[PATCH] ARM: fixup irqflags breakage after ARM genirq merge
[linux-3.10.git] / arch / arm / mach-pxa / trizeps4.c
1 /*
2  *  linux/arch/arm/mach-pxa/trizeps4.c
3  *
4  *  Support for the Keith und Koep Trizeps4 Module Platform.
5  *
6  *  Author:     Jürgen Schindele
7  *  Created:    20 02, 2006
8  *  Copyright:  Jürgen Schindele
9  *
10  *  This program is free software; you can redistribute it and/or modify
11  *  it under the terms of the GNU General Public License version 2 as
12  *  published by the Free Software Foundation.
13  */
14
15 #include <linux/init.h>
16 #include <linux/kernel.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/interrupt.h>
20 #include <linux/sched.h>
21 #include <linux/bitops.h>
22 #include <linux/fb.h>
23 #include <linux/ioport.h>
24 #include <linux/delay.h>
25 #include <linux/serial_8250.h>
26 #include <linux/mtd/mtd.h>
27 #include <linux/mtd/partitions.h>
28
29 #include <asm/types.h>
30 #include <asm/setup.h>
31 #include <asm/memory.h>
32 #include <asm/mach-types.h>
33 #include <asm/hardware.h>
34 #include <asm/irq.h>
35 #include <asm/sizes.h>
36
37 #include <asm/mach/arch.h>
38 #include <asm/mach/map.h>
39 #include <asm/mach/irq.h>
40 #include <asm/mach/flash.h>
41
42 #include <asm/arch/pxa-regs.h>
43 #include <asm/arch/trizeps4.h>
44 #include <asm/arch/audio.h>
45 #include <asm/arch/pxafb.h>
46 #include <asm/arch/mmc.h>
47 #include <asm/arch/irda.h>
48 #include <asm/arch/ohci.h>
49
50 #include "generic.h"
51
52 /********************************************************************************************
53  * ONBOARD FLASH
54  ********************************************************************************************/
55 static struct mtd_partition trizeps4_partitions[] = {
56         {
57                 .name =         "Bootloader",
58                 .size =         0x00040000,
59                 .offset =       0,
60                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
61         },{
62                 .name =         "Kernel",
63                 .size =         0x00400000,
64                 .offset =       0x00040000
65         },{
66                 .name =         "Filesystem",
67                 .size =         MTDPART_SIZ_FULL,
68                 .offset =       0x00440000
69         }
70 };
71
72 static struct flash_platform_data trizeps4_flash_data[] = {
73         {
74                 .map_name       = "cfi_probe",
75                 .parts          = trizeps4_partitions,
76                 .nr_parts       = ARRAY_SIZE(trizeps4_partitions)
77         }
78 };
79
80 static struct resource flash_resource = {
81         .start  = PXA_CS0_PHYS,
82         .end    = PXA_CS0_PHYS + SZ_64M - 1,
83         .flags  = IORESOURCE_MEM,
84 };
85
86 static struct platform_device flash_device = {
87         .name           = "pxa2xx-flash",
88         .id             = 0,
89         .dev = {
90                 .platform_data = &trizeps4_flash_data,
91         },
92         .resource = &flash_resource,
93         .num_resources = 1,
94 };
95
96 /********************************************************************************************
97  * DAVICOM DM9000 Ethernet
98  ********************************************************************************************/
99 static struct resource dm9000_resources[] = {
100         [0] = {
101                 .start  = TRIZEPS4_ETH_PHYS+0x300,
102                 .end    = TRIZEPS4_ETH_PHYS+0x400-1,
103                 .flags  = IORESOURCE_MEM,
104         },
105         [1] = {
106                 .start  = TRIZEPS4_ETH_PHYS+0x8300,
107                 .end    = TRIZEPS4_ETH_PHYS+0x8400-1,
108                 .flags  = IORESOURCE_MEM,
109         },
110         [2] = {
111                 .start  = TRIZEPS4_ETH_IRQ,
112                 .end    = TRIZEPS4_ETH_IRQ,
113                 .flags  = (IORESOURCE_IRQ | IRQT_RISING),
114         },
115 };
116
117 static struct platform_device dm9000_device = {
118         .name           = "dm9000",
119         .id             = -1,
120         .num_resources  = ARRAY_SIZE(dm9000_resources),
121         .resource       = dm9000_resources,
122 };
123
124 /********************************************************************************************
125  * PXA270 serial ports
