #includes of sched.h
[linux-3.10.git] / drivers / sbus / char / uctrl.c
1 /* $Id: uctrl.c,v 1.12 2001/10/08 22:19:51 davem Exp $
2  * uctrl.c: TS102 Microcontroller interface on Tadpole Sparcbook 3
3  *
4  * Copyright 1999 Derrick J Brashear (shadow@dementia.org)
5  */
6
7 #include <linux/module.h>
8 #include <linux/errno.h>
9 #include <linux/delay.h>
10 #include <linux/interrupt.h>
11 #include <linux/slab.h>
12 #include <linux/ioport.h>
13 #include <linux/init.h>
14 #include <linux/miscdevice.h>
15 #include <linux/mm.h>
16
17 #include <asm/openprom.h>
18 #include <asm/oplib.h>
19 #include <asm/system.h>
20 #include <asm/irq.h>
21 #include <asm/io.h>
22 #include <asm/pgtable.h>
23 #include <asm/sbus.h>
24
25 #define UCTRL_MINOR     174
26
27 #define DEBUG 1
28 #ifdef DEBUG
29 #define dprintk(x) printk x
30 #else
31 #define dprintk(x)
32 #endif
33
34 struct uctrl_regs {
35         volatile u32 uctrl_intr;
36         volatile u32 uctrl_data;
37         volatile u32 uctrl_stat;
38         volatile u32 uctrl_xxx[5];
39 };
40
41 struct ts102_regs {
42         volatile u32 card_a_intr;
43         volatile u32 card_a_stat;
44         volatile u32 card_a_ctrl;
45         volatile u32 card_a_xxx;
46         volatile u32 card_b_intr;
47         volatile u32 card_b_stat;
48         volatile u32 card_b_ctrl;
49         volatile u32 card_b_xxx;
50         volatile u32 uctrl_intr;
51         volatile u32 uctrl_data;
52         volatile u32 uctrl_stat;
53         volatile u32 uctrl_xxx;
54         volatile u32 ts102_xxx[4];
55 };
56
57 /* Bits for uctrl_intr register */
58 #define UCTRL_INTR_TXE_REQ         0x01    /* transmit FIFO empty int req */
59 #define UCTRL_INTR_TXNF_REQ        0x02    /* transmit FIFO not full int req */
60 #define UCTRL_INTR_RXNE_REQ        0x04    /* receive FIFO not empty int req */
61 #define UCTRL_INTR_RXO_REQ         0x08    /* receive FIFO overflow int req */
62 #define UCTRL_INTR_TXE_MSK         0x10    /* transmit FIFO empty mask */
63 #define UCTRL_INTR_TXNF_MSK        0x20    /* transmit FIFO not full mask */
64 #define UCTRL_INTR_RXNE_MSK        0x40    /* receive FIFO not empty mask */
65 #define UCTRL_INTR_RXO_MSK         0x80    /* receive FIFO overflow mask */
66
67 /* Bits for uctrl_stat register */
68 #define UCTRL_STAT_TXE_STA         0x01    /* transmit FIFO empty status */
69 #define UCTRL_STAT_TXNF_STA        0x02    /* transmit FIFO not full status */
70 #define UCTRL_STAT_RXNE_STA        0x04    /* receive FIFO not empty status */
71 #define UCTRL_STAT_RXO_STA         0x08    /* receive FIFO overflow status */
72
73 static const char *uctrl_extstatus[16] = {
74         "main power available",
75         "internal battery attached",
76         "external battery attached",
77         "external VGA attached",
78         "external keyboard attached",
79         "external mouse attached",
80         "lid down",
81         "internal battery currently charging",
82         "external battery currently charging",
83         "internal battery currently discharging",
84         "external battery currently discharging",
85 };
86
87 /* Everything required for one transaction with the uctrl */
88 struct uctrl_txn {
89         u8 opcode;
90         u8 inbits;
91         u8 outbits;
92         u8 *inbuf;
93         u8 *outbuf;
94 };
95
96 struct uctrl_status {
97         u8 current_temp; /* 0x07 */
98         u8 reset_status; /* 0x0b */
