[PATCH] kfree cleanup: misc remaining drivers
[linux-3.10.git] / drivers / ide / ide-probe.c
1 /*
2  *  linux/drivers/ide/ide-probe.c       Version 1.11    Mar 05, 2003
3  *
4  *  Copyright (C) 1994-1998  Linus Torvalds & authors (see below)
5  */
6
7 /*
8  *  Mostly written by Mark Lord <mlord@pobox.com>
9  *                and Gadi Oxman <gadio@netvision.net.il>
10  *                and Andre Hedrick <andre@linux-ide.org>
11  *
12  *  See linux/MAINTAINERS for address of current maintainer.
13  *
14  * This is the IDE probe module, as evolved from hd.c and ide.c.
15  *
16  * Version 1.00         move drive probing code from ide.c to ide-probe.c
17  * Version 1.01         fix compilation problem for m68k
18  * Version 1.02         increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot
19  *                       by Andrea Arcangeli
20  * Version 1.03         fix for (hwif->chipset == ide_4drives)
21  * Version 1.04         fixed buggy treatments of known flash memory cards
22  *
23  * Version 1.05         fix for (hwif->chipset == ide_pdc4030)
24  *                      added ide6/7/8/9
25  *                      allowed for secondary flash card to be detectable
26  *                       with new flag : drive->ata_flash : 1;
27  * Version 1.06         stream line request queue and prep for cascade project.
28  * Version 1.07         max_sect <= 255; slower disks would get behind and
29  *                      then fall over when they get to 256.    Paul G.
30  * Version 1.10         Update set for new IDE. drive->id is now always
31  *                      valid after probe time even with noprobe
32  */
33
34 #undef REALLY_SLOW_IO           /* most systems can safely undef this */
35
36 #include <linux/config.h>
37 #include <linux/module.h>
38 #include <linux/types.h>
39 #include <linux/string.h>
40 #include <linux/kernel.h>
41 #include <linux/timer.h>
42 #include <linux/mm.h>
43 #include <linux/interrupt.h>
44 #include <linux/major.h>
45 #include <linux/errno.h>
46 #include <linux/genhd.h>
47 #include <linux/slab.h>
48 #include <linux/delay.h>
49 #include <linux/ide.h>
50 #include <linux/devfs_fs_kernel.h>
51 #include <linux/spinlock.h>
52 #include <linux/kmod.h>
53 #include <linux/pci.h>
54
55 #include <asm/byteorder.h>
56 #include <asm/irq.h>
57 #include <asm/uaccess.h>
58 #include <asm/io.h>
59
60 /**
61  *      generic_id              -       add a generic drive id
62  *      @drive: drive to make an ID block for
63  *      
64  *      Add a fake id field to the drive we are passed. This allows
65  *      use to skip a ton of NULL checks (which people always miss) 
66  *      and make drive properties unconditional outside of this file
67  */
68  
69 static void generic_id(ide_drive_t *drive)
70 {
71         drive->id->cyls = drive->cyl;
72         drive->id->heads = drive->head;
73         drive->id->sectors = drive->sect;
74         drive->id->cur_cyls = drive->cyl;
75         drive->id->cur_heads = drive->head;
76         drive->id->cur_sectors = drive->sect;
77 }
78
79 static void ide_disk_init_chs(ide_drive_t *drive)
80 {
81         struct hd_driveid *id = drive->id;
82
83         /* Extract geometry if we did not already have one for the drive */
84         if (!drive->cyl || !drive->head || !drive->sect) {
85                 drive->cyl  = drive->bios_cyl  = id->cyls;
86                 drive->head = drive->bios_head = id->heads;
87                 drive->sect = drive->bios_sect = id->sectors;
88         }
89
90         /* Handle logical geometry translation by the drive */
91         if ((id->field_valid & 1) && id->cur_cyls &&
92             id->cur_heads && (id->cur_heads <= 16) && id->cur_sectors) {
93                 drive->cyl  = id->cur_cyls;
94                 drive->head = id->cur_heads;
95                 drive->sect = id->cur_sectors;
96         }
97
98         /* Use physical geometry if what we have still makes no sense */
99         if (drive->head > 16 && id->heads && id->heads <= 16) {
100                 drive->cyl  = id->cyls;
101                 drive->head = id->heads;
102                 drive->sect = id->sectors;
103         }
104 }
105
106 static void ide_disk_init_mult_count(ide_drive_t *drive)
107 {
108         struct hd_driveid *id = drive->id;
109
110         drive->mult_count = 0;
111         if (id->max_multsect) {
112 #ifdef CONFIG_IDEDISK_MULTI_MODE
113                 id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0;
114                 id->multsect_valid = id->multsect ? 1 : 0;
115                 drive->mult_req = id->multsect_valid ? id->max_multsect : INITIAL_MULT_COUNT;
116                 drive->special.b.set_multmode = drive->mult_req ? 1 : 0;
117 #else   /* original, pre IDE-NFG, per request of AC */
118                 drive->mult_req = INITIAL_MULT_COUNT;
119                 if (drive->mult_req > id->max_multsect)
120                         drive->mult_req = id->max_multsect;
121                 if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect))
122                         drive->special.b.set_multmode = 1;
123 #endif
124         }
125 }
126
127 /**
128  *      drive_is_flashcard      -       check for compact flash
129  *      @drive: drive to check
130  *
131  *      CompactFlash cards and their brethern pretend to be removable
132  *      hard disks, except:
133  *              (1) they never have a slave unit, and
134  *              (2) they don't have doorlock mechanisms.
135  *      This test catches them, and is invoked elsewhere when setting
136  *      appropriate config bits.
137  *
138  *      FIXME: This treatment is probably applicable for *all* PCMCIA (PC CARD)
139  *      devices, so in linux 2.3.x we should change this to just treat all
140  *      PCMCIA  drives this way, and get rid of the model-name tests below
141  *      (too big of an interface change for 2.4.x).
142  *      At that time, we might also consider parameterizing the timeouts and
143  *      retries, since these are MUCH faster than mechanical drives. -M.Lord
144  */
145  
146 static inline int drive_is_flashcard (ide_drive_t *drive)
147 {
148         struct hd_driveid *id = drive->id;
149
150         if (drive->removable) {
151                 if (id->config == 0x848a) return 1;     /* CompactFlash */
152                 if (!strncmp(id->model, "KODAK ATA_FLASH", 15)  /* Kodak */
153                  || !strncmp(id->model, "Hitachi CV", 10)       /* Hitachi */
154                  || !strncmp(id->model, "SunDisk SDCFB", 13)    /* old SanDisk */
155                  || !strncmp(id->model, "SanDisk SDCFB", 13)    /* SanDisk */
156                  || !strncmp(id->model, "HAGIWARA HPC", 12)     /* Hagiwara */
157                  || !strncmp(id->model, "LEXAR ATA_FLASH", 15)  /* Lexar */
158                  || !strncmp(id->model, "ATA_FLASH", 9))        /* Simple Tech */
159                 {
160                         return 1;       /* yes, it is a flash memory card */
161                 }
162         }
163         return 0;       /* no, it is not a flash memory card */
164 }
165
166 /**
167  *      do_identify     -       identify a drive
168  *      @drive: drive to identify 
169  *      @cmd: command used
170  *
171  *      Called when we have issued a drive identify command to
172  *      read and parse the results. This function is run with
173  *      interrupts disabled. 
