11 years agoAdd kernel/notifier.c
Alexey Dobriyan [Fri, 19 Oct 2007 06:39:16 +0000]
Add kernel/notifier.c

There is separate notifier header, but no separate notifier .c file.

Extract notifier code out of kernel/sys.c which will remain for
misc syscalls I hope. Merge kernel/die_notifier.c into kernel/notifier.c.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agosetup vma->vm_page_prot by vm_get_page_prot()
Coly Li [Fri, 19 Oct 2007 06:39:15 +0000]
setup vma->vm_page_prot by vm_get_page_prot()

This patch uses vm_get_page_prot() to setup vma->vm_page_prot.

Though inside vm_get_page_prot() the protection flags is AND with
(VM_READ|VM_WRITE|VM_EXEC|VM_SHARED), it does not hurt correct code.

Signed-off-by: Coly Li <coyli@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoremove unused flush_tlb_pgtables
Benjamin Herrenschmidt [Fri, 19 Oct 2007 06:39:14 +0000]
remove unused flush_tlb_pgtables

Nobody uses flush_tlb_pgtables anymore, this patch removes all remaining
traces of it from all archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agokmap leak fix for x86_32 kdump
Fernando Luis Vázquez Cao [Fri, 19 Oct 2007 06:39:14 +0000]
kmap leak fix for x86_32 kdump

copy_oldmem_page should not return leaving a page frame from the
previous kernel mapped.

Signed-off-by: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp>
Acked-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agops3av: remove unused fields in ps3av_monitor_quirks
Geert Uytterhoeven [Fri, 19 Oct 2007 06:39:13 +0000]
ps3av: remove unused fields in ps3av_monitor_quirks

Remove the `clear_50' and `clear_vesa' fields of struct
ps3av_monitor_quirk, as they're currently unused.  We can always re-add
them when we really need them.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoConsole keyboard events and accessibility
Samuel Thibault [Fri, 19 Oct 2007 06:39:12 +0000]
Console keyboard events and accessibility

Some blind people use a kernel engine called Speakup which uses hardware
synthesis to speak what gets displayed on the screen.  They use the
PC keyboard to control this engine (start/stop, accelerate, ...) and
also need to get keyboard feedback (to make sure to know what they are
typing, the caps lock status, etc.)

Up to now, the way it was done was very ugly.  Below is a patch to add a
notifier list for permitting a far better implementation, see ChangeLog
above for details.

You may wonder why this can't be done at the input layer.  The problem
is that what people want to monitor is the console keyboard, i.e. all
input keyboards that got attached to the console, and with the currently
active keymap (i.e. keysyms, not only keycodes).

This adds a keyboard notifier that such modules can use to get the keyboard
events and possibly eat them, at several stages:

- keycodes: even before translation into keysym.
- unbound keycodes: when no keysym is bound.
- unicode: when the keycode would get translated into a unicode character.
- keysym: when the keycode would get translated into a keysym.
- post_keysym: after the keysym got interpreted, so as to see the result
  (caps lock, etc.)

This also provides access to k_handler so as to permit simulation of
keypresses.

[akpm@linux-foundation.org: various fixes]
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoput declaration of put_filesystem() in fs.h
Miklos Szeredi [Fri, 19 Oct 2007 06:39:11 +0000]
put declaration of put_filesystem() in fs.h

Declarations go into headers.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Ram Pai <linuxram@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoadvansys: depends on VIRT_TO_BUS
Andrew Morton [Fri, 19 Oct 2007 06:39:10 +0000]
advansys: depends on VIRT_TO_BUS

Fix powerpc allmodconfig build: advansys requires virt_to_bus() but powerpc
doesn't implement it.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Fri, 19 Oct 2007 02:31:54 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  pcnet32: remove private net_device_stats structure
  vortex_up should initialize "err"
  pcnet32: remove compile warnings in non-napi mode
  pcnet32: fix non-napi packet reception
  fix EMAC driver for proper napi_synchronize API
  sky2: shutdown cleanup
  napi_synchronize: waiting for NAPI
  forcedeth msi bugfix
  gianfar: fix obviously wrong #ifdef CONFIG_GFAR_NAPI placement
  fs_enet: Update for API changes
  gianfar: remove orphan struct.
  forcedeth: fix rx-work condition in nv_rx_process_optimized() too

11 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Thu, 18 Oct 2007 23:00:02 +0000]
Merge /pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (37 commits)
  ide: set drive->autotune in ide_pci_setup_ports()
  triflex: always tune PIO
  opti621: always tune PIO
  cy82c693: always tune PIO
  cs5520: always tune PIO
  alim15x3: always tune PIO
  ide: add IDE_HFLAG_LEGACY_IRQS host flag
  ide: add IDE_HFLAG_SERIALIZE host flag
  ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flag
  piix: add DECLARE_ICH_DEV() macro
  pdc202xx_old: add DECLARE_PDC2026X_DEV() macro
  pdc202xx_new: add DECLARE_PDCNEW_DEV() macro
  aec62xx: no need to disable UDMA in ->init_hwif method for ATP850UF
  ide: remove .init_setup from ide_pci_device_t
  serverworks: remove ->init_setup
  scc_pata: remove ->init_setup
  pdc202xx_old: remove ->init_setup
  pdc202xx_new: remove ->init_setup
  hpt366: remove ->init_setup
  cmd64x: remove ->init_setup
  ...

