7 years agoARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found
Russell King [Tue, 7 Feb 2012 09:42:11 +0000]
ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found

When the PMIC is not found, voltdm->pmic will be NULL.  vp.c's
initialization function tries to dereferences this, which causes an
oops:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT
Modules linked in:
CPU: 0    Not tainted  (3.3.0-rc2+ #204)
PC is at omap_vp_init+0x5c/0x15c
LR is at omap_vp_init+0x58/0x15c
pc : [<c03db880>]    lr : [<c03db87c>]    psr: 60000013
sp : c181ff30  ip : c181ff68  fp : c181ff64
r10: c0407808  r9 : c040786c  r8 : c0407814
r7 : c0026868  r6 : c00264fc  r5 : c040ad6c  r4 : 00000000
r3 : 00000040  r2 : 000032c8  r1 : 0000fa00  r0 : 000032c8
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 80004019  DAC: 00000015
Process swapper (pid: 1, stack limit = 0xc181e2e8)
Stack: (0xc181ff30 to 0xc1820000)
ff20:                                     c0381d00 c02e9c6d c0383582 c040786c
ff40: c040ad6c c00264fc c0026868 c0407814 00000000 c03d9de4 c181ff8c c181ff68
ff60: c03db448 c03db830 c02e982c c03fdfb8 c03fe004 c0039988 00000013 00000000
ff80: c181ff9c c181ff90 c03d9df8 c03db390 c181ffdc c181ffa0 c0008798 c03d9df0
ffa0: c181ffc4 c181ffb0 c0055a44 c0187050 c0039988 c03fdfb8 c03fe004 c0039988
ffc0: 00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03d1284 c0008708
ffe0: 00000000 c03d1208 00000000 c181fff8 c0039988 c03d1214 1077ce40 01f7ee08
Backtrace:
[<c03db824>] (omap_vp_init+0x0/0x15c) from [<c03db448>] (omap_voltage_late_init+0xc4/0xfc)
[<c03db384>] (omap_voltage_late_init+0x0/0xfc) from [<c03d9df8>] (omap2_common_pm_late_init+0x14/0x54)
 r8:00000000 r7:00000013 r6:c0039988 r5:c03fe004 r4:c03fdfb8
[<c03d9de4>] (omap2_common_pm_late_init+0x0/0x54) from [<c0008798>] (do_one_initcall+0x9c/0x164)
[<c00086fc>] (do_one_initcall+0x0/0x164) from [<c03d1284>] (kernel_init+0x7c/0x120)
[<c03d1208>] (kernel_init+0x0/0x120) from [<c0039988>] (do_exit+0x0/0x2cc)
 r5:c03d1208 r4:00000000
Code: e5ca300b e5900034 ebf69027 e5994024 (e5941000)
---[ end trace aed617dddaf32c3d ]---
Kernel panic - not syncing: Attempted to kill init!

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoARM: 7322/1: Print BUG instead of undefined instruction on BUG_ON()
Stephen Boyd [Tue, 7 Feb 2012 18:42:33 +0000]
ARM: 7322/1: Print BUG instead of undefined instruction on BUG_ON()

The ARM kernel uses undefined instructions to implement
BUG/BUG_ON(). This leads to problems where people don't read one
line above the Oops message and see the "kernel BUG at ..."
message and so they wrongly assume the kernel has hit an
undefined instruction.

Instead of printing:

 Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP

print

 Internal error: Oops - BUG: 0 [#1] PREEMPT SMP

This should prevent people from thinking the BUG_ON was an
undefined instruction when it was actually intentional.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR
Stephen Boyd [Tue, 7 Feb 2012 18:42:07 +0000]
ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR

armv7's flush_cache_all() flushes caches via set/way. To
determine the cache attributes (line size, number of sets,
etc.) the assembly first writes the CSSELR register to select a
cache level and then reads the CCSIDR register. The CSSELR register
is banked per-cpu and is used to determine which cache level CCSIDR
reads. If the task is migrated between when the CSSELR is written and
the CCSIDR is read the CCSIDR value may be for an unexpected cache
level (for example L1 instead of L2) and incorrect cache flushing
could occur.

Disable interrupts across the write and read so that the correct
cache attributes are read and used for the cache flushing
routine. We disable interrupts instead of disabling preemption
because the critical section is only 3 instructions and we want
to call v7_dcache_flush_all from __v7_setup which doesn't have a
full kernel stack with a struct thread_info.

This fixes a problem we see in scm_call() when flush_cache_all()
is called from preemptible context and sometimes the L2 cache is
not properly flushed out.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoARM: 7320/1: Fix proc_info table alignment
Marc Zyngier [Tue, 7 Feb 2012 01:46:38 +0000]
ARM: 7320/1: Fix proc_info table alignment

With an admittedly exotic choice of configuration options
(CC_OPTIMIZE_FOR_SIZE, THUMB2, some other size-minimizing ones)
and compiler, the proc_info table can end up being misaligned,
and the kernel being unbootable (Error: unrecognized/unsupported
processor variant).

Forcing the alignement to 4 bytes in the linker script fixes the
issue.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

7 years agoASoC: fsi: fixup fsi_pointer() calculation method
Kuninori Morimoto [Thu, 9 Feb 2012 00:57:29 +0000]
ASoC: fsi: fixup fsi_pointer() calculation method

current fsi_pointer() calculation was not correct for FSI driver.
This patch fix it up.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

7 years agoixgbe: ethtool: stats user buffer overrun
John Fastabend [Sat, 28 Jan 2012 03:32:17 +0000]
ixgbe: ethtool: stats user buffer overrun

If the number of tx/rx queues changes the ethtool ioctl
ETHTOOL_GSTATS may overrun the userspace buffer. This
occurs because the general practice in user space to
query stats is to issue a ETHTOOL_GSSET cmd to learn the
buffer size needed, allocate the buffer, then call
ETHTOOL_GSTIRNGS and ETHTOOL_GSTATS. If the number of
real_num_queues is changed or flow control attributes
are changed after ETHTOOL_GSSET but before the
ETHTOOL_GSTRINGS/ETHTOOL_GSTATS a user space buffer
overrun occurs.

To fix the overrun always return the max buffer size
needed from get_sset_count() then return all strings
and stats from get_strings()/get_ethtool_stats().

This _will_ change the output from the ioctl() call
which could break applications and script parsing in
theory. I believe these changes should not break existing
tools because the only changes will be more {tx|rx}_queues
and the {tx|rx}_pb_* stats will always be returned.
Existing scripts already need to handle changing number
of queues because this occurs today depending on system
and current features. The {tx|rx}_pb_* stats are at the
end of the output and should be handled by scripts today
regardless.

Finally get_ethtool_stats and get_strings are free-form
outputs tools parsing these outputs should be defensive
anyways. In the end these updates are better then
having a tool segfault because of a buffer overrun.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 years agoixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state
John Fastabend [Sat, 28 Jan 2012 01:22:35 +0000]
ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state

Users expect the up2tc mapping to be maintained across a DCB
enable/disable/enable transition. And since we maintain all
the other DCB attributes we should do this for up2tc mappings
as well just to be consistent. Also without this we break
user space applications that expect this to occur that
previously worked.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 years agoixgbe: do not update real num queues when netdev is going away
Yi Zou [Sat, 7 Jan 2012 08:39:50 +0000]
ixgbe: do not update real num queues when netdev is going away

If the netdev is already in NETREG_UNREGISTERING/_UNREGISTERED state, do not
update the real num tx queues. netdev_queue_update_kobjects() is already
called via remove_queue_kobjects() at NETREG_UNREGISTERING time. So, when
upper layer driver, e.g., FCoE protocol stack is monitoring the netdev
event of NETDEV_UNREGISTER and calls back to LLD ndo_fcoe_disable() to remove
extra queues allocated for FCoE, the associated txq sysfs kobjects are already
removed, and trying to update the real num queues would cause something like
below:

