8e7c78131e324f640358bcee95482d4b84896924
[linux-3.10.git] / drivers / char / pcmcia / synclink_cs.c
1 /*
2  * linux/drivers/char/pcmcia/synclink_cs.c
3  *
4  * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
5  *
6  * Device driver for Microgate SyncLink PC Card
7  * multiprotocol serial adapter.
8  *
9  * written by Paul Fulghum for Microgate Corporation
10  * paulkf@microgate.com
11  *
12  * Microgate and SyncLink are trademarks of Microgate Corporation
13  *
14  * This code is released under the GNU General Public License (GPL)
15  *
16  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
19  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
20  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
21  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
22  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
24  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
26  * OF THE POSSIBILITY OF SUCH DAMAGE.
27  */
28
29 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
30 #if defined(__i386__)
31 #  define BREAKPOINT() asm("   int $3");
32 #else
33 #  define BREAKPOINT() { }
34 #endif
35
36 #define MAX_DEVICE_COUNT 4
37
38 #include <linux/module.h>
39 #include <linux/errno.h>
40 #include <linux/signal.h>
41 #include <linux/sched.h>
42 #include <linux/timer.h>
43 #include <linux/time.h>
44 #include <linux/interrupt.h>
45 #include <linux/tty.h>
46 #include <linux/tty_flip.h>
47 #include <linux/serial.h>
48 #include <linux/major.h>
49 #include <linux/string.h>
50 #include <linux/fcntl.h>
51 #include <linux/ptrace.h>
52 #include <linux/ioport.h>
53 #include <linux/mm.h>
54 #include <linux/seq_file.h>
55 #include <linux/slab.h>
56 #include <linux/netdevice.h>
57 #include <linux/vmalloc.h>
58 #include <linux/init.h>
59 #include <linux/delay.h>
60 #include <linux/ioctl.h>
61 #include <linux/synclink.h>
62
63 #include <asm/system.h>
64 #include <asm/io.h>
65 #include <asm/irq.h>
66 #include <asm/dma.h>
67 #include <linux/bitops.h>
68 #include <asm/types.h>
69 #include <linux/termios.h>
70 #include <linux/workqueue.h>
71 #include <linux/hdlc.h>
72
73 #include <pcmcia/cs.h>
74 #include <pcmcia/cistpl.h>
75 #include <pcmcia/cisreg.h>
76 #include <pcmcia/ds.h>
77
78 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE))
79 #define SYNCLINK_GENERIC_HDLC 1
80 #else
81 #define SYNCLINK_GENERIC_HDLC 0
82 #endif
83
84 #define GET_USER(error,value,addr) error = get_user(value,addr)
85 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
86 #define PUT_USER(error,value,addr) error = put_user(value,addr)
87 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
88
89 #include <asm/uaccess.h>
90
91 static MGSL_PARAMS default_params = {
92         MGSL_MODE_HDLC,                 /* unsigned long mode */
93         0,                              /* unsigned char loopback; */
94         HDLC_FLAG_UNDERRUN_ABORT15,     /* unsigned short flags; */
95         HDLC_ENCODING_NRZI_SPACE,       /* unsigned char encoding; */
96         0,                              /* unsigned long clock_speed; */
97         0xff,                           /* unsigned char addr_filter; */
98         HDLC_CRC_16_CCITT,              /* unsigned short crc_type; */
99         HDLC_PREAMBLE_LENGTH_8BITS,     /* unsigned char preamble_length; */
100         HDLC_PREAMBLE_PATTERN_NONE,     /* unsigned char preamble; */
101         9600,                           /* unsigned long data_rate; */
102         8,                              /* unsigned char data_bits; */
103         1,                              /* unsigned char stop_bits; */
104         ASYNC_PARITY_NONE               /* unsigned char parity; */
105 };
106
107 typedef struct
108 {
109         int count;
110         unsigned char status;
111         char data[1];
112 } RXBUF;
113
114 /* The queue of BH actions to be performed */
115
116 #define BH_RECEIVE  1
117 #define BH_TRANSMIT 2
118 #define BH_STATUS   4
119
120 #define IO_PIN_SHUTDOWN_LIMIT 100
121
122 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
123
124 struct _input_signal_events {
125         int     ri_up;
126         int     ri_down;
127         int     dsr_up;
128         int     dsr_down;
129         int     dcd_up;
130         int     dcd_down;
131         int     cts_up;
132         int     cts_down;
133 };
134
135
136 /*
137  * Device instance data structure
138  */
139
140 typedef struct _mgslpc_info {
141         struct tty_port         port;
142         void *if_ptr;   /* General purpose pointer (used by SPPP) */
143         int                     magic;
144         int                     line;
145
146         struct mgsl_icount      icount;
147
148         int                     timeout;
149         int                     x_char;         /* xon/xoff character */
150         unsigned char           read_status_mask;
151         unsigned char           ignore_status_mask;
152
153         unsigned char *tx_buf;
154         int            tx_put;
155         int            tx_get;
156         int            tx_count;
157
158         /* circular list of fixed length rx buffers */
159
160         unsigned char  *rx_buf;        /* memory allocated for all rx buffers */
161         int            rx_buf_total_size; /* size of memory allocated for rx buffers */
162         int            rx_put;         /* index of next empty rx buffer */
163         int            rx_get;         /* index of next full rx buffer */
164         int            rx_buf_size;    /* size in bytes of single rx buffer */
165         int            rx_buf_count;   /* total number of rx buffers */
166         int            rx_frame_count; /* number of full rx buffers */
167
168         wait_queue_head_t       status_event_wait_q;
169         wait_queue_head_t       event_wait_q;
170         struct timer_list       tx_timer;       /* HDLC transmit timeout timer */
171         struct _mgslpc_info     *next_device;   /* device list link */
172
173         unsigned short imra_value;
174         unsigned short imrb_value;
175         unsigned char  pim_value;
176
177         spinlock_t lock;
178         struct work_struct task;                /* task structure for scheduling bh */
179
180         u32 max_frame_size;
181
182         u32 pending_bh;
183
184         bool bh_running;
185         bool bh_requested;
186
187         int dcd_chkcount; /* check counts to prevent */
188         int cts_chkcount; /* too many IRQs if a signal */
189         int dsr_chkcount; /* is floating */
190         int ri_chkcount;
191
192         bool rx_enabled;
193         bool rx_overflow;
194
195         bool tx_enabled;
196         bool tx_active;
197         bool tx_aborting;
198         u32 idle_mode;
199
200         int if_mode; /* serial interface selection (RS-232, v.35 etc) */
201
202         char device_name[25];           /* device instance name */
203
204         unsigned int io_base;   /* base I/O address of adapter */
205         unsigned int irq_level;
206
207         MGSL_PARAMS params;             /* communications parameters */
208
209         unsigned char serial_signals;   /* current serial signal states */
210
211         bool irq_occurred;              /* for diagnostics use */
212         char testing_irq;
213         unsigned int init_error;        /* startup error (DIAGS)        */
214
215         char flag_buf[MAX_ASYNC_BUFFER_SIZE];
216         bool drop_rts_on_tx_done;
217
218         struct  _input_signal_events    input_signal_events;
219
220         /* PCMCIA support */
221         struct pcmcia_device    *p_dev;
222         int                   stop;
223
224         /* SPPP/Cisco HDLC device parts */
225         int netcount;
226         spinlock_t netlock;
227
228 #if SYNCLINK_GENERIC_HDLC
229         struct net_device *netdev;
230 #endif
231
232 } MGSLPC_INFO;
233
234 #define MGSLPC_MAGIC 0x5402
235
236 /*
237  * The size of the serial xmit buffer is 1 page, or 4096 bytes
238  */
239 #define TXBUFSIZE 4096
240
241
242 #define CHA     0x00   /* channel A offset */
243 #define CHB     0x40   /* channel B offset */
244
245 /*
246  *  FIXME: PPC has PVR defined in asm/reg.h.  For now we just undef it.
247  */
248 #undef PVR
249
250 #define RXFIFO  0
251 #define TXFIFO  0
252 #define STAR    0x20
253 #define CMDR    0x20
254 #define RSTA    0x21
255 #define PRE     0x21
256 #define MODE    0x22
257 #define TIMR    0x23
258 #define XAD1    0x24
259 #define XAD2    0x25
260 #define RAH1    0x26
261 #define RAH2    0x27
262 #define DAFO    0x27
263 #define RAL1    0x28
264 #define RFC     0x28
265 #define RHCR    0x29
266 #define RAL2    0x29
267 #define RBCL    0x2a
268 #define XBCL    0x2a
269 #define RBCH    0x2b
270 #define XBCH    0x2b
271 #define CCR0    0x2c
272 #define CCR1    0x2d
273 #define CCR2    0x2e
274 #define CCR3    0x2f
275 #define VSTR    0x34
276 #define BGR     0x34
277 #define RLCR    0x35
278 #define AML     0x36
279 #define AMH     0x37
280 #define GIS     0x38
281 #define IVA     0x38
282 #define IPC     0x39
283 #define ISR     0x3a
284 #define IMR     0x3a
285 #define PVR     0x3c
286 #define PIS     0x3d
287 #define PIM     0x3d
288 #define PCR     0x3e
289 #define CCR4    0x3f
290
291 // IMR/ISR
292
293 #define IRQ_BREAK_ON    BIT15   // rx break detected
294 #define IRQ_DATAOVERRUN BIT14   // receive data overflow
295 #define IRQ_ALLSENT     BIT13   // all sent
296 #define IRQ_UNDERRUN    BIT12   // transmit data underrun
297 #define IRQ_TIMER       BIT11   // timer interrupt
298 #define IRQ_CTS         BIT10   // CTS status change
299 #define IRQ_TXREPEAT    BIT9    // tx message repeat
300 #define IRQ_TXFIFO      BIT8    // transmit pool ready
301 #define IRQ_RXEOM       BIT7    // receive message end
302 #define IRQ_EXITHUNT    BIT6    // receive frame start
303 #define IRQ_RXTIME      BIT6    // rx char timeout
304 #define IRQ_DCD         BIT2    // carrier detect status change
305 #define IRQ_OVERRUN     BIT1    // receive frame overflow
306 #define IRQ_RXFIFO      BIT0    // receive pool full
307
308 // STAR
309
310 #define XFW   BIT6              // transmit FIFO write enable
311 #define CEC   BIT2              // command executing
312 #define CTS   BIT1              // CTS state
313
314 #define PVR_DTR      BIT0
315 #define PVR_DSR      BIT1
316 #define PVR_RI       BIT2
317 #define PVR_AUTOCTS  BIT3
318 #define PVR_RS232    0x20   /* 0010b */
319 #define PVR_V35      0xe0   /* 1110b */
320 #define PVR_RS422    0x40   /* 0100b */
321
322 /* Register access functions */
323
324 #define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
325 #define read_reg(info, reg) inb((info)->io_base + (reg))
326
327 #define read_reg16(info, reg) inw((info)->io_base + (reg))
328 #define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
329
330 #define set_reg_bits(info, reg, mask) \
331     write_reg(info, (reg), \
332                  (unsigned char) (read_reg(info, (reg)) | (mask)))
333 #define clear_reg_bits(info, reg, mask) \
334     write_reg(info, (reg), \
335                  (unsigned char) (read_reg(info, (reg)) & ~(mask)))
336 /*
337  * interrupt enable/disable routines
338  */
339 static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
340 {
341         if (channel == CHA) {
342                 info->imra_value |= mask;
343                 write_reg16(info, CHA + IMR, info->imra_value);
344         } else {
345                 info->imrb_value |= mask;
346                 write_reg16(info, CHB + IMR, info->imrb_value);
347         }
348 }
349 static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
350 {
351         if (channel == CHA) {
352                 info->imra_value &= ~mask;
353                 write_reg16(info, CHA + IMR, info->imra_value);
354         } else {
355                 info->imrb_value &= ~mask;
356                 write_reg16(info, CHB + IMR, info->imrb_value);
357         }
358 }
359
360 #define port_irq_disable(info, mask) \
361   { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
362
363 #define port_irq_enable(info, mask) \
364   { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
365
366 static void rx_start(MGSLPC_INFO *info);
367 static void rx_stop(MGSLPC_INFO *info);
368
369 static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty);
370 static void tx_stop(MGSLPC_INFO *info);
371 static void tx_set_idle(MGSLPC_INFO *info);
372
373 static void get_signals(MGSLPC_INFO *info);
374 static void set_signals(MGSLPC_INFO *info);
375
376 static void reset_device(MGSLPC_INFO *info);
377
378 static void hdlc_mode(MGSLPC_INFO *info);
379 static void async_mode(MGSLPC_INFO *info);
380
381 static void tx_timeout(unsigned long context);
382
383 static int carrier_raised(struct tty_port *port);
384 static void dtr_rts(struct tty_port *port, int onoff);
385
386 #if SYNCLINK_GENERIC_HDLC
387 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
388 static void hdlcdev_tx_done(MGSLPC_INFO *info);
389 static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
390 static int  hdlcdev_init(MGSLPC_INFO *info);
391 static void hdlcdev_exit(MGSLPC_INFO *info);
392 #endif
393
394 static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
395
396 static bool register_test(MGSLPC_INFO *info);
397 static bool irq_test(MGSLPC_INFO *info);
398 static int adapter_test(MGSLPC_INFO *info);
399
400 static int claim_resources(MGSLPC_INFO *info);
401 static void release_resources(MGSLPC_INFO *info);
402 static void mgslpc_add_device(MGSLPC_INFO *info);
403 static void mgslpc_remove_device(MGSLPC_INFO *info);
404
405 static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty);
406 static void rx_reset_buffers(MGSLPC_INFO *info);
407 static int  rx_alloc_buffers(MGSLPC_INFO *info);
408 static void rx_free_buffers(MGSLPC_INFO *info);
409
410 static irqreturn_t mgslpc_isr(int irq, void *dev_id);
411
412 /*
413  * Bottom half interrupt handlers
414  */
415 static void bh_handler(struct work_struct *work);
416 static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty);
417 static void bh_status(MGSLPC_INFO *info);
418
419 /*
420  * ioctl handlers
421  */
422 static int tiocmget(struct tty_struct *tty, struct file *file);
423 static int tiocmset(struct tty_struct *tty, struct file *file,
424                     unsigned int set, unsigned int clear);
425 static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
426 static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
427 static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty);
428 static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
429 static int set_txidle(MGSLPC_INFO *info, int idle_mode);
430 static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty);
431 static int tx_abort(MGSLPC_INFO *info);
432 static int set_rxenable(MGSLPC_INFO *info, int enable);
433 static int wait_events(MGSLPC_INFO *info, int __user *mask);
434
435 static MGSLPC_INFO *mgslpc_device_list = NULL;
436 static int mgslpc_device_count = 0;
437
438 /*
439  * Set this param to non-zero to load eax with the
440  * .text section address and breakpoint on module load.
441  * This is useful for use with gdb and add-symbol-file command.
442  */
443 static int break_on_load=0;
444
445 /*
446  * Driver major number, defaults to zero to get auto
447  * assigned major number. May be forced as module parameter.
448  */
449 static int ttymajor=0;
450
451 static int debug_level = 0;
452 static int maxframe[MAX_DEVICE_COUNT] = {0,};
453
454 module_param(break_on_load, bool, 0);
455 module_param(ttymajor, int, 0);
456 module_param(debug_level, int, 0);
457 module_param_array(maxframe, int, NULL, 0);
458
459 MODULE_LICENSE("GPL");
460
461 static char *driver_name = "SyncLink PC Card driver";
462 static char *driver_version = "$Revision: 4.34 $";
463
464 static struct tty_driver *serial_driver;
465
466 /* number of characters left in xmit buffer before we ask for more */
467 #define WAKEUP_CHARS 256
468
469 static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty);
470 static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
471
472 /* PCMCIA prototypes */
473
474 static int mgslpc_config(struct pcmcia_device *link);
475 static void mgslpc_release(u_long arg);
476 static void mgslpc_detach(struct pcmcia_device *p_dev);
477
478 /*
479  * 1st function defined in .text section. Calling this function in
480  * init_module() followed by a breakpoint allows a remote debugger
481  * (gdb) to get the .text address for the add-symbol-file command.
482  * This allows remote debugging of dynamically loadable modules.
483  */
484 static void* mgslpc_get_text_ptr(void)
485 {
486         return mgslpc_get_text_ptr;
487 }
488
489 /**
490  * line discipline callback wrappers
491  *
492  * The wrappers maintain line discipline references
493  * while calling into the line discipline.
494  *
495  * ldisc_receive_buf  - pass receive data to line discipline
496  */
497
498 static void ldisc_receive_buf(struct tty_struct *tty,
499                               const __u8 *data, char *flags, int count)
500 {
501         struct tty_ldisc *ld;
502         if (!tty)
503                 return;
504         ld = tty_ldisc_ref(tty);
505         if (ld) {
506                 if (ld->ops->receive_buf)
507                         ld->ops->receive_buf(tty, data, flags, count);
508                 tty_ldisc_deref(ld);
509         }
510 }
511
512 static const struct tty_port_operations mgslpc_port_ops = {
513         .carrier_raised = carrier_raised,
514         .dtr_rts = dtr_rts
515 };
516
517 static int mgslpc_probe(struct pcmcia_device *link)
518 {
519     MGSLPC_INFO *info;
520     int ret;
521
522     if (debug_level >= DEBUG_LEVEL_INFO)
523             printk("mgslpc_attach\n");
524
525     info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
526     if (!info) {
527             printk("Error can't allocate device instance data\n");
528             return -ENOMEM;
529     }
530
531     info->magic = MGSLPC_MAGIC;
532     tty_port_init(&info->port);
533     info->port.ops = &mgslpc_port_ops;
534     INIT_WORK(&info->task, bh_handler);
535     info->max_frame_size = 4096;
536     info->port.close_delay = 5*HZ/10;
537     info->port.closing_wait = 30*HZ;
538     init_waitqueue_head(&info->status_event_wait_q);
539     init_waitqueue_head(&info->event_wait_q);
540     spin_lock_init(&info->lock);
541     spin_lock_init(&info->netlock);
542     memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
543     info->idle_mode = HDLC_TXIDLE_FLAGS;
544     info->imra_value = 0xffff;
545     info->imrb_value = 0xffff;
546     info->pim_value = 0xff;
547
548     info->p_dev = link;
549     link->priv = info;
550
551     /* Initialize the struct pcmcia_device structure */
552
553     link->conf.Attributes = 0;
554     link->conf.IntType = INT_MEMORY_AND_IO;
555
556     ret = mgslpc_config(link);
557     if (ret)
558             return ret;
559
560     mgslpc_add_device(info);
561
562     return 0;
563 }
564
565 /* Card has been inserted.
