arm: mach-shmobile: Add LCDC tx_dev field to platform data
[linux-3.10.git] / arch / arm / mach-shmobile / board-mackerel.c
1 /*
2  * mackerel board support
3  *
4  * Copyright (C) 2010 Renesas Solutions Corp.
5  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
6  *
7  * based on ap4evb
8  * Copyright (C) 2010  Magnus Damm
9  * Copyright (C) 2008  Yoshihiro Shimoda
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License as published by
13  * the Free Software Foundation; version 2 of the License.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
23  */
24 #include <linux/delay.h>
25 #include <linux/kernel.h>
26 #include <linux/init.h>
27 #include <linux/interrupt.h>
28 #include <linux/irq.h>
29 #include <linux/platform_device.h>
30 #include <linux/gpio.h>
31 #include <linux/input.h>
32 #include <linux/io.h>
33 #include <linux/i2c.h>
34 #include <linux/leds.h>
35 #include <linux/mfd/tmio.h>
36 #include <linux/mmc/host.h>
37 #include <linux/mmc/sh_mmcif.h>
38 #include <linux/mmc/sh_mobile_sdhi.h>
39 #include <linux/mtd/mtd.h>
40 #include <linux/mtd/partitions.h>
41 #include <linux/mtd/physmap.h>
42 #include <linux/pm_clock.h>
43 #include <linux/smsc911x.h>
44 #include <linux/sh_intc.h>
45 #include <linux/tca6416_keypad.h>
46 #include <linux/usb/renesas_usbhs.h>
47 #include <linux/dma-mapping.h>
48
49 #include <video/sh_mobile_hdmi.h>
50 #include <video/sh_mobile_lcdc.h>
51 #include <media/sh_mobile_ceu.h>
52 #include <media/soc_camera.h>
53 #include <media/soc_camera_platform.h>
54 #include <sound/sh_fsi.h>
55
56 #include <mach/common.h>
57 #include <mach/sh7372.h>
58
59 #include <asm/mach/arch.h>
60 #include <asm/mach/time.h>
61 #include <asm/mach/map.h>
62 #include <asm/mach-types.h>
63
64 /*
65  * Address      Interface               BusWidth        note
66  * ------------------------------------------------------------------
67  * 0x0000_0000  NOR Flash ROM (MCP)     16bit           SW7 : bit1 = ON
68  * 0x0800_0000  user area               -
69  * 0x1000_0000  NOR Flash ROM (MCP)     16bit           SW7 : bit1 = OFF
70  * 0x1400_0000  Ether (LAN9220)         16bit
71  * 0x1600_0000  user area               -               cannot use with NAND
72  * 0x1800_0000  user area               -
73  * 0x1A00_0000  -
74  * 0x4000_0000  LPDDR2-SDRAM (POP)      32bit
75  */
76
77 /*
78  * CPU mode
79  *
80  * SW4                                     | Boot Area| Master   | Remarks
81  *  1  | 2   | 3   | 4   | 5   | 6   | 8   |          | Processor|
82  * ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
83  * ON  | ON  | OFF | ON  | ON  | OFF | OFF | External | System   | External ROM
84  * ON  | ON  | ON  | ON  | ON  | OFF | OFF | External | System   | ROM Debug
85  * ON  | ON  | X   | ON  | OFF | OFF | OFF | Built-in | System   | ROM Debug
86  * X   | OFF | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
87  * OFF | X   | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
88  * X   | X   | X   | OFF | X   | X   | OFF | Built-in | System   | MaskROM
89  * OFF | ON  | OFF | X   | X   | OFF | ON  | External | System   | Standalone
90  * ON  | OFF | OFF | X   | X   | OFF | ON  | External | Realtime | Standalone
91 */
92
93 /*
94  * NOR Flash ROM
95  *
96  *  SW1  |     SW2    | SW7  | NOR Flash ROM
97  *  bit1 | bit1  bit2 | bit1 | Memory allocation
98  * ------+------------+------+------------------
99  *  OFF  | ON     OFF | ON   |    Area 0
100  *  OFF  | ON     OFF | OFF  |    Area 4
101  */
102
103 /*
104  * SMSC 9220
105  *
106  *  SW1         SMSC 9220
107  * -----------------------
108  *  ON          access disable
109  *  OFF         access enable
110  */
111
112 /*
113  * NAND Flash ROM
114  *
115  *  SW1  |     SW2    | SW7  | NAND Flash ROM
116  *  bit1 | bit1  bit2 | bit2 | Memory allocation
117  * ------+------------+------+------------------
118  *  OFF  | ON     OFF | ON   |    FCE 0
119  *  OFF  | ON     OFF | OFF  |    FCE 1
120  */
121
122 /*
123  * External interrupt pin settings
124  *
125  * IRQX  | pin setting        | device             | level
126  * ------+--------------------+--------------------+-------
127  * IRQ0  | ICR1A.IRQ0SA=0010  | SDHI2 card detect  | Low
128  * IRQ6  | ICR1A.IRQ6SA=0011  | Ether(LAN9220)     | High
129  * IRQ7  | ICR1A.IRQ7SA=0010  | LCD Touch Panel    | Low
130  * IRQ8  | ICR2A.IRQ8SA=0010  | MMC/SD card detect | Low
131  * IRQ9  | ICR2A.IRQ9SA=0010  | KEY(TCA6408)       | Low
132  * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345)    | High
133  * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975)     | High
134  */
135
136 /*
137  * USB
138  *
139  * USB0 : CN22 : Function
140  * USB1 : CN31 : Function/Host *1
141  *
142  * J30 (for CN31) *1
143  * ----------+---------------+-------------
144  * 1-2 short | VBUS 5V       | Host
145  * open      | external VBUS | Function
146  *
147  * CAUTION
148  *
149  * renesas_usbhs driver can use external interrupt mode
150  * (which come from USB-PHY) or autonomy mode (it use own interrupt)
151  * for detecting connection/disconnection when Function.
152  * USB will be power OFF while it has been disconnecting
153  * if external interrupt mode, and it is always power ON if autonomy mode,
154  *
155  * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
156  * because Touchscreen is using IRQ7-PORT40.
157  * It is impossible to use IRQ7 demux on this board.
158  */
159
160 /*
161  * SDHI0 (CN12)
162  *
163  * SW56 : OFF
164  *
165  */
166
167 /* MMC /SDHI1 (CN7)
168  *
169  * I/O voltage : 1.8v
170  *
171  * Power voltage : 1.8v or 3.3v
172  *  J22 : select power voltage *1
173  *      1-2 pin : 1.8v
174  *      2-3 pin : 3.3v
175  *
176  * *1
177  * Please change J22 depends the card to be used.
178  * MMC's OCR field set to support either voltage for the card inserted.
179  *
180  *      SW1     |       SW33
181  *              | bit1 | bit2 | bit3 | bit4
182  * -------------+------+------+------+-------
183  * MMC0   OFF   |  OFF |   X  |  ON  |  X       (Use MMCIF)
184  * SDHI1  OFF   |  ON  |   X  |  OFF |  X       (Use MFD_SH_MOBILE_SDHI)
185  *
186  */
187
188 /*
189  * SDHI2 (CN23)
190  *
191  * microSD card sloct
192  *
193  */
194
195 /*
196  * FSI - AK4642
197  *
198  * it needs amixer settings for playing
199  *
200  * amixer set "Headphone" on
201  * amixer set "HPOUTL Mixer DACH" on
202  * amixer set "HPOUTR Mixer DACH" on
203  */
204
205 /*
206  * FIXME !!
