Drivers: edac: remove __dev* attributes.
[linux-3.10.git] / drivers / edac / i82975x_edac.c
1 /*
2  * Intel 82975X Memory Controller kernel module
3  * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com)
4  * (C) 2007 jetzbroadband (http://jetzbroadband.com)
5  * This file may be distributed under the terms of the
6  * GNU General Public License.
7  *
8  * Written by Arvind R.
9  *   Copied from i82875p_edac.c source:
10  */
11
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/pci.h>
15 #include <linux/pci_ids.h>
16 #include <linux/edac.h>
17 #include "edac_core.h"
18
19 #define I82975X_REVISION        " Ver: 1.0.0"
20 #define EDAC_MOD_STR            "i82975x_edac"
21
22 #define i82975x_printk(level, fmt, arg...) \
23         edac_printk(level, "i82975x", fmt, ##arg)
24
25 #define i82975x_mc_printk(mci, level, fmt, arg...) \
26         edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg)
27
28 #ifndef PCI_DEVICE_ID_INTEL_82975_0
29 #define PCI_DEVICE_ID_INTEL_82975_0     0x277c
30 #endif                          /* PCI_DEVICE_ID_INTEL_82975_0 */
31
32 #define I82975X_NR_DIMMS                8
33 #define I82975X_NR_CSROWS(nr_chans)     (I82975X_NR_DIMMS / (nr_chans))
34
35 /* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */
36 #define I82975X_EAP             0x58    /* Dram Error Address Pointer (32b)
37                                          *
38                                          * 31:7  128 byte cache-line address
39                                          * 6:1   reserved
40                                          * 0     0: CH0; 1: CH1
41                                          */
42
43 #define I82975X_DERRSYN         0x5c    /* Dram Error SYNdrome (8b)
44                                          *
45                                          *  7:0  DRAM ECC Syndrome
46                                          */
47
48 #define I82975X_DES             0x5d    /* Dram ERRor DeSTination (8b)
49                                          * 0h:    Processor Memory Reads
50                                          * 1h:7h  reserved
51                                          * More - See Page 65 of Intel DocSheet.
52                                          */
53
54 #define I82975X_ERRSTS          0xc8    /* Error Status Register (16b)
55                                          *
56                                          * 15:12 reserved
57                                          * 11    Thermal Sensor Event
58                                          * 10    reserved
59                                          *  9    non-DRAM lock error (ndlock)
60                                          *  8    Refresh Timeout
61                                          *  7:2  reserved
62                                          *  1    ECC UE (multibit DRAM error)
63                                          *  0    ECC CE (singlebit DRAM error)
64                                          */
65
66 /* Error Reporting is supported by 3 mechanisms:
67   1. DMI SERR generation  ( ERRCMD )
68   2. SMI DMI  generation  ( SMICMD )
69   3. SCI DMI  generation  ( SCICMD )
70 NOTE: Only ONE of the three must be enabled
71 */
72 #define I82975X_ERRCMD          0xca    /* Error Command (16b)
73                                          *
74                                          * 15:12 reserved
75                                          * 11    Thermal Sensor Event
76                                          * 10    reserved
77                                          *  9    non-DRAM lock error (ndlock)
78                                          *  8    Refresh Timeout
79                                          *  7:2  reserved
80                                          *  1    ECC UE (multibit DRAM error)
81                                          *  0    ECC CE (singlebit DRAM error)
82                                          */
83
84 #define I82975X_SMICMD          0xcc    /* Error Command (16b)
85                                          *
86                                          * 15:2  reserved
87                                          *  1    ECC UE (multibit DRAM error)
88                                          *  0    ECC CE (singlebit DRAM error)
89                                          */
90
91 #define I82975X_SCICMD          0xce    /* Error Command (16b)
92                                          *
93                                          * 15:2  reserved
94                                          *  1    ECC UE (multibit DRAM error)
95                                          *  0    ECC CE (singlebit DRAM error)
96                                          */
97
98 #define I82975X_XEAP    0xfc    /* Extended Dram Error Address Pointer (8b)
99                                          *
100                                          * 7:1   reserved
101                                          * 0     Bit32 of the Dram Error Address
102                                          */
103
104 #define I82975X_MCHBAR          0x44    /*
105                                          *
106                                          * 31:14 Base Addr of 16K memory-mapped
107                                          *      configuration space
108                                          * 13:1  reserverd
109                                          *  0    mem-mapped config space enable
110                                          */
111
112 /* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */
113 /* Intel 82975x memory mapped register space */
114
115 #define I82975X_DRB_SHIFT 25    /* fixed 32MiB grain */
116
117 #define I82975X_DRB             0x100   /* DRAM Row Boundary (8b x 8)
118                                          *
119                                          * 7   set to 1 in highest DRB of
120                                          *      channel if 4GB in ch.