11 years agoide: set drive->autotune in ide_pci_setup_ports()
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:12 +0000]
ide: set drive->autotune in ide_pci_setup_ports()

Majority of host drivers using IDE PCI layer set drive->autotune, the only
exceptions are:

generic.c
ns87415.c
rz1000.c
trm290.c
* no ->set_pio_mode method

it821x.c:
* if memory allocation fails drive->autotune won't be set
  (but there also won't be ->set_pio_mode method in such case)

piix.c:
* MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method)

However if there is no ->set_pio_mode method there are no changes in behavior
w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agotriflex: always tune PIO
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:11 +0000]
triflex: always tune PIO

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoopti621: always tune PIO
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:11 +0000]
opti621: always tune PIO

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agocy82c693: always tune PIO
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:11 +0000]
cy82c693: always tune PIO

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agocs5520: always tune PIO
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:11 +0000]
cs5520: always tune PIO

Since cs5520 uses VDMA best PIO mode was tuned anyway by ide_dma_check()
but only if DMA was successfully initialized.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoalim15x3: always tune PIO
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:11 +0000]
alim15x3: always tune PIO

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add IDE_HFLAG_LEGACY_IRQS host flag
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:11 +0000]
ide: add IDE_HFLAG_LEGACY_IRQS host flag

Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set
hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert
atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it.

While at it:

* In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add IDE_HFLAG_SERIALIZE host flag
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:10 +0000]
ide: add IDE_HFLAG_SERIALIZE host flag

Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set
hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers
to use it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add IDE_HFLAG_ERROR_STOPS_FIFO host flag
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:10 +0000]
ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flag

Add IDE_HFLAG_ERROR_STOPS_FIFO host flag and use it instead
of hwif->err_stops_fifo.  As a side-effect this change fixes
hwif->err_stops_fifo not being restored by ide_hwif_restore().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agopiix: add DECLARE_ICH_DEV() macro
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:10 +0000]
piix: add DECLARE_ICH_DEV() macro

Add DECLARE_ICH_DEV() macro.

While at it:

* Add init_hwif_ich() (->init_hwif method) for ICH controllers.

* Rename init_chipset_piix() to init_chipset_ich() and use it only for
  ICH controllers.

* Remove no longer needed piix_is_ichx() helper.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agopdc202xx_old: add DECLARE_PDC2026X_DEV() macro
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:10 +0000]
pdc202xx_old: add DECLARE_PDC2026X_DEV() macro

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agopdc202xx_new: add DECLARE_PDCNEW_DEV() macro
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:10 +0000]
pdc202xx_new: add DECLARE_PDCNEW_DEV() macro

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoaec62xx: no need to disable UDMA in ->init_hwif method for ATP850UF
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:10 +0000]
aec62xx: no need to disable UDMA in ->init_hwif method for ATP850UF

* No need to disable UDMA in ->init_hwif method for ATP850UF (and since we
  now always tune PIO it will be disabled by ->set_pio_mode calls anyway).

* Bump driver version.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: remove .init_setup from ide_pci_device_t
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:09 +0000]
ide: remove .init_setup from ide_pci_device_t

Now that all users were fixed we can safely remove it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoserverworks: remove ->init_setup
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:09 +0000]
serverworks: remove ->init_setup

Merge init_setup_{svwks,csb6}() into svwks_init_one().

While at it:

* Remove redundant dev->device checks.

* Operate on a local copy of serverworks_chipsets[] entry.

* Use pci_resource_start().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoscc_pata: remove ->init_setup
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:09 +0000]
scc_pata: remove ->init_setup

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agopdc202xx_old: remove ->init_setup
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:09 +0000]
pdc202xx_old: remove ->init_setup

* Split off pdc202ata4_fixup_irq() helper from init_setup_pdc202ata4().

* Merge init_setup_{pdc202ata4,pdc20265,pdc202xx}() into pdc202xx_init_one().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agopdc202xx_new: remove ->init_setup
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:09 +0000]
pdc202xx_new: remove ->init_setup

* Split off pdc20270_get_dev2() helper from init_setup_pdc20270().

* Merge init_setup_{pdcnew,pdc20270,pdc20276}() into pdc202new_init_one().

While at it:

* Change KERN_ level of interrupt fixup message from KERN_WARNING to KERN_INFO.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agohpt366: remove ->init_setup
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:09 +0000]
hpt366: remove ->init_setup

* Split off hpt{374,371,366}_init() helper from init_setup_hpt{374,371,366}().

* Merge init_setup_{374,372n,371,372a,302,366}() into hpt366_init_one().

While at it:

* Use "HPT36x" name for HPT366/HPT368 chipsets.

* Add .chip_name to struct hpt_info and use it to set set d->name.

