f04b53cb023f96ef6db0f728d93c906ed5f6cb12
[linux-3.10.git] / drivers / ide / ide.c
1 /*
2  *  Copyright (C) 1994-1998         Linus Torvalds & authors (see below)
3  *  Copyrifht (C) 2003-2005, 2007   Bartlomiej Zolnierkiewicz
4  */
5
6 /*
7  *  Mostly written by Mark Lord  <mlord@pobox.com>
8  *                and Gadi Oxman <gadio@netvision.net.il>
9  *                and Andre Hedrick <andre@linux-ide.org>
10  *
11  *  See linux/MAINTAINERS for address of current maintainer.
12  *
13  * This is the multiple IDE interface driver, as evolved from hd.c.
14  * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
15  *   (usually 14 & 15).
16  * There can be up to two drives per interface, as per the ATA-2 spec.
17  *
18  * ...
19  *
20  *  From hd.c:
21  *  |
22  *  | It traverses the request-list, using interrupts to jump between functions.
23  *  | As nearly all functions can be called within interrupts, we may not sleep.
24  *  | Special care is recommended.  Have Fun!
25  *  |
26  *  | modified by Drew Eckhardt to check nr of hd's from the CMOS.
27  *  |
28  *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
29  *  | in the early extended-partition checks and added DM partitions.
30  *  |
31  *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
32  *  |
33  *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
34  *  | and general streamlining by Mark Lord (mlord@pobox.com).
35  *
36  *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
37  *
38  *      Mark Lord       (mlord@pobox.com)               (IDE Perf.Pkg)
39  *      Delman Lee      (delman@ieee.org)               ("Mr. atdisk2")
40  *      Scott Snyder    (snyder@fnald0.fnal.gov)        (ATAPI IDE cd-rom)
41  *
42  *  This was a rewrite of just about everything from hd.c, though some original
43  *  code is still sprinkled about.  Think of it as a major evolution, with
44  *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
45  */
46
47 #define _IDE_C                  /* Tell ide.h it's really us */
48
49 #include <linux/module.h>
50 #include <linux/types.h>
51 #include <linux/string.h>
52 #include <linux/kernel.h>
53 #include <linux/timer.h>
54 #include <linux/mm.h>
55 #include <linux/interrupt.h>
56 #include <linux/major.h>
57 #include <linux/errno.h>
58 #include <linux/genhd.h>
59 #include <linux/blkpg.h>
60 #include <linux/slab.h>
61 #include <linux/init.h>
62 #include <linux/pci.h>
63 #include <linux/delay.h>
64 #include <linux/ide.h>
65 #include <linux/completion.h>
66 #include <linux/reboot.h>
67 #include <linux/cdrom.h>
68 #include <linux/seq_file.h>
69 #include <linux/device.h>
70 #include <linux/bitops.h>
71
72 #include <asm/byteorder.h>
73 #include <asm/irq.h>
74 #include <asm/uaccess.h>
75 #include <asm/io.h>
76
77
78 /* default maximum number of failures */
79 #define IDE_DEFAULT_MAX_FAILURES        1
80
81 struct class *ide_port_class;
82
83 static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
84                                         IDE2_MAJOR, IDE3_MAJOR,
85                                         IDE4_MAJOR, IDE5_MAJOR,
86                                         IDE6_MAJOR, IDE7_MAJOR,
87                                         IDE8_MAJOR, IDE9_MAJOR };
88
89 static int idebus_parameter;    /* holds the "idebus=" parameter */
90 static int system_bus_speed;    /* holds what we think is VESA/PCI bus speed */
91
92 DEFINE_MUTEX(ide_cfg_mtx);
93  __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
94
95 int noautodma = 0;
96
97 #ifdef CONFIG_BLK_DEV_IDEACPI
98 int ide_noacpi = 0;
99 int ide_noacpitfs = 1;
100 int ide_noacpionboot = 1;
101 #endif
102
103 ide_hwif_t ide_hwifs[MAX_HWIFS];        /* master data repository */
104
105 static void ide_port_init_devices_data(ide_hwif_t *);
106
107 /*
108  * Do not even *think* about calling this!
109  */
110 void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
111 {
112         /* bulk initialize hwif & drive info with zeros */
113         memset(hwif, 0, sizeof(ide_hwif_t));
114
115         /* fill in any non-zero initial values */
116         hwif->index     = index;
117         hwif->major     = ide_hwif_to_major[index];
118
119         hwif->name[0]   = 'i';
120         hwif->name[1]   = 'd';
121         hwif->name[2]   = 'e';
122         hwif->name[3]   = '0' + index;
123
124         hwif->bus_state = BUSSTATE_ON;
125
126         init_completion(&hwif->gendev_rel_comp);
127
128         default_hwif_iops(hwif);
129         default_hwif_transport(hwif);
130
131         ide_port_init_devices_data(hwif);
132 }
133 EXPORT_SYMBOL_GPL(ide_init_port_data);
134
135 static void ide_port_init_devices_data(ide_hwif_t *hwif)
136 {
137         int unit;
138
139         for (unit = 0; unit < MAX_DRIVES; ++unit) {
140                 ide_drive_t *drive = &hwif->drives[unit];
141                 u8 j = (hwif->index * MAX_DRIVES) + unit;
142
143                 memset(drive, 0, sizeof(*drive));
144
145                 drive->media                    = ide_disk;
146                 drive->select.all               = (unit<<4)|0xa0;
147                 drive->hwif                     = hwif;
148                 drive->ctl                      = 0x08;
149                 drive->ready_stat               = READY_STAT;
150                 drive->bad_wstat                = BAD_W_STAT;
151                 drive->special.b.recalibrate    = 1;
152                 drive->special.b.set_geometry   = 1;
153                 drive->name[0]                  = 'h';
154                 drive->name[1]                  = 'd';
155                 drive->name[2]                  = 'a' + j;
156                 drive->max_failures             = IDE_DEFAULT_MAX_FAILURES;
157
158                 INIT_LIST_HEAD(&drive->list);
159                 init_completion(&drive->gendev_rel_comp);
160         }
161 }
162
163 /*
164  * init_ide_data() sets reasonable default values into all fields
165  * of all instances of the hwifs and drives, but only on the first call.