121                                          * 6:2 upper boundary of rank in
122                                          *      32MB grains
123                                          * 1:0 set to 0
124                                          */
125 #define I82975X_DRB_CH0R0               0x100
126 #define I82975X_DRB_CH0R1               0x101
127 #define I82975X_DRB_CH0R2               0x102
128 #define I82975X_DRB_CH0R3               0x103
129 #define I82975X_DRB_CH1R0               0x180
130 #define I82975X_DRB_CH1R1               0x181
131 #define I82975X_DRB_CH1R2               0x182
132 #define I82975X_DRB_CH1R3               0x183
133
134
135 #define I82975X_DRA             0x108   /* DRAM Row Attribute (4b x 8)
136                                          *  defines the PAGE SIZE to be used
137                                          *      for the rank
138                                          *  7    reserved
139                                          *  6:4  row attr of odd rank, i.e. 1
140                                          *  3    reserved
141                                          *  2:0  row attr of even rank, i.e. 0
142                                          *
143                                          * 000 = unpopulated
144                                          * 001 = reserved
145                                          * 010 = 4KiB
146                                          * 011 = 8KiB
147                                          * 100 = 16KiB
148                                          * others = reserved
149                                          */
150 #define I82975X_DRA_CH0R01              0x108
151 #define I82975X_DRA_CH0R23              0x109
152 #define I82975X_DRA_CH1R01              0x188
153 #define I82975X_DRA_CH1R23              0x189
154
155
156 #define I82975X_BNKARC  0x10e /* Type of device in each rank - Bank Arch (16b)
157                                          *
158                                          * 15:8  reserved
159                                          * 7:6  Rank 3 architecture
160                                          * 5:4  Rank 2 architecture
161                                          * 3:2  Rank 1 architecture
162                                          * 1:0  Rank 0 architecture
163                                          *
164                                          * 00 => 4 banks
165                                          * 01 => 8 banks
166                                          */
167 #define I82975X_C0BNKARC        0x10e
168 #define I82975X_C1BNKARC        0x18e
169
170
171
172 #define I82975X_DRC             0x120 /* DRAM Controller Mode0 (32b)
173                                          *
174                                          * 31:30 reserved
175                                          * 29    init complete
176                                          * 28:11 reserved, according to Intel
177                                          *    22:21 number of channels
178                                          *              00=1 01=2 in 82875
179                                          *              seems to be ECC mode
180                                          *              bits in 82975 in Asus
181                                          *              P5W
182                                          *       19:18 Data Integ Mode
183                                          *              00=none 01=ECC in 82875
184                                          * 10:8  refresh mode
185                                          *  7    reserved
186                                          *  6:4  mode select
187                                          *  3:2  reserved
188                                          *  1:0  DRAM type 10=Second Revision
189                                          *              DDR2 SDRAM
190                                          *         00, 01, 11 reserved
191                                          */
192 #define I82975X_DRC_CH0M0               0x120
193 #define I82975X_DRC_CH1M0               0x1A0
194
195
196 #define I82975X_DRC_M1  0x124 /* DRAM Controller Mode1 (32b)
197                                          * 31   0=Standard Address Map
198                                          *      1=Enhanced Address Map
199                                          * 30:0 reserved
200                                          */
201
202 #define I82975X_DRC_CH0M1               0x124
203 #define I82975X_DRC_CH1M1               0x1A4
204
205 enum i82975x_chips {
206         I82975X = 0,
207 };
208
209 struct i82975x_pvt {
210         void __iomem *mch_window;
211 };
212
213 struct i82975x_dev_info {
214         const char *ctl_name;
215 };
216
217 struct i82975x_error_info {
218         u16 errsts;
219         u32 eap;
220         u8 des;
221         u8 derrsyn;
222         u16 errsts2;
