ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist.
[linux-3.10.git] / drivers / acpi / sleep.c
1 /*
2  * sleep.c - ACPI sleep support.
3  *
4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
6  * Copyright (c) 2000-2003 Patrick Mochel
7  * Copyright (c) 2003 Open Source Development Lab
8  *
9  * This file is released under the GPLv2.
10  *
11  */
12
13 #include <linux/delay.h>
14 #include <linux/irq.h>
15 #include <linux/dmi.h>
16 #include <linux/device.h>
17 #include <linux/suspend.h>
18 #include <linux/reboot.h>
19 #include <linux/acpi.h>
20
21 #include <asm/io.h>
22
23 #include <acpi/acpi_bus.h>
24 #include <acpi/acpi_drivers.h>
25
26 #include "internal.h"
27 #include "sleep.h"
28
29 static u8 sleep_states[ACPI_S_STATE_COUNT];
30
31 static void acpi_sleep_tts_switch(u32 acpi_state)
32 {
33         union acpi_object in_arg = { ACPI_TYPE_INTEGER };
34         struct acpi_object_list arg_list = { 1, &in_arg };
35         acpi_status status = AE_OK;
36
37         in_arg.integer.value = acpi_state;
38         status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
39         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
40                 /*
41                  * OS can't evaluate the _TTS object correctly. Some warning
42                  * message will be printed. But it won't break anything.
43                  */
44                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
45         }
46 }
47
48 static int tts_notify_reboot(struct notifier_block *this,
49                         unsigned long code, void *x)
50 {
51         acpi_sleep_tts_switch(ACPI_STATE_S5);
52         return NOTIFY_DONE;
53 }
54
55 static struct notifier_block tts_notifier = {
56         .notifier_call  = tts_notify_reboot,
57         .next           = NULL,
58         .priority       = 0,
59 };
60
61 static int acpi_sleep_prepare(u32 acpi_state)
62 {
63 #ifdef CONFIG_ACPI_SLEEP
64         /* do we have a wakeup address for S2 and S3? */
65         if (acpi_state == ACPI_STATE_S3) {
66                 if (!acpi_wakeup_address) {
67                         return -EFAULT;
68                 }
69                 acpi_set_firmware_waking_vector(
70                                 (acpi_physical_address)acpi_wakeup_address);
71
72         }
73         ACPI_FLUSH_CPU_CACHE();
74 #endif
75         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
76                 acpi_state);
77         acpi_enable_wakeup_devices(acpi_state);
78         acpi_enter_sleep_state_prep(acpi_state);
79         return 0;
80 }
81
82 #ifdef CONFIG_ACPI_SLEEP
83 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
84
85 /*
86  * The ACPI specification wants us to save NVS memory regions during hibernation
87  * and to restore them during the subsequent resume.  Windows does that also for
88  * suspend to RAM.  However, it is known that this mechanism does not work on
89  * all machines, so we allow the user to disable it with the help of the
90  * 'acpi_sleep=nonvs' kernel command line option.
91  */
92 static bool nvs_nosave;
93
94 void __init acpi_nvs_nosave(void)
95 {
96         nvs_nosave = true;
97 }
98
99 /*
100  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
101  * user to request that behavior by using the 'acpi_old_suspend_ordering'
102  * kernel command line option that causes the following variable to be set.
103  */
104 static bool old_suspend_ordering;
105
106 void __init acpi_old_suspend_ordering(void)
107 {
108         old_suspend_ordering = true;
109 }
110
111 /**
112  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
113  */
114 static int acpi_pm_freeze(void)
115 {
116         acpi_disable_all_gpes();
117         acpi_os_wait_events_complete(NULL);
118         acpi_ec_block_transactions();
119         return 0;
120 }
121
122 /**
123  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
124  */
125 static int acpi_pm_pre_suspend(void)
126 {
127         acpi_pm_freeze();
128         return suspend_nvs_save();
129 }
130
131 /**
132  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
133  *
134  *      If necessary, set the firmware waking vector and do arch-specific
135  *      nastiness to get the wakeup code to the waking vector.
136  */
137 static int __acpi_pm_prepare(void)
138 {
139         int error = acpi_sleep_prepare(acpi_target_sleep_state);
140         if (error)
141                 acpi_target_sleep_state = ACPI_STATE_S0;
142
143         return error;
144 }
145
146 /**
147  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
148  *              state and disable the GPEs.