166  * Subsequent calls have no effect (they don't wipe out anything).
167  *
168  * This routine is normally called at driver initialization time,
169  * but may also be called MUCH earlier during kernel "command-line"
170  * parameter processing.  As such, we cannot depend on any other parts
171  * of the kernel (such as memory allocation) to be functioning yet.
172  *
173  * This is too bad, as otherwise we could dynamically allocate the
174  * ide_drive_t structs as needed, rather than always consuming memory
175  * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them.
176  *
177  * FIXME: We should stuff the setup data into __init and copy the
178  * relevant hwifs/allocate them properly during boot.
179  */
180 #define MAGIC_COOKIE 0x12345678
181 static void __init init_ide_data (void)
182 {
183         unsigned int index;
184         static unsigned long magic_cookie = MAGIC_COOKIE;
185
186         if (magic_cookie != MAGIC_COOKIE)
187                 return;         /* already initialized */
188         magic_cookie = 0;
189
190         /* Initialise all interface structures */
191         for (index = 0; index < MAX_HWIFS; ++index) {
192                 ide_hwif_t *hwif = &ide_hwifs[index];
193
194                 ide_init_port_data(hwif, index);
195         }
196 }
197
198 /**
199  *      ide_system_bus_speed    -       guess bus speed
200  *
201  *      ide_system_bus_speed() returns what we think is the system VESA/PCI
202  *      bus speed (in MHz). This is used for calculating interface PIO timings.
203  *      The default is 40 for known PCI systems, 50 otherwise.
204  *      The "idebus=xx" parameter can be used to override this value.
205  *      The actual value to be used is computed/displayed the first time
206  *      through. Drivers should only use this as a last resort.
207  *
208  *      Returns a guessed speed in MHz.
209  */
210
211 static int ide_system_bus_speed(void)
212 {
213 #ifdef CONFIG_PCI
214         static struct pci_device_id pci_default[] = {
215                 { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) },
216                 { }
217         };
218 #else
219 #define pci_default 0
220 #endif /* CONFIG_PCI */
221
222         /* user supplied value */
223         if (idebus_parameter)
224                 return idebus_parameter;
225
226         /* safe default value for PCI or VESA and PCI*/
227         return pci_dev_present(pci_default) ? 33 : 50;
228 }
229
230 static struct resource* hwif_request_region(ide_hwif_t *hwif,
231                                             unsigned long addr, int num)
232 {
233         struct resource *res = request_region(addr, num, hwif->name);
234
235         if (!res)
236                 printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
237                                 hwif->name, addr, addr+num-1);
238         return res;
239 }
240
241 /**
242  *      ide_hwif_request_regions - request resources for IDE
243  *      @hwif: interface to use
244  *
245  *      Requests all the needed resources for an interface.
246  *      Right now core IDE code does this work which is deeply wrong.
247  *      MMIO leaves it to the controller driver,
248  *      PIO will migrate this way over time.
249  */
250
251 int ide_hwif_request_regions(ide_hwif_t *hwif)
252 {
253         unsigned long addr;
254
255         if (hwif->mmio)
256                 return 0;
257
258         addr = hwif->io_ports[IDE_CONTROL_OFFSET];
259
260         if (addr && !hwif_request_region(hwif, addr, 1))
261                 goto control_region_busy;
262
263         addr = hwif->io_ports[IDE_DATA_OFFSET];
264         BUG_ON((addr | 7) != hwif->io_ports[IDE_STATUS_OFFSET]);
265
266         if (!hwif_request_region(hwif, addr, 8))
267                 goto data_region_busy;
268
269         return 0;
270
271 data_region_busy:
272         addr = hwif->io_ports[IDE_CONTROL_OFFSET];
273         if (addr)
274                 release_region(addr, 1);
275 control_region_busy:
276         /* If any errors are return, we drop the hwif interface. */
277         return -EBUSY;
278 }
279
280 /**
281  *      ide_hwif_release_regions - free IDE resources
282  *
283  *      Note that we only release the standard ports,
284  *      and do not even try to handle any extra ports
285  *      allocated for weird IDE interface chipsets.
286  *
287  *      Note also that we don't yet handle mmio resources here. More
288  *      importantly our caller should be doing this so we need to 
289  *      restructure this as a helper function for drivers.
290  */
291
292 void ide_hwif_release_regions(ide_hwif_t *hwif)
293 {
294         if (hwif->mmio)
295                 return;
296
297         if (hwif->io_ports[IDE_CONTROL_OFFSET])
298                 release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
299
300         release_region(hwif->io_ports[IDE_DATA_OFFSET], 8);
301 }
302
303 void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
304 {
305         ide_hwgroup_t *hwgroup = hwif->hwgroup;
306
307         spin_lock_irq(&ide_lock);
308         /*
309          * Remove us from the hwgroup, and free
310          * the hwgroup if we were the only member
311          */
312         if (hwif->next == hwif) {
313                 BUG_ON(hwgroup->hwif != hwif);
314                 kfree(hwgroup);
315         } else {
316                 /* There is another interface in hwgroup.
317                  * Unlink us, and set hwgroup->drive and ->hwif to
318                  * something sane.
319                  */
320                 ide_hwif_t *g = hwgroup->hwif;
321
322                 while (g->next != hwif)
323                         g = g->next;
324                 g->next = hwif->next;
325                 if (hwgroup->hwif == hwif) {
326                         /* Chose a random hwif for hwgroup->hwif.
327                          * It's guaranteed that there are no drives
328                          * left in the hwgroup.