566  */
567
568 static int mgslpc_ioprobe(struct pcmcia_device *p_dev,
569                           cistpl_cftable_entry_t *cfg,
570                           cistpl_cftable_entry_t *dflt,
571                           unsigned int vcc,
572                           void *priv_data)
573 {
574         if (!cfg->io.nwin)
575                 return -ENODEV;
576
577         p_dev->resource[0]->start = cfg->io.win[0].base;
578         p_dev->resource[0]->end = cfg->io.win[0].len;
579         p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
580         p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
581
582         return pcmcia_request_io(p_dev);
583 }
584
585 static int mgslpc_config(struct pcmcia_device *link)
586 {
587     MGSLPC_INFO *info = link->priv;
588     int ret;
589
590     if (debug_level >= DEBUG_LEVEL_INFO)
591             printk("mgslpc_config(0x%p)\n", link);
592
593     ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL);
594     if (ret != 0)
595             goto failed;
596
597     link->conf.Attributes = CONF_ENABLE_IRQ;
598     link->conf.IntType = INT_MEMORY_AND_IO;
599     link->conf.ConfigIndex = 8;
600     link->conf.Present = PRESENT_OPTION;
601
602     ret = pcmcia_request_irq(link, mgslpc_isr);
603     if (ret)
604             goto failed;
605     ret = pcmcia_request_configuration(link, &link->conf);
606     if (ret)
607             goto failed;
608
609     info->io_base = link->resource[0]->start;
610     info->irq_level = link->irq;
611
612     dev_info(&link->dev, "index 0x%02x:",
613             link->conf.ConfigIndex);
614     if (link->conf.Attributes & CONF_ENABLE_IRQ)
615             printk(", irq %d", link->irq);
616     if (link->resource[0])
617             printk(", io %pR", link->resource[0]);
618     printk("\n");
619     return 0;
620
621 failed:
622     mgslpc_release((u_long)link);
623     return -ENODEV;
624 }
625
626 /* Card has been removed.
627  * Unregister device and release PCMCIA configuration.
628  * If device is open, postpone until it is closed.
629  */
630 static void mgslpc_release(u_long arg)
631 {
632         struct pcmcia_device *link = (struct pcmcia_device *)arg;
633
634         if (debug_level >= DEBUG_LEVEL_INFO)
635                 printk("mgslpc_release(0x%p)\n", link);
636
637         pcmcia_disable_device(link);
638 }
639
640 static void mgslpc_detach(struct pcmcia_device *link)
641 {
642         if (debug_level >= DEBUG_LEVEL_INFO)
643                 printk("mgslpc_detach(0x%p)\n", link);
644
645         ((MGSLPC_INFO *)link->priv)->stop = 1;
646         mgslpc_release((u_long)link);
647
648         mgslpc_remove_device((MGSLPC_INFO *)link->priv);
649 }
650
651 static int mgslpc_suspend(struct pcmcia_device *link)
652 {
653         MGSLPC_INFO *info = link->priv;
654
655         info->stop = 1;
656
657         return 0;
658 }
659
660 static int mgslpc_resume(struct pcmcia_device *link)
661 {
662         MGSLPC_INFO *info = link->priv;
663
664         info->stop = 0;
665
666         return 0;
667 }
668
669
670 static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info,
671                                         char *name, const char *routine)
672 {
673 #ifdef MGSLPC_PARANOIA_CHECK
674         static const char *badmagic =
675                 "Warning: bad magic number for mgsl struct (%s) in %s\n";
676         static const char *badinfo =
677                 "Warning: null mgslpc_info for (%s) in %s\n";
678
679         if (!info) {
680                 printk(badinfo, name, routine);
681                 return true;
682         }
683         if (info->magic != MGSLPC_MAGIC) {
684                 printk(badmagic, name, routine);
685                 return true;
686         }
687 #else
688         if (!info)
689                 return true;
690 #endif
691         return false;
692 }
693
694
695 #define CMD_RXFIFO      BIT7    // release current rx FIFO
696 #define CMD_RXRESET     BIT6    // receiver reset
697 #define CMD_RXFIFO_READ BIT5
698 #define CMD_START_TIMER BIT4
699 #define CMD_TXFIFO      BIT3    // release current tx FIFO
700 #define CMD_TXEOM       BIT1    // transmit end message
701 #define CMD_TXRESET     BIT0    // transmit reset
702
703 static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
704 {
705         int i = 0;
706         /* wait for command completion */
707         while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
708                 udelay(1);
709                 if (i++ == 1000)
710                         return false;
711         }
712         return true;
713 }
714
715 static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
716 {
717         wait_command_complete(info, channel);
718         write_reg(info, (unsigned char) (channel + CMDR), cmd);
719 }
720
721 static void tx_pause(struct tty_struct *tty)
722 {
723         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
724         unsigned long flags;
725
726         if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
727                 return;
728         if (debug_level >= DEBUG_LEVEL_INFO)
729                 printk("tx_pause(%s)\n",info->device_name);
730
731         spin_lock_irqsave(&info->lock,flags);
732         if (info->tx_enabled)
733                 tx_stop(info);
734         spin_unlock_irqrestore(&info->lock,flags);
735 }
736
737 static void tx_release(struct tty_struct *tty)
738 {
739         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
740         unsigned long flags;
741
742         if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
743                 return;
744         if (debug_level >= DEBUG_LEVEL_INFO)
745                 printk("tx_release(%s)\n",info->device_name);
746
747         spin_lock_irqsave(&info->lock,flags);
748         if (!info->tx_enabled)
749                 tx_start(info, tty);
750         spin_unlock_irqrestore(&info->lock,flags);
751 }
752
753 /* Return next bottom half action to perform.
754  * or 0 if nothing to do.
755  */
756 static int bh_action(MGSLPC_INFO *info)
757 {
758         unsigned long flags;
759         int rc = 0;
760
761         spin_lock_irqsave(&info->lock,flags);
762
763         if (info->pending_bh & BH_RECEIVE) {
764                 info->pending_bh &= ~BH_RECEIVE;
765                 rc = BH_RECEIVE;
766         } else if (info->pending_bh & BH_TRANSMIT) {
767                 info->pending_bh &= ~BH_TRANSMIT;
768                 rc = BH_TRANSMIT;
769         } else if (info->pending_bh & BH_STATUS) {
770                 info->pending_bh &= ~BH_STATUS;
771                 rc = BH_STATUS;
772         }
773
774         if (!rc) {
775                 /* Mark BH routine as complete */
776                 info->bh_running = false;
777                 info->bh_requested = false;
778         }
779
780         spin_unlock_irqrestore(&info->lock,flags);
781
782         return rc;
783 }
784
785 static void bh_handler(struct work_struct *work)
786 {
787         MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task);
788         struct tty_struct *tty;
789         int action;
790
791         if (!info)
792                 return;
793
794         if (debug_level >= DEBUG_LEVEL_BH)
795                 printk( "%s(%d):bh_handler(%s) entry\n",
796                         __FILE__,__LINE__,info->device_name);
797
798         info->bh_running = true;
799         tty = tty_port_tty_get(&info->port);
800
801         while((action = bh_action(info)) != 0) {
802
803                 /* Process work item */
804                 if ( debug_level >= DEBUG_LEVEL_BH )
805                         printk( "%s(%d):bh_handler() work item action=%d\n",
806                                 __FILE__,__LINE__,action);
807
808                 switch (action) {
809
810                 case BH_RECEIVE:
811                         while(rx_get_frame(info, tty));
812                         break;
813                 case BH_TRANSMIT:
814                         bh_transmit(info, tty);
815                         break;
816                 case BH_STATUS:
817                         bh_status(info);
818                         break;
819                 default:
820                         /* unknown work item ID */
821                         printk("Unknown work item ID=%08X!\n", action);
822                         break;
823                 }
824         }
825
826         tty_kref_put(tty);
827         if (debug_level >= DEBUG_LEVEL_BH)
828                 printk( "%s(%d):bh_handler(%s) exit\n",
829                         __FILE__,__LINE__,info->device_name);
830 }
831
832 static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty)
833 {
834         if (debug_level >= DEBUG_LEVEL_BH)
835                 printk("bh_transmit() entry on %s\n", info->device_name);
836
837         if (tty)
838                 tty_wakeup(tty);
839 }
840
841 static void bh_status(MGSLPC_INFO *info)
842 {
843         info->ri_chkcount = 0;
844         info->dsr_chkcount = 0;
845         info->dcd_chkcount = 0;
846         info->cts_chkcount = 0;
847 }
848
849 /* eom: non-zero = end of frame */
850 static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
851 {
852         unsigned char data[2];
853         unsigned char fifo_count, read_count, i;
854         RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
855
856         if (debug_level >= DEBUG_LEVEL_ISR)
857                 printk("%s(%d):rx_ready_hdlc(eom=%d)\n",__FILE__,__LINE__,eom);
858
859         if (!info->rx_enabled)
860                 return;
861
862         if (info->rx_frame_count >= info->rx_buf_count) {
863                 /* no more free buffers */
864                 issue_command(info, CHA, CMD_RXRESET);
865                 info->pending_bh |= BH_RECEIVE;
866                 info->rx_overflow = true;
867                 info->icount.buf_overrun++;
868                 return;
869         }
870
871         if (eom) {
872                 /* end of frame, get FIFO count from RBCL register */
873                 if (!(fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f)))
874                         fifo_count = 32;
875         } else
876                 fifo_count = 32;
877
878         do {
879                 if (fifo_count == 1) {
880                         read_count = 1;
881                         data[0] = read_reg(info, CHA + RXFIFO);
882                 } else {
883                         read_count = 2;
884                         *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
885                 }
886                 fifo_count -= read_count;
887                 if (!fifo_count && eom)
888                         buf->status = data[--read_count];
889
890                 for (i = 0; i < read_count; i++) {
891                         if (buf->count >= info->max_frame_size) {
892                                 /* frame too large, reset receiver and reset current buffer */
893                                 issue_command(info, CHA, CMD_RXRESET);
894                                 buf->count = 0;
895                                 return;
896                         }
897                         *(buf->data + buf->count) = data[i];
898                         buf->count++;
899                 }
900         } while (fifo_count);
901
902         if (eom) {
903                 info->pending_bh |= BH_RECEIVE;
904                 info->rx_frame_count++;
905                 info->rx_put++;
906                 if (info->rx_put >= info->rx_buf_count)
907                         info->rx_put = 0;
908         }
909         issue_command(info, CHA, CMD_RXFIFO);
910 }
911
912 static void rx_ready_async(MGSLPC_INFO *info, int tcd, struct tty_struct *tty)
913 {
914         unsigned char data, status, flag;
915         int fifo_count;
916         int work = 0;
917         struct mgsl_icount *icount = &info->icount;
918
919         if (tcd) {
920                 /* early termination, get FIFO count from RBCL register */
921                 fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
922
923                 /* Zero fifo count could mean 0 or 32 bytes available.
924                  * If BIT5 of STAR is set then at least 1 byte is available.
925                  */
926                 if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
927                         fifo_count = 32;
928         } else
929                 fifo_count = 32;
930
931         tty_buffer_request_room(tty, fifo_count);
932         /* Flush received async data to receive data buffer. */
933         while (fifo_count) {
934                 data   = read_reg(info, CHA + RXFIFO);
935                 status = read_reg(info, CHA + RXFIFO);
936                 fifo_count -= 2;
937
938                 icount->rx++;
939                 flag = TTY_NORMAL;
940
941                 // if no frameing/crc error then save data
942                 // BIT7:parity error
943                 // BIT6:framing error
944
945                 if (status & (BIT7 + BIT6)) {
946                         if (status & BIT7)
947                                 icount->parity++;
948                         else
949                                 icount->frame++;
950
951                         /* discard char if tty control flags say so */
952                         if (status & info->ignore_status_mask)
953                                 continue;
954
955                         status &= info->read_status_mask;
956
957                         if (status & BIT7)
958                                 flag = TTY_PARITY;
959                         else if (status & BIT6)
960                                 flag = TTY_FRAME;
961                 }
962                 work += tty_insert_flip_char(tty, data, flag);
963         }
964         issue_command(info, CHA, CMD_RXFIFO);
965
966         if (debug_level >= DEBUG_LEVEL_ISR) {
967                 printk("%s(%d):rx_ready_async",
968                         __FILE__,__LINE__);
969                 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
970                         __FILE__,__LINE__,icount->rx,icount->brk,
971                         icount->parity,icount->frame,icount->overrun);
972         }
973
974         if (work)
975                 tty_flip_buffer_push(tty);
976 }
977
978
979 static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty)
980 {
981         if (!info->tx_active)
982                 return;
983
984         info->tx_active = false;
985         info->tx_aborting = false;
986
987         if (info->params.mode == MGSL_MODE_ASYNC)
988                 return;
989
990         info->tx_count = info->tx_put = info->tx_get = 0;
991         del_timer(&info->tx_timer);
992
993         if (info->drop_rts_on_tx_done) {
994                 get_signals(info);
995                 if (info->serial_signals & SerialSignal_RTS) {
996                         info->serial_signals &= ~SerialSignal_RTS;
997                         set_signals(info);
998                 }
999                 info->drop_rts_on_tx_done = false;
1000         }
1001
1002 #if SYNCLINK_GENERIC_HDLC
1003         if (info->netcount)
1004                 hdlcdev_tx_done(info);
1005         else
1006 #endif
1007         {
1008                 if (tty->stopped || tty->hw_stopped) {
1009                         tx_stop(info);
1010                         return;
1011                 }
1012                 info->pending_bh |= BH_TRANSMIT;
1013         }
1014 }
1015
1016 static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty)
1017 {
1018         unsigned char fifo_count = 32;
1019         int c;
1020
1021         if (debug_level >= DEBUG_LEVEL_ISR)
1022                 printk("%s(%d):tx_ready(%s)\n", __FILE__,__LINE__,info->device_name);
1023
1024         if (info->params.mode == MGSL_MODE_HDLC) {
1025                 if (!info->tx_active)
1026                         return;
1027         } else {
1028                 if (tty->stopped || tty->hw_stopped) {
1029                         tx_stop(info);
1030                         return;
1031                 }
1032                 if (!info->tx_count)
1033                         info->tx_active = false;
1034         }
1035
1036         if (!info->tx_count)
1037                 return;
1038
1039         while (info->tx_count && fifo_count) {
1040                 c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
1041
1042                 if (c == 1) {
1043                         write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
1044                 } else {
1045                         write_reg16(info, CHA + TXFIFO,
1046                                           *((unsigned short*)(info->tx_buf + info->tx_get)));
1047                 }
1048                 info->tx_count -= c;
1049                 info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
1050                 fifo_count -= c;
1051         }
1052
1053         if (info->params.mode == MGSL_MODE_ASYNC) {
1054                 if (info->tx_count < WAKEUP_CHARS)
1055                         info->pending_bh |= BH_TRANSMIT;
1056                 issue_command(info, CHA, CMD_TXFIFO);
1057         } else {
1058                 if (info->tx_count)
1059                         issue_command(info, CHA, CMD_TXFIFO);
1060                 else
1061                         issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
1062         }
1063 }
1064
1065 static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
1066 {
1067         get_signals(info);
1068         if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1069                 irq_disable(info, CHB, IRQ_CTS);
1070         info->icount.cts++;
1071         if (info->serial_signals & SerialSignal_CTS)
1072                 info->input_signal_events.cts_up++;
1073         else
1074                 info->input_signal_events.cts_down++;
1075         wake_up_interruptible(&info->status_event_wait_q);
1076         wake_up_interruptible(&info->event_wait_q);
1077
1078         if (info->port.flags & ASYNC_CTS_FLOW) {
1079                 if (tty->hw_stopped) {
1080                         if (info->serial_signals & SerialSignal_CTS) {
1081                                 if (debug_level >= DEBUG_LEVEL_ISR)
1082                                         printk("CTS tx start...");
1083                                 if (tty)
1084                                         tty->hw_stopped = 0;
1085                                 tx_start(info, tty);
1086                                 info->pending_bh |= BH_TRANSMIT;
1087                                 return;
1088                         }
1089                 } else {
1090                         if (!(info->serial_signals & SerialSignal_CTS)) {
1091                                 if (debug_level >= DEBUG_LEVEL_ISR)
1092                                         printk("CTS tx stop...");
1093                                 if (tty)
1094                                         tty->hw_stopped = 1;
1095                                 tx_stop(info);
1096                         }
1097                 }
1098         }
1099         info->pending_bh |= BH_STATUS;
1100 }
1101
1102 static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty)
1103 {
1104         get_signals(info);
1105         if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1106                 irq_disable(info, CHB, IRQ_DCD);
1107         info->icount.dcd++;
1108         if (info->serial_signals & SerialSignal_DCD) {
1109                 info->input_signal_events.dcd_up++;
1110         }
1111         else
1112                 info->input_signal_events.dcd_down++;
1113 #if SYNCLINK_GENERIC_HDLC
1114         if (info->netcount) {
1115                 if (info->serial_signals & SerialSignal_DCD)
1116                         netif_carrier_on(info->netdev);
1117                 else
1118                         netif_carrier_off(info->netdev);
1119         }
1120 #endif
1121         wake_up_interruptible(&info->status_event_wait_q);
1122         wake_up_interruptible(&info->event_wait_q);
1123
1124         if (info->port.flags & ASYNC_CHECK_CD) {
1125                 if (debug_level >= DEBUG_LEVEL_ISR)
1126                         printk("%s CD now %s...", info->device_name,
1127                                (info->serial_signals & SerialSignal_DCD) ? "on" : "off");
1128                 if (info->serial_signals & SerialSignal_DCD)
1129                         wake_up_interruptible(&info->port.open_wait);
1130                 else {
1131                         if (debug_level >= DEBUG_LEVEL_ISR)
1132                                 printk("doing serial hangup...");
1133                         if (tty)
1134                                 tty_hangup(tty);
1135                 }
1136         }
1137         info->pending_bh |= BH_STATUS;
1138 }
1139
1140 static void dsr_change(MGSLPC_INFO *info)
1141 {
1142         get_signals(info);
1143         if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1144                 port_irq_disable(info, PVR_DSR);
1145         info->icount.dsr++;
1146         if (info->serial_signals & SerialSignal_DSR)
1147                 info->input_signal_events.dsr_up++;
1148         else
1149                 info->input_signal_events.dsr_down++;
1150         wake_up_interruptible(&info->status_event_wait_q);
1151         wake_up_interruptible(&info->event_wait_q);
1152         info->pending_bh |= BH_STATUS;
1153 }
1154
1155 static void ri_change(MGSLPC_INFO *info)
1156 {
1157         get_signals(info);
1158         if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1159                 port_irq_disable(info, PVR_RI);
1160         info->icount.rng++;
1161         if (info->serial_signals & SerialSignal_RI)
1162                 info->input_signal_events.ri_up++;
1163         else
1164                 info->input_signal_events.ri_down++;
1165         wake_up_interruptible(&info->status_event_wait_q);
1166         wake_up_interruptible(&info->event_wait_q);
1167         info->pending_bh |= BH_STATUS;
1168 }
1169
1170 /* Interrupt service routine entry point.