...
PID: 25138  TASK: ffff88021e64c440  CPU: 3   COMMAND: "kworker/3:3"
 #0 [ffff88021f007760] machine_kexec at ffffffff810226d9
 #1 [ffff88021f0077d0] crash_kexec at ffffffff81089d2d
 #2 [ffff88021f0078a0] oops_end at ffffffff813bca78
 #3 [ffff88021f0078d0] no_context at ffffffff81029e72
 #4 [ffff88021f007920] __bad_area_nosemaphore at ffffffff8102a155
 #5 [ffff88021f0079f0] bad_area_nosemaphore at ffffffff8102a23e
 #6 [ffff88021f007a00] do_page_fault at ffffffff813bf32e
 #7 [ffff88021f007b10] page_fault at ffffffff813bc045
    [exception RIP: sysfs_find_dirent+17]
    RIP: ffffffff81178611  RSP: ffff88021f007bc0  RFLAGS: 00010246
    RAX: ffff88021e64c440  RBX: ffffffff8156cc63  RCX: 0000000000000004
    RDX: ffffffff8156cc63  RSI: 0000000000000000  RDI: 0000000000000000
    RBP: ffff88021f007be0   R8: 0000000000000004   R9: 0000000000000008
    R10: ffffffff816fed00  R11: 0000000000000004  R12: 0000000000000000
    R13: ffffffff8156cc63  R14: 0000000000000000  R15: ffff8802222a0000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ffff88021f007be8] sysfs_get_dirent at ffffffff81178c07
 #9 [ffff88021f007c18] sysfs_remove_group at ffffffff8117ac27
#10 [ffff88021f007c48] netdev_queue_update_kobjects at ffffffff813178f9
#11 [ffff88021f007c88] netif_set_real_num_tx_queues at ffffffff81303e38
#12 [ffff88021f007cc8] ixgbe_set_num_queues at ffffffffa0249763 [ixgbe]
#13 [ffff88021f007cf8] ixgbe_init_interrupt_scheme at ffffffffa024ea89 [ixgbe]
#14 [ffff88021f007d48] ixgbe_fcoe_disable at ffffffffa0267113 [ixgbe]
#15 [ffff88021f007d68] vlan_dev_fcoe_disable at ffffffffa014fef5 [8021q]
#16 [ffff88021f007d78] fcoe_interface_cleanup at ffffffffa02b7dfd [fcoe]
#17 [ffff88021f007df8] fcoe_destroy_work at ffffffffa02b7f08 [fcoe]
#18 [ffff88021f007e18] process_one_work at ffffffff8105d7ca
#19 [ffff88021f007e68] worker_thread at ffffffff81060513
#20 [ffff88021f007ee8] kthread at ffffffff810648b6
#21 [ffff88021f007f48] kernel_thread_helper at ffffffff813c40f4

Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 years agoixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size
Alexander Duyck [Thu, 10 Nov 2011 09:09:17 +0000]
ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size

This patch fixes an issue in which RSC will generate corrupted frames when
PAGE_SIZE is larger than 8K.  Specifically it looks like that in 2.6.39 a
change was made so that GRO would always have at least 16 frags available
for coalescing, but the ixgbe RSC logic was not updated.  As such the RSC
feature would generate a frame larger than 64K and then overflow the value
in the IP length field.

To correct that I am now basing things on the PAGE_SIZE.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 years agoixgbe: Fix case of Tx Hang in PF with 32 VFs
Greg Rose [Wed, 25 Jan 2012 07:59:37 +0000]
ixgbe: Fix case of Tx Hang in PF with 32 VFs

A check for the number of VFs allocated should have used a greater than
equal operator instead of just greater than.  This caused allocation of
exactly 32 VFs to not enable the PF transmit and receive enables.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 years agoixgbe: fix vf lookup
Greg Rose [Fri, 3 Feb 2012 00:54:13 +0000]
ixgbe: fix vf lookup

Recent addition of code to find already allocated VFs failed to take
account that systems with 2 or more multi-port SR-IOV capable controllers
might have already enabled VFs.  Make sure that the VFs the function is
finding are actually subordinate to the particular instance of the adapter
that is looking for them and not subordinate to some device that has
previously enabled SR-IOV.

This bug exists in 3.2 stable as well as 3.3 release candidates.

CC: stable@vger.kernel.org
Reported-by: David Ahern <daahern@cisco.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 years agoigb: fix vf lookup
Greg Rose [Thu, 2 Feb 2012 23:51:43 +0000]
igb: fix vf lookup

Recent addition of code to find already allocated VFs failed to take
account that systems with 2 or more multi-port SR-IOV capable controllers
might have already enabled VFs.  Make sure that the VFs the function is
finding are actually subordinate to the particular instance of the adapter
that is looking for them and not subordinate to some device that has
previously enabled SR-IOV.

This is applicable to 3.2+ kernels.

CC: stable@vger.kernel.org
Reported-by: David Ahern <daahern@cisco.com>
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 years agoe1000: add dropped DMA receive enable back in for WoL
Dean Nelson [Thu, 19 Jan 2012 17:47:24 +0000]
e1000: add dropped DMA receive enable back in for WoL

Commit d5bc77a223b0e9b9dfb002048d2b34a79e7d0b48 broke Wake-on-LAN by
inadvertently dropping the enabling of DMA receives.

Restore the enabling of DMA receives for WoL.

This is applicable to 3.1+ stable trees.

CC: stable@vger.stable.org
Reported-by: Tobias Klausmann <klausman@schwarzvogel.de>
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Tested-by: Tobias Klausmann <klausman@schwarzvogel.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 years agoALSA: hda - Fix mute-LED VREF value for new HP laptops
Takashi Iwai [Thu, 9 Feb 2012 08:32:19 +0000]
ALSA: hda - Fix mute-LED VREF value for new HP laptops

The new HP laptops turns off the mute LED with VREF50 or VREF80, but
not in HIZ unlike the previous models.  Since VREF50 (also 80) works
with the previous models, let's use VREF50 for all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agohwmon: (f75375s) Fix bit shifting in f75375_write16
Nikolaus Schulz [Wed, 8 Feb 2012 17:56:10 +0000]
hwmon: (f75375s) Fix bit shifting in f75375_write16

In order to extract the high byte of the 16-bit word, shift the word to
the right, not to the left.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Cc: stable@kernel.org # 2.6.32+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

7 years agohwmon: (f75375s) Fix reading of wrong register when initializing the F75387
Nikolaus Schulz [Wed, 8 Feb 2012 17:56:09 +0000]
hwmon: (f75375s) Fix reading of wrong register when initializing the F75387

Unlike the other chips supported by this driver, the F75387 stores the
pwm_mode in register F75375_REG_FAN_TIMER, not F75375_REG_CONFIG1.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

7 years agohwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375
Nikolaus Schulz [Wed, 8 Feb 2012 17:56:08 +0000]
hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375

In order to enable temperature mode aka automatic mode for the F75373 and
F75375 chips, the two FANx_MODE bits in the fan configuration register
need be set to 01, not 10.

Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Cc: stable@kernel.org # 2.6.32+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

7 years agohwmon: (w83627ehf) Remove duplicate code
Guenter Roeck [Tue, 7 Feb 2012 09:46:42 +0000]
hwmon: (w83627ehf) Remove duplicate code

Commit ec3e5a16446fef1891611fe3bdfa5954d1ddf5e4 slipped in some duplicate code.
Remove it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>

7 years agoLinux 3.3-rc3
Linus Torvalds [Thu, 9 Feb 2012 03:21:53 +0000]
Linux 3.3-rc3

7 years agoMerge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro...
Linus Torvalds [Thu, 9 Feb 2012 03:11:00 +0000]
Merge branch 'iommu/fixes' of git://git./linux/kernel/git/joro/iommu

One patch fixes an bug in the ARM/MSM IOMMU code which returned sucess
in the unmap function even when an error occured and the other patch
adds a workaround into the AMD IOMMU driver to better handle broken IVRS
ACPI tables (this patch fixes the case when a device is not listed in
the table but actually translated by the iommu).

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/msm: Fix error handling in msm_iommu_unmap()
  iommu/amd: Work around broken IVRS tables

7 years agoMerge branch '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab...
Linus Torvalds [Thu, 9 Feb 2012 03:09:25 +0000]
Merge branch '3.3-rc-fixes' of git://git./linux/kernel/git/nab/target-pending

This series contains pending target bug-fixes and cleanups for v3.3-rc3
that have been addressed the past weeks in lio-core.git.

Some of the highlights include:

 - Fix handling for control CDBs with data greater than PAGE_SIZE (andy)
 - Use IP_FREEBIND for iscsi-target to address network portal creation
   issues with systemd (dax)
 - Allow PERSISTENT RESERVE IN for non-reservation holder (marco)
 - Fix iblock se_dev_attrib.unmap_granularity (marco)
 - Fix unsupported WRITE_SAME sense payload handling (martin)
 - Add workaround for zero-length control CDB handling (nab)
 - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab)
 - Fix target_submit_cmd() exception handling (nab)
 - Return correct ASC for unimplemented VPD pages (roland)
 - Don't zero pages used for data buffers (roland)
 - Fix return code of core_tpg_.*_lun (sebastian)

* '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Fix unsupported WRITE_SAME sense payload
  iscsi: use IP_FREEBIND socket option
  iblock: fix handling of large requests
  target: handle empty string writes in sysfs
  iscsi_target: in_aton needs linux/inet.h
  target: Fix iblock se_dev_attrib.unmap_granularity
  target: Fix target_submit_cmd() exception handling
  target: Change target_submit_cmd() to return void
  target: accept REQUEST_SENSE with 18bytes
  target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0
  target: Return correct ASC for unimplemented VPD pages
  iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT
  target: Allow control CDBs with data > 1 page
  iscsi-target: Fix up a few assignments
  iscsi-target: make one-bit bitfields unsigned
  iscsi-target: Fix double list_add with iscsit_alloc_buffs reject
  iscsi-target: Fix reject release handling in iscsit_free_cmd()
  target: fix return code of core_tpg_.*_lun
  target: use save/restore lock primitive in core_dec_lacl_count()
  target: avoid multiple outputs in scsi_dump_inquiry()
  ...