329                          */
330                         BUG_ON(hwgroup->drive != NULL);
331                         hwgroup->hwif = g;
332                 }
333                 BUG_ON(hwgroup->hwif == hwif);
334         }
335         spin_unlock_irq(&ide_lock);
336 }
337
338 /* Called with ide_lock held. */
339 static void __ide_port_unregister_devices(ide_hwif_t *hwif)
340 {
341         int i;
342
343         for (i = 0; i < MAX_DRIVES; i++) {
344                 ide_drive_t *drive = &hwif->drives[i];
345
346                 if (drive->present) {
347                         spin_unlock_irq(&ide_lock);
348                         device_unregister(&drive->gendev);
349                         wait_for_completion(&drive->gendev_rel_comp);
350                         spin_lock_irq(&ide_lock);
351                 }
352         }
353 }
354
355 void ide_port_unregister_devices(ide_hwif_t *hwif)
356 {
357         mutex_lock(&ide_cfg_mtx);
358         spin_lock_irq(&ide_lock);
359         __ide_port_unregister_devices(hwif);
360         hwif->present = 0;
361         ide_port_init_devices_data(hwif);
362         spin_unlock_irq(&ide_lock);
363         mutex_unlock(&ide_cfg_mtx);
364 }
365 EXPORT_SYMBOL_GPL(ide_port_unregister_devices);
366
367 /**
368  *      ide_unregister          -       free an IDE interface
369  *      @index: index of interface (will change soon to a pointer)
370  *
371  *      Perform the final unregister of an IDE interface. At the moment
372  *      we don't refcount interfaces so this will also get split up.
373  *
374  *      Locking:
375  *      The caller must not hold the IDE locks
376  *      The drive present/vanishing is not yet properly locked
377  *      Take care with the callbacks. These have been split to avoid
378  *      deadlocking the IDE layer. The shutdown callback is called
379  *      before we take the lock and free resources. It is up to the
380  *      caller to be sure there is no pending I/O here, and that
381  *      the interface will not be reopened (present/vanishing locking
382  *      isn't yet done BTW). After we commit to the final kill we
383  *      call the cleanup callback with the ide locks held.
384  *
385  *      Unregister restores the hwif structures to the default state.
386  *      This is raving bonkers.
387  */
388
389 void ide_unregister(unsigned int index)
390 {
391         ide_hwif_t *hwif, *g;
392         ide_hwgroup_t *hwgroup;
393         int irq_count = 0;
394
395         BUG_ON(index >= MAX_HWIFS);
396
397         BUG_ON(in_interrupt());
398         BUG_ON(irqs_disabled());
399         mutex_lock(&ide_cfg_mtx);
400         spin_lock_irq(&ide_lock);
401         hwif = &ide_hwifs[index];
402         if (!hwif->present)
403                 goto abort;
404         __ide_port_unregister_devices(hwif);
405         hwif->present = 0;
406
407         spin_unlock_irq(&ide_lock);
408
409         ide_proc_unregister_port(hwif);
410
411         hwgroup = hwif->hwgroup;
412         /*
413          * free the irq if we were the only hwif using it
414          */
415         g = hwgroup->hwif;
416         do {
417                 if (g->irq == hwif->irq)
418                         ++irq_count;
419                 g = g->next;
420         } while (g != hwgroup->hwif);
421         if (irq_count == 1)
422                 free_irq(hwif->irq, hwgroup);
423
424         ide_remove_port_from_hwgroup(hwif);
425
426         device_unregister(hwif->portdev);
427         device_unregister(&hwif->gendev);
428         wait_for_completion(&hwif->gendev_rel_comp);
429
430         /*
431          * Remove us from the kernel's knowledge
432          */
433         blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
434         kfree(hwif->sg_table);
435         unregister_blkdev(hwif->major, hwif->name);
436         spin_lock_irq(&ide_lock);
437
438         if (hwif->dma_base)
439                 (void)ide_release_dma(hwif);
440
441         ide_hwif_release_regions(hwif);
442
443         /* restore hwif data to pristine status */
444         ide_init_port_data(hwif, index);
445
446 abort:
447         spin_unlock_irq(&ide_lock);
448         mutex_unlock(&ide_cfg_mtx);
449 }
450
451 EXPORT_SYMBOL(ide_unregister);
452
453 void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
454 {
455         memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));
456         hwif->irq = hw->irq;
457         hwif->noprobe = 0;
458         hwif->chipset = hw->chipset;
459         hwif->gendev.parent = hw->dev;
460         hwif->ack_intr = hw->ack_intr;
461 }
462 EXPORT_SYMBOL_GPL(ide_init_port_hw);
463
464 /*
465  *      Locks for IDE setting functionality
466  */
467
468 DEFINE_MUTEX(ide_setting_mtx);
469
470 EXPORT_SYMBOL_GPL(ide_setting_mtx);
471
472 /**
473  *      ide_spin_wait_hwgroup   -       wait for group
474  *      @drive: drive in the group
475  *
476  *      Wait for an IDE device group to go non busy and then return
477  *      holding the ide_lock which guards the hwgroup->busy status
478  *      and right to use it.