207  *
208  * gpio_no_direction
209  * gpio_pull_down
210  * are quick_hack.
211  *
212  * current gpio frame work doesn't have
213  * the method to control only pull up/down/free.
214  * this function should be replaced by correct gpio function
215  */
216 static void __init gpio_no_direction(u32 addr)
217 {
218         __raw_writeb(0x00, addr);
219 }
220
221 static void __init gpio_pull_down(u32 addr)
222 {
223         u8 data = __raw_readb(addr);
224
225         data &= 0x0F;
226         data |= 0xA0;
227
228         __raw_writeb(data, addr);
229 }
230
231 /* MTD */
232 static struct mtd_partition nor_flash_partitions[] = {
233         {
234                 .name           = "loader",
235                 .offset         = 0x00000000,
236                 .size           = 512 * 1024,
237                 .mask_flags     = MTD_WRITEABLE,
238         },
239         {
240                 .name           = "bootenv",
241                 .offset         = MTDPART_OFS_APPEND,
242                 .size           = 512 * 1024,
243                 .mask_flags     = MTD_WRITEABLE,
244         },
245         {
246                 .name           = "kernel_ro",
247                 .offset         = MTDPART_OFS_APPEND,
248                 .size           = 8 * 1024 * 1024,
249                 .mask_flags     = MTD_WRITEABLE,
250         },
251         {
252                 .name           = "kernel",
253                 .offset         = MTDPART_OFS_APPEND,
254                 .size           = 8 * 1024 * 1024,
255         },
256         {
257                 .name           = "data",
258                 .offset         = MTDPART_OFS_APPEND,
259                 .size           = MTDPART_SIZ_FULL,
260         },
261 };
262
263 static struct physmap_flash_data nor_flash_data = {
264         .width          = 2,
265         .parts          = nor_flash_partitions,
266         .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
267 };
268
269 static struct resource nor_flash_resources[] = {
270         [0]     = {
271                 .start  = 0x20000000, /* CS0 shadow instead of regular CS0 */
272                 .end    = 0x28000000 - 1, /* needed by USB MASK ROM boot */
273                 .flags  = IORESOURCE_MEM,
274         }
275 };
276
277 static struct platform_device nor_flash_device = {
278         .name           = "physmap-flash",
279         .dev            = {
280                 .platform_data  = &nor_flash_data,
281         },
282         .num_resources  = ARRAY_SIZE(nor_flash_resources),
283         .resource       = nor_flash_resources,
284 };
285
286 /* SMSC */
287 static struct resource smc911x_resources[] = {
288         {
289                 .start  = 0x14000000,
290                 .end    = 0x16000000 - 1,
291                 .flags  = IORESOURCE_MEM,
292         }, {
293                 .start  = evt2irq(0x02c0) /* IRQ6A */,
294                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
295         },
296 };
297
298 static struct smsc911x_platform_config smsc911x_info = {
299         .flags          = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
300         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
301         .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
302 };
303
304 static struct platform_device smc911x_device = {
305         .name           = "smsc911x",
306         .id             = -1,
307         .num_resources  = ARRAY_SIZE(smc911x_resources),
308         .resource       = smc911x_resources,
309         .dev            = {
310                 .platform_data = &smsc911x_info,
311         },
312 };
313
314 /* MERAM */
315 static struct sh_mobile_meram_info mackerel_meram_info = {
316         .addr_mode      = SH_MOBILE_MERAM_MODE1,
317 };
318
319 static struct resource meram_resources[] = {
320         [0] = {
321                 .name   = "MERAM",
322                 .start  = 0xe8000000,
323                 .end    = 0xe81fffff,
324                 .flags  = IORESOURCE_MEM,
325         },
326 };
327
328 static struct platform_device meram_device = {
329         .name           = "sh_mobile_meram",
330         .id             = 0,
331         .num_resources  = ARRAY_SIZE(meram_resources),
332         .resource       = meram_resources,
333         .dev            = {
334                 .platform_data = &mackerel_meram_info,
335         },
336 };
337
338 /* LCDC */
339 static struct fb_videomode mackerel_lcdc_modes[] = {
340         {
341                 .name           = "WVGA Panel",
342                 .xres           = 800,
343                 .yres           = 480,
344                 .left_margin    = 220,
345                 .right_margin   = 110,
346                 .hsync_len      = 70,
347                 .upper_margin   = 20,
348                 .lower_margin   = 5,
349                 .vsync_len      = 5,
350                 .sync           = 0,
351         },
352 };
353
354 static int mackerel_set_brightness(void *board_data, int brightness)
355 {
356         gpio_set_value(GPIO_PORT31, brightness);
357
358         return 0;
359 }
360
361 static int mackerel_get_brightness(void *board_data)
362 {
363         return gpio_get_value(GPIO_PORT31);
364 }
365
366 static struct sh_mobile_meram_cfg lcd_meram_cfg = {
367         .icb[0] = {
368                 .marker_icb     = 28,
369                 .cache_icb      = 24,
370                 .meram_offset   = 0x0,
371                 .meram_size     = 0x40,
372         },
373         .icb[1] = {
374                 .marker_icb     = 29,
375                 .cache_icb      = 25,
376                 .meram_offset   = 0x40,
377                 .meram_size     = 0x40,
378         },
379 };
380
381 static struct sh_mobile_lcdc_info lcdc_info = {
382         .meram_dev = &mackerel_meram_info,
383         .clock_source = LCDC_CLK_BUS,
384         .ch[0] = {
385                 .chan = LCDC_CHAN_MAINLCD,
386                 .fourcc = V4L2_PIX_FMT_RGB565,
387                 .lcd_cfg = mackerel_lcdc_modes,
388                 .num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
389                 .interface_type         = RGB24,
390                 .clock_divider          = 3,
391                 .flags                  = 0,
392                 .lcd_size_cfg.width     = 152,
393                 .lcd_size_cfg.height    = 91,
394                 .board_cfg = {
395                         .set_brightness = mackerel_set_brightness,
396                         .get_brightness = mackerel_get_brightness,
397                 },
398                 .bl_info = {
399                         .name = "sh_mobile_lcdc_bl",
400                         .max_brightness = 1,
401                 },
402                 .meram_cfg = &lcd_meram_cfg,
403         }
404 };
405
406 static struct resource lcdc_resources[] = {
407         [0] = {
408                 .name   = "LCDC",
409                 .start  = 0xfe940000,
410                 .end    = 0xfe943fff,
411                 .flags  = IORESOURCE_MEM,
412         },
413         [1] = {
414                 .start  = intcs_evt2irq(0x580),
415                 .flags  = IORESOURCE_IRQ,
416         },
417 };
418
419 static struct platform_device lcdc_device = {
420         .name           = "sh_mobile_lcdc_fb",
421         .num_resources  = ARRAY_SIZE(lcdc_resources),
422         .resource       = lcdc_resources,
423         .dev    = {
424                 .platform_data  = &lcdc_info,
425                 .coherent_dma_mask = ~0,
426         },
427 };
428
429 /* HDMI */
430 static struct sh_mobile_lcdc_info hdmi_lcdc_info;
431
432 static struct sh_mobile_hdmi_info hdmi_info = {
433         .lcd_chan       = &hdmi_lcdc_info.ch[0],
434         .flags          = HDMI_SND_SRC_SPDIF,
435 };
436
437 static struct resource hdmi_resources[] = {
438         [0] = {
439                 .name   = "HDMI",
440                 .start  = 0xe6be0000,
441                 .end    = 0xe6be00ff,
442                 .flags  = IORESOURCE_MEM,
443         },