1171  *
1172  * Arguments:
1173  *
1174  * irq     interrupt number that caused interrupt
1175  * dev_id  device ID supplied during interrupt registration
1176  */
1177 static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
1178 {
1179         MGSLPC_INFO *info = dev_id;
1180         struct tty_struct *tty;
1181         unsigned short isr;
1182         unsigned char gis, pis;
1183         int count=0;
1184
1185         if (debug_level >= DEBUG_LEVEL_ISR)
1186                 printk("mgslpc_isr(%d) entry.\n", info->irq_level);
1187
1188         if (!(info->p_dev->_locked))
1189                 return IRQ_HANDLED;
1190
1191         tty = tty_port_tty_get(&info->port);
1192
1193         spin_lock(&info->lock);
1194
1195         while ((gis = read_reg(info, CHA + GIS))) {
1196                 if (debug_level >= DEBUG_LEVEL_ISR)
1197                         printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
1198
1199                 if ((gis & 0x70) || count > 1000) {
1200                         printk("synclink_cs:hardware failed or ejected\n");
1201                         break;
1202                 }
1203                 count++;
1204
1205                 if (gis & (BIT1 + BIT0)) {
1206                         isr = read_reg16(info, CHB + ISR);
1207                         if (isr & IRQ_DCD)
1208                                 dcd_change(info, tty);
1209                         if (isr & IRQ_CTS)
1210                                 cts_change(info, tty);
1211                 }
1212                 if (gis & (BIT3 + BIT2))
1213                 {
1214                         isr = read_reg16(info, CHA + ISR);
1215                         if (isr & IRQ_TIMER) {
1216                                 info->irq_occurred = true;
1217                                 irq_disable(info, CHA, IRQ_TIMER);
1218                         }
1219
1220                         /* receive IRQs */
1221                         if (isr & IRQ_EXITHUNT) {
1222                                 info->icount.exithunt++;
1223                                 wake_up_interruptible(&info->event_wait_q);
1224                         }
1225                         if (isr & IRQ_BREAK_ON) {
1226                                 info->icount.brk++;
1227                                 if (info->port.flags & ASYNC_SAK)
1228                                         do_SAK(tty);
1229                         }
1230                         if (isr & IRQ_RXTIME) {
1231                                 issue_command(info, CHA, CMD_RXFIFO_READ);
1232                         }
1233                         if (isr & (IRQ_RXEOM + IRQ_RXFIFO)) {
1234                                 if (info->params.mode == MGSL_MODE_HDLC)
1235                                         rx_ready_hdlc(info, isr & IRQ_RXEOM);
1236                                 else
1237                                         rx_ready_async(info, isr & IRQ_RXEOM, tty);
1238                         }
1239
1240                         /* transmit IRQs */
1241                         if (isr & IRQ_UNDERRUN) {
1242                                 if (info->tx_aborting)
1243                                         info->icount.txabort++;
1244                                 else
1245                                         info->icount.txunder++;
1246                                 tx_done(info, tty);
1247                         }
1248                         else if (isr & IRQ_ALLSENT) {
1249                                 info->icount.txok++;
1250                                 tx_done(info, tty);
1251                         }
1252                         else if (isr & IRQ_TXFIFO)
1253                                 tx_ready(info, tty);
1254                 }
1255                 if (gis & BIT7) {
1256                         pis = read_reg(info, CHA + PIS);
1257                         if (pis & BIT1)
1258                                 dsr_change(info);
1259                         if (pis & BIT2)
1260                                 ri_change(info);
1261                 }
1262         }
1263
1264         /* Request bottom half processing if there's something
1265          * for it to do and the bh is not already running
1266          */
1267
1268         if (info->pending_bh && !info->bh_running && !info->bh_requested) {
1269                 if ( debug_level >= DEBUG_LEVEL_ISR )
1270                         printk("%s(%d):%s queueing bh task.\n",
1271                                 __FILE__,__LINE__,info->device_name);
1272                 schedule_work(&info->task);
1273                 info->bh_requested = true;
1274         }
1275
1276         spin_unlock(&info->lock);
1277         tty_kref_put(tty);
1278
1279         if (debug_level >= DEBUG_LEVEL_ISR)
1280                 printk("%s(%d):mgslpc_isr(%d)exit.\n",
1281                        __FILE__, __LINE__, info->irq_level);
1282
1283         return IRQ_HANDLED;
1284 }
1285
1286 /* Initialize and start device.
1287  */
1288 static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
1289 {
1290         int retval = 0;
1291
1292         if (debug_level >= DEBUG_LEVEL_INFO)
1293                 printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name);
1294
1295         if (info->port.flags & ASYNC_INITIALIZED)
1296                 return 0;
1297
1298         if (!info->tx_buf) {
1299                 /* allocate a page of memory for a transmit buffer */
1300                 info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1301                 if (!info->tx_buf) {
1302                         printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1303                                 __FILE__,__LINE__,info->device_name);
1304                         return -ENOMEM;
1305                 }
1306         }
1307
1308         info->pending_bh = 0;
1309
1310         memset(&info->icount, 0, sizeof(info->icount));
1311
1312         setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
1313
1314         /* Allocate and claim adapter resources */
1315         retval = claim_resources(info);
1316
1317         /* perform existance check and diagnostics */
1318         if ( !retval )
1319                 retval = adapter_test(info);
1320
1321         if ( retval ) {
1322                 if (capable(CAP_SYS_ADMIN) && tty)
1323                         set_bit(TTY_IO_ERROR, &tty->flags);
1324                 release_resources(info);
1325                 return retval;
1326         }
1327
1328         /* program hardware for current parameters */
1329         mgslpc_change_params(info, tty);
1330
1331         if (tty)
1332                 clear_bit(TTY_IO_ERROR, &tty->flags);
1333
1334         info->port.flags |= ASYNC_INITIALIZED;
1335
1336         return 0;
1337 }
1338
1339 /* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
1340  */
1341 static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
1342 {
1343         unsigned long flags;
1344
1345         if (!(info->port.flags & ASYNC_INITIALIZED))
1346                 return;
1347
1348         if (debug_level >= DEBUG_LEVEL_INFO)
1349                 printk("%s(%d):mgslpc_shutdown(%s)\n",
1350                          __FILE__,__LINE__, info->device_name );
1351
1352         /* clear status wait queue because status changes */
1353         /* can't happen after shutting down the hardware */
1354         wake_up_interruptible(&info->status_event_wait_q);
1355         wake_up_interruptible(&info->event_wait_q);
1356
1357         del_timer_sync(&info->tx_timer);
1358
1359         if (info->tx_buf) {
1360                 free_page((unsigned long) info->tx_buf);
1361                 info->tx_buf = NULL;
1362         }
1363
1364         spin_lock_irqsave(&info->lock,flags);
1365
1366         rx_stop(info);
1367         tx_stop(info);
1368
1369         /* TODO:disable interrupts instead of reset to preserve signal states */
1370         reset_device(info);
1371
1372         if (!tty || tty->termios->c_cflag & HUPCL) {
1373                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
1374                 set_signals(info);
1375         }
1376
1377         spin_unlock_irqrestore(&info->lock,flags);
1378
1379         release_resources(info);
1380
1381         if (tty)
1382                 set_bit(TTY_IO_ERROR, &tty->flags);
1383
1384         info->port.flags &= ~ASYNC_INITIALIZED;
1385 }
1386
1387 static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
1388 {
1389         unsigned long flags;
1390
1391         spin_lock_irqsave(&info->lock,flags);
1392
1393         rx_stop(info);
1394         tx_stop(info);
1395         info->tx_count = info->tx_put = info->tx_get = 0;
1396
1397         if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
1398                 hdlc_mode(info);
1399         else
1400                 async_mode(info);
1401
1402         set_signals(info);
1403
1404         info->dcd_chkcount = 0;
1405         info->cts_chkcount = 0;
1406         info->ri_chkcount = 0;
1407         info->dsr_chkcount = 0;
1408
1409         irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
1410         port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
1411         get_signals(info);
1412
1413         if (info->netcount || (tty && (tty->termios->c_cflag & CREAD)))
1414                 rx_start(info);
1415
1416         spin_unlock_irqrestore(&info->lock,flags);
1417 }
1418
1419 /* Reconfigure adapter based on new parameters
1420  */
1421 static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
1422 {
1423         unsigned cflag;
1424         int bits_per_char;
1425
1426         if (!tty || !tty->termios)
1427                 return;
1428
1429         if (debug_level >= DEBUG_LEVEL_INFO)
1430                 printk("%s(%d):mgslpc_change_params(%s)\n",
1431                          __FILE__,__LINE__, info->device_name );
1432
1433         cflag = tty->termios->c_cflag;
1434
1435         /* if B0 rate (hangup) specified then negate DTR and RTS */
1436         /* otherwise assert DTR and RTS */
1437         if (cflag & CBAUD)
1438                 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1439         else
1440                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
1441
1442         /* byte size and parity */
1443
1444         switch (cflag & CSIZE) {
1445         case CS5: info->params.data_bits = 5; break;
1446         case CS6: info->params.data_bits = 6; break;
1447         case CS7: info->params.data_bits = 7; break;
1448         case CS8: info->params.data_bits = 8; break;
1449         default:  info->params.data_bits = 7; break;
1450         }
1451
1452         if (cflag & CSTOPB)
1453                 info->params.stop_bits = 2;
1454         else
1455                 info->params.stop_bits = 1;
1456
1457         info->params.parity = ASYNC_PARITY_NONE;
1458         if (cflag & PARENB) {
1459                 if (cflag & PARODD)
1460                         info->params.parity = ASYNC_PARITY_ODD;
1461                 else
1462                         info->params.parity = ASYNC_PARITY_EVEN;
1463 #ifdef CMSPAR
1464                 if (cflag & CMSPAR)
1465                         info->params.parity = ASYNC_PARITY_SPACE;
1466 #endif
1467         }
1468
1469         /* calculate number of jiffies to transmit a full
1470          * FIFO (32 bytes) at specified data rate
1471          */
1472         bits_per_char = info->params.data_bits +
1473                         info->params.stop_bits + 1;
1474
1475         /* if port data rate is set to 460800 or less then
1476          * allow tty settings to override, otherwise keep the
1477          * current data rate.
1478          */
1479         if (info->params.data_rate <= 460800) {
1480                 info->params.data_rate = tty_get_baud_rate(tty);
1481         }
1482
1483         if ( info->params.data_rate ) {
1484                 info->timeout = (32*HZ*bits_per_char) /
1485                                 info->params.data_rate;
1486         }
1487         info->timeout += HZ/50;         /* Add .02 seconds of slop */
1488
1489         if (cflag & CRTSCTS)
1490                 info->port.flags |= ASYNC_CTS_FLOW;
1491         else
1492                 info->port.flags &= ~ASYNC_CTS_FLOW;
1493
1494         if (cflag & CLOCAL)
1495                 info->port.flags &= ~ASYNC_CHECK_CD;
1496         else
1497                 info->port.flags |= ASYNC_CHECK_CD;
1498
1499         /* process tty input control flags */
1500
1501         info->read_status_mask = 0;
1502         if (I_INPCK(tty))
1503                 info->read_status_mask |= BIT7 | BIT6;
1504         if (I_IGNPAR(tty))
1505                 info->ignore_status_mask |= BIT7 | BIT6;
1506
1507         mgslpc_program_hw(info, tty);
1508 }
1509
1510 /* Add a character to the transmit buffer
1511  */
1512 static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
1513 {
1514         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1515         unsigned long flags;
1516
1517         if (debug_level >= DEBUG_LEVEL_INFO) {
1518                 printk( "%s(%d):mgslpc_put_char(%d) on %s\n",
1519                         __FILE__,__LINE__,ch,info->device_name);
1520         }
1521
1522         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
1523                 return 0;
1524
1525         if (!info->tx_buf)
1526                 return 0;
1527
1528         spin_lock_irqsave(&info->lock,flags);
1529
1530         if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
1531                 if (info->tx_count < TXBUFSIZE - 1) {
1532                         info->tx_buf[info->tx_put++] = ch;
1533                         info->tx_put &= TXBUFSIZE-1;
1534                         info->tx_count++;
1535                 }
1536         }
1537
1538         spin_unlock_irqrestore(&info->lock,flags);
1539         return 1;
1540 }
1541
1542 /* Enable transmitter so remaining characters in the
1543  * transmit buffer are sent.