479  */
480
481 int ide_spin_wait_hwgroup (ide_drive_t *drive)
482 {
483         ide_hwgroup_t *hwgroup = HWGROUP(drive);
484         unsigned long timeout = jiffies + (3 * HZ);
485
486         spin_lock_irq(&ide_lock);
487
488         while (hwgroup->busy) {
489                 unsigned long lflags;
490                 spin_unlock_irq(&ide_lock);
491                 local_irq_set(lflags);
492                 if (time_after(jiffies, timeout)) {
493                         local_irq_restore(lflags);
494                         printk(KERN_ERR "%s: channel busy\n", drive->name);
495                         return -EBUSY;
496                 }
497                 local_irq_restore(lflags);
498                 spin_lock_irq(&ide_lock);
499         }
500         return 0;
501 }
502
503 EXPORT_SYMBOL(ide_spin_wait_hwgroup);
504
505 int set_io_32bit(ide_drive_t *drive, int arg)
506 {
507         if (drive->no_io_32bit)
508                 return -EPERM;
509
510         if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
511                 return -EINVAL;
512
513         if (ide_spin_wait_hwgroup(drive))
514                 return -EBUSY;
515
516         drive->io_32bit = arg;
517
518         spin_unlock_irq(&ide_lock);
519
520         return 0;
521 }
522
523 static int set_ksettings(ide_drive_t *drive, int arg)
524 {
525         if (arg < 0 || arg > 1)
526                 return -EINVAL;
527
528         if (ide_spin_wait_hwgroup(drive))
529                 return -EBUSY;
530         drive->keep_settings = arg;
531         spin_unlock_irq(&ide_lock);
532
533         return 0;
534 }
535
536 int set_using_dma(ide_drive_t *drive, int arg)
537 {
538 #ifdef CONFIG_BLK_DEV_IDEDMA
539         ide_hwif_t *hwif = drive->hwif;
540         int err = -EPERM;
541
542         if (arg < 0 || arg > 1)
543                 return -EINVAL;
544
545         if (!drive->id || !(drive->id->capability & 1))
546                 goto out;
547
548         if (hwif->dma_host_set == NULL)
549                 goto out;
550
551         err = -EBUSY;
552         if (ide_spin_wait_hwgroup(drive))
553                 goto out;
554         /*
555          * set ->busy flag, unlock and let it ride
556          */
557         hwif->hwgroup->busy = 1;
558         spin_unlock_irq(&ide_lock);
559
560         err = 0;
561
562         if (arg) {
563                 if (ide_set_dma(drive))
564                         err = -EIO;
565         } else
566                 ide_dma_off(drive);
567
568         /*
569          * lock, clear ->busy flag and unlock before leaving
570          */
571         spin_lock_irq(&ide_lock);
572         hwif->hwgroup->busy = 0;
573         spin_unlock_irq(&ide_lock);
574 out:
575         return err;
576 #else
577         if (arg < 0 || arg > 1)
578                 return -EINVAL;
579
580         return -EPERM;
581 #endif
582 }
583
584 int set_pio_mode(ide_drive_t *drive, int arg)
585 {
586         struct request rq;
587
588         if (arg < 0 || arg > 255)
589                 return -EINVAL;
590
591         if (drive->hwif->set_pio_mode == NULL)
592                 return -ENOSYS;
593
594         if (drive->special.b.set_tune)
595                 return -EBUSY;
596
597         ide_init_drive_cmd(&rq);
598         rq.cmd_type = REQ_TYPE_ATA_TASKFILE;
599
600         drive->tune_req = (u8) arg;
601         drive->special.b.set_tune = 1;
602         (void) ide_do_drive_cmd(drive, &rq, ide_wait);
603         return 0;
604 }
605
606 static int set_unmaskirq(ide_drive_t *drive, int arg)
607 {
608         if (drive->no_unmask)
609                 return -EPERM;
610
611         if (arg < 0 || arg > 1)
612                 return -EINVAL;
613
614         if (ide_spin_wait_hwgroup(drive))
615                 return -EBUSY;
616         drive->unmask = arg;
617         spin_unlock_irq(&ide_lock);
618
619         return 0;
620 }
621
622 /**
623  *      system_bus_clock        -       clock guess
624  *
625  *      External version of the bus clock guess used by very old IDE drivers
626  *      for things like VLB timings. Should not be used.
627  */
628
629 int system_bus_clock (void)
630 {
631         return system_bus_speed;
632 }
633
634 EXPORT_SYMBOL(system_bus_clock);
635
636 static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
637 {
638         ide_drive_t *drive = dev->driver_data;
639         ide_hwif_t *hwif = HWIF(drive);
640         struct request rq;
641         struct request_pm_state rqpm;
642         ide_task_t args;
643         int ret;
644
645         /* Call ACPI _GTM only once */
646         if (!(drive->dn % 2))
647                 ide_acpi_get_timing(hwif);
648
649         memset(&rq, 0, sizeof(rq));
650         memset(&rqpm, 0, sizeof(rqpm));
651         memset(&args, 0, sizeof(args));
652         rq.cmd_type = REQ_TYPE_PM_SUSPEND;
653         rq.special = &args;
654         rq.data = &rqpm;
655         rqpm.pm_step = ide_pm_state_start_suspend;
656         if (mesg.event == PM_EVENT_PRETHAW)
657                 mesg.event = PM_EVENT_FREEZE;
658         rqpm.pm_state = mesg.event;
659
660         ret = ide_do_drive_cmd(drive, &rq, ide_wait);
661         /* only call ACPI _PS3 after both drivers are suspended */
662         if (!ret && (((drive->dn % 2) && hwif->drives[0].present
663                  && hwif->drives[1].present)
664                  || !hwif->drives[0].present
665                  || !hwif->drives[1].present))
666                 ide_acpi_set_state(hwif, 0);
667         return ret;
668 }
669
670 static int generic_ide_resume(struct device *dev)
671 {
672         ide_drive_t *drive = dev->driver_data;
673         ide_hwif_t *hwif = HWIF(drive);
674         struct request rq;
675         struct request_pm_state rqpm;
676         ide_task_t args;
677         int err;
678
679         /* Call ACPI _STM only once */
680         if (!(drive->dn % 2)) {
681                 ide_acpi_set_state(hwif, 1);
682                 ide_acpi_push_timing(hwif);
683         }
684
685         ide_acpi_exec_tfs(drive);
686
687         memset(&rq, 0, sizeof(rq));
688         memset(&rqpm, 0, sizeof(rqpm));
689         memset(&args, 0, sizeof(args));
690         rq.cmd_type = REQ_TYPE_PM_RESUME;
691         rq.special = &args;
692         rq.data = &rqpm;
693         rqpm.pm_step = ide_pm_state_start_resume;
694         rqpm.pm_state = PM_EVENT_ON;
695
696         err = ide_do_drive_cmd(drive, &rq, ide_head_wait);
697
698         if (err == 0 && dev->driver) {
699                 ide_driver_t *drv = to_ide_driver(dev->driver);
700
701                 if (drv->resume)
702                         drv->resume(drive);
703         }
704
705         return err;
706 }
707
708 int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
709                         unsigned int cmd, unsigned long arg)
710 {
711         unsigned long flags;
712         ide_driver_t *drv;
713         void __user *p = (void __user *)arg;
714         int err = 0, (*setfunc)(ide_drive_t *, int);
715         u8 *val;
716
717         switch (cmd) {
