]> nv-tegra.nvidia Code Review - linux-3.10.git/blob - arch/powerpc/boot/dts/p1021rdb.dtsi
um: Add arch/x86/um to MAINTAINERS
[linux-3.10.git] / arch / powerpc / boot / dts / p1021rdb.dtsi
1 /*
2  * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
3  *
4  * Copyright 2011 Freescale Semiconductor Inc.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *     * Redistributions of source code must retain the above copyright
9  *       notice, this list of conditions and the following disclaimer.
10  *     * Redistributions in binary form must reproduce the above copyright
11  *       notice, this list of conditions and the following disclaimer in the
12  *       documentation and/or other materials provided with the distribution.
13  *     * Neither the name of Freescale Semiconductor nor the
14  *       names of its contributors may be used to endorse or promote products
15  *       derived from this software without specific prior written permission.
16  *
17  *
18  * ALTERNATIVELY, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") as published by the Free Software
20  * Foundation, either version 2 of that License or (at your option) any
21  * later version.
22  *
23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
34
35 &lbc {
36         nor@0,0 {
37                 #address-cells = <1>;
38                 #size-cells = <1>;
39                 compatible = "cfi-flash";
40                 reg = <0x0 0x0 0x1000000>;
41                 bank-width = <2>;
42                 device-width = <1>;
43
44                 partition@0 {
45                         /* This location must not be altered  */
46                         /* 256KB for Vitesse 7385 Switch firmware */
47                         reg = <0x0 0x00040000>;
48                         label = "NOR Vitesse-7385 Firmware";
49                         read-only;
50                 };
51
52                 partition@40000 {
53                         /* 256KB for DTB Image */
54                         reg = <0x00040000 0x00040000>;
55                         label = "NOR DTB Image";
56                 };
57
58                 partition@80000 {
59                         /* 3.5 MB for Linux Kernel Image */
60                         reg = <0x00080000 0x00380000>;
61                         label = "NOR Linux Kernel Image";
62                 };
63
64                 partition@400000 {
65                         /* 11MB for JFFS2 based Root file System */
66                         reg = <0x00400000 0x00b00000>;
67                         label = "NOR JFFS2 Root File System";
68                 };
69
70                 partition@f00000 {
71                         /* This location must not be altered  */
72                         /* 512KB for u-boot Bootloader Image */
73                         /* 512KB for u-boot Environment Variables */
74                         reg = <0x00f00000 0x00100000>;
75                         label = "NOR U-Boot Image";
76                 };
77         };
78
79         nand@1,0 {
80                 #address-cells = <1>;
81                 #size-cells = <1>;
82                 compatible = "fsl,p1021-fcm-nand",
83                              "fsl,elbc-fcm-nand";
84                 reg = <0x1 0x0 0x40000>;
85
86                 partition@0 {
87                         /* This location must not be altered  */
88                         /* 1MB for u-boot Bootloader Image */
89                         reg = <0x0 0x00100000>;
90                         label = "NAND U-Boot Image";
91                         read-only;
92                 };
93
94                 partition@100000 {
95                         /* 1MB for DTB Image */
96                         reg = <0x00100000 0x00100000>;
97                         label = "NAND DTB Image";
98                 };
99
100                 partition@200000 {
101                         /* 4MB for Linux Kernel Image */
102                         reg = <0x00200000 0x00400000>;
103                         label = "NAND Linux Kernel Image";
104                 };
105
106                 partition@600000 {
107                         /* 4MB for Compressed Root file System Image */
108                         reg = <0x00600000 0x00400000>;
109                         label = "NAND Compressed RFS Image";
110                 };
111
112                 partition@a00000 {
113                         /* 7MB for JFFS2 based Root file System */
114                         reg = <0x00a00000 0x00700000>;
115                         label = "NAND JFFS2 Root File System";
116                 };
117
118                 partition@1100000 {
119                         /* 15MB for User Writable Area  */
120                         reg = <0x01100000 0x00f00000>;
121                         label = "NAND Writable User area";
122                 };
123         };
124
125         L2switch@2,0 {
126                 #address-cells = <1>;
127                 #size-cells = <1>;
128                 compatible = "vitesse-7385";
129                 reg = <0x2 0x0 0x20000>;
130         };
131 };
132
133 &soc {
134         i2c@3000 {
135                 rtc@68 {
136                         compatible = "pericom,pt7c4338";
137                         reg = <0x68>;
138                 };
139         };
140
141         spi@7000 {
142                 flash@0 {
143                         #address-cells = <1>;
144                         #size-cells = <1>;
145                         compatible = "spansion,s25sl12801";
146                         reg = <0>;
147                         spi-max-frequency = <40000000>; /* input clock */
148
149                         partition@u-boot {
150                                 /* 512KB for u-boot Bootloader Image */
151                                 reg = <0x0 0x00080000>;
152                                 label = "SPI Flash U-Boot Image";
153                                 read-only;
154                         };
155
156                         partition@dtb {
157                                 /* 512KB for DTB Image */
158                                 reg = <0x00080000 0x00080000>;
159                                 label = "SPI Flash DTB Image";
160                         };
161
162                         partition@kernel {
163                                 /* 4MB for Linux Kernel Image */
164                                 reg = <0x00100000 0x00400000>;
165                                 label = "SPI Flash Linux Kernel Image";
166                         };
167
168                         partition@fs {
169                                 /* 4MB for Compressed RFS Image */
170                                 reg = <0x00500000 0x00400000>;
171                                 label = "SPI Flash Compressed RFSImage";
172                         };
173
174                         partition@jffs-fs {
175                                 /* 7MB for JFFS2 based RFS */
176                                 reg = <0x00900000 0x00700000>;
177                                 label = "SPI Flash JFFS2 RFS";
178                         };
179                 };
180         };
181
182         usb@22000 {
183                 phy_type = "ulpi";
184         };
185
186         mdio@24000 {
187                 phy0: ethernet-phy@0 {
188                         interrupt-parent = <&mpic>;
189                         interrupts = <3 1 0 0>;
190                         reg = <0x0>;
191                 };
192
193                 phy1: ethernet-phy@1 {
194                         interrupt-parent = <&mpic>;
195                         interrupts = <2 1 0 0>;
196                         reg = <0x1>;
197                 };
198
199                 tbi0: tbi-phy@11 {
200                         reg = <0x11>;
201                         device_type = "tbi-phy";
202                 };
203         };
204
205         mdio@25000 {
206                 tbi1: tbi-phy@11 {
207                         reg = <0x11>;
208                         device_type = "tbi-phy";
209                 };
210         };
211
212         mdio@26000 {
213                 tbi2: tbi-phy@11 {
214                         reg = <0x11>;
215                         device_type = "tbi-phy";
216                 };
217         };
218
219         enet0: ethernet@b0000 {
220                 fixed-link = <1 1 1000 0 0>;
221                 phy-connection-type = "rgmii-id";
222
223         };
224
225         enet1: ethernet@b1000 {
226                 phy-handle = <&phy0>;
227                 tbi-handle = <&tbi1>;
228                 phy-connection-type = "sgmii";
229         };
230
231         enet2: ethernet@b2000 {
232                 phy-handle = <&phy1>;
233                 tbi-handle = <&tbi2>;
234                 phy-connection-type = "rgmii-id";
235         };
236 };