223         u8 chan;                /* the channel is bit 0 of EAP */
224         u8 xeap;                /* extended eap bit */
225 };
226
227 static const struct i82975x_dev_info i82975x_devs[] = {
228         [I82975X] = {
229                 .ctl_name = "i82975x"
230         },
231 };
232
233 static struct pci_dev *mci_pdev;        /* init dev: in case that AGP code has
234                                          * already registered driver
235                                          */
236
237 static int i82975x_registered = 1;
238
239 static void i82975x_get_error_info(struct mem_ctl_info *mci,
240                 struct i82975x_error_info *info)
241 {
242         struct pci_dev *pdev;
243
244         pdev = to_pci_dev(mci->pdev);
245
246         /*
247          * This is a mess because there is no atomic way to read all the
248          * registers at once and the registers can transition from CE being
249          * overwritten by UE.
250          */
251         pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts);
252         pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
253         pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
254         pci_read_config_byte(pdev, I82975X_DES, &info->des);
255         pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn);
256         pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2);
257
258         pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003);
259
260         /*
261          * If the error is the same then we can for both reads then
262          * the first set of reads is valid.  If there is a change then
263          * there is a CE no info and the second set of reads is valid
264          * and should be UE info.
265          */
266         if (!(info->errsts2 & 0x0003))
267                 return;
268
269         if ((info->errsts ^ info->errsts2) & 0x0003) {
270                 pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
271                 pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
272                 pci_read_config_byte(pdev, I82975X_DES, &info->des);
273                 pci_read_config_byte(pdev, I82975X_DERRSYN,
274                                 &info->derrsyn);
275         }
276 }
277
278 static int i82975x_process_error_info(struct mem_ctl_info *mci,
279                 struct i82975x_error_info *info, int handle_errors)
280 {
281         int row, chan;
282         unsigned long offst, page;
283
284         if (!(info->errsts2 & 0x0003))
285                 return 0;
286
287         if (!handle_errors)
288                 return 1;
289
290         if ((info->errsts ^ info->errsts2) & 0x0003) {
291                 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
292                                      -1, -1, -1, "UE overwrote CE", "");
293                 info->errsts = info->errsts2;
294         }
295
296         page = (unsigned long) info->eap;
297         page >>= 1;
298         if (info->xeap & 1)
299                 page |= 0x80000000;
300         page >>= (PAGE_SHIFT - 1);
301         row = edac_mc_find_csrow_by_page(mci, page);
302
303         if (row == -1)  {
304                 i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n"
305                         "\tXEAP=%u\n"
306                         "\t EAP=0x%08x\n"
307                         "\tPAGE=0x%08x\n",
308                         (info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page);
309                 return 0;
310         }
311         chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1;
312         offst = info->eap
313                         & ((1 << PAGE_SHIFT) -
314                            (1 << mci->csrows[row]->channels[chan]->dimm->grain));
315
316         if (info->errsts & 0x0002)
317                 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
318                                      page, offst, 0,
319                                      row, -1, -1,
320                                      "i82975x UE", "");
321         else
322                 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
323                                      page, offst, info->derrsyn,
324                                      row, chan ? chan : 0, -1,
325                                      "i82975x CE", "");
326
327         return 1;
328 }
329
330 static void i82975x_check(struct mem_ctl_info *mci)
331 {
332         struct i82975x_error_info info;
333
334         edac_dbg(1, "MC%d\n", mci->mc_idx);
335         i82975x_get_error_info(mci, &info);
336         i82975x_process_error_info(mci, &info, 1);
337 }
338
339 /* Return 1 if dual channel mode is active.  Else return 0. */
340 static int dual_channel_active(void __iomem *mch_window)
341 {
342         /*
343          * We treat interleaved-symmetric configuration as dual-channel - EAP's
344          * bit-0 giving the channel of the error location.
