]> nv-tegra.nvidia Code Review - linux-3.10.git/blob - drivers/ata/sata_fsl.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
[linux-3.10.git] / drivers / ata / sata_fsl.c
1 /*
2  * drivers/ata/sata_fsl.c
3  *
4  * Freescale 3.0Gbps SATA device driver
5  *
6  * Author: Ashish Kalra <ashish.kalra@freescale.com>
7  * Li Yang <leoli@freescale.com>
8  *
9  * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
10  *
11  * This program is free software; you can redistribute  it and/or modify it
12  * under  the terms of  the GNU General  Public License as published by the
13  * Free Software Foundation;  either version 2 of the  License, or (at your
14  * option) any later version.
15  *
16  */
17
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/platform_device.h>
21
22 #include <scsi/scsi_host.h>
23 #include <scsi/scsi_cmnd.h>
24 #include <linux/libata.h>
25 #include <asm/io.h>
26 #include <linux/of_platform.h>
27
28 /* Controller information */
29 enum {
30         SATA_FSL_QUEUE_DEPTH    = 16,
31         SATA_FSL_MAX_PRD        = 63,
32         SATA_FSL_MAX_PRD_USABLE = SATA_FSL_MAX_PRD - 1,
33         SATA_FSL_MAX_PRD_DIRECT = 16,   /* Direct PRDT entries */
34
35         SATA_FSL_HOST_FLAGS     = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
36                                 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
37                                 ATA_FLAG_PMP | ATA_FLAG_NCQ | ATA_FLAG_AN),
38
39         SATA_FSL_MAX_CMDS       = SATA_FSL_QUEUE_DEPTH,
40         SATA_FSL_CMD_HDR_SIZE   = 16,   /* 4 DWORDS */
41         SATA_FSL_CMD_SLOT_SIZE  = (SATA_FSL_MAX_CMDS * SATA_FSL_CMD_HDR_SIZE),
42
43         /*
44          * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
45          * chained indirect PRDEs upto a max count of 63.
46          * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will
47          * be setup as an indirect descriptor, pointing to it's next
48          * (contiguous) PRDE. Though chained indirect PRDE arrays are
49          * supported,it will be more efficient to use a direct PRDT and
50          * a single chain/link to indirect PRDE array/PRDT.
51          */
52
53         SATA_FSL_CMD_DESC_CFIS_SZ       = 32,
54         SATA_FSL_CMD_DESC_SFIS_SZ       = 32,
55         SATA_FSL_CMD_DESC_ACMD_SZ       = 16,
56         SATA_FSL_CMD_DESC_RSRVD         = 16,
57
58         SATA_FSL_CMD_DESC_SIZE  = (SATA_FSL_CMD_DESC_CFIS_SZ +
59                                  SATA_FSL_CMD_DESC_SFIS_SZ +
60                                  SATA_FSL_CMD_DESC_ACMD_SZ +
61                                  SATA_FSL_CMD_DESC_RSRVD +
62                                  SATA_FSL_MAX_PRD * 16),
63
64         SATA_FSL_CMD_DESC_OFFSET_TO_PRDT        =
65                                 (SATA_FSL_CMD_DESC_CFIS_SZ +
66                                  SATA_FSL_CMD_DESC_SFIS_SZ +
67                                  SATA_FSL_CMD_DESC_ACMD_SZ +
68                                  SATA_FSL_CMD_DESC_RSRVD),
69
70         SATA_FSL_CMD_DESC_AR_SZ = (SATA_FSL_CMD_DESC_SIZE * SATA_FSL_MAX_CMDS),
71         SATA_FSL_PORT_PRIV_DMA_SZ = (SATA_FSL_CMD_SLOT_SIZE +
72                                         SATA_FSL_CMD_DESC_AR_SZ),
73
74         /*
75          * MPC8315 has two SATA controllers, SATA1 & SATA2
76          * (one port per controller)
77          * MPC837x has 2/4 controllers, one port per controller
78          */
79
80         SATA_FSL_MAX_PORTS      = 1,
81
82         SATA_FSL_IRQ_FLAG       = IRQF_SHARED,
83 };
84
85 /*
86 * Host Controller command register set - per port
87 */
88 enum {
89         CQ = 0,
90         CA = 8,
91         CC = 0x10,
92         CE = 0x18,
93         DE = 0x20,
94         CHBA = 0x24,
95         HSTATUS = 0x28,
96         HCONTROL = 0x2C,
97         CQPMP = 0x30,
98         SIGNATURE = 0x34,
99         ICC = 0x38,
100
101         /*
102          * Host Status Register (HStatus) bitdefs
103          */
104         ONLINE = (1 << 31),
105         GOING_OFFLINE = (1 << 30),
106         BIST_ERR = (1 << 29),
107
108         FATAL_ERR_HC_MASTER_ERR = (1 << 18),
109         FATAL_ERR_PARITY_ERR_TX = (1 << 17),
110         FATAL_ERR_PARITY_ERR_RX = (1 << 16),
111         FATAL_ERR_DATA_UNDERRUN = (1 << 13),
112         FATAL_ERR_DATA_OVERRUN = (1 << 12),
113         FATAL_ERR_CRC_ERR_TX = (1 << 11),
114         FATAL_ERR_CRC_ERR_RX = (1 << 10),
115         FATAL_ERR_FIFO_OVRFL_TX = (1 << 9),
116         FATAL_ERR_FIFO_OVRFL_RX = (1 << 8),
117
118         FATAL_ERROR_DECODE = FATAL_ERR_HC_MASTER_ERR |
119             FATAL_ERR_PARITY_ERR_TX |
120             FATAL_ERR_PARITY_ERR_RX |
121             FATAL_ERR_DATA_UNDERRUN |
122             FATAL_ERR_DATA_OVERRUN |
123             FATAL_ERR_CRC_ERR_TX |
124             FATAL_ERR_CRC_ERR_RX |
125             FATAL_ERR_FIFO_OVRFL_TX | FATAL_ERR_FIFO_OVRFL_RX,
126
127         INT_ON_FATAL_ERR = (1 << 5),
128         INT_ON_PHYRDY_CHG = (1 << 4),
129
130         INT_ON_SIGNATURE_UPDATE = (1 << 3),
131         INT_ON_SNOTIFY_UPDATE = (1 << 2),
132         INT_ON_SINGL_DEVICE_ERR = (1 << 1),
133         INT_ON_CMD_COMPLETE = 1,
134
135         INT_ON_ERROR = INT_ON_FATAL_ERR | INT_ON_SNOTIFY_UPDATE |
136             INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
137
138         /*
139          * Host Control Register (HControl) bitdefs
140          */
141         HCONTROL_ONLINE_PHY_RST = (1 << 31),
142         HCONTROL_FORCE_OFFLINE = (1 << 30),
143         HCONTROL_PARITY_PROT_MOD = (1 << 14),
144         HCONTROL_DPATH_PARITY = (1 << 12),
145         HCONTROL_SNOOP_ENABLE = (1 << 10),
146         HCONTROL_PMP_ATTACHED = (1 << 9),
147         HCONTROL_COPYOUT_STATFIS = (1 << 8),
148         IE_ON_FATAL_ERR = (1 << 5),
149         IE_ON_PHYRDY_CHG = (1 << 4),
150         IE_ON_SIGNATURE_UPDATE = (1 << 3),
151         IE_ON_SNOTIFY_UPDATE = (1 << 2),
152         IE_ON_SINGL_DEVICE_ERR = (1 << 1),
153         IE_ON_CMD_COMPLETE = 1,
154
155         DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
156             IE_ON_SIGNATURE_UPDATE | IE_ON_SNOTIFY_UPDATE |
157             IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
158
159         EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
160         DATA_SNOOP_ENABLE = (1 << 22),
161 };
162
163 /*
164  * SATA Superset Registers
165  */
166 enum {
167         SSTATUS = 0,
168         SERROR = 4,
169         SCONTROL = 8,
170         SNOTIFY = 0xC,
171 };
172
173 /*
174  * Control Status Register Set
175  */
176 enum {
177         TRANSCFG = 0,
178         TRANSSTATUS = 4,
179         LINKCFG = 8,
180         LINKCFG1 = 0xC,
181         LINKCFG2 = 0x10,
182         LINKSTATUS = 0x14,
183         LINKSTATUS1 = 0x18,
184         PHYCTRLCFG = 0x1C,
185         COMMANDSTAT = 0x20,
186 };
187
188 /* PHY (link-layer) configuration control */
189 enum {
190         PHY_BIST_ENABLE = 0x01,
191 };
192
193 /*
194  * Command Header Table entry, i.e, command slot
195  * 4 Dwords per command slot, command header size ==  64 Dwords.