174  */
175  
176 static inline void do_identify (ide_drive_t *drive, u8 cmd)
177 {
178         ide_hwif_t *hwif = HWIF(drive);
179         int bswap = 1;
180         struct hd_driveid *id;
181
182         id = drive->id;
183         /* read 512 bytes of id info */
184         hwif->ata_input_data(drive, id, SECTOR_WORDS);
185
186         drive->id_read = 1;
187         local_irq_enable();
188         ide_fix_driveid(id);
189
190 #if defined (CONFIG_SCSI_EATA_DMA) || defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
191         /*
192          * EATA SCSI controllers do a hardware ATA emulation:
193          * Ignore them if there is a driver for them available.
194          */
195         if ((id->model[0] == 'P' && id->model[1] == 'M') ||
196             (id->model[0] == 'S' && id->model[1] == 'K')) {
197                 printk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model);
198                 goto err_misc;
199         }
200 #endif /* CONFIG_SCSI_EATA_DMA || CONFIG_SCSI_EATA_PIO */
201
202         /*
203          *  WIN_IDENTIFY returns little-endian info,
204          *  WIN_PIDENTIFY *usually* returns little-endian info.
205          */
206         if (cmd == WIN_PIDENTIFY) {
207                 if ((id->model[0] == 'N' && id->model[1] == 'E') /* NEC */
208                  || (id->model[0] == 'F' && id->model[1] == 'X') /* Mitsumi */
209                  || (id->model[0] == 'P' && id->model[1] == 'i'))/* Pioneer */
210                         /* Vertos drives may still be weird */
211                         bswap ^= 1;     
212         }
213         ide_fixstring(id->model,     sizeof(id->model),     bswap);
214         ide_fixstring(id->fw_rev,    sizeof(id->fw_rev),    bswap);
215         ide_fixstring(id->serial_no, sizeof(id->serial_no), bswap);
216
217         if (strstr(id->model, "E X A B Y T E N E S T"))
218                 goto err_misc;
219
220         /* we depend on this a lot! */
221         id->model[sizeof(id->model)-1] = '\0';
222         printk("%s: %s, ", drive->name, id->model);
223         drive->present = 1;
224         drive->dead = 0;
225
226         /*
227          * Check for an ATAPI device
228          */
229         if (cmd == WIN_PIDENTIFY) {
230                 u8 type = (id->config >> 8) & 0x1f;
231                 printk("ATAPI ");
232                 switch (type) {
233                         case ide_floppy:
234                                 if (!strstr(id->model, "CD-ROM")) {
235                                         if (!strstr(id->model, "oppy") &&
236                                             !strstr(id->model, "poyp") &&
237                                             !strstr(id->model, "ZIP"))
238                                                 printk("cdrom or floppy?, assuming ");
239                                         if (drive->media != ide_cdrom) {
240                                                 printk ("FLOPPY");
241                                                 drive->removable = 1;
242                                                 break;
243                                         }
244                                 }
245                                 /* Early cdrom models used zero */
246                                 type = ide_cdrom;
247                         case ide_cdrom:
248                                 drive->removable = 1;
249 #ifdef CONFIG_PPC
250                                 /* kludge for Apple PowerBook internal zip */
251                                 if (!strstr(id->model, "CD-ROM") &&
252                                     strstr(id->model, "ZIP")) {
253                                         printk ("FLOPPY");
254                                         type = ide_floppy;
255                                         break;
256                                 }
257 #endif
258                                 printk ("CD/DVD-ROM");
259                                 break;
260                         case ide_tape:
261                                 printk ("TAPE");
262                                 break;
263                         case ide_optical:
264                                 printk ("OPTICAL");
265                                 drive->removable = 1;
266                                 break;
267                         default:
268                                 printk("UNKNOWN (type %d)", type);
269                                 break;
270                 }
271                 printk (" drive\n");
272                 drive->media = type;
273                 /* an ATAPI device ignores DRDY */
274                 drive->ready_stat = 0;
275                 return;
276         }
277
278         /*
279          * Not an ATAPI device: looks like a "regular" hard disk
280          */
281         if (id->config & (1<<7))
282                 drive->removable = 1;
283
284         if (drive_is_flashcard(drive))
285                 drive->is_flash = 1;
286         drive->media = ide_disk;
287         printk("%s DISK drive\n", (drive->is_flash) ? "CFA" : "ATA" );
288         QUIRK_LIST(drive);
289         return;
290
291 err_misc:
292         kfree(id);
293         drive->present = 0;
294         return;
295 }
296
297 /**
298  *      actual_try_to_identify  -       send ata/atapi identify
299  *      @drive: drive to identify
300  *      @cmd: command to use
301  *
302  *      try_to_identify() sends an ATA(PI) IDENTIFY request to a drive
303  *      and waits for a response.  It also monitors irqs while this is
304  *      happening, in hope of automatically determining which one is
305  *      being used by the interface.
