8 years agostmmac: priv->lock can be used uninitialized
Vlad Lungu [Mon, 29 Nov 2010 22:52:52 +0000]
stmmac: priv->lock can be used uninitialized

To reproduce: if connman (http://connman.net/) is started,
inserting the stmmac module triggers a "BUG: spinlock bad magic on CPU#0".

Registering the device in stmmac_probe() sends a notification to connman
which brings the interface up before the lock is initialized.

Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/ipv6/sit.c: return unhandled skb to tunnel4_rcv
David McCullough [Mon, 29 Nov 2010 19:32:34 +0000]
net/ipv6/sit.c: return unhandled skb to tunnel4_rcv

I found a problem using an IPv6 over IPv4 tunnel.  When CONFIG_IPV6_SIT
was enabled, the packets would be rejected as net/ipv6/sit.c was catching
all IPPROTO_IPV6 packets and returning an ICMP port unreachable error.

I think this patch fixes the problem cleanly.  I believe the code in
net/ipv4/tunnel4.c:tunnel4_rcv takes care of it properly if none of the
handlers claim the skb.

Signed-off-by: David McCullough <david_mccullough@mcafee.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding: check for assigned mac before adopting the slaves mac address
David Strand [Wed, 1 Dec 2010 19:43:08 +0000]
bonding: check for assigned mac before adopting the slaves mac address

Restore the check for an unassigned mac address before adopting the
first slaves as it's own. The change in behavior was introduced by:

commit c20811a79e671a6a1fe86a8c1afe04aca8a7f085
Author: Jiri Pirko <jpirko@redhat.com>

    bonding: move dev_addr cpy to bond_enslave

Signed-off-by: David Strand <dpstrand@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agob44: fix workarround for wap54g10
Hauke Mehrtens [Sat, 27 Nov 2010 06:47:43 +0000]
b44: fix workarround for wap54g10

The code for the b44_wap54g10_workaround was never included, because
the config option was wrong. The nvram_get function was never in
mainline kernel, only in external OpenWrt patches.

The code should be compiled in when CONFIG_BCM47XX is selected and not
when CONFIG_SSB_DRIVER_MIPS is selected, because nvram_getenv is only
available on bcm47xx platforms and now in the mainline kernel code.
Using an include is better than a second function declaration, to fix
this when the function signature changes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMake the ip6_tunnel reflect the true mtu.
Anders Franzen [Wed, 24 Nov 2010 05:47:18 +0000]
Make the ip6_tunnel reflect the true mtu.

The ip6_tunnel always assumes it consumes 40 bytes (ip6 hdr) of the mtu of the
underlaying device. So for a normal ethernet bearer, the mtu of the ip6_tunnel is
1460.
However, when creating a tunnel the encap limit option is enabled by default, and it
consumes 8 bytes more, so the true mtu shall be 1452.

I dont really know if this breaks some statement in some RFC, so this is a request for
comments.

Signed-off-by: Anders Franzen <anders.franzen@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoaf_unix: limit recursion level
Eric Dumazet [Thu, 25 Nov 2010 04:11:39 +0000]
af_unix: limit recursion level

Its easy to eat all kernel memory and trigger NMI watchdog, using an
exploit program that queues unix sockets on top of others.

lkml ref : http://lkml.org/lkml/2010/11/25/8

This mechanism is used in applications, one choice we have is to have a
recursion limit.

Other limits might be needed as well (if we queue other types of files),
since the passfd mechanism is currently limited by socket receive queue
sizes only.

Add a recursion_level to unix socket, allowing up to 4 levels.

Each time we send an unix socket through sendfd mechanism, we copy its
recursion level (plus one) to receiver. This recursion level is cleared
when socket receive queue is emptied.

Reported-by: Марк Коренберг <socketpair@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopch_gbe driver: The wrong of initializer entry
Toshiharu Okada [Mon, 29 Nov 2010 06:18:07 +0000]
pch_gbe driver: The wrong of initializer entry

The wrong of initializer entry was modified.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopch_gbe dreiver: chang author
Toshiharu Okada [Sun, 21 Nov 2010 19:58:37 +0000]
pch_gbe dreiver: chang author

This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake".
I update the Kconfig, renamed "Topcliff" to "EG20T".

