linux-2.6.git
2013-11-07 Hyungwoo Yang ARM: tegra: tagratab: Update skin throttling table
2013-11-07 Robert Collins input: touch: maxim: fix daemon crashing issue
2013-11-07 Bo Kim Revert "input: touch: maxim_sti: boot fusion from init"
2013-11-07 Bo Kim Revert "input: touch: maxim_sti: Shutdown safely"
2013-11-07 Bo Kim Revert "input: touch: maxim_sti: Check thread stop...
2013-11-06 Jinyoung Park cpufreq: interactive: check freq with policy->cur
2013-11-06 Harry Hong RM: tegratab: config: re-enable IKCONFIG_PROC
2013-11-05 Harry Hong ARM: tegratab: config: disable IKCONFIG_PROC
2013-11-05 Min-wuk Lee input: touch: maxim_sti: dvdd_on init val change
2013-11-04 Karl Kim media:video:tegra: ov5693 fuse ID support
2013-11-04 Karl Kim media:video:tegra: ov7695 new tuning value.
2013-11-01 Karl Kim media: video: tegra: ov5693 change the setting value
2013-10-31 Shobek Sam... misc: ti-st: Create rx_list before all channels are...
2013-10-31 Shobek Sam... misc: ti-st: Send timeout error if ST registration...
2013-10-31 Louis Li arm: tegra: wakeup offender monitoring
2013-10-31 Louis Li android-alarm: find the rtc wakeup offender
2013-10-31 Jiukai Ma arm: tegra: tegratab: add tegra wakeup monitor support
2013-10-30 Pavan Kunapuli mmc: sdhci: Increase SW timeout for sanitize cmd
2013-10-29 Hyongbin Kim video: tegra: Remove delay if power is enabled
2013-10-28 Joshua Widen media:video:tegra: ov5693 add 2560x1440 HDR mode
2013-10-24 Min-wuk Lee tegra: video: LGD 7" T5 and T6 delay fix.
2013-10-24 Min-wuk Lee tegra: video: remove LGD 7" T4 in some condition
2013-10-24 Rakesh Iyer video: tegra: dc: dont restore windows in unblank
2013-10-24 Min-wuk Lee video: tegra: dc: nvhdcp off in shutdown
2013-10-24 Min-wuk Lee ARM: dts: Tegra114: do not enable DC1 in DC probe
2013-10-24 Min-wuk Lee tegra: video: hdmi: WAR: check hdmi validity
2013-10-24 Min-wuk Lee ARM: tegra: tegratab: skip dc1 register in charging
2013-10-24 Harry Hong ARM: dts: tegratab: update hdmi tmds config
2013-10-24 Harry Hong ARM: dts: tegratab: Adding 480p tmds setting
2013-10-23 David Yu input: misc: mpu: add load cal sysfs
2013-10-23 Harry Hong ARM: tegra: config: tegratab: Enable CONFIG.
2013-10-23 Yong Goo Yi arm: tegra: tegratab: KEY_UNKNOWN as default wakeup_key
2013-10-23 Yong Goo Yi arm: tegra: tegratab: change avdd_lcd to 3.16V
2013-10-23 Yong Goo Yi tegra: video: prevent duplicated enabling hdmi 5V
2013-10-23 Yong Goo Yi arm: tegra: tegratab: Turn off sd card vddio_sdmmc
2013-10-23 Yong Goo Yi arm: tegra: tegratab: disable OC2 powergood alarm
2013-10-21 Hyongbin Kim ARM: Tegra: TT-power: set battery id check flag
2013-10-21 Hyongbin Kim max17048: add sysfs for check battery capacity
2013-10-21 Hyongbin Kim max17048: update temp change promptly
2013-10-21 Hyongbin Kim power: max17048: add battery temperature property
2013-10-21 Yong Goo Yi ARM: tegra: tegratab: change VD_DDR_R to 1.38V
2013-10-21 Jinyoung Park drivers: misc: therm_est: use late_initcall_sync
2013-10-21 Jinyoung Park ARM: dts: tegra114: tegratab: Update Micron dvfs table...
2013-10-21 Jinyoung Park ARM: dts: tegra114: tegratab: Update Micron dvfs table...
2013-10-21 Jinyoung Park ARM: dts: tegra114: Add tegratab dvfs table in DT
2013-10-21 Jinyoung Park ARM: tegra: clock: Use ram code for TegraTab
2013-10-21 Jinyoung Park ARM: tegra: clock: Correct wrong pointer passing
2013-10-21 Jinyoung Park ARM: tegra: cpu: Ensure CPU freq with suspend freq...
2013-10-21 Jinyoung Park cpufreq: Set same governor as a first CPU when CPU...
2013-10-21 Jinyoung Park cpufreq: conservative: Ensure requested_freq within...