718         case HDIO_GET_32BIT:        val = &drive->io_32bit;      goto read_val;
719         case HDIO_GET_KEEPSETTINGS: val = &drive->keep_settings; goto read_val;
720         case HDIO_GET_UNMASKINTR:   val = &drive->unmask;        goto read_val;
721         case HDIO_GET_DMA:          val = &drive->using_dma;     goto read_val;
722         case HDIO_SET_32BIT:        setfunc = set_io_32bit;      goto set_val;
723         case HDIO_SET_KEEPSETTINGS: setfunc = set_ksettings;     goto set_val;
724         case HDIO_SET_PIO_MODE:     setfunc = set_pio_mode;      goto set_val;
725         case HDIO_SET_UNMASKINTR:   setfunc = set_unmaskirq;     goto set_val;
726         case HDIO_SET_DMA:          setfunc = set_using_dma;     goto set_val;
727         }
728
729         switch (cmd) {
730                 case HDIO_OBSOLETE_IDENTITY:
731                 case HDIO_GET_IDENTITY:
732                         if (bdev != bdev->bd_contains)
733                                 return -EINVAL;
734                         if (drive->id_read == 0)
735                                 return -ENOMSG;
736                         if (copy_to_user(p, drive->id, (cmd == HDIO_GET_IDENTITY) ? sizeof(*drive->id) : 142))
737                                 return -EFAULT;
738                         return 0;
739
740                 case HDIO_GET_NICE:
741                         return put_user(drive->dsc_overlap      <<      IDE_NICE_DSC_OVERLAP    |
742                                         drive->atapi_overlap    <<      IDE_NICE_ATAPI_OVERLAP  |
743                                         drive->nice1 << IDE_NICE_1,
744                                         (long __user *) arg);
745 #ifdef CONFIG_IDE_TASK_IOCTL
746                 case HDIO_DRIVE_TASKFILE:
747                         if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
748                                 return -EACCES;
749                         switch(drive->media) {
750                                 case ide_disk:
751                                         return ide_taskfile_ioctl(drive, cmd, arg);
752                                 default:
753                                         return -ENOMSG;
754                         }
755 #endif /* CONFIG_IDE_TASK_IOCTL */
756
757                 case HDIO_DRIVE_CMD:
758                         if (!capable(CAP_SYS_RAWIO))
759                                 return -EACCES;
760                         return ide_cmd_ioctl(drive, cmd, arg);
761
762                 case HDIO_DRIVE_TASK:
763                         if (!capable(CAP_SYS_RAWIO))
764                                 return -EACCES;
765                         return ide_task_ioctl(drive, cmd, arg);
766                 case HDIO_SET_NICE:
767                         if (!capable(CAP_SYS_ADMIN)) return -EACCES;
768                         if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
769                                 return -EPERM;
770                         drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
771                         drv = *(ide_driver_t **)bdev->bd_disk->private_data;
772                         if (drive->dsc_overlap && !drv->supports_dsc_overlap) {
773                                 drive->dsc_overlap = 0;
774                                 return -EPERM;
775                         }
776                         drive->nice1 = (arg >> IDE_NICE_1) & 1;
777                         return 0;
778                 case HDIO_DRIVE_RESET:
779                         if (!capable(CAP_SYS_ADMIN))
780                                 return -EACCES;
781
782                         /*
783                          *      Abort the current command on the
784                          *      group if there is one, taking
785                          *      care not to allow anything else
786                          *      to be queued and to die on the
787                          *      spot if we miss one somehow
788                          */
789
790                         spin_lock_irqsave(&ide_lock, flags);
791
792                         if (HWGROUP(drive)->resetting) {
793                                 spin_unlock_irqrestore(&ide_lock, flags);
794                                 return -EBUSY;
795                         }
796
797                         ide_abort(drive, "drive reset");
798
799                         BUG_ON(HWGROUP(drive)->handler);
800
801                         /* Ensure nothing gets queued after we
802                            drop the lock. Reset will clear the busy */
803
804                         HWGROUP(drive)->busy = 1;
805                         spin_unlock_irqrestore(&ide_lock, flags);
806                         (void) ide_do_reset(drive);
807
808                         return 0;
809                 case HDIO_GET_BUSSTATE:
810                         if (!capable(CAP_SYS_ADMIN))
811                                 return -EACCES;
812                         if (put_user(HWIF(drive)->bus_state, (long __user *)arg))
813                                 return -EFAULT;
814                         return 0;
815
816                 case HDIO_SET_BUSSTATE:
817                         if (!capable(CAP_SYS_ADMIN))
818                                 return -EACCES;
819                         return -EOPNOTSUPP;
820                 default:
821                         return -EINVAL;
822         }
823
824 read_val:
825         mutex_lock(&ide_setting_mtx);
826         spin_lock_irqsave(&ide_lock, flags);
827         err = *val;
828         spin_unlock_irqrestore(&ide_lock, flags);
829         mutex_unlock(&ide_setting_mtx);
830         return err >= 0 ? put_user(err, (long __user *)arg) : err;
831
832 set_val:
833         if (bdev != bdev->bd_contains)
834                 err = -EINVAL;
835         else {
836                 if (!capable(CAP_SYS_ADMIN))
837                         err = -EACCES;
838                 else {
839                         mutex_lock(&ide_setting_mtx);
840                         err = setfunc(drive, arg);
841                         mutex_unlock(&ide_setting_mtx);
842                 }
843         }
844         return err;
845 }
846
847 EXPORT_SYMBOL(generic_ide_ioctl);
848
849 /*
850  * stridx() returns the offset of c within s,
851  * or -1 if c is '\0' or not found within s.
852  */
853 static int __init stridx (const char *s, char c)
854 {
855         char *i = strchr(s, c);
856         return (i && c) ? i - s : -1;
857 }
858
859 /*
860  * match_parm() does parsing for ide_setup():
861  *
862  * 1. the first char of s must be '='.
863  * 2. if the remainder matches one of the supplied keywords,
864  *     the index (1 based) of the keyword is negated and returned.
865  * 3. if the remainder is a series of no more than max_vals numbers
866  *     separated by commas, the numbers are saved in vals[] and a
867  *     count of how many were saved is returned.  Base10 is assumed,
868  *     and base16 is allowed when prefixed with "0x".
869  * 4. otherwise, zero is returned.