7 years agoMerge tag 'md-3.3-fixes' of git://neil.brown.name/md
Linus Torvalds [Thu, 9 Feb 2012 03:06:30 +0000]
Merge tag 'md-3.3-fixes' of git://neil.brown.name/md

Some simple md-related fixes.

1/ two small fixes to ensure we handle an interrupted resync properly.
2/ avoid loading the bitmap multiple times in dm-raid

* tag 'md-3.3-fixes' of git://neil.brown.name/md:
  md: two small fixes to handling interrupt resync.
  Prevent DM RAID from loading bitmap twice.

7 years agoMerge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Thu, 9 Feb 2012 03:05:47 +0000]
Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

SPI bug fixes for v3.3-rc2

Minor SPI device driver changes.  A rename of the pch_spi_pcidev symbol
that merely eliminates a modpost warning, and a Kconfig change to allow
the Samsung spi driver to build on EXYNOS.

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver
  spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4

7 years agoMerge branch 'akpm' (Andrew's tree)
Linus Torvalds [Thu, 9 Feb 2012 03:04:47 +0000]
Merge branch 'akpm' (Andrew's tree)

Five fixes

* branch 'akpm':
  pcmcia: fix socket refcount decrementing on each resume
  mm: fix UP THP spin_is_locked BUGs
  drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax
  mm: compaction: check for overlapping nodes during isolation for migration
  nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()

7 years agopcmcia: fix socket refcount decrementing on each resume
Russell King [Thu, 9 Feb 2012 01:13:41 +0000]
pcmcia: fix socket refcount decrementing on each resume

This fixes a memory-corrupting bug: not only does it cause the warning,
but as a result of dropping the refcount to zero, it causes the
pcmcia_socket0 device structure to be freed while it still has
references, causing slab caches corruption.  A fatal oops quickly
follows this warning - often even just a 'dmesg' following the warning
causes the kernel to oops.

While testing suspend/resume on an ARM device with PCMCIA support, and a
CF card inserted, I found that after five suspend and resumes, the
kernel would complain, and shortly die after with slab corruption.

  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()

As the message doesn't give a clue about which kobject, and the built-in
debugging in drivers/base/power/main.c happens too late, this was added
right before each get_device():

  printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount));

and on the 3rd s2ram cycle, the following behaviour observed:

On the 3rd suspend/resume cycle:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume: c1a0d998 [pcmcia_socket0] 3
  dpm_complete: c1a0d998 [pcmcia_socket0] 2

4th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume: c1a0d998 [pcmcia_socket0] 2
  dpm_complete: c1a0d998 [pcmcia_socket0] 1

5th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume: c1a0d998 [pcmcia_socket0] 1
  dpm_complete: c1a0d998 [pcmcia_socket0] 0
  ------------[ cut here ]------------
  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
  Modules linked in: ucb1x00_core
  Backtrace:
  [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c)
  [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68)
  [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28)
  [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50)
  [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24)
  [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20)
  ...

Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"),
the following change was made to cs.c:

                return 0;
        }
 #endif
-
-       send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
+       if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+               skt->callback->early_resume(skt);
        return 0;
 }

And the corresponding change in ds.c is from:

-static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
-{
-       struct pcmcia_socket *s = pcmcia_get_socket(skt);
...
-       switch (event) {
...
-       case CS_EVENT_PM_RESUME:
-               if (verify_cis_cache(skt) != 0) {
-                       dev_dbg(&skt->dev, "cis mismatch - different card\n");
-                       /* first, remove the card */
-                       ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
-                       mutex_lock(&s->ops_mutex);
-                       destroy_cis_cache(skt);
-                       kfree(skt->fake_cis);
-                       skt->fake_cis = NULL;
-                       s->functions = 0;
-                       mutex_unlock(&s->ops_mutex);
-                       /* now, add the new card */
-                       ds_event(skt, CS_EVENT_CARD_INSERTION,
-                                CS_EVENT_PRI_LOW);
-               }
-               break;
...
-    }

-    pcmcia_put_socket(s);

-    return 0;
-} /* ds_event */

to:

+static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
+{
+       if (!verify_cis_cache(skt)) {
+               pcmcia_put_socket(skt);
+               return 0;
+       }

+       dev_dbg(&skt->dev, "cis mismatch - different card\n");

+       /* first, remove the card */
+       pcmcia_bus_remove(skt);
+       mutex_lock(&skt->ops_mutex);
+       destroy_cis_cache(skt);
+       kfree(skt->fake_cis);
+       skt->fake_cis = NULL;
+       skt->functions = 0;
+       mutex_unlock(&skt->ops_mutex);

+       /* now, add the new card */
+       pcmcia_bus_add(skt);
+       return 0;
+}

As can be seen, the original function called pcmcia_get_socket() and
pcmcia_put_socket() around the guts, whereas the replacement code
calls pcmcia_put_socket() only in one path.  This creates an imbalance
in the refcounting.

Testing with pcmcia_put_socket() put removed shows that the bug is gone:

  dpm_suspend: c1a10998 [pcmcia_socket0] 5
  dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume: c1a10998 [pcmcia_socket0] 5
  dpm_complete: c1a10998 [pcmcia_socket0] 5

Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agomm: fix UP THP spin_is_locked BUGs
Hugh Dickins [Thu, 9 Feb 2012 01:13:40 +0000]
mm: fix UP THP spin_is_locked BUGs

Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false,
and so triggers some BUGs in Transparent HugePage codepaths.

asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x);
but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE,
VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax
Axel Lin [Thu, 9 Feb 2012 01:13:39 +0000]
drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax

In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and
pltfm->als_vmax is 0.  This does not make sense.  I think what we want
here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV.

Both als_vmin and als_vmax local variables will be set to
pltfm->als_vmin and pltfm->als_vmax by a few lines latter.  Thus also
remove a redundant assignment for als_vmin and als_vmax in this patch.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Tested-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agomm: compaction: check for overlapping nodes during isolation for migration
Mel Gorman [Thu, 9 Feb 2012 01:13:38 +0000]
mm: compaction: check for overlapping nodes during isolation for migration

When isolating pages for migration, migration starts at the start of a
zone while the free scanner starts at the end of the zone.  Migration
avoids entering a new zone by never going beyond the free scanned.

Unfortunately, in very rare cases nodes can overlap.  When this happens,
migration isolates pages without the LRU lock held, corrupting lists
which will trigger errors in reclaim or during page free such as in the
following oops

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffff810f795c>] free_pcppages_bulk+0xcc/0x450
  PGD 1dda554067 PUD 1e1cb58067 PMD 0
  Oops: 0000 [#1] SMP
  CPU 37
  Pid: 17088, comm: memcg_process_s Tainted: G            X
  RIP: free_pcppages_bulk+0xcc/0x450
  Process memcg_process_s (pid: 17088, threadinfo ffff881c2926e000, task ffff881c2926c0c0)
  Call Trace:
    free_hot_cold_page+0x17e/0x1f0
    __pagevec_free+0x90/0xb0
    release_pages+0x22a/0x260
    pagevec_lru_move_fn+0xf3/0x110
    putback_lru_page+0x66/0xe0
    unmap_and_move+0x156/0x180
    migrate_pages+0x9e/0x1b0
    compact_zone+0x1f3/0x2f0
    compact_zone_order+0xa2/0xe0
    try_to_compact_pages+0xdf/0x110
    __alloc_pages_direct_compact+0xee/0x1c0
    __alloc_pages_slowpath+0x370/0x830
    __alloc_pages_nodemask+0x1b1/0x1c0
    alloc_pages_vma+0x9b/0x160
    do_huge_pmd_anonymous_page+0x160/0x270
    do_page_fault+0x207/0x4c0
    page_fault+0x25/0x30

The "X" in the taint flag means that external modules were loaded but but
is unrelated to the bug triggering.  The real problem was because the PFN
layout looks like this

  Zone PFN ranges:
    DMA      0x00000010 -> 0x00001000
    DMA32    0x00001000 -> 0x00100000
    Normal   0x00100000 -> 0x01e80000
  Movable zone start PFN for each node
  early_node_map[14] active PFN ranges
      0: 0x00000010 -> 0x0000009b
      0: 0x00000100 -> 0x0007a1ec
      0: 0x0007a354 -> 0x0007a379
      0: 0x0007f7ff -> 0x0007f800
      0: 0x00100000 -> 0x00680000
      1: 0x00680000 -> 0x00e80000
      0: 0x00e80000 -> 0x01080000
      1: 0x01080000 -> 0x01280000
      0: 0x01280000 -> 0x01480000
      1: 0x01480000 -> 0x01680000
      0: 0x01680000 -> 0x01880000
      1: 0x01880000 -> 0x01a80000
      0: 0x01a80000 -> 0x01c80000
      1: 0x01c80000 -> 0x01e80000

The fix is straight-forward.  isolate_migratepages() has to make a
similar check to isolate_freepage to ensure that it never isolates pages
from a zone it does not hold the LRU lock for.