1544  */
1545 static void mgslpc_flush_chars(struct tty_struct *tty)
1546 {
1547         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1548         unsigned long flags;
1549
1550         if (debug_level >= DEBUG_LEVEL_INFO)
1551                 printk( "%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
1552                         __FILE__,__LINE__,info->device_name,info->tx_count);
1553
1554         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
1555                 return;
1556
1557         if (info->tx_count <= 0 || tty->stopped ||
1558             tty->hw_stopped || !info->tx_buf)
1559                 return;
1560
1561         if (debug_level >= DEBUG_LEVEL_INFO)
1562                 printk( "%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
1563                         __FILE__,__LINE__,info->device_name);
1564
1565         spin_lock_irqsave(&info->lock,flags);
1566         if (!info->tx_active)
1567                 tx_start(info, tty);
1568         spin_unlock_irqrestore(&info->lock,flags);
1569 }
1570
1571 /* Send a block of data
1572  *
1573  * Arguments:
1574  *
1575  * tty        pointer to tty information structure
1576  * buf        pointer to buffer containing send data
1577  * count      size of send data in bytes
1578  *
1579  * Returns: number of characters written
1580  */
1581 static int mgslpc_write(struct tty_struct * tty,
1582                         const unsigned char *buf, int count)
1583 {
1584         int c, ret = 0;
1585         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1586         unsigned long flags;
1587
1588         if (debug_level >= DEBUG_LEVEL_INFO)
1589                 printk( "%s(%d):mgslpc_write(%s) count=%d\n",
1590                         __FILE__,__LINE__,info->device_name,count);
1591
1592         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
1593                 !info->tx_buf)
1594                 goto cleanup;
1595
1596         if (info->params.mode == MGSL_MODE_HDLC) {
1597                 if (count > TXBUFSIZE) {
1598                         ret = -EIO;
1599                         goto cleanup;
1600                 }
1601                 if (info->tx_active)
1602                         goto cleanup;
1603                 else if (info->tx_count)
1604                         goto start;
1605         }
1606
1607         for (;;) {
1608                 c = min(count,
1609                         min(TXBUFSIZE - info->tx_count - 1,
1610                             TXBUFSIZE - info->tx_put));
1611                 if (c <= 0)
1612                         break;
1613
1614                 memcpy(info->tx_buf + info->tx_put, buf, c);
1615
1616                 spin_lock_irqsave(&info->lock,flags);
1617                 info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
1618                 info->tx_count += c;
1619                 spin_unlock_irqrestore(&info->lock,flags);
1620
1621                 buf += c;
1622                 count -= c;
1623                 ret += c;
1624         }
1625 start:
1626         if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1627                 spin_lock_irqsave(&info->lock,flags);
1628                 if (!info->tx_active)
1629                         tx_start(info, tty);
1630                 spin_unlock_irqrestore(&info->lock,flags);
1631         }
1632 cleanup:
1633         if (debug_level >= DEBUG_LEVEL_INFO)
1634                 printk( "%s(%d):mgslpc_write(%s) returning=%d\n",
1635                         __FILE__,__LINE__,info->device_name,ret);
1636         return ret;
1637 }
1638
1639 /* Return the count of free bytes in transmit buffer
1640  */
1641 static int mgslpc_write_room(struct tty_struct *tty)
1642 {
1643         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1644         int ret;
1645
1646         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
1647                 return 0;
1648
1649         if (info->params.mode == MGSL_MODE_HDLC) {
1650                 /* HDLC (frame oriented) mode */
1651                 if (info->tx_active)
1652                         return 0;
1653                 else
1654                         return HDLC_MAX_FRAME_SIZE;
1655         } else {
1656                 ret = TXBUFSIZE - info->tx_count - 1;
1657                 if (ret < 0)
1658                         ret = 0;
1659         }
1660
1661         if (debug_level >= DEBUG_LEVEL_INFO)
1662                 printk("%s(%d):mgslpc_write_room(%s)=%d\n",
1663                          __FILE__,__LINE__, info->device_name, ret);
1664         return ret;
1665 }
1666
1667 /* Return the count of bytes in transmit buffer
1668  */
1669 static int mgslpc_chars_in_buffer(struct tty_struct *tty)
1670 {
1671         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1672         int rc;
1673
1674         if (debug_level >= DEBUG_LEVEL_INFO)
1675                 printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
1676                          __FILE__,__LINE__, info->device_name );
1677
1678         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
1679                 return 0;
1680
1681         if (info->params.mode == MGSL_MODE_HDLC)
1682                 rc = info->tx_active ? info->max_frame_size : 0;
1683         else
1684                 rc = info->tx_count;
1685
1686         if (debug_level >= DEBUG_LEVEL_INFO)
1687                 printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n",
1688                          __FILE__,__LINE__, info->device_name, rc);
1689
1690         return rc;
1691 }
1692
1693 /* Discard all data in the send buffer
1694  */
1695 static void mgslpc_flush_buffer(struct tty_struct *tty)
1696 {
1697         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1698         unsigned long flags;
1699
1700         if (debug_level >= DEBUG_LEVEL_INFO)
1701                 printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
1702                          __FILE__,__LINE__, info->device_name );
1703
1704         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
1705                 return;
1706
1707         spin_lock_irqsave(&info->lock,flags);
1708         info->tx_count = info->tx_put = info->tx_get = 0;
1709         del_timer(&info->tx_timer);
1710         spin_unlock_irqrestore(&info->lock,flags);
1711
1712         wake_up_interruptible(&tty->write_wait);
1713         tty_wakeup(tty);
1714 }
1715
1716 /* Send a high-priority XON/XOFF character
1717  */
1718 static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
1719 {
1720         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1721         unsigned long flags;
1722
1723         if (debug_level >= DEBUG_LEVEL_INFO)
1724                 printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
1725                          __FILE__,__LINE__, info->device_name, ch );
1726
1727         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
1728                 return;
1729
1730         info->x_char = ch;
1731         if (ch) {
1732                 spin_lock_irqsave(&info->lock,flags);
1733                 if (!info->tx_enabled)
1734                         tx_start(info, tty);
1735                 spin_unlock_irqrestore(&info->lock,flags);
1736         }
1737 }
1738
1739 /* Signal remote device to throttle send data (our receive data)
1740  */
1741 static void mgslpc_throttle(struct tty_struct * tty)
1742 {
1743         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1744         unsigned long flags;
1745
1746         if (debug_level >= DEBUG_LEVEL_INFO)
1747                 printk("%s(%d):mgslpc_throttle(%s) entry\n",
1748                          __FILE__,__LINE__, info->device_name );
1749
1750         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
1751                 return;
1752
1753         if (I_IXOFF(tty))
1754                 mgslpc_send_xchar(tty, STOP_CHAR(tty));
1755
1756         if (tty->termios->c_cflag & CRTSCTS) {
1757                 spin_lock_irqsave(&info->lock,flags);
1758                 info->serial_signals &= ~SerialSignal_RTS;
1759                 set_signals(info);
1760                 spin_unlock_irqrestore(&info->lock,flags);
1761         }
1762 }
1763
1764 /* Signal remote device to stop throttling send data (our receive data)
1765  */
1766 static void mgslpc_unthrottle(struct tty_struct * tty)
1767 {
1768         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1769         unsigned long flags;
1770
1771         if (debug_level >= DEBUG_LEVEL_INFO)
1772                 printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
1773                          __FILE__,__LINE__, info->device_name );
1774
1775         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
1776                 return;
1777
1778         if (I_IXOFF(tty)) {
1779                 if (info->x_char)
1780                         info->x_char = 0;
1781                 else
1782                         mgslpc_send_xchar(tty, START_CHAR(tty));
1783         }
1784
1785         if (tty->termios->c_cflag & CRTSCTS) {
1786                 spin_lock_irqsave(&info->lock,flags);
1787                 info->serial_signals |= SerialSignal_RTS;
1788                 set_signals(info);
1789                 spin_unlock_irqrestore(&info->lock,flags);
1790         }
1791 }
1792
1793 /* get the current serial statistics
1794  */
1795 static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
1796 {
1797         int err;
1798         if (debug_level >= DEBUG_LEVEL_INFO)
1799                 printk("get_params(%s)\n", info->device_name);
1800         if (!user_icount) {
1801                 memset(&info->icount, 0, sizeof(info->icount));
1802         } else {
1803                 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
1804                 if (err)
1805                         return -EFAULT;
1806         }
1807         return 0;
1808 }
1809
1810 /* get the current serial parameters
1811  */
1812 static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
1813 {
1814         int err;
1815         if (debug_level >= DEBUG_LEVEL_INFO)
1816                 printk("get_params(%s)\n", info->device_name);
1817         COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
1818         if (err)
1819                 return -EFAULT;
1820         return 0;
1821 }
1822
1823 /* set the serial parameters
1824  *
1825  * Arguments:
1826  *
1827  *      info            pointer to device instance data
1828  *      new_params      user buffer containing new serial params
1829  *
1830  * Returns:     0 if success, otherwise error code
1831  */
1832 static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty)
1833 {
1834         unsigned long flags;
1835         MGSL_PARAMS tmp_params;
1836         int err;
1837
1838         if (debug_level >= DEBUG_LEVEL_INFO)
1839                 printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
1840                         info->device_name );
1841         COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
1842         if (err) {
1843                 if ( debug_level >= DEBUG_LEVEL_INFO )
1844                         printk( "%s(%d):set_params(%s) user buffer copy failed\n",
1845                                 __FILE__,__LINE__,info->device_name);
1846                 return -EFAULT;
1847         }
1848
1849         spin_lock_irqsave(&info->lock,flags);
1850         memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
1851         spin_unlock_irqrestore(&info->lock,flags);
1852
1853         mgslpc_change_params(info, tty);
1854
1855         return 0;
1856 }
1857
1858 static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
1859 {
1860         int err;
1861         if (debug_level >= DEBUG_LEVEL_INFO)
1862                 printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
1863         COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
1864         if (err)
1865                 return -EFAULT;
1866         return 0;
1867 }
1868
1869 static int set_txidle(MGSLPC_INFO * info, int idle_mode)
1870 {
1871         unsigned long flags;
1872         if (debug_level >= DEBUG_LEVEL_INFO)
1873                 printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
1874         spin_lock_irqsave(&info->lock,flags);
1875         info->idle_mode = idle_mode;
1876         tx_set_idle(info);
1877         spin_unlock_irqrestore(&info->lock,flags);
1878         return 0;
1879 }
1880
1881 static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
1882 {
1883         int err;
1884         if (debug_level >= DEBUG_LEVEL_INFO)
1885                 printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
1886         COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
1887         if (err)
1888                 return -EFAULT;
1889         return 0;
1890 }
1891
1892 static int set_interface(MGSLPC_INFO * info, int if_mode)
1893 {
1894         unsigned long flags;
1895         unsigned char val;
1896         if (debug_level >= DEBUG_LEVEL_INFO)
1897                 printk("set_interface(%s,%d)\n", info->device_name, if_mode);
1898         spin_lock_irqsave(&info->lock,flags);
1899         info->if_mode = if_mode;
1900
1901         val = read_reg(info, PVR) & 0x0f;
1902         switch (info->if_mode)
1903         {
1904         case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
1905         case MGSL_INTERFACE_V35:   val |= PVR_V35;   break;
1906         case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
1907         }
1908         write_reg(info, PVR, val);
1909
1910         spin_unlock_irqrestore(&info->lock,flags);
1911         return 0;
1912 }
1913
1914 static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty)
1915 {
1916         unsigned long flags;
1917
1918         if (debug_level >= DEBUG_LEVEL_INFO)
1919                 printk("set_txenable(%s,%d)\n", info->device_name, enable);
1920
1921         spin_lock_irqsave(&info->lock,flags);
1922         if (enable) {
1923                 if (!info->tx_enabled)
1924                         tx_start(info, tty);
1925         } else {
1926                 if (info->tx_enabled)
1927                         tx_stop(info);
1928         }
1929         spin_unlock_irqrestore(&info->lock,flags);
1930         return 0;
1931 }
1932
1933 static int tx_abort(MGSLPC_INFO * info)
1934 {
1935         unsigned long flags;
1936
1937         if (debug_level >= DEBUG_LEVEL_INFO)
1938                 printk("tx_abort(%s)\n", info->device_name);
1939
1940         spin_lock_irqsave(&info->lock,flags);
1941         if (info->tx_active && info->tx_count &&
1942             info->params.mode == MGSL_MODE_HDLC) {
1943                 /* clear data count so FIFO is not filled on next IRQ.
1944                  * This results in underrun and abort transmission.
1945                  */
1946                 info->tx_count = info->tx_put = info->tx_get = 0;
1947                 info->tx_aborting = true;
1948         }
1949         spin_unlock_irqrestore(&info->lock,flags);
1950         return 0;
1951 }
1952
1953 static int set_rxenable(MGSLPC_INFO * info, int enable)
1954 {
1955         unsigned long flags;
1956
1957         if (debug_level >= DEBUG_LEVEL_INFO)
1958                 printk("set_rxenable(%s,%d)\n", info->device_name, enable);
1959
1960         spin_lock_irqsave(&info->lock,flags);
1961         if (enable) {
1962                 if (!info->rx_enabled)
1963                         rx_start(info);
1964         } else {
1965                 if (info->rx_enabled)
1966                         rx_stop(info);
1967         }
1968         spin_unlock_irqrestore(&info->lock,flags);
1969         return 0;
1970 }
1971
1972 /* wait for specified event to occur
1973  *
1974  * Arguments:           info    pointer to device instance data
1975  *                      mask    pointer to bitmask of events to wait for
1976  * Return Value:        0       if successful and bit mask updated with
1977  *                              of events triggerred,
1978  *                      otherwise error code
1979  */
1980 static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
1981 {
1982         unsigned long flags;
1983         int s;
1984         int rc=0;
1985         struct mgsl_icount cprev, cnow;
1986         int events;
1987         int mask;
1988         struct  _input_signal_events oldsigs, newsigs;
1989         DECLARE_WAITQUEUE(wait, current);
1990
1991         COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
1992         if (rc)
1993                 return  -EFAULT;
1994
1995         if (debug_level >= DEBUG_LEVEL_INFO)
1996                 printk("wait_events(%s,%d)\n", info->device_name, mask);
1997
1998         spin_lock_irqsave(&info->lock,flags);
1999
2000         /* return immediately if state matches requested events */
2001         get_signals(info);
2002         s = info->serial_signals;
2003         events = mask &
2004                 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2005                   ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2006                   ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2007                   ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2008         if (events) {
2009                 spin_unlock_irqrestore(&info->lock,flags);
2010                 goto exit;
2011         }
2012
2013         /* save current irq counts */
2014         cprev = info->icount;
2015         oldsigs = info->input_signal_events;
2016
2017         if ((info->params.mode == MGSL_MODE_HDLC) &&
2018             (mask & MgslEvent_ExitHuntMode))
2019                 irq_enable(info, CHA, IRQ_EXITHUNT);
2020
2021         set_current_state(TASK_INTERRUPTIBLE);
2022         add_wait_queue(&info->event_wait_q, &wait);
2023
2024         spin_unlock_irqrestore(&info->lock,flags);
2025
2026
2027         for(;;) {
2028                 schedule();
2029                 if (signal_pending(current)) {
2030                         rc = -ERESTARTSYS;
2031                         break;
2032                 }
2033
2034                 /* get current irq counts */
2035                 spin_lock_irqsave(&info->lock,flags);
2036                 cnow = info->icount;
2037                 newsigs = info->input_signal_events;
2038                 set_current_state(TASK_INTERRUPTIBLE);
2039                 spin_unlock_irqrestore(&info->lock,flags);
2040
2041                 /* if no change, wait aborted for some reason */
2042                 if (newsigs.dsr_up   == oldsigs.dsr_up   &&
2043                     newsigs.dsr_down == oldsigs.dsr_down &&
2044                     newsigs.dcd_up   == oldsigs.dcd_up   &&
2045                     newsigs.dcd_down == oldsigs.dcd_down &&
2046                     newsigs.cts_up   == oldsigs.cts_up   &&
2047                     newsigs.cts_down == oldsigs.cts_down &&
2048                     newsigs.ri_up    == oldsigs.ri_up    &&
2049                     newsigs.ri_down  == oldsigs.ri_down  &&
2050                     cnow.exithunt    == cprev.exithunt   &&
2051                     cnow.rxidle      == cprev.rxidle) {
2052                         rc = -EIO;
2053                         break;
2054                 }
2055
2056                 events = mask &
2057                         ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
2058                           (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2059                           (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
2060                           (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2061                           (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
2062                           (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2063                           (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
2064                           (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
2065                           (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
2066                           (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
2067                 if (events)
2068                         break;
2069
2070                 cprev = cnow;
2071                 oldsigs = newsigs;
2072         }
2073
2074         remove_wait_queue(&info->event_wait_q, &wait);
2075         set_current_state(TASK_RUNNING);
2076
2077         if (mask & MgslEvent_ExitHuntMode) {
2078                 spin_lock_irqsave(&info->lock,flags);
2079                 if (!waitqueue_active(&info->event_wait_q))
2080                         irq_disable(info, CHA, IRQ_EXITHUNT);
2081                 spin_unlock_irqrestore(&info->lock,flags);
2082         }
2083 exit:
2084         if (rc == 0)
2085                 PUT_USER(rc, events, mask_ptr);
2086         return rc;
2087 }
2088
2089 static int modem_input_wait(MGSLPC_INFO *info,int arg)
2090 {
2091         unsigned long flags;
2092         int rc;
2093         struct mgsl_icount cprev, cnow;
2094         DECLARE_WAITQUEUE(wait, current);
2095
2096         /* save current irq counts */
2097         spin_lock_irqsave(&info->lock,flags);
2098         cprev = info->icount;
2099         add_wait_queue(&info->status_event_wait_q, &wait);
2100         set_current_state(TASK_INTERRUPTIBLE);
2101         spin_unlock_irqrestore(&info->lock,flags);
2102
2103         for(;;) {
2104                 schedule();
2105                 if (signal_pending(current)) {
2106                         rc = -ERESTARTSYS;
2107                         break;
2108                 }
2109
2110                 /* get new irq counts */
2111                 spin_lock_irqsave(&info->lock,flags);
2112                 cnow = info->icount;
2113                 set_current_state(TASK_INTERRUPTIBLE);
2114                 spin_unlock_irqrestore(&info->lock,flags);
2115
2116                 /* if no change, wait aborted for some reason */
2117                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2118                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2119                         rc = -EIO;
2120                         break;
2121                 }
2122
2123                 /* check for change in caller specified modem input */
2124                 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2125                     (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2126                     (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
2127                     (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2128                         rc = 0;
2129                         break;
2130                 }
2131
2132                 cprev = cnow;
2133         }
2134         remove_wait_queue(&info->status_event_wait_q, &wait);
2135         set_current_state(TASK_RUNNING);
2136         return rc;
2137 }
2138
2139 /* return the state of the serial control and status signals
2140  */
2141 static int tiocmget(struct tty_struct *tty, struct file *file)
2142 {
2143         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2144         unsigned int result;
2145         unsigned long flags;
2146
2147         spin_lock_irqsave(&info->lock,flags);
2148         get_signals(info);
2149         spin_unlock_irqrestore(&info->lock,flags);
2150
2151         result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2152                 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2153                 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2154                 ((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
2155                 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2156                 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2157
2158         if (debug_level >= DEBUG_LEVEL_INFO)
2159                 printk("%s(%d):%s tiocmget() value=%08X\n",
2160                          __FILE__,__LINE__, info->device_name, result );
2161         return result;
2162 }
2163
2164 /* set modem control signals (DTR/RTS)
2165  */
2166 static int tiocmset(struct tty_struct *tty, struct file *file,
2167                     unsigned int set, unsigned int clear)
2168 {
2169         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2170         unsigned long flags;
2171
2172         if (debug_level >= DEBUG_LEVEL_INFO)
2173                 printk("%s(%d):%s tiocmset(%x,%x)\n",
2174                         __FILE__,__LINE__,info->device_name, set, clear);
2175
2176         if (set & TIOCM_RTS)
2177                 info->serial_signals |= SerialSignal_RTS;
2178         if (set & TIOCM_DTR)
2179                 info->serial_signals |= SerialSignal_DTR;
2180         if (clear & TIOCM_RTS)
2181                 info->serial_signals &= ~SerialSignal_RTS;
2182         if (clear & TIOCM_DTR)
2183                 info->serial_signals &= ~SerialSignal_DTR;
2184
2185         spin_lock_irqsave(&info->lock,flags);
2186         set_signals(info);
2187         spin_unlock_irqrestore(&info->lock,flags);
2188
2189         return 0;
2190 }
2191
2192 /* Set or clear transmit break condition
2193  *
2194  * Arguments:           tty             pointer to tty instance data
2195  *                      break_state     -1=set break condition, 0=clear
2196  */
2197 static int mgslpc_break(struct tty_struct *tty, int break_state)
2198 {
2199         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2200         unsigned long flags;
2201
2202         if (debug_level >= DEBUG_LEVEL_INFO)
2203                 printk("%s(%d):mgslpc_break(%s,%d)\n",
2204                          __FILE__,__LINE__, info->device_name, break_state);
2205
2206         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
2207                 return -EINVAL;
2208
2209         spin_lock_irqsave(&info->lock,flags);
2210         if (break_state == -1)
2211                 set_reg_bits(info, CHA+DAFO, BIT6);
2212         else
2213                 clear_reg_bits(info, CHA+DAFO, BIT6);
2214         spin_unlock_irqrestore(&info->lock,flags);
2215         return 0;
2216 }
2217
2218 static int mgslpc_get_icount(struct tty_struct *tty,
2219                                 struct serial_icounter_struct *icount)
2220 {
2221         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2222         struct mgsl_icount cnow;        /* kernel counter temps */
2223         unsigned long flags;
2224
2225         spin_lock_irqsave(&info->lock,flags);
2226         cnow = info->icount;
2227         spin_unlock_irqrestore(&info->lock,flags);
2228
2229         icount->cts = cnow.cts;
2230         icount->dsr = cnow.dsr;
2231         icount->rng = cnow.rng;
2232         icount->dcd = cnow.dcd;
2233         icount->rx = cnow.rx;
2234         icount->tx = cnow.tx;
2235         icount->frame = cnow.frame;
2236         icount->overrun = cnow.overrun;
2237         icount->parity = cnow.parity;
2238         icount->brk = cnow.brk;
2239         icount->buf_overrun = cnow.buf_overrun;
2240
2241         return 0;
2242 }
2243
2244 /* Service an IOCTL request
2245  *
2246  * Arguments:
2247  *
2248  *      tty     pointer to tty instance data
2249  *      file    pointer to associated file object for device
2250  *      cmd     IOCTL command code
2251  *      arg     command argument/context
2252  *
2253  * Return Value:        0 if success, otherwise error code
2254  */
2255 static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
2256                         unsigned int cmd, unsigned long arg)
2257 {
2258         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2259         void __user *argp = (void __user *)arg;
2260
2261         if (debug_level >= DEBUG_LEVEL_INFO)
2262                 printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2263                         info->device_name, cmd );
2264
2265         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
2266                 return -ENODEV;
2267
2268         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2269             (cmd != TIOCMIWAIT)) {
2270                 if (tty->flags & (1 << TTY_IO_ERROR))
2271                     return -EIO;
2272         }
2273
2274         switch (cmd) {
2275         case MGSL_IOCGPARAMS:
2276                 return get_params(info, argp);
2277         case MGSL_IOCSPARAMS:
2278                 return set_params(info, argp, tty);
2279         case MGSL_IOCGTXIDLE:
2280                 return get_txidle(info, argp);
2281         case MGSL_IOCSTXIDLE:
2282                 return set_txidle(info, (int)arg);
2283         case MGSL_IOCGIF:
2284                 return get_interface(info, argp);
2285         case MGSL_IOCSIF:
2286                 return set_interface(info,(int)arg);
2287         case MGSL_IOCTXENABLE:
2288                 return set_txenable(info,(int)arg, tty);
2289         case MGSL_IOCRXENABLE:
2290                 return set_rxenable(info,(int)arg);
2291         case MGSL_IOCTXABORT:
2292                 return tx_abort(info);
2293         case MGSL_IOCGSTATS:
2294                 return get_stats(info, argp);
2295         case MGSL_IOCWAITEVENT:
2296                 return wait_events(info, argp);
2297         case TIOCMIWAIT:
2298                 return modem_input_wait(info,(int)arg);
2299         default:
2300                 return -ENOIOCTLCMD;
2301         }
2302         return 0;
2303 }
2304
2305 /* Set new termios settings
2306  *
2307  * Arguments:
2308  *
2309  *      tty             pointer to tty structure
2310  *      termios         pointer to buffer to hold returned old termios
2311  */
2312 static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
2313 {
2314         MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2315         unsigned long flags;
2316
2317         if (debug_level >= DEBUG_LEVEL_INFO)
2318                 printk("%s(%d):mgslpc_set_termios %s\n", __FILE__,__LINE__,
2319                         tty->driver->name );
2320
2321         /* just return if nothing has changed */
2322         if ((tty->termios->c_cflag == old_termios->c_cflag)
2323             && (RELEVANT_IFLAG(tty->termios->c_iflag)
2324                 == RELEVANT_IFLAG(old_termios->c_iflag)))
2325           return;
2326
2327         mgslpc_change_params(info, tty);
2328
2329         /* Handle transition to B0 status */
2330         if (old_termios->c_cflag & CBAUD &&
2331             !(tty->termios->c_cflag & CBAUD)) {
2332                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2333                 spin_lock_irqsave(&info->lock,flags);
2334                 set_signals(info);
2335                 spin_unlock_irqrestore(&info->lock,flags);
2336         }
2337
2338         /* Handle transition away from B0 status */
2339         if (!(old_termios->c_cflag & CBAUD) &&
2340             tty->termios->c_cflag & CBAUD) {
2341                 info->serial_signals |= SerialSignal_DTR;
2342                 if (!(tty->termios->c_cflag & CRTSCTS) ||
2343                     !test_bit(TTY_THROTTLED, &tty->flags)) {
2344                         info->serial_signals |= SerialSignal_RTS;
2345                 }
2346                 spin_lock_irqsave(&info->lock,flags);
2347                 set_signals(info);
2348                 spin_unlock_irqrestore(&info->lock,flags);
2349         }
2350
2351         /* Handle turning off CRTSCTS */
2352         if (old_termios->c_cflag & CRTSCTS &&
2353             !(tty->termios->c_cflag & CRTSCTS)) {
2354                 tty->hw_stopped = 0;
2355                 tx_release(tty);
2356         }
2357 }
2358
2359 static void mgslpc_close(struct tty_struct *tty, struct file * filp)
2360 {
2361         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2362         struct tty_port *port = &info->port;
2363
2364         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
2365                 return;
2366
2367         if (debug_level >= DEBUG_LEVEL_INFO)
2368                 printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
2369                          __FILE__,__LINE__, info->device_name, port->count);
2370
2371         WARN_ON(!port->count);
2372
2373         if (tty_port_close_start(port, tty, filp) == 0)
2374                 goto cleanup;
2375
2376         if (port->flags & ASYNC_INITIALIZED)
2377                 mgslpc_wait_until_sent(tty, info->timeout);
2378
2379         mgslpc_flush_buffer(tty);
2380
2381         tty_ldisc_flush(tty);
2382         shutdown(info, tty);
2383         
2384         tty_port_close_end(port, tty);
2385         tty_port_tty_set(port, NULL);
2386 cleanup:
2387         if (debug_level >= DEBUG_LEVEL_INFO)
2388                 printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__,
2389                         tty->driver->name, port->count);
2390 }
2391
2392 /* Wait until the transmitter is empty.