444         [1] = {
445                 /* There's also an HDMI interrupt on INTCS @ 0x18e0 */
446                 .start  = evt2irq(0x17e0),
447                 .flags  = IORESOURCE_IRQ,
448         },
449 };
450
451 static struct platform_device hdmi_device = {
452         .name           = "sh-mobile-hdmi",
453         .num_resources  = ARRAY_SIZE(hdmi_resources),
454         .resource       = hdmi_resources,
455         .id             = -1,
456         .dev    = {
457                 .platform_data  = &hdmi_info,
458         },
459 };
460
461 static struct sh_mobile_meram_cfg hdmi_meram_cfg = {
462         .icb[0] = {
463                 .marker_icb     = 30,
464                 .cache_icb      = 26,
465                 .meram_offset   = 0x80,
466                 .meram_size     = 0x100,
467         },
468         .icb[1] = {
469                 .marker_icb     = 31,
470                 .cache_icb      = 27,
471                 .meram_offset   = 0x180,
472                 .meram_size     = 0x100,
473         },
474 };
475
476 static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
477         .meram_dev = &mackerel_meram_info,
478         .clock_source = LCDC_CLK_EXTERNAL,
479         .ch[0] = {
480                 .chan = LCDC_CHAN_MAINLCD,
481                 .fourcc = V4L2_PIX_FMT_RGB565,
482                 .interface_type = RGB24,
483                 .clock_divider = 1,
484                 .flags = LCDC_FLAGS_DWPOL,
485                 .meram_cfg = &hdmi_meram_cfg,
486                 .tx_dev = &hdmi_device,
487         }
488 };
489
490 static struct resource hdmi_lcdc_resources[] = {
491         [0] = {
492                 .name   = "LCDC1",
493                 .start  = 0xfe944000,
494                 .end    = 0xfe947fff,
495                 .flags  = IORESOURCE_MEM,
496         },
497         [1] = {
498                 .start  = intcs_evt2irq(0x1780),
499                 .flags  = IORESOURCE_IRQ,
500         },
501 };
502
503 static struct platform_device hdmi_lcdc_device = {
504         .name           = "sh_mobile_lcdc_fb",
505         .num_resources  = ARRAY_SIZE(hdmi_lcdc_resources),
506         .resource       = hdmi_lcdc_resources,
507         .id             = 1,
508         .dev    = {
509                 .platform_data  = &hdmi_lcdc_info,
510                 .coherent_dma_mask = ~0,
511         },
512 };
513
514 static struct platform_device fsi_hdmi_device = {
515         .name           = "sh_fsi2_b_hdmi",
516 };
517
518 static void __init hdmi_init_pm_clock(void)
519 {
520         struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
521         int ret;
522         long rate;
523
524         if (IS_ERR(hdmi_ick)) {
525                 ret = PTR_ERR(hdmi_ick);
526                 pr_err("Cannot get HDMI ICK: %d\n", ret);
527                 goto out;
528         }
529
530         ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
531         if (ret < 0) {
532                 pr_err("Cannot set PLLC2 parent: %d, %d users\n",
533                        ret, sh7372_pllc2_clk.usecount);
534                 goto out;
535         }
536
537         pr_debug("PLLC2 initial frequency %lu\n",
538                  clk_get_rate(&sh7372_pllc2_clk));
539
540         rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
541         if (rate < 0) {
542                 pr_err("Cannot get suitable rate: %ld\n", rate);
543                 ret = rate;
544                 goto out;
545         }
546
547         ret = clk_set_rate(&sh7372_pllc2_clk, rate);
548         if (ret < 0) {
549                 pr_err("Cannot set rate %ld: %d\n", rate, ret);
550                 goto out;
551         }
552
553         pr_debug("PLLC2 set frequency %lu\n", rate);
554
555         ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
556         if (ret < 0)
557                 pr_err("Cannot set HDMI parent: %d\n", ret);
558
559 out:
560         if (!IS_ERR(hdmi_ick))
561                 clk_put(hdmi_ick);
562 }
563
564 /* USBHS0 is connected to CN22 which takes a USB Mini-B plug
565  *
566  * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
567  * but on this particular board IRQ7 is already used by
568  * the touch screen. This leaves us with software polling.
569  */
570 #define USBHS0_POLL_INTERVAL (HZ * 5)
571
572 struct usbhs_private {
573         unsigned int usbphyaddr;
574         unsigned int usbcrcaddr;
575         struct renesas_usbhs_platform_info info;
576         struct delayed_work work;
577         struct platform_device *pdev;
578 };
579
580 #define usbhs_get_priv(pdev)                            \
581         container_of(renesas_usbhs_get_info(pdev),      \
582                      struct usbhs_private, info)
583
584 #define usbhs_is_connected(priv)                        \
585         (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
586
587 static int usbhs_get_vbus(struct platform_device *pdev)
588 {
589         return usbhs_is_connected(usbhs_get_priv(pdev));
590 }
591
592 static void usbhs_phy_reset(struct platform_device *pdev)
593 {
594         struct usbhs_private *priv = usbhs_get_priv(pdev);
595
596         /* init phy */
597         __raw_writew(0x8a0a, priv->usbcrcaddr);
598 }
599
600 static int usbhs0_get_id(struct platform_device *pdev)
601 {
602         return USBHS_GADGET;
603 }
604
605 static void usbhs0_work_function(struct work_struct *work)
606 {
607         struct usbhs_private *priv = container_of(work, struct usbhs_private,
608                                                   work.work);
609
610         renesas_usbhs_call_notify_hotplug(priv->pdev);
611         schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
612 }
613
614 static int usbhs0_hardware_init(struct platform_device *pdev)
615 {
616         struct usbhs_private *priv = usbhs_get_priv(pdev);
617
618         priv->pdev = pdev;
619         INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
620         schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
621         return 0;
622 }
623
624 static void usbhs0_hardware_exit(struct platform_device *pdev)
625 {
626         struct usbhs_private *priv = usbhs_get_priv(pdev);
627
628         cancel_delayed_work_sync(&priv->work);
629 }
630
631 static struct usbhs_private usbhs0_private = {
632         .usbcrcaddr     = 0xe605810c,           /* USBCR2 */
633         .info = {
634                 .platform_callback = {
635                         .hardware_init  = usbhs0_hardware_init,
636                         .hardware_exit  = usbhs0_hardware_exit,
637                         .phy_reset      = usbhs_phy_reset,
638                         .get_id         = usbhs0_get_id,
639                         .get_vbus       = usbhs_get_vbus,
640                 },
641                 .driver_param = {
642                         .buswait_bwait  = 4,
643                         .d0_tx_id       = SHDMA_SLAVE_USB0_TX,
644                         .d1_rx_id       = SHDMA_SLAVE_USB0_RX,
645                 },
646         },
647 };
648
649 static struct resource usbhs0_resources[] = {
650         [0] = {
651                 .name   = "USBHS0",
652                 .start  = 0xe6890000,
653                 .end    = 0xe68900e6 - 1,
654                 .flags  = IORESOURCE_MEM,
655         },
656         [1] = {
657                 .start  = evt2irq(0x1ca0) /* USB0_USB0I0 */,
658                 .flags  = IORESOURCE_IRQ,
659         },
660 };
661
662 static struct platform_device usbhs0_device = {
663         .name   = "renesas_usbhs",
664         .id     = 0,
665         .dev = {
666                 .platform_data          = &usbhs0_private.info,
667         },
668         .num_resources  = ARRAY_SIZE(usbhs0_resources),
669         .resource       = usbhs0_resources,
670 };
671
672 /* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
673  *
674  * Use J30 to select between Host and Function. This setting
675  * can however not be detected by software. Hotplug of USBHS1
676  * is provided via IRQ8.