345          *
346          * All other configurations are treated as single channel - the EAP's
347          * bit-0 will resolve ok in symmetric area of mixed
348          * (symmetric/asymmetric) configurations
349          */
350         u8      drb[4][2];
351         int     row;
352         int    dualch;
353
354         for (dualch = 1, row = 0; dualch && (row < 4); row++) {
355                 drb[row][0] = readb(mch_window + I82975X_DRB + row);
356                 drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80);
357                 dualch = dualch && (drb[row][0] == drb[row][1]);
358         }
359         return dualch;
360 }
361
362 static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank)
363 {
364         /*
365          * ECC is possible on i92975x ONLY with DEV_X8
366          */
367         return DEV_X8;
368 }
369
370 static void i82975x_init_csrows(struct mem_ctl_info *mci,
371                 struct pci_dev *pdev, void __iomem *mch_window)
372 {
373         struct csrow_info *csrow;
374         unsigned long last_cumul_size;
375         u8 value;
376         u32 cumul_size, nr_pages;
377         int index, chan;
378         struct dimm_info *dimm;
379         enum dev_type dtype;
380
381         last_cumul_size = 0;
382
383         /*
384          * 82875 comment:
385          * The dram row boundary (DRB) reg values are boundary address
386          * for each DRAM row with a granularity of 32 or 64MB (single/dual
387          * channel operation).  DRB regs are cumulative; therefore DRB7 will
388          * contain the total memory contained in all rows.
389          *
390          */
391
392         for (index = 0; index < mci->nr_csrows; index++) {
393                 csrow = mci->csrows[index];
394
395                 value = readb(mch_window + I82975X_DRB + index +
396                                         ((index >= 4) ? 0x80 : 0));
397                 cumul_size = value;
398                 cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT);
399                 /*
400                  * Adjust cumul_size w.r.t number of channels
401                  *
402                  */
403                 if (csrow->nr_channels > 1)
404                         cumul_size <<= 1;
405                 edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
406
407                 nr_pages = cumul_size - last_cumul_size;
408                 if (!nr_pages)
409                         continue;
410
411                 /*
412                  * Initialise dram labels
413                  * index values:
414                  *   [0-7] for single-channel; i.e. csrow->nr_channels = 1
415                  *   [0-3] for dual-channel; i.e. csrow->nr_channels = 2
416                  */
417                 dtype = i82975x_dram_type(mch_window, index);
418                 for (chan = 0; chan < csrow->nr_channels; chan++) {
419                         dimm = mci->csrows[index]->channels[chan]->dimm;
420
421                         dimm->nr_pages = nr_pages / csrow->nr_channels;
422
423                         snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d",
424                                  (chan == 0) ? 'A' : 'B',
425                                  index);
426                         dimm->grain = 1 << 7;   /* 128Byte cache-line resolution */
427                         dimm->dtype = i82975x_dram_type(mch_window, index);
428                         dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */
429                         dimm->edac_mode = EDAC_SECDED; /* only supported */
430                 }
431
432                 csrow->first_page = last_cumul_size;
433                 csrow->last_page = cumul_size - 1;
434                 last_cumul_size = cumul_size;
435         }
436 }
437
438 /* #define  i82975x_DEBUG_IOMEM */
439
440 #ifdef i82975x_DEBUG_IOMEM
441 static void i82975x_print_dram_timings(void __iomem *mch_window)
442 {
443         /*
444          * The register meanings are from Intel specs;
445          * (shows 13-5-5-5 for 800-DDR2)
446          * Asus P5W Bios reports 15-5-4-4
447          * What's your religion?