99         u16 event_status; /* 0x0c */
100         u16 error_status; /* 0x10 */
101         u16 external_status; /* 0x11, 0x1b */
102         u8 internal_charge; /* 0x18 */
103         u8 external_charge; /* 0x19 */
104         u16 control_lcd; /* 0x20 */
105         u8 control_bitport; /* 0x21 */
106         u8 speaker_volume; /* 0x23 */
107         u8 control_tft_brightness; /* 0x24 */
108         u8 control_kbd_repeat_delay; /* 0x28 */
109         u8 control_kbd_repeat_period; /* 0x29 */
110         u8 control_screen_contrast; /* 0x2F */
111 };
112
113 enum uctrl_opcode {
114   READ_SERIAL_NUMBER=0x1,
115   READ_ETHERNET_ADDRESS=0x2,
116   READ_HARDWARE_VERSION=0x3,
117   READ_MICROCONTROLLER_VERSION=0x4,
118   READ_MAX_TEMPERATURE=0x5,
119   READ_MIN_TEMPERATURE=0x6,
120   READ_CURRENT_TEMPERATURE=0x7,
121   READ_SYSTEM_VARIANT=0x8,
122   READ_POWERON_CYCLES=0x9,
123   READ_POWERON_SECONDS=0xA,
124   READ_RESET_STATUS=0xB,
125   READ_EVENT_STATUS=0xC,
126   READ_REAL_TIME_CLOCK=0xD,
127   READ_EXTERNAL_VGA_PORT=0xE,
128   READ_MICROCONTROLLER_ROM_CHECKSUM=0xF,
129   READ_ERROR_STATUS=0x10,
130   READ_EXTERNAL_STATUS=0x11,
131   READ_USER_CONFIGURATION_AREA=0x12,
132   READ_MICROCONTROLLER_VOLTAGE=0x13,
133   READ_INTERNAL_BATTERY_VOLTAGE=0x14,
134   READ_DCIN_VOLTAGE=0x15,
135   READ_HORIZONTAL_POINTER_VOLTAGE=0x16,
136   READ_VERTICAL_POINTER_VOLTAGE=0x17,
137   READ_INTERNAL_BATTERY_CHARGE_LEVEL=0x18,
138   READ_EXTERNAL_BATTERY_CHARGE_LEVEL=0x19,
139   READ_REAL_TIME_CLOCK_ALARM=0x1A,
140   READ_EVENT_STATUS_NO_RESET=0x1B,
141   READ_INTERNAL_KEYBOARD_LAYOUT=0x1C,
142   READ_EXTERNAL_KEYBOARD_LAYOUT=0x1D,
143   READ_EEPROM_STATUS=0x1E,
144   CONTROL_LCD=0x20,
145   CONTROL_BITPORT=0x21,
146   SPEAKER_VOLUME=0x23,
147   CONTROL_TFT_BRIGHTNESS=0x24,
148   CONTROL_WATCHDOG=0x25,
149   CONTROL_FACTORY_EEPROM_AREA=0x26,
150   CONTROL_KBD_TIME_UNTIL_REPEAT=0x28,
151   CONTROL_KBD_TIME_BETWEEN_REPEATS=0x29,
152   CONTROL_TIMEZONE=0x2A,
153   CONTROL_MARK_SPACE_RATIO=0x2B,
154   CONTROL_DIAGNOSTIC_MODE=0x2E,
155   CONTROL_SCREEN_CONTRAST=0x2F,
156   RING_BELL=0x30,
157   SET_DIAGNOSTIC_STATUS=0x32,
158   CLEAR_KEY_COMBINATION_TABLE=0x33,
159   PERFORM_SOFTWARE_RESET=0x34,
160   SET_REAL_TIME_CLOCK=0x35,
161   RECALIBRATE_POINTING_STICK=0x36,
162   SET_BELL_FREQUENCY=0x37,
163   SET_INTERNAL_BATTERY_CHARGE_RATE=0x39,
164   SET_EXTERNAL_BATTERY_CHARGE_RATE=0x3A,
165   SET_REAL_TIME_CLOCK_ALARM=0x3B,
166   READ_EEPROM=0x40,
167   WRITE_EEPROM=0x41,
168   WRITE_TO_STATUS_DISPLAY=0x42,
169   DEFINE_SPECIAL_CHARACTER=0x43,
170   DEFINE_KEY_COMBINATION_ENTRY=0x50,
171   DEFINE_STRING_TABLE_ENTRY=0x51,
172   DEFINE_STATUS_SCREEN_DISPLAY=0x52,
173   PERFORM_EMU_COMMANDS=0x64,
174   READ_EMU_REGISTER=0x65,
175   WRITE_EMU_REGISTER=0x66,
176   READ_EMU_RAM=0x67,
177   WRITE_EMU_RAM=0x68,
178   READ_BQ_REGISTER=0x69,
179   WRITE_BQ_REGISTER=0x6A,
180   SET_USER_PASSWORD=0x70,
181   VERIFY_USER_PASSWORD=0x71,
182   GET_SYSTEM_PASSWORD_KEY=0x72,
183   VERIFY_SYSTEM_PASSWORD=0x73,
184   POWER_OFF=0x82,
185   POWER_RESTART=0x83,
186 };
187
188 struct uctrl_driver {
189         struct uctrl_regs *regs;
190         int irq;
191         int pending;
192         struct uctrl_status status;
193 };
194
195 static struct uctrl_driver drv;
196
197 void uctrl_get_event_status(void);
198 void uctrl_get_external_status(void);
199
200 static int