* Convert .max_ultra in struct hpt_info to .udma_mask and use it to set
  d->udma_mask.

* Fix hpt302 to use HPT302_ALLOW_ATA133_6 define.

* Change HPT366/HPT374 interrupt fixup message from KERN_WARNING to KERN_INFO.

* Use the second hpt366_chipsets[] entry for HPT37x chipsets using HPT36x PCI
  device ID and fix .enablebits/.host_flags for HPT36x hpt366_chipsets[] entry.

* Bump driver version.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agocmd64x: remove ->init_setup
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:09 +0000]
cmd64x: remove ->init_setup

Merge init_setup_{cmd64x,cmd646}() into cmd64x_init_one().

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoaec62xx: remove ->init_setup
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:08 +0000]
aec62xx: remove ->init_setup

Merge init_setup_{aec62xx,aec6x80}() into aec62xx_init_one().

While at it:

* Use id->driver_data instead of dev->device.

* Use ATA_UDMA6 define.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: use I/O ops directly part #2 (take 2)
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:08 +0000]
ide: use I/O ops directly part #2 (take 2)

v2:
- bump host driver versions (as suggested by Sergei)
- use I/O ops directly in drivers/ide/setup-pci.c

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: use pci_dev->revision
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:08 +0000]
ide: use pci_dev->revision

Some places were using PCI_CLASS_REVISION instead of PCI_REVISION_ID so
they were not converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65.

Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agocmd64x: Use dev->revision
Auke Kok [Thu, 18 Oct 2007 22:30:08 +0000]
cmd64x: Use dev->revision

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoamd74xx: Omit PCI_REVISION_ID read
Auke Kok [Thu, 18 Oct 2007 22:30:07 +0000]
amd74xx: Omit PCI_REVISION_ID read

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2)
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:07 +0000]
ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2)

* Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t.

* Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in
  setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif
  method may still override them).

* Convert IDE PCI host drivers to use ide_pci_device_t DMA masks.

While at it:

* Use ATA_{UDMA,MWDMA,SWDMA}* defines.

* hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345.

* serverworks.c: fix DMA masks being set before checking DMA base.

v2:
* Add missing masks to DECLARE_GENERIC_PCI_DEV() macro.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agopdc202xx_old: remove broken SWDMA support
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:07 +0000]
pdc202xx_old: remove broken SWDMA support

Documentation doesn't mention SWDMA and moreover all timings used
for SWDMA modes were over-clocked when compared to ATA spec.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:07 +0000]
ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags

Add IDE_HFLAG_NO_LBA48[_DMA] host flags, use it instead of hwif->no_lba48[_dma]
and then remove no longer needed hwif->no_lba48[_dma].  As a side-effect
this change fixes hwif->no_lba48_dma not being restored by ide_hwif_restore().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: remove ->init_setup_dma from ide_pci_device_t (take 2)
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:07 +0000]
ide: remove ->init_setup_dma from ide_pci_device_t (take 2)

* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag.

* Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base()
  and use d->name instead of hwif->cds->name.

* Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in
  ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer
  needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma.

  This fixes PCI bus-mastering not being checked for CS5510/CS5520 hosts.

v2:
* It is wrong to check simplex bits on CS5510/CS5520 as v1 did.
  (Noticed by Alan).

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flags
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:06 +0000]
ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flags

Add IDE_HFLAG_NO_{DMA,AUTODMA} host flags.  Convert all host drivers using
ide_pci_device_t to use these flags instead of d->autodma and then remove no
longer needed d->autodma.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add IDE_HFLAG_BOOTABLE host flag
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:06 +0000]
ide: add IDE_HFLAG_BOOTABLE host flag

Add IDE_HFLAG_BOOTABLE host flag and IDE_HFLAG_OFF_BOARD define.  Convert
all host drivers using ide_pci_device_t to use IDE_HFLAG_{BOOTABLE,OFF_BOARD}
instead of d->bootable and then remove no longer needed d->bootable.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add IDE_HFLAG_NO_ATAPI_DMA host flag
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:06 +0000]
ide: add IDE_HFLAG_NO_ATAPI_DMA host flag

Add IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which
don't support ATAPI DMA.  Then remove no longer needed hwif->atapi_dma.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:06 +0000]
ide: add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver

* Add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver
  and use it to cleanup generic_chipsets[].

* Remove dead/obsolete code while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agosiimage: bump driver version
Bartlomiej Zolnierkiewicz [Thu, 18 Oct 2007 22:30:05 +0000]
siimage: bump driver version

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: Fix cs5535 driver accessing beyond array boundary
Benjamin Herrenschmidt [Thu, 18 Oct 2007 22:30:05 +0000]
ide: Fix cs5535 driver accessing beyond array boundary

The cs5535 uses an incorrect construct to access the other drive of a pair,
causing it to access beyond an array boundary on the secondary interface.

This fixes it by using the new ide_get_paired_drive() helper instead.