677  *
678  * Current USB1 works as "USB Host".
679  *  - set J30 "short"
680  *
681  * If you want to use it as "USB gadget",
682  *  - J30 "open"
683  *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
684  *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
685  */
686 #define IRQ8 evt2irq(0x0300)
687 #define USB_PHY_MODE            (1 << 4)
688 #define USB_PHY_INT_EN          ((1 << 3) | (1 << 2))
689 #define USB_PHY_ON              (1 << 1)
690 #define USB_PHY_OFF             (1 << 0)
691 #define USB_PHY_INT_CLR         (USB_PHY_ON | USB_PHY_OFF)
692
693 static irqreturn_t usbhs1_interrupt(int irq, void *data)
694 {
695         struct platform_device *pdev = data;
696         struct usbhs_private *priv = usbhs_get_priv(pdev);
697
698         dev_dbg(&pdev->dev, "%s\n", __func__);
699
700         renesas_usbhs_call_notify_hotplug(pdev);
701
702         /* clear status */
703         __raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
704                      priv->usbphyaddr);
705
706         return IRQ_HANDLED;
707 }
708
709 static int usbhs1_hardware_init(struct platform_device *pdev)
710 {
711         struct usbhs_private *priv = usbhs_get_priv(pdev);
712         int ret;
713
714         /* clear interrupt status */
715         __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
716
717         ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
718                           dev_name(&pdev->dev), pdev);
719         if (ret) {
720                 dev_err(&pdev->dev, "request_irq err\n");
721                 return ret;
722         }
723
724         /* enable USB phy interrupt */
725         __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
726
727         return 0;
728 }
729
730 static void usbhs1_hardware_exit(struct platform_device *pdev)
731 {
732         struct usbhs_private *priv = usbhs_get_priv(pdev);
733
734         /* clear interrupt status */
735         __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
736
737         free_irq(IRQ8, pdev);
738 }
739
740 static int usbhs1_get_id(struct platform_device *pdev)
741 {
742         return USBHS_HOST;
743 }
744
745 static u32 usbhs1_pipe_cfg[] = {
746         USB_ENDPOINT_XFER_CONTROL,
747         USB_ENDPOINT_XFER_ISOC,
748         USB_ENDPOINT_XFER_ISOC,
749         USB_ENDPOINT_XFER_BULK,
750         USB_ENDPOINT_XFER_BULK,
751         USB_ENDPOINT_XFER_BULK,
752         USB_ENDPOINT_XFER_INT,
753         USB_ENDPOINT_XFER_INT,
754         USB_ENDPOINT_XFER_INT,
755         USB_ENDPOINT_XFER_BULK,
756         USB_ENDPOINT_XFER_BULK,
757         USB_ENDPOINT_XFER_BULK,
758         USB_ENDPOINT_XFER_BULK,
759         USB_ENDPOINT_XFER_BULK,
760         USB_ENDPOINT_XFER_BULK,
761         USB_ENDPOINT_XFER_BULK,
762 };
763
764 static struct usbhs_private usbhs1_private = {
765         .usbphyaddr     = 0xe60581e2,           /* USBPHY1INTAP */
766         .usbcrcaddr     = 0xe6058130,           /* USBCR4 */
767         .info = {
768                 .platform_callback = {
769                         .hardware_init  = usbhs1_hardware_init,
770                         .hardware_exit  = usbhs1_hardware_exit,
771                         .get_id         = usbhs1_get_id,
772                         .phy_reset      = usbhs_phy_reset,
773                 },
774                 .driver_param = {
775                         .buswait_bwait  = 4,
776                         .has_otg        = 1,
777                         .pipe_type      = usbhs1_pipe_cfg,
778                         .pipe_size      = ARRAY_SIZE(usbhs1_pipe_cfg),
779                         .d0_tx_id       = SHDMA_SLAVE_USB1_TX,
780                         .d1_rx_id       = SHDMA_SLAVE_USB1_RX,
781                 },
782         },
783 };
784
785 static struct resource usbhs1_resources[] = {
786         [0] = {
787                 .name   = "USBHS1",
788                 .start  = 0xe68b0000,
789                 .end    = 0xe68b00e6 - 1,
790                 .flags  = IORESOURCE_MEM,
791         },
792         [1] = {
793                 .start  = evt2irq(0x1ce0) /* USB1_USB1I0 */,
794                 .flags  = IORESOURCE_IRQ,
795         },
796 };
797
798 static struct platform_device usbhs1_device = {
799         .name   = "renesas_usbhs",
800         .id     = 1,
801         .dev = {
802                 .platform_data          = &usbhs1_private.info,
803         },
804         .num_resources  = ARRAY_SIZE(usbhs1_resources),
805         .resource       = usbhs1_resources,
806 };
807
808 /* LED */
809 static struct gpio_led mackerel_leds[] = {
810         {
811                 .name           = "led0",
812                 .gpio           = GPIO_PORT0,
813                 .default_state  = LEDS_GPIO_DEFSTATE_ON,
814         },
815         {
816                 .name           = "led1",
817                 .gpio           = GPIO_PORT1,
818                 .default_state  = LEDS_GPIO_DEFSTATE_ON,
819         },
820         {
821                 .name           = "led2",
822                 .gpio           = GPIO_PORT2,
823                 .default_state  = LEDS_GPIO_DEFSTATE_ON,
824         },
825         {
826                 .name           = "led3",
827                 .gpio           = GPIO_PORT159,
828                 .default_state  = LEDS_GPIO_DEFSTATE_ON,
829         }
830 };
831
832 static struct gpio_led_platform_data mackerel_leds_pdata = {
833         .leds = mackerel_leds,
834         .num_leds = ARRAY_SIZE(mackerel_leds),
835 };
836
837 static struct platform_device leds_device = {
838         .name = "leds-gpio",
839         .id = 0,
840         .dev = {
841                 .platform_data  = &mackerel_leds_pdata,
842         },
843 };
844
845 /* FSI */
846 #define IRQ_FSI evt2irq(0x1840)
847 static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
848 {
849         int ret;
850
851         if (rate <= 0)
852                 return 0;
853
854         if (!enable) {
855                 clk_disable(clk);
856                 return 0;
857         }
858
859         ret = clk_set_rate(clk, clk_round_rate(clk, rate));
860         if (ret < 0)
861                 return ret;
862
863         return clk_enable(clk);
864 }
865
866 static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
867 {
868         struct clk *fsib_clk;
869         struct clk *fdiv_clk = &sh7372_fsidivb_clk;
870         long fsib_rate = 0;
871         long fdiv_rate = 0;
872         int ackmd_bpfmd;
873         int ret;
874
875         /* FSIA is slave mode. nothing to do here */
876         if (is_porta)
877                 return 0;
878
879         /* clock start */
880         switch (rate) {
881         case 44100:
882                 fsib_rate       = rate * 256;
883                 ackmd_bpfmd     = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