149  */
150 static int acpi_pm_prepare(void)
151 {
152         int error = __acpi_pm_prepare();
153         if (!error)
154                 error = acpi_pm_pre_suspend();
155
156         return error;
157 }
158
159 /**
160  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
161  *
162  *      This is called after we wake back up (or if entering the sleep state
163  *      failed).
164  */
165 static void acpi_pm_finish(void)
166 {
167         u32 acpi_state = acpi_target_sleep_state;
168
169         acpi_ec_unblock_transactions();
170         suspend_nvs_free();
171
172         if (acpi_state == ACPI_STATE_S0)
173                 return;
174
175         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
176                 acpi_state);
177         acpi_disable_wakeup_devices(acpi_state);
178         acpi_leave_sleep_state(acpi_state);
179
180         /* reset firmware waking vector */
181         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
182
183         acpi_target_sleep_state = ACPI_STATE_S0;
184 }
185
186 /**
187  *      acpi_pm_end - Finish up suspend sequence.
188  */
189 static void acpi_pm_end(void)
190 {
191         /*
192          * This is necessary in case acpi_pm_finish() is not called during a
193          * failing transition to a sleep state.
194          */
195         acpi_target_sleep_state = ACPI_STATE_S0;
196         acpi_sleep_tts_switch(acpi_target_sleep_state);
197 }
198 #else /* !CONFIG_ACPI_SLEEP */
199 #define acpi_target_sleep_state ACPI_STATE_S0
200 #endif /* CONFIG_ACPI_SLEEP */
201
202 #ifdef CONFIG_SUSPEND
203 static u32 acpi_suspend_states[] = {
204         [PM_SUSPEND_ON] = ACPI_STATE_S0,
205         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
206         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
207         [PM_SUSPEND_MAX] = ACPI_STATE_S5
208 };
209
210 /**
211  *      acpi_suspend_begin - Set the target system sleep state to the state
212  *              associated with given @pm_state, if supported.
213  */
214 static int acpi_suspend_begin(suspend_state_t pm_state)
215 {
216         u32 acpi_state = acpi_suspend_states[pm_state];
217         int error = 0;
218
219         error = nvs_nosave ? 0 : suspend_nvs_alloc();
220         if (error)
221                 return error;
222
223         if (sleep_states[acpi_state]) {
224                 acpi_target_sleep_state = acpi_state;
225                 acpi_sleep_tts_switch(acpi_target_sleep_state);
226         } else {
227                 printk(KERN_ERR "ACPI does not support this state: %d\n",
228                         pm_state);
229                 error = -ENOSYS;
230         }
231         return error;
232 }
233
234 /**
235  *      acpi_suspend_enter - Actually enter a sleep state.
236  *      @pm_state: ignored
237  *
238  *      Flush caches and go to sleep. For STR we have to call arch-specific
239  *      assembly, which in turn call acpi_enter_sleep_state().