Bart: patch description fixes

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@osdl.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: Fix siimage driver accessing beyond array boundary
Benjamin Herrenschmidt [Thu, 18 Oct 2007 22:30:05 +0000]
ide: Fix siimage driver accessing beyond array boundary

The siimage uses an incorrect construct to access the other drive of a pair,
causing it to access beyond an array boundary on the secondary interface.

This fixes it by using the new ide_get_paired_drive() helper instead.

Bart: patch description fixes

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@osdl.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: Add ide_get_paired_drive() helper
Benjamin Herrenschmidt [Thu, 18 Oct 2007 22:30:05 +0000]
ide: Add ide_get_paired_drive() helper

This adds a helper to get to the "other" drive on a pair connected
to a given hwif.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@osdl.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoMerge ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
Linus Torvalds [Thu, 18 Oct 2007 22:12:41 +0000]
Merge ssh:///linux/kernel/git/tglx/linux-2.6-hrt

* ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  hrtimer: hook compat_sys_nanosleep up to high res timer code
  hrtimer: Rework hrtimer_nanosleep to make sys_compat_nanosleep easier

11 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Thu, 18 Oct 2007 22:08:35 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] kill ata_sg_is_last()
  Update libata driver for bf548 atapi controller against the 2.6.24 tree.
  libata-sff: Correct use of check_status()
  drivers/ata: add support to Freescale 3.0Gbps SATA Controller
  pata_acpi: fix build breakage if !CONFIG_PM

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Thu, 18 Oct 2007 21:56:25 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  mv watchdog tree under drivers

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
Linus Torvalds [Thu, 18 Oct 2007 21:54:03 +0000]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: reduce schedstat variable overhead a bit
  sched: add KERN_CONT annotation
  sched: cleanup, make struct rq comments more consistent
  sched: cleanup, fix spacing
  sched: fix return value of wait_for_completion_interruptible()

11 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Thu, 18 Oct 2007 21:51:02 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] time: Move R4000 clockevent device code to separate configurable file
  [MIPS] time: Delete dead cycles_per_jiffy, mips_timer_ack and null_timer_ack
  [MIPS] IP32: Retire use of plat_timer_setup.
  [MIPS] Jazz: Retire use of plat_timer_setup.
  [MIPS] IP27: Convert to clock_event_device.
  [MIPS] JMR3927: Convert to clock_event_device.
  [MIPS] Always do the ARC64_TWIDDLE_PC thing.

11 years agoInclude <linux/backing-dev.h> in mm/filemap.c
Linus Torvalds [Thu, 18 Oct 2007 21:47:32 +0000]
Include <linux/backing-dev.h> in mm/filemap.c

It gets it indirectly from blkdev.h when CONFIG_BLOCK is enabled, but it
needs it unconditionally for the definition of mapping_cap_writeback_dirty.

Noticed and bisected down to 4af3c9cc4fad54c3627e9afebf905aafde5690ed
("Drop some headers from mm.h") by Avuton Olrich.

Cc: Avuton Olrich <avuton@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 18 Oct 2007 21:40:30 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (51 commits)
  [IPV6]: Fix again the fl6_sock_lookup() fixed locking
  [NETFILTER]: nf_conntrack_tcp: fix connection reopening fix
  [IPV6]: Fix race in ipv6_flowlabel_opt() when inserting two labels
  [IPV6]: Lost locking in fl6_sock_lookup
  [IPV6]: Lost locking when inserting a flowlabel in ipv6_fl_list
  [NETFILTER]: xt_sctp: fix mistake to pass a pointer where array is required
  [NET]: Fix OOPS due to missing check in dev_parse_header().
  [TCP]: Remove lost_retrans zero seqno special cases
  [NET]: fix carrier-on bug?
  [NET]: Fix uninitialised variable in ip_frag_reasm()
  [IPSEC]: Rename mode to outer_mode and add inner_mode
  [IPSEC]: Disallow combinations of RO and AH/ESP/IPCOMP
  [IPSEC]: Use the top IPv4 route's peer instead of the bottom
  [IPSEC]: Store afinfo pointer in xfrm_mode
  [IPSEC]: Add missing BEET checks
  [IPSEC]: Move type and mode map into xfrm_state.c
  [IPSEC]: Fix length check in xfrm_parse_spi
  [IPSEC]: Move ip_summed zapping out of xfrm6_rcv_spi
  [IPSEC]: Get nexthdr from caller in xfrm6_rcv_spi
  [IPSEC]: Move tunnel parsing for IPv4 out of xfrm4_input
  ...

11 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Thu, 18 Oct 2007 21:39:44 +0000]
Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC/64]: Consolidate of_register_driver
  [SPARC] Videopix Frame Grabber: Convert device_lock_sem to mutex
  [SPARC]: Support for new termios.
  [SPARC64]: Check of_get_property() return in pci_determine_mem_io_space().
  [SPARC64]: Fix boot failures due to bootmem.
  [SPARC64]: Implement atomic backoff.

11 years agoI/OAT: Add completion callback for async_tx interface use
Shannon Nelson [Thu, 18 Oct 2007 10:07:15 +0000]
I/OAT: Add completion callback for async_tx interface use

The async_tx interface includes a completion callback.  This adds support
for using that callback, including using interrupts on completion.

