1 # Copyright 2008 Openmoko, Inc.
2 # Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
6 # temporary until we can eliminate all drivers using it.
9 depends on ARCH_S3C64XX
12 Base platform code for any Samsung S3C64XX device
15 # Configuration options for the S3C6410 CPU
20 Enable S3C6400 CPU support
25 Enable S3C6410 CPU support
31 config S3C64XX_SETUP_SDHCI
32 select S3C64XX_SETUP_SDHCI_GPIO
35 Internal configuration for default SDHCI setup for S3C6400 and
38 # platform specific device setup
40 config S3C64XX_SETUP_I2C0
44 Common setup code for i2c bus 0.
46 Note, currently since i2c0 is always compiled, this setup helper
47 is always compiled with it.
49 config S3C64XX_SETUP_I2C1
52 Common setup code for i2c bus 1.
54 config S3C64XX_SETUP_FB_24BPP
57 Common setup code for S3C64XX with an 24bpp RGB display helper.
59 config S3C64XX_SETUP_SDHCI_GPIO
62 Common setup code for S3C64XX SDHCI GPIO configurations
64 # S36400 Macchine support
71 select S3C64XX_SETUP_SDHCI
73 Machine support for the Samsung SMDK6400
75 # S3C6410 machine support
81 select S3C64XX_SETUP_FB_24BPP
83 Machine support for the A&W6410
88 select SAMSUNG_DEV_ADC
93 select S3C_DEV_USB_HOST
94 select S3C_DEV_USB_HSOTG
96 select HAVE_S3C2410_WATCHDOG
97 select S3C64XX_SETUP_SDHCI
98 select S3C64XX_SETUP_I2C1
99 select S3C64XX_SETUP_FB_24BPP
101 Machine support for the Samsung SMDK6410
103 # At least some of the SMDK6410s were shipped with the card detect
104 # for the MMC/SD slots connected to the same input. This means that
105 # either the boards need to be altered to have channel0 to an alternate
106 # configuration or that only one slot can be used.
109 prompt "SMDK6410 MMC/SD slot setup"
110 depends on MACH_SMDK6410
112 config SMDK6410_SD_CH0
113 bool "Use channel 0 only"
114 depends on MACH_SMDK6410
116 Select CON7 (channel 0) as the MMC/SD slot, as
117 at least some SMDK6410 boards come with the
118 resistors fitted so that the card detects for
119 channels 0 and 1 are the same.
121 config SMDK6410_SD_CH1
122 bool "Use channel 1 only"
123 depends on MACH_SMDK6410
125 Select CON6 (channel 1) as the MMC/SD slot, as
126 at least some SMDK6410 boards come with the
127 resistors fitted so that the card detects for
128 channels 0 and 1 are the same.
132 config SMDK6410_WM1190_EV1
133 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
134 depends on MACH_SMDK6410
136 select REGULATOR_WM8350
137 select S3C24XX_GPIO_EXTRA64
138 select MFD_WM8350_I2C
139 select MFD_WM8350_CONFIG_MODE_0
140 select MFD_WM8350_CONFIG_MODE_3
141 select MFD_WM8352_CONFIG_MODE_0
143 The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
144 and audio daughtercard for the Samsung SMDK6410 reference
145 platform. Enabling this option will build support for this
146 module into the kernel. The presence of the module will be
147 detected at runtime so the the resulting kernel can be used
148 with or without the 1190-EV1 fitted.
150 config SMDK6410_WM1192_EV1
151 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
152 depends on MACH_SMDK6410
154 select REGULATOR_WM831X
155 select S3C24XX_GPIO_EXTRA64
158 The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
159 daughtercard for the Samsung SMDK6410 reference platform.
160 Enabling this option will build support for this module into
161 the kernel. The presence of the daughtercard will be
162 detected at runtime so the the resulting kernel can be used
163 with or without the 1192-EV1 fitted.
169 select S3C_DEV_HSMMC1
170 select S3C64XX_SETUP_I2C1
172 Machine support for the Samsung NCP
179 select S3C_DEV_USB_HOST
180 select S3C64XX_SETUP_FB_24BPP
183 Machine support for the Airgoo HMT