884                 break;
885         case 48000:
886                 fsib_rate       = 85428000; /* around 48kHz x 256 x 7 */
887                 fdiv_rate       = rate * 256;
888                 ackmd_bpfmd     = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
889                 break;
890         default:
891                 pr_err("unsupported rate in FSI2 port B\n");
892                 return -EINVAL;
893         }
894
895         /* FSI B setting */
896         fsib_clk = clk_get(dev, "ickb");
897         if (IS_ERR(fsib_clk))
898                 return -EIO;
899
900         /* fsib */
901         ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
902         if (ret < 0)
903                 goto fsi_set_rate_end;
904
905         /* FSI DIV */
906         ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
907         if (ret < 0) {
908                 /* disable FSI B */
909                 if (enable)
910                         __fsi_set_round_rate(fsib_clk, fsib_rate, 0);
911                 goto fsi_set_rate_end;
912         }
913
914         ret = ackmd_bpfmd;
915
916 fsi_set_rate_end:
917         clk_put(fsib_clk);
918         return ret;
919 }
920
921 static struct sh_fsi_platform_info fsi_info = {
922         .porta_flags =  SH_FSI_BRS_INV,
923
924         .portb_flags =  SH_FSI_BRS_INV  |
925                         SH_FSI_BRM_INV  |
926                         SH_FSI_LRS_INV  |
927                         SH_FSI_FMT_SPDIF,
928
929         .set_rate = fsi_set_rate,
930 };
931
932 static struct resource fsi_resources[] = {
933         [0] = {
934                 .name   = "FSI",
935                 .start  = 0xFE3C0000,
936                 .end    = 0xFE3C0400 - 1,
937                 .flags  = IORESOURCE_MEM,
938         },
939         [1] = {
940                 .start  = IRQ_FSI,
941                 .flags  = IORESOURCE_IRQ,
942         },
943 };
944
945 static struct platform_device fsi_device = {
946         .name           = "sh_fsi2",
947         .id             = -1,
948         .num_resources  = ARRAY_SIZE(fsi_resources),
949         .resource       = fsi_resources,
950         .dev    = {
951                 .platform_data  = &fsi_info,
952         },
953 };
954
955 static struct fsi_ak4642_info fsi2_ak4643_info = {
956         .name           = "AK4643",
957         .card           = "FSI2A-AK4643",
958         .cpu_dai        = "fsia-dai",
959         .codec          = "ak4642-codec.0-0013",
960         .platform       = "sh_fsi2",
961         .id             = FSI_PORT_A,
962 };
963
964 static struct platform_device fsi_ak4643_device = {
965         .name   = "fsi-ak4642-audio",
966         .dev    = {
967                 .platform_data  = &fsi2_ak4643_info,
968         },
969 };
970
971 /*
972  * The card detect pin of the top SD/MMC slot (CN7) is active low and is
973  * connected to GPIO A22 of SH7372 (GPIO_PORT41).
974  */
975 static int slot_cn7_get_cd(struct platform_device *pdev)
976 {
977         return !gpio_get_value(GPIO_PORT41);
978 }
979
980 /* SDHI0 */
981 static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
982 {
983         struct device *dev = arg;
984         struct sh_mobile_sdhi_info *info = dev->platform_data;
985         struct tmio_mmc_data *pdata = info->pdata;
986
987         tmio_mmc_cd_wakeup(pdata);
988
989         return IRQ_HANDLED;
990 }
991
992 static struct sh_mobile_sdhi_info sdhi0_info = {
993         .dma_slave_tx   = SHDMA_SLAVE_SDHI0_TX,
994         .dma_slave_rx   = SHDMA_SLAVE_SDHI0_RX,
995         .tmio_caps      = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
996 };
997
998 static struct resource sdhi0_resources[] = {
999         [0] = {
1000                 .name   = "SDHI0",
1001                 .start  = 0xe6850000,
1002                 .end    = 0xe68500ff,
1003                 .flags  = IORESOURCE_MEM,
1004         },
1005         [1] = {
1006                 .start  = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
1007                 .flags  = IORESOURCE_IRQ,
1008         },
1009         [2] = {
1010                 .start  = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
1011                 .flags  = IORESOURCE_IRQ,
1012         },
1013         [3] = {
1014                 .start  = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
1015                 .flags  = IORESOURCE_IRQ,
1016         },
1017 };
1018
1019 static struct platform_device sdhi0_device = {
1020         .name           = "sh_mobile_sdhi",
1021         .num_resources  = ARRAY_SIZE(sdhi0_resources),
1022         .resource       = sdhi0_resources,
1023         .id             = 0,
1024         .dev    = {
1025                 .platform_data  = &sdhi0_info,
1026         },
1027 };
1028
1029 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
1030 /* SDHI1 */
1031 static struct sh_mobile_sdhi_info sdhi1_info = {
1032         .dma_slave_tx   = SHDMA_SLAVE_SDHI1_TX,
1033         .dma_slave_rx   = SHDMA_SLAVE_SDHI1_RX,
1034         .tmio_ocr_mask  = MMC_VDD_165_195,
1035         .tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE,
1036         .tmio_caps      = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
1037                           MMC_CAP_NEEDS_POLL,
1038         .get_cd         = slot_cn7_get_cd,
1039 };
1040
1041 static struct resource sdhi1_resources[] = {
1042         [0] = {
1043                 .name   = "SDHI1",
1044                 .start  = 0xe6860000,
1045                 .end    = 0xe68600ff,
1046                 .flags  = IORESOURCE_MEM,
1047         },
1048         [1] = {
1049                 .name   = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
1050                 .start  = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
1051                 .flags  = IORESOURCE_IRQ,
1052         },
1053         [2] = {
1054                 .name   = SH_MOBILE_SDHI_IRQ_SDCARD,
1055                 .start  = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
1056                 .flags  = IORESOURCE_IRQ,
1057         },
1058         [3] = {
1059                 .name   = SH_MOBILE_SDHI_IRQ_SDIO,
1060                 .start  = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
1061                 .flags  = IORESOURCE_IRQ,
1062         },
1063 };
1064
1065 static struct platform_device sdhi1_device = {
1066         .name           = "sh_mobile_sdhi",
1067         .num_resources  = ARRAY_SIZE(sdhi1_resources),
1068         .resource       = sdhi1_resources,
1069         .id             = 1,
1070         .dev    = {
1071                 .platform_data  = &sdhi1_info,
1072         },
1073 };
1074 #endif
1075
1076 /*
1077  * The card detect pin of the top SD/MMC slot (CN23) is active low and is
1078  * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162).