126  ********************************************************************************************/
127 static struct plat_serial8250_port tri_serial_ports[] = {
128 #ifdef CONFIG_SERIAL_PXA
129         /* this uses the own PXA driver */
130         {
131                 0,
132         },
133 #else
134         /* this uses the generic 8520 driver */
135         [0] = {
136                 .membase        = (void *)&FFUART,
137                 .irq            = IRQ_FFUART,
138                 .flags          = UPF_BOOT_AUTOCONF,
139                 .iotype         = UPIO_MEM32,
140                 .regshift       = 2,
141                 .uartclk        = (921600*16),
142         },
143         [1] = {
144                 .membase        = (void *)&BTUART,
145                 .irq            = IRQ_BTUART,
146                 .flags          = UPF_BOOT_AUTOCONF,
147                 .iotype         = UPIO_MEM32,
148                 .regshift       = 2,
149                 .uartclk        = (921600*16),
150         },
151         {
152                 0,
153         },
154 #endif
155 };
156
157 static struct platform_device uart_devices = {
158         .name           = "serial8250",
159         .id             = 0,
160         .dev            = {
161                 .platform_data  = tri_serial_ports,
162         },
163         .num_resources  = 0,
164         .resource       = NULL,
165 };
166
167 /********************************************************************************************
168  * PXA270 ac97 sound codec
169  ********************************************************************************************/
170 static struct platform_device ac97_audio_device = {
171         .name           = "pxa2xx-ac97",
172         .id             = -1,
173 };
174
175 static struct platform_device * trizeps4_devices[] __initdata = {
176         &flash_device,
177         &uart_devices,
178         &dm9000_device,
179         &ac97_audio_device,
180 };
181
182 #ifdef CONFIG_MACH_TRIZEPS4_CONXS
183 static short trizeps_conxs_bcr;
184
185 /* PCCARD power switching supports only 3,3V */
186 void board_pcmcia_power(int power)
187 {
188         if (power) {
189                 /* switch power on, put in reset and enable buffers */
190                 trizeps_conxs_bcr |= power;
191                 trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
192                 trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
193                 ConXS_BCR = trizeps_conxs_bcr;
194                 /* wait a little */
195                 udelay(2000);
196                 /* take reset away */
197                 trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
198                 ConXS_BCR = trizeps_conxs_bcr;
199                 udelay(2000);
200         } else {
201                 /* put in reset */
202                 trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
203                 ConXS_BCR = trizeps_conxs_bcr;
204                 udelay(1000);
205                 /* switch power off */
206                 trizeps_conxs_bcr &= ~(0xf);
207                 ConXS_BCR = trizeps_conxs_bcr;
208
209         }
210         pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
211 }
212
213 /* backlight power switching for LCD panel */
214 static void board_backlight_power(int on)
215 {
216         if (on) {
217                 trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
218         } else {
219                 trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
220         }
221         pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
222         ConXS_BCR = trizeps_conxs_bcr;
223 }
224
225 /* Powersupply for MMC/SD cardslot */
226 static void board_mci_power(struct device *dev, unsigned int vdd)
227 {
228         struct pxamci_platform_data* p_d = dev->platform_data;
229
230         if (( 1 << vdd) & p_d->ocr_mask) {
231                 pr_debug("%s: on\n", __FUNCTION__);
232                 /* FIXME fill in values here */
233         } else {
234                 pr_debug("%s: off\n", __FUNCTION__);
235                 /* FIXME fill in values here */
236         }
237 }
238
239 static short trizeps_conxs_ircr;
240
241 /* Switch modes and Power for IRDA receiver */