306  *
307  *      Returns:        0  device was identified
308  *                      1  device timed-out (no response to identify request)
309  *                      2  device aborted the command (refused to identify itself)
310  */
311
312 static int actual_try_to_identify (ide_drive_t *drive, u8 cmd)
313 {
314         ide_hwif_t *hwif = HWIF(drive);
315         int rc;
316         unsigned long hd_status;
317         unsigned long timeout;
318         u8 s = 0, a = 0;
319
320         /* take a deep breath */
321         msleep(50);
322
323         if (IDE_CONTROL_REG) {
324                 a = hwif->INB(IDE_ALTSTATUS_REG);
325                 s = hwif->INB(IDE_STATUS_REG);
326                 if ((a ^ s) & ~INDEX_STAT) {
327                         printk(KERN_INFO "%s: probing with STATUS(0x%02x) instead of "
328                                 "ALTSTATUS(0x%02x)\n", drive->name, s, a);
329                         /* ancient Seagate drives, broken interfaces */
330                         hd_status = IDE_STATUS_REG;
331                 } else {
332                         /* use non-intrusive polling */
333                         hd_status = IDE_ALTSTATUS_REG;
334                 }
335         } else
336                 hd_status = IDE_STATUS_REG;
337
338         /* set features register for atapi
339          * identify command to be sure of reply
340          */
341         if ((cmd == WIN_PIDENTIFY))
342                 /* disable dma & overlap */
343                 hwif->OUTB(0, IDE_FEATURE_REG);
344
345         /* ask drive for ID */
346         hwif->OUTB(cmd, IDE_COMMAND_REG);
347
348         timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
349         timeout += jiffies;
350         do {
351                 if (time_after(jiffies, timeout)) {
352                         /* drive timed-out */
353                         return 1;
354                 }
355                 /* give drive a breather */
356                 msleep(50);
357         } while ((hwif->INB(hd_status)) & BUSY_STAT);
358
359         /* wait for IRQ and DRQ_STAT */
360         msleep(50);
361         if (OK_STAT((hwif->INB(IDE_STATUS_REG)), DRQ_STAT, BAD_R_STAT)) {
362                 unsigned long flags;
363
364                 /* local CPU only; some systems need this */
365                 local_irq_save(flags);
366                 /* drive returned ID */
367                 do_identify(drive, cmd);
368                 /* drive responded with ID */
369                 rc = 0;
370                 /* clear drive IRQ */
371                 (void) hwif->INB(IDE_STATUS_REG);
372                 local_irq_restore(flags);
373         } else {
374                 /* drive refused ID */
375                 rc = 2;
376         }
377         return rc;
378 }
379
380 /**
381  *      try_to_identify -       try to identify a drive
382  *      @drive: drive to probe
383  *      @cmd: command to use
384  *
385  *      Issue the identify command and then do IRQ probing to
386  *      complete the identification when needed by finding the
387  *      IRQ the drive is attached to
388  */
389  
390 static int try_to_identify (ide_drive_t *drive, u8 cmd)
391 {
392         ide_hwif_t *hwif = HWIF(drive);
393         int retval;
394         int autoprobe = 0;
395         unsigned long cookie = 0;
396
397         /*
398          * Disable device irq unless we need to
399          * probe for it. Otherwise we'll get spurious
400          * interrupts during the identify-phase that
401          * the irq handler isn't expecting.
402          */
403         if (IDE_CONTROL_REG) {
404                 u8 ctl = drive->ctl | 2;
405                 if (!hwif->irq) {
406                         autoprobe = 1;
407                         cookie = probe_irq_on();
408                         /* enable device irq */
409                         ctl &= ~2;
410                 }
411                 hwif->OUTB(ctl, IDE_CONTROL_REG);
412         }
413
414         retval = actual_try_to_identify(drive, cmd);
415
416         if (autoprobe) {
417                 int irq;
418                 /* mask device irq */
419                 hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG);
420                 /* clear drive IRQ */
421                 (void) hwif->INB(IDE_STATUS_REG);
422                 udelay(5);
423                 irq = probe_irq_off(cookie);
424                 if (!hwif->irq) {
425                         if (irq > 0) {
426                                 hwif->irq = irq;
427                         } else {
428                                 /* Mmmm.. multiple IRQs..
429                                  * don't know which was ours
430                                  */
431                                 printk("%s: IRQ probe failed (0x%lx)\n",
432                                         drive->name, cookie);
433                         }
434                 }
435         }
436         return retval;
437 }
438
439
440 /**
441  *      do_probe                -       probe an IDE device
442  *      @drive: drive to probe
443  *      @cmd: command to use
444  *
445  *      do_probe() has the difficult job of finding a drive if it exists,
446  *      without getting hung up if it doesn't exist, without trampling on
447  *      ethernet cards, and without leaving any IRQs dangling to haunt us later.
448  *
449  *      If a drive is "known" to exist (from CMOS or kernel parameters),
450  *      but does not respond right away, the probe will "hang in there"
451  *      for the maximum wait time (about 30 seconds), otherwise it will
452  *      exit much more quickly.
453  *
454  * Returns:     0  device was identified
455  *              1  device timed-out (no response to identify request)
456  *              2  device aborted the command (refused to identify itself)
457  *              3  bad status from device (possible for ATAPI drives)
458  *              4  probe was not attempted because failure was obvious
459  */
460
461 static int do_probe (ide_drive_t *drive, u8 cmd)
462 {
463         int rc;
464         ide_hwif_t *hwif = HWIF(drive);
465
466         if (drive->present) {
467                 /* avoid waiting for inappropriate probes */
468                 if ((drive->media != ide_disk) && (cmd == WIN_IDENTIFY))
469                         return 4;
470         }
471 #ifdef DEBUG
472         printk("probing for %s: present=%d, media=%d, probetype=%s\n",
473                 drive->name, drive->present, drive->media,
474                 (cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI");
475 #endif
476
477         /* needed for some systems
478          * (e.g. crw9624 as drive0 with disk as slave)
479          */
480         msleep(50);
481         SELECT_DRIVE(drive);
482         msleep(50);
483         if (hwif->INB(IDE_SELECT_REG) != drive->select.all && !drive->present) {
484                 if (drive->select.b.unit != 0) {
485                         /* exit with drive0 selected */
486                         SELECT_DRIVE(&hwif->drives[0]);
487                         /* allow BUSY_STAT to assert & clear */
488                         msleep(50);
489                 }
490                 /* no i/f present: mmm.. this should be a 4 -ml */
491                 return 3;
492         }
493
494         if (OK_STAT((hwif->INB(IDE_STATUS_REG)), READY_STAT, BUSY_STAT) ||
495             drive->present || cmd == WIN_PIDENTIFY) {
496                 /* send cmd and wait */
497                 if ((rc = try_to_identify(drive, cmd))) {
498                         /* failed: try again */
499                         rc = try_to_identify(drive,cmd);
500                 }
501                 if (hwif->INB(IDE_STATUS_REG) == (BUSY_STAT|READY_STAT))
502                         return 4;
503
504                 if ((rc == 1 && cmd == WIN_PIDENTIFY) &&
505                         ((drive->autotune == IDE_TUNE_DEFAULT) ||
506                         (drive->autotune == IDE_TUNE_AUTO))) {
507                         unsigned long timeout;
508                         printk("%s: no response (status = 0x%02x), "
509                                 "resetting drive\n", drive->name,
510                                 hwif->INB(IDE_STATUS_REG));
511                         msleep(50);
512                         hwif->OUTB(drive->select.all, IDE_SELECT_REG);
513                         msleep(50);
514                         hwif->OUTB(WIN_SRST, IDE_COMMAND_REG);
515                         timeout = jiffies;
516                         while (((hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) &&
517                                time_before(jiffies, timeout + WAIT_WORSTCASE))
518                                 msleep(50);
519                         rc = try_to_identify(drive, cmd);
520                 }
521                 if (rc == 1)
522                         printk("%s: no response (status = 0x%02x)\n",
523                                 drive->name, hwif->INB(IDE_STATUS_REG));
524                 /* ensure drive irq is clear */
525                 (void) hwif->INB(IDE_STATUS_REG);
526         } else {
527                 /* not present or maybe ATAPI */
528                 rc = 3;
529         }
530         if (drive->select.b.unit != 0) {
531                 /* exit with drive0 selected */
532                 SELECT_DRIVE(&hwif->drives[0]);
533                 msleep(50);
534                 /* ensure drive irq is clear */
535                 (void) hwif->INB(IDE_STATUS_REG);
536         }
537         return rc;
538 }
539
540 /*
541  *
542  */
543 static void enable_nest (ide_drive_t *drive)
544 {
545         ide_hwif_t *hwif = HWIF(drive);
546         unsigned long timeout;
547
548         printk("%s: enabling %s -- ", hwif->name, drive->id->model);
549         SELECT_DRIVE(drive);
550         msleep(50);
551         hwif->OUTB(EXABYTE_ENABLE_NEST, IDE_COMMAND_REG);
552         timeout = jiffies + WAIT_WORSTCASE;
553         do {
554                 if (time_after(jiffies, timeout)) {
555                         printk("failed (timeout)\n");
556                         return;
557                 }
558                 msleep(50);
559         } while ((hwif->INB(IDE_STATUS_REG)) & BUSY_STAT);
560
561         msleep(50);
562
563         if (!OK_STAT((hwif->INB(IDE_STATUS_REG)), 0, BAD_STAT)) {
564                 printk("failed (status = 0x%02x)\n", hwif->INB(IDE_STATUS_REG));
565         } else {
566                 printk("success\n");
567         }
568
569         /* if !(success||timed-out) */
570         if (do_probe(drive, WIN_IDENTIFY) >= 2) {
571                 /* look for ATAPI device */
572                 (void) do_probe(drive, WIN_PIDENTIFY);
573         }
574 }
575
576 /**
577  *      probe_for_drives        -       upper level drive probe
578  *      @drive: drive to probe for
579  *
580  *      probe_for_drive() tests for existence of a given drive using do_probe()
581  *      and presents things to the user as needed.