2393  */
2394 static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
2395 {
2396         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2397         unsigned long orig_jiffies, char_time;
2398
2399         if (!info )
2400                 return;
2401
2402         if (debug_level >= DEBUG_LEVEL_INFO)
2403                 printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
2404                          __FILE__,__LINE__, info->device_name );
2405
2406         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
2407                 return;
2408
2409         if (!(info->port.flags & ASYNC_INITIALIZED))
2410                 goto exit;
2411
2412         orig_jiffies = jiffies;
2413
2414         /* Set check interval to 1/5 of estimated time to
2415          * send a character, and make it at least 1. The check
2416          * interval should also be less than the timeout.
2417          * Note: use tight timings here to satisfy the NIST-PCTS.
2418          */
2419
2420         if ( info->params.data_rate ) {
2421                 char_time = info->timeout/(32 * 5);
2422                 if (!char_time)
2423                         char_time++;
2424         } else
2425                 char_time = 1;
2426
2427         if (timeout)
2428                 char_time = min_t(unsigned long, char_time, timeout);
2429
2430         if (info->params.mode == MGSL_MODE_HDLC) {
2431                 while (info->tx_active) {
2432                         msleep_interruptible(jiffies_to_msecs(char_time));
2433                         if (signal_pending(current))
2434                                 break;
2435                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
2436                                 break;
2437                 }
2438         } else {
2439                 while ((info->tx_count || info->tx_active) &&
2440                         info->tx_enabled) {
2441                         msleep_interruptible(jiffies_to_msecs(char_time));
2442                         if (signal_pending(current))
2443                                 break;
2444                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
2445                                 break;
2446                 }
2447         }
2448
2449 exit:
2450         if (debug_level >= DEBUG_LEVEL_INFO)
2451                 printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
2452                          __FILE__,__LINE__, info->device_name );
2453 }
2454
2455 /* Called by tty_hangup() when a hangup is signaled.
2456  * This is the same as closing all open files for the port.
2457  */
2458 static void mgslpc_hangup(struct tty_struct *tty)
2459 {
2460         MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2461
2462         if (debug_level >= DEBUG_LEVEL_INFO)
2463                 printk("%s(%d):mgslpc_hangup(%s)\n",
2464                          __FILE__,__LINE__, info->device_name );
2465
2466         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
2467                 return;
2468
2469         mgslpc_flush_buffer(tty);
2470         shutdown(info, tty);
2471         tty_port_hangup(&info->port);
2472 }
2473
2474 static int carrier_raised(struct tty_port *port)
2475 {
2476         MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
2477         unsigned long flags;
2478
2479         spin_lock_irqsave(&info->lock,flags);
2480         get_signals(info);
2481         spin_unlock_irqrestore(&info->lock,flags);
2482
2483         if (info->serial_signals & SerialSignal_DCD)
2484                 return 1;
2485         return 0;
2486 }
2487
2488 static void dtr_rts(struct tty_port *port, int onoff)
2489 {
2490         MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
2491         unsigned long flags;
2492
2493         spin_lock_irqsave(&info->lock,flags);
2494         if (onoff)
2495                 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2496         else
2497                 info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR;
2498         set_signals(info);
2499         spin_unlock_irqrestore(&info->lock,flags);
2500 }
2501
2502
2503 static int mgslpc_open(struct tty_struct *tty, struct file * filp)
2504 {
2505         MGSLPC_INFO     *info;
2506         struct tty_port *port;
2507         int                     retval, line;
2508         unsigned long flags;
2509
2510         /* verify range of specified line number */
2511         line = tty->index;
2512         if ((line < 0) || (line >= mgslpc_device_count)) {
2513                 printk("%s(%d):mgslpc_open with invalid line #%d.\n",
2514                         __FILE__,__LINE__,line);
2515                 return -ENODEV;
2516         }
2517
2518         /* find the info structure for the specified line */
2519         info = mgslpc_device_list;
2520         while(info && info->line != line)
2521                 info = info->next_device;
2522         if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
2523                 return -ENODEV;
2524
2525         port = &info->port;
2526         tty->driver_data = info;
2527         tty_port_tty_set(port, tty);
2528
2529         if (debug_level >= DEBUG_LEVEL_INFO)
2530                 printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
2531                          __FILE__,__LINE__,tty->driver->name, port->count);
2532
2533         /* If port is closing, signal caller to try again */
2534         if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING){
2535                 if (port->flags & ASYNC_CLOSING)
2536                         interruptible_sleep_on(&port->close_wait);
2537                 retval = ((port->flags & ASYNC_HUP_NOTIFY) ?
2538                         -EAGAIN : -ERESTARTSYS);
2539                 goto cleanup;
2540         }
2541
2542         tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
2543
2544         spin_lock_irqsave(&info->netlock, flags);
2545         if (info->netcount) {
2546                 retval = -EBUSY;
2547                 spin_unlock_irqrestore(&info->netlock, flags);
2548                 goto cleanup;
2549         }
2550         spin_lock(&port->lock);
2551         port->count++;
2552         spin_unlock(&port->lock);
2553         spin_unlock_irqrestore(&info->netlock, flags);
2554
2555         if (port->count == 1) {
2556                 /* 1st open on this device, init hardware */
2557                 retval = startup(info, tty);
2558                 if (retval < 0)
2559                         goto cleanup;
2560         }
2561
2562         retval = tty_port_block_til_ready(&info->port, tty, filp);
2563         if (retval) {
2564                 if (debug_level >= DEBUG_LEVEL_INFO)
2565                         printk("%s(%d):block_til_ready(%s) returned %d\n",
2566                                  __FILE__,__LINE__, info->device_name, retval);
2567                 goto cleanup;
2568         }
2569
2570         if (debug_level >= DEBUG_LEVEL_INFO)
2571                 printk("%s(%d):mgslpc_open(%s) success\n",
2572                          __FILE__,__LINE__, info->device_name);
2573         retval = 0;
2574
2575 cleanup:
2576         return retval;
2577 }
2578
2579 /*
2580  * /proc fs routines....
2581  */
2582
2583 static inline void line_info(struct seq_file *m, MGSLPC_INFO *info)
2584 {
2585         char    stat_buf[30];
2586         unsigned long flags;
2587
2588         seq_printf(m, "%s:io:%04X irq:%d",
2589                       info->device_name, info->io_base, info->irq_level);
2590
2591         /* output current serial signal states */
2592         spin_lock_irqsave(&info->lock,flags);
2593         get_signals(info);
2594         spin_unlock_irqrestore(&info->lock,flags);
2595
2596         stat_buf[0] = 0;
2597         stat_buf[1] = 0;
2598         if (info->serial_signals & SerialSignal_RTS)
2599                 strcat(stat_buf, "|RTS");
2600         if (info->serial_signals & SerialSignal_CTS)
2601                 strcat(stat_buf, "|CTS");
2602         if (info->serial_signals & SerialSignal_DTR)
2603                 strcat(stat_buf, "|DTR");
2604         if (info->serial_signals & SerialSignal_DSR)
2605                 strcat(stat_buf, "|DSR");
2606         if (info->serial_signals & SerialSignal_DCD)
2607                 strcat(stat_buf, "|CD");
2608         if (info->serial_signals & SerialSignal_RI)
2609                 strcat(stat_buf, "|RI");
2610
2611         if (info->params.mode == MGSL_MODE_HDLC) {
2612                 seq_printf(m, " HDLC txok:%d rxok:%d",
2613                               info->icount.txok, info->icount.rxok);
2614                 if (info->icount.txunder)
2615                         seq_printf(m, " txunder:%d", info->icount.txunder);
2616                 if (info->icount.txabort)
2617                         seq_printf(m, " txabort:%d", info->icount.txabort);
2618                 if (info->icount.rxshort)
2619                         seq_printf(m, " rxshort:%d", info->icount.rxshort);
2620                 if (info->icount.rxlong)
2621                         seq_printf(m, " rxlong:%d", info->icount.rxlong);
2622                 if (info->icount.rxover)
2623                         seq_printf(m, " rxover:%d", info->icount.rxover);
2624                 if (info->icount.rxcrc)
2625                         seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
2626         } else {
2627                 seq_printf(m, " ASYNC tx:%d rx:%d",
2628                               info->icount.tx, info->icount.rx);
2629                 if (info->icount.frame)
2630                         seq_printf(m, " fe:%d", info->icount.frame);
2631                 if (info->icount.parity)
2632                         seq_printf(m, " pe:%d", info->icount.parity);
2633                 if (info->icount.brk)
2634                         seq_printf(m, " brk:%d", info->icount.brk);
2635                 if (info->icount.overrun)
2636                         seq_printf(m, " oe:%d", info->icount.overrun);
2637         }
2638
2639         /* Append serial signal status to end */
2640         seq_printf(m, " %s\n", stat_buf+1);
2641
2642         seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
2643                        info->tx_active,info->bh_requested,info->bh_running,
2644                        info->pending_bh);
2645 }
2646
2647 /* Called to print information about devices
2648  */
2649 static int mgslpc_proc_show(struct seq_file *m, void *v)
2650 {
2651         MGSLPC_INFO *info;
2652
2653         seq_printf(m, "synclink driver:%s\n", driver_version);
2654
2655         info = mgslpc_device_list;
2656         while( info ) {
2657                 line_info(m, info);
2658                 info = info->next_device;
2659         }
2660         return 0;
2661 }
2662
2663 static int mgslpc_proc_open(struct inode *inode, struct file *file)
2664 {
2665         return single_open(file, mgslpc_proc_show, NULL);
2666 }
2667
2668 static const struct file_operations mgslpc_proc_fops = {
2669         .owner          = THIS_MODULE,
2670         .open           = mgslpc_proc_open,
2671         .read           = seq_read,
2672         .llseek         = seq_lseek,
2673         .release        = single_release,
2674 };
2675
2676 static int rx_alloc_buffers(MGSLPC_INFO *info)
2677 {
2678         /* each buffer has header and data */
2679         info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
2680
2681         /* calculate total allocation size for 8 buffers */
2682         info->rx_buf_total_size = info->rx_buf_size * 8;
2683
2684         /* limit total allocated memory */
2685         if (info->rx_buf_total_size > 0x10000)
2686                 info->rx_buf_total_size = 0x10000;
2687
2688         /* calculate number of buffers */
2689         info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
2690
2691         info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
2692         if (info->rx_buf == NULL)
2693                 return -ENOMEM;
2694
2695         rx_reset_buffers(info);
2696         return 0;
2697 }
2698
2699 static void rx_free_buffers(MGSLPC_INFO *info)
2700 {
2701         kfree(info->rx_buf);
2702         info->rx_buf = NULL;
2703 }
2704
2705 static int claim_resources(MGSLPC_INFO *info)
2706 {
2707         if (rx_alloc_buffers(info) < 0 ) {
2708                 printk( "Cant allocate rx buffer %s\n", info->device_name);
2709                 release_resources(info);
2710                 return -ENODEV;
2711         }
2712         return 0;
2713 }
2714
2715 static void release_resources(MGSLPC_INFO *info)
2716 {
2717         if (debug_level >= DEBUG_LEVEL_INFO)
2718                 printk("release_resources(%s)\n", info->device_name);
2719         rx_free_buffers(info);
2720 }
2721
2722 /* Add the specified device instance data structure to the
2723  * global linked list of devices and increment the device count.