242 static void board_irda_mode(struct device *dev, int mode)
243 {
244         unsigned long flags;
245
246         local_irq_save(flags);
247         if (mode & IR_SIRMODE) {
248                 /* Slow mode */
249                 trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
250         } else if (mode & IR_FIRMODE) {
251                 /* Fast mode */
252                 trizeps_conxs_ircr |= ConXS_IRCR_MODE;
253         }
254         if (mode & IR_OFF) {
255                 trizeps_conxs_ircr |= ConXS_IRCR_SD;
256         } else {
257                 trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
258         }
259         /* FIXME write values to register */
260         local_irq_restore(flags);
261 }
262
263 #else
264 /* for other baseboards define dummies */
265 void board_pcmcia_power(int power)      {;}
266 #define board_backlight_power           NULL
267 #define board_mci_power                 NULL
268 #define board_irda_mode                 NULL
269
270 #endif          /* CONFIG_MACH_TRIZEPS4_CONXS */
271 EXPORT_SYMBOL(board_pcmcia_power);
272
273 static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data)
274 {
275         int err;
276         /* setup GPIO for PXA27x MMC controller */
277         pxa_gpio_mode(GPIO32_MMCCLK_MD);
278         pxa_gpio_mode(GPIO112_MMCCMD_MD);
279         pxa_gpio_mode(GPIO92_MMCDAT0_MD);
280         pxa_gpio_mode(GPIO109_MMCDAT1_MD);
281         pxa_gpio_mode(GPIO110_MMCDAT2_MD);
282         pxa_gpio_mode(GPIO111_MMCDAT3_MD);
283
284         pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
285
286         err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
287                           IRQF_DISABLED | IRQF_TRIGGER_RISING,
288                           "MMC card detect", data);
289         if (err) {
290                 printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
291                 return -1;
292         }
293         return 0;
294 }
295
296 static void trizeps4_mci_exit(struct device *dev, void *data)
297 {
298         free_irq(TRIZEPS4_MMC_IRQ, data);
299 }
300
301 static struct pxamci_platform_data trizeps4_mci_platform_data = {
302         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
303         .init           = trizeps4_mci_init,
304         .exit           = trizeps4_mci_exit,
305         .setpower       = board_mci_power,
306 };
307
308 static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
309         .transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
310         .transceiver_mode = board_irda_mode,
311 };
312
313 static int trizeps4_ohci_init(struct device *dev)
314 {
315         /* setup Port1 GPIO pin. */
316         pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);  /* USBHPWR1 */
317         pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
318
319         /* Set the Power Control Polarity Low and Power Sense
320            Polarity Low to active low. */
321         UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
322                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
323
324         return 0;
325 }
326
327 static void trizeps4_ohci_exit(struct device *dev)
328 {
329         ;
330 }
331
332 static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
333         .port_mode      = PMM_PERPORT_MODE,
334         .init           = trizeps4_ohci_init,
335         .exit           = trizeps4_ohci_exit,
336 };
337
338 static struct map_desc trizeps4_io_desc[] __initdata = {
339         {       /* ConXS CFSR */
340                 .virtual        = TRIZEPS4_CFSR_VIRT,
341                 .pfn            = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
342                 .length         = 0x00001000,
343                 .type           = MT_DEVICE
344         },
345         {       /* ConXS BCR */
346                 .virtual        = TRIZEPS4_BOCR_VIRT,
347                 .pfn            = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
348                 .length         = 0x00001000,
349                 .type           = MT_DEVICE
350         },
351         {       /* ConXS IRCR */
352                 .virtual        = TRIZEPS4_IRCR_VIRT,
353                 .pfn            = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
354                 .length         = 0x00001000,