[akpm@linux-foundation.org: various fixes]
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoI/OAT: Tighten descriptor setup performance
Shannon Nelson [Thu, 18 Oct 2007 10:07:14 +0000]
I/OAT: Tighten descriptor setup performance

The change to the async_tx interface cost this driver some performance by
spreading the descriptor setup across several functions, including multiple
passes over the new descriptor chain.  Here we bring the work back into one
primary function and only do one pass.

[akpm@linux-foundation.org: cleanups, uninline]
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoI/OAT: clean up error handling and some print messages
Shannon Nelson [Thu, 18 Oct 2007 10:07:13 +0000]
I/OAT: clean up error handling and some print messages

Make better use of dev_err(), and catch an error where the transaction
creation might fail.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoI/OAT: clean up of dca provider start and stop
Shannon Nelson [Thu, 18 Oct 2007 10:07:13 +0000]
I/OAT: clean up of dca provider start and stop

Don't start ioat_dca if ioat_dma didn't start, and then stop ioat_dca
before stopping ioat_dma.  Since the ioat_dma side does the pci device
work, This takes care of ioat_dca trying to use a bad device reference.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoI/OAT: cleanup pci issues
Shannon Nelson [Thu, 18 Oct 2007 10:07:12 +0000]
I/OAT: cleanup pci issues

Reorder the pci release actions
    Letting go of the resources in the right order helps get rid of
    occasional kernel complaints.

Fix the pci_driver object name [Randy Dunlap]
    Rename the struct pci_driver data so that false section mismatch
    warnings won't be produced.

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoIPMI: add 0.9 support
Corey Minyard [Thu, 18 Oct 2007 10:07:11 +0000]
IPMI: add 0.9 support

Add support for IPMI 0.9 systems to the IPMI driver.  Just handle a shorter
get device ID command with less information.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Stian Jordet <liste@jordet.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoIPMI: fix hotmod remove lock
Corey Minyard [Thu, 18 Oct 2007 10:07:11 +0000]
IPMI: fix hotmod remove lock

The removal of proc entries was done holding a lock, which is no longer
allowed.  There is no need for the lock, only a mutex is required, so switch
over to a mutex.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoIPMI: new NMI handling
Corey Minyard [Thu, 18 Oct 2007 10:07:10 +0000]
IPMI: new NMI handling

Convert over to the new NMI handling for getting IPMI watchdog timeouts via an
NMI.  This add config options to know if there is the ability to receive NMIs
and if it has an NMI post processing call.  Then it modifies the IPMI watchdog
to take advantage of this so that it can know if an NMI comes in.

It also adds testing that the IPMI NMI watchdog works.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoIPMI: add polled interface
Corey Minyard [Thu, 18 Oct 2007 10:07:09 +0000]
IPMI: add polled interface

Currently the IPMI watchdog timer sets the watchdog timeout on a panic, but it
doesn't actually poll the interface to make sure the message goes out.

Add an interface for polling the IPMI driver, and add code to the IPMI
watchdog timer to poll the interface when the timer is set from a panic.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoIPMI: documentation fixes
Corey Minyard [Thu, 18 Oct 2007 10:07:09 +0000]
IPMI: documentation fixes

Clean up IPMI documentation to remove references to high-res timers and add
info about the polling thread.  Also fix an doc error for a parameter.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoIPMI: remove bogus semaphore from watchdog
Corey Minyard [Thu, 18 Oct 2007 10:07:08 +0000]
IPMI: remove bogus semaphore from watchdog

Lockdep was giving an error when loading the IPMI watchdog module.  It turns
out that if you try to claim a lock in a parameter handling routine, lockdep
won't see that lock as "static" yet because the module is not yet on the
module list, so it will complain.

However, the semaphore in question is completely unnecessary.  So just remove
it.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoIPMI: don't init irq until ready
Corey Minyard [Thu, 18 Oct 2007 10:07:08 +0000]
IPMI: don't init irq until ready

Patrick found a race at startup.  Interrupts were being enabled for the IPMI
interface before the driver was really ready to handle them.  This could
result in an oops if something was pending on the interface at startup and
interrupt were already enabled (technically shouldn't happen, but need to
cover for this in real life).  So move the IRQ setup to the code that starts
the actual IPMI processing.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Patrick Schoeller <Patrick.Schoeller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoReplace __attribute_pure__ with __pure
Ralf Baechle [Thu, 18 Oct 2007 10:07:07 +0000]
Replace __attribute_pure__ with __pure

To be consistent with the use of attributes in the rest of the kernel
replace all use of __attribute_pure__ with __pure and delete the definition
of __attribute_pure__.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agosparse pointer use of zero as null
Stephen Hemminger [Thu, 18 Oct 2007 10:07:05 +0000]
sparse pointer use of zero as null

Get rid of sparse related warnings from places that use integer as NULL
pointer.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: add blksize field to fuse_attr
Miklos Szeredi [Thu, 18 Oct 2007 10:07:05 +0000]
fuse: add blksize field to fuse_attr

There are cases when the filesystem will be passed the buffer from a single
read or write call, namely:

 1) in 'direct-io' mode (not O_DIRECT), read/write requests don't go
    through the page cache, but go directly to the userspace fs

 2) currently buffered writes are done with single page requests, but
    if Nick's ->perform_write() patch goes it, it will be possible to
    do larger write requests.  But only if the original write() was
    also bigger than a page.

