8 years ago[SCSI] bnx2fc: Do not arm CQ when there are no CQEs
Bhanu Prakash Gollapudi [Wed, 27 Jul 2011 18:32:11 +0000]
[SCSI] bnx2fc: Do not arm CQ when there are no CQEs

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: hold tgt lock when calling cmd_release
Bhanu Prakash Gollapudi [Wed, 27 Jul 2011 18:32:10 +0000]
[SCSI] bnx2fc: hold tgt lock when calling cmd_release

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: Enable support for sequence level error recovery
Bhanu Prakash Gollapudi [Wed, 27 Jul 2011 18:32:09 +0000]
[SCSI] bnx2fc: Enable support for sequence level error recovery

Driver advertises its support for 'retry' bit and 'conf completion' bit in PRLI
params to enable support for 'sequence level error recovery'

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: HSI changes for tape
Bhanu Prakash Gollapudi [Wed, 27 Jul 2011 18:32:08 +0000]
[SCSI] bnx2fc: HSI changes for tape

Program the firmware task structure with init_flags indicating the device is
'sequence level error recovery' capable.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: Handle REC_TOV error code from firmware
Bhanu Prakash Gollapudi [Wed, 27 Jul 2011 18:32:07 +0000]
[SCSI] bnx2fc: Handle REC_TOV error code from firmware

Driver decides to initiate REC on REC_TOV timer pop. The firmware maintains the
REC timer and informs the driver as a firmware error message, which is an
unsolicited event to the driver. Driver also issues REC on other unsolicited
events from firmware that indicate data loss.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: REC/SRR link service request and response handling
Bhanu Prakash Gollapudi [Wed, 27 Jul 2011 18:32:06 +0000]
[SCSI] bnx2fc: REC/SRR link service request and response handling

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: Support 'sequence cleanup' task
Bhanu Prakash Gollapudi [Wed, 27 Jul 2011 18:32:05 +0000]
[SCSI] bnx2fc: Support 'sequence cleanup' task

For the devices that support sequence level error recovery, based on the REC
response, the firmware has to be informed about the offset from which the
retransmission should happen. Driver initiates sequence cleanup task to
firmware so that the firmware can program the task. Upon the sequence cleanup
completion, SRR is issued to retransmit the sequence.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support partitions...
Chandra Seetharaman [Wed, 27 Jul 2011 18:22:56 +0000]
[SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support partitions in storage

rdac hardware handler assumes that there is one-to-one relation ship
between the host and the controller w.r.t lun.  IOW, it does not
support "multiple storage partitions" within a storage.

Example:
HBA1 and HBA2 see lun 0 and 1 in storage A (1)
HBA3 and HBA4 see lun 0 and 1 in storage A (2)
HBA5 and HBA6 see lun 0 and 1 in storage A (3)

luns 0 and 1 in (1), (2) and (3) are totally different.

But, rdac handler treats the lun 0s (and lun 1s) as the same when
sending a mode select to the controller, which is wrong.

This patch makes the rdac hardware handler associate HBA and the
storage w.r.t lun (and not the host itself).

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] ipr: reorder error handling code to include iounmap
Julia Lawall [Mon, 11 Jul 2011 21:08:25 +0000]
[SCSI] ipr: reorder error handling code to include iounmap

The out_msi_disable label should be before cleanup_nomem to additionally
benefit from the call to iounmap.  Subsequent gotos are adjusted to go to
out_msi_disable instead of cleanup_nomem, which now follows it.  This is
safe because pci_disable_msi does nothing if pci_enable_msi was not called.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression e1,e2;
statement S;
@@

e1 = pci_ioremap_bar(...);
... when != e1 = e2
    when != iounmap(e1)
    when any
(
 if (<+...e1...+>) S
|
 if(...) { ... return 0; }
|
 if (...) { ... when != iounmap(e1)
                when != if (...) { ... iounmap(e1) ... }
* return ...;
 } else S
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] pmcraid: reject negative request size
Dan Rosenberg [Mon, 11 Jul 2011 21:08:23 +0000]
[SCSI] pmcraid: reject negative request size

There's a code path in pmcraid that can be reached via device ioctl that
causes all sorts of ugliness, including heap corruption or triggering the
OOM killer due to consecutive allocation of large numbers of pages.

First, the user can call pmcraid_chr_ioctl(), with a type
PMCRAID_PASSTHROUGH_IOCTL.  This calls through to
pmcraid_ioctl_passthrough().  Next, a pmcraid_passthrough_ioctl_buffer
is copied in, and the request_size variable is set to
buffer->ioarcb.data_transfer_length, which is an arbitrary 32-bit
signed value provided by the user.  If a negative value is provided
here, bad things can happen.  For example,
pmcraid_build_passthrough_ioadls() is called with this request_size,
which immediately calls pmcraid_alloc_sglist() with a negative size.
The resulting math on allocating a scatter list can result in an
overflow in the kzalloc() call (if num_elem is 0, the sglist will be
smaller than expected), or if num_elem is unexpectedly large the
subsequent loop will call alloc_pages() repeatedly, a high number of
pages will be allocated and the OOM killer might be invoked.

It looks like preventing this value from being negative in
pmcraid_ioctl_passthrough() would be sufficient.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] libsas: remove expander from dev list on error
Luben Tuikov [Wed, 27 Jul 2011 06:10:48 +0000]
[SCSI] libsas: remove expander from dev list on error

If expander discovery fails (sas_discover_expander()), remove the
expander from the port device list (sas_ex_discover_expander()),
before freeing it. Else the list is corrupted and, e.g., when we
attempt to send SMP commands to other devices, the kernel oopses.