582  *
583  *      Returns:        0  no device was found
584  *                      1  device was found (note: drive->present might
585  *                         still be 0)
586  */
587  
588 static inline u8 probe_for_drive (ide_drive_t *drive)
589 {
590         /*
591          *      In order to keep things simple we have an id
592          *      block for all drives at all times. If the device
593          *      is pre ATA or refuses ATA/ATAPI identify we
594          *      will add faked data to this.
595          *
596          *      Also note that 0 everywhere means "can't do X"
597          */
598  
599         drive->id = kzalloc(SECTOR_WORDS *4, GFP_KERNEL);
600         drive->id_read = 0;
601         if(drive->id == NULL)
602         {
603                 printk(KERN_ERR "ide: out of memory for id data.\n");
604                 return 0;
605         }
606         strcpy(drive->id->model, "UNKNOWN");
607         
608         /* skip probing? */
609         if (!drive->noprobe)
610         {
611                 /* if !(success||timed-out) */
612                 if (do_probe(drive, WIN_IDENTIFY) >= 2) {
613                         /* look for ATAPI device */
614                         (void) do_probe(drive, WIN_PIDENTIFY);
615                 }
616                 if (strstr(drive->id->model, "E X A B Y T E N E S T"))
617                         enable_nest(drive);
618                 if (!drive->present)
619                         /* drive not found */
620                         return 0;
621         
622                 /* identification failed? */
623                 if (!drive->id_read) {
624                         if (drive->media == ide_disk) {
625                                 printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n",
626                                         drive->name, drive->cyl,
627                                         drive->head, drive->sect);
628                         } else if (drive->media == ide_cdrom) {
629                                 printk(KERN_INFO "%s: ATAPI cdrom (?)\n", drive->name);
630                         } else {
631                                 /* nuke it */
632                                 printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name);
633                                 drive->present = 0;
634                         }
635                 }
636                 /* drive was found */
637         }
638         if(!drive->present)
639                 return 0;
640         /* The drive wasn't being helpful. Add generic info only */
641         if (drive->id_read == 0) {
642                 generic_id(drive);
643                 return 1;
644         }
645
646         if (drive->media == ide_disk) {
647                 ide_disk_init_chs(drive);
648                 ide_disk_init_mult_count(drive);
649         }
650
651         return drive->present;
652 }
653
654 static void hwif_release_dev (struct device *dev)
655 {
656         ide_hwif_t *hwif = container_of(dev, ide_hwif_t, gendev);
657
658         up(&hwif->gendev_rel_sem);
659 }
660
661 static void hwif_register (ide_hwif_t *hwif)
662 {
663         /* register with global device tree */
664         strlcpy(hwif->gendev.bus_id,hwif->name,BUS_ID_SIZE);
665         hwif->gendev.driver_data = hwif;
666         if (hwif->gendev.parent == NULL) {
667                 if (hwif->pci_dev)
668                         hwif->gendev.parent = &hwif->pci_dev->dev;
669                 else
670                         /* Would like to do = &device_legacy */
671                         hwif->gendev.parent = NULL;
672         }
673         hwif->gendev.release = hwif_release_dev;
674         device_register(&hwif->gendev);
675 }
676
677 static int wait_hwif_ready(ide_hwif_t *hwif)
678 {
679         int rc;
680
681         printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name);
682
683         /* Let HW settle down a bit from whatever init state we
684          * come from */
685         mdelay(2);
686
687         /* Wait for BSY bit to go away, spec timeout is 30 seconds,
688          * I know of at least one disk who takes 31 seconds, I use 35
689          * here to be safe
690          */
691         rc = ide_wait_not_busy(hwif, 35000);
692         if (rc)
693                 return rc;
694
695         /* Now make sure both master & slave are ready */
696         SELECT_DRIVE(&hwif->drives[0]);
697         hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
698         mdelay(2);
699         rc = ide_wait_not_busy(hwif, 35000);
700         if (rc)
701                 return rc;
702         SELECT_DRIVE(&hwif->drives[1]);
703         hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
704         mdelay(2);
705         rc = ide_wait_not_busy(hwif, 35000);
706
707         /* Exit function with master reselected (let's be sane) */
708         SELECT_DRIVE(&hwif->drives[0]);
709         
710         return rc;
711 }
712
713 /**
714  *      ide_undecoded_slave     -       look for bad CF adapters
715  *      @hwif: interface
716  *
717  *      Analyse the drives on the interface and attempt to decide if we
718  *      have the same drive viewed twice. This occurs with crap CF adapters
719  *      and PCMCIA sometimes.