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoucc_geth: fix ucc halt problem in half duplex mode
Yang Li [Thu, 25 Nov 2010 23:29:58 +0000]
ucc_geth: fix ucc halt problem in half duplex mode

In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size),
the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation
of the QE Reference Manual.  But that will sometimes cause tx halt
while working in half duplex mode.

According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO
threshold size can cause UCC to halt), setting UTFTT less than
[(UTFS x (M - 8)/M) - 128] will prevent this from happening
(M is the minimum buffer size).

The patch changes UTFTT back to 256.

Signed-off-by: Li Yang <leoli@freescale.com>
Cc: Jean-Denis Boyer <jdboyer@media5corp.com>
Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoinet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners
Nagendra Tomar [Fri, 26 Nov 2010 14:26:27 +0000]
inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners

inet sockets corresponding to passive connections are added to the bind hash
using ___inet_inherit_port(). These sockets are later removed from the bind
hash using __inet_put_port(). These two functions are not exactly symmetrical.
__inet_put_port() decrements hashinfo->bsockets and tb->num_owners, whereas
___inet_inherit_port() does not increment them. This results in both of these
going to -ve values.

This patch fixes this by calling inet_bind_hash() from ___inet_inherit_port(),
which does the right thing.

'bsockets' and 'num_owners' were introduced by commit a9d8f9110d7e953c
(inet: Allowing more than 64k connections and heavily optimize bind(0))

Signed-off-by: Nagendra Singh Tomar <tomer_iisc@yahoo.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoehea: Add some info messages and fix an issue
Breno Leitao [Fri, 26 Nov 2010 07:26:27 +0000]
ehea: Add some info messages and fix an issue

This patch adds some debug information about ehea not being able to
allocate enough spaces. Also it correctly updates the amount of available
skb.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agohso: fix disable_net
Filip Aben [Thu, 25 Nov 2010 03:40:50 +0000]
hso: fix disable_net

The HSO driver incorrectly creates a serial device instead of a net
device when disable_net is set. It shouldn't create anything for the
network interface.

Signed-off-by: Filip Aben <f.aben@option.com>
Reported-by: Piotr Isajew <pki@ex.com.pl>
Reported-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoNET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty
Jiri Slaby [Wed, 24 Nov 2010 13:54:54 +0000]
NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty

We register lapb when tty is created, but unregister it only when the
device is UP. So move the lapb_unregister to x25_asy_close_tty after
the device is down.

The old behaviour causes ldisc switching to fail each second attempt,
because we noted for us that the device is unused, so we use it the
second time, but labp layer still have it registered, so it fails
obviously.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Sergey Lapin <slapin@ossfans.org>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Tested-by: Sergey Lapin <slapin@ossfans.org>
Tested-by: Mikhail Ulyanov <ulyanov.mikhail@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocxgb4vf: fix setting unicast/multicast addresses ...
Casey Leedom [Wed, 24 Nov 2010 12:23:57 +0000]
cxgb4vf: fix setting unicast/multicast addresses ...

We were truncating the number of unicast and multicast MAC addresses
supported.  Additionally, we were incorrectly computing the MAC Address
hash (a "1 << N" where we needed a "1ULL << N").

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet, ppp: Report correct error code if unit allocation failed
Cyrill Gorcunov [Tue, 23 Nov 2010 11:43:44 +0000]
net, ppp: Report correct error code if unit allocation failed

Allocating unit from ird might return several error codes
not only -EAGAIN, so it should not be changed and returned
precisely. Same time unit release procedure should be invoked
only if device is unregistering.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoDECnet: don't leak uninitialized stack byte
Dan Rosenberg [Tue, 23 Nov 2010 11:02:13 +0000]
DECnet: don't leak uninitialized stack byte

A single uninitialized padding byte is leaked to userspace.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
CC: stable <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoau1000_eth: fix invalid address accessing the MAC enable register
Wolfgang Grandegger [Tue, 23 Nov 2010 06:40:25 +0000]
au1000_eth: fix invalid address accessing the MAC enable register

"aup->enable" holds already the address pointing to the MAC enable
register. The bug was introduced by commit d0e7cb:

"au1000-eth: remove volatiles, switch to I/O accessors".

CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodccp: fix error in updating the GAR
Gerrit Renker [Tue, 23 Nov 2010 02:36:56 +0000]
dccp: fix error in updating the GAR

This fixes a bug in updating the Greatest Acknowledgment number Received (GAR):
the current implementation does not track the greatest received value -
lower values in the range AWL..AWH (RFC 4340, 7.5.1) erase higher ones.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
David S. Miller [Sun, 28 Nov 2010 19:27:44 +0000]
Merge branch 'vhost-net' of git://git./linux/kernel/git/mst/vhost

8 years agotcp: restrict net.ipv4.tcp_adv_win_scale (#20312)
Alexey Dobriyan [Mon, 22 Nov 2010 12:54:21 +0000]
tcp: restrict net.ipv4.tcp_adv_win_scale (#20312)

tcp_win_from_space() does the following:

      if (sysctl_tcp_adv_win_scale <= 0)
              return space >> (-sysctl_tcp_adv_win_scale);
      else
              return space - (space >> sysctl_tcp_adv_win_scale);

"space" is int.

As per C99 6.5.7 (3) shifting int for 32 or more bits is
undefined behaviour.

Indeed, if sysctl_tcp_adv_win_scale is exactly 32,
space >> 32 equals space and function returns 0.

Which means we busyloop in tcp_fixup_rcvbuf().

Restrict net.ipv4.tcp_adv_win_scale to [-31, 31].

Fix https://bugzilla.kernel.org/show_bug.cgi?id=20312

Steps to reproduce:

      echo 32 >/proc/sys/net/ipv4/tcp_adv_win_scale
      wget www.kernel.org
      [softlockup]

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetns: Don't leak others' openreq-s in proc
Pavel Emelyanov [Mon, 22 Nov 2010 03:26:12 +0000]
netns: Don't leak others' openreq-s in proc

The /proc/net/tcp leaks openreq sockets from other namespaces.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoNet: ceph: Makefile: Remove unnessary code
Tracey Dent [Sun, 21 Nov 2010 15:23:50 +0000]
Net: ceph: Makefile: Remove unnessary code

Remove the if and else conditional because the code is in mainline and there
is no need in it being there.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agovhost/net: fix rcu check usage
Michael S. Tsirkin [Sun, 14 Nov 2010 15:31:52 +0000]
vhost/net: fix rcu check usage

Incorrect rcu check was used as rcu isn't done
under mutex here. Force check to 1 for now,
to stop it from complaining.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

8 years agoeconet: fix CVE-2010-3848
Phil Blundell [Wed, 24 Nov 2010 19:51:47 +0000]
econet: fix CVE-2010-3848

Don't declare variable sized array of iovecs on the stack since this
could cause stack overflow if msg->msgiovlen is large.  Instead, coalesce
the user-supplied data into a new buffer and use a single iovec for it.

Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoeconet: fix CVE-2010-3850
Phil Blundell [Wed, 24 Nov 2010 19:49:53 +0000]
econet: fix CVE-2010-3850

Add missing check for capable(CAP_NET_ADMIN) in SIOCSIFADDR operation.

Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoeconet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849
Phil Blundell [Wed, 24 Nov 2010 19:49:19 +0000]
econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849

Later parts of econet_sendmsg() rely on saddr != NULL, so return early
with EINVAL if NULL was passed otherwise an oops may occur.

Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotcp: Make TCP_MAXSEG minimum more correct.
David S. Miller [Wed, 24 Nov 2010 19:47:22 +0000]
tcp: Make TCP_MAXSEG minimum more correct.

Use TCP_MIN_MSS instead of constant 64.

Reported-by: Min Zhang <mzhang@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoisdn: icn: Fix stack corruption bug.
Steven Rostedt [Wed, 24 Nov 2010 19:19:05 +0000]
isdn: icn: Fix stack corruption bug.