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Cc: stable@kernel.org
Reviewed-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] megaraid_sas Version to 5.40-rc1 and Changelog update
adam radford [Tue, 26 Jul 2011 22:43:01 +0000]
[SCSI] megaraid_sas Version to 5.40-rc1 and Changelog update

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] megaraid_sas: Add .change_queue_depth support
adam radford [Tue, 26 Jul 2011 22:42:52 +0000]
[SCSI] megaraid_sas: Add .change_queue_depth support

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] megaraid_sas: Fix FastPath I/O to work on degraded raid 1
adam radford [Tue, 26 Jul 2011 23:16:40 +0000]
[SCSI] megaraid_sas: Fix FastPath I/O to work on degraded raid 1

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: Enable REC & CONF support for the session
Bhanu Prakash Gollapudi [Tue, 26 Jul 2011 21:51:40 +0000]
[SCSI] bnx2fc: Enable REC & CONF support for the session

Based on PRLI response, identify if the target is FCP-2 (seq level error
recovery) capable, and appropriately set the corresponding CONF, REC flags when
offloading the session.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: Introduce interface structure for each vlan interface
Bhanu Prakash Gollapudi [Tue, 26 Jul 2011 21:51:39 +0000]
[SCSI] bnx2fc: Introduce interface structure for each vlan interface

Currently, bnx2fc has a hba structure that can work with only a single vlan
interface.  When there is a change in vlan id, it does not have the capability
to switch to different vlan interface. To solve this problem, a new structure
called 'interface' has been introduced, and each hba can now have multiple
interfaces, one per vlan id.

Most of the patch is a moving the interface specific fields from hba to the
interface structure, and appropriately modifying the dereferences. A list of
interfaces (if_list) is maintained along with adapter list. During a create
call, the interface structure is allocated and added to if_list and deleted &
freed on a destroy call.  Link events are propagated to all interfaces
belonging to the hba.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] hpsa: retry commands completing with status of UNSOLICITED_ABORT
Stephen M. Cameron [Tue, 26 Jul 2011 16:08:52 +0000]
[SCSI] hpsa: retry commands completing with status of UNSOLICITED_ABORT

In a shared SAS setup, target devices may be reset by one of
several hosts, and outstanding commands on that device will be
completed to corresponding hosts with status of UNSOLICITED_ABORT.
Such commands should be retried instead of being treated as i/o
errors.  Also fixed a nearby spelling error.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] hpsa: do not attempt to read from a write-only register
Stephen M. Cameron [Thu, 21 Jul 2011 18:16:05 +0000]
[SCSI] hpsa: do not attempt to read from a write-only register

Most smartarrays tolerate it, but a few new ones don't.
Without this change some newer Smart Arrays will lock up
and i/o will grind to a halt.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] lpfc 8.3.25: Change driver version to 8.3.25
James Smart [Fri, 22 Jul 2011 22:38:16 +0000]
[SCSI] lpfc 8.3.25: Change driver version to 8.3.25

Change driver version to 8.3.25

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] lpfc 8.3.25: Add FCF priority failover functionality
James Smart [Fri, 22 Jul 2011 22:37:52 +0000]
[SCSI] lpfc 8.3.25: Add FCF priority failover functionality

This patch implements a new FCF failover policy for the lpfc driver. It
allows the driver to choose which FCF to failover to based on the FCF
priority. This patch also introduces a new sysfs parameter
(fcf_failover_policy) to allow the user to choose which FCF failover policy
to use.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] lpfc 8.3.25: Enhancements to Debug infrastructure
James Smart [Fri, 22 Jul 2011 22:37:42 +0000]
[SCSI] lpfc 8.3.25: Enhancements to Debug infrastructure

Enhancements to Debug infrastructure

- debugfs additions for new hardware.
- Correct stack overflow in lpfc_debugfs_dumpHBASlim_data()
- Correct warning on uninitialized reg_val in lpfc_idiag_drbacc_write()
- Separated the iDiag command for capturing mailbox commands for generic
  issue mailbox command entry point and for BSG multi-buffer handling.
- Added capturing dumping capabiliy of mailbox command and external buffer
  for the completion of the mailbox command so that the outcome can be
  examined.
- Changed all the iDiag command structure data array indexing introduced so
  far with properly defined macros.
- Added SLI4 device PCI BAR memory mapped register read/browse, write-by-
  value, set-bit, and clear-bit methods for both interface type 0 and
  interface type 2.
- Corrected warnings on mbxstatus being uninitialized in error paths in
  lpfc_bsg.c

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] lpfc 8.3.25: PCI and SR-IOV Fixes
James Smart [Fri, 22 Jul 2011 22:37:28 +0000]
[SCSI] lpfc 8.3.25: PCI and SR-IOV Fixes

PCI and SR-IOV Fixes

- Call pci_save_state after the pci_restore_state completes.
- After calling pci_enable_pcie_error_reporting() and checking the return
  value for logging messages from rc, reset rc to 0 to it will not later be
  interpreted for error.
- Read PCI config space SR-IOV capability to get the number of VFs supported.
- Check for the PF's supported number of VFs before invoking PCI enable sriov
  API call and log error message that user requested number of VFs is beyond
  the PF capability if such request is passed in.
- Added check for Physical function with Virtual Functions attached. If so,
  first disable all the VFs before proceeding to device reset.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] lpfc 8.3.25: Fabric and Target Discovery Fixes
James Smart [Fri, 22 Jul 2011 22:37:06 +0000]
[SCSI] lpfc 8.3.25: Fabric and Target Discovery Fixes

Fabric and Target Discovery Fixes

- Clear FC_VPORT_NEEDS_INIT_VPI flag during completion of REG_VFI mailbox
  command.
- Prevent SLI3 Code from unregistering the physical VPI.
- Add an else clause to the code that checks and sets
  sp->cmn.request_multiple_Nport to clear the bit.
- Remove a redundant mbox free.
- Modified lpfc_sli4_async_fip_evt to pass in physical VPI toi
  lpfc_find_vport_by_vpid function.
- Modified lpfc_find_vport_by_vpid to translate physical VPI to logical VPI
  before comparing with vport VPI.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] lpfc 8.3.25: Adapter Interface fixes and changes
James Smart [Fri, 22 Jul 2011 22:36:52 +0000]
[SCSI] lpfc 8.3.25: Adapter Interface fixes and changes

Adapter Interface fixes and changes

- Modify the macro field from lpfc_init_vpi_vpi to lpfc_init_vfi_vpi
- Add the new CQE_CODE_RECEIVE_V1 CQE Code, add code in the driver to handle
  the new Code the same as the CQE_CODE_RECEIVE code except that there are
  two new checks for this code that will cause the driver to use the new V1
  macros for rq_id and fcf_id.
- Fix a bug in lpfc_prep_seq() where the size out of the first CQE was
  ONLY being used, even though multiple dmabufs make up the sequence,
  each have their own CQE with potentially different sizes.
- Fix bug in lpfc_bsg_ct_unsol_event() where the ulpContext and ulpWord[3]
  fields of the XMIT_SEQUENCE64_CX IOCB were being calculated incorrectly.
- Do physical to logical translation before indexing into the active
  XRI array.
- Populate physical vpi in the iocb data structure.
- Put the current accumulated total in each IOCB in the chain as we are
  walking thru then. The last IOCB in the chain should have the total
  length of the sequence.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] lpfc 8.3.25: Miscellaneous Bug fixes and code cleanup
James Smart [Fri, 22 Jul 2011 22:36:33 +0000]
[SCSI] lpfc 8.3.25: Miscellaneous Bug fixes and code cleanup