720  */
721
722 void ide_undecoded_slave(ide_hwif_t *hwif)
723 {
724         ide_drive_t *drive0 = &hwif->drives[0];
725         ide_drive_t *drive1 = &hwif->drives[1];
726
727         if (drive0->present == 0 || drive1->present == 0)
728                 return;
729
730         /* If the models don't match they are not the same product */
731         if (strcmp(drive0->id->model, drive1->id->model))
732                 return;
733
734         /* Serial numbers do not match */
735         if (strncmp(drive0->id->serial_no, drive1->id->serial_no, 20))
736                 return;
737
738         /* No serial number, thankfully very rare for CF */
739         if (drive0->id->serial_no[0] == 0)
740                 return;
741
742         /* Appears to be an IDE flash adapter with decode bugs */
743         printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n");
744
745         drive1->present = 0;
746 }
747
748 EXPORT_SYMBOL_GPL(ide_undecoded_slave);
749
750 /*
751  * This routine only knows how to look for drive units 0 and 1
752  * on an interface, so any setting of MAX_DRIVES > 2 won't work here.
753  */
754 static void probe_hwif(ide_hwif_t *hwif)
755 {
756         unsigned int unit;
757         unsigned long flags;
758         unsigned int irqd;
759
760         if (hwif->noprobe)
761                 return;
762
763         if ((hwif->chipset != ide_4drives || !hwif->mate || !hwif->mate->present) &&
764             (ide_hwif_request_regions(hwif))) {
765                 u16 msgout = 0;
766                 for (unit = 0; unit < MAX_DRIVES; ++unit) {
767                         ide_drive_t *drive = &hwif->drives[unit];
768                         if (drive->present) {
769                                 drive->present = 0;
770                                 printk(KERN_ERR "%s: ERROR, PORTS ALREADY IN USE\n",
771                                         drive->name);
772                                 msgout = 1;
773                         }
774                 }
775                 if (!msgout)
776                         printk(KERN_ERR "%s: ports already in use, skipping probe\n",
777                                 hwif->name);
778                 return; 
779         }
780
781         /*
782          * We must always disable IRQ, as probe_for_drive will assert IRQ, but
783          * we'll install our IRQ driver much later...
784          */
785         irqd = hwif->irq;
786         if (irqd)
787                 disable_irq(hwif->irq);
788
789         local_irq_set(flags);
790
791         /* This is needed on some PPCs and a bunch of BIOS-less embedded
792          * platforms. Typical cases are:
793          * 
794          *  - The firmware hard reset the disk before booting the kernel,
795          *    the drive is still doing it's poweron-reset sequence, that
796          *    can take up to 30 seconds
797          *  - The firmware does nothing (or no firmware), the device is
798          *    still in POST state (same as above actually).
799          *  - Some CD/DVD/Writer combo drives tend to drive the bus during
800          *    their reset sequence even when they are non-selected slave
801          *    devices, thus preventing discovery of the main HD
802          *    
803          *  Doing this wait-for-busy should not harm any existing configuration
804          *  (at least things won't be worse than what current code does, that
805          *  is blindly go & talk to the drive) and fix some issues like the
806          *  above.
807          *  
808          *  BenH.
809          */
810         if (wait_hwif_ready(hwif) == -EBUSY)
811                 printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
812
813         /*
814          * Second drive should only exist if first drive was found,
815          * but a lot of cdrom drives are configured as single slaves.
816          */
817         for (unit = 0; unit < MAX_DRIVES; ++unit) {
818                 ide_drive_t *drive = &hwif->drives[unit];
819                 drive->dn = (hwif->channel ? 2 : 0) + unit;
820                 (void) probe_for_drive(drive);
821                 if (drive->present && !hwif->present) {
822                         hwif->present = 1;
823                         if (hwif->chipset != ide_4drives ||
824                             !hwif->mate || 
825                             !hwif->mate->present) {
826                                 hwif_register(hwif);
827                         }
828                 }
829         }
830         if (hwif->io_ports[IDE_CONTROL_OFFSET] && hwif->reset) {
831                 unsigned long timeout = jiffies + WAIT_WORSTCASE;
832                 u8 stat;
833
834                 printk(KERN_WARNING "%s: reset\n", hwif->name);
835                 hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
836                 udelay(10);
837                 hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
838                 do {
839                         msleep(50);
840                         stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
841                 } while ((stat & BUSY_STAT) && time_after(timeout, jiffies));
842
843         }
844         local_irq_restore(flags);
845         /*
846          * Use cached IRQ number. It might be (and is...) changed by probe
847          * code above
848          */
849         if (irqd)
850                 enable_irq(irqd);
851
852         if (!hwif->present) {
853                 ide_hwif_release_regions(hwif);
854                 return;
855         }
856
857         for (unit = 0; unit < MAX_DRIVES; ++unit) {
858                 ide_drive_t *drive = &hwif->drives[unit];
859
860                 if (drive->present) {
861                         if (hwif->tuneproc != NULL && 
862                                 drive->autotune == IDE_TUNE_AUTO)
863                                 /* auto-tune PIO mode */
864                                 hwif->tuneproc(drive, 255);
865
866                         if (drive->autotune != IDE_TUNE_DEFAULT &&
867                             drive->autotune != IDE_TUNE_AUTO)
868                                 continue;
869
870                         drive->nice1 = 1;
871
872                         /*
873                          * MAJOR HACK BARF :-/
874                          *
875                          * FIXME: chipsets own this cruft!
876                          */
877                         /*
878                          * Move here to prevent module loading clashing.
879                          */
880         //              drive->autodma = hwif->autodma;
881                         if (hwif->ide_dma_check) {
882                                 /*
883                                  * Force DMAing for the beginning of the check.
884                                  * Some chipsets appear to do interesting
885                                  * things, if not checked and cleared.
886                                  *   PARANOIA!!!
887                                  */
888                                 hwif->ide_dma_off_quietly(drive);
889 #ifdef CONFIG_IDEDMA_ONLYDISK
890                                 if (drive->media == ide_disk)
891 #endif
892                                         hwif->ide_dma_check(drive);
893                         }
894                 }
895         }
896 }
897
898 static int hwif_init(ide_hwif_t *hwif);
899
900 int probe_hwif_init_with_fixup(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
901 {
902         probe_hwif(hwif);
903
904         if (fixup)
905                 fixup(hwif);
906
907         if (!hwif_init(hwif)) {
908                 printk(KERN_INFO "%s: failed to initialize IDE interface\n",
909                                  hwif->name);
910                 return -1;
911         }
912
913         if (hwif->present) {
914                 u16 unit = 0;
915                 for (unit = 0; unit < MAX_DRIVES; ++unit) {
916                         ide_drive_t *drive = &hwif->drives[unit];
917                         /* For now don't attach absent drives, we may
918                            want them on default or a new "empty" class
919                            for hotplug reprobing ? */
920                         if (drive->present) {
921                                 device_register(&drive->gendev);
922                         }
923                 }
924         }
925         return 0;
926 }
927
928 int probe_hwif_init(ide_hwif_t *hwif)
929 {
930         return probe_hwif_init_with_fixup(hwif, NULL);
931 }
932
933 EXPORT_SYMBOL(probe_hwif_init);
934
935 #if MAX_HWIFS > 1
936 /*
937  * save_match() is used to simplify logic in init_irq() below.