870  */
871 static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals)
872 {
873         static const char *decimal = "0123456789";
874         static const char *hex = "0123456789abcdef";
875         int i, n;
876
877         if (*s++ == '=') {
878                 /*
879                  * Try matching against the supplied keywords,
880                  * and return -(index+1) if we match one
881                  */
882                 if (keywords != NULL) {
883                         for (i = 0; *keywords != NULL; ++i) {
884                                 if (!strcmp(s, *keywords++))
885                                         return -(i+1);
886                         }
887                 }
888                 /*
889                  * Look for a series of no more than "max_vals"
890                  * numeric values separated by commas, in base10,
891                  * or base16 when prefixed with "0x".
892                  * Return a count of how many were found.
893                  */
894                 for (n = 0; (i = stridx(decimal, *s)) >= 0;) {
895                         vals[n] = i;
896                         while ((i = stridx(decimal, *++s)) >= 0)
897                                 vals[n] = (vals[n] * 10) + i;
898                         if (*s == 'x' && !vals[n]) {
899                                 while ((i = stridx(hex, *++s)) >= 0)
900                                         vals[n] = (vals[n] * 0x10) + i;
901                         }
902                         if (++n == max_vals)
903                                 break;
904                         if (*s == ',' || *s == ';')
905                                 ++s;
906                 }
907                 if (!*s)
908                         return n;
909         }
910         return 0;       /* zero = nothing matched */
911 }
912
913 extern int probe_ali14xx;
914 extern int probe_umc8672;
915 extern int probe_dtc2278;
916 extern int probe_ht6560b;
917 extern int probe_qd65xx;
918 extern int cmd640_vlb;
919 extern int probe_4drives;
920
921 static int __initdata is_chipset_set;
922
923 /*
924  * ide_setup() gets called VERY EARLY during initialization,
925  * to handle kernel "command line" strings beginning with "hdx=" or "ide".
926  *
927  * Remember to update Documentation/ide/ide.txt if you change something here.
928  */
929 static int __init ide_setup(char *s)
930 {
931         int i, vals[3];
932         ide_hwif_t *hwif;
933         ide_drive_t *drive;
934         unsigned int hw, unit;
935         const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1);
936         const char max_hwif  = '0' + (MAX_HWIFS - 1);
937
938         
939         if (strncmp(s,"hd",2) == 0 && s[2] == '=')      /* hd= is for hd.c   */
940                 return 0;                               /* driver and not us */
941
942         if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2))
943                 return 0;
944
945         printk(KERN_INFO "ide_setup: %s", s);
946         init_ide_data ();
947
948 #ifdef CONFIG_BLK_DEV_IDEDOUBLER
949         if (!strcmp(s, "ide=doubler")) {
950                 extern int ide_doubler;
951
952                 printk(" : Enabled support for IDE doublers\n");
953                 ide_doubler = 1;
954                 return 1;
955         }
956 #endif /* CONFIG_BLK_DEV_IDEDOUBLER */
957
958         if (!strcmp(s, "ide=nodma")) {
959                 printk(" : Prevented DMA\n");
960                 noautodma = 1;
961                 goto obsolete_option;
962         }
963
964 #ifdef CONFIG_BLK_DEV_IDEACPI
965         if (!strcmp(s, "ide=noacpi")) {
966                 //printk(" : Disable IDE ACPI support.\n");
967                 ide_noacpi = 1;
968                 return 1;
969         }
970         if (!strcmp(s, "ide=acpigtf")) {
971                 //printk(" : Enable IDE ACPI _GTF support.\n");
972                 ide_noacpitfs = 0;
973                 return 1;
974         }
975         if (!strcmp(s, "ide=acpionboot")) {
976                 //printk(" : Call IDE ACPI methods on boot.\n");
977                 ide_noacpionboot = 0;
978                 return 1;
979         }
980 #endif /* CONFIG_BLK_DEV_IDEACPI */
981
982         /*
983          * Look for drive options:  "hdx="
984          */
985         if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) {
986                 const char *hd_words[] = {
987                         "none", "noprobe", "nowerr", "cdrom", "nodma",
988                         "autotune", "noautotune", "-8", "-9", "-10",
989                         "noflush", "remap", "remap63", "scsi", NULL };
990                 unit = s[2] - 'a';
991                 hw   = unit / MAX_DRIVES;
992                 unit = unit % MAX_DRIVES;
993                 hwif = &ide_hwifs[hw];
994                 drive = &hwif->drives[unit];
995                 if (strncmp(s + 4, "ide-", 4) == 0) {
996                         strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req));
997                         goto obsolete_option;
998                 }
999                 switch (match_parm(&s[3], hd_words, vals, 3)) {
1000                         case -1: /* "none" */
1001                         case -2: /* "noprobe" */
1002                                 drive->noprobe = 1;
1003                                 goto done;
1004                         case -3: /* "nowerr" */
1005                                 drive->bad_wstat = BAD_R_STAT;
1006                                 hwif->noprobe = 0;
1007                                 goto done;
1008                         case -4: /* "cdrom" */
1009                                 drive->present = 1;
1010                                 drive->media = ide_cdrom;
1011                                 /* an ATAPI device ignores DRDY */
1012                                 drive->ready_stat = 0;
1013                                 hwif->noprobe = 0;
1014                                 goto done;
1015                         case -5: /* nodma */
1016                                 drive->nodma = 1;
1017                                 goto done;
1018                         case -6: /* "autotune" */
1019                                 drive->autotune = IDE_TUNE_AUTO;
1020                                 goto obsolete_option;
1021                         case -7: /* "noautotune" */
1022                                 drive->autotune = IDE_TUNE_NOAUTO;
1023                                 goto obsolete_option;
1024                         case -11: /* noflush */
1025                                 drive->noflush = 1;
1026                                 goto done;
1027                         case -12: /* "remap" */
1028                                 drive->remap_0_to_1 = 1;
1029                                 goto obsolete_option;
1030                         case -13: /* "remap63" */
1031                                 drive->sect0 = 63;
1032                                 goto obsolete_option;
1033                         case -14: /* "scsi" */
1034                                 drive->scsi = 1;
1035                                 goto obsolete_option;
1036                         case 3: /* cyl,head,sect */
1037                                 drive->media    = ide_disk;
1038                                 drive->ready_stat = READY_STAT;
1039                                 drive->cyl      = drive->bios_cyl  = vals[0];
1040                                 drive->head     = drive->bios_head = vals[1];
1041                                 drive->sect     = drive->bios_sect = vals[2];
1042                                 drive->present  = 1;
1043                                 drive->forced_geom = 1;
1044                                 hwif->noprobe = 0;
1045                                 goto done;
1046                         default:
1047                                 goto bad_option;
1048                 }
1049         }
1050
1051         if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e')
1052                 goto bad_option;
1053         /*
1054          * Look for bus speed option:  "idebus="
1055          */
1056         if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') {
1057                 if (match_parm(&s[6], NULL, vals, 1) != 1)
1058                         goto bad_option;
1059                 if (vals[0] >= 20 && vals[0] <= 66) {
1060                         idebus_parameter = vals[0];
1061                 } else
1062                         printk(" -- BAD BUS SPEED! Expected value from 20 to 66");
1063                 goto done;
1064         }
1065         /*
1066          * Look for interface options:  "idex="
1067          */
1068         if (s[3] >= '0' && s[3] <= max_hwif) {
1069                 /*
1070                  * Be VERY CAREFUL changing this: note hardcoded indexes below
1071                  * (-8, -9, -10) are reserved to ease the hardcoding.