196  */
197 struct cmdhdr_tbl_entry {
198         u32 cda;
199         u32 prde_fis_len;
200         u32 ttl;
201         u32 desc_info;
202 };
203
204 /*
205  * Description information bitdefs
206  */
207 enum {
208         CMD_DESC_RES = (1 << 11),
209         VENDOR_SPECIFIC_BIST = (1 << 10),
210         CMD_DESC_SNOOP_ENABLE = (1 << 9),
211         FPDMA_QUEUED_CMD = (1 << 8),
212         SRST_CMD = (1 << 7),
213         BIST = (1 << 6),
214         ATAPI_CMD = (1 << 5),
215 };
216
217 /*
218  * Command Descriptor
219  */
220 struct command_desc {
221         u8 cfis[8 * 4];
222         u8 sfis[8 * 4];
223         u8 acmd[4 * 4];
224         u8 fill[4 * 4];
225         u32 prdt[SATA_FSL_MAX_PRD_DIRECT * 4];
226         u32 prdt_indirect[(SATA_FSL_MAX_PRD - SATA_FSL_MAX_PRD_DIRECT) * 4];
227 };
228
229 /*
230  * Physical region table descriptor(PRD)
231  */
232
233 struct prde {
234         u32 dba;
235         u8 fill[2 * 4];
236         u32 ddc_and_ext;
237 };
238
239 /*
240  * ata_port private data
241  * This is our per-port instance data.
242  */
243 struct sata_fsl_port_priv {
244         struct cmdhdr_tbl_entry *cmdslot;
245         dma_addr_t cmdslot_paddr;
246         struct command_desc *cmdentry;
247         dma_addr_t cmdentry_paddr;
248 };
249
250 /*
251  * ata_port->host_set private data
252  */
253 struct sata_fsl_host_priv {
254         void __iomem *hcr_base;
255         void __iomem *ssr_base;
256         void __iomem *csr_base;
257         int irq;
258 };
259
260 static inline unsigned int sata_fsl_tag(unsigned int tag,
261                                         void __iomem *hcr_base)
262 {
263         /* We let libATA core do actual (queue) tag allocation */
264
265         /* all non NCQ/queued commands should have tag#0 */
266         if (ata_tag_internal(tag)) {
267                 DPRINTK("mapping internal cmds to tag#0\n");
268                 return 0;
269         }
270
271         if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) {
272                 DPRINTK("tag %d invalid : out of range\n", tag);
273                 return 0;
274         }
275
276         if (unlikely((ioread32(hcr_base + CQ)) & (1 << tag))) {
277                 DPRINTK("tag %d invalid : in use!!\n", tag);
278                 return 0;
279         }
280
281         return tag;
282 }
283
284 static void sata_fsl_setup_cmd_hdr_entry(struct sata_fsl_port_priv *pp,
285                                          unsigned int tag, u32 desc_info,
286                                          u32 data_xfer_len, u8 num_prde,
287                                          u8 fis_len)
288 {
289         dma_addr_t cmd_descriptor_address;
290
291         cmd_descriptor_address = pp->cmdentry_paddr +
292             tag * SATA_FSL_CMD_DESC_SIZE;
293
294         /* NOTE: both data_xfer_len & fis_len are Dword counts */
295
296         pp->cmdslot[tag].cda = cpu_to_le32(cmd_descriptor_address);
297         pp->cmdslot[tag].prde_fis_len =
298             cpu_to_le32((num_prde << 16) | (fis_len << 2));
299         pp->cmdslot[tag].ttl = cpu_to_le32(data_xfer_len & ~0x03);
300         pp->cmdslot[tag].desc_info = cpu_to_le32(desc_info | (tag & 0x1F));
301
302         VPRINTK("cda=0x%x, prde_fis_len=0x%x, ttl=0x%x, di=0x%x\n",
303                 pp->cmdslot[tag].cda,
304                 pp->cmdslot[tag].prde_fis_len,
305                 pp->cmdslot[tag].ttl, pp->cmdslot[tag].desc_info);
306
307 }
308
309 static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
310                                      u32 *ttl, dma_addr_t cmd_desc_paddr)
311 {
312         struct scatterlist *sg;
313         unsigned int num_prde = 0;
314         u32 ttl_dwords = 0;
315
316         /*
317          * NOTE : direct & indirect prdt's are contiguously allocated
318          */
319         struct prde *prd = (struct prde *)&((struct command_desc *)
320                                             cmd_desc)->prdt;
321
322         struct prde *prd_ptr_to_indirect_ext = NULL;
323         unsigned indirect_ext_segment_sz = 0;
324         dma_addr_t indirect_ext_segment_paddr;
325         unsigned int si;
326
327         VPRINTK("SATA FSL : cd = 0x%p, prd = 0x%p\n", cmd_desc, prd);
328
329         indirect_ext_segment_paddr = cmd_desc_paddr +
330             SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
331
332         for_each_sg(qc->sg, sg, qc->n_elem, si) {
333                 dma_addr_t sg_addr = sg_dma_address(sg);
334                 u32 sg_len = sg_dma_len(sg);
335
336                 VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
337                         (unsigned long long)sg_addr, sg_len);
338
339                 /* warn if each s/g element is not dword aligned */
340                 if (sg_addr & 0x03)
341                         ata_port_printk(qc->ap, KERN_ERR,
342                                         "s/g addr unaligned : 0x%llx\n",
343                                         (unsigned long long)sg_addr);
344                 if (sg_len & 0x03)
345                         ata_port_printk(qc->ap, KERN_ERR,
346                                         "s/g len unaligned : 0x%x\n", sg_len);
347
348                 if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) &&
349                     sg_next(sg) != NULL) {
350                         VPRINTK("setting indirect prde\n");
351                         prd_ptr_to_indirect_ext = prd;
352                         prd->dba = cpu_to_le32(indirect_ext_segment_paddr);
353                         indirect_ext_segment_sz = 0;
354                         ++prd;
355                         ++num_prde;
356                 }
357
358                 ttl_dwords += sg_len;
359                 prd->dba = cpu_to_le32(sg_addr);
360                 prd->ddc_and_ext =
361                     cpu_to_le32(DATA_SNOOP_ENABLE | (sg_len & ~0x03));
362
363                 VPRINTK("sg_fill, ttl=%d, dba=0x%x, ddc=0x%x\n",
364                         ttl_dwords, prd->dba, prd->ddc_and_ext);
365
366                 ++num_prde;
367                 ++prd;
368                 if (prd_ptr_to_indirect_ext)
369                         indirect_ext_segment_sz += sg_len;
370         }
371
372         if (prd_ptr_to_indirect_ext) {
373                 /* set indirect extension flag along with indirect ext. size */
374                 prd_ptr_to_indirect_ext->ddc_and_ext =
375                     cpu_to_le32((EXT_INDIRECT_SEG_PRD_FLAG |
376                                  DATA_SNOOP_ENABLE |
377                                  (indirect_ext_segment_sz & ~0x03)));
378         }
379