2724  *
2725  * Arguments:           info    pointer to device instance data
2726  */
2727 static void mgslpc_add_device(MGSLPC_INFO *info)
2728 {
2729         info->next_device = NULL;
2730         info->line = mgslpc_device_count;
2731         sprintf(info->device_name,"ttySLP%d",info->line);
2732
2733         if (info->line < MAX_DEVICE_COUNT) {
2734                 if (maxframe[info->line])
2735                         info->max_frame_size = maxframe[info->line];
2736         }
2737
2738         mgslpc_device_count++;
2739
2740         if (!mgslpc_device_list)
2741                 mgslpc_device_list = info;
2742         else {
2743                 MGSLPC_INFO *current_dev = mgslpc_device_list;
2744                 while( current_dev->next_device )
2745                         current_dev = current_dev->next_device;
2746                 current_dev->next_device = info;
2747         }
2748
2749         if (info->max_frame_size < 4096)
2750                 info->max_frame_size = 4096;
2751         else if (info->max_frame_size > 65535)
2752                 info->max_frame_size = 65535;
2753
2754         printk( "SyncLink PC Card %s:IO=%04X IRQ=%d\n",
2755                 info->device_name, info->io_base, info->irq_level);
2756
2757 #if SYNCLINK_GENERIC_HDLC
2758         hdlcdev_init(info);
2759 #endif
2760 }
2761
2762 static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
2763 {
2764         MGSLPC_INFO *info = mgslpc_device_list;
2765         MGSLPC_INFO *last = NULL;
2766
2767         while(info) {
2768                 if (info == remove_info) {
2769                         if (last)
2770                                 last->next_device = info->next_device;
2771                         else
2772                                 mgslpc_device_list = info->next_device;
2773 #if SYNCLINK_GENERIC_HDLC
2774                         hdlcdev_exit(info);
2775 #endif
2776                         release_resources(info);
2777                         kfree(info);
2778                         mgslpc_device_count--;
2779                         return;
2780                 }
2781                 last = info;
2782                 info = info->next_device;
2783         }
2784 }
2785
2786 static struct pcmcia_device_id mgslpc_ids[] = {
2787         PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
2788         PCMCIA_DEVICE_NULL
2789 };
2790 MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
2791
2792 static struct pcmcia_driver mgslpc_driver = {
2793         .owner          = THIS_MODULE,
2794         .drv            = {
2795                 .name   = "synclink_cs",
2796         },
2797         .probe          = mgslpc_probe,
2798         .remove         = mgslpc_detach,
2799         .id_table       = mgslpc_ids,
2800         .suspend        = mgslpc_suspend,
2801         .resume         = mgslpc_resume,
2802 };
2803
2804 static const struct tty_operations mgslpc_ops = {
2805         .open = mgslpc_open,
2806         .close = mgslpc_close,
2807         .write = mgslpc_write,
2808         .put_char = mgslpc_put_char,
2809         .flush_chars = mgslpc_flush_chars,
2810         .write_room = mgslpc_write_room,
2811         .chars_in_buffer = mgslpc_chars_in_buffer,
2812         .flush_buffer = mgslpc_flush_buffer,
2813         .ioctl = mgslpc_ioctl,
2814         .throttle = mgslpc_throttle,
2815         .unthrottle = mgslpc_unthrottle,
2816         .send_xchar = mgslpc_send_xchar,
2817         .break_ctl = mgslpc_break,
2818         .wait_until_sent = mgslpc_wait_until_sent,
2819         .set_termios = mgslpc_set_termios,
2820         .stop = tx_pause,
2821         .start = tx_release,
2822         .hangup = mgslpc_hangup,
2823         .tiocmget = tiocmget,
2824         .tiocmset = tiocmset,
2825         .proc_fops = &mgslpc_proc_fops,
2826 };
2827
2828 static void synclink_cs_cleanup(void)
2829 {
2830         int rc;
2831
2832         printk("Unloading %s: version %s\n", driver_name, driver_version);
2833
2834         while(mgslpc_device_list)
2835                 mgslpc_remove_device(mgslpc_device_list);
2836
2837         if (serial_driver) {
2838                 if ((rc = tty_unregister_driver(serial_driver)))
2839                         printk("%s(%d) failed to unregister tty driver err=%d\n",
2840                                __FILE__,__LINE__,rc);
2841                 put_tty_driver(serial_driver);
2842         }
2843
2844         pcmcia_unregister_driver(&mgslpc_driver);
2845 }
2846
2847 static int __init synclink_cs_init(void)
2848 {
2849     int rc;
2850
2851     if (break_on_load) {
2852             mgslpc_get_text_ptr();
2853             BREAKPOINT();
2854     }
2855
2856     printk("%s %s\n", driver_name, driver_version);
2857
2858     if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
2859             return rc;
2860
2861     serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT);
2862     if (!serial_driver) {
2863             rc = -ENOMEM;
2864             goto error;
2865     }
2866
2867     /* Initialize the tty_driver structure */
2868
2869     serial_driver->owner = THIS_MODULE;
2870     serial_driver->driver_name = "synclink_cs";
2871     serial_driver->name = "ttySLP";
2872     serial_driver->major = ttymajor;
2873     serial_driver->minor_start = 64;
2874     serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
2875     serial_driver->subtype = SERIAL_TYPE_NORMAL;
2876     serial_driver->init_termios = tty_std_termios;
2877     serial_driver->init_termios.c_cflag =
2878             B9600 | CS8 | CREAD | HUPCL | CLOCAL;
2879     serial_driver->flags = TTY_DRIVER_REAL_RAW;
2880     tty_set_operations(serial_driver, &mgslpc_ops);
2881
2882     if ((rc = tty_register_driver(serial_driver)) < 0) {
2883             printk("%s(%d):Couldn't register serial driver\n",
2884                    __FILE__,__LINE__);
2885             put_tty_driver(serial_driver);
2886             serial_driver = NULL;
2887             goto error;
2888     }
2889
2890     printk("%s %s, tty major#%d\n",
2891            driver_name, driver_version,
2892            serial_driver->major);
2893
2894     return 0;
2895
2896 error:
2897     synclink_cs_cleanup();
2898     return rc;
2899 }
2900
2901 static void __exit synclink_cs_exit(void)
2902 {
2903         synclink_cs_cleanup();
2904 }
2905
2906 module_init(synclink_cs_init);
2907 module_exit(synclink_cs_exit);
2908
2909 static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
2910 {
2911         unsigned int M, N;
2912         unsigned char val;
2913
2914         /* note:standard BRG mode is broken in V3.2 chip
2915          * so enhanced mode is always used
2916          */
2917
2918         if (rate) {
2919                 N = 3686400 / rate;
2920                 if (!N)
2921                         N = 1;
2922                 N >>= 1;
2923                 for (M = 1; N > 64 && M < 16; M++)
2924                         N >>= 1;
2925                 N--;
2926
2927                 /* BGR[5..0] = N
2928                  * BGR[9..6] = M
2929                  * BGR[7..0] contained in BGR register
2930                  * BGR[9..8] contained in CCR2[7..6]
2931                  * divisor = (N+1)*2^M
2932                  *
2933                  * Note: M *must* not be zero (causes asymetric duty cycle)
2934                  */
2935                 write_reg(info, (unsigned char) (channel + BGR),
2936                                   (unsigned char) ((M << 6) + N));
2937                 val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
2938                 val |= ((M << 4) & 0xc0);
2939                 write_reg(info, (unsigned char) (channel + CCR2), val);
2940         }
2941 }
2942
2943 /* Enabled the AUX clock output at the specified frequency.
2944  */
2945 static void enable_auxclk(MGSLPC_INFO *info)
2946 {
2947         unsigned char val;
2948
2949         /* MODE
2950          *
2951          * 07..06  MDS[1..0] 10 = transparent HDLC mode
2952          * 05      ADM Address Mode, 0 = no addr recognition
2953          * 04      TMD Timer Mode, 0 = external
2954          * 03      RAC Receiver Active, 0 = inactive
2955          * 02      RTS 0=RTS active during xmit, 1=RTS always active
2956          * 01      TRS Timer Resolution, 1=512
2957          * 00      TLP Test Loop, 0 = no loop
2958          *
2959          * 1000 0010
2960          */
2961         val = 0x82;
2962
2963         /* channel B RTS is used to enable AUXCLK driver on SP505 */
2964         if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
2965                 val |= BIT2;
2966         write_reg(info, CHB + MODE, val);
2967
2968         /* CCR0
2969          *
2970          * 07      PU Power Up, 1=active, 0=power down
2971          * 06      MCE Master Clock Enable, 1=enabled
2972          * 05      Reserved, 0
2973          * 04..02  SC[2..0] Encoding
2974          * 01..00  SM[1..0] Serial Mode, 00=HDLC
2975          *
2976          * 11000000
2977          */
2978         write_reg(info, CHB + CCR0, 0xc0);
2979
2980         /* CCR1
2981          *
2982          * 07      SFLG Shared Flag, 0 = disable shared flags
2983          * 06      GALP Go Active On Loop, 0 = not used
2984          * 05      GLP Go On Loop, 0 = not used
2985          * 04      ODS Output Driver Select, 1=TxD is push-pull output
2986          * 03      ITF Interframe Time Fill, 0=mark, 1=flag
2987          * 02..00  CM[2..0] Clock Mode
2988          *
2989          * 0001 0111
2990          */
2991         write_reg(info, CHB + CCR1, 0x17);
2992
2993         /* CCR2 (Channel B)
2994          *
2995          * 07..06  BGR[9..8] Baud rate bits 9..8
2996          * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
2997          * 04      SSEL Clock source select, 1=submode b
2998          * 03      TOE 0=TxCLK is input, 1=TxCLK is output
2999          * 02      RWX Read/Write Exchange 0=disabled
3000          * 01      C32, CRC select, 0=CRC-16, 1=CRC-32
3001          * 00      DIV, data inversion 0=disabled, 1=enabled
3002          *
3003          * 0011 1000
3004          */
3005         if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3006                 write_reg(info, CHB + CCR2, 0x38);
3007         else
3008                 write_reg(info, CHB + CCR2, 0x30);
3009
3010         /* CCR4
3011          *
3012          * 07      MCK4 Master Clock Divide by 4, 1=enabled
3013          * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3014          * 05      TST1 Test Pin, 0=normal operation
3015          * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
3016          * 03..02  Reserved, must be 0
3017          * 01..00  RFT[1..0] RxFIFO Threshold 00=32 bytes
3018          *
3019          * 0101 0000
3020          */
3021         write_reg(info, CHB + CCR4, 0x50);
3022
3023         /* if auxclk not enabled, set internal BRG so
3024          * CTS transitions can be detected (requires TxC)
3025          */
3026         if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3027                 mgslpc_set_rate(info, CHB, info->params.clock_speed);
3028         else
3029                 mgslpc_set_rate(info, CHB, 921600);
3030 }
3031
3032 static void loopback_enable(MGSLPC_INFO *info)
3033 {
3034         unsigned char val;
3035
3036         /* CCR1:02..00  CM[2..0] Clock Mode = 111 (clock mode 7) */
3037         val = read_reg(info, CHA + CCR1) | (BIT2 + BIT1 + BIT0);
3038         write_reg(info, CHA + CCR1, val);
3039
3040         /* CCR2:04 SSEL Clock source select, 1=submode b */
3041         val = read_reg(info, CHA + CCR2) | (BIT4 + BIT5);
3042         write_reg(info, CHA + CCR2, val);
3043
3044         /* set LinkSpeed if available, otherwise default to 2Mbps */
3045         if (info->params.clock_speed)
3046                 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3047         else
3048                 mgslpc_set_rate(info, CHA, 1843200);
3049
3050         /* MODE:00 TLP Test Loop, 1=loopback enabled */
3051         val = read_reg(info, CHA + MODE) | BIT0;
3052         write_reg(info, CHA + MODE, val);
3053 }
3054
3055 static void hdlc_mode(MGSLPC_INFO *info)
3056 {
3057         unsigned char val;
3058         unsigned char clkmode, clksubmode;
3059
3060         /* disable all interrupts */
3061         irq_disable(info, CHA, 0xffff);
3062         irq_disable(info, CHB, 0xffff);
3063         port_irq_disable(info, 0xff);
3064
3065         /* assume clock mode 0a, rcv=RxC xmt=TxC */
3066         clkmode = clksubmode = 0;
3067         if (info->params.flags & HDLC_FLAG_RXC_DPLL
3068             && info->params.flags & HDLC_FLAG_TXC_DPLL) {
3069                 /* clock mode 7a, rcv = DPLL, xmt = DPLL */
3070                 clkmode = 7;
3071         } else if (info->params.flags & HDLC_FLAG_RXC_BRG
3072                  && info->params.flags & HDLC_FLAG_TXC_BRG) {
3073                 /* clock mode 7b, rcv = BRG, xmt = BRG */
3074                 clkmode = 7;
3075                 clksubmode = 1;
3076         } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
3077                 if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3078                         /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
3079                         clkmode = 6;
3080                         clksubmode = 1;
3081                 } else {
3082                         /* clock mode 6a, rcv = DPLL, xmt = TxC */
3083                         clkmode = 6;
3084                 }
3085         } else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3086                 /* clock mode 0b, rcv = RxC, xmt = BRG */
3087                 clksubmode = 1;
3088         }
3089
3090         /* MODE
3091          *
3092          * 07..06  MDS[1..0] 10 = transparent HDLC mode
3093          * 05      ADM Address Mode, 0 = no addr recognition
3094          * 04      TMD Timer Mode, 0 = external
3095          * 03      RAC Receiver Active, 0 = inactive
3096          * 02      RTS 0=RTS active during xmit, 1=RTS always active
3097          * 01      TRS Timer Resolution, 1=512
3098          * 00      TLP Test Loop, 0 = no loop
3099          *
3100          * 1000 0010
3101          */
3102         val = 0x82;
3103         if (info->params.loopback)
3104                 val |= BIT0;
3105
3106         /* preserve RTS state */
3107         if (info->serial_signals & SerialSignal_RTS)
3108                 val |= BIT2;
3109         write_reg(info, CHA + MODE, val);
3110
3111         /* CCR0
3112          *
3113          * 07      PU Power Up, 1=active, 0=power down
3114          * 06      MCE Master Clock Enable, 1=enabled
3115          * 05      Reserved, 0
3116          * 04..02  SC[2..0] Encoding
3117          * 01..00  SM[1..0] Serial Mode, 00=HDLC
3118          *
3119          * 11000000
3120          */
3121         val = 0xc0;
3122         switch (info->params.encoding)
3123         {
3124         case HDLC_ENCODING_NRZI:
3125                 val |= BIT3;
3126                 break;
3127         case HDLC_ENCODING_BIPHASE_SPACE:
3128                 val |= BIT4;
3129                 break;          // FM0
3130         case HDLC_ENCODING_BIPHASE_MARK:
3131                 val |= BIT4 + BIT2;
3132                 break;          // FM1
3133         case HDLC_ENCODING_BIPHASE_LEVEL:
3134                 val |= BIT4 + BIT3;
3135                 break;          // Manchester
3136         }
3137         write_reg(info, CHA + CCR0, val);
3138
3139         /* CCR1
3140          *
3141          * 07      SFLG Shared Flag, 0 = disable shared flags
3142          * 06      GALP Go Active On Loop, 0 = not used
3143          * 05      GLP Go On Loop, 0 = not used
3144          * 04      ODS Output Driver Select, 1=TxD is push-pull output
3145          * 03      ITF Interframe Time Fill, 0=mark, 1=flag
3146          * 02..00  CM[2..0] Clock Mode
3147          *
3148          * 0001 0000
3149          */
3150         val = 0x10 + clkmode;
3151         write_reg(info, CHA + CCR1, val);
3152
3153         /* CCR2
3154          *
3155          * 07..06  BGR[9..8] Baud rate bits 9..8
3156          * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
3157          * 04      SSEL Clock source select, 1=submode b
3158          * 03      TOE 0=TxCLK is input, 0=TxCLK is input
3159          * 02      RWX Read/Write Exchange 0=disabled
3160          * 01      C32, CRC select, 0=CRC-16, 1=CRC-32
3161          * 00      DIV, data inversion 0=disabled, 1=enabled
3162          *
3163          * 0000 0000
3164          */
3165         val = 0x00;
3166         if (clkmode == 2 || clkmode == 3 || clkmode == 6
3167             || clkmode == 7 || (clkmode == 0 && clksubmode == 1))
3168                 val |= BIT5;
3169         if (clksubmode)
3170                 val |= BIT4;
3171         if (info->params.crc_type == HDLC_CRC_32_CCITT)
3172                 val |= BIT1;
3173         if (info->params.encoding == HDLC_ENCODING_NRZB)
3174                 val |= BIT0;
3175         write_reg(info, CHA + CCR2, val);
3176
3177         /* CCR3
3178          *
3179          * 07..06  PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
3180          * 05      EPT Enable preamble transmission, 1=enabled
3181          * 04      RADD Receive address pushed to FIFO, 0=disabled
3182          * 03      CRL CRC Reset Level, 0=FFFF
3183          * 02      RCRC Rx CRC 0=On 1=Off
3184          * 01      TCRC Tx CRC 0=On 1=Off
3185          * 00      PSD DPLL Phase Shift Disable
3186          *
3187          * 0000 0000
3188          */
3189         val = 0x00;
3190         if (info->params.crc_type == HDLC_CRC_NONE)
3191                 val |= BIT2 + BIT1;
3192         if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
3193                 val |= BIT5;
3194         switch (info->params.preamble_length)
3195         {
3196         case HDLC_PREAMBLE_LENGTH_16BITS:
3197                 val |= BIT6;
3198                 break;
3199         case HDLC_PREAMBLE_LENGTH_32BITS:
3200                 val |= BIT6;
3201                 break;
3202         case HDLC_PREAMBLE_LENGTH_64BITS:
3203                 val |= BIT7 + BIT6;
3204                 break;
3205         }
3206         write_reg(info, CHA + CCR3, val);
3207
3208         /* PRE - Preamble pattern */
3209         val = 0;
3210         switch (info->params.preamble)
3211         {
3212         case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
3213         case HDLC_PREAMBLE_PATTERN_10:    val = 0xaa; break;
3214         case HDLC_PREAMBLE_PATTERN_01:    val = 0x55; break;
3215         case HDLC_PREAMBLE_PATTERN_ONES:  val = 0xff; break;
3216         }
3217         write_reg(info, CHA + PRE, val);
3218
3219         /* CCR4
3220          *
3221          * 07      MCK4 Master Clock Divide by 4, 1=enabled
3222          * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3223          * 05      TST1 Test Pin, 0=normal operation
3224          * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
3225          * 03..02  Reserved, must be 0
3226          * 01..00  RFT[1..0] RxFIFO Threshold 00=32 bytes
3227          *
3228          * 0101 0000
3229          */
3230         val = 0x50;
3231         write_reg(info, CHA + CCR4, val);
3232         if (info->params.flags & HDLC_FLAG_RXC_DPLL)
3233                 mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
3234         else
3235                 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3236
3237         /* RLCR Receive length check register
3238          *
3239          * 7     1=enable receive length check
3240          * 6..0  Max frame length = (RL + 1) * 32
3241          */
3242         write_reg(info, CHA + RLCR, 0);
3243
3244         /* XBCH Transmit Byte Count High
3245          *
3246          * 07      DMA mode, 0 = interrupt driven
3247          * 06      NRM, 0=ABM (ignored)
3248          * 05      CAS Carrier Auto Start
3249          * 04      XC Transmit Continuously (ignored)
3250          * 03..00  XBC[10..8] Transmit byte count bits 10..8
3251          *
3252          * 0000 0000
3253          */
3254         val = 0x00;
3255         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3256                 val |= BIT5;
3257         write_reg(info, CHA + XBCH, val);
3258         enable_auxclk(info);
3259         if (info->params.loopback || info->testing_irq)
3260                 loopback_enable(info);
3261         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3262         {
3263                 irq_enable(info, CHB, IRQ_CTS);
3264                 /* PVR[3] 1=AUTO CTS active */
3265                 set_reg_bits(info, CHA + PVR, BIT3);
3266         } else
3267                 clear_reg_bits(info, CHA + PVR, BIT3);
3268
3269         irq_enable(info, CHA,
3270                          IRQ_RXEOM + IRQ_RXFIFO + IRQ_ALLSENT +
3271                          IRQ_UNDERRUN + IRQ_TXFIFO);
3272         issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3273         wait_command_complete(info, CHA);
3274         read_reg16(info, CHA + ISR);    /* clear pending IRQs */
3275
3276         /* Master clock mode enabled above to allow reset commands
3277          * to complete even if no data clocks are present.