2013-10-21 Jinyoung Park ARM: tegra: clock: Support EMC freq min/max constraints...
2013-10-21 Jinyoung Park PM QoS: Add EMC freq min/max as PM QoS params
2013-10-21 Jinyoung Park ARM: tegra: tegratab: Set proper skin coeff to each...
2013-10-21 Jinyoung Park ARM: tegra: tegratab: Add Tskin coefficients for P1640 A02
2013-10-21 Hyongbin Kim ARM: Tegra: TT-power: set sysedp throttle
2013-10-21 Bo Kim ARM: tegra: enabling EDP_FRAMEWORK for tegratab
2013-10-21 Hyongbin Kim ARM: tegra: adding tegratab sysedp core lite
2013-10-21 Hyongbin Kim power: max17048: sysedp throttle in low SOC
2013-10-21 Hyongbin Kim edp: tegra_core_lite: add tegra_core_lite
2013-10-18 Hyongbin Kim ARM: Tegra: usb_phy: WAR: Apple compatibility charger...
2013-10-18 Hyongbin Kim ARM: TT: Skip hdmi init in charger boot
2013-10-18 Hyongbin Kim ARM: TT: Reduce charger mode boot time
2013-10-18 Hyongbin Kim ARM: tegra: usb: reduce hs_squelch level
2013-10-16 David Yu ARM: tegra: config: tegratab: Enable MMC freq scaling
2013-10-16 Hyongbin Kim ARM: mach-tegra: tegra11_emc: Set max emc rate to boot...
2013-10-16 Min-wuk Lee Revert "ARM: tegra: dc: program active mux for cursor"
2013-10-16 Min-wuk Lee ARM: tegra: tegratab: deliver charging info for pwm bl
2013-10-15 Jinyoung Park ARM: tegra: tegratab: Don't register touch driver if...
2013-10-15 Alvin Park Revert "usb: gadget: mtp: increase MTP buffers"
2013-10-15 Alvin Park driver: modified ov7695 orientation
2013-10-14 Jon McCaffrey ARM: tegra: dc: program active mux for cursor
2013-10-14 Hyongbin Kim ARM: Tegra: TT-power: set current threshold
2013-10-14 Hyongbin Kim ARM: Tegra: TT-power: Apply TempCoCold, TempCoHot
2013-10-14 Hyongbin Kim ARM: Tegra: TT-power: new model data of max17048
2013-10-14 Hyongbin Kim power: max17048: disable SC alert in LP0
2013-10-14 Hyongbin Kim power: max17048: set current threshold at low SOC
2013-10-14 Hyongbin Kim hwmon: ina230: add export set current threshold
2013-10-14 Hyongbin Kim power: max17048: Set default RCOMP when power off
2013-10-14 Hyongbin Kim power: max17048: reduce debug message
2013-10-14 Hyongbin Kim power: max17048: Use Tskin instead of Batt temp
2013-10-14 Hyongbin Kim power: max17048: apply RCOMP for temp compensation
2013-10-14 Hyongbin Kim power: bq2419x: Sysfs for set charge complete SOC
2013-10-14 Hyongbin Kim ARM: Tegra: TT-power: Set pdata value of bq24192x
2013-10-14 Hyongbin Kim Revert "ARM: tegra: PMU POWER off when boot with charge...
2013-10-14 Hyongbin Kim power: bq2419x: Not use charging termination
2013-10-14 Hyongbin Kim power: bq2419X: Support BQ24193 version
2013-10-14 Hyongbin Kim power: bq2419x: Set max charge current to 3.136A
2013-10-14 Hyongbin Kim hwmon: ina230: add export get current fuction
2013-10-14 Hyongbin Kim power: max17048: fix show charging icon state
2013-10-14 Hyongbin Kim power: max17048: Add export get vcell fuction
2013-10-14 Hyongbin Kim power: max17048: Add export soc get fuction
2013-10-14 Hyongbin Kim power: max17048: Clear repeated voltage low alert
2013-10-14 Hyongbin Kim power: bq2419x: Set DCP charging current to 2A.
2013-10-13 Min-wuk Lee ARM: dts: tegratab: change default brightness
2013-10-13 Min-wuk Lee ARM: dts: tegratab: update CMU calibration data
2013-10-13 Min-wuk Lee tegra: video: hdmi: WAR: ensure hdcp register access...
2013-10-13 Min-wuk Lee tegra: video: lgd-wxga-7 avdd power sequence fix
2013-10-13 Min-wuk Lee tegra: video: bug fix for sd_brightness usage
2013-10-13 Min-wuk Lee ARM: dts: tegratab: Set CMU csc matrix to normalized.
2013-10-13 Min-wuk Lee ARM: dts: tegratab: pwfm and pwm-bl node
next