380         *ttl = ttl_dwords;
381         return num_prde;
382 }
383
384 static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
385 {
386         struct ata_port *ap = qc->ap;
387         struct sata_fsl_port_priv *pp = ap->private_data;
388         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
389         void __iomem *hcr_base = host_priv->hcr_base;
390         unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
391         struct command_desc *cd;
392         u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
393         u32 num_prde = 0;
394         u32 ttl_dwords = 0;
395         dma_addr_t cd_paddr;
396
397         cd = (struct command_desc *)pp->cmdentry + tag;
398         cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
399
400         ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis);
401
402         VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
403                 cd->cfis[0], cd->cfis[1], cd->cfis[2]);
404
405         if (qc->tf.protocol == ATA_PROT_NCQ) {
406                 VPRINTK("FPDMA xfer,Sctor cnt[0:7],[8:15] = %d,%d\n",
407                         cd->cfis[3], cd->cfis[11]);
408         }
409
410         /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */
411         if (ata_is_atapi(qc->tf.protocol)) {
412                 desc_info |= ATAPI_CMD;
413                 memset((void *)&cd->acmd, 0, 32);
414                 memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len);
415         }
416
417         if (qc->flags & ATA_QCFLAG_DMAMAP)
418                 num_prde = sata_fsl_fill_sg(qc, (void *)cd,
419                                             &ttl_dwords, cd_paddr);
420
421         if (qc->tf.protocol == ATA_PROT_NCQ)
422                 desc_info |= FPDMA_QUEUED_CMD;
423
424         sata_fsl_setup_cmd_hdr_entry(pp, tag, desc_info, ttl_dwords,
425                                      num_prde, 5);
426
427         VPRINTK("SATA FSL : xx_qc_prep, di = 0x%x, ttl = %d, num_prde = %d\n",
428                 desc_info, ttl_dwords, num_prde);
429 }
430
431 static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
432 {
433         struct ata_port *ap = qc->ap;
434         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
435         void __iomem *hcr_base = host_priv->hcr_base;
436         unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
437
438         VPRINTK("xx_qc_issue called,CQ=0x%x,CA=0x%x,CE=0x%x,CC=0x%x\n",
439                 ioread32(CQ + hcr_base),
440                 ioread32(CA + hcr_base),
441                 ioread32(CE + hcr_base), ioread32(CC + hcr_base));
442
443         iowrite32(qc->dev->link->pmp, CQPMP + hcr_base);
444
445         /* Simply queue command to the controller/device */
446         iowrite32(1 << tag, CQ + hcr_base);
447
448         VPRINTK("xx_qc_issue called, tag=%d, CQ=0x%x, CA=0x%x\n",
449                 tag, ioread32(CQ + hcr_base), ioread32(CA + hcr_base));
450
451         VPRINTK("CE=0x%x, DE=0x%x, CC=0x%x, CmdStat = 0x%x\n",
452                 ioread32(CE + hcr_base),
453                 ioread32(DE + hcr_base),
454                 ioread32(CC + hcr_base),
455                 ioread32(COMMANDSTAT + host_priv->csr_base));
456
457         return 0;
458 }
459
460 static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc)
461 {
462         struct sata_fsl_port_priv *pp = qc->ap->private_data;
463         struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data;
464         void __iomem *hcr_base = host_priv->hcr_base;
465         unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
466         struct command_desc *cd;
467
468         cd = pp->cmdentry + tag;
469
470         ata_tf_from_fis(cd->sfis, &qc->result_tf);
471         return true;
472 }
473
474 static int sata_fsl_scr_write(struct ata_link *link,
475                               unsigned int sc_reg_in, u32 val)
476 {
477         struct sata_fsl_host_priv *host_priv = link->ap->host->private_data;
478         void __iomem *ssr_base = host_priv->ssr_base;
479         unsigned int sc_reg;
480
481         switch (sc_reg_in) {
482         case SCR_STATUS:
483         case SCR_ERROR:
484         case SCR_CONTROL:
485         case SCR_ACTIVE:
486                 sc_reg = sc_reg_in;
487                 break;
488         default:
489                 return -EINVAL;
490         }
491
492         VPRINTK("xx_scr_write, reg_in = %d\n", sc_reg);
493
494         iowrite32(val, ssr_base + (sc_reg * 4));
495         return 0;
496 }
497
498 static int sata_fsl_scr_read(struct ata_link *link,
499                              unsigned int sc_reg_in, u32 *val)
500 {
501         struct sata_fsl_host_priv *host_priv = link->ap->host->private_data;
502         void __iomem *ssr_base = host_priv->ssr_base;
503         unsigned int sc_reg;
504
505         switch (sc_reg_in) {
506         case SCR_STATUS:
507         case SCR_ERROR:
508         case SCR_CONTROL:
509         case SCR_ACTIVE:
510                 sc_reg = sc_reg_in;
511                 break;
512         default:
513                 return -EINVAL;
514         }
515
516         VPRINTK("xx_scr_read, reg_in = %d\n", sc_reg);
517
518         *val = ioread32(ssr_base + (sc_reg * 4));
519         return 0;
520 }
521
522 static void sata_fsl_freeze(struct ata_port *ap)
523 {
524         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
525         void __iomem *hcr_base = host_priv->hcr_base;
526         u32 temp;
527
528         VPRINTK("xx_freeze, CQ=0x%x, CA=0x%x, CE=0x%x, DE=0x%x\n",
529                 ioread32(CQ + hcr_base),
530                 ioread32(CA + hcr_base),
531                 ioread32(CE + hcr_base), ioread32(DE + hcr_base));
532         VPRINTK("CmdStat = 0x%x\n",
533                 ioread32(host_priv->csr_base + COMMANDSTAT));
534
535         /* disable interrupts on the controller/port */
536         temp = ioread32(hcr_base + HCONTROL);
537         iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
538
539         VPRINTK("in xx_freeze : HControl = 0x%x, HStatus = 0x%x\n",
540                 ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
541 }
542
543 static void sata_fsl_thaw(struct ata_port *ap)
544 {
545         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
546         void __iomem *hcr_base = host_priv->hcr_base;
547         u32 temp;
548
549         /* ack. any pending IRQs for this controller/port */
550         temp = ioread32(hcr_base + HSTATUS);
551
552         VPRINTK("xx_thaw, pending IRQs = 0x%x\n", (temp & 0x3F));
553
554         if (temp & 0x3F)
555                 iowrite32((temp & 0x3F), hcr_base + HSTATUS);