Miscellaneous Bug fixes and code cleanup

- Fix 16G link speed reporting by adding check for 16G check.
- Change the check and enforcement of MAILBOX_EXT_SIZE (2048B)
  to the check and enforcement of BSG_MBOX_SIZE - sizeof(MAILBOX_t) (3840B).
- Instead of waiting for a fixed amount of time after performing firmware
  reset, the driver shall wait for the Lancer SLIPORT_STATUS register for the
  readiness of the firmware for bring up.
- Add logging to indicate when dynamic parameters are changed.
- Add revision and date to the firmware image format.
- Use revision instead of rev_name to check firmware image version.
- Update temporary offset after memcopy is complete for firmware update.
- Consolidated the use of the macros to get rid of duplicated register
  offset definitions.
- Removed the unused second parameter in routine lpfc_bsg_diag_mode_enter()
- Enable debugfs when debugfs is enabled.
- Update function comments for lpfc_sli4_alloc_xri and lpfc_sli4_init_rpi_hdrs.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] lpfc 8.3.25: T10 DIF Fixes
James Smart [Fri, 22 Jul 2011 22:36:25 +0000]
[SCSI] lpfc 8.3.25: T10 DIF Fixes

T10 DIF Fixes

- Fix the case where the SCSI Host supplies the CRC and driver to controller
  protection is on.
- Only support T10 DIF type 1. LBA always goes in ref tag and app tag is not
  checked.
- Change the format of the sense data passed up to the SCSI layer to match the
  Descriptor Format Sense Data found in SPC-4 sections 4.5.2.1 and 4.5.2.2.
- Fix Slip PDE implementation.
- Remove BUG() in else casein lpfc_sc_to_bg_opcodes.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Update the driver version to 3.0.2.2
Krishna Gudipati [Thu, 21 Jul 2011 00:04:44 +0000]
[SCSI] bfa: Update the driver version to 3.0.2.2

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Added support to configure lunmasking
Krishna Gudipati [Thu, 21 Jul 2011 00:04:24 +0000]
[SCSI] bfa: Added support to configure lunmasking

- Added support to enable / disable lunmasking on Brocade adapter ports.
- Added support to query / clear lunmasking configuration.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Introduced initiator based lun masking feature.
Krishna Gudipati [Thu, 21 Jul 2011 00:04:03 +0000]
[SCSI] bfa: Introduced initiator based lun masking feature.

- Added support to enable initiator based lun masking.
- Initiator based Lun masking works similar to zoning where
  initiator port is allowed to see only those LUNs which are
  configured to be seen.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Add support to store driver configuration in flash.
Krishna Gudipati [Thu, 21 Jul 2011 00:03:46 +0000]
[SCSI] bfa: Add support to store driver configuration in flash.

- Added dconf (Driver Config) BFA sub-module.
- The dconf sub-module provides interfaces and manages flash writes
  to the flash DRV parition.
- dconf sub-module also ensures that the whole 64K DRV partition is updated
  on a flash write.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Add support to collect / reset fabric stats.
Krishna Gudipati [Thu, 21 Jul 2011 00:03:27 +0000]
[SCSI] bfa: Add support to collect / reset fabric stats.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Added support to configure QOS and collect stats.
Krishna Gudipati [Thu, 21 Jul 2011 00:03:09 +0000]
[SCSI] bfa: Added support to configure QOS and collect stats.

- Added support to configure QOS on Brocade adapter ports.
- Added support to collect / reset QOS statistics.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Add support to configure trunking on Brocade adapter ports.
Krishna Gudipati [Thu, 21 Jul 2011 00:02:50 +0000]
[SCSI] bfa: Add support to configure trunking on Brocade adapter ports.

- Added logic to enable / disable trunking on Brocade adapter ports.
- Added logic to query trunking info.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Add support to configure and query flash boot partition
Krishna Gudipati [Thu, 21 Jul 2011 00:02:32 +0000]
[SCSI] bfa: Add support to configure and query flash boot partition

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Added support to collect and reset fcport stats
Krishna Gudipati [Thu, 21 Jul 2011 00:02:11 +0000]
[SCSI] bfa: Added support to collect and reset fcport stats

- Added support to collect and reset fcport stats.
- Modified design to allow multiple requests for fcport stats.
  - fcport will remember the stats request in its stats_pending
    queue and service each of the queued requests after receiving
    a firmware response for the prior request.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Add support for IO profiling.
Krishna Gudipati [Thu, 21 Jul 2011 00:01:52 +0000]
[SCSI] bfa: Add support for IO profiling.

- Made changes to support IO profiling.
- Added support to configure and query IO profiling info.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Extend BSG to support more user commands
Krishna Gudipati [Thu, 21 Jul 2011 00:01:34 +0000]
[SCSI] bfa: Extend BSG to support more user commands

Extended BSG to support stats, port log and trace reset and to support
adapter, port SET operations.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Check supported speed based on port mode
Krishna Gudipati [Thu, 21 Jul 2011 00:01:07 +0000]
[SCSI] bfa: Check supported speed based on port mode

Added logic to check the loopback test input speed based on port mode.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Update RME interrupt handling.
Krishna Gudipati [Thu, 21 Jul 2011 00:00:45 +0000]
[SCSI] bfa: Update RME interrupt handling.

- Made changes to always acknowledge RME interrupt and update
  consumer index (CI) when RME interrupt is generated.
- Made changes to have ASIC specific hw_rspq_ack() handler.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: use negative error return values in all functions
Krishna Gudipati [Wed, 20 Jul 2011 23:59:44 +0000]
[SCSI] bfa: use negative error return values in all functions

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bfa: Add FC-transport based Asynchronous Event Notification support.
Krishna Gudipati [Wed, 20 Jul 2011 23:59:13 +0000]
[SCSI] bfa: Add FC-transport based Asynchronous Event Notification support.

