platform: tegra: add cy8c_panel driver
[linux-3.10.git] / Documentation / devicetree / bindings / platform / tegra / panel-cy8c.txt
1 CY8C microcontroller driven panel power sequence driver
2
3 Required properties:
4 - compatible : should be "nvidia,cy8c_panel".
5
6 Sub-node properties:
7 - reg : i2c regmap address (app firmware)
8 - enable-gpio : gpio used to enable uC operations.
9         This gpio must remain high for as long as the
10         panel is enabled. It may be deasserted after
11         the panel is disabled.
12
13 Examples:
14         i2c@7000c000 {
15                 cy8c_panel@09 {
16                         compatible = "nvidia,cy8c_panel";
17                         reg = <0x09>;
18                         enable-gpio = <&gpio TEGRA_GPIO(K, 1) 0>;
19                         #address-cells = <1>;
20                         #size-cells = <0>;
21                 };
22         };
23 };