201 uctrl_ioctl(struct inode *inode, struct file *file,
202               unsigned int cmd, unsigned long arg)
203 {
204         switch (cmd) {
205                 default:
206                         return -EINVAL;
207         }
208         return 0;
209 }
210
211 static int
212 uctrl_open(struct inode *inode, struct file *file)
213 {
214         uctrl_get_event_status();
215         uctrl_get_external_status();
216         return 0;
217 }
218
219 static irqreturn_t uctrl_interrupt(int irq, void *dev_id)
220 {
221         struct uctrl_driver *driver = (struct uctrl_driver *)dev_id;
222         printk("in uctrl_interrupt\n");
223         return IRQ_HANDLED;
224 }
225
226 static const struct file_operations uctrl_fops = {
227         .owner =        THIS_MODULE,
228         .llseek =       no_llseek,
229         .ioctl =        uctrl_ioctl,
230         .open =         uctrl_open,
231 };
232
233 static struct miscdevice uctrl_dev = {
234         UCTRL_MINOR,
235         "uctrl",
236         &uctrl_fops
237 };
238
239 /* Wait for space to write, then write to it */
240 #define WRITEUCTLDATA(value) \
241 { \
242   unsigned int i; \
243   for (i = 0; i < 10000; i++) { \
244     if (UCTRL_STAT_TXNF_STA & driver->regs->uctrl_stat) \
245       break; \
246   } \
247   dprintk(("write data 0x%02x\n", value)); \
248   driver->regs->uctrl_data = value; \
249 }
250
251 /* Wait for something to read, read it, then clear the bit */
252 #define READUCTLDATA(value) \
253 { \
254   unsigned int i; \
255   value = 0; \
256   for (i = 0; i < 10000; i++) { \
257     if ((UCTRL_STAT_RXNE_STA & driver->regs->uctrl_stat) == 0) \
258       break; \
259     udelay(1); \
260   } \
261   value = driver->regs->uctrl_data; \
262   dprintk(("read data 0x%02x\n", value)); \
263   driver->regs->uctrl_stat = UCTRL_STAT_RXNE_STA; \
264 }
265
266 void uctrl_set_video(int status)
267 {
268         struct uctrl_driver *driver = &drv;
269         
270 }
271
272 static void uctrl_do_txn(struct uctrl_txn *txn)
273 {
274         struct uctrl_driver *driver = &drv;
275         int stat, incnt, outcnt, bytecnt, intr;
276         u32 byte;
277
278         stat = driver->regs->uctrl_stat;
279         intr = driver->regs->uctrl_intr;
280         driver->regs->uctrl_stat = stat;
281
282         dprintk(("interrupt stat 0x%x int 0x%x\n", stat, intr));
283
284         incnt = txn->inbits;
285         outcnt = txn->outbits;
286         byte = (txn->opcode << 8);
287         WRITEUCTLDATA(byte);
288
289         bytecnt = 0;
290         while (incnt > 0) {
291                 byte = (txn->inbuf[bytecnt] << 8);
292                 WRITEUCTLDATA(byte);
293                 incnt--;
294                 bytecnt++;
295         }
296
297         /* Get the ack */
298         READUCTLDATA(byte);
299         dprintk(("ack was %x\n", (byte >> 8)));
300
301         bytecnt = 0;
302         while (outcnt > 0) {
303                 READUCTLDATA(byte);
304                 txn->outbuf[bytecnt] = (byte >> 8);
305                 dprintk(("set byte to %02x\n", byte));
306                 outcnt--;
307                 bytecnt++;
308         }
309 }
310
311 void uctrl_get_event_status(void)
312 {
313         struct uctrl_driver *driver = &drv;
314         struct uctrl_txn txn;
315         u8 outbits[2];
316
317         txn.opcode = READ_EVENT_STATUS;
318         txn.inbits = 0;
319         txn.outbits = 2;