In these cases the filesystem might want to give a hint to the app
about the optimal I/O size.

Allow the userspace filesystem to supply a blksize value to be returned by
stat() and friends.  If the field is zero, it defaults to the old
PAGE_CACHE_SIZE value.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: add support for mandatory locking
Miklos Szeredi [Thu, 18 Oct 2007 10:07:04 +0000]
fuse: add support for mandatory locking

For mandatory locking the userspace filesystem needs to know the lock
ownership for read, write and truncate operations.

This patch adds the necessary fields to the protocol.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: add helper for asynchronous writes
Miklos Szeredi [Thu, 18 Oct 2007 10:07:03 +0000]
fuse: add helper for asynchronous writes

This patch adds a new helper function fuse_write_fill() which makes it
possible to send WRITE requests asynchronously.

A new flag for WRITE requests is also added which indicates that this a write
from the page cache, and not a "normal" file write.

This patch is in preparation for writable mmap support.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: add list of writable files to fuse_inode
Miklos Szeredi [Thu, 18 Oct 2007 10:07:03 +0000]
fuse: add list of writable files to fuse_inode

Each WRITE request must carry a valid file descriptor.  When a page is written
back from a memory mapping, the file through which the page was dirtied is not
available, so a new mechananism is needed to find a suitable file in
->writepage(s).

A list of fuse_files is added to fuse_inode.  The file is removed from the
list in fuse_release().

This patch is in preparation for writable mmap support.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: support BSD locking semantics
Miklos Szeredi [Thu, 18 Oct 2007 10:07:02 +0000]
fuse: support BSD locking semantics

It is trivial to add support for flock(2) semantics to the existing protocol,
by setting the lock owner field to the file pointer, and passing a new
FUSE_LK_FLOCK flag with the locking request.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: add atomic open+truncate support
Miklos Szeredi [Thu, 18 Oct 2007 10:07:02 +0000]
fuse: add atomic open+truncate support

This patch allows fuse filesystems to implement open(..., O_TRUNC) as a single
request, instead of separate truncate and open requests.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: improve utimes support
Miklos Szeredi [Thu, 18 Oct 2007 10:07:01 +0000]
fuse: improve utimes support

Add two new flags for setattr: FATTR_ATIME_NOW and FATTR_MTIME_NOW.  These
mean, that atime or mtime should be changed to the current time.

Also it is now possible to update atime or mtime individually, not just
together.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoVFS: allow filesystems to implement atomic open+truncate
Miklos Szeredi [Thu, 18 Oct 2007 10:07:00 +0000]
VFS: allow filesystems to implement atomic open+truncate

Add a new attribute flag ATTR_OPEN, with the meaning: "truncation was
initiated by open() due to the O_TRUNC flag".

This way filesystems wanting to implement truncation within their ->open()
method can ignore such truncate requests.

This is a quick & dirty hack, but it comes for free.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: clean up open file passing in setattr
Miklos Szeredi [Thu, 18 Oct 2007 10:07:00 +0000]
fuse: clean up open file passing in setattr

Clean up supplying open file to the setattr operation.  In addition to being a
cleanup it prepares for the changes in the way the open file is passed to the
setattr method.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: add file handle to getattr operation
Miklos Szeredi [Thu, 18 Oct 2007 10:06:59 +0000]
fuse: add file handle to getattr operation

Add necessary protocol changes for supplying a file handle with the getattr
operation.  Step the API version to 7.9.

This patch doesn't actually supply the file handle, because that needs some
kind of VFS support, which we haven't yet been able to agree upon.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: fix race between getattr and write
Miklos Szeredi [Thu, 18 Oct 2007 10:06:58 +0000]
fuse: fix race between getattr and write

Getattr and lookup operations can be running in parallel to attribute changing
operations, such as write and setattr.

This means, that if for example getattr was slower than a write, the cached
size attribute could be set to a stale value.

To prevent this race, introduce a per-filesystem attribute version counter.
This counter is incremented whenever cached attributes are modified, and the
incremented value stored in the inode.

Before storing new attributes in the cache, getattr and lookup check, using
the version number, whether the attributes have been modified during the
request's lifetime.  If so, the returned attributes are not cached, because
they might be stale.