556
557         /* enable interrupts on the controller/port */
558         temp = ioread32(hcr_base + HCONTROL);
559         iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
560
561         VPRINTK("xx_thaw : HControl = 0x%x, HStatus = 0x%x\n",
562                 ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
563 }
564
565 static void sata_fsl_pmp_attach(struct ata_port *ap)
566 {
567         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
568         void __iomem *hcr_base = host_priv->hcr_base;
569         u32 temp;
570
571         temp = ioread32(hcr_base + HCONTROL);
572         iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL);
573 }
574
575 static void sata_fsl_pmp_detach(struct ata_port *ap)
576 {
577         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
578         void __iomem *hcr_base = host_priv->hcr_base;
579         u32 temp;
580
581         temp = ioread32(hcr_base + HCONTROL);
582         temp &= ~HCONTROL_PMP_ATTACHED;
583         iowrite32(temp, hcr_base + HCONTROL);
584
585         /* enable interrupts on the controller/port */
586         temp = ioread32(hcr_base + HCONTROL);
587         iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
588
589 }
590
591 static int sata_fsl_port_start(struct ata_port *ap)
592 {
593         struct device *dev = ap->host->dev;
594         struct sata_fsl_port_priv *pp;
595         void *mem;
596         dma_addr_t mem_dma;
597         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
598         void __iomem *hcr_base = host_priv->hcr_base;
599         u32 temp;
600
601         pp = kzalloc(sizeof(*pp), GFP_KERNEL);
602         if (!pp)
603                 return -ENOMEM;
604
605         mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma,
606                                  GFP_KERNEL);
607         if (!mem) {
608                 kfree(pp);
609                 return -ENOMEM;
610         }
611         memset(mem, 0, SATA_FSL_PORT_PRIV_DMA_SZ);
612
613         pp->cmdslot = mem;
614         pp->cmdslot_paddr = mem_dma;
615
616         mem += SATA_FSL_CMD_SLOT_SIZE;
617         mem_dma += SATA_FSL_CMD_SLOT_SIZE;
618
619         pp->cmdentry = mem;
620         pp->cmdentry_paddr = mem_dma;
621
622         ap->private_data = pp;
623
624         VPRINTK("CHBA = 0x%x, cmdentry_phys = 0x%x\n",
625                 pp->cmdslot_paddr, pp->cmdentry_paddr);
626
627         /* Now, update the CHBA register in host controller cmd register set */
628         iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
629
630         /*
631          * Now, we can bring the controller on-line & also initiate
632          * the COMINIT sequence, we simply return here and the boot-probing
633          * & device discovery process is re-initiated by libATA using a
634          * Softreset EH (dummy) session. Hence, boot probing and device
635          * discovey will be part of sata_fsl_softreset() callback.
636          */
637
638         temp = ioread32(hcr_base + HCONTROL);
639         iowrite32((temp | HCONTROL_ONLINE_PHY_RST), hcr_base + HCONTROL);
640
641         VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
642         VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
643         VPRINTK("CHBA  = 0x%x\n", ioread32(hcr_base + CHBA));
644
645 #ifdef CONFIG_MPC8315_DS
646         /*
647          * Workaround for 8315DS board 3gbps link-up issue,
648          * currently limit SATA port to GEN1 speed
649          */
650         sata_fsl_scr_read(&ap->link, SCR_CONTROL, &temp);
651         temp &= ~(0xF << 4);
652         temp |= (0x1 << 4);
653         sata_fsl_scr_write(&ap->link, SCR_CONTROL, temp);
654
655         sata_fsl_scr_read(&ap->link, SCR_CONTROL, &temp);
656         dev_printk(KERN_WARNING, dev, "scr_control, speed limited to %x\n",
657                         temp);
658 #endif
659
660         return 0;
661 }
662
663 static void sata_fsl_port_stop(struct ata_port *ap)
664 {
665         struct device *dev = ap->host->dev;
666         struct sata_fsl_port_priv *pp = ap->private_data;
667         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
668         void __iomem *hcr_base = host_priv->hcr_base;
669         u32 temp;
670
671         /*
672          * Force host controller to go off-line, aborting current operations
673          */
674         temp = ioread32(hcr_base + HCONTROL);
675         temp &= ~HCONTROL_ONLINE_PHY_RST;
676         temp |= HCONTROL_FORCE_OFFLINE;
677         iowrite32(temp, hcr_base + HCONTROL);
678
679         /* Poll for controller to go offline - should happen immediately */
680         ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 1);
681
682         ap->private_data = NULL;
683         dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ,
684                           pp->cmdslot, pp->cmdslot_paddr);
685
686         kfree(pp);
687 }
688
689 static unsigned int sata_fsl_dev_classify(struct ata_port *ap)
690 {
691         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
692         void __iomem *hcr_base = host_priv->hcr_base;
693         struct ata_taskfile tf;
694         u32 temp;
695
696         temp = ioread32(hcr_base + SIGNATURE);
697
698         VPRINTK("raw sig = 0x%x\n", temp);
699         VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
700         VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
701
702         tf.lbah = (temp >> 24) & 0xff;
703         tf.lbam = (temp >> 16) & 0xff;
704         tf.lbal = (temp >> 8) & 0xff;
705         tf.nsect = temp & 0xff;
706
707         return ata_dev_classify(&tf);
708 }
709
710 static int sata_fsl_hardreset(struct ata_link *link, unsigned int *class,
711                                         unsigned long deadline)
712 {
713         struct ata_port *ap = link->ap;
714         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
715         void __iomem *hcr_base = host_priv->hcr_base;
716         u32 temp;
717         int i = 0;
718         unsigned long start_jiffies;
719
720         DPRINTK("in xx_hardreset\n");
721
722 try_offline_again:
723         /*
724          * Force host controller to go off-line, aborting current operations
725          */
726         temp = ioread32(hcr_base + HCONTROL);
727         temp &= ~HCONTROL_ONLINE_PHY_RST;
728         iowrite32(temp, hcr_base + HCONTROL);
729
730         /* Poll for controller to go offline */
731         temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, ONLINE, 1, 500);
732
733         if (temp & ONLINE) {
734                 ata_port_printk(ap, KERN_ERR,
735                                 "Hardreset failed, not off-lined %d\n", i);