938  *
939  * A loophole here is that we may not know about a particular
940  * hwif's irq until after that hwif is actually probed/initialized..
941  * This could be a problem for the case where an hwif is on a
942  * dual interface that requires serialization (eg. cmd640) and another
943  * hwif using one of the same irqs is initialized beforehand.
944  *
945  * This routine detects and reports such situations, but does not fix them.
946  */
947 static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match)
948 {
949         ide_hwif_t *m = *match;
950
951         if (m && m->hwgroup && m->hwgroup != new->hwgroup) {
952                 if (!new->hwgroup)
953                         return;
954                 printk("%s: potential irq problem with %s and %s\n",
955                         hwif->name, new->name, m->name);
956         }
957         if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */
958                 *match = new;
959 }
960 #endif /* MAX_HWIFS > 1 */
961
962 /*
963  * init request queue
964  */
965 static int ide_init_queue(ide_drive_t *drive)
966 {
967         request_queue_t *q;
968         ide_hwif_t *hwif = HWIF(drive);
969         int max_sectors = 256;
970         int max_sg_entries = PRD_ENTRIES;
971
972         /*
973          *      Our default set up assumes the normal IDE case,
974          *      that is 64K segmenting, standard PRD setup
975          *      and LBA28. Some drivers then impose their own
976          *      limits and LBA48 we could raise it but as yet
977          *      do not.
978          */
979
980         q = blk_init_queue_node(do_ide_request, &ide_lock, hwif_to_node(hwif));
981         if (!q)
982                 return 1;
983
984         q->queuedata = drive;
985         blk_queue_segment_boundary(q, 0xffff);
986
987         if (!hwif->rqsize) {
988                 if (hwif->no_lba48 || hwif->no_lba48_dma)
989                         hwif->rqsize = 256;
990                 else
991                         hwif->rqsize = 65536;
992         }
993         if (hwif->rqsize < max_sectors)
994                 max_sectors = hwif->rqsize;
995         blk_queue_max_sectors(q, max_sectors);
996
997 #ifdef CONFIG_PCI
998         /* When we have an IOMMU, we may have a problem where pci_map_sg()
999          * creates segments that don't completely match our boundary
1000          * requirements and thus need to be broken up again. Because it
1001          * doesn't align properly either, we may actually have to break up
1002          * to more segments than what was we got in the first place, a max
1003          * worst case is twice as many.
1004          * This will be fixed once we teach pci_map_sg() about our boundary
1005          * requirements, hopefully soon. *FIXME*
1006          */
1007         if (!PCI_DMA_BUS_IS_PHYS)
1008                 max_sg_entries >>= 1;
1009 #endif /* CONFIG_PCI */
1010
1011         blk_queue_max_hw_segments(q, max_sg_entries);
1012         blk_queue_max_phys_segments(q, max_sg_entries);
1013
1014         /* assign drive queue */
1015         drive->queue = q;
1016
1017         /* needs drive->queue to be set */
1018         ide_toggle_bounce(drive, 1);
1019
1020         /* enable led activity for disk drives only */
1021         if (drive->media == ide_disk && hwif->led_act)
1022                 blk_queue_activity_fn(q, hwif->led_act, drive);
1023
1024         return 0;
1025 }
1026
1027 /*
1028  * This routine sets up the irq for an ide interface, and creates a new
1029  * hwgroup for the irq/hwif if none was previously assigned.
1030  *
1031  * Much of the code is for correctly detecting/handling irq sharing
1032  * and irq serialization situations.  This is somewhat complex because
1033  * it handles static as well as dynamic (PCMCIA) IDE interfaces.
1034  *
1035  * The SA_INTERRUPT in sa_flags means ide_intr() is always entered with
1036  * interrupts completely disabled.  This can be bad for interrupt latency,
1037  * but anything else has led to problems on some machines.  We re-enable
1038  * interrupts as much as we can safely do in most places.
1039  */
1040 static int init_irq (ide_hwif_t *hwif)
1041 {
1042         unsigned int index;
1043         ide_hwgroup_t *hwgroup;
1044         ide_hwif_t *match = NULL;
1045
1046
1047         BUG_ON(in_interrupt());
1048         BUG_ON(irqs_disabled());        
1049         BUG_ON(hwif == NULL);
1050
1051         down(&ide_cfg_sem);
1052         hwif->hwgroup = NULL;
1053 #if MAX_HWIFS > 1
1054         /*
1055          * Group up with any other hwifs that share our irq(s).
1056          */
1057         for (index = 0; index < MAX_HWIFS; index++) {
1058                 ide_hwif_t *h = &ide_hwifs[index];
1059                 if (h->hwgroup) {  /* scan only initialized hwif's */
1060                         if (hwif->irq == h->irq) {
1061                                 hwif->sharing_irq = h->sharing_irq = 1;
1062                                 if (hwif->chipset != ide_pci ||
1063                                     h->chipset != ide_pci) {
1064                                         save_match(hwif, h, &match);
1065                                 }
1066                         }
1067                         if (hwif->serialized) {
1068                                 if (hwif->mate && hwif->mate->irq == h->irq)
1069                                         save_match(hwif, h, &match);
1070                         }
1071                         if (h->serialized) {
1072                                 if (h->mate && hwif->irq == h->mate->irq)
1073                                         save_match(hwif, h, &match);
1074                         }
1075                 }
1076         }
1077 #endif /* MAX_HWIFS > 1 */
1078         /*
1079          * If we are still without a hwgroup, then form a new one
1080          */
1081         if (match) {
1082                 hwgroup = match->hwgroup;
1083                 hwif->hwgroup = hwgroup;
1084                 /*
1085                  * Link us into the hwgroup.
1086                  * This must be done early, do ensure that unexpected_intr
1087                  * can find the hwif and prevent irq storms.
1088                  * No drives are attached to the new hwif, choose_drive
1089                  * can't do anything stupid (yet).
1090                  * Add ourself as the 2nd entry to the hwgroup->hwif
1091                  * linked list, the first entry is the hwif that owns
1092                  * hwgroup->handler - do not change that.