Thanks to Jakub Bogusz for the bug report and test program.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Jakub Bogusz <jakub.bogusz@gemius.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: fix allowing operations
Miklos Szeredi [Thu, 18 Oct 2007 10:06:58 +0000]
fuse: fix allowing operations

The following operation didn't check if sending the request was allowed:

  setattr
  listxattr
  statfs

Some other operations don't explicitly do the check, but VFS calls
->permission() which checks this.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoext3: fix setup_new_group_blocks locking
Eric Sandeen [Thu, 18 Oct 2007 10:06:57 +0000]
ext3: fix setup_new_group_blocks locking

setup_new_group_blocks() manipulates the group descriptor block bh under
the block_bitmap bh's lock.  It shouldn't matter since nobody but resize
should be touching these blocks, but it's worth fixing up.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
C: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoext3: support large blocksize up to PAGESIZE
Takashi Sato [Thu, 18 Oct 2007 10:06:56 +0000]
ext3: support large blocksize up to PAGESIZE

This patch set supports large block size(>4k, <=64k) in ext3 just enlarging
the block size limit.  But it is NOT possible to have 64kB blocksize on
ext3 without some changes to the directory handling code.  The reason is
that an empty 64kB directory block would have a rec_len == (__u16)2^16 ==
0, and this would cause an error to be hit in the filesystem.  The proposed
solution is treat 64k rec_len with a an impossible value like rec_len =
0xffff to handle this.

The Patch-set consists of the following 2 patches.
  [1/2]  ext3: enlarge blocksize
         - Allow blocksize up to pagesize

  [2/2]  ext3: fix rec_len overflow
         - prevent rec_len from overflow with 64KB blocksize

Now on 64k page ppc64 box runs with this patch set we could create a 64k
block size ext3, and able to handle empty directory block.

Signed-off-by: Takashi Sato <sho@tnes.nec.co.jp>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofs/cramfs/inode.c: replace hardcoded value with preprocessor constant
Andi Drebes [Thu, 18 Oct 2007 10:06:55 +0000]
fs/cramfs/inode.c: replace hardcoded value with preprocessor constant

Remove the hardcoded value 256 in fs/cramfs/inode.c and replaces it with
CRAMFS_MAXPATHLEN.

Tested on an i386 box.
Signed-off-by: Andi Drebes <lists-receive@programmierforen.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofs/cramfs/inode.c: remove unused variable
Andi Drebes [Thu, 18 Oct 2007 10:06:54 +0000]
fs/cramfs/inode.c: remove unused variable

Remove a variable that is never read.

Signed-off-by: Andi Drebes <lists-receive@programmierforen.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agobit_spin_lock: use lock bitops
Nick Piggin [Thu, 18 Oct 2007 10:06:54 +0000]
bit_spin_lock: use lock bitops

Convert bit_spin_lock to new locking bitops.  Slub can use the non-atomic
store version to clear (Christoph?)

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agopowerpc: lock bitops
Nick Piggin [Thu, 18 Oct 2007 10:06:53 +0000]
powerpc: lock bitops

Add non-trivial lock bitops implementation for powerpc.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomips: lock bitops
Nick Piggin [Thu, 18 Oct 2007 10:06:53 +0000]
mips: lock bitops

mips can avoid one mb when acquiring a lock with test_and_set_bit_lock.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomips: fix bitops
Nick Piggin [Thu, 18 Oct 2007 10:06:52 +0000]
mips: fix bitops

Documentation/atomic_ops.txt defines these primitives must contain a memory
barrier both before and after their memory operation.  This is consistent with
the atomic ops implementation on mips.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoia64: lock bitops
Nick Piggin [Thu, 18 Oct 2007 10:06:52 +0000]
ia64: lock bitops

Convert ia64 to new bitops.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoalpha: lock bitops
Nick Piggin [Thu, 18 Oct 2007 10:06:51 +0000]
alpha: lock bitops

Alpha can avoid one mb when acquiring a lock with test_and_set_bit_lock.

[bunk@kernel.org: alpha bitops.h must #include <asm/barrier.h>]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoalpha: fix bitops
Nick Piggin [Thu, 18 Oct 2007 10:06:50 +0000]
alpha: fix bitops

Documentation/atomic_ops.txt defines these primitives must contain a memory
barrier both before and after their memory operation.  This is consistent with
the atomic ops implementation on alpha.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agobitops: introduce lock ops
Nick Piggin [Thu, 18 Oct 2007 10:06:39 +0000]
bitops: introduce lock ops

Introduce test_and_set_bit_lock / clear_bit_unlock bitops with lock semantics.
Convert all architectures to use the generic implementation.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-By: David Howells <dhowells@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Andi Kleen <ak@muc.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agox86 msr driver: Misc cpuinit annotations
Satyam Sharma [Thu, 18 Oct 2007 10:06:38 +0000]
x86 msr driver: Misc cpuinit annotations

msr_class_cpu_callback() can be marked __cpuinit, being the notifier callback
for a __cpuinitdata notifier_block.  So can be marked msr_device_create() too,
called only from the newly-__cpuinit msr_class_cpu_callback() or from
__init-marked msr_init().

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoRedefine {un}register_hotcpu_notifier() !HOTPLUG_CPU stubs
Satyam Sharma [Thu, 18 Oct 2007 10:06:38 +0000]
Redefine {un}register_hotcpu_notifier() !HOTPLUG_CPU stubs

The return of the present "do {} while" based stub definition of
register_hotcpu_notifier() cannot be checked.  This makes the stub
asymmetric w.r.t.  the real HOTPLUG_CPU=y implementation that is
int-returning.  So let us redefine this to be consistent with the full
version.  Also do the same for unregister_hotcpu_notifier().