448          */
449         static const int caslats[4] = { 5, 4, 3, 6 };
450         u32     dtreg[2];
451
452         dtreg[0] = readl(mch_window + 0x114);
453         dtreg[1] = readl(mch_window + 0x194);
454         i82975x_printk(KERN_INFO, "DRAM Timings :     Ch0    Ch1\n"
455                 "                RAS Active Min = %d     %d\n"
456                 "                CAS latency    =  %d      %d\n"
457                 "                RAS to CAS     =  %d      %d\n"
458                 "                RAS precharge  =  %d      %d\n",
459                 (dtreg[0] >> 19 ) & 0x0f,
460                         (dtreg[1] >> 19) & 0x0f,
461                 caslats[(dtreg[0] >> 8) & 0x03],
462                         caslats[(dtreg[1] >> 8) & 0x03],
463                 ((dtreg[0] >> 4) & 0x07) + 2,
464                         ((dtreg[1] >> 4) & 0x07) + 2,
465                 (dtreg[0] & 0x07) + 2,
466                         (dtreg[1] & 0x07) + 2
467         );
468
469 }
470 #endif
471
472 static int i82975x_probe1(struct pci_dev *pdev, int dev_idx)
473 {
474         int rc = -ENODEV;
475         struct mem_ctl_info *mci;
476         struct edac_mc_layer layers[2];
477         struct i82975x_pvt *pvt;
478         void __iomem *mch_window;
479         u32 mchbar;
480         u32 drc[2];
481         struct i82975x_error_info discard;
482         int     chans;
483 #ifdef i82975x_DEBUG_IOMEM
484         u8 c0drb[4];
485         u8 c1drb[4];
486 #endif
487
488         edac_dbg(0, "\n");
489
490         pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar);
491         if (!(mchbar & 1)) {
492                 edac_dbg(3, "failed, MCHBAR disabled!\n");
493                 goto fail0;
494         }
495         mchbar &= 0xffffc000;   /* bits 31:14 used for 16K window */
496         mch_window = ioremap_nocache(mchbar, 0x1000);
497
498 #ifdef i82975x_DEBUG_IOMEM
499         i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n",
500                                         mchbar, mch_window);
501
502         c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0);
503         c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1);
504         c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2);
505         c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3);
506         c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0);
507         c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1);
508         c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2);
509         c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3);
510         i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]);
511         i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]);
512         i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]);
513         i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]);
514         i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]);
515         i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]);
516         i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]);
517         i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]);
518 #endif
519
520         drc[0] = readl(mch_window + I82975X_DRC_CH0M0);
521         drc[1] = readl(mch_window + I82975X_DRC_CH1M0);
522 #ifdef i82975x_DEBUG_IOMEM
523         i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0],
524                         ((drc[0] >> 21) & 3) == 1 ?
525                                 "ECC enabled" : "ECC disabled");
526         i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1],
527                         ((drc[1] >> 21) & 3) == 1 ?
528                                 "ECC enabled" : "ECC disabled");
529
530         i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n",
531                 readw(mch_window + I82975X_C0BNKARC));
532         i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n",
533                 readw(mch_window + I82975X_C1BNKARC));
534         i82975x_print_dram_timings(mch_window);
535         goto fail1;
536 #endif
537         if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) {
538                 i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n");
539                 goto fail1;
540         }
541
542         chans = dual_channel_active(mch_window) + 1;
543
544         /* assuming only one controller, index thus is 0 */
545         layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
546         layers[0].size = I82975X_NR_DIMMS;
547         layers[0].is_virt_csrow = true;
548         layers[1].type = EDAC_MC_LAYER_CHANNEL;
549         layers[1].size = I82975X_NR_CSROWS(chans);
550         layers[1].is_virt_csrow = false;
551         mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt));
552         if (!mci) {