736
737                 /*
738                  * Try to offline controller atleast twice
739                  */
740                 i++;
741                 if (i == 2)
742                         goto err;
743                 else
744                         goto try_offline_again;
745         }
746
747         DPRINTK("hardreset, controller off-lined\n");
748         VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
749         VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
750
751         /*
752          * PHY reset should remain asserted for atleast 1ms
753          */
754         msleep(1);
755
756         /*
757          * Now, bring the host controller online again, this can take time
758          * as PHY reset and communication establishment, 1st D2H FIS and
759          * device signature update is done, on safe side assume 500ms
760          * NOTE : Host online status may be indicated immediately!!
761          */
762
763         temp = ioread32(hcr_base + HCONTROL);
764         temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
765         temp |= HCONTROL_PMP_ATTACHED;
766         iowrite32(temp, hcr_base + HCONTROL);
767
768         temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
769
770         if (!(temp & ONLINE)) {
771                 ata_port_printk(ap, KERN_ERR,
772                                 "Hardreset failed, not on-lined\n");
773                 goto err;
774         }
775
776         DPRINTK("hardreset, controller off-lined & on-lined\n");
777         VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
778         VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
779
780         /*
781          * First, wait for the PHYRDY change to occur before waiting for
782          * the signature, and also verify if SStatus indicates device
783          * presence
784          */
785
786         temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0, 1, 500);
787         if ((!(temp & 0x10)) || ata_link_offline(link)) {
788                 ata_port_printk(ap, KERN_WARNING,
789                                 "No Device OR PHYRDY change,Hstatus = 0x%x\n",
790                                 ioread32(hcr_base + HSTATUS));
791                 *class = ATA_DEV_NONE;
792                 return 0;
793         }
794
795         /*
796          * Wait for the first D2H from device,i.e,signature update notification
797          */
798         start_jiffies = jiffies;
799         temp = ata_wait_register(hcr_base + HSTATUS, 0xFF, 0x10,
800                         500, jiffies_to_msecs(deadline - start_jiffies));
801
802         if ((temp & 0xFF) != 0x18) {
803                 ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
804                 *class = ATA_DEV_NONE;
805                 goto do_followup_srst;
806         } else {
807                 ata_port_printk(ap, KERN_INFO,
808                                 "Signature Update detected @ %d msecs\n",
809                                 jiffies_to_msecs(jiffies - start_jiffies));
810                 *class = sata_fsl_dev_classify(ap);
811                 return 0;
812         }
813
814 do_followup_srst:
815         /*
816          * request libATA to perform follow-up softreset
817          */
818         return -EAGAIN;
819
820 err:
821         return -EIO;
822 }
823
824 static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
825                                         unsigned long deadline)
826 {
827         struct ata_port *ap = link->ap;
828         struct sata_fsl_port_priv *pp = ap->private_data;
829         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
830         void __iomem *hcr_base = host_priv->hcr_base;
831         int pmp = sata_srst_pmp(link);
832         u32 temp;
833         struct ata_taskfile tf;
834         u8 *cfis;
835         u32 Serror;
836
837         DPRINTK("in xx_softreset\n");
838
839         if (ata_link_offline(link)) {
840                 DPRINTK("PHY reports no device\n");
841                 *class = ATA_DEV_NONE;
842                 return 0;
843         }
844
845         /*
846          * Send a device reset (SRST) explicitly on command slot #0
847          * Check : will the command queue (reg) be cleared during offlining ??
848          * Also we will be online only if Phy commn. has been established
849          * and device presence has been detected, therefore if we have
850          * reached here, we can send a command to the target device
851          */
852
853         DPRINTK("Sending SRST/device reset\n");
854
855         ata_tf_init(link->device, &tf);
856         cfis = (u8 *) &pp->cmdentry->cfis;
857
858         /* device reset/SRST is a control register update FIS, uses tag0 */
859         sata_fsl_setup_cmd_hdr_entry(pp, 0,
860                 SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
861
862         tf.ctl |= ATA_SRST;     /* setup SRST bit in taskfile control reg */
863         ata_tf_to_fis(&tf, pmp, 0, cfis);
864
865         DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
866                 cfis[0], cfis[1], cfis[2], cfis[3]);
867
868         /*
869          * Queue SRST command to the controller/device, ensure that no
870          * other commands are active on the controller/device
871          */
872
873         DPRINTK("@Softreset, CQ = 0x%x, CA = 0x%x, CC = 0x%x\n",
874                 ioread32(CQ + hcr_base),
875                 ioread32(CA + hcr_base), ioread32(CC + hcr_base));
876
877         iowrite32(0xFFFF, CC + hcr_base);
878         if (pmp != SATA_PMP_CTRL_PORT)
879                 iowrite32(pmp, CQPMP + hcr_base);
880         iowrite32(1, CQ + hcr_base);
881
882         temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
883         if (temp & 0x1) {
884                 ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n");
885
886                 DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
887                         ioread32(CQ + hcr_base),
888                         ioread32(CA + hcr_base), ioread32(CC + hcr_base));
889
890                 sata_fsl_scr_read(&ap->link, SCR_ERROR, &Serror);
891
892                 DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
893                 DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
894                 DPRINTK("Serror = 0x%x\n", Serror);
895                 goto err;
896         }
897
898         msleep(1);
899
900         /*
901          * SATA device enters reset state after receving a Control register
902          * FIS with SRST bit asserted and it awaits another H2D Control reg.