We cannot define these as static inline functions due to an existing GCC
bug (#33172).  So define as macros that return appropriately instead (int
'0' for the register_hotcpu_notifier case and void for
unregister_hotcpu_notifier).

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agopowerpc: add scaled time accounting
Michael Neuling [Thu, 18 Oct 2007 10:06:37 +0000]
powerpc: add scaled time accounting

This adds POWERPC specific hooks for scaled time accounting.

POWER6 includes a SPURR register.  The SPURR is based off the PURR register
but is scaled based on CPU frequency and issue rates.  This gives a more
accurate account of the instructions used per task.  The PURR and timebase
will be constant relative to the wall clock, irrespective of the CPU
frequency.

This implementation reads the SPURR register in account_system_vtime which
is only call called on context witch and hard and soft irq entry and exit.
The percentage of user and system time is then estimated using the ratio of
these accounted by the PURR.  If the SPURR is not present, the PURR read.

An earlier implementation of this patch read the SPURR whenever the PURR
was read, which included the system call entry and exit path.
Unfortunately this showed a performance regression on lmbench runs, so was
re-implemented.

I've included the lmbench results here when run bare metal on POWER6.  1st
column is the unpatch results.  2nd column is the results using the below
patch and the 3rd is the % diff of these results from the base.  4th and
5th columns are the results and % differnce from the base using the older
patch (SPURR read in syscall entry/exit path).

                              Base        Scaled-Acct     SPURR-in-syscall
                             Result      Result  % diff    Result % diff
Simple syscall:              0.3086      0.3086  0.0000    0.3452 11.8600
Simple read:                 0.4591      0.4671  1.7425    0.5044 9.86713
Simple write:                0.4364      0.4366  0.0458    0.4731 8.40971
Simple stat:                 2.0055      2.0295  1.1967    2.0669 3.06158
Simple fstat:                0.5962      0.5876  -1.442    0.6368 6.80979
Simple open/close:           3.1283      3.1009  -0.875    3.2088 2.57328
Select on 10 fd's:           0.8554      0.8457  -1.133    0.8667 1.32101
Select on 100 fd's:          3.5292      3.6329  2.9383    3.6664 3.88756
Select on 250 fd's:          7.9097      8.1881  3.5197    8.2242 3.97613
Select on 500 fd's:          15.2659     15.836  3.7357    15.873 3.97814
Select on 10 tcp fd's:       0.9576      0.9416  -1.670    0.9752 1.83792
Select on 100 tcp fd's:      7.248       7.2254  -0.311    7.2685 0.28283
Select on 250 tcp fd's:      17.7742     17.707  -0.375    17.749 -0.1406
Select on 500 tcp fd's:      35.4258     35.25   -0.496    35.286 -0.3929
Signal handler installation: 0.6131      0.6075  -0.913    0.647  5.52927
Signal handler overhead:     2.0919      2.1078  0.7600    2.1831 4.35967
Protection fault:            0.7345      0.7478  1.8107    0.8031 9.33968
Pipe latency:                33.006      16.398  -50.31    33.475 1.42368
AF_UNIX sock stream latency: 14.5093     30.910  113.03    30.715 111.692
Process fork+exit:           219.8       222.8   1.3648    229.37 4.35623
Process fork+execve:         876.14      873.28  -0.32     868.66 -0.8533
Process fork+/bin/sh -c:     2830        2876.5  1.6431    2958   4.52296
File /var/tmp/XXX write bw:  1193497     1195536 0.1708    118657 -0.5799
Pagefaults on /var/tmp/XXX:  3.1272      3.2117  2.7020    3.2521 3.99398

Also, kernel compile times show no difference with this patch applied.

[pbadari@us.ibm.com: Avoid unnecessary PURR reading]
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoadd-scaled-time-to-taskstats-based-process-accounting fix
Michael Neuling [Thu, 18 Oct 2007 10:06:35 +0000]
add-scaled-time-to-taskstats-based-process-accounting fix

This moves the new items to the end of the taskstats struct as
requested by Balbir and yourself.

Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoAdd scaled time to taskstats based process accounting
Michael Neuling [Thu, 18 Oct 2007 10:06:34 +0000]
Add scaled time to taskstats based process accounting

This adds items to the taststats struct to account for user and system
time based on scaling the CPU frequency and instruction issue rates.

Adds account_(user|system)_time_scaled callbacks which architectures
can use to account for time using this mechanism.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoAdd missing newlines to some uses of dev_<level> messages
Joe Perches [Thu, 18 Oct 2007 10:06:30 +0000]
Add missing newlines to some uses of dev_<level> messages

Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoChar: rocket, fix signed/unsigned warning
Jiri Slaby [Thu, 18 Oct 2007 10:06:29 +0000]
Char: rocket, fix signed/unsigned warning

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>