- Added support to post vendor unique events on fc_host.
- Supports adapter, port, ioc, flash and remote port based AEN events.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] dh_rdac: Use WWID from C8 page instead of Subsystem id from C4 page to identif...
Chandra Seetharaman [Wed, 20 Jul 2011 21:18:56 +0000]
[SCSI] dh_rdac: Use WWID from C8 page instead of Subsystem id from C4 page to identify storage

rdac hardware handler uses "Subsystem Identifier" from C4 inquiry page
to uniquely identify a storage. The problem with that is that if any
any of the bytes are non-ascii, subsys_id will all be spaces (hex
0x20). This creates lot of problems especially when there are multiple
rdac storages are connected to the server.

Use "Storage Array Unique Identifier" from C8 inquiry page, which is the
world wide unique identifier for the storage array, to uniquely identify
the storage.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mptfusion : Added check for SILI bit in READ_6 CDB for DATA UNDERRUN ERRATA
Kashyap, Desai [Wed, 20 Jul 2011 15:58:03 +0000]
[SCSI] mptfusion : Added check for SILI bit in READ_6 CDB for DATA UNDERRUN ERRATA

When READ_6 command is issued, the setting of SILI Bit in CDB is confirmed and
if SILI bit is off, the processing of relavent Errata is executed.

Earlier we did not have check for SILI bit in READ_6 CDB.
As described in "ssc-r22", Now Driver is checking SILI bit for READ_6.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] qla2xxx: Cleanup of previous infrastructure.
Saurav Kashyap [Thu, 14 Jul 2011 19:00:14 +0000]
[SCSI] qla2xxx: Cleanup of previous infrastructure.

Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] qla2xxx: Code changes to support new dynamic logging infrastructure.
Saurav Kashyap [Thu, 14 Jul 2011 19:00:13 +0000]
[SCSI] qla2xxx: Code changes to support new dynamic logging infrastructure.

The code is changed to support the new dynamic logging infrastructure.
Following are the levels added.
Default is 0 - no logging.  0x40000000 - Module Init & Probe.
0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.
0x08000000 - IO tracing.    0x04000000 - DPC Thread.
0x02000000 - Async events.  0x01000000 - Timer routines.
0x00800000 - User space.    0x00400000 - Task Management.
0x00200000 - AER/EEH.       0x00100000 - Multi Q.
0x00080000 - P3P Specific.  0x00040000 - Virtual Port.
0x00020000 - Buffer Dump.   0x00010000 - Misc.
0x7fffffff - For enabling all logs, can be too many logs.

Setting ql2xextended_error_logging module parameter to any of the above
value, will enable the debug for that particular level.
Do LOGICAL OR of the value to enable more than one level.

Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] qla2xxx: Basic infrastructure for dynamic logging.
Saurav Kashyap [Thu, 14 Jul 2011 19:00:12 +0000]
[SCSI] qla2xxx: Basic infrastructure for dynamic logging.

This patch adds the dynamic logging framework to the qla2xxx driver.
The user will be able to change the logging levels on the fly i.e.
without load/unload of the driver. This also enables logging to be
enabled for a particular section of the driver such as initialization,
device discovery etc.

Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] scsi_lib: pause between error retries
James Smart [Wed, 6 Jul 2011 16:45:17 +0000]
[SCSI] scsi_lib: pause between error retries

During cable pull tests on our 16G FC adapter, we are seeing errors,
typically reads to close targets, which fail due to CRC or framing
errors caused by the cable being pull (return status DID_ERROR).
The adapter detects the error on one of the first frames received,
marks the FC exchange as dead (further frames go to bit bucket) and
signals the host of the error. This action is so quick, and coupled
with fast host CPUs, creates a scenario in which the midlayer sees
the failure and retries the io almost immediately. We've seen link
traces with the retry on the link while the original i/o is still
being processed by the target. We're also seeing the time window
for the "link to pull-apart" and the physical interface to report
disconnected to be in the few millisecond range. Which means, we're
encountering scenarios where the full retry count is exhausted
(all with error) by the midlayer before the link disconnect state
is detected.

We looked at 8G FC behavior and occasionally see the same behavior,
but as the link was slower, it rarely could exhaust all retries
before the link reported disconnect.

What is needed is a slight delay between io retries due to DID_ERROR
to cover this error.  It is inappropriate to put this delay in the
driver, as the error is indistinguishable from other link-related errors,
nor does the driver track whether the io is a retry or not. This is also
easier than tracking between-io-error bursts that are seen in this
scenario.

The patch below updates the retry path so that it inserts a delay as
if the target was busy.  The busy delay is on the order of 6ms. This
delay is sufficient to ensure the link down condition is reported
before the retry count is exhausted (at most 1 retry is seen).

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mpt2sas: WarpDrive Infinite command retries due to wrong scsi command entry...
Kashyap, Desai [Tue, 5 Jul 2011 07:10:23 +0000]
[SCSI] mpt2sas: WarpDrive Infinite command retries due to wrong scsi command entry in MPI message

Issue:

This issue is seen on LSI H/W WarpDrive SSS6200 When filed direct I/O
is tried as volume I/O the scmd field in internal lookup table get
cleared and because of that the retried volume I/O never gets reported
as completed to SML.

Result:

I/O timeout and Error handling thread will kicking off

Fix:

Setting back the scmd in the lookup table before retrying the failed
direct i/o

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] bnx2fc: Replace printks with KERN_ALERT to KERN_ERR/KERN_INFO
Bhanu Prakash Gollapudi [Tue, 28 Jun 2011 06:30:53 +0000]
[SCSI] bnx2fc: Replace printks with KERN_ALERT to KERN_ERR/KERN_INFO

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] scsi_transport_spi: Export host width and HBA id
Hannes Reinecke [Wed, 29 Jun 2011 20:49:57 +0000]
[SCSI] scsi_transport_spi: Export host width and HBA id

Currently it's impossible to find out if the host supports
wide SCSI unless you're committed to trawl through syslog.
And it's near impossible to find the actual HBA id, which
is settable for some SCSI HBAs (like aic7xxx).
So export them via sysfs.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ankit Jain <jankit@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: Add support for interrupt tasklet
Xiangliang Yu [Thu, 30 Jun 2011 14:27:36 +0000]
[SCSI] mvsas: Add support for interrupt tasklet

Add support for interrupt tasklet, which will improve performance.
Correct spelling of "20011"

[jejb: simplified ifdefs and fixed unused variable problem]
Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: update comments
Xiangliang Yu [Tue, 24 May 2011 14:38:10 +0000]
[SCSI] mvsas: update comments

Remove obsolete comments and add new comments

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: misc improvements
Xiangliang Yu [Tue, 24 May 2011 14:37:25 +0000]
[SCSI] mvsas: misc improvements

Change code to match HBA datasheet.
Change code to make it readable.
Add support big endian for mvs_prd_imt.
Add cpu_to_le32 and cpu_to_le64 to use on addr.
Add scan_finished for structure mvs_prv_info.