3278          *
3279          * Disable master clock mode for normal communications because
3280          * V3.2 of the ESCC2 has a bug that prevents the transmit all sent
3281          * IRQ when in master clock mode.
3282          *
3283          * Leave master clock mode enabled for IRQ test because the
3284          * timer IRQ used by the test can only happen in master clock mode.
3285          */
3286         if (!info->testing_irq)
3287                 clear_reg_bits(info, CHA + CCR0, BIT6);
3288
3289         tx_set_idle(info);
3290
3291         tx_stop(info);
3292         rx_stop(info);
3293 }
3294
3295 static void rx_stop(MGSLPC_INFO *info)
3296 {
3297         if (debug_level >= DEBUG_LEVEL_ISR)
3298                 printk("%s(%d):rx_stop(%s)\n",
3299                          __FILE__,__LINE__, info->device_name );
3300
3301         /* MODE:03 RAC Receiver Active, 0=inactive */
3302         clear_reg_bits(info, CHA + MODE, BIT3);
3303
3304         info->rx_enabled = false;
3305         info->rx_overflow = false;
3306 }
3307
3308 static void rx_start(MGSLPC_INFO *info)
3309 {
3310         if (debug_level >= DEBUG_LEVEL_ISR)
3311                 printk("%s(%d):rx_start(%s)\n",
3312                          __FILE__,__LINE__, info->device_name );
3313
3314         rx_reset_buffers(info);
3315         info->rx_enabled = false;
3316         info->rx_overflow = false;
3317
3318         /* MODE:03 RAC Receiver Active, 1=active */
3319         set_reg_bits(info, CHA + MODE, BIT3);
3320
3321         info->rx_enabled = true;
3322 }
3323
3324 static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty)
3325 {
3326         if (debug_level >= DEBUG_LEVEL_ISR)
3327                 printk("%s(%d):tx_start(%s)\n",
3328                          __FILE__,__LINE__, info->device_name );
3329
3330         if (info->tx_count) {
3331                 /* If auto RTS enabled and RTS is inactive, then assert */
3332                 /* RTS and set a flag indicating that the driver should */
3333                 /* negate RTS when the transmission completes. */
3334                 info->drop_rts_on_tx_done = false;
3335
3336                 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3337                         get_signals(info);
3338                         if (!(info->serial_signals & SerialSignal_RTS)) {
3339                                 info->serial_signals |= SerialSignal_RTS;
3340                                 set_signals(info);
3341                                 info->drop_rts_on_tx_done = true;
3342                         }
3343                 }
3344
3345                 if (info->params.mode == MGSL_MODE_ASYNC) {
3346                         if (!info->tx_active) {
3347                                 info->tx_active = true;
3348                                 tx_ready(info, tty);
3349                         }
3350                 } else {
3351                         info->tx_active = true;
3352                         tx_ready(info, tty);
3353                         mod_timer(&info->tx_timer, jiffies +
3354                                         msecs_to_jiffies(5000));
3355                 }
3356         }
3357
3358         if (!info->tx_enabled)
3359                 info->tx_enabled = true;
3360 }
3361
3362 static void tx_stop(MGSLPC_INFO *info)
3363 {
3364         if (debug_level >= DEBUG_LEVEL_ISR)
3365                 printk("%s(%d):tx_stop(%s)\n",
3366                          __FILE__,__LINE__, info->device_name );
3367
3368         del_timer(&info->tx_timer);
3369
3370         info->tx_enabled = false;
3371         info->tx_active = false;
3372 }
3373
3374 /* Reset the adapter to a known state and prepare it for further use.
3375  */
3376 static void reset_device(MGSLPC_INFO *info)
3377 {
3378         /* power up both channels (set BIT7) */
3379         write_reg(info, CHA + CCR0, 0x80);
3380         write_reg(info, CHB + CCR0, 0x80);
3381         write_reg(info, CHA + MODE, 0);
3382         write_reg(info, CHB + MODE, 0);
3383
3384         /* disable all interrupts */
3385         irq_disable(info, CHA, 0xffff);
3386         irq_disable(info, CHB, 0xffff);
3387         port_irq_disable(info, 0xff);
3388
3389         /* PCR Port Configuration Register
3390          *
3391          * 07..04  DEC[3..0] Serial I/F select outputs
3392          * 03      output, 1=AUTO CTS control enabled
3393          * 02      RI Ring Indicator input 0=active
3394          * 01      DSR input 0=active
3395          * 00      DTR output 0=active
3396          *
3397          * 0000 0110
3398          */
3399         write_reg(info, PCR, 0x06);
3400
3401         /* PVR Port Value Register
3402          *
3403          * 07..04  DEC[3..0] Serial I/F select (0000=disabled)
3404          * 03      AUTO CTS output 1=enabled
3405          * 02      RI Ring Indicator input
3406          * 01      DSR input
3407          * 00      DTR output (1=inactive)
3408          *
3409          * 0000 0001
3410          */
3411 //      write_reg(info, PVR, PVR_DTR);
3412
3413         /* IPC Interrupt Port Configuration
3414          *
3415          * 07      VIS 1=Masked interrupts visible
3416          * 06..05  Reserved, 0
3417          * 04..03  SLA Slave address, 00 ignored
3418          * 02      CASM Cascading Mode, 1=daisy chain
3419          * 01..00  IC[1..0] Interrupt Config, 01=push-pull output, active low
3420          *
3421          * 0000 0101
3422          */
3423         write_reg(info, IPC, 0x05);
3424 }
3425
3426 static void async_mode(MGSLPC_INFO *info)
3427 {
3428         unsigned char val;
3429
3430         /* disable all interrupts */
3431         irq_disable(info, CHA, 0xffff);
3432         irq_disable(info, CHB, 0xffff);
3433         port_irq_disable(info, 0xff);
3434
3435         /* MODE
3436          *
3437          * 07      Reserved, 0
3438          * 06      FRTS RTS State, 0=active
3439          * 05      FCTS Flow Control on CTS
3440          * 04      FLON Flow Control Enable
3441          * 03      RAC Receiver Active, 0 = inactive
3442          * 02      RTS 0=Auto RTS, 1=manual RTS
3443          * 01      TRS Timer Resolution, 1=512
3444          * 00      TLP Test Loop, 0 = no loop
3445          *
3446          * 0000 0110
3447          */
3448         val = 0x06;
3449         if (info->params.loopback)
3450                 val |= BIT0;
3451
3452         /* preserve RTS state */
3453         if (!(info->serial_signals & SerialSignal_RTS))
3454                 val |= BIT6;
3455         write_reg(info, CHA + MODE, val);
3456
3457         /* CCR0
3458          *
3459          * 07      PU Power Up, 1=active, 0=power down
3460          * 06      MCE Master Clock Enable, 1=enabled
3461          * 05      Reserved, 0
3462          * 04..02  SC[2..0] Encoding, 000=NRZ
3463          * 01..00  SM[1..0] Serial Mode, 11=Async
3464          *
3465          * 1000 0011
3466          */
3467         write_reg(info, CHA + CCR0, 0x83);
3468
3469         /* CCR1
3470          *
3471          * 07..05  Reserved, 0
3472          * 04      ODS Output Driver Select, 1=TxD is push-pull output
3473          * 03      BCR Bit Clock Rate, 1=16x
3474          * 02..00  CM[2..0] Clock Mode, 111=BRG
3475          *
3476          * 0001 1111
3477          */
3478         write_reg(info, CHA + CCR1, 0x1f);
3479
3480         /* CCR2 (channel A)
3481          *
3482          * 07..06  BGR[9..8] Baud rate bits 9..8
3483          * 05      BDF Baud rate divisor factor, 0=1, 1=BGR value
3484          * 04      SSEL Clock source select, 1=submode b
3485          * 03      TOE 0=TxCLK is input, 0=TxCLK is input
3486          * 02      RWX Read/Write Exchange 0=disabled
3487          * 01      Reserved, 0
3488          * 00      DIV, data inversion 0=disabled, 1=enabled
3489          *
3490          * 0001 0000
3491          */
3492         write_reg(info, CHA + CCR2, 0x10);
3493
3494         /* CCR3
3495          *
3496          * 07..01  Reserved, 0
3497          * 00      PSD DPLL Phase Shift Disable
3498          *
3499          * 0000 0000
3500          */
3501         write_reg(info, CHA + CCR3, 0);
3502
3503         /* CCR4
3504          *
3505          * 07      MCK4 Master Clock Divide by 4, 1=enabled
3506          * 06      EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3507          * 05      TST1 Test Pin, 0=normal operation
3508          * 04      ICD Ivert Carrier Detect, 1=enabled (active low)
3509          * 03..00  Reserved, must be 0
3510          *
3511          * 0101 0000
3512          */
3513         write_reg(info, CHA + CCR4, 0x50);
3514         mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
3515
3516         /* DAFO Data Format
3517          *
3518          * 07      Reserved, 0
3519          * 06      XBRK transmit break, 0=normal operation
3520          * 05      Stop bits (0=1, 1=2)
3521          * 04..03  PAR[1..0] Parity (01=odd, 10=even)
3522          * 02      PAREN Parity Enable
3523          * 01..00  CHL[1..0] Character Length (00=8, 01=7)
3524          *
3525          */
3526         val = 0x00;
3527         if (info->params.data_bits != 8)
3528                 val |= BIT0;    /* 7 bits */
3529         if (info->params.stop_bits != 1)
3530                 val |= BIT5;
3531         if (info->params.parity != ASYNC_PARITY_NONE)
3532         {
3533                 val |= BIT2;    /* Parity enable */
3534                 if (info->params.parity == ASYNC_PARITY_ODD)
3535                         val |= BIT3;
3536                 else
3537                         val |= BIT4;
3538         }
3539         write_reg(info, CHA + DAFO, val);
3540
3541         /* RFC Rx FIFO Control
3542          *
3543          * 07      Reserved, 0
3544          * 06      DPS, 1=parity bit not stored in data byte
3545          * 05      DXS, 0=all data stored in FIFO (including XON/XOFF)
3546          * 04      RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
3547          * 03..02  RFTH[1..0], rx threshold, 11=16 status + 16 data byte
3548          * 01      Reserved, 0
3549          * 00      TCDE Terminate Char Detect Enable, 0=disabled
3550          *
3551          * 0101 1100
3552          */
3553         write_reg(info, CHA + RFC, 0x5c);
3554
3555         /* RLCR Receive length check register
3556          *
3557          * Max frame length = (RL + 1) * 32
3558          */
3559         write_reg(info, CHA + RLCR, 0);
3560
3561         /* XBCH Transmit Byte Count High
3562          *
3563          * 07      DMA mode, 0 = interrupt driven
3564          * 06      NRM, 0=ABM (ignored)
3565          * 05      CAS Carrier Auto Start
3566          * 04      XC Transmit Continuously (ignored)
3567          * 03..00  XBC[10..8] Transmit byte count bits 10..8
3568          *
3569          * 0000 0000
3570          */
3571         val = 0x00;
3572         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3573                 val |= BIT5;
3574         write_reg(info, CHA + XBCH, val);
3575         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3576                 irq_enable(info, CHA, IRQ_CTS);
3577
3578         /* MODE:03 RAC Receiver Active, 1=active */
3579         set_reg_bits(info, CHA + MODE, BIT3);
3580         enable_auxclk(info);
3581         if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
3582                 irq_enable(info, CHB, IRQ_CTS);
3583                 /* PVR[3] 1=AUTO CTS active */
3584                 set_reg_bits(info, CHA + PVR, BIT3);
3585         } else
3586                 clear_reg_bits(info, CHA + PVR, BIT3);
3587         irq_enable(info, CHA,
3588                           IRQ_RXEOM + IRQ_RXFIFO + IRQ_BREAK_ON + IRQ_RXTIME +
3589                           IRQ_ALLSENT + IRQ_TXFIFO);
3590         issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3591         wait_command_complete(info, CHA);
3592         read_reg16(info, CHA + ISR);    /* clear pending IRQs */
3593 }
3594
3595 /* Set the HDLC idle mode for the transmitter.
3596  */
3597 static void tx_set_idle(MGSLPC_INFO *info)
3598 {
3599         /* Note: ESCC2 only supports flags and one idle modes */
3600         if (info->idle_mode == HDLC_TXIDLE_FLAGS)
3601                 set_reg_bits(info, CHA + CCR1, BIT3);
3602         else
3603                 clear_reg_bits(info, CHA + CCR1, BIT3);
3604 }
3605
3606 /* get state of the V24 status (input) signals.
3607  */
3608 static void get_signals(MGSLPC_INFO *info)
3609 {
3610         unsigned char status = 0;
3611
3612         /* preserve DTR and RTS */
3613         info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
3614
3615         if (read_reg(info, CHB + VSTR) & BIT7)
3616                 info->serial_signals |= SerialSignal_DCD;
3617         if (read_reg(info, CHB + STAR) & BIT1)
3618                 info->serial_signals |= SerialSignal_CTS;
3619
3620         status = read_reg(info, CHA + PVR);
3621         if (!(status & PVR_RI))
3622                 info->serial_signals |= SerialSignal_RI;
3623         if (!(status & PVR_DSR))
3624                 info->serial_signals |= SerialSignal_DSR;
3625 }
3626
3627 /* Set the state of DTR and RTS based on contents of
3628  * serial_signals member of device extension.
3629  */
3630 static void set_signals(MGSLPC_INFO *info)
3631 {
3632         unsigned char val;
3633
3634         val = read_reg(info, CHA + MODE);
3635         if (info->params.mode == MGSL_MODE_ASYNC) {
3636                 if (info->serial_signals & SerialSignal_RTS)
3637                         val &= ~BIT6;
3638                 else
3639                         val |= BIT6;
3640         } else {
3641                 if (info->serial_signals & SerialSignal_RTS)
3642                         val |= BIT2;
3643                 else
3644                         val &= ~BIT2;
3645         }
3646         write_reg(info, CHA + MODE, val);
3647
3648         if (info->serial_signals & SerialSignal_DTR)
3649                 clear_reg_bits(info, CHA + PVR, PVR_DTR);
3650         else
3651                 set_reg_bits(info, CHA + PVR, PVR_DTR);
3652 }
3653
3654 static void rx_reset_buffers(MGSLPC_INFO *info)
3655 {
3656         RXBUF *buf;
3657         int i;
3658
3659         info->rx_put = 0;
3660         info->rx_get = 0;
3661         info->rx_frame_count = 0;
3662         for (i=0 ; i < info->rx_buf_count ; i++) {
3663                 buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
3664                 buf->status = buf->count = 0;
3665         }
3666 }
3667
3668 /* Attempt to return a received HDLC frame
3669  * Only frames received without errors are returned.