1079  */
1080 static int slot_cn23_get_cd(struct platform_device *pdev)
1081 {
1082         return !gpio_get_value(GPIO_PORT162);
1083 }
1084
1085 /* SDHI2 */
1086 static struct sh_mobile_sdhi_info sdhi2_info = {
1087         .dma_slave_tx   = SHDMA_SLAVE_SDHI2_TX,
1088         .dma_slave_rx   = SHDMA_SLAVE_SDHI2_RX,
1089         .tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE,
1090         .tmio_caps      = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
1091                           MMC_CAP_NEEDS_POLL,
1092         .get_cd         = slot_cn23_get_cd,
1093 };
1094
1095 static struct resource sdhi2_resources[] = {
1096         [0] = {
1097                 .name   = "SDHI2",
1098                 .start  = 0xe6870000,
1099                 .end    = 0xe68700ff,
1100                 .flags  = IORESOURCE_MEM,
1101         },
1102         [1] = {
1103                 .name   = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
1104                 .start  = evt2irq(0x1200), /* SDHI2_SDHI2I0 */
1105                 .flags  = IORESOURCE_IRQ,
1106         },
1107         [2] = {
1108                 .name   = SH_MOBILE_SDHI_IRQ_SDCARD,
1109                 .start  = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
1110                 .flags  = IORESOURCE_IRQ,
1111         },
1112         [3] = {
1113                 .name   = SH_MOBILE_SDHI_IRQ_SDIO,
1114                 .start  = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
1115                 .flags  = IORESOURCE_IRQ,
1116         },
1117 };
1118
1119 static struct platform_device sdhi2_device = {
1120         .name   = "sh_mobile_sdhi",
1121         .num_resources  = ARRAY_SIZE(sdhi2_resources),
1122         .resource       = sdhi2_resources,
1123         .id             = 2,
1124         .dev    = {
1125                 .platform_data  = &sdhi2_info,
1126         },
1127 };
1128
1129 /* SH_MMCIF */
1130 static struct resource sh_mmcif_resources[] = {
1131         [0] = {
1132                 .name   = "MMCIF",
1133                 .start  = 0xE6BD0000,
1134                 .end    = 0xE6BD00FF,
1135                 .flags  = IORESOURCE_MEM,
1136         },
1137         [1] = {
1138                 /* MMC ERR */
1139                 .start  = evt2irq(0x1ac0),
1140                 .flags  = IORESOURCE_IRQ,
1141         },
1142         [2] = {
1143                 /* MMC NOR */
1144                 .start  = evt2irq(0x1ae0),
1145                 .flags  = IORESOURCE_IRQ,
1146         },
1147 };
1148
1149 static struct sh_mmcif_plat_data sh_mmcif_plat = {
1150         .sup_pclk       = 0,
1151         .ocr            = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
1152         .caps           = MMC_CAP_4_BIT_DATA |
1153                           MMC_CAP_8_BIT_DATA |
1154                           MMC_CAP_NEEDS_POLL,
1155         .get_cd         = slot_cn7_get_cd,
1156         .slave_id_tx    = SHDMA_SLAVE_MMCIF_TX,
1157         .slave_id_rx    = SHDMA_SLAVE_MMCIF_RX,
1158 };
1159
1160 static struct platform_device sh_mmcif_device = {
1161         .name           = "sh_mmcif",
1162         .id             = 0,
1163         .dev            = {
1164                 .dma_mask               = NULL,
1165                 .coherent_dma_mask      = 0xffffffff,
1166                 .platform_data          = &sh_mmcif_plat,
1167         },
1168         .num_resources  = ARRAY_SIZE(sh_mmcif_resources),
1169         .resource       = sh_mmcif_resources,
1170 };
1171
1172
1173 static int mackerel_camera_add(struct soc_camera_device *icd);
1174 static void mackerel_camera_del(struct soc_camera_device *icd);
1175
1176 static int camera_set_capture(struct soc_camera_platform_info *info,
1177                               int enable)
1178 {
1179         return 0; /* camera sensor always enabled */
1180 }
1181
1182 static struct soc_camera_platform_info camera_info = {
1183         .format_name = "UYVY",
1184         .format_depth = 16,
1185         .format = {
1186                 .code = V4L2_MBUS_FMT_UYVY8_2X8,
1187                 .colorspace = V4L2_COLORSPACE_SMPTE170M,
1188                 .field = V4L2_FIELD_NONE,
1189                 .width = 640,
1190                 .height = 480,
1191         },
1192         .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
1193         V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
1194         V4L2_MBUS_DATA_ACTIVE_HIGH,
1195         .mbus_type = V4L2_MBUS_PARALLEL,
1196         .set_capture = camera_set_capture,
1197 };
1198
1199 static struct soc_camera_link camera_link = {
1200         .bus_id         = 0,
1201         .add_device     = mackerel_camera_add,
1202         .del_device     = mackerel_camera_del,
1203         .module_name    = "soc_camera_platform",
1204         .priv           = &camera_info,
1205 };
1206
1207 static struct platform_device *camera_device;
1208
1209 static void mackerel_camera_release(struct device *dev)
1210 {
1211         soc_camera_platform_release(&camera_device);
1212 }
1213
1214 static int mackerel_camera_add(struct soc_camera_device *icd)
1215 {
1216         return soc_camera_platform_add(icd, &camera_device, &camera_link,
1217                                        mackerel_camera_release, 0);
1218 }
1219
1220 static void mackerel_camera_del(struct soc_camera_device *icd)
1221 {
1222         soc_camera_platform_del(icd, camera_device, &camera_link);
1223 }
1224
1225 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
1226         .flags = SH_CEU_FLAG_USE_8BIT_BUS,
1227 };
1228
1229 static struct resource ceu_resources[] = {
1230         [0] = {
1231                 .name   = "CEU",
1232                 .start  = 0xfe910000,
1233                 .end    = 0xfe91009f,
1234                 .flags  = IORESOURCE_MEM,
1235         },
1236         [1] = {
1237                 .start  = intcs_evt2irq(0x880),
1238                 .flags  = IORESOURCE_IRQ,
1239         },
1240         [2] = {
1241                 /* place holder for contiguous memory */
1242         },
1243 };
1244
1245 static struct platform_device ceu_device = {
1246         .name           = "sh_mobile_ceu",
1247         .id             = 0, /* "ceu0" clock */
1248         .num_resources  = ARRAY_SIZE(ceu_resources),
1249         .resource       = ceu_resources,
1250         .dev            = {
1251                 .platform_data          = &sh_mobile_ceu_info,
1252                 .coherent_dma_mask      = 0xffffffff,
1253         },
1254 };
1255
1256 static struct platform_device mackerel_camera = {
1257         .name   = "soc-camera-pdrv",
1258         .id     = 0,
1259         .dev    = {