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: Add new macros and functions
Xiangliang Yu [Tue, 24 May 2011 14:36:02 +0000]
[SCSI] mvsas: Add new macros and functions

Add new macros: MVS_SOFT_RESET, MVS_HARD_RESET, MVS_PHY_TUNE,
MVS_COMMAND_ACTIVE, EXP_BRCT_CHG, MVS_MAX_SG
Add new member sg_width in struct mvs_chip_info
Use macros rather than magic number
Add new functions: mvs_fill_ssp_resp_iu, mvs_set_sense,
mvs_94xx_clear_srs_irq, mvs_94xx_phy_set_link_rate

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: Remove unused macros, variables and functions
Xiangliang Yu [Tue, 24 May 2011 14:35:09 +0000]
[SCSI] mvsas: Remove unused macros, variables and functions

Remove unused macros: VSR_PHY_VS0, VSR_PHY_VS1, MVS_SLOTS,
MVS_CAN_QUEUE, MVS_MSI, SG_MX, _MV_DUMP, MV_DISABLE_NCQ
Remove unused variables for mvs_info: irq, exp_req, cmd_size
Remove unused functions: mvs_get_sas_addr, mvs_hexdump,
mvs_hba_sb_dump, mvs_hab_memory_dump, mvs_hba_cq_dump

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: fix 94xx hotplug issue
Xiangliang Yu [Tue, 24 May 2011 14:33:11 +0000]
[SCSI] mvsas: fix 94xx hotplug issue

Fix 94xx A0/B0 revision hotplug issue.
Remove unused macro: DISABLE_HOTPLUG_DMA_FIX

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: Add driver version and interrupt coalescing to device attributes in...
Xiangliang Yu [Tue, 24 May 2011 14:31:47 +0000]
[SCSI] mvsas: Add driver version and interrupt coalescing to device attributes in sysfs

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: add support for 94xx phy tuning and multiple revisions
Xiangliang Yu [Tue, 24 May 2011 14:28:31 +0000]
[SCSI] mvsas: add support for 94xx phy tuning and multiple revisions

Add 94xx phy tuning to aid manufacturing.
Add support for 94xx multiple revisions: A0, B0, C0, C1, C2.

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years ago[SCSI] mvsas: Add support for Non specific NCQ error interrupt
Xiangliang Yu [Tue, 24 May 2011 14:26:50 +0000]
[SCSI] mvsas: Add support for Non specific NCQ error interrupt

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

8 years agoMerge 'akpm' patch series
Linus Torvalds [Tue, 26 Jul 2011 04:00:19 +0000]
Merge 'akpm' patch series

* Merge akpm patch series: (122 commits)
  drivers/connector/cn_proc.c: remove unused local
  Documentation/SubmitChecklist: add RCU debug config options
  reiserfs: use hweight_long()
  reiserfs: use proper little-endian bitops
  pnpacpi: register disabled resources
  drivers/rtc/rtc-tegra.c: properly initialize spinlock
  drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
  drivers/rtc: add support for Qualcomm PMIC8xxx RTC
  drivers/rtc/rtc-s3c.c: support clock gating
  drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
  init: skip calibration delay if previously done
  misc/eeprom: add eeprom access driver for digsy_mtc board
  misc/eeprom: add driver for microwire 93xx46 EEPROMs
  checkpatch.pl: update $logFunctions
  checkpatch: make utf-8 test --strict
  checkpatch.pl: add ability to ignore various messages
  checkpatch: add a "prefer __aligned" check
  checkpatch: validate signature styles and To: and Cc: lines
  checkpatch: add __rcu as a sparse modifier
  checkpatch: suggest using min_t or max_t
  ...

Did this as a merge because of (trivial) conflicts in
 - Documentation/feature-removal-schedule.txt
 - arch/xtensa/include/asm/uaccess.h
that were just easier to fix up in the merge than in the patch series.

8 years agodrivers/connector/cn_proc.c: remove unused local
Andrew Morton [Tue, 26 Jul 2011 00:13:39 +0000]
drivers/connector/cn_proc.c: remove unused local

Fix the warning

  drivers/connector/cn_proc.c: In function 'proc_ptrace_connector':
  drivers/connector/cn_proc.c:176: warning: unused variable 'tracer'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoDocumentation/SubmitChecklist: add RCU debug config options
Paul E. McKenney [Tue, 26 Jul 2011 00:13:38 +0000]
Documentation/SubmitChecklist: add RCU debug config options

There have been persistent lockdep RCU splats, indicating that submitters
are not testing with CONFIG_PROVE_RCU.  Add this config option to the list
in Documentation/SubmitChecklist.  Also add CONFIG_DEBUG_OBJECTS_RCU_HEAD
for good measure.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoreiserfs: use hweight_long()
Akinobu Mita [Tue, 26 Jul 2011 00:13:38 +0000]
reiserfs: use hweight_long()

Use hweight_long() to count free bits in the bitmap.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoreiserfs: use proper little-endian bitops
Akinobu Mita [Tue, 26 Jul 2011 00:13:37 +0000]
reiserfs: use proper little-endian bitops

Using __test_and_{set,clear}_bit_le() with ignoring its return value can
be replaced with __{set,clear}_bit_le().

This introduces reiserfs_{set,clear}_le_bit for __{set,clear}_bit_le and
does the above change with them.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agopnpacpi: register disabled resources
Witold Szczeponik [Tue, 26 Jul 2011 00:13:36 +0000]
pnpacpi: register disabled resources

When parsing PnP ACPI resource structures, it may happen that some of
the resources are disabled (in which case "the size" of the resource
equals zero).