This was discovered in a 3.0-based kernel but it affects 3.1.x, 3.2.x
and current mainline.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agonilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()
Xi Wang [Thu, 9 Feb 2012 01:13:37 +0000]
nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()

nsegs is read from userspace.  Limit its value and avoid overflowing nsegs
* sizeof(__u64) in the subsequent call to memdup_user().

This patch complements 481fe17e973fb9 ("nilfs2: potential integer overflow
in nilfs_ioctl_clean_segments()").

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: Haogang Chen <haogangchen@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agostaging: pohmelfs: remove drivers/staging/pohmelfs
Evgeniy Polyakov [Wed, 8 Feb 2012 23:44:50 +0000]
staging: pohmelfs: remove drivers/staging/pohmelfs

New pohmelfs is coming, and it is time to remove deadly old design
https://lkml.org/lkml/2012/2/8/293

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Thu, 9 Feb 2012 00:12:12 +0000]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless

7 years agogro: more generic L2 header check
Eric Dumazet [Wed, 8 Feb 2012 08:51:50 +0000]
gro: more generic L2 header check

Shlomo Pongratz reported GRO L2 header check was suited for Ethernet
only, and failed on IB/ipoib traffic.

He provided a patch faking a zeroed header to let GRO aggregates frames.

Roland Dreier, Herbert Xu, and others suggested we change GRO L2 header
check to be more generic, ie not assuming L2 header is 14 bytes, but
taking into account hard_header_len.

__napi_gro_receive() has special handling for the common case (Ethernet)
to avoid a memcmp() call and use an inline optimized function instead.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Shlomo Pongratz <shlomop@mellanox.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoIPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses
Roland Dreier [Tue, 7 Feb 2012 14:51:21 +0000]
IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses

Commit a0417fa3a18a ("net: Make qdisc_skb_cb upper size bound
explicit.") made it possible for a netdev driver to use skb->cb
between its header_ops.create method and its .ndo_start_xmit
method.  Use this in ipoib_hard_header() to stash away the LL address
(GID + QPN), instead of the "ipoib_pseudoheader" hack.  This allows
IPoIB to stop lying about its hard_header_len, which will let us fix
the L2 check for GRO.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agodriver-core: cpu: fix kobject warning when hotplugging a cpu
Greg Kroah-Hartman [Wed, 8 Feb 2012 23:11:17 +0000]
driver-core: cpu: fix kobject warning when hotplugging a cpu

Due to the sysdev conversion to struct device, the cpu objects get
reused when adding a cpu after offlining it, which causes a big warning
that the kobject portion is not properly initialized.

So clear out the object before we register it again, so all is quiet.

Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoACPI: remove duplicated lines of merging problems with acpi_processor_add
Yinghai Lu [Tue, 7 Feb 2012 16:20:37 +0000]
ACPI: remove duplicated lines of merging problems with acpi_processor_add

Those lines have two copies.

Not sure how it could happen, looks like git problem.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agom32r: relocate drivers back out of 8250 dir
Paul Gortmaker [Wed, 8 Feb 2012 14:05:42 +0000]
m32r: relocate drivers back out of 8250 dir

Commit 9bef3d4197379a995fa80f81950bbbf8d32e9e8b

"serial: group all the 8250 related code together"

inadvertently swept up the m32r driver in the move, because
it had comments mentioning 8250 registers within it.  However
these are only there by nature of the driver being based off
the 8250 source code -- the hardware itself does not actually
have any relation to the original 8250 style UARTs.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoMerge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Wed, 8 Feb 2012 22:56:39 +0000]
Merge tag 'sound-fixes' of git://git./linux/kernel/git/tiwai/sound

sound fixes #2 for 3.3-rc3

A collection of small fixes, mostly for regressions.
In addition, a few ASoC wm8994 updates are included, too.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Disable line output discharge prior to ramping VMID
  ASoC: wm8994: Fix typo in VMID ramp setting
  ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs
  ALSA: usb-audio: add Edirol UM-3G support
  ALSA: hda - add support for Uniwill ECS M31EI notebook
  ALSA: hda - Fix error handling in patch_ca0132.c
  ASoC: wm8994: Enabling VMID should take a runtime PM reference
  ALSA: hda/realtek - Fix a wrong condition
  ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.c
  ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slaves
  ASoC: wm_hubs: Correct line input to line output 2 paths
  ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master mode
  ASoC: wm8962: Fix word length configuration
  ASoC: core: Better support for idle_bias_off suspend ignores
  ASoC: wm8994: Remove ASoC level register cache sync
  ASoC: wm_hubs: Fix routing of input PGAs to line output mixer

7 years agostaging: android/ram_console: Don't build on arches w/o ioremap
Anton Vorontsov [Tue, 7 Feb 2012 05:13:27 +0000]
staging: android/ram_console: Don't build on arches w/o ioremap

This patch fixes UML build:

CC drivers/staging/android/ram_console.o
  drivers/staging/android/ram_console.c: In function
  'ram_console_driver_probe':
  drivers/staging/android/ram_console.c:358:2: error: implicit declaration
  of function 'ioremap' [-Werror=implicit-function-declaration]
  cc1: some warnings being treated as errors
  make[3]: *** [drivers/staging/android/ram_console.o] Error 1

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: r8712u: Use asynchronous firmware loading
Larry Finger [Mon, 6 Feb 2012 03:12:26 +0000]
staging: r8712u: Use asynchronous firmware loading

In https://bugs.archlinux.org/task/27996, failure of driver r8712u is
reported, with a timeout during module loading due to synchronous loading
of the firmware. The code now uses request_firmware_nowait().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: usbip: fix to prevent potentially using uninitialized spinlock
Bart Westgeest [Wed, 25 Jan 2012 18:46:32 +0000]
staging: usbip: fix to prevent potentially using uninitialized spinlock

The stub_probe function can be called as soon as the stub_driver is
registered. This can lead to the busid_table_lock being used before it
is initialized. Moved calling the init_busid_table function (which
initalizes this spinlock) to be called earlier in the init function to
prevent this from happening.

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: r8712u: Fix problem when CONFIG_R8712_AP is set
Larry Finger [Fri, 3 Feb 2012 22:05:13 +0000]
staging: r8712u: Fix problem when CONFIG_R8712_AP is set

When this driver was upgraded to the vendor 20100831 version in
commit 93c55dda092c7 et al,, one listhead initialization was missed.
This broke complete operation of the driver whenever AP mode was
enabled.

This patch fixes https://bugs.archlinux.org/task/27996.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.stable.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: tidspbridge: fix incorrect free to drv_datap
Omar Ramirez Luna [Tue, 31 Jan 2012 01:20:18 +0000]
staging: tidspbridge: fix incorrect free to drv_datap

This structure is still used after it has been freed, since it
is being allocated in probe, calls to free it have been moved to
module's remove routine.

This should fix the follwoing messages when attempting to remove the
module:
 drv_get_first_dev_extension: Failed to retrieve the object handle
 drv_get_first_dev_extension: Failed to retrieve the object handle
 drv_destroy: Failed to store DRV object
 mgr_destroy: Failed to store MGR object

Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: tidspbridge: fix bridge_open memory leaks
Omar Ramirez Luna [Tue, 31 Jan 2012 01:20:17 +0000]
staging: tidspbridge: fix bridge_open memory leaks

There are two members of pr_ctxt allocated during bridge_open that
are never freed resulting in memory leaks, these are stream_id and
node_id, they are now freed on release of the handle (bridge_release)
right before freeing pr_ctxt.

Error path for bridge_open was also fixed since the same variables
could result in memory leaking due to missing handling of failure
scenarios. While at it, the indentation changes were introduced to
avoid interleaved goto statements inside big if blocks.

Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: android: lowmemorykiller: Don't wait more than one second for a process...
Arve Hjønnevåg [Fri, 13 Jan 2012 18:21:25 +0000]
staging: android: lowmemorykiller: Don't wait more than one second for a process to die

If a process forked and the child process was killed by the
lowmemorykiller, the lowmemory killer would be disabled until
the parent process reaped the child or it died itself.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoMAINTAINERS: staging: iio: add iio information
Ameya Palande [Tue, 10 Jan 2012 17:00:58 +0000]
MAINTAINERS: staging: iio: add iio information

Signed-off-by: Ameya Palande <ameya.palande@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: zcache: fix serialization bug in zv stats
Seth Jennings [Fri, 30 Dec 2011 16:42:15 +0000]
staging: zcache: fix serialization bug in zv stats

In a multithreaded workload, the zv_curr_dist_counts
and zv_cumul_dist_counts statistics are being corrupted
because the increments and decrements in zv_create
and zv_free are not atomic.

This patch converts these statistics and their corresponding
increments/decrements/reads to atomic operations.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agostaging: fix go7007-usb license
Randy Dunlap [Thu, 2 Feb 2012 03:04:02 +0000]
staging: fix go7007-usb license

Add MODULE_LICENSE() for this source module to fix build warning:

WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/media/go7007/go7007-usb.o
see include/linux/module.h for more information

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Ross Cohen <rcohen@snurgle.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoStaging: android: binder: Fix crashes when sharing a binder file between processes
Arve Hjønnevåg [Wed, 1 Feb 2012 23:29:13 +0000]
Staging: android: binder: Fix crashes when sharing a binder file between processes

Opening the binder driver and sharing the file returned with
other processes (e.g. by calling fork) can crash the kernel.
Prevent these crashes with the following changes:
- Add a mutex to protect against two processes mmapping the
  same binder_proc.
- After locking mmap_sem, check that the vma we want to access
  (still) points to the same mm_struct.
- Use proc->tsk instead of current to get the files struct since
  this is where we get the rlimit from.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 years agoStaging: android: Remove pmem driver
Shuah Khan [Fri, 27 Jan 2012 18:40:10 +0000]
Staging: android: Remove pmem driver

Addroid pmem driver is no longer used in any of the Android products.
This patch removes pmem driver from Android staging area

Reference: https://lkml.org/lkml/2012/1/23/183

Signed-off-by: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoStaging: asus_oled: fix NULL-ptr crash on unloading
Pekka Paalanen [Sun, 22 Jan 2012 14:33:47 +0000]
Staging: asus_oled: fix NULL-ptr crash on unloading

Asus_oled triggers the following bug on module unloading:

 usbcore: deregistering interface driver asus-oled
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
 IP: [<ffffffff8111292b>] sysfs_delete_link+0x30/0x66

 Call Trace:
  [<ffffffff81225373>] device_remove_class_symlinks+0x6b/0x70
  [<ffffffff812256a8>] device_del+0x9f/0x1ab
  [<ffffffff812257c5>] device_unregister+0x11/0x1e
  [<ffffffffa000cb82>] asus_oled_disconnect+0x4f/0x9e [asus_oled]
  [<ffffffff81277430>] usb_unbind_interface+0x54/0x103
  [<ffffffff812276c4>] __device_release_driver+0xa2/0xeb
  [<ffffffff81227794>] driver_detach+0x87/0xad
  [<ffffffff812269e9>] bus_remove_driver+0x91/0xc1
  [<ffffffff81227fb4>] driver_unregister+0x66/0x6e
  [<ffffffff812771ed>] usb_deregister+0xbb/0xc4
  [<ffffffffa000ce87>] asus_oled_exit+0x2f/0x31 [asus_oled]
  [<ffffffff81068365>] sys_delete_module+0x1b8/0x21b
  [<ffffffff810ae3de>] ? do_munmap+0x2ef/0x313
  [<ffffffff813699bb>] system_call_fastpath+0x16/0x1b

This is due to an incorrect destruction sequence in asus_oled_exit().

Fix the order, fixes the bug. Tested on an Asus G50V laptop only.

Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoStaging: asus_oled: fix image processing
Pekka Paalanen [Sun, 22 Jan 2012 14:33:46 +0000]
Staging: asus_oled: fix image processing

Programming an image was broken, because odev->buf_offs was not advanced
for val == 0 in append_values(). This regression was introduced in:

 commit 1ff12a4aa354bed093a0240d5e6347b1e27601bc
 Author: Kevin A. Granade <kevin.granade@gmail.com>
 Date:   Sat Sep 5 01:03:39 2009 -0500

     Staging: asus_oled: Cleaned up checkpatch issues.

Fix the image processing by special-casing val == 0.

I have tested this change on an Asus G50V laptop only.

Cc: Jakub Schmidtke <sjakub@gmail.com>
Cc: Kevin A. Granade <kevin.granade@gmail.com>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoStaging: android: binder: Don't call dump_stack in binder_vma_open
Arve Hjønnevåg [Sat, 21 Jan 2012 03:56:21 +0000]
Staging: android: binder: Don't call dump_stack in binder_vma_open

If user-space partially unmaps the driver, binder_vma_open
would dump the kernel stack. This is not a kernel bug however
and will be treated as if the whole area was unmapped once
binder_vma_close gets called.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: r8712u: Add new Sitecom UsB ID
Larry Finger [Sat, 7 Jan 2012 16:07:03 +0000]
staging: r8712u: Add new Sitecom UsB ID

Add USB ID for SITECOM WLA-1000 V1 001 WLAN

Reported-and-tested-by: Roland Gruber <post@rolandgruber.de>
Reported-and-tested-by: Dario Lucia <dario.lucia@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agozcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention.
Dan Magenheimer [Mon, 23 Jan 2012 21:52:20 +0000]
zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention.

SWIZ_BITS > 8 results in a much larger number of "tmem_obj"
allocations, likely one per page-placed-in-frontswap.  The
tmem_obj is not huge (roughly 100 bytes), but it is large
enough to add a not-insignificant memory overhead to zcache.

The SWIZ_BITS=8  will get roughly the same lock contention
without the space wastage.

The effect of SWIZ_BITS can be thought of as "2^SWIZ_BITS is
the number of unique oids that be generated" (This concept is
limited to frontswap's use of tmem).

Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agozcache: fix deadlock condition
Dan Magenheimer [Wed, 25 Jan 2012 22:32:51 +0000]
zcache: fix deadlock condition

I discovered this deadlock condition awhile ago working on RAMster
but it affects zcache as well.  The list spinlock must be
locked prior to the page spinlock and released after.  As
a result, the page copy must also be done while the locks are held.

Applies to 3.2.  Konrad, please push (via GregKH?)...
this is definitely a bug fix so need not be pushed during
a -rc0 window.

Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: drm/omap: fix locking issue
Rob Clark [Thu, 19 Jan 2012 00:33:02 +0000]
staging: drm/omap: fix locking issue

The create/free mmap offset code must be synchronized.  Yet only some
callers of omap_gem_mmap_offset() held struct_mutex.  Leading to various
crashes around drm_mm_insert_helper_range().  (In the free-object path,
which is currently the only place we drm_gem_free_mmap_offset(),
struct_mutex is already held.)

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/staging/omapdrm/omap_fbdev.c: move free after uses
Julia Lawall [Mon, 9 Jan 2012 07:51:03 +0000]
drivers/staging/omapdrm/omap_fbdev.c: move free after uses

Move the free after the final uses.

The semantic patch that makes this report is available
in scripts/coccinelle/free/kfree.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: drm/omap: fix minimum width/height
Rob Clark [Mon, 9 Jan 2012 01:37:37 +0000]
staging: drm/omap: fix minimum width/height

Fix minimum width/height so planes could be used to implement
hw mouse cursor.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: drm/omap: updates for DSS fifomerge API changes
Rob Clark [Mon, 16 Jan 2012 18:51:18 +0000]
staging: drm/omap: updates for DSS fifomerge API changes

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: drm/omap: multiplanar and YUV support
Rob Clark [Mon, 16 Jan 2012 18:51:17 +0000]
staging: drm/omap: multiplanar and YUV support

Add support in framebuffer objects for other color formats and multi-
planar YUV (NV12).  Since this requires changing the API between the
plane and fb for getting scanout information (paddr, etc), take
advantage of the opportunity and put in place a way to allow fb's to
be unpinned when they are not being scanned out.  Now, before start
of scanout the plane calls omap_framebuffer_pin() which takes care
to pin all the backing bo's, then omap_framebuffer_update_scanout()
however many times to update the scanout address(es), etc, and then
when finished omap_framebuffer_unpin().

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: drm/omap: add drm_plane support
Rob Clark [Mon, 16 Jan 2012 18:51:16 +0000]
staging: drm/omap: add drm_plane support

Because framebuffer layer and overlay scanout video pipes are basically
thing in OMAP display subsystem (the only difference being that the first
video pipe does not support scaling or YUV formats), much of the CRTC
code is pulled into the plane implementation, and a private plane object
is used by the CRTC object.  This avoids code duplication between the
plane and CRTC.