Running randconfig with ktest.pl I hit this bug:

[   16.101158] ICN-ISDN-driver Rev 1.65.6.8 mem=0x000d0000
[   16.106376] icn: (line0) ICN-2B, port 0x320 added
[   16.111064] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c1642880
[   16.111066]
[   16.121214] Pid: 1, comm: swapper Not tainted 2.6.37-rc2-test-00124-g6656b3f #8
[   16.128499] Call Trace:
[   16.130942]  [<c0f51662>] ? printk+0x1d/0x23
[   16.135200]  [<c0f5153f>] panic+0x5c/0x162
[   16.139286]  [<c0d62a9a>] ? icn_addcard+0x6d/0xbe
[   16.143975]  [<c0445783>] print_tainted+0x0/0x8c
[   16.148582]  [<c1642880>] ? icn_init+0xd8/0xdf
[   16.153012]  [<c1642880>] icn_init+0xd8/0xdf
[   16.157271]  [<c04012e5>] do_one_initcall+0x8c/0x143
[   16.162222]  [<c16427a8>] ? icn_init+0x0/0xdf
[   16.166566]  [<c15f1a05>] kernel_init+0x13f/0x1da
[   16.171256]  [<c15f18c6>] ? kernel_init+0x0/0x1da
[   16.175945]  [<c0403bfe>] kernel_thread_helper+0x6/0x10
[   16.181181] panic occurred, switching back to text console

Looking into it I found that the stack was corrupted by the assignment
of the Rev #. The variable rev is given 10 bytes, and in this output the
characters that were copied was: " 1.65.6.8 $". Which was 11 characters
plus the null ending character for a total of 12 bytes, thus corrupting
the stack.

This patch ups the variable size to 20 bytes as well as changes the
strcpy to strncpy. I also added a check to make sure '$' is found.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Wed, 24 Nov 2010 17:16:14 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

8 years agoaf_unix: limit unix_tot_inflight
Eric Dumazet [Wed, 24 Nov 2010 17:15:27 +0000]
af_unix: limit unix_tot_inflight

Vegard Nossum found a unix socket OOM was possible, posting an exploit
program.

My analysis is we can eat all LOWMEM memory before unix_gc() being
called from unix_release_sock(). Moreover, the thread blocked in
unix_gc() can consume huge amount of time to perform cleanup because of
huge working set.

One way to handle this is to have a sensible limit on unix_tot_inflight,
tested from wait_for_unix_gc() and to force a call to unix_gc() if this
limit is hit.

This solves the OOM and also reduce overall latencies, and should not
slowdown normal workloads.

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agowireless: b43: fix error path in SDIO
Guennadi Liakhovetski [Tue, 23 Nov 2010 16:10:24 +0000]
wireless: b43: fix error path in SDIO

Fix unbalanced call to sdio_release_host() on the error path.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agocarl9170: fix virtual interface setup crash
Christian Lamparter [Sat, 20 Nov 2010 12:15:27 +0000]
carl9170: fix virtual interface setup crash

This patch fixes a faulty bound check which caused a
crash when too many virtual interface were brought up.

BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<f8125f67>] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170]
*pde = 00000000
Oops: 0002 [#1] PREEMPT
Modules linked in: carl9170 [...]
Pid: 4720, comm: wpa_supplicant Not tainted 2.6.37-rc2-wl+
EIP: 0060:[<f8125f67>] EFLAGS: 00210206 CPU: 0
EIP is at carl9170_op_add_interface+0x1d7/0x2c0 [carl9170]
EAX: 00000000 ...
Process wpa_supplicant
Stack:
 f4f88f34 fffffff4 ..
Call Trace:
 [<f8f4e666>] ? ieee80211_do_open+0x406/0x5c0 [mac80211]
 [...]
Code: <89> 42 04 ...
EIP: [<f8125f67>] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170]
CR2: 0000000000000004

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agossb: b43-pci-bridge: Add new vendor for BCM4318
Daniel Klaffenbach [Sat, 20 Nov 2010 03:25:21 +0000]
ssb: b43-pci-bridge: Add new vendor for BCM4318

Add new vendor for Broadcom 4318.

Signed-off-by: Daniel Klaffenbach <danielklaffenbach@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath9k: fix timeout on stopping rx dma
Felix Fietkau [Sat, 20 Nov 2010 02:08:47 +0000]
ath9k: fix timeout on stopping rx dma

It seems that using ath9k_hw_stoppcurecv to stop rx dma is not enough.
When it's time to stop DMA, the PCU is still busy, so the rx enable
bit never clears.
Using ath9k_hw_abortpcurecv helps with getting rx stopped much faster,
with this change, I cannot reproduce the rx stop related WARN_ON anymore.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoof/phylib: Use device tree properties to initialize Marvell PHYs.
David Daney [Fri, 19 Nov 2010 12:13:18 +0000]
of/phylib: Use device tree properties to initialize Marvell PHYs.