240  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
241  */
242 static int acpi_suspend_enter(suspend_state_t pm_state)
243 {
244         acpi_status status = AE_OK;
245         u32 acpi_state = acpi_target_sleep_state;
246         int error;
247
248         ACPI_FLUSH_CPU_CACHE();
249
250         switch (acpi_state) {
251         case ACPI_STATE_S1:
252                 barrier();
253                 status = acpi_enter_sleep_state(acpi_state);
254                 break;
255
256         case ACPI_STATE_S3:
257                 error = acpi_suspend_lowlevel();
258                 if (error)
259                         return error;
260                 pr_info(PREFIX "Low-level resume complete\n");
261                 break;
262         }
263
264         /* This violates the spec but is required for bug compatibility. */
265         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
266
267         /* Reprogram control registers and execute _BFS */
268         acpi_leave_sleep_state_prep(acpi_state);
269
270         /* ACPI 3.0 specs (P62) says that it's the responsibility
271          * of the OSPM to clear the status bit [ implying that the
272          * POWER_BUTTON event should not reach userspace ]
273          */
274         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3))
275                 acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
276
277         /*
278          * Disable and clear GPE status before interrupt is enabled. Some GPEs
279          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
280          * acpi_leave_sleep_state will reenable specific GPEs later
281          */
282         acpi_disable_all_gpes();
283         /* Allow EC transactions to happen. */
284         acpi_ec_unblock_transactions_early();
285
286         suspend_nvs_restore();
287
288         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
289 }
290
291 static int acpi_suspend_state_valid(suspend_state_t pm_state)
292 {
293         u32 acpi_state;
294
295         switch (pm_state) {
296         case PM_SUSPEND_ON:
297         case PM_SUSPEND_STANDBY:
298         case PM_SUSPEND_MEM:
299                 acpi_state = acpi_suspend_states[pm_state];
300
301                 return sleep_states[acpi_state];
302         default:
303                 return 0;
304         }
305 }
306
307 static const struct platform_suspend_ops acpi_suspend_ops = {
308         .valid = acpi_suspend_state_valid,
309         .begin = acpi_suspend_begin,
310         .prepare_late = acpi_pm_prepare,
311         .enter = acpi_suspend_enter,
312         .wake = acpi_pm_finish,
313         .end = acpi_pm_end,
314 };
315
316 /**
317  *      acpi_suspend_begin_old - Set the target system sleep state to the
318  *              state associated with given @pm_state, if supported, and
319  *              execute the _PTS control method.  This function is used if the
320  *              pre-ACPI 2.0 suspend ordering has been requested.
321  */
322 static int acpi_suspend_begin_old(suspend_state_t pm_state)
323 {
324         int error = acpi_suspend_begin(pm_state);
325         if (!error)
326                 error = __acpi_pm_prepare();
327
328         return error;
329 }
330
331 /*
332  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
333  * been requested.
334  */
335 static const struct platform_suspend_ops acpi_suspend_ops_old = {
336         .valid = acpi_suspend_state_valid,
337         .begin = acpi_suspend_begin_old,
338         .prepare_late = acpi_pm_pre_suspend,
339         .enter = acpi_suspend_enter,
340         .wake = acpi_pm_finish,
341         .end = acpi_pm_end,
342         .recover = acpi_pm_finish,
343 };
344
345 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
346 {
347         old_suspend_ordering = true;
348         return 0;
349 }
350
351 static int __init init_nvs_nosave(const struct dmi_system_id *d)
352 {
353         acpi_nvs_nosave();
354         return 0;
355 }
356
357 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
358         {
359         .callback = init_old_suspend_ordering,
360         .ident = "Abit KN9 (nForce4 variant)",
361         .matches = {
362                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
363                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
364                 },
365         },
366         {
367         .callback = init_old_suspend_ordering,
368         .ident = "HP xw4600 Workstation",
369         .matches = {
370                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
371                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
372                 },
373         },
374         {
375         .callback = init_old_suspend_ordering,
376         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
377         .matches = {
378                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
379                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
380                 },
381         },
382         {
383         .callback = init_old_suspend_ordering,
384         .ident = "Panasonic CF51-2L",
385         .matches = {
386                 DMI_MATCH(DMI_BOARD_VENDOR,
387                                 "Matsushita Electric Industrial Co.,Ltd."),
388                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
389                 },
390         },
391         {
392         .callback = init_nvs_nosave,
393         .ident = "Sony Vaio VGN-FW21E",
394         .matches = {
395                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
396                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
397                 },
398         },
399         {
400         .callback = init_nvs_nosave,
401         .ident = "Sony Vaio VGN-SR11M",
402         .matches = {
403                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
404                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
405                 },
406         },
407         {
408         .callback = init_nvs_nosave,
409         .ident = "Everex StepNote Series",