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: drm/omap: drm API update: addfb2
Rob Clark [Mon, 16 Jan 2012 18:51:15 +0000]
staging: drm/omap: drm API update: addfb2

Update to reflect changes in:
"drm: add an fb creation ioctl that takes a pixel format v5"

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: drm/omap: drm API update: make fops struct const
Rob Clark [Mon, 16 Jan 2012 18:51:14 +0000]
staging: drm/omap: drm API update: make fops struct const

Update to reflect changes in:
"Make the per-driver file_operations struct const"

Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: delete gma500 driver
Greg Kroah-Hartman [Mon, 30 Jan 2012 22:12:59 +0000]
staging: delete gma500 driver

It's now "properly" merged into the DRM tree in the kernel, so delete
the staging version of the driver as it is far obsolete and broken.

Requested-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2)
Keith Packard [Wed, 8 Feb 2012 21:53:38 +0000]
drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2)

An identical patch has been merged for i9xx_crtc_mode_set:

Commit 59df7b1771c150163e522f33c638096ab0efbf42
Author: Christian Schmidt <schmidt@digadd.de>
Date:   Mon Dec 19 20:03:33 2011 +0100

    drm/intel: Fix initialization if startup happens in interlaced mode [v2]

But that one neglected to fix up the ironlake+ path.

This should fix the issue reported by Alfonso Fiore where booting with
only a HDMI cable connected to his TV failed to display anything. The
issue is that the bios set up things for 1080i and used the pannel
fitter to scale up the lower progressive resolutions. We failed to
clear the interlace bit in the PIPEACONF register, resulting in havoc.

v2: Be more paranoid and just unconditionally clear the field before
setting new values.

Cc: Peter Ross <pross@xvid.org>
Cc: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Keith Packard <keithp@keithp.com>

7 years agoloop: zero fill bio instead of return -EIO for partial read
Dave Young [Wed, 8 Feb 2012 21:07:19 +0000]
loop: zero fill bio instead of return -EIO for partial read

commit 8268f5a741 ("deny partial write for loop dev fd") tried to fix the
loop device partial read information leak problem.  But it changed the
semantics of read behavior.  When we read beyond the end of the device we
should get 0 bytes, which is normal behavior, we should not just return
-EIO

Instead of returning -EIO, zero out the bio to avoid information leak in
case of partail read.

Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Dmitry Monakhov <dmonakhov@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agobio: don't overflow in bio_get_nr_vecs()
Kent Overstreet [Wed, 8 Feb 2012 21:07:18 +0000]
bio: don't overflow in bio_get_nr_vecs()

There were two places bio_get_nr_vecs() could overflow:

First, it did a left shift to convert from sectors to bytes immediately
before dividing by PAGE_SIZE.  If PAGE_SIZE ever was less than 512 a great
many things would break, so dividing by PAGE_SIZE >> 9 is safe and will
generate smaller code too.

The nastier overflow was in the DIV_ROUND_UP() (that's what the code was
effectively doing, anyways).  If n + d overflowed, the whole thing would
return 0 which breaks things rather effectively.

bio_get_nr_vecs() doesn't claim to give an exact value anyways, so the
DIV_ROUND_UP() is silly; we could do a straight divide except if a
device's queue_max_sectors was less than PAGE_SIZE we'd return 0.  So we
just add 1; this should always be safe - things will break badly if
bio_get_nr_vecs() returns > BIO_MAX_PAGES (bio_alloc() will suddenly start
failing) but it's queue_max_segments that must guard against this, if
queue_max_sectors is preventing this from happen things are going to
explode on architectures with different PAGE_SIZE.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agoMerge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Wed, 8 Feb 2012 20:29:38 +0000]
Merge tag 'asoc-3.3' of git://git./linux/kernel/git/broonie/sound into for-linus

A few small WM8994 updates to go on top of the previous lot of things
that were sent.  They collide with some -next work so I'd really like to
get them into 3.3-rc3 if possible to merge back up into the -next code.
All driver specific and unexciting in the grand scheme of things.

7 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 8 Feb 2012 19:53:43 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

7 years agoASoC: wm8994: Disable line output discharge prior to ramping VMID
Mark Brown [Tue, 7 Feb 2012 14:18:29 +0000]
ASoC: wm8994: Disable line output discharge prior to ramping VMID

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

7 years agoASoC: wm8994: Fix typo in VMID ramp setting
Mark Brown [Tue, 7 Feb 2012 17:24:19 +0000]
ASoC: wm8994: Fix typo in VMID ramp setting

The VMID ramp rate is supposed to be 0x3, not 11b. Fix that.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

7 years agofloppy: Fix a crash during rmmod
Vivek Goyal [Wed, 8 Feb 2012 19:03:39 +0000]
floppy: Fix a crash during rmmod

floppy driver does not call add_disk() on all the drives hence we don't take
gendisk reference on request queue for these drives. Don't call put_disk()
with disk->queue set, otherwise we try to put the reference we never took.

Reported-and-tested-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de>
Signed-off-by: Vivek Goyal<vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agofloppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called
Vivek Goyal [Wed, 8 Feb 2012 19:03:38 +0000]
floppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called

add_disk() takes gendisk reference on request queue. If driver failed during
initialization and never called add_disk() then that extra reference is not
taken. That reference is put in put_disk(). floppy driver allocates the
disk, allocates queue, sets disk->queue and then relizes that floppy
controller is not present. It tries to tear down everything and tries to
put a reference down in put_disk() which was never taken.

In such error cases cleanup disk->queue before calling put_disk() so that
we never try to put down a reference which was never taken in first place.

Reported-and-tested-by: Suresh Jayaraman <sjayaraman@suse.com>
Tested-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agocdrom: move shared static to cdrom_device_info
Paolo Bonzini [Wed, 8 Feb 2012 19:03:14 +0000]
cdrom: move shared static to cdrom_device_info

The keeplocked variable in the cdrom driver is shared across multiple
drives, but set in per-device ioctls.  Move it to the per-device struct,
avoiding that the setting on one drive affects the driver's behavior
when closing another.

[ Impact: limit udev's confusion to one drive when a CD burning program
  unlocks the CD door at the end of burning. ]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agobsg: fix sysfs link remove warning
Stanislaw Gruszka [Wed, 8 Feb 2012 19:02:03 +0000]
bsg: fix sysfs link remove warning

We create "bsg" link if q->kobj.sd is not NULL, so remove it only
when the same condition is true.

Fixes:

WARNING: at fs/sysfs/inode.c:323 sysfs_hash_and_remove+0x2b/0x77()
sysfs: can not remove 'bsg', no directory
Call Trace:
  [<c0429683>] warn_slowpath_common+0x6a/0x7f
  [<c0537a68>] ? sysfs_hash_and_remove+0x2b/0x77
  [<c042970b>] warn_slowpath_fmt+0x2b/0x2f
  [<c0537a68>] sysfs_hash_and_remove+0x2b/0x77
  [<c053969a>] sysfs_remove_link+0x20/0x23
  [<c05d88f1>] bsg_unregister_queue+0x40/0x6d
  [<c0692263>] __scsi_remove_device+0x31/0x9d
  [<c069149f>] scsi_forget_host+0x41/0x52
  [<c0689fa9>] scsi_remove_host+0x71/0xe0
  [<f7de5945>] quiesce_and_remove_host+0x51/0x83 [usb_storage]
  [<f7de5a1e>] usb_stor_disconnect+0x18/0x22 [usb_storage]
  [<c06c29de>] usb_unbind_interface+0x4e/0x109
  [<c067a80f>] __device_release_driver+0x6b/0xa6
  [<c067a861>] device_release_driver+0x17/0x22
  [<c067a46a>] bus_remove_device+0xd6/0xe6
  [<c06785e2>] device_del+0xf2/0x137
  [<c06c101f>] usb_disable_device+0x94/0x1a0

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agodrm/i915: no lvds quirk for AOpen MP45
Daniel Vetter [Wed, 8 Feb 2012 15:42:52 +0000]
drm/i915: no lvds quirk for AOpen MP45

According to a bug report, it doesn't have one.

Cc: stable@kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44263
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Keith Packard <keithp@keithp.com>

7 years agoALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs
Clemens Ladisch [Sat, 4 Feb 2012 19:56:47 +0000]
ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs

The driver accidentally exchanged the left/right fields for stereo AC'97
mixer registers.  This affected only the aux and CD inputs because the
line input bypasses the AC'97 codec and the mic input is mono; cards
without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected.

Reported-and-tested-by: Abby Cedar <abbycedar@yahoo.com.au>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: 2.6.31+ <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoALSA: usb-audio: add Edirol UM-3G support
Clemens Ladisch [Sat, 4 Feb 2012 19:51:43 +0000]
ALSA: usb-audio: add Edirol UM-3G support

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoblock: don't call elevator callbacks for plug merges
Tejun Heo [Wed, 8 Feb 2012 08:19:42 +0000]
block: don't call elevator callbacks for plug merges

Plug merge calls two elevator callbacks outside queue lock -
elevator_allow_merge_fn() and elevator_bio_merged_fn().  Although
attempt_plug_merge() suggests that elevator is guaranteed to be there
through the existing request on the plug list, nothing prevents plug
merge from calling into dying or initializing elevator.