553                 rc = -ENOMEM;
554                 goto fail1;
555         }
556
557         edac_dbg(3, "init mci\n");
558         mci->pdev = &pdev->dev;
559         mci->mtype_cap = MEM_FLAG_DDR2;
560         mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
561         mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
562         mci->mod_name = EDAC_MOD_STR;
563         mci->mod_ver = I82975X_REVISION;
564         mci->ctl_name = i82975x_devs[dev_idx].ctl_name;
565         mci->dev_name = pci_name(pdev);
566         mci->edac_check = i82975x_check;
567         mci->ctl_page_to_phys = NULL;
568         edac_dbg(3, "init pvt\n");
569         pvt = (struct i82975x_pvt *) mci->pvt_info;
570         pvt->mch_window = mch_window;
571         i82975x_init_csrows(mci, pdev, mch_window);
572         mci->scrub_mode = SCRUB_HW_SRC;
573         i82975x_get_error_info(mci, &discard);  /* clear counters */
574
575         /* finalize this instance of memory controller with edac core */
576         if (edac_mc_add_mc(mci)) {
577                 edac_dbg(3, "failed edac_mc_add_mc()\n");
578                 goto fail2;
579         }
580
581         /* get this far and it's successful */
582         edac_dbg(3, "success\n");
583         return 0;
584
585 fail2:
586         edac_mc_free(mci);
587
588 fail1:
589         iounmap(mch_window);
590 fail0:
591         return rc;
592 }
593
594 /* returns count (>= 0), or negative on error */
595 static int i82975x_init_one(struct pci_dev *pdev,
596                             const struct pci_device_id *ent)
597 {
598         int rc;
599
600         edac_dbg(0, "\n");
601
602         if (pci_enable_device(pdev) < 0)
603                 return -EIO;
604
605         rc = i82975x_probe1(pdev, ent->driver_data);
606
607         if (mci_pdev == NULL)
608                 mci_pdev = pci_dev_get(pdev);
609
610         return rc;
611 }
612
613 static void i82975x_remove_one(struct pci_dev *pdev)
614 {
615         struct mem_ctl_info *mci;
616         struct i82975x_pvt *pvt;
617
618         edac_dbg(0, "\n");
619
620         mci = edac_mc_del_mc(&pdev->dev);
621         if (mci  == NULL)
622                 return;
623
624         pvt = mci->pvt_info;
625         if (pvt->mch_window)
626                 iounmap( pvt->mch_window );
627
628         edac_mc_free(mci);
629 }
630
631 static DEFINE_PCI_DEVICE_TABLE(i82975x_pci_tbl) = {
632         {
633                 PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
634                 I82975X
635         },
636         {
637                 0,
638         }       /* 0 terminated list. */
639 };
640
641 MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl);
642
643 static struct pci_driver i82975x_driver = {
644         .name = EDAC_MOD_STR,
645         .probe = i82975x_init_one,
646         .remove = i82975x_remove_one,
647         .id_table = i82975x_pci_tbl,
648 };
649
650 static int __init i82975x_init(void)
651 {
652         int pci_rc;
653
654         edac_dbg(3, "\n");
655
656        /* Ensure that the OPSTATE is set correctly for POLL or NMI */
657        opstate_init();
658
659         pci_rc = pci_register_driver(&i82975x_driver);
660         if (pci_rc < 0)
661                 goto fail0;
662
663         if (mci_pdev == NULL) {
664                 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
665                                 PCI_DEVICE_ID_INTEL_82975_0, NULL);
666
667                 if (!mci_pdev) {
668                         edac_dbg(0, "i82975x pci_get_device fail\n");
669                         pci_rc = -ENODEV;
670                         goto fail1;
671                 }
672
673                 pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl);
674
675                 if (pci_rc < 0) {
676                         edac_dbg(0, "i82975x init fail\n");
677                         pci_rc = -ENODEV;
678                         goto fail1;
679                 }
680         }
681
682         return 0;
683
684 fail1:
685         pci_unregister_driver(&i82975x_driver);
686
687 fail0:
688         if (mci_pdev != NULL)
689                 pci_dev_put(mci_pdev);
690
691         return pci_rc;
692 }
693
694 static void __exit i82975x_exit(void)
695 {
696         edac_dbg(3, "\n");
697
698         pci_unregister_driver(&i82975x_driver);
699
700         if (!i82975x_registered) {
701                 i82975x_remove_one(mci_pdev);
702                 pci_dev_put(mci_pdev);
703         }
704 }
705
706 module_init(i82975x_init);
707 module_exit(i82975x_exit);
708
709 MODULE_LICENSE("GPL");
710 MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>");
711 MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers");
712
713 module_param(edac_op_state, int, 0444);
714 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");