903          * FIS with SRST bit cleared, then the device does internal diags &
904          * initialization, followed by indicating it's initialization status
905          * using ATA signature D2H register FIS to the host controller.
906          */
907
908         sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
909                                       0, 0, 5);
910
911         tf.ctl &= ~ATA_SRST;    /* 2nd H2D Ctl. register FIS */
912         ata_tf_to_fis(&tf, pmp, 0, cfis);
913
914         if (pmp != SATA_PMP_CTRL_PORT)
915                 iowrite32(pmp, CQPMP + hcr_base);
916         iowrite32(1, CQ + hcr_base);
917         msleep(150);            /* ?? */
918
919         /*
920          * The above command would have signalled an interrupt on command
921          * complete, which needs special handling, by clearing the Nth
922          * command bit of the CCreg
923          */
924         iowrite32(0x01, CC + hcr_base); /* We know it will be cmd#0 always */
925
926         DPRINTK("SATA FSL : Now checking device signature\n");
927
928         *class = ATA_DEV_NONE;
929
930         /* Verify if SStatus indicates device presence */
931         if (ata_link_online(link)) {
932                 /*
933                  * if we are here, device presence has been detected,
934                  * 1st D2H FIS would have been received, but sfis in
935                  * command desc. is not updated, but signature register
936                  * would have been updated
937                  */
938
939                 *class = sata_fsl_dev_classify(ap);
940
941                 DPRINTK("class = %d\n", *class);
942                 VPRINTK("ccreg = 0x%x\n", ioread32(hcr_base + CC));
943                 VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
944         }
945
946         return 0;
947
948 err:
949         return -EIO;
950 }
951
952 static void sata_fsl_error_handler(struct ata_port *ap)
953 {
954
955         DPRINTK("in xx_error_handler\n");
956         sata_pmp_error_handler(ap);
957
958 }
959
960 static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
961 {
962         if (qc->flags & ATA_QCFLAG_FAILED)
963                 qc->err_mask |= AC_ERR_OTHER;
964
965         if (qc->err_mask) {
966                 /* make DMA engine forget about the failed command */
967
968         }
969 }
970
971 static void sata_fsl_error_intr(struct ata_port *ap)
972 {
973         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
974         void __iomem *hcr_base = host_priv->hcr_base;
975         u32 hstatus, dereg=0, cereg = 0, SError = 0;
976         unsigned int err_mask = 0, action = 0;
977         int freeze = 0, abort=0;
978         struct ata_link *link = NULL;
979         struct ata_queued_cmd *qc = NULL;
980         struct ata_eh_info *ehi;
981
982         hstatus = ioread32(hcr_base + HSTATUS);
983         cereg = ioread32(hcr_base + CE);
984
985         /* first, analyze and record host port events */
986         link = &ap->link;
987         ehi = &link->eh_info;
988         ata_ehi_clear_desc(ehi);
989
990         /*
991          * Handle & Clear SError
992          */
993
994         sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
995         if (unlikely(SError & 0xFFFF0000))
996                 sata_fsl_scr_write(&ap->link, SCR_ERROR, SError);
997
998         DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
999                 hstatus, cereg, ioread32(hcr_base + DE), SError);
1000
1001         /* handle fatal errors */
1002         if (hstatus & FATAL_ERROR_DECODE) {
1003                 ehi->err_mask |= AC_ERR_ATA_BUS;
1004                 ehi->action |= ATA_EH_SOFTRESET;
1005
1006                 freeze = 1;
1007         }
1008
1009         /* Handle SDB FIS receive & notify update */
1010         if (hstatus & INT_ON_SNOTIFY_UPDATE)
1011                 sata_async_notification(ap);
1012
1013         /* Handle PHYRDY change notification */
1014         if (hstatus & INT_ON_PHYRDY_CHG) {
1015                 DPRINTK("SATA FSL: PHYRDY change indication\n");
1016
1017                 /* Setup a soft-reset EH action */
1018                 ata_ehi_hotplugged(ehi);
1019                 ata_ehi_push_desc(ehi, "%s", "PHY RDY changed");
1020                 freeze = 1;
1021         }
1022
1023         /* handle single device errors */
1024         if (cereg) {
1025                 /*
1026                  * clear the command error, also clears queue to the device
1027                  * in error, and we can (re)issue commands to this device.
1028                  * When a device is in error all commands queued into the
1029                  * host controller and at the device are considered aborted
1030                  * and the queue for that device is stopped. Now, after
1031                  * clearing the device error, we can issue commands to the
1032                  * device to interrogate it to find the source of the error.
1033                  */
1034                 abort = 1;
1035
1036                 DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
1037                         ioread32(hcr_base + CE), ioread32(hcr_base + DE));
1038
1039                 /* find out the offending link and qc */
1040                 if (ap->nr_pmp_links) {
1041                         dereg = ioread32(hcr_base + DE);
1042                         iowrite32(dereg, hcr_base + DE);
1043                         iowrite32(cereg, hcr_base + CE);
1044
1045                         if (dereg < ap->nr_pmp_links) {
1046                                 link = &ap->pmp_link[dereg];
1047                                 ehi = &link->eh_info;
1048                                 qc = ata_qc_from_tag(ap, link->active_tag);
1049                                 /*
1050                                  * We should consider this as non fatal error,
1051                                  * and TF must be updated as done below.
1052                                  */
1053
1054                                 err_mask |= AC_ERR_DEV;
1055
1056                         } else {
1057                                 err_mask |= AC_ERR_HSM;
1058                                 action |= ATA_EH_HARDRESET;
1059                                 freeze = 1;
1060                         }
1061                 } else {
1062                         dereg = ioread32(hcr_base + DE);
1063                         iowrite32(dereg, hcr_base + DE);
1064                         iowrite32(cereg, hcr_base + CE);
1065
1066                         qc = ata_qc_from_tag(ap, link->active_tag);
1067                         /*
1068                          * We should consider this as non fatal error,
1069                          * and TF must be updated as done below.