For regular merges, bypass ensures elvpriv count to reach zero, which
in turn prevents merges as all !ELVPRIV requests get REQ_SOFTBARRIER
from forced back insertion.  Plug merge doesn't check ELVPRIV, and, as
the requests haven't gone through elevator insertion yet, it doesn't
have SOFTBARRIER set allowing merges on a bypassed queue.

This, for example, leads to the following crash during elevator
switch.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
 IP: [<ffffffff813b34e9>] cfq_allow_merge+0x49/0xa0
 PGD 112cbc067 PUD 115d5c067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP
 CPU 1
 Modules linked in: deadline_iosched

 Pid: 819, comm: dd Not tainted 3.3.0-rc2-work+ #76 Bochs Bochs
 RIP: 0010:[<ffffffff813b34e9>]  [<ffffffff813b34e9>] cfq_allow_merge+0x49/0xa0
 RSP: 0018:ffff8801143a38f8  EFLAGS: 00010297
 RAX: 0000000000000000 RBX: ffff88011817ce28 RCX: ffff880116eb6cc0
 RDX: 0000000000000000 RSI: ffff880118056e20 RDI: ffff8801199512f8
 RBP: ffff8801143a3908 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880118195708
 R13: ffff880118052aa0 R14: ffff8801143a3d50 R15: ffff880118195708
 FS:  00007f19f82cb700(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000008 CR3: 0000000112c6a000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process dd (pid: 819, threadinfo ffff8801143a2000, task ffff880116eb6cc0)
 Stack:
  ffff88011817ce28 ffff880118195708 ffff8801143a3928 ffffffff81391bba
  ffff88011817ce28 ffff880118195708 ffff8801143a3948 ffffffff81391bf1
  ffff88011817ce28 0000000000000000 ffff8801143a39a8 ffffffff81398e3e
 Call Trace:
  [<ffffffff81391bba>] elv_rq_merge_ok+0x4a/0x60
  [<ffffffff81391bf1>] elv_try_merge+0x21/0x40
  [<ffffffff81398e3e>] blk_queue_bio+0x8e/0x390
  [<ffffffff81396a5a>] generic_make_request+0xca/0x100
  [<ffffffff81396b04>] submit_bio+0x74/0x100
  [<ffffffff811d45c2>] __blockdev_direct_IO+0x1ce2/0x3450
  [<ffffffff811d0dc7>] blkdev_direct_IO+0x57/0x60
  [<ffffffff811460b5>] generic_file_aio_read+0x6d5/0x760
  [<ffffffff811986b2>] do_sync_read+0xe2/0x120
  [<ffffffff81199345>] vfs_read+0xc5/0x180
  [<ffffffff81199501>] sys_read+0x51/0x90
  [<ffffffff81aeac12>] system_call_fastpath+0x16/0x1b

There are multiple ways to fix this including making plug merge check
ELVPRIV; however,

* Calling into elevator outside queue lock is confusing and
  error-prone.

* Requests on plug list aren't known to the elevator.  They aren't on
  the elevator yet, so there's no elevator specific state to update.

* Given the nature of plug merges - collecting bio's for the same
  purpose from the same issuer - elevator specific restrictions aren't
  applicable.

So, simply don't call into elevator methods from plug merge by moving
elv_bio_merged() from bio_attempt_*_merge() to blk_queue_bio(), and
using blk_try_merge() in attempt_plug_merge().

This is based on Jens' patch to skip elevator_allow_merge_fn() from
plug merge.

Note that this makes per-cgroup merged stats skip plug merging.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4F16F3CA.90904@kernel.dk>
Original-patch-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agoblock: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions
Tejun Heo [Wed, 8 Feb 2012 08:19:38 +0000]
block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions

blk_rq_merge_ok() is the elevator-neutral part of merge eligibility
test.  blk_try_merge() determines merge direction and expects the
caller to have tested elv_rq_merge_ok() previously.

elv_rq_merge_ok() now wraps blk_rq_merge_ok() and then calls
elv_iosched_allow_merge().  elv_try_merge() is removed and the two
callers are updated to call elv_rq_merge_ok() explicitly followed by
blk_try_merge().  While at it, make rq_merge_ok() functions return
bool.

This is to prepare for plug merge update and doesn't introduce any
behavior change.

This is based on Jens' patch to skip elevator_allow_merge_fn() from
plug merge.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4F16F3CA.90904@kernel.dk>
Original-patch-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agocifs: don't return error from standard_receive3 after marking response malformed
Jeff Layton [Tue, 7 Feb 2012 11:31:05 +0000]
cifs: don't return error from standard_receive3 after marking response malformed

standard_receive3 will check the validity of the response from the
server (via checkSMB). It'll pass the result of that check to handle_mid
which will dequeue it and mark it with a status of
MID_RESPONSE_MALFORMED if checkSMB returned an error. At that point,
standard_receive3 will also return an error, which will make the
demultiplex thread skip doing the callback for the mid.

This is wrong -- if we were able to identify the request and the
response is marked malformed, then we want the demultiplex thread to do
the callback. Fix this by making standard_receive3 return 0 in this
situation.

Cc: stable@vger.kernel.org
Reported-and-Tested-by: Mark Moseley <moseleymark@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

7 years agocifs: request oplock when doing open on lookup
Jeff Layton [Tue, 7 Feb 2012 11:30:52 +0000]
cifs: request oplock when doing open on lookup

Currently, it's always set to 0 (no oplock requested).

Cc: <stable@vger.kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

7 years agocifs: fix error handling when cifscreds key payload is an error
Jeff Layton [Tue, 7 Feb 2012 11:30:51 +0000]
cifs: fix error handling when cifscreds key payload is an error

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

7 years agoMerge tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6
Linus Torvalds [Tue, 7 Feb 2012 23:54:02 +0000]
Merge tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6

fbdev fixes for 3.3

It includes:
 - compile fix for fsl-diu-fb
 - fix for a suspend/resume issue in atmel_lcdfb
 - fix for a suspend/resume issue in OMAP
 - workaround for a hardware bug to avoid physical damage in OMAP
 - really trivial dead code removal in intelfb

* tag 'fbdev-fixes-for-3.3-1' of git://github.com/schandinat/linux-2.6:
  atmel_lcdfb: fix usage of CONTRAST_CTR in suspend/resume
  intelfb: remove some dead code
  drivers/video: compile fixes for fsl-diu-fb.c
  OMAPDSS: HDMI: PHY burnout fix
  OMAP: 4430SDP/Panda: add HDMI HPD gpio
  OMAP: 4430SDP/Panda: setup HDMI GPIO muxes
  OMAPDSS: remove wrong HDMI HPD muxing
  OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD
  OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios
  OMAPDSS: use sync versions of pm_runtime_put

7 years agocheckpatch: Warn on code with 6+ tab indentation
Joe Perches [Fri, 3 Feb 2012 23:20:39 +0000]
checkpatch: Warn on code with 6+ tab indentation

Overly indented code should be refactored.

Suggest refactoring excessive indentation of of
if/else/for/do/while/switch statements.

For example:

$ cat t.c
#include <stdio.h>
#include <stdlib.h>

int main(int argc, char **argv)
{

if (1)
if (2)
if (3)
if (4)
if (5)
if (6)
if (7)
if (8)
;
return 0;
}

$ ./scripts/checkpatch.pl -f t.c
WARNING: Too many leading tabs - consider code refactoring
#12: FILE: t.c:12:
+ if (6)

WARNING: Too many leading tabs - consider code refactoring
#13: FILE: t.c:13:
+ if (7)

WARNING: Too many leading tabs - consider code refactoring
#14: FILE: t.c:14:
+ if (8)

total: 0 errors, 3 warnings, 17 lines checked

t.c has style problems, please review.

If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge tag 'ib-srpt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Tue, 7 Feb 2012 22:35:19 +0000]
Merge tag 'ib-srpt-fixes' of git://git./linux/kernel/git/roland/infiniband

Cleanups and error path fixes for the new SRP (SCSI RDMA protocol) target.

* tag 'ib-srpt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/srpt: Don't return freed pointer from srpt_alloc_ioctx_ring()
  IB/srpt: Fix ERR_PTR() vs. NULL checking confusion
  IB/srpt: Remove unneeded <linux/version.h> include
  IB/srpt: Use ARRAY_SIZE() instead of open-coding
  IB/srpt: Use DEFINE_SPINLOCK()/LIST_HEAD()

7 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Tue, 7 Feb 2012 22:32:24 +0000]
Merge tag 'for-linus' of git://git./linux/kernel/git/mst/vhost

arch: fix ioport mapping on mips,sh

Kevin Cernekee reported that recent cleanup that replaced pci_iomap with
a generic function failed to take into account the differences in io
port handling on mips and sh architectures.