1093                  */
1094                 spin_lock_irq(&ide_lock);
1095                 hwif->next = hwgroup->hwif->next;
1096                 hwgroup->hwif->next = hwif;
1097                 spin_unlock_irq(&ide_lock);
1098         } else {
1099                 hwgroup = kmalloc_node(sizeof(ide_hwgroup_t), GFP_KERNEL,
1100                                         hwif_to_node(hwif->drives[0].hwif));
1101                 if (!hwgroup)
1102                         goto out_up;
1103
1104                 hwif->hwgroup = hwgroup;
1105
1106                 memset(hwgroup, 0, sizeof(ide_hwgroup_t));
1107                 hwgroup->hwif     = hwif->next = hwif;
1108                 hwgroup->rq       = NULL;
1109                 hwgroup->handler  = NULL;
1110                 hwgroup->drive    = NULL;
1111                 hwgroup->busy     = 0;
1112                 init_timer(&hwgroup->timer);
1113                 hwgroup->timer.function = &ide_timer_expiry;
1114                 hwgroup->timer.data = (unsigned long) hwgroup;
1115         }
1116
1117         /*
1118          * Allocate the irq, if not already obtained for another hwif
1119          */
1120         if (!match || match->irq != hwif->irq) {
1121                 int sa = SA_INTERRUPT;
1122 #if defined(__mc68000__) || defined(CONFIG_APUS)
1123                 sa = SA_SHIRQ;
1124 #endif /* __mc68000__ || CONFIG_APUS */
1125
1126                 if (IDE_CHIPSET_IS_PCI(hwif->chipset)) {
1127                         sa = SA_SHIRQ;
1128 #ifndef CONFIG_IDEPCI_SHARE_IRQ
1129                         sa |= SA_INTERRUPT;
1130 #endif /* CONFIG_IDEPCI_SHARE_IRQ */
1131                 }
1132
1133                 if (hwif->io_ports[IDE_CONTROL_OFFSET])
1134                         /* clear nIEN */
1135                         hwif->OUTB(0x08, hwif->io_ports[IDE_CONTROL_OFFSET]);
1136
1137                 if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup))
1138                         goto out_unlink;
1139         }
1140
1141         /*
1142          * For any present drive:
1143          * - allocate the block device queue
1144          * - link drive into the hwgroup
1145          */
1146         for (index = 0; index < MAX_DRIVES; ++index) {
1147                 ide_drive_t *drive = &hwif->drives[index];
1148                 if (!drive->present)
1149                         continue;
1150                 if (ide_init_queue(drive)) {
1151                         printk(KERN_ERR "ide: failed to init %s\n",drive->name);
1152                         continue;
1153                 }
1154                 spin_lock_irq(&ide_lock);
1155                 if (!hwgroup->drive) {
1156                         /* first drive for hwgroup. */
1157                         drive->next = drive;
1158                         hwgroup->drive = drive;
1159                         hwgroup->hwif = HWIF(hwgroup->drive);
1160                 } else {
1161                         drive->next = hwgroup->drive->next;
1162                         hwgroup->drive->next = drive;
1163                 }
1164                 spin_unlock_irq(&ide_lock);
1165         }
1166
1167 #if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__)
1168         printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
1169                 hwif->io_ports[IDE_DATA_OFFSET],
1170                 hwif->io_ports[IDE_DATA_OFFSET]+7,
1171                 hwif->io_ports[IDE_CONTROL_OFFSET], hwif->irq);
1172 #elif defined(__sparc__)
1173         printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %s", hwif->name,
1174                 hwif->io_ports[IDE_DATA_OFFSET],
1175                 hwif->io_ports[IDE_DATA_OFFSET]+7,
1176                 hwif->io_ports[IDE_CONTROL_OFFSET], __irq_itoa(hwif->irq));
1177 #else
1178         printk("%s at 0x%08lx on irq %d", hwif->name,
1179                 hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);
1180 #endif /* __mc68000__ && CONFIG_APUS */
1181         if (match)
1182                 printk(" (%sed with %s)",
1183                         hwif->sharing_irq ? "shar" : "serializ", match->name);
1184         printk("\n");
1185         up(&ide_cfg_sem);
1186         return 0;
1187 out_unlink:
1188         spin_lock_irq(&ide_lock);
1189         if (hwif->next == hwif) {
1190                 BUG_ON(match);
1191                 BUG_ON(hwgroup->hwif != hwif);
1192                 kfree(hwgroup);
1193         } else {
1194                 ide_hwif_t *g;
1195                 g = hwgroup->hwif;
1196                 while (g->next != hwif)
1197                         g = g->next;
1198                 g->next = hwif->next;
1199                 if (hwgroup->hwif == hwif) {
1200                         /* Impossible. */
1201                         printk(KERN_ERR "Duh. Uninitialized hwif listed as active hwif.\n");
1202                         hwgroup->hwif = g;
1203                 }
1204                 BUG_ON(hwgroup->hwif == hwif);
1205         }
1206         spin_unlock_irq(&ide_lock);
1207 out_up:
1208         up(&ide_cfg_sem);
1209         return 1;
1210 }
1211
1212 static int ata_lock(dev_t dev, void *data)
1213 {
1214         /* FIXME: we want to pin hwif down */
1215         return 0;
1216 }
1217
1218 static struct kobject *ata_probe(dev_t dev, int *part, void *data)
1219 {
1220         ide_hwif_t *hwif = data;
1221         int unit = *part >> PARTN_BITS;
1222         ide_drive_t *drive = &hwif->drives[unit];
1223         if (!drive->present)
1224                 return NULL;
1225
1226         if (drive->media == ide_disk)
1227                 request_module("ide-disk");
1228         if (drive->scsi)
1229                 request_module("ide-scsi");
1230         if (drive->media == ide_cdrom || drive->media == ide_optical)
1231                 request_module("ide-cd");
1232         if (drive->media == ide_tape)
1233                 request_module("ide-tape");
1234         if (drive->media == ide_floppy)
1235                 request_module("ide-floppy");
1236
1237         return NULL;
1238 }
1239
1240 static struct kobject *exact_match(dev_t dev, int *part, void *data)
1241 {
1242         struct gendisk *p = data;
1243         *part &= (1 << PARTN_BITS) - 1;
1244         return &p->kobj;
1245 }
1246
1247 static int exact_lock(dev_t dev, void *data)
1248 {
1249         struct gendisk *p = data;
1250
1251         if (!get_disk(p))
1252                 return -1;
1253         return 0;
1254 }
1255
1256 void ide_register_region(struct gendisk *disk)
1257 {
1258         blk_register_region(MKDEV(disk->major, disk->first_minor),
1259                             disk->minors, NULL, exact_match, exact_lock, disk);
1260 }
1261
1262 EXPORT_SYMBOL_GPL(ide_register_region);
1263
1264 void ide_unregister_region(struct gendisk *disk)
1265 {
1266         blk_unregister_region(MKDEV(disk->major, disk->first_minor),
1267                               disk->minors);
1268 }
1269
1270 EXPORT_SYMBOL_GPL(ide_unregister_region);
1271
1272 void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
1273 {
1274         ide_hwif_t *hwif = drive->hwif;
1275         unsigned int unit = (drive->select.all >> 4) & 1;
1276
1277         disk->major = hwif->major;
1278         disk->first_minor = unit << PARTN_BITS;
1279         sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
1280         disk->queue = drive->queue;
1281 }
1282
1283 EXPORT_SYMBOL_GPL(ide_init_disk);
1284
1285 static void ide_remove_drive_from_hwgroup(ide_drive_t *drive)
1286 {
1287         ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
1288
1289         if (drive == drive->next) {
1290                 /* special case: last drive from hwgroup. */
1291                 BUG_ON(hwgroup->drive != drive);
1292                 hwgroup->drive = NULL;
1293         } else {
1294                 ide_drive_t *walk;
1295
1296                 walk = hwgroup->drive;
1297                 while (walk->next != drive)
1298                         walk = walk->next;
1299                 walk->next = drive->next;
1300                 if (hwgroup->drive == drive) {
1301                         hwgroup->drive = drive->next;
1302                         hwgroup->hwif = hwgroup->drive->hwif;
1303                 }
1304         }
1305         BUG_ON(hwgroup->drive == drive);
1306 }
1307
1308 static void drive_release_dev (struct device *dev)
1309 {
1310         ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
1311
1312         spin_lock_irq(&ide_lock);
1313         if (drive->devfs_name[0] != '\0') {
1314                 devfs_remove(drive->devfs_name);
1315                 drive->devfs_name[0] = '\0';
1316         }
1317         ide_remove_drive_from_hwgroup(drive);
1318         kfree(drive->id);
1319         drive->id = NULL;
1320         drive->present = 0;
1321         /* Messed up locking ... */
1322         spin_unlock_irq(&ide_lock);
1323         blk_cleanup_queue(drive->queue);
1324         spin_lock_irq(&ide_lock);
1325         drive->queue = NULL;
1326         spin_unlock_irq(&ide_lock);
1327
1328         up(&drive->gendev_rel_sem);
1329 }
1330
1331 /*
1332  * init_gendisk() (as opposed to ide_geninit) is called for each major device,
1333  * after probing for drives, to allocate partition tables and other data
1334  * structures needed for the routines in genhd.c.  ide_geninit() gets called
1335  * somewhat later, during the partition check.