410         .matches = {
411                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
412                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
413                 },
414         },
415         {
416         .callback = init_nvs_nosave,
417         .ident = "Sony Vaio VPCEB1Z1E",
418         .matches = {
419                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
420                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
421                 },
422         },
423         {
424         .callback = init_nvs_nosave,
425         .ident = "Sony Vaio VGN-NW130D",
426         .matches = {
427                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
428                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
429                 },
430         },
431         {
432         .callback = init_nvs_nosave,
433         .ident = "Averatec AV1020-ED2",
434         .matches = {
435                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
436                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
437                 },
438         },
439         {
440         .callback = init_old_suspend_ordering,
441         .ident = "Asus A8N-SLI DELUXE",
442         .matches = {
443                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
444                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
445                 },
446         },
447         {
448         .callback = init_old_suspend_ordering,
449         .ident = "Asus A8N-SLI Premium",
450         .matches = {
451                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
452                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
453                 },
454         },
455         {
456         .callback = init_nvs_nosave,
457         .ident = "Sony Vaio VGN-SR26GN_P",
458         .matches = {
459                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
460                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
461                 },
462         },
463         {
464         .callback = init_nvs_nosave,
465         .ident = "Sony Vaio VGN-FW520F",
466         .matches = {
467                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
468                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
469                 },
470         },
471         {},
472 };
473 #endif /* CONFIG_SUSPEND */
474
475 #ifdef CONFIG_HIBERNATION
476 static unsigned long s4_hardware_signature;
477 static struct acpi_table_facs *facs;
478 static bool nosigcheck;
479
480 void __init acpi_no_s4_hw_signature(void)
481 {
482         nosigcheck = true;
483 }
484
485 static int acpi_hibernation_begin(void)
486 {
487         int error;
488
489         error = nvs_nosave ? 0 : suspend_nvs_alloc();
490         if (!error) {
491                 acpi_target_sleep_state = ACPI_STATE_S4;
492                 acpi_sleep_tts_switch(acpi_target_sleep_state);
493         }
494
495         return error;
496 }
497
498 static int acpi_hibernation_enter(void)
499 {
500         acpi_status status = AE_OK;
501
502         ACPI_FLUSH_CPU_CACHE();
503
504         /* This shouldn't return.  If it returns, we have a problem */
505         status = acpi_enter_sleep_state(ACPI_STATE_S4);
506         /* Reprogram control registers and execute _BFS */
507         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
508
509         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
510 }
511
512 static void acpi_hibernation_leave(void)
513 {
514         /*
515          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
516          * enable it here.
517          */
518         acpi_enable();
519         /* Reprogram control registers and execute _BFS */
520         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
521         /* Check the hardware signature */
522         if (facs && s4_hardware_signature != facs->hardware_signature) {
523                 printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
524                         "cannot resume!\n");
525                 panic("ACPI S4 hardware signature mismatch");
526         }
527         /* Restore the NVS memory area */
528         suspend_nvs_restore();
529         /* Allow EC transactions to happen. */
530         acpi_ec_unblock_transactions_early();
531 }
532
533 static void acpi_pm_thaw(void)
534 {
535         acpi_ec_unblock_transactions();
536         acpi_enable_all_runtime_gpes();
537 }
538
539 static const struct platform_hibernation_ops acpi_hibernation_ops = {
540         .begin = acpi_hibernation_begin,
541         .end = acpi_pm_end,
542         .pre_snapshot = acpi_pm_prepare,
543         .finish = acpi_pm_finish,
544         .prepare = acpi_pm_prepare,
545         .enter = acpi_hibernation_enter,
546         .leave = acpi_hibernation_leave,
547         .pre_restore = acpi_pm_freeze,
548         .restore_cleanup = acpi_pm_thaw,
549 };
550
551 /**
552  *      acpi_hibernation_begin_old - Set the target system sleep state to
553  *              ACPI_STATE_S4 and execute the _PTS control method.  This
554  *              function is used if the pre-ACPI 2.0 suspend ordering has been
555  *              requested.
556  */
557 static int acpi_hibernation_begin_old(void)
558 {
559         int error;
560         /*
561          * The _TTS object should always be evaluated before the _PTS object.
562          * When the old_suspended_ordering is true, the _PTS object is
563          * evaluated in the acpi_sleep_prepare.
564          */
565         acpi_sleep_tts_switch(ACPI_STATE_S4);
566
567         error = acpi_sleep_prepare(ACPI_STATE_S4);
568
569         if (!error) {
570                 if (!nvs_nosave)
571                         error = suspend_nvs_alloc();
572                 if (!error)
573                         acpi_target_sleep_state = ACPI_STATE_S4;
574         }
575         return error;
576 }
577
578 /*
579  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
580  * been requested.