320         txn.inbuf = NULL;
321         txn.outbuf = outbits;
322
323         uctrl_do_txn(&txn);
324
325         dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
326         driver->status.event_status = 
327                 ((outbits[0] & 0xff) << 8) | (outbits[1] & 0xff);
328         dprintk(("ev is %x\n", driver->status.event_status));
329 }
330
331 void uctrl_get_external_status(void)
332 {
333         struct uctrl_driver *driver = &drv;
334         struct uctrl_txn txn;
335         u8 outbits[2];
336         int i, v;
337
338         txn.opcode = READ_EXTERNAL_STATUS;
339         txn.inbits = 0;
340         txn.outbits = 2;
341         txn.inbuf = NULL;
342         txn.outbuf = outbits;
343
344         uctrl_do_txn(&txn);
345
346         dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
347         driver->status.external_status = 
348                 ((outbits[0] * 256) + (outbits[1]));
349         dprintk(("ex is %x\n", driver->status.external_status));
350         v = driver->status.external_status;
351         for (i = 0; v != 0; i++, v >>= 1) {
352                 if (v & 1) {
353                         dprintk(("%s%s", " ", uctrl_extstatus[i]));
354                 }
355         }
356         dprintk(("\n"));
357         
358 }
359
360 static int __init ts102_uctrl_init(void)
361 {
362         struct uctrl_driver *driver = &drv;
363         int len, i;
364         struct linux_prom_irqs tmp_irq[2];
365         unsigned int vaddr[2] = { 0, 0 };
366         int tmpnode, uctrlnode = prom_getchild(prom_root_node);
367
368         tmpnode = prom_searchsiblings(uctrlnode, "obio");
369
370         if (tmpnode)
371           uctrlnode = prom_getchild(tmpnode);
372
373         uctrlnode = prom_searchsiblings(uctrlnode, "uctrl");
374
375         if (!uctrlnode)
376                 return -ENODEV;
377
378         /* the prom mapped it for us */
379         len = prom_getproperty(uctrlnode, "address", (void *) vaddr,
380                                sizeof(vaddr));
381         driver->regs = (struct uctrl_regs *)vaddr[0];
382
383         len = prom_getproperty(uctrlnode, "intr", (char *) tmp_irq,
384                                sizeof(tmp_irq));
385
386         /* Flush device */
387         READUCTLDATA(len);
388
389         if(!driver->irq) 
390                 driver->irq = tmp_irq[0].pri;
391
392         request_irq(driver->irq, uctrl_interrupt, 0, "uctrl", driver);
393
394         if (misc_register(&uctrl_dev)) {
395                 printk("%s: unable to get misc minor %d\n",
396                        __FUNCTION__, uctrl_dev.minor);
397                 free_irq(driver->irq, driver);
398                 return -ENODEV;
399         }
400
401         driver->regs->uctrl_intr = UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK;
402         printk("uctrl: 0x%p (irq %d)\n", driver->regs, driver->irq);
403         uctrl_get_event_status();
404         uctrl_get_external_status();
405         return 0;
406 }
407
408 static void __exit ts102_uctrl_cleanup(void)
409 {
410         struct uctrl_driver *driver = &drv;
411
412         misc_deregister(&uctrl_dev);
413         if (driver->irq)
414                 free_irq(driver->irq, driver);
415         if (driver->regs)
416                 driver->regs = NULL;
417 }
418
419 module_init(ts102_uctrl_init);
420 module_exit(ts102_uctrl_cleanup);
421 MODULE_LICENSE("GPL");