The current solution is to skip these resources completely - with the
unfortunate side effect that they are not registered despite the fact
that they exist, after all.  (The downside of this approach is that
these resources cannot be used as templates for setting the actual
device's resources because they are missing from the template.) The
kernel's APM implementation does not suffer from this problem and
registers all resources regardless of "their size".

This patch fixes a problem with (at least) the vintage IBM ThinkPad 600E
(and most likely also with the 600, 600X, and 770X which have a very
similar layout) where some of its PnP devices support options where
either an IRQ, a DMA, or an IO port is disabled.  Without this patch,
the devices can not be configured using the
"/sys/bus/pnp/devices/*/resources" interface.

The manipulation of these resources is important because the 600E has
very demanding requirements.  For instance, the number of IRQs is not
sufficient to support all devices of the 600E.  Fortunately, some of the
devices, like the sound card's MPU-401 UART, can be configured to not
use any IRQ, hence freeing an IRQ for a device that requires one.
(Still, the device's "ResourceTemplate" requires an IRQ resource
descriptor which cannot be created if the resource has not been
registered in the first place.)

As an example, the dependent sets of the 600E's CSC0103 device (the
MPU-401 UART) are listed, with the patch applied, as:

  Dependent: 00 - Priority preferred
    port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding
    irq <none> High-Edge
  Dependent: 01 - Priority acceptable
    port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding
    irq 5,7,2/9,10,11,15 High-Edge

(The same result is obtained when PNPBIOS is used instead of PnP ACPI.)
Without the patch, the IRQ resource in the preferred option is not
listed at all:

  Dependent: 00 - Priority preferred
    port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding
  Dependent: 01 - Priority acceptable
    port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding
    irq 5,7,2/9,10,11,15 High-Edge

And in fact, the 600E's DSDT lists the disabled IRQ as an option, as can
be seen from the following excerpt from the DSDT:

Name (_PRS, ResourceTemplate ()
{
        StartDependentFn (0x00, 0x00)
        {
            IO (Decode16, 0x0300, 0x0330, 0x10, 0x04)
            IRQNoFlags () {}
        }
        StartDependentFn (0x01, 0x00)
        {
            IO (Decode16, 0x0300, 0x0330, 0x10, 0x04)
            IRQNoFlags () {5,7,9,10,11,15}
        }
        EndDependentFn ()
})

With this patch applied, a user space program - or maybe even the kernel
- can allocate all devices' resources optimally.  For the 600E, this
means to find optimal resources for (at least) the serial port, the
parallel port, the infrared port, the MWAVE modem, the sound card, and
the MPU-401 UART.

The patch applies the idea to register disabled resources to all types
of resources, not just to IRQs, DMAs, and IO ports.  At the same time,
it mimics the behavior of the "pnp_assign_xxx" functions from
"drivers/pnp/manager.c" where resources with "no size" are considered
disabled.

No regressions were observed on hardware that does not require this
patch.

The patch is applied against 2.6.39.

NB: The kernel's current PnP interface does not allow for disabling individual
resources using the "/sys/bus/pnp/devices/$device/resources" file.  Assuming
this could be done, a device could be configured to use a disabled resource
using a simple series of calls:

  echo disable > /sys/bus/pnp/devices/$device/resources
  echo clear > /sys/bus/pnp/devices/$device/resources
  echo set irq disabled > /sys/bus/pnp/devices/$device/resources
  echo fill > /sys/bus/pnp/devices/$device/resources
  echo activate > /sys/bus/pnp/devices/$device/resources

This patch addresses only the parsing of PnP ACPI devices.

ChangeLog (v1 -> v2):
 - extend patch description
 - fix typo in patch itself

Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <abelay@mit.edu>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-tegra.c: properly initialize spinlock
Uwe Kleine-König [Tue, 26 Jul 2011 00:13:34 +0000]
drivers/rtc/rtc-tegra.c: properly initialize spinlock

Using __SPIN_LOCK_UNLOCKED for a dynamically allocated lock is wrong and
breaks the build with PREEMPT_RT_FULL.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Andrew Chew <achew@nvidia.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
Jesper Juhl [Tue, 26 Jul 2011 00:13:34 +0000]
drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()

We forget to save the return value of the call to
twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); in 'ret', making the
test of 'ret < 0' dead code since 'ret' then couldn't possibly have
changed since the last test just a few lines above.  It also makes us not
detect failures from that specific twl_rtc_write_u8() call.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Rusev <source@mvista.com>
Cc: "George G. Davis" <gdavis@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc: add support for Qualcomm PMIC8xxx RTC
Anirudh Ghayal [Tue, 26 Jul 2011 00:13:33 +0000]
drivers/rtc: add support for Qualcomm PMIC8xxx RTC

Add support for PMIC8xxx based RTC.  PMIC8xxx is Qualcomm's power
management IC that internally houses an RTC module.  This driver
communicates with the PMIC module over SSBI bus.

[akpm@linux-foundation.org: cosmetic tweaks]
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-s3c.c: support clock gating
Donggeun Kim [Tue, 26 Jul 2011 00:13:32 +0000]
drivers/rtc/rtc-s3c.c: support clock gating

Add support for clock gating.  Power consumption can be reduced by setting
rtc_clk disabled state except for when RTC related registers are accessed.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ben Dooks <ben@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
Dmitry Eremin-Solenikov [Tue, 26 Jul 2011 00:13:30 +0000]
drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200

MPC5200B contains a limited version of RTC from MPC5121.  Add support for
the RTC on that CPU.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoinit: skip calibration delay if previously done
Sameer Nanda [Tue, 26 Jul 2011 00:13:29 +0000]
init: skip calibration delay if previously done

For each CPU, do the calibration delay only once.  For subsequent calls,
use the cached per-CPU value of loops_per_jiffy.

This saves about 200ms of resume time on dual core Intel Atom N5xx based
systems.  This helps bring down the kernel resume time on such systems
from about 500ms to about 300ms.