581  */
582 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
583         .begin = acpi_hibernation_begin_old,
584         .end = acpi_pm_end,
585         .pre_snapshot = acpi_pm_pre_suspend,
586         .prepare = acpi_pm_freeze,
587         .finish = acpi_pm_finish,
588         .enter = acpi_hibernation_enter,
589         .leave = acpi_hibernation_leave,
590         .pre_restore = acpi_pm_freeze,
591         .restore_cleanup = acpi_pm_thaw,
592         .recover = acpi_pm_finish,
593 };
594 #endif /* CONFIG_HIBERNATION */
595
596 int acpi_suspend(u32 acpi_state)
597 {
598         suspend_state_t states[] = {
599                 [1] = PM_SUSPEND_STANDBY,
600                 [3] = PM_SUSPEND_MEM,
601                 [5] = PM_SUSPEND_MAX
602         };
603
604         if (acpi_state < 6 && states[acpi_state])
605                 return pm_suspend(states[acpi_state]);
606         if (acpi_state == 4)
607                 return hibernate();
608         return -EINVAL;
609 }
610
611 #ifdef CONFIG_PM
612 /**
613  *      acpi_pm_device_sleep_state - return preferred power state of ACPI device
614  *              in the system sleep state given by %acpi_target_sleep_state
615  *      @dev: device to examine; its driver model wakeup flags control
616  *              whether it should be able to wake up the system
617  *      @d_min_p: used to store the upper limit of allowed states range
618  *      Return value: preferred power state of the device on success, -ENODEV on
619  *              failure (ie. if there's no 'struct acpi_device' for @dev)
620  *
621  *      Find the lowest power (highest number) ACPI device power state that
622  *      device @dev can be in while the system is in the sleep state represented
623  *      by %acpi_target_sleep_state.  If @wake is nonzero, the device should be
624  *      able to wake up the system from this sleep state.  If @d_min_p is set,
625  *      the highest power (lowest number) device power state of @dev allowed
626  *      in this system sleep state is stored at the location pointed to by it.
627  *
628  *      The caller must ensure that @dev is valid before using this function.
629  *      The caller is also responsible for figuring out if the device is
630  *      supposed to be able to wake up the system and passing this information
631  *      via @wake.
632  */
633
634 int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p)
635 {
636         acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
637         struct acpi_device *adev;
638         char acpi_method[] = "_SxD";
639         unsigned long long d_min, d_max;
640
641         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
642                 printk(KERN_DEBUG "ACPI handle has no context!\n");
643                 return -ENODEV;
644         }
645
646         acpi_method[2] = '0' + acpi_target_sleep_state;
647         /*
648          * If the sleep state is S0, we will return D3, but if the device has
649          * _S0W, we will use the value from _S0W
650          */
651         d_min = ACPI_STATE_D0;
652         d_max = ACPI_STATE_D3;
653
654         /*
655          * If present, _SxD methods return the minimum D-state (highest power
656          * state) we can use for the corresponding S-states.  Otherwise, the
657          * minimum D-state is D0 (ACPI 3.x).
658          *
659          * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
660          * provided -- that's our fault recovery, we ignore retval.
661          */
662         if (acpi_target_sleep_state > ACPI_STATE_S0)
663                 acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
664
665         /*
666          * If _PRW says we can wake up the system from the target sleep state,
667          * the D-state returned by _SxD is sufficient for that (we assume a
668          * wakeup-aware driver if wake is set).  Still, if _SxW exists
669          * (ACPI 3.x), it should return the maximum (lowest power) D-state that
670          * can wake the system.  _S0W may be valid, too.
671          */
672         if (acpi_target_sleep_state == ACPI_STATE_S0 ||
673             (device_may_wakeup(dev) &&
674              adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
675                 acpi_status status;
676
677                 acpi_method[3] = 'W';
678                 status = acpi_evaluate_integer(handle, acpi_method, NULL,
679                                                 &d_max);
680                 if (ACPI_FAILURE(status)) {
681                         if (acpi_target_sleep_state != ACPI_STATE_S0 ||
682                             status != AE_NOT_FOUND)
683                                 d_max = d_min;
684                 } else if (d_max < d_min) {
685                         /* Warn the user of the broken DSDT */
686                         printk(KERN_WARNING "ACPI: Wrong value from %s\n",
687                                 acpi_method);
688                         /* Sanitize it */
689                         d_min = d_max;
690                 }
691         }
692
693         if (d_min_p)
694                 *d_min_p = d_min;
695         return d_max;
696 }
697 #endif /* CONFIG_PM */
698
699 #ifdef CONFIG_PM_SLEEP
700 /**
701  *      acpi_pm_device_sleep_wake - enable or disable the system wake-up
702  *                                  capability of given device
703  *      @dev: device to handle
704  *      @enable: 'true' - enable, 'false' - disable the wake-up capability
705  */
706 int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
707 {
708         acpi_handle handle;
709         struct acpi_device *adev;
710         int error;
711
712         if (!device_can_wakeup(dev))
713                 return -EINVAL;
714
715         handle = DEVICE_ACPI_HANDLE(dev);
716         if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
717                 dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__);
718                 return -ENODEV;
719         }
720
721         error = enable ?