1070                         */
1071                         err_mask |= AC_ERR_DEV;
1072                 }
1073         }
1074
1075         /* record error info */
1076         if (qc)
1077                 qc->err_mask |= err_mask;
1078         else
1079                 ehi->err_mask |= err_mask;
1080
1081         ehi->action |= action;
1082
1083         /* freeze or abort */
1084         if (freeze)
1085                 ata_port_freeze(ap);
1086         else if (abort) {
1087                 if (qc)
1088                         ata_link_abort(qc->dev->link);
1089                 else
1090                         ata_port_abort(ap);
1091         }
1092 }
1093
1094 static void sata_fsl_host_intr(struct ata_port *ap)
1095 {
1096         struct sata_fsl_host_priv *host_priv = ap->host->private_data;
1097         void __iomem *hcr_base = host_priv->hcr_base;
1098         u32 hstatus, qc_active = 0;
1099         struct ata_queued_cmd *qc;
1100         u32 SError;
1101
1102         hstatus = ioread32(hcr_base + HSTATUS);
1103
1104         sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
1105
1106         if (unlikely(SError & 0xFFFF0000)) {
1107                 DPRINTK("serror @host_intr : 0x%x\n", SError);
1108                 sata_fsl_error_intr(ap);
1109         }
1110
1111         if (unlikely(hstatus & INT_ON_ERROR)) {
1112                 DPRINTK("error interrupt!!\n");
1113                 sata_fsl_error_intr(ap);
1114                 return;
1115         }
1116
1117         /* Read command completed register */
1118         qc_active = ioread32(hcr_base + CC);
1119
1120         VPRINTK("Status of all queues :\n");
1121         VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
1122                 qc_active,
1123                 ioread32(hcr_base + CA),
1124                 ioread32(hcr_base + CE),
1125                 ioread32(hcr_base + CQ),
1126                 ap->qc_active);
1127
1128         if (qc_active & ap->qc_active) {
1129                 int i;
1130                 /* clear CC bit, this will also complete the interrupt */
1131                 iowrite32(qc_active, hcr_base + CC);
1132
1133                 DPRINTK("Status of all queues :\n");
1134                 DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
1135                         qc_active, ioread32(hcr_base + CA),
1136                         ioread32(hcr_base + CE));
1137
1138                 for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
1139                         if (qc_active & (1 << i)) {
1140                                 qc = ata_qc_from_tag(ap, i);
1141                                 if (qc) {
1142                                         ata_qc_complete(qc);
1143                                 }
1144                                 DPRINTK
1145                                     ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
1146                                      i, ioread32(hcr_base + CC),
1147                                      ioread32(hcr_base + CA));
1148                         }
1149                 }
1150                 return;
1151
1152         } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) {
1153                 iowrite32(1, hcr_base + CC);
1154                 qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
1155
1156                 DPRINTK("completing non-ncq cmd, CC=0x%x\n",
1157                          ioread32(hcr_base + CC));
1158
1159                 if (qc) {
1160                         ata_qc_complete(qc);
1161                 }
1162         } else {
1163                 /* Spurious Interrupt!! */
1164                 DPRINTK("spurious interrupt!!, CC = 0x%x\n",
1165                         ioread32(hcr_base + CC));
1166                 iowrite32(qc_active, hcr_base + CC);
1167                 return;
1168         }
1169 }
1170
1171 static irqreturn_t sata_fsl_interrupt(int irq, void *dev_instance)
1172 {
1173         struct ata_host *host = dev_instance;
1174         struct sata_fsl_host_priv *host_priv = host->private_data;
1175         void __iomem *hcr_base = host_priv->hcr_base;
1176         u32 interrupt_enables;
1177         unsigned handled = 0;
1178         struct ata_port *ap;
1179
1180         /* ack. any pending IRQs for this controller/port */
1181         interrupt_enables = ioread32(hcr_base + HSTATUS);
1182         interrupt_enables &= 0x3F;
1183
1184         DPRINTK("interrupt status 0x%x\n", interrupt_enables);
1185
1186         if (!interrupt_enables)
1187                 return IRQ_NONE;
1188
1189         spin_lock(&host->lock);
1190
1191         /* Assuming one port per host controller */
1192
1193         ap = host->ports[0];
1194         if (ap) {
1195                 sata_fsl_host_intr(ap);
1196         } else {
1197                 dev_printk(KERN_WARNING, host->dev,
1198                            "interrupt on disabled port 0\n");
1199         }
1200
1201         iowrite32(interrupt_enables, hcr_base + HSTATUS);
1202         handled = 1;
1203
1204         spin_unlock(&host->lock);
1205
1206         return IRQ_RETVAL(handled);
1207 }
1208
1209 /*
1210  * Multiple ports are represented by multiple SATA controllers with
1211  * one port per controller
1212  */
1213 static int sata_fsl_init_controller(struct ata_host *host)
1214 {
1215         struct sata_fsl_host_priv *host_priv = host->private_data;
1216         void __iomem *hcr_base = host_priv->hcr_base;
1217         u32 temp;
1218
1219         /*
1220          * NOTE : We cannot bring the controller online before setting
1221          * the CHBA, hence main controller initialization is done as
1222          * part of the port_start() callback
1223          */
1224
1225         /* ack. any pending IRQs for this controller/port */
1226         temp = ioread32(hcr_base + HSTATUS);
1227         if (temp & 0x3F)
1228                 iowrite32((temp & 0x3F), hcr_base + HSTATUS);
1229
1230         /* Keep interrupts disabled on the controller */
1231         temp = ioread32(hcr_base + HCONTROL);
1232         iowrite32((temp & ~0x3F), hcr_base + HCONTROL);
1233
1234         /* Disable interrupt coalescing control(icc), for the moment */
1235         DPRINTK("icc = 0x%x\n", ioread32(hcr_base + ICC));
1236         iowrite32(0x01000000, hcr_base + ICC);
1237
1238         /* clear error registers, SError is cleared by libATA  */
1239         iowrite32(0x00000FFFF, hcr_base + CE);
1240         iowrite32(0x00000FFFF, hcr_base + DE);
1241
1242         /*
1243          * host controller will be brought on-line, during xx_port_start()
1244          * callback, that should also initiate the OOB, COMINIT sequence
1245          */
1246
1247         DPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
1248         DPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
1249
1250         return 0;
1251 }
1252
1253 /*
1254  * scsi mid-layer and libata interface structures
1255  */