[akpm@linux-foundation.org: make cpu_loops_per_jiffy static]
[akpm@linux-foundation.org: clean up message text]
[akpm@linux-foundation.org: fix things up after upstream rmk changes]
Signed-off-by: Sameer Nanda <snanda@chromium.org>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Andrew Worsley <amworsley@gmail.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomisc/eeprom: add eeprom access driver for digsy_mtc board
Anatolij Gustschin [Tue, 26 Jul 2011 00:13:29 +0000]
misc/eeprom: add eeprom access driver for digsy_mtc board

Both displays on digsy_mtc board obtain their configuration from microwire
EEPROMs which are connected to the SoC over GPIO lines.  We need an easy
way to access the EEPROMs to write the needed display configuration or to
read out the currently programmed configuration.  The generic
eeprom_93xx46 SPI driver added by previous patch allows EEPROM access over
sysfs.  Using the simple driver added by this patch we provide used GPIO
interface and access control description on the board for generic
eeprom_93xx46 driver and spi_gpio driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomisc/eeprom: add driver for microwire 93xx46 EEPROMs
Anatolij Gustschin [Tue, 26 Jul 2011 00:13:27 +0000]
misc/eeprom: add driver for microwire 93xx46 EEPROMs

Add EEPROM driver for 93xx46 chips.  It can also be used with spi_gpio
driver to access 93xx46 EEPROMs connected over GPIO lines.  This driver
supports read/write/erase access to the EEPROM chips over sysfs files.

[rdunlap@xenotime.net: fix printk format]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocheckpatch.pl: update $logFunctions
Joe Perches [Tue, 26 Jul 2011 00:13:27 +0000]
checkpatch.pl: update $logFunctions

Previous behavior allowed only alphabetic prefixes like pr_info to exceed
the 80 column line length limit.

ath6kl wants to add a digit into the prefix, so allow numbers as well as
digits in the <prefix>_<level> printks.

<prefix>_<level>_ratelimited and <prefix>_<level>_once and WARN_RATELIMIT
and WARN_ONCE may now exceed 80 cols.

Add missing <prefix>_printk type for completeness.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocheckpatch: make utf-8 test --strict
Joe Perches [Tue, 26 Jul 2011 00:13:26 +0000]
checkpatch: make utf-8 test --strict

Some patches are sent in using ISO-8859 or even Windows codepage 1252.

Make checkpatch accept these by default and only emit the "Invalid UTF-8"
message when using --strict.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocheckpatch.pl: add ability to ignore various messages
Joe Perches [Tue, 26 Jul 2011 00:13:25 +0000]
checkpatch.pl: add ability to ignore various messages

Some users would like the ability to not emit some of the messages that
checkpatch produces.  This can make it easier to use checkpatch in other
projects and integrate into scm hook scripts.

Add command line option to "--ignore" various message types.  Add option
--show-types to emit the "type" of each message.  Categorize all ERROR,
WARN and CHK messages with types.

Add optional .checkpatch.conf file to store default options.
3 paths are searched for .checkpatch.conf
    .             customized per-tree configurations
    $HOME         user global configuration when per-tree configs don't exist
    ./scripts     lk defaults to override script
The .conf file can contain any valid command-line argument and
the contents are prepended to any additional command line arguments.
Multiple lines may be used, blank lines are ignored, # is a comment.

Update "false positive" output for readability.

Update version to 0.32

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocheckpatch: add a "prefer __aligned" check
Joe Perches [Tue, 26 Jul 2011 00:13:24 +0000]
checkpatch: add a "prefer __aligned" check

Prefer the use of __aligned(size) over __attribute__((__aligned___(size)))

Link: http://lkml.kernel.org/r/20110609094526.1571774c.akpm@linux-foundation.org

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocheckpatch: validate signature styles and To: and Cc: lines
Joe Perches [Tue, 26 Jul 2011 00:13:23 +0000]
checkpatch: validate signature styles and To: and Cc: lines

Signatures have many forms and can sometimes cause problems if not in the
correct format when using git send-email or quilt.

Try to verify the signature tags and email addresses to use the generally
accepted "Signed-off-by: Full Name <email@domain.tld>" form.

Original idea by Anish Kumar <anish198519851985@gmail.com>

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Anish Kumar <anish198519851985@gmail.com>
Cc: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocheckpatch: add __rcu as a sparse modifier
Sven Eckelmann [Tue, 26 Jul 2011 00:13:23 +0000]
checkpatch: add __rcu as a sparse modifier

Fix "need consistent spacing around '*'" error after a __rcu sparse
annotation which was caused by the missing __rcu entry in the
checkpatch.pl internal list of sparse keywords.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocheckpatch: suggest using min_t or max_t
Joe Perches [Tue, 26 Jul 2011 00:13:22 +0000]
checkpatch: suggest using min_t or max_t

A common issue with min() or max() is using a cast on one or both of the
arguments when using min_t/max_t could be better.

Add cast detection to uses of min/max and suggest an appropriate use of
min_t or max_t instead.

Caveat:  This only works for min() or max() on a single line.
         It does not find min() or max() split across multiple lines.

This does find:
min((u32)foo, bar);
But it does not find:
max((unsigned long)foo,
    bar);

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/firmware/sigma.c needs MODULE_LICENSE
Randy Dunlap [Tue, 26 Jul 2011 00:13:21 +0000]
drivers/firmware/sigma.c needs MODULE_LICENSE

Fix module tainting message:

  sigma: module license 'unspecified' taints kernel.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agolib: make _tolower() public
Andy Shevchenko [Tue, 26 Jul 2011 00:13:20 +0000]
lib: make _tolower() public

This function is required by *printf and kstrto* functions that are
located in the different modules.  This patch makes _tolower() public.
However, it's good idea to not use the helper outside of mentioned
functions.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agolib/lcm.c: quiet sparse noise
H Hartley Sweeten [Tue, 26 Jul 2011 00:13:20 +0000]
lib/lcm.c: quiet sparse noise

The symbol 'lcm' is exported to the kernel (EXPORT_SYMBOL_GPL).
Pick up it's definition in <linux/lcm.h> to quiet the sparse noise:

  warning: symbol 'lcm' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomach-ux500: add lm3530 ALS platform data for U5500
Linus Walleij [Tue, 26 Jul 2011 00:13:18 +0000]
mach-ux500: add lm3530 ALS platform data for U5500

From: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>

platform data for simple backlight driver for LM3530
in the u5500 platform

Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoarch/arm/mach-ux500/board-u5500.c: calibrate ALS input voltage
Shreshtha Kumar Sahu [Tue, 26 Jul 2011 00:13:17 +0000]
arch/arm/mach-ux500/board-u5500.c: calibrate ALS input voltage

Provide the support for auto calibration of ALS Zone boundaries based on
min/max ALS input voltage.

Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/leds/leds-netxbig: make LEDS_NETXBIG depend on LEDS_CLASS
Axel Lin [Tue, 26 Jul 2011 00:13:16 +0000]
drivers/leds/leds-netxbig: make LEDS_NETXBIG depend on LEDS_CLASS

We call led_classdev_register/led_classdev_unregister in
create_netxbig_led/delete_netxbig_led, thus make LEDS_NETXBIG depend on
LEDS_CLASS.

This patch fixes below build error if LEDS_CLASS is not configured.

    LD      .tmp_vmlinux1
  drivers/built-in.o: In function `create_netxbig_led':
  drivers/leds/leds-netxbig.c:350: undefined reference to `led_classdev_register'
  drivers/leds/leds-netxbig.c:361: undefined reference to `led_classdev_unregister'
  drivers/built-in.o: In function `delete_netxbig_led':
  drivers/leds/leds-netxbig.c:313: undefined reference to `led_classdev_unregister'

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/leds/leds-sunfire.c: fix sunfire_led_generic_probe() error handling
Axel Lin [Tue, 26 Jul 2011 00:13:16 +0000]
drivers/leds/leds-sunfire.c: fix sunfire_led_generic_probe() error handling

- return -ENOMEM if kzalloc fails, rather than the current -EINVAL

- fix a memory leak in the case of goto out_unregister_led_cdevs

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/leds/leds-lp5521.c: provide section tagging
Linus Walleij [Tue, 26 Jul 2011 00:13:15 +0000]
drivers/leds/leds-lp5521.c: provide section tagging

Tag the and remove() function as __devexit respectively.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: update HIGH RESOLUTION TIMERS patterns
Joe Perches [Tue, 26 Jul 2011 00:13:14 +0000]
MAINTAINERS: update HIGH RESOLUTION TIMERS patterns

clockchips.h was typoed as clockevents.h

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoget_maintainers.pl: improve .mailmap parsing
Joe Perches [Tue, 26 Jul 2011 00:13:13 +0000]
get_maintainers.pl: improve .mailmap parsing

Entries that used formats other than "Proper Name <commit@email.xx>"
were not parsed properly.

Try to improve the parsing so that the entries in the forms of:
    Proper Name <proper@email.xx> <commit@email.xx>
and
    Proper Name <proper@email.xx> Commit Name <commit@email.xx>
are transformed correctly.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agokernel/configs.c: include MODULE_*() when CONFIG_IKCONFIG_PROC=n
Stephen Boyd [Tue, 26 Jul 2011 00:13:12 +0000]
kernel/configs.c: include MODULE_*() when CONFIG_IKCONFIG_PROC=n

If CONFIG_IKCONFIG=m but CONFIG_IKCONFIG_PROC=n we get a module that has
no MODULE_LICENSE definition.  Move the MODULE_*() definitions outside the
CONFIG_IKCONFIG_PROC #ifdef to prevent this configuration from tainting
the kernel.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonotifiers: vt: move vt notifiers into vt.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:12 +0000]
notifiers: vt: move vt notifiers into vt.h

It is not necessary to share the same notifier.h.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonotifiers: pm: move pm notifiers into suspend.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:11 +0000]
notifiers: pm: move pm notifiers into suspend.h

It is not necessary to share the same notifier.h.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonotifiers: sys: move reboot notifiers into reboot.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:10 +0000]
notifiers: sys: move reboot notifiers into reboot.h

It is not necessary to share the same notifier.h.

This patch already moves register_reboot_notifier() and
unregister_reboot_notifier() from kernel/notifier.c to kernel/sys.c.

[amwang@redhat.com: make allyesconfig succeed on ppc64]
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonotifiers: net: move netdevice notifiers into netdevice.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:09 +0000]
notifiers: net: move netdevice notifiers into netdevice.h

It is not necessary to share the same notifier.h.

Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonotifiers: cpu: move cpu notifiers into cpu.h
Amerigo Wang [Tue, 26 Jul 2011 00:13:08 +0000]
notifiers: cpu: move cpu notifiers into cpu.h

We presently define all kinds of notifiers in notifier.h.  This is not
necessary at all, since different subsystems use different notifiers, they
are almost non-related with each other.

This can also save much build time.  Suppose I add a new netdevice event,
really I don't have to recompile all the source, just network related.
Without this patch, all the source will be recompiled.

I move the notify events near to their subsystem notifier registers, so
that they can be found more easily.

This patch:

It is not necessary to share the same notifier.h.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/misc: add support the FSA9480 USB Switch
Donggeun Kim [Tue, 26 Jul 2011 00:13:07 +0000]
drivers/misc: add support the FSA9480 USB Switch

The FSA9480 is a USB port accessory detector and switch.  This patch adds
support the FSA9480 USB Switch.

[akpm@linux-foundation.org: make a couple of things static]
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agogeode: reflect mfgpt dependency on mfd
Philip A. Prindeville [Tue, 26 Jul 2011 00:13:05 +0000]
geode: reflect mfgpt dependency on mfd

As stated in drivers/mfd/cs5535-mfd.c, the mfd driver exposes the BARs
which then make the GPIO, MFGPT, ACPI, etc.  all visible to the system.

So the dependencies of the MFGPT stuff have changed, and most people
expect Kconfig to bring in the necessary dependencies.  Without them, the
module fails to load and most people don't understand why because the
details of the rewrite aren't captured anywhere most people who know to
look.

This dependency needs to be reflected in Kconfig.

Signed-off-by: Philip A. Prindeville <philipp@redfish-solutions.com>
Acked-by: Alexandros C. Couloumbis <alex@ozo.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoeisa/pci_eisa.c: fix section mismatch
Arnaud Lacombe [Tue, 26 Jul 2011 00:13:04 +0000]
eisa/pci_eisa.c: fix section mismatch

Fixes

  WARNING: vmlinux.o(.data+0x15d3ac): Section mismatch in reference from the variable pci_eisa_driver to the function .init.text:pci_eisa_init()
  The variable pci_eisa_driver references the function __init pci_eisa_init()
  If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable:
  *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoinclude/linux/kernel.h: hide internal macros from userspace
Arnaud Lacombe [Tue, 26 Jul 2011 00:13:03 +0000]
include/linux/kernel.h: hide internal macros from userspace

Unexpose to userland the following macros
 - __FUNCTION__
 - NUMA_BUILD
 - COMPACTION_BUILD
 - REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>