Rather than revert the changes reintroducing the code duplication, this
patchset fixes this by adding ability for architectures to override
ioport mapping for pci devices.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  sh: use the the PCI channels's io_map_base
  mips: use the the PCI controller's io_map_base
  lib: add NO_GENERIC_PCI_IOPORT_MAP

7 years agoACPI: remove duplicated lines of merging problems with acpi_processor_add
Yinghai Lu [Tue, 7 Feb 2012 16:20:37 +0000]
ACPI: remove duplicated lines of merging problems with acpi_processor_add

Those lines have two copies.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Tue, 7 Feb 2012 22:07:20 +0000]
Merge git://git.samba.org/sfrench/cifs-2.6

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix oops in session setup code for null user mounts
  [CIFS] Update cifs Kconfig title to match removal of experimental dependency
  cifs: fix printk format warnings
  cifs: check offset in decode_ntlmssp_challenge()
  cifs: NULL dereference on allocation failure

7 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Tue, 7 Feb 2012 22:06:11 +0000]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/jikos/hid

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wiimote: fix invalid power_supply_powers call
  HID: wacom: Fix invalid power_supply_powers calls
  HID: hyperv: Properly disconnect the input device
  HID: usbhid: fix dead lock between open and disconect

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Tue, 7 Feb 2012 22:05:49 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Avoid twl6040-codec PLL reconfiguration when not needed
  mfd: Store twl6040-codec mclk configuration

7 years agozd1211rw: firmware needs duration_id set to zero for non-pspoll frames
Tomas Vanek [Sun, 5 Feb 2012 13:51:53 +0000]
zd1211rw: firmware needs duration_id set to zero for non-pspoll frames

Some devices (iwl5100) cannot connect to zd1211rw based AP. It appears that
zd1211 firmware messes up duration_id field if it is not set to zero by driver.

Sniffing traffic shows that zd1211 is transmitting frames with duration_id bits
14 and 15 set and other bits appearing random. Setting duration_id at driver to
zero results zd1211 outputting sane duration_id. This means that firmware is
setting correct values itself and expects duration_id to be zero in first
place.

Looking at vendor driver shows that only PSPoll frames have duration_id set by
driver, for other frames duration_id left zero.

Original bug-report and attached patch at:
  http://sourceforge.net/mailarchive/message.php?msg_id=28759111

Reported-by: Tomas Vanek <Tomas.Vanek@fbl.cz>
[modified original patch from bug-report, added check for pspoll frame]
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agonet: enable TC35815 for MIPS again
Atsushi Nemoto [Mon, 6 Feb 2012 14:51:03 +0000]
net: enable TC35815 for MIPS again

8<----------------------------------------------------------------------
From: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Date: Wed, 16 Nov 2011 09:33:50 +0100
Subject: [PATCH] net: enable TC35815 for MIPS again

TX493[8,9] MIPS SoCs support 2 Ethernet channels of type TC35815
which are connected to the internal PCI controller.
And JMR3927 MIPS board has a TC35815 chip on board.
These dependencies were lost on movement to drivers/net/ethernet/toshiba.

Signed-off-by: Ralf Roesch <ralf.roesch@rw-gmbh.de>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
CC: stable@vger.kernel.org [3.2+]
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet: sh_eth: fix skb_over_panic happen
Yoshihiro Shimoda [Mon, 6 Feb 2012 23:55:15 +0000]
net: sh_eth: fix skb_over_panic happen

When this GETHER controller received a large frame (about 1800 bytes
or more), skb_over_panic() happened. This is because the previous
driver set the RFLR to 0x1000 (4096 bytes) and the skb allocate size
is smaller than 4096 bytes. So, the controller accepted such a frame.

The controller can discard a large frame by the RFLR setting.
So, the patch modifies the value of RFLR to mtu + ETH_HLEN +
VLAN_HLEN + ETH_FCS_LEN.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet: Fix build regression when INET_UDP_DIAG=y and IPV6=m
Anisse Astier [Tue, 7 Feb 2012 07:39:11 +0000]
net: Fix build regression when INET_UDP_DIAG=y and IPV6=m

Tested-by: Anisse Astier <anisse@astier.eu>

Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: Fix mem leak in bnx2x_tpa_stop() if build_skb() fails.
Jesper Juhl [Mon, 6 Feb 2012 11:28:21 +0000]
bnx2x: Fix mem leak in bnx2x_tpa_stop() if build_skb() fails.

We allocate memory for 'new_data' with kmalloc(). If we get the memory
we then try to build_skb() and if that should fail (which it can) we
do not enter 'if (likely(skb)) {' and actually use 'new_data' but
instead fall through to the 'drop:' label and end up returning from
the function without ever assigning 'new'data' to anything or freeing
it. That leaks the memory allocated to 'new_data'.

This patch fixes the memory leak by doing a kfree(new_data) in the
case where build_skb() fails (or where allocation of 'new_data' itself
fails, but in taht case it's just a harmless kfree(NULL)).

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoCONFIG_TR/CONFIG_LLC: work around the problem with select
Al Viro [Sat, 4 Feb 2012 20:31:39 +0000]
CONFIG_TR/CONFIG_LLC: work around the problem with select

As it is, with PCI/ISA/MCA/CCW all set to n and PCMCIA set to m
setting TR to y will set LLC to m, with very unpleasant results -
net/802/psnap gets picked into obj-y, resulting in the kernel
that won't link - psnap calls functions from llc.  The cause,
AFAICS, is that kconfig gets rev_dep for LLC containing
|| TR && (deps for TR)
and even though TR is boolean, both LLC and PCMCIA are tristate
and that thing becomes || y && (n || m), i.e. || m.  The reason
for dependency on PCMCIA is that when none of PCI, ISA, MCA, CCW
or PCMCIA is set there'll be no tokenring drivers, so there's no
point building tokenring core.  Proper fix probably belongs in
kconfig (we need strict and, such that y <strict_and> m would be
y, so that rev_deps added for tristate selected by bool would
use that instead of &&; we'd have || TR <strict_and> (deps for TR)
in this case), but it's a rather intrusive change.  There's an
easy workaround in case of TR -> LLC select, namely to have a def_bool y
symbol sitting under if TR and have that symbol selecting LLC.
Kudos to johill for suggesting that one...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoRevert "skge: check for PCI dma mapping errors"
stephen hemminger [Mon, 6 Feb 2012 15:04:23 +0000]
Revert "skge: check for PCI dma mapping errors"

As reported by several people...

The code in rx_clean was panic'ing so revert
commit d0249e44432aa0ffcf710b64449b8eaa3722547e.
Will redo DMA mapping checks as new patches for a later release.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoperf: Fix double start/stop in x86_pmu_start()
Stephane Eranian [Tue, 7 Feb 2012 13:39:57 +0000]
perf: Fix double start/stop in x86_pmu_start()

The following patch fixes a bug introduced by the following
commit:

        e050e3f0a71b ("perf: Fix broken interrupt rate throttling")

The patch caused the following warning to pop up depending on
the sampling frequency adjustments:

  ------------[ cut here ]------------
  WARNING: at arch/x86/kernel/cpu/perf_event.c:995 x86_pmu_start+0x79/0xd4()

It was caused by the following call sequence:

perf_adjust_freq_unthr_context.part() {
     stop()
     if (delta > 0) {
          perf_adjust_period() {
              if (period > 8*...) {
                  stop()
                  ...
                  start()
              }
          }
      }
      start()
}

Which caused a double start and a double stop, thus triggering
the assert in x86_pmu_start().

The patch fixes the problem by avoiding the double calls. We
pass a new argument to perf_adjust_period() to indicate whether
or not the event is already stopped. We can't just remove the
start/stop from that function because it's called from
__perf_event_overflow where the event needs to be reloaded via a
stop/start back-toback call.

The patch reintroduces the assertion in x86_pmu_start() which
was removed by commit:

84f2b9b ("perf: Remove deprecated WARN_ON_ONCE()")

In this second version, we've added calls to disable/enable PMU
during unthrottling or frequency adjustment based on bug report
of spurious NMI interrupts from Eric Dumazet.

Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: markus@trippelsdorf.de
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/20120207133956.GA4932@quad
[ Minor edits to the changelog and to the code ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

7 years agoALSA: hda - add support for Uniwill ECS M31EI notebook
Jaroslav Kysela [Tue, 7 Feb 2012 13:18:14 +0000]
ALSA: hda - add support for Uniwill ECS M31EI notebook

This hardware requires same fixup for the node 0x0f like Asus A6Rp.
More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>