722                 acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
723                 acpi_disable_wakeup_device_power(adev);
724         if (!error)
725                 dev_info(dev, "wake-up capability %s by ACPI\n",
726                                 enable ? "enabled" : "disabled");
727
728         return error;
729 }
730 #endif  /* CONFIG_PM_SLEEP */
731
732 static void acpi_power_off_prepare(void)
733 {
734         /* Prepare to power off the system */
735         acpi_sleep_prepare(ACPI_STATE_S5);
736         acpi_disable_all_gpes();
737 }
738
739 static void acpi_power_off(void)
740 {
741         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
742         printk(KERN_DEBUG "%s called\n", __func__);
743         local_irq_disable();
744         acpi_enter_sleep_state(ACPI_STATE_S5);
745 }
746
747 /*
748  * ACPI 2.0 created the optional _GTS and _BFS,
749  * but industry adoption has been neither rapid nor broad.
750  *
751  * Linux gets into trouble when it executes poorly validated
752  * paths through the BIOS, so disable _GTS and _BFS by default,
753  * but do speak up and offer the option to enable them.
754  */
755 static void __init acpi_gts_bfs_check(void)
756 {
757         acpi_handle dummy;
758
759         if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
760         {
761                 printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
762                 printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
763                         "please notify linux-acpi@vger.kernel.org\n");
764         }
765         if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
766         {
767                 printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
768                 printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
769                         "please notify linux-acpi@vger.kernel.org\n");
770         }
771 }
772
773 int __init acpi_sleep_init(void)
774 {
775         acpi_status status;
776         u8 type_a, type_b;
777 #ifdef CONFIG_SUSPEND
778         int i = 0;
779
780         dmi_check_system(acpisleep_dmi_table);
781 #endif
782
783         if (acpi_disabled)
784                 return 0;
785
786         sleep_states[ACPI_STATE_S0] = 1;
787         printk(KERN_INFO PREFIX "(supports S0");
788
789 #ifdef CONFIG_SUSPEND
790         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
791                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
792                 if (ACPI_SUCCESS(status)) {
793                         sleep_states[i] = 1;
794                         printk(" S%d", i);
795                 }
796         }
797
798         suspend_set_ops(old_suspend_ordering ?
799                 &acpi_suspend_ops_old : &acpi_suspend_ops);
800 #endif
801
802 #ifdef CONFIG_HIBERNATION
803         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
804         if (ACPI_SUCCESS(status)) {
805                 hibernation_set_ops(old_suspend_ordering ?
806                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
807                 sleep_states[ACPI_STATE_S4] = 1;
808                 printk(" S4");
809                 if (!nosigcheck) {
810                         acpi_get_table(ACPI_SIG_FACS, 1,
811                                 (struct acpi_table_header **)&facs);
812                         if (facs)
813                                 s4_hardware_signature =
814                                         facs->hardware_signature;
815                 }
816         }
817 #endif
818         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
819         if (ACPI_SUCCESS(status)) {
820                 sleep_states[ACPI_STATE_S5] = 1;
821                 printk(" S5");
822                 pm_power_off_prepare = acpi_power_off_prepare;
823                 pm_power_off = acpi_power_off;
824         }
825         printk(")\n");
826         /*
827          * Register the tts_notifier to reboot notifier list so that the _TTS
828          * object can also be evaluated when the system enters S5.
829          */
830         register_reboot_notifier(&tts_notifier);
831         acpi_gts_bfs_check();
832         return 0;
833 }