1256 static struct scsi_host_template sata_fsl_sht = {
1257         ATA_NCQ_SHT("sata_fsl"),
1258         .can_queue = SATA_FSL_QUEUE_DEPTH,
1259         .sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
1260         .dma_boundary = ATA_DMA_BOUNDARY,
1261 };
1262
1263 static struct ata_port_operations sata_fsl_ops = {
1264         .inherits               = &sata_pmp_port_ops,
1265
1266         .qc_defer = ata_std_qc_defer,
1267         .qc_prep = sata_fsl_qc_prep,
1268         .qc_issue = sata_fsl_qc_issue,
1269         .qc_fill_rtf = sata_fsl_qc_fill_rtf,
1270
1271         .scr_read = sata_fsl_scr_read,
1272         .scr_write = sata_fsl_scr_write,
1273
1274         .freeze = sata_fsl_freeze,
1275         .thaw = sata_fsl_thaw,
1276         .softreset = sata_fsl_softreset,
1277         .hardreset = sata_fsl_hardreset,
1278         .pmp_softreset = sata_fsl_softreset,
1279         .error_handler = sata_fsl_error_handler,
1280         .post_internal_cmd = sata_fsl_post_internal_cmd,
1281
1282         .port_start = sata_fsl_port_start,
1283         .port_stop = sata_fsl_port_stop,
1284
1285         .pmp_attach = sata_fsl_pmp_attach,
1286         .pmp_detach = sata_fsl_pmp_detach,
1287 };
1288
1289 static const struct ata_port_info sata_fsl_port_info[] = {
1290         {
1291          .flags = SATA_FSL_HOST_FLAGS,
1292          .pio_mask = ATA_PIO4,
1293          .udma_mask = ATA_UDMA6,
1294          .port_ops = &sata_fsl_ops,
1295          },
1296 };
1297
1298 static int sata_fsl_probe(struct of_device *ofdev,
1299                         const struct of_device_id *match)
1300 {
1301         int retval = -ENXIO;
1302         void __iomem *hcr_base = NULL;
1303         void __iomem *ssr_base = NULL;
1304         void __iomem *csr_base = NULL;
1305         struct sata_fsl_host_priv *host_priv = NULL;
1306         int irq;
1307         struct ata_host *host;
1308
1309         struct ata_port_info pi = sata_fsl_port_info[0];
1310         const struct ata_port_info *ppi[] = { &pi, NULL };
1311
1312         dev_printk(KERN_INFO, &ofdev->dev,
1313                    "Sata FSL Platform/CSB Driver init\n");
1314
1315         hcr_base = of_iomap(ofdev->node, 0);
1316         if (!hcr_base)
1317                 goto error_exit_with_cleanup;
1318
1319         ssr_base = hcr_base + 0x100;
1320         csr_base = hcr_base + 0x140;
1321
1322         DPRINTK("@reset i/o = 0x%x\n", ioread32(csr_base + TRANSCFG));
1323         DPRINTK("sizeof(cmd_desc) = %d\n", sizeof(struct command_desc));
1324         DPRINTK("sizeof(#define cmd_desc) = %d\n", SATA_FSL_CMD_DESC_SIZE);
1325
1326         host_priv = kzalloc(sizeof(struct sata_fsl_host_priv), GFP_KERNEL);
1327         if (!host_priv)
1328                 goto error_exit_with_cleanup;
1329
1330         host_priv->hcr_base = hcr_base;
1331         host_priv->ssr_base = ssr_base;
1332         host_priv->csr_base = csr_base;
1333
1334         irq = irq_of_parse_and_map(ofdev->node, 0);
1335         if (irq < 0) {
1336                 dev_printk(KERN_ERR, &ofdev->dev, "invalid irq from platform\n");
1337                 goto error_exit_with_cleanup;
1338         }
1339         host_priv->irq = irq;
1340
1341         /* allocate host structure */
1342         host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_FSL_MAX_PORTS);
1343
1344         /* host->iomap is not used currently */
1345         host->private_data = host_priv;
1346
1347         /* initialize host controller */
1348         sata_fsl_init_controller(host);
1349
1350         /*
1351          * Now, register with libATA core, this will also initiate the
1352          * device discovery process, invoking our port_start() handler &
1353          * error_handler() to execute a dummy Softreset EH session
1354          */
1355         ata_host_activate(host, irq, sata_fsl_interrupt, SATA_FSL_IRQ_FLAG,
1356                           &sata_fsl_sht);
1357
1358         dev_set_drvdata(&ofdev->dev, host);
1359
1360         return 0;
1361
1362 error_exit_with_cleanup:
1363
1364         if (hcr_base)
1365                 iounmap(hcr_base);
1366         if (host_priv)
1367                 kfree(host_priv);
1368
1369         return retval;
1370 }
1371
1372 static int sata_fsl_remove(struct of_device *ofdev)
1373 {
1374         struct ata_host *host = dev_get_drvdata(&ofdev->dev);
1375         struct sata_fsl_host_priv *host_priv = host->private_data;
1376
1377         ata_host_detach(host);
1378
1379         dev_set_drvdata(&ofdev->dev, NULL);
1380
1381         irq_dispose_mapping(host_priv->irq);
1382         iounmap(host_priv->hcr_base);
1383         kfree(host_priv);
1384
1385         return 0;
1386 }
1387
1388 #ifdef CONFIG_PM
1389 static int sata_fsl_suspend(struct of_device *op, pm_message_t state)
1390 {
1391         struct ata_host *host = dev_get_drvdata(&op->dev);
1392         return ata_host_suspend(host, state);
1393 }
1394
1395 static int sata_fsl_resume(struct of_device *op)
1396 {
1397         struct ata_host *host = dev_get_drvdata(&op->dev);
1398         struct sata_fsl_host_priv *host_priv = host->private_data;
1399         int ret;
1400         void __iomem *hcr_base = host_priv->hcr_base;
1401         struct ata_port *ap = host->ports[0];
1402         struct sata_fsl_port_priv *pp = ap->private_data;
1403
1404         ret = sata_fsl_init_controller(host);
1405         if (ret) {
1406                 dev_printk(KERN_ERR, &op->dev,
1407                         "Error initialize hardware\n");
1408                 return ret;
1409         }
1410
1411         /* Recovery the CHBA register in host controller cmd register set */
1412         iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
1413
1414         ata_host_resume(host);
1415         return 0;
1416 }
1417 #endif
1418
1419 static struct of_device_id fsl_sata_match[] = {
1420         {
1421                 .compatible = "fsl,pq-sata",
1422         },
1423         {},
1424 };
1425
1426 MODULE_DEVICE_TABLE(of, fsl_sata_match);
1427
1428 static struct of_platform_driver fsl_sata_driver = {
1429         .name           = "fsl-sata",
1430         .match_table    = fsl_sata_match,
1431         .probe          = sata_fsl_probe,
1432         .remove         = sata_fsl_remove,
1433 #ifdef CONFIG_PM
1434         .suspend        = sata_fsl_suspend,
1435         .resume         = sata_fsl_resume,
1436 #endif
1437 };
1438
1439 static int __init sata_fsl_init(void)
1440 {
1441         of_register_platform_driver(&fsl_sata_driver);
1442         return 0;
1443 }
1444
1445 static void __exit sata_fsl_exit(void)
1446 {
1447         of_unregister_platform_driver(&fsl_sata_driver);
1448 }
1449
1450 MODULE_LICENSE("GPL");
1451 MODULE_AUTHOR("Ashish Kalra, Freescale Semiconductor");
1452 MODULE_DESCRIPTION("Freescale 3.0Gbps SATA controller low level driver");
1453 MODULE_VERSION("1.10");
1454
1455 module_init(sata_fsl_init);
1456 module_exit(sata_fsl_exit);