1336  */
1337 static void init_gendisk (ide_hwif_t *hwif)
1338 {
1339         unsigned int unit;
1340
1341         for (unit = 0; unit < MAX_DRIVES; ++unit) {
1342                 ide_drive_t * drive = &hwif->drives[unit];
1343                 ide_add_generic_settings(drive);
1344                 snprintf(drive->gendev.bus_id,BUS_ID_SIZE,"%u.%u",
1345                          hwif->index,unit);
1346                 drive->gendev.parent = &hwif->gendev;
1347                 drive->gendev.bus = &ide_bus_type;
1348                 drive->gendev.driver_data = drive;
1349                 drive->gendev.release = drive_release_dev;
1350                 if (drive->present) {
1351                         sprintf(drive->devfs_name, "ide/host%d/bus%d/target%d/lun%d",
1352                                 (hwif->channel && hwif->mate) ?
1353                                 hwif->mate->index : hwif->index,
1354                                 hwif->channel, unit, drive->lun);
1355                 }
1356         }
1357         blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
1358                         THIS_MODULE, ata_probe, ata_lock, hwif);
1359 }
1360
1361 static int hwif_init(ide_hwif_t *hwif)
1362 {
1363         int old_irq;
1364
1365         /* Return success if no device is connected */
1366         if (!hwif->present)
1367                 return 1;
1368
1369         if (!hwif->irq) {
1370                 if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET])))
1371                 {
1372                         printk("%s: DISABLED, NO IRQ\n", hwif->name);
1373                         return (hwif->present = 0);
1374                 }
1375         }
1376 #ifdef CONFIG_BLK_DEV_HD
1377         if (hwif->irq == HD_IRQ && hwif->io_ports[IDE_DATA_OFFSET] != HD_DATA) {
1378                 printk("%s: CANNOT SHARE IRQ WITH OLD "
1379                         "HARDDISK DRIVER (hd.c)\n", hwif->name);
1380                 return (hwif->present = 0);
1381         }
1382 #endif /* CONFIG_BLK_DEV_HD */
1383
1384         /* we set it back to 1 if all is ok below */    
1385         hwif->present = 0;
1386
1387         if (register_blkdev(hwif->major, hwif->name))
1388                 return 0;
1389
1390         if (!hwif->sg_max_nents)
1391                 hwif->sg_max_nents = PRD_ENTRIES;
1392
1393         hwif->sg_table = kmalloc(sizeof(struct scatterlist)*hwif->sg_max_nents,
1394                                  GFP_KERNEL);
1395         if (!hwif->sg_table) {
1396                 printk(KERN_ERR "%s: unable to allocate SG table.\n", hwif->name);
1397                 goto out;
1398         }
1399         
1400         if (init_irq(hwif) == 0)
1401                 goto done;
1402
1403         old_irq = hwif->irq;
1404         /*
1405          *      It failed to initialise. Find the default IRQ for 
1406          *      this port and try that.
1407          */
1408         if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]))) {
1409                 printk("%s: Disabled unable to get IRQ %d.\n",
1410                         hwif->name, old_irq);
1411                 goto out;
1412         }
1413         if (init_irq(hwif)) {
1414                 printk("%s: probed IRQ %d and default IRQ %d failed.\n",
1415                         hwif->name, old_irq, hwif->irq);
1416                 goto out;
1417         }
1418         printk("%s: probed IRQ %d failed, using default.\n",
1419                 hwif->name, hwif->irq);
1420
1421 done:
1422         init_gendisk(hwif);
1423         hwif->present = 1;      /* success */
1424         return 1;
1425
1426 out:
1427         unregister_blkdev(hwif->major, hwif->name);
1428         return 0;
1429 }
1430
1431 int ideprobe_init (void)
1432 {
1433         unsigned int index;
1434         int probe[MAX_HWIFS];
1435
1436         memset(probe, 0, MAX_HWIFS * sizeof(int));
1437         for (index = 0; index < MAX_HWIFS; ++index)
1438                 probe[index] = !ide_hwifs[index].present;
1439
1440         for (index = 0; index < MAX_HWIFS; ++index)
1441                 if (probe[index])
1442                         probe_hwif(&ide_hwifs[index]);
1443         for (index = 0; index < MAX_HWIFS; ++index)
1444                 if (probe[index])
1445                         hwif_init(&ide_hwifs[index]);
1446         for (index = 0; index < MAX_HWIFS; ++index) {
1447                 if (probe[index]) {
1448                         ide_hwif_t *hwif = &ide_hwifs[index];
1449                         int unit;
1450                         if (!hwif->present)
1451                                 continue;
1452                         if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced)
1453                                 hwif->chipset = ide_generic;
1454                         for (unit = 0; unit < MAX_DRIVES; ++unit)
1455                                 if (hwif->drives[unit].present)
1456                                         device_register(&hwif->drives[unit].gendev);
1457                 }
1458         }
1459         return 0;
1460 }
1461
1462 EXPORT_SYMBOL_GPL(ideprobe_init);