1260                 .platform_data = &camera_link,
1261         },
1262 };
1263
1264 static struct platform_device *mackerel_devices[] __initdata = {
1265         &nor_flash_device,
1266         &smc911x_device,
1267         &lcdc_device,
1268         &usbhs1_device,
1269         &usbhs0_device,
1270         &leds_device,
1271         &fsi_device,
1272         &fsi_ak4643_device,
1273         &fsi_hdmi_device,
1274         &sdhi0_device,
1275 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
1276         &sdhi1_device,
1277 #endif
1278         &sdhi2_device,
1279         &sh_mmcif_device,
1280         &ceu_device,
1281         &mackerel_camera,
1282         &hdmi_device,
1283         &hdmi_lcdc_device,
1284         &meram_device,
1285 };
1286
1287 /* Keypad Initialization */
1288 #define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
1289 {                                                               \
1290         .type           = ev_type,                              \
1291         .code           = ev_code,                              \
1292         .active_low     = act_low,                              \
1293 }
1294
1295 #define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
1296
1297 static struct tca6416_button mackerel_gpio_keys[] = {
1298         KEYPAD_BUTTON_LOW(KEY_HOME),
1299         KEYPAD_BUTTON_LOW(KEY_MENU),
1300         KEYPAD_BUTTON_LOW(KEY_BACK),
1301         KEYPAD_BUTTON_LOW(KEY_POWER),
1302 };
1303
1304 static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
1305         .buttons        = mackerel_gpio_keys,
1306         .nbuttons       = ARRAY_SIZE(mackerel_gpio_keys),
1307         .rep            = 1,
1308         .use_polling    = 0,
1309         .pinmask        = 0x000F,
1310 };
1311
1312 /* I2C */
1313 #define IRQ7 evt2irq(0x02e0)
1314 #define IRQ9 evt2irq(0x0320)
1315
1316 static struct i2c_board_info i2c0_devices[] = {
1317         {
1318                 I2C_BOARD_INFO("ak4643", 0x13),
1319         },
1320         /* Keypad */
1321         {
1322                 I2C_BOARD_INFO("tca6408-keys", 0x20),
1323                 .platform_data = &mackerel_tca6416_keys_info,
1324                 .irq = IRQ9,
1325         },
1326         /* Touchscreen */
1327         {
1328                 I2C_BOARD_INFO("st1232-ts", 0x55),
1329                 .irq = IRQ7,
1330         },
1331 };
1332
1333 #define IRQ21 evt2irq(0x32a0)
1334
1335 static struct i2c_board_info i2c1_devices[] = {
1336         /* Accelerometer */
1337         {
1338                 I2C_BOARD_INFO("adxl34x", 0x53),
1339                 .irq = IRQ21,
1340         },
1341 };
1342
1343 static struct map_desc mackerel_io_desc[] __initdata = {
1344         /* create a 1:1 entity map for 0xe6xxxxxx
1345          * used by CPGA, INTC and PFC.
1346          */
1347         {
1348                 .virtual        = 0xe6000000,
1349                 .pfn            = __phys_to_pfn(0xe6000000),
1350                 .length         = 256 << 20,
1351                 .type           = MT_DEVICE_NONSHARED
1352         },
1353 };
1354
1355 static void __init mackerel_map_io(void)
1356 {
1357         iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
1358
1359         /* setup early devices and console here as well */
1360         sh7372_add_early_devices();
1361         shmobile_setup_console();
1362 }
1363
1364 #define GPIO_PORT9CR    0xE6051009
1365 #define GPIO_PORT10CR   0xE605100A
1366 #define GPIO_PORT167CR  0xE60520A7
1367 #define GPIO_PORT168CR  0xE60520A8
1368 #define SRCR4           0xe61580bc
1369 #define USCCR1          0xE6058144
1370 static void __init mackerel_init(void)
1371 {
1372         u32 srcr4;
1373         struct clk *clk;
1374         int ret;
1375
1376         sh7372_pinmux_init();
1377
1378         /* enable SCIFA0 */
1379         gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
1380         gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
1381
1382         /* enable SMSC911X */
1383         gpio_request(GPIO_FN_CS5A,      NULL);
1384         gpio_request(GPIO_FN_IRQ6_39,   NULL);
1385
1386         /* LCDC */
1387         gpio_request(GPIO_FN_LCDD23,   NULL);
1388         gpio_request(GPIO_FN_LCDD22,   NULL);
1389         gpio_request(GPIO_FN_LCDD21,   NULL);
1390         gpio_request(GPIO_FN_LCDD20,   NULL);
1391         gpio_request(GPIO_FN_LCDD19,   NULL);
1392         gpio_request(GPIO_FN_LCDD18,   NULL);
1393         gpio_request(GPIO_FN_LCDD17,   NULL);
1394         gpio_request(GPIO_FN_LCDD16,   NULL);
1395         gpio_request(GPIO_FN_LCDD15,   NULL);
1396         gpio_request(GPIO_FN_LCDD14,   NULL);
1397         gpio_request(GPIO_FN_LCDD13,   NULL);
1398         gpio_request(GPIO_FN_LCDD12,   NULL);
1399         gpio_request(GPIO_FN_LCDD11,   NULL);
1400         gpio_request(GPIO_FN_LCDD10,   NULL);
1401         gpio_request(GPIO_FN_LCDD9,    NULL);
1402         gpio_request(GPIO_FN_LCDD8,    NULL);
1403         gpio_request(GPIO_FN_LCDD7,    NULL);
1404         gpio_request(GPIO_FN_LCDD6,    NULL);
1405         gpio_request(GPIO_FN_LCDD5,    NULL);
1406         gpio_request(GPIO_FN_LCDD4,    NULL);
1407         gpio_request(GPIO_FN_LCDD3,    NULL);
1408         gpio_request(GPIO_FN_LCDD2,    NULL);
1409         gpio_request(GPIO_FN_LCDD1,    NULL);
1410         gpio_request(GPIO_FN_LCDD0,    NULL);
1411         gpio_request(GPIO_FN_LCDDISP,  NULL);
1412         gpio_request(GPIO_FN_LCDDCK,   NULL);
1413
1414         gpio_request(GPIO_PORT31, NULL); /* backlight */
1415         gpio_direction_output(GPIO_PORT31, 0); /* off by default */
1416
1417         gpio_request(GPIO_PORT151, NULL); /* LCDDON */
1418         gpio_direction_output(GPIO_PORT151, 1);
1419
1420         /* USBHS0 */
1421         gpio_request(GPIO_FN_VBUS0_0, NULL);
1422         gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
1423
1424         /* USBHS1 */
1425         gpio_request(GPIO_FN_VBUS0_1, NULL);
1426         gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
1427         gpio_request(GPIO_FN_IDIN_1_113, NULL);
1428
1429         /* enable FSI2 port A (ak4643) */
1430         gpio_request(GPIO_FN_FSIAIBT,   NULL);
1431         gpio_request(GPIO_FN_FSIAILR,   NULL);
1432         gpio_request(GPIO_FN_FSIAISLD,  NULL);
1433         gpio_request(GPIO_FN_FSIAOSLD,  NULL);
1434         gpio_request(GPIO_PORT161,      NULL);
1435         gpio_direction_output(GPIO_PORT161, 0); /* slave */
1436
1437         gpio_request(GPIO_PORT9,  NULL);
1438         gpio_request(GPIO_PORT10, NULL);
1439         gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
1440         gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
1441