3670  *
3671  * Returns true if frame returned, otherwise false
3672  */
3673 static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty)
3674 {
3675         unsigned short status;
3676         RXBUF *buf;
3677         unsigned int framesize = 0;
3678         unsigned long flags;
3679         bool return_frame = false;
3680
3681         if (info->rx_frame_count == 0)
3682                 return false;
3683
3684         buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
3685
3686         status = buf->status;
3687
3688         /* 07  VFR  1=valid frame
3689          * 06  RDO  1=data overrun
3690          * 05  CRC  1=OK, 0=error
3691          * 04  RAB  1=frame aborted
3692          */
3693         if ((status & 0xf0) != 0xA0) {
3694                 if (!(status & BIT7) || (status & BIT4))
3695                         info->icount.rxabort++;
3696                 else if (status & BIT6)
3697                         info->icount.rxover++;
3698                 else if (!(status & BIT5)) {
3699                         info->icount.rxcrc++;
3700                         if (info->params.crc_type & HDLC_CRC_RETURN_EX)
3701                                 return_frame = true;
3702                 }
3703                 framesize = 0;
3704 #if SYNCLINK_GENERIC_HDLC
3705                 {
3706                         info->netdev->stats.rx_errors++;
3707                         info->netdev->stats.rx_frame_errors++;
3708                 }
3709 #endif
3710         } else
3711                 return_frame = true;
3712
3713         if (return_frame)
3714                 framesize = buf->count;
3715
3716         if (debug_level >= DEBUG_LEVEL_BH)
3717                 printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
3718                         __FILE__,__LINE__,info->device_name,status,framesize);
3719
3720         if (debug_level >= DEBUG_LEVEL_DATA)
3721                 trace_block(info, buf->data, framesize, 0);
3722
3723         if (framesize) {
3724                 if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
3725                       framesize+1 > info->max_frame_size) ||
3726                     framesize > info->max_frame_size)
3727                         info->icount.rxlong++;
3728                 else {
3729                         if (status & BIT5)
3730                                 info->icount.rxok++;
3731
3732                         if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
3733                                 *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
3734                                 ++framesize;
3735                         }
3736
3737 #if SYNCLINK_GENERIC_HDLC
3738                         if (info->netcount)
3739                                 hdlcdev_rx(info, buf->data, framesize);
3740                         else
3741 #endif
3742                                 ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
3743                 }
3744         }
3745
3746         spin_lock_irqsave(&info->lock,flags);
3747         buf->status = buf->count = 0;
3748         info->rx_frame_count--;
3749         info->rx_get++;
3750         if (info->rx_get >= info->rx_buf_count)
3751                 info->rx_get = 0;
3752         spin_unlock_irqrestore(&info->lock,flags);
3753
3754         return true;
3755 }
3756
3757 static bool register_test(MGSLPC_INFO *info)
3758 {
3759         static unsigned char patterns[] =
3760             { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
3761         static unsigned int count = ARRAY_SIZE(patterns);
3762         unsigned int i;
3763         bool rc = true;
3764         unsigned long flags;
3765
3766         spin_lock_irqsave(&info->lock,flags);
3767         reset_device(info);
3768
3769         for (i = 0; i < count; i++) {
3770                 write_reg(info, XAD1, patterns[i]);
3771                 write_reg(info, XAD2, patterns[(i + 1) % count]);
3772                 if ((read_reg(info, XAD1) != patterns[i]) ||
3773                     (read_reg(info, XAD2) != patterns[(i + 1) % count])) {
3774                         rc = false;
3775                         break;
3776                 }
3777         }
3778
3779         spin_unlock_irqrestore(&info->lock,flags);
3780         return rc;
3781 }
3782
3783 static bool irq_test(MGSLPC_INFO *info)
3784 {
3785         unsigned long end_time;
3786         unsigned long flags;
3787
3788         spin_lock_irqsave(&info->lock,flags);
3789         reset_device(info);
3790
3791         info->testing_irq = true;
3792         hdlc_mode(info);
3793
3794         info->irq_occurred = false;
3795
3796         /* init hdlc mode */
3797
3798         irq_enable(info, CHA, IRQ_TIMER);
3799         write_reg(info, CHA + TIMR, 0); /* 512 cycles */
3800         issue_command(info, CHA, CMD_START_TIMER);
3801
3802         spin_unlock_irqrestore(&info->lock,flags);
3803
3804         end_time=100;
3805         while(end_time-- && !info->irq_occurred) {
3806                 msleep_interruptible(10);
3807         }
3808
3809         info->testing_irq = false;
3810
3811         spin_lock_irqsave(&info->lock,flags);
3812         reset_device(info);
3813         spin_unlock_irqrestore(&info->lock,flags);
3814
3815         return info->irq_occurred;
3816 }
3817
3818 static int adapter_test(MGSLPC_INFO *info)
3819 {
3820         if (!register_test(info)) {
3821                 info->init_error = DiagStatus_AddressFailure;
3822                 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
3823                         __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
3824                 return -ENODEV;
3825         }
3826
3827         if (!irq_test(info)) {
3828                 info->init_error = DiagStatus_IrqFailure;
3829                 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
3830                         __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
3831                 return -ENODEV;
3832         }
3833
3834         if (debug_level >= DEBUG_LEVEL_INFO)
3835                 printk("%s(%d):device %s passed diagnostics\n",
3836                         __FILE__,__LINE__,info->device_name);
3837         return 0;
3838 }
3839
3840 static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
3841 {
3842         int i;
3843         int linecount;
3844         if (xmit)
3845                 printk("%s tx data:\n",info->device_name);
3846         else
3847                 printk("%s rx data:\n",info->device_name);
3848
3849         while(count) {
3850                 if (count > 16)
3851                         linecount = 16;
3852                 else
3853                         linecount = count;
3854
3855                 for(i=0;i<linecount;i++)
3856                         printk("%02X ",(unsigned char)data[i]);
3857                 for(;i<17;i++)
3858                         printk("   ");
3859                 for(i=0;i<linecount;i++) {
3860                         if (data[i]>=040 && data[i]<=0176)
3861                                 printk("%c",data[i]);
3862                         else
3863                                 printk(".");
3864                 }
3865                 printk("\n");
3866
3867                 data  += linecount;
3868                 count -= linecount;
3869         }
3870 }
3871
3872 /* HDLC frame time out
3873  * update stats and do tx completion processing
3874  */
3875 static void tx_timeout(unsigned long context)
3876 {
3877         MGSLPC_INFO *info = (MGSLPC_INFO*)context;
3878         unsigned long flags;
3879
3880         if ( debug_level >= DEBUG_LEVEL_INFO )
3881                 printk( "%s(%d):tx_timeout(%s)\n",
3882                         __FILE__,__LINE__,info->device_name);
3883         if(info->tx_active &&
3884            info->params.mode == MGSL_MODE_HDLC) {
3885                 info->icount.txtimeout++;
3886         }
3887         spin_lock_irqsave(&info->lock,flags);
3888         info->tx_active = false;
3889         info->tx_count = info->tx_put = info->tx_get = 0;
3890
3891         spin_unlock_irqrestore(&info->lock,flags);
3892
3893 #if SYNCLINK_GENERIC_HDLC
3894         if (info->netcount)
3895                 hdlcdev_tx_done(info);
3896         else
3897 #endif
3898         {
3899                 struct tty_struct *tty = tty_port_tty_get(&info->port);
3900                 bh_transmit(info, tty);
3901                 tty_kref_put(tty);
3902         }
3903 }
3904
3905 #if SYNCLINK_GENERIC_HDLC
3906
3907 /**
3908  * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
3909  * set encoding and frame check sequence (FCS) options
3910  *
3911  * dev       pointer to network device structure
3912  * encoding  serial encoding setting
3913  * parity    FCS setting
3914  *
3915  * returns 0 if success, otherwise error code
3916  */
3917 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
3918                           unsigned short parity)
3919 {
3920         MGSLPC_INFO *info = dev_to_port(dev);
3921         struct tty_struct *tty;
3922         unsigned char  new_encoding;
3923         unsigned short new_crctype;
3924
3925         /* return error if TTY interface open */
3926         if (info->port.count)
3927                 return -EBUSY;
3928
3929         switch (encoding)
3930         {
3931         case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
3932         case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
3933         case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
3934         case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
3935         case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
3936         default: return -EINVAL;
3937         }
3938
3939         switch (parity)
3940         {
3941         case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
3942         case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
3943         case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
3944         default: return -EINVAL;
3945         }
3946
3947         info->params.encoding = new_encoding;
3948         info->params.crc_type = new_crctype;
3949
3950         /* if network interface up, reprogram hardware */
3951         if (info->netcount) {
3952                 tty = tty_port_tty_get(&info->port);
3953                 mgslpc_program_hw(info, tty);
3954                 tty_kref_put(tty);
3955         }
3956
3957         return 0;
3958 }
3959
3960 /**
3961  * called by generic HDLC layer to send frame
3962  *
3963  * skb  socket buffer containing HDLC frame
3964  * dev  pointer to network device structure
3965  */
3966 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
3967                                       struct net_device *dev)
3968 {
3969         MGSLPC_INFO *info = dev_to_port(dev);
3970         unsigned long flags;
3971
3972         if (debug_level >= DEBUG_LEVEL_INFO)
3973                 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
3974
3975         /* stop sending until this frame completes */
3976         netif_stop_queue(dev);
3977
3978         /* copy data to device buffers */
3979         skb_copy_from_linear_data(skb, info->tx_buf, skb->len);
3980         info->tx_get = 0;
3981         info->tx_put = info->tx_count = skb->len;
3982
3983         /* update network statistics */
3984         dev->stats.tx_packets++;
3985         dev->stats.tx_bytes += skb->len;
3986
3987         /* done with socket buffer, so free it */
3988         dev_kfree_skb(skb);
3989
3990         /* save start time for transmit timeout detection */
3991         dev->trans_start = jiffies;
3992
3993         /* start hardware transmitter if necessary */
3994         spin_lock_irqsave(&info->lock,flags);
3995         if (!info->tx_active) {
3996                 struct tty_struct *tty = tty_port_tty_get(&info->port);
3997                 tx_start(info, tty);
3998                 tty_kref_put(tty);
3999         }
4000         spin_unlock_irqrestore(&info->lock,flags);
4001
4002         return NETDEV_TX_OK;
4003 }
4004
4005 /**
4006  * called by network layer when interface enabled
4007  * claim resources and initialize hardware
4008  *
4009  * dev  pointer to network device structure
4010  *
4011  * returns 0 if success, otherwise error code
4012  */
4013 static int hdlcdev_open(struct net_device *dev)
4014 {
4015         MGSLPC_INFO *info = dev_to_port(dev);
4016         struct tty_struct *tty;
4017         int rc;
4018         unsigned long flags;
4019
4020         if (debug_level >= DEBUG_LEVEL_INFO)
4021                 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
4022
4023         /* generic HDLC layer open processing */
4024         if ((rc = hdlc_open(dev)))
4025                 return rc;
4026
4027         /* arbitrate between network and tty opens */
4028         spin_lock_irqsave(&info->netlock, flags);
4029         if (info->port.count != 0 || info->netcount != 0) {
4030                 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
4031                 spin_unlock_irqrestore(&info->netlock, flags);
4032                 return -EBUSY;
4033         }
4034         info->netcount=1;
4035         spin_unlock_irqrestore(&info->netlock, flags);
4036
4037         tty = tty_port_tty_get(&info->port);
4038         /* claim resources and init adapter */
4039         if ((rc = startup(info, tty)) != 0) {
4040                 tty_kref_put(tty);
4041                 spin_lock_irqsave(&info->netlock, flags);
4042                 info->netcount=0;
4043                 spin_unlock_irqrestore(&info->netlock, flags);
4044                 return rc;
4045         }
4046         /* assert DTR and RTS, apply hardware settings */
4047         info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
4048         mgslpc_program_hw(info, tty);
4049         tty_kref_put(tty);
4050
4051         /* enable network layer transmit */
4052         dev->trans_start = jiffies;
4053         netif_start_queue(dev);
4054
4055         /* inform generic HDLC layer of current DCD status */
4056         spin_lock_irqsave(&info->lock, flags);
4057         get_signals(info);
4058         spin_unlock_irqrestore(&info->lock, flags);
4059         if (info->serial_signals & SerialSignal_DCD)
4060                 netif_carrier_on(dev);
4061         else
4062                 netif_carrier_off(dev);
4063         return 0;
4064 }
4065
4066 /**
4067  * called by network layer when interface is disabled
4068  * shutdown hardware and release resources
4069  *
4070  * dev  pointer to network device structure
4071  *
4072  * returns 0 if success, otherwise error code
4073  */
4074 static int hdlcdev_close(struct net_device *dev)
4075 {
4076         MGSLPC_INFO *info = dev_to_port(dev);
4077         struct tty_struct *tty = tty_port_tty_get(&info->port);
4078         unsigned long flags;
4079
4080         if (debug_level >= DEBUG_LEVEL_INFO)
4081                 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
4082
4083         netif_stop_queue(dev);
4084
4085         /* shutdown adapter and release resources */
4086         shutdown(info, tty);
4087         tty_kref_put(tty);
4088         hdlc_close(dev);
4089
4090         spin_lock_irqsave(&info->netlock, flags);
4091         info->netcount=0;
4092         spin_unlock_irqrestore(&info->netlock, flags);
4093
4094         return 0;
4095 }
4096
4097 /**
4098  * called by network layer to process IOCTL call to network device
4099  *
4100  * dev  pointer to network device structure
4101  * ifr  pointer to network interface request structure
4102  * cmd  IOCTL command code
4103  *
4104  * returns 0 if success, otherwise error code
4105  */
4106 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
4107 {
4108         const size_t size = sizeof(sync_serial_settings);
4109         sync_serial_settings new_line;
4110         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
4111         MGSLPC_INFO *info = dev_to_port(dev);
4112         unsigned int flags;
4113
4114         if (debug_level >= DEBUG_LEVEL_INFO)
4115                 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
4116
4117         /* return error if TTY interface open */
4118         if (info->port.count)
4119                 return -EBUSY;
4120
4121         if (cmd != SIOCWANDEV)
4122                 return hdlc_ioctl(dev, ifr, cmd);
4123
4124         switch(ifr->ifr_settings.type) {
4125         case IF_GET_IFACE: /* return current sync_serial_settings */
4126
4127                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
4128                 if (ifr->ifr_settings.size < size) {
4129                         ifr->ifr_settings.size = size; /* data size wanted */
4130                         return -ENOBUFS;
4131                 }
4132
4133                 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4134                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4135                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4136                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
4137
4138                 switch (flags){
4139                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
4140                 case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
4141                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
4142                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
4143                 default: new_line.clock_type = CLOCK_DEFAULT;
4144                 }
4145
4146                 new_line.clock_rate = info->params.clock_speed;
4147                 new_line.loopback   = info->params.loopback ? 1:0;
4148
4149                 if (copy_to_user(line, &new_line, size))
4150                         return -EFAULT;
4151                 return 0;
4152
4153         case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
4154
4155                 if(!capable(CAP_NET_ADMIN))
4156                         return -EPERM;
4157                 if (copy_from_user(&new_line, line, size))
4158                         return -EFAULT;
4159
4160                 switch (new_line.clock_type)
4161                 {
4162                 case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
4163                 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
4164                 case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
4165                 case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
4166                 case CLOCK_DEFAULT:  flags = info->params.flags &
4167                                              (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4168                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4169                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4170                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
4171                 default: return -EINVAL;
4172                 }
4173
4174                 if (new_line.loopback != 0 && new_line.loopback != 1)
4175                         return -EINVAL;
4176
4177                 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4178                                         HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
4179                                         HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4180                                         HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
4181                 info->params.flags |= flags;
4182
4183                 info->params.loopback = new_line.loopback;
4184
4185                 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
4186                         info->params.clock_speed = new_line.clock_rate;
4187                 else
4188                         info->params.clock_speed = 0;
4189
4190                 /* if network interface up, reprogram hardware */
4191                 if (info->netcount) {
4192                         struct tty_struct *tty = tty_port_tty_get(&info->port);
4193                         mgslpc_program_hw(info, tty);
4194                         tty_kref_put(tty);
4195                 }
4196                 return 0;
4197
4198         default:
4199                 return hdlc_ioctl(dev, ifr, cmd);
4200         }
4201 }
4202
4203 /**
4204  * called by network layer when transmit timeout is detected
4205  *
4206  * dev  pointer to network device structure
4207  */
4208 static void hdlcdev_tx_timeout(struct net_device *dev)
4209 {
4210         MGSLPC_INFO *info = dev_to_port(dev);
4211         unsigned long flags;
4212
4213         if (debug_level >= DEBUG_LEVEL_INFO)
4214                 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
4215
4216         dev->stats.tx_errors++;
4217         dev->stats.tx_aborted_errors++;
4218
4219         spin_lock_irqsave(&info->lock,flags);
4220         tx_stop(info);
4221         spin_unlock_irqrestore(&info->lock,flags);
4222
4223         netif_wake_queue(dev);
4224 }
4225
4226 /**
4227  * called by device driver when transmit completes
4228  * reenable network layer transmit if stopped
4229  *
4230  * info  pointer to device instance information
4231  */
4232 static void hdlcdev_tx_done(MGSLPC_INFO *info)
4233 {
4234         if (netif_queue_stopped(info->netdev))
4235                 netif_wake_queue(info->netdev);
4236 }
4237
4238 /**
4239  * called by device driver when frame received
4240  * pass frame to network layer
4241  *
4242  * info  pointer to device instance information
4243  * buf   pointer to buffer contianing frame data
4244  * size  count of data bytes in buf
4245  */
4246 static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
4247 {
4248         struct sk_buff *skb = dev_alloc_skb(size);
4249         struct net_device *dev = info->netdev;
4250
4251         if (debug_level >= DEBUG_LEVEL_INFO)
4252                 printk("hdlcdev_rx(%s)\n",dev->name);
4253
4254         if (skb == NULL) {
4255                 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
4256                 dev->stats.rx_dropped++;
4257                 return;
4258         }
4259
4260         memcpy(skb_put(skb, size), buf, size);
4261
4262         skb->protocol = hdlc_type_trans(skb, dev);
4263
4264         dev->stats.rx_packets++;
4265         dev->stats.rx_bytes += size;
4266
4267         netif_rx(skb);
4268 }
4269
4270 static const struct net_device_ops hdlcdev_ops = {
4271         .ndo_open       = hdlcdev_open,
4272         .ndo_stop       = hdlcdev_close,
4273         .ndo_change_mtu = hdlc_change_mtu,
4274         .ndo_start_xmit = hdlc_start_xmit,
4275         .ndo_do_ioctl   = hdlcdev_ioctl,
4276         .ndo_tx_timeout = hdlcdev_tx_timeout,
4277 };
4278
4279 /**
4280  * called by device driver when adding device instance
4281  * do generic HDLC initialization
4282  *
4283  * info  pointer to device instance information
4284  *
4285  * returns 0 if success, otherwise error code
4286  */
4287 static int hdlcdev_init(MGSLPC_INFO *info)
4288 {
4289         int rc;
4290         struct net_device *dev;
4291         hdlc_device *hdlc;
4292
4293         /* allocate and initialize network and HDLC layer objects */
4294
4295         if (!(dev = alloc_hdlcdev(info))) {
4296                 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
4297                 return -ENOMEM;
4298         }
4299
4300         /* for network layer reporting purposes only */
4301         dev->base_addr = info->io_base;
4302         dev->irq       = info->irq_level;
4303
4304         /* network layer callbacks and settings */
4305         dev->netdev_ops     = &hdlcdev_ops;
4306         dev->watchdog_timeo = 10 * HZ;
4307         dev->tx_queue_len   = 50;
4308
4309         /* generic HDLC layer callbacks and settings */
4310         hdlc         = dev_to_hdlc(dev);
4311         hdlc->attach = hdlcdev_attach;
4312         hdlc->xmit   = hdlcdev_xmit;
4313
4314         /* register objects with HDLC layer */
4315         if ((rc = register_hdlc_device(dev))) {
4316                 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
4317                 free_netdev(dev);
4318                 return rc;
4319         }
4320
4321         info->netdev = dev;
4322         return 0;
4323 }
4324
4325 /**
4326  * called by device driver when removing device instance
4327  * do generic HDLC cleanup
4328  *
4329  * info  pointer to device instance information
4330  */
4331 static void hdlcdev_exit(MGSLPC_INFO *info)
4332 {
4333         unregister_hdlc_device(info->netdev);
4334         free_netdev(info->netdev);
4335         info->netdev = NULL;
4336 }
4337
4338 #endif /* CONFIG_HDLC */
4339