1072                  */
1073                 static const char *ide_words[] = {
1074                         "minus1", "serialize", "minus3", "minus4",
1075                         "reset", "minus6", "ata66", "minus8", "minus9",
1076                         "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
1077                         "dtc2278", "umc8672", "ali14xx", NULL };
1078
1079                 hw = s[3] - '0';
1080                 hwif = &ide_hwifs[hw];
1081                 i = match_parm(&s[4], ide_words, vals, 3);
1082
1083                 /*
1084                  * Cryptic check to ensure chipset not already set for hwif.
1085                  * Note: we can't depend on hwif->chipset here.
1086                  */
1087                 if (i >= -18 && i <= -11) {
1088                         /* chipset already specified */
1089                         if (is_chipset_set)
1090                                 goto bad_option;
1091                         /* these drivers are for "ide0=" only */
1092                         if (hw != 0)
1093                                 goto bad_hwif;
1094                         is_chipset_set = 1;
1095                         printk("\n");
1096                 }
1097
1098                 switch (i) {
1099 #ifdef CONFIG_BLK_DEV_ALI14XX
1100                         case -17: /* "ali14xx" */
1101                                 probe_ali14xx = 1;
1102                                 goto obsolete_option;
1103 #endif
1104 #ifdef CONFIG_BLK_DEV_UMC8672
1105                         case -16: /* "umc8672" */
1106                                 probe_umc8672 = 1;
1107                                 goto obsolete_option;
1108 #endif
1109 #ifdef CONFIG_BLK_DEV_DTC2278
1110                         case -15: /* "dtc2278" */
1111                                 probe_dtc2278 = 1;
1112                                 goto obsolete_option;
1113 #endif
1114 #ifdef CONFIG_BLK_DEV_CMD640
1115                         case -14: /* "cmd640_vlb" */
1116                                 cmd640_vlb = 1;
1117                                 goto obsolete_option;
1118 #endif
1119 #ifdef CONFIG_BLK_DEV_HT6560B
1120                         case -13: /* "ht6560b" */
1121                                 probe_ht6560b = 1;
1122                                 goto obsolete_option;
1123 #endif
1124 #ifdef CONFIG_BLK_DEV_QD65XX
1125                         case -12: /* "qd65xx" */
1126                                 probe_qd65xx = 1;
1127                                 goto obsolete_option;
1128 #endif
1129 #ifdef CONFIG_BLK_DEV_4DRIVES
1130                         case -11: /* "four" drives on one set of ports */
1131                                 probe_4drives = 1;
1132                                 goto obsolete_option;
1133 #endif
1134                         case -10: /* minus10 */
1135                         case -9: /* minus9 */
1136                         case -8: /* minus8 */
1137                         case -6:
1138                         case -4:
1139                         case -3:
1140                                 goto bad_option;
1141                         case -7: /* ata66 */
1142 #ifdef CONFIG_BLK_DEV_IDEPCI
1143                                 /*
1144                                  * Use ATA_CBL_PATA40_SHORT so drive side
1145                                  * cable detection is also overriden.