355                 .type           = MT_DEVICE
356         },
357         {       /* ConXS DCR */
358                 .virtual        = TRIZEPS4_DICR_VIRT,
359                 .pfn            = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
360                 .length         = 0x00001000,
361                 .type           = MT_DEVICE
362         },
363         {       /* ConXS UPSR */
364                 .virtual        = TRIZEPS4_UPSR_VIRT,
365                 .pfn            = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
366                 .length         = 0x00001000,
367                 .type           = MT_DEVICE
368         }
369 };
370
371 static struct pxafb_mach_info sharp_lcd __initdata = {
372     .pixclock           = 78000,
373     .xres               = 640,
374     .yres               = 480,
375     .bpp                = 8,
376     .hsync_len          = 4,
377     .left_margin        = 4,
378     .right_margin       = 4,
379     .vsync_len          = 2,
380     .upper_margin       = 0,
381     .lower_margin       = 0,
382     .sync               = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
383     .cmap_greyscale     = 0,
384     .cmap_inverse       = 0,
385     .cmap_static        = 0,
386     .lccr0              = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
387     .lccr3              = 0x0340ff02,
388     .pxafb_backlight_power = board_backlight_power,
389 };
390
391 static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
392 {
393 }
394
395 static void __init trizeps4_init(void)
396 {
397         platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
398
399         set_pxa_fb_info(&sharp_lcd);
400
401         pxa_set_mci_info(&trizeps4_mci_platform_data);
402         pxa_set_ficp_info(&trizeps4_ficp_platform_data);
403         pxa_set_ohci_info(&trizeps4_ohci_platform_data);
404 }
405
406 static void __init trizeps4_map_io(void)
407 {
408         pxa_map_io();
409         iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
410
411         /* for DiskOnChip */
412         pxa_gpio_mode(GPIO15_nCS_1_MD);
413
414         /* for off-module PIC on ConXS board */
415         pxa_gpio_mode(GPIO_PIC | GPIO_IN);
416
417         /* UCB1400 irq */
418         pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
419
420         /* for DM9000 LAN */
421         pxa_gpio_mode(GPIO78_nCS_2_MD);
422         pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
423
424         /* for PCMCIA device */
425         pxa_gpio_mode(GPIO_PCD | GPIO_IN);
426         pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
427
428         /* for I2C adapter */
429         pxa_gpio_mode(GPIO117_I2CSCL_MD);
430         pxa_gpio_mode(GPIO118_I2CSDA_MD);
431
432         /* MMC_DET s.o. */
433         pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
434
435         /* whats that for ??? */
436         pxa_gpio_mode(GPIO79_nCS_3_MD);
437
438         pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);          /* LED1 */
439         pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);          /* LED2 */
440
441 #ifdef CONFIG_MACH_TRIZEPS4_CONXS
442 #ifdef CONFIG_IDE_PXA_CF
443         /* if boot direct from compact flash dont disable power */
444         trizeps_conxs_bcr = 0x0009;
445 #else
446         /* this is the reset value */
447         trizeps_conxs_bcr = 0x00A0;
448 #endif
449         ConXS_BCR = trizeps_conxs_bcr;
450 #endif
451
452         PWER  = 0x00000002;
453         PFER  = 0x00000000;
454         PRER  = 0x00000002;
455         PGSR0 = 0x0158C000;
456         PGSR1 = 0x00FF0080;
457         PGSR2 = 0x0001C004;
458         /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
459         PCFR |= PCFR_OPDE;
460 }
461
462 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
463         /* MAINTAINER("Jürgen Schindele") */
464         .phys_io        = 0x40000000,
465         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
466         .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
467         .fixup          = trizeps4_fixup,
468         .init_machine   = trizeps4_init,
469         .map_io         = trizeps4_map_io,
470         .init_irq       = pxa_init_irq,
471         .timer          = &pxa_timer,
472 MACHINE_END
473