1442         intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
1443
1444         /* setup FSI2 port B (HDMI) */
1445         gpio_request(GPIO_FN_FSIBCK, NULL);
1446         __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
1447
1448         /* set SPU2 clock to 119.6 MHz */
1449         clk = clk_get(NULL, "spu_clk");
1450         if (!IS_ERR(clk)) {
1451                 clk_set_rate(clk, clk_round_rate(clk, 119600000));
1452                 clk_put(clk);
1453         }
1454
1455         /* enable Keypad */
1456         gpio_request(GPIO_FN_IRQ9_42,   NULL);
1457         irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
1458
1459         /* enable Touchscreen */
1460         gpio_request(GPIO_FN_IRQ7_40,   NULL);
1461         irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
1462
1463         /* enable Accelerometer */
1464         gpio_request(GPIO_FN_IRQ21,     NULL);
1465         irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
1466
1467         /* enable SDHI0 */
1468         gpio_request(GPIO_FN_SDHICD0, NULL);
1469         gpio_request(GPIO_FN_SDHIWP0, NULL);
1470         gpio_request(GPIO_FN_SDHICMD0, NULL);
1471         gpio_request(GPIO_FN_SDHICLK0, NULL);
1472         gpio_request(GPIO_FN_SDHID0_3, NULL);
1473         gpio_request(GPIO_FN_SDHID0_2, NULL);
1474         gpio_request(GPIO_FN_SDHID0_1, NULL);
1475         gpio_request(GPIO_FN_SDHID0_0, NULL);
1476
1477         ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
1478                           IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
1479         if (!ret)
1480                 sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
1481         else
1482                 pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
1483
1484 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
1485         /* enable SDHI1 */
1486         gpio_request(GPIO_FN_SDHICMD1, NULL);
1487         gpio_request(GPIO_FN_SDHICLK1, NULL);
1488         gpio_request(GPIO_FN_SDHID1_3, NULL);
1489         gpio_request(GPIO_FN_SDHID1_2, NULL);
1490         gpio_request(GPIO_FN_SDHID1_1, NULL);
1491         gpio_request(GPIO_FN_SDHID1_0, NULL);
1492 #endif
1493         /* card detect pin for MMC slot (CN7) */
1494         gpio_request(GPIO_PORT41, NULL);
1495         gpio_direction_input(GPIO_PORT41);
1496
1497         /* enable SDHI2 */
1498         gpio_request(GPIO_FN_SDHICMD2, NULL);
1499         gpio_request(GPIO_FN_SDHICLK2, NULL);
1500         gpio_request(GPIO_FN_SDHID2_3, NULL);
1501         gpio_request(GPIO_FN_SDHID2_2, NULL);
1502         gpio_request(GPIO_FN_SDHID2_1, NULL);
1503         gpio_request(GPIO_FN_SDHID2_0, NULL);
1504
1505         /* card detect pin for microSD slot (CN23) */
1506         gpio_request(GPIO_PORT162, NULL);
1507         gpio_direction_input(GPIO_PORT162);
1508
1509         /* MMCIF */
1510         gpio_request(GPIO_FN_MMCD0_0, NULL);
1511         gpio_request(GPIO_FN_MMCD0_1, NULL);
1512         gpio_request(GPIO_FN_MMCD0_2, NULL);
1513         gpio_request(GPIO_FN_MMCD0_3, NULL);
1514         gpio_request(GPIO_FN_MMCD0_4, NULL);
1515         gpio_request(GPIO_FN_MMCD0_5, NULL);
1516         gpio_request(GPIO_FN_MMCD0_6, NULL);
1517         gpio_request(GPIO_FN_MMCD0_7, NULL);
1518         gpio_request(GPIO_FN_MMCCMD0, NULL);
1519         gpio_request(GPIO_FN_MMCCLK0, NULL);
1520
1521         /* enable GPS module (GT-720F) */
1522         gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
1523         gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
1524
1525         /* CEU */
1526         gpio_request(GPIO_FN_VIO_CLK, NULL);
1527         gpio_request(GPIO_FN_VIO_VD, NULL);
1528         gpio_request(GPIO_FN_VIO_HD, NULL);
1529         gpio_request(GPIO_FN_VIO_FIELD, NULL);
1530         gpio_request(GPIO_FN_VIO_CKO, NULL);
1531         gpio_request(GPIO_FN_VIO_D7, NULL);
1532         gpio_request(GPIO_FN_VIO_D6, NULL);
1533         gpio_request(GPIO_FN_VIO_D5, NULL);
1534         gpio_request(GPIO_FN_VIO_D4, NULL);
1535         gpio_request(GPIO_FN_VIO_D3, NULL);
1536         gpio_request(GPIO_FN_VIO_D2, NULL);
1537         gpio_request(GPIO_FN_VIO_D1, NULL);
1538         gpio_request(GPIO_FN_VIO_D0, NULL);
1539
1540         /* HDMI */
1541         gpio_request(GPIO_FN_HDMI_HPD, NULL);
1542         gpio_request(GPIO_FN_HDMI_CEC, NULL);
1543
1544         /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
1545         srcr4 = __raw_readl(SRCR4);
1546         __raw_writel(srcr4 | (1 << 13), SRCR4);
1547         udelay(50);
1548         __raw_writel(srcr4 & ~(1 << 13), SRCR4);
1549
1550         i2c_register_board_info(0, i2c0_devices,
1551                                 ARRAY_SIZE(i2c0_devices));
1552         i2c_register_board_info(1, i2c1_devices,
1553                                 ARRAY_SIZE(i2c1_devices));
1554
1555         sh7372_add_standard_devices();
1556
1557         platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
1558
1559         sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
1560         sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
1561         sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
1562         sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
1563         sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
1564         sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
1565         sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
1566         sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
1567 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
1568         sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
1569 #endif
1570         sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device);
1571         sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
1572
1573         hdmi_init_pm_clock();
1574         sh7372_pm_init();
1575         pm_clk_add(&fsi_device.dev, "spu2");
1576         pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
1577 }
1578
1579 static void __init mackerel_timer_init(void)
1580 {
1581         sh7372_clock_init();
1582         shmobile_timer.init();
1583
1584         /* External clock source */
1585         clk_set_rate(&sh7372_dv_clki_clk, 27000000);
1586 }
1587
1588 static struct sys_timer mackerel_timer = {
1589         .init           = mackerel_timer_init,
1590 };
1591
1592 MACHINE_START(MACKEREL, "mackerel")
1593         .map_io         = mackerel_map_io,
1594         .init_irq       = sh7372_init_irq,
1595         .handle_irq     = shmobile_handle_irq_intc,
1596         .init_machine   = mackerel_init,
1597         .timer          = &mackerel_timer,
1598 MACHINE_END