1146                                  */
1147                                 hwif->cbl = ATA_CBL_PATA40_SHORT;
1148                                 goto obsolete_option;
1149 #else
1150                                 goto bad_hwif;
1151 #endif
1152                         case -5: /* "reset" */
1153                                 hwif->reset = 1;
1154                                 goto obsolete_option;
1155                         case -2: /* "serialize" */
1156                                 hwif->mate = &ide_hwifs[hw^1];
1157                                 hwif->mate->mate = hwif;
1158                                 hwif->serialized = hwif->mate->serialized = 1;
1159                                 goto obsolete_option;
1160
1161                         case -1:
1162                         case 0:
1163                         case 1:
1164                         case 2:
1165                         case 3:
1166                                 goto bad_option;
1167                         default:
1168                                 printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
1169                                 return 1;
1170                 }
1171         }
1172 bad_option:
1173         printk(" -- BAD OPTION\n");
1174         return 1;
1175 obsolete_option:
1176         printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n");
1177         return 1;
1178 bad_hwif:
1179         printk("-- NOT SUPPORTED ON ide%d", hw);
1180 done:
1181         printk("\n");
1182         return 1;
1183 }
1184
1185 EXPORT_SYMBOL(ide_lock);
1186
1187 static int ide_bus_match(struct device *dev, struct device_driver *drv)
1188 {
1189         return 1;
1190 }
1191
1192 static char *media_string(ide_drive_t *drive)
1193 {
1194         switch (drive->media) {
1195         case ide_disk:
1196                 return "disk";
1197         case ide_cdrom:
1198                 return "cdrom";
1199         case ide_tape:
1200                 return "tape";
1201         case ide_floppy:
1202                 return "floppy";
1203         case ide_optical:
1204                 return "optical";
1205         default:
1206                 return "UNKNOWN";
1207         }
1208 }
1209
1210 static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
1211 {
1212         ide_drive_t *drive = to_ide_device(dev);
1213         return sprintf(buf, "%s\n", media_string(drive));
1214 }
1215
1216 static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
1217 {
1218         ide_drive_t *drive = to_ide_device(dev);
1219         return sprintf(buf, "%s\n", drive->name);
1220 }
1221
1222 static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
1223 {
1224         ide_drive_t *drive = to_ide_device(dev);
1225         return sprintf(buf, "ide:m-%s\n", media_string(drive));
1226 }
1227
1228 static ssize_t model_show(struct device *dev, struct device_attribute *attr,
1229                           char *buf)
1230 {
1231         ide_drive_t *drive = to_ide_device(dev);
1232         return sprintf(buf, "%s\n", drive->id->model);
1233 }
1234
1235 static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
1236                              char *buf)
1237 {
1238         ide_drive_t *drive = to_ide_device(dev);
1239         return sprintf(buf, "%s\n", drive->id->fw_rev);
1240 }
1241
1242 static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
1243                            char *buf)
1244 {
1245         ide_drive_t *drive = to_ide_device(dev);
1246         return sprintf(buf, "%s\n", drive->id->serial_no);
1247 }
1248
1249 static struct device_attribute ide_dev_attrs[] = {
1250         __ATTR_RO(media),
1251         __ATTR_RO(drivename),
1252         __ATTR_RO(modalias),
1253         __ATTR_RO(model),
1254         __ATTR_RO(firmware),
1255         __ATTR(serial, 0400, serial_show, NULL),
1256         __ATTR_NULL
1257 };
1258
1259 static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
1260 {
1261         ide_drive_t *drive = to_ide_device(dev);
1262
1263         add_uevent_var(env, "MEDIA=%s", media_string(drive));
1264         add_uevent_var(env, "DRIVENAME=%s", drive->name);
1265         add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive));
1266         return 0;
1267 }
1268
1269 static int generic_ide_probe(struct device *dev)
1270 {
1271         ide_drive_t *drive = to_ide_device(dev);
1272         ide_driver_t *drv = to_ide_driver(dev->driver);
1273
1274         return drv->probe ? drv->probe(drive) : -ENODEV;
1275 }
1276
1277 static int generic_ide_remove(struct device *dev)
1278 {
1279         ide_drive_t *drive = to_ide_device(dev);
1280         ide_driver_t *drv = to_ide_driver(dev->driver);
1281
1282         if (drv->remove)
1283                 drv->remove(drive);
1284
1285         return 0;
1286 }
1287
1288 static void generic_ide_shutdown(struct device *dev)
1289 {
1290         ide_drive_t *drive = to_ide_device(dev);
1291         ide_driver_t *drv = to_ide_driver(dev->driver);
1292
1293         if (dev->driver && drv->shutdown)
1294                 drv->shutdown(drive);
1295 }
1296
1297 struct bus_type ide_bus_type = {
1298         .name           = "ide",
1299         .match          = ide_bus_match,
1300         .uevent         = ide_uevent,
1301         .probe          = generic_ide_probe,
1302         .remove         = generic_ide_remove,
1303         .shutdown       = generic_ide_shutdown,
1304         .dev_attrs      = ide_dev_attrs,
1305         .suspend        = generic_ide_suspend,
1306         .resume         = generic_ide_resume,
1307 };
1308
1309 EXPORT_SYMBOL_GPL(ide_bus_type);
1310
1311 static void ide_port_class_release(struct device *portdev)
1312 {
1313         ide_hwif_t *hwif = dev_get_drvdata(portdev);
1314
1315         put_device(&hwif->gendev);
1316 }
1317
1318 /*
1319  * This is gets invoked once during initialization, to set *everything* up
1320  */
1321 static int __init ide_init(void)
1322 {
1323         int ret;
1324
1325         printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
1326         system_bus_speed = ide_system_bus_speed();
1327
1328         printk(KERN_INFO "ide: Assuming %dMHz system bus speed "
1329                          "for PIO modes%s\n", system_bus_speed,
1330                         idebus_parameter ? "" : "; override with idebus=xx");
1331
1332         ret = bus_register(&ide_bus_type);
1333         if (ret < 0) {
1334                 printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
1335                 return ret;
1336         }
1337
1338         ide_port_class = class_create(THIS_MODULE, "ide_port");
1339         if (IS_ERR(ide_port_class)) {
1340                 ret = PTR_ERR(ide_port_class);
1341                 goto out_port_class;
1342         }
1343         ide_port_class->dev_release = ide_port_class_release;
1344
1345         init_ide_data();
1346
1347         proc_ide_create();
1348
1349         return 0;
1350
1351 out_port_class:
1352         bus_unregister(&ide_bus_type);
1353
1354         return ret;
1355 }
1356
1357 #ifdef MODULE
1358 static char *options = NULL;
1359 module_param(options, charp, 0);
1360 MODULE_LICENSE("GPL");
1361
1362 static void __init parse_options (char *line)
1363 {
1364         char *next = line;
1365
1366         if (line == NULL || !*line)
1367                 return;
1368         while ((line = next) != NULL) {
1369                 if ((next = strchr(line,' ')) != NULL)
1370                         *next++ = 0;
1371                 if (!ide_setup(line))
1372                         printk (KERN_INFO "Unknown option '%s'\n", line);
1373         }
1374 }
1375
1376 int __init init_module (void)
1377 {
1378         parse_options(options);
1379         return ide_init();
1380 }
1381
1382 void __exit cleanup_module (void)
1383 {
1384         int index;
1385
1386         for (index = 0; index < MAX_HWIFS; ++index)
1387                 ide_unregister(index);
1388
1389         proc_ide_destroy();
1390
1391         class_destroy(ide_port_class);
1392
1393         bus_unregister(&ide_bus_type);
1394 }
1395
1396 #else /* !MODULE */
1397
1398 __setup("", ide_setup);
1399
1400 module_init(ide_init);
1401
1402 #endif /* MODULE */