Some aspects of PHY initialization are board dependent, things like
indicator LED connections and some clocking modes cannot be determined
by probing.  The dev_flags element of struct phy_device can be used to
control these things if an appropriate value can be passed from the
Ethernet driver.  We run into problems however if the PHY connections
are specified by the device tree.  There is no way for the Ethernet
driver to know what flags it should pass.

If we are using the device tree, the struct phy_device will be
populated with the device tree node corresponding to the PHY, and we
can extract extra configuration information from there.

The next question is what should the format of that information be?
It is highly device specific, and the device tree representation
should not be tied to any arbitrary kernel defined constants.  A
straight forward representation is just to specify the exact bits that
should be set using the "marvell,reg-init" property:

      phy5: ethernet-phy@5 {
        reg = <5>;
        compatible = "marvell,88e1149r";
        marvell,reg-init =
                /* led[0]:1000, led[1]:100, led[2]:10, led[3]:tx */
                <3 0x10 0 0x5777>, /* Reg 3,16 <- 0x5777 */
                /* mix %:0, led[0123]:drive low off hiZ */
                <3 0x11 0 0x00aa>, /* Reg 3,17 <- 0x00aa */
                /* default blink periods. */
                <3 0x12 0 0x4105>, /* Reg 3,18 <- 0x4105 */
                /* led[4]:rx, led[5]:dplx, led[45]:drive low off hiZ */
                <3 0x13 0 0x0a60>; /* Reg 3,19 <- 0x0a60 */
      };

      phy6: ethernet-phy@6 {
        reg = <6>;
        compatible = "marvell,88e1118";
        marvell,reg-init =
                /* Fix rx and tx clock transition timing */
                <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
                /* Adjust LED drive. */
                <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
                /* irq, blink-activity, blink-link */
                <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
      };

The Marvell PHYs have a page select register at register 22 (0x16), we
can specify any register by its page and register number.  These are
the first and second word.  The third word contains a mask to be ANDed
with the existing register value, and the fourth word is ORed with the
result to yield the new register value.  The new marvell_of_reg_init
function leaves the page select register unchanged, so a call to it
can be dropped into the .config_init functions without unduly
affecting the state of the PHY.

If CONFIG_OF_MDIO is not set, there is no of_node, or no
"marvell,reg-init" property, the PHY initialization is unchanged.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agophylib: Add support for Marvell 88E1149R devices.
David Daney [Fri, 19 Nov 2010 11:58:53 +0000]
phylib: Add support for Marvell 88E1149R devices.

The 88E1149R is 10/100/1000 quad-gigabit Ethernet PHY.  The
.config_aneg function can be shared with 88E1118, but it needs its own
.config_init.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agophylib: Use common page register definition for Marvell PHYs.
David Daney [Fri, 19 Nov 2010 11:58:52 +0000]
phylib: Use common page register definition for Marvell PHYs.

The definition of the Marvell PHY page register is not specific to
88E1121, so rename the macro to MII_MARVELL_PHY_PAGE, and use it
throughout.

Suggested-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Cyril Chemparathy <cyril@ti.com>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlge: Fix incorrect usage of module parameters and netdev msg level
Sonny Rao [Thu, 18 Nov 2010 11:50:02 +0000]
qlge: Fix incorrect usage of module parameters and netdev msg level

Driver appears to be mistaking the permission field with default value
in the case of debug and qlge_irq_type.

Driver is also passing debug as a bitmask into netif_msg_init()
which wants a number of bits.  Ron Mercer suggests we should
change this to pass in -1 so the defaults get used instead,
which makes the default much less verbose.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: fix missing in6_ifa_put in addrconf
John Fastabend [Mon, 15 Nov 2010 20:29:21 +0000]
ipv6: fix missing in6_ifa_put in addrconf

Fix ref count bug introduced by

commit 2de795707294972f6c34bae9de713e502c431296
Author: Lorenzo Colitti <lorenzo@google.com>
Date:   Wed Oct 27 18:16:49 2010 +0000

ipv6: addrconf: don't remove address state on ifdown if the address
is being kept

Fix logic so that addrconf_ifdown() decrements the inet6_ifaddr
refcnt correctly with in6_ifa_put().

Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoSuperH IrDA: correct Baud rate error correction
Nicolas Kaiser [Thu, 18 Nov 2010 14:24:02 +0000]
SuperH IrDA: correct Baud rate error correction

It looks to me as if the second value of rate_err_array is intended
to be a decimal 625. However, with a leading 0 it becomes an octal
constant, and as such evaluates to a decimal 405.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoatl1c: Fix hardware type check for enabling OTP CLK
Ben Hutchings [Sun, 21 Nov 2010 18:06:48 +0000]
atl1c: Fix hardware type check for enabling OTP CLK

Commit 496c185c9495629ef1c65387cb2594578393cfe0 "atl1c: Add support
for Atheros AR8152 and AR8152" added the condition:

             if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b)

for enabling OTP CLK, and the condition:

             if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c)

for disabling OTP CLK.  Since the two previously defined hardware
types are athr_l1c and athr_l2c, the latter condition appears to be
the correct one.  Change the former to match.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: allow GFP_HIGHMEM in __vmalloc()
Eric Dumazet [Sat, 20 Nov 2010 07:46:35 +0000]
net: allow GFP_HIGHMEM in __vmalloc()

We forgot to use __GFP_HIGHMEM in several __vmalloc() calls.

In ceph, add the missing flag.

In fib_trie.c, xfrm_hash.c and request_sock.c, using vzalloc() is
cleaner and allows using HIGHMEM pages as well.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding: change list contact to netdev@vger.kernel.org
Simon Horman [Sun, 21 Nov 2010 17:58:04 +0000]
bonding: change list contact to netdev@vger.

bonding-devel@lists.sourceforge.net seems only receive spam
and discussion seems to already occur on netdev@vger.kernel.org.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoe1000: fix screaming IRQ
Anupam Chanda [Sun, 21 Nov 2010 17:54:21 +0000]
e1000: fix screaming IRQ

VMWare reports that the e1000 driver has a bug when bringing down the
interface, such that interrupts are not disabled in the hardware but the
driver stops reporting that it consumed the interrupt.

The fix is to set the driver's "down" flag later in the routine,
after all the timers and such have exited, preventing the interrupt
handler from being called and exiting early without handling the
interrupt.

CC: Anupam Chanda <anupamc@vmware.com>
CC: stable kernel <stable@kernel.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: fix kernel-doc for sk_filter_rcu_release
Randy Dunlap [Thu, 18 Nov 2010 13:02:37 +0000]
net: fix kernel-doc for sk_filter_rcu_release

Fix kernel-doc warning for sk_filter_rcu_release():

Warning(net/core/filter.c:586): missing initial short description on line:
 *  sk_filter_rcu_release: Release a socket filter by rcu_head

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobe2net: Fix to avoid firmware update when interface is not open.
Sarveshwar Bandi [Thu, 18 Nov 2010 23:44:45 +0000]
be2net: Fix to avoid firmware update when interface is not open.

Since interrupts are enabled only when open is called on the interface,
Attempting a firmware update operation when interface is down could lead to
partial success or failure of operation. This fix fails the request if
netif_running is false.

Signed-off-by: Sarveshwar Bandi <Sarveshwar.Bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetfilter: fix IP_VS dependencies
Patrick McHardy [Thu, 18 Nov 2010 08:20:57 +0000]
netfilter: fix IP_VS dependencies

When NF_CONNTRACK is enabled, IP_VS uses conntrack symbols.
Therefore IP_VS can't be linked statically when conntrack
is built modular.

Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: irda: irttp: sync error paths of data- and udata-requests
Wolfram Sang [Tue, 16 Nov 2010 09:40:02 +0000]
net: irda: irttp: sync error paths of data- and udata-requests

irttp_data_request() returns meaningful errorcodes, while irttp_udata_request()
just returns -1 in similar situations. Sync the two and the loglevels of the
accompanying output.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: Expose reachable and retrans timer values as msecs
Thomas Graf [Wed, 17 Nov 2010 04:12:02 +0000]
ipv6: Expose reachable and retrans timer values as msecs

Expose reachable and retrans timer values in msecs instead of jiffies.
Both timer values are already exposed as msecs in the neighbour table
netlink interface.

The creation timestamp format with increased precision is kept but
cleaned up.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Thu, 18 Nov 2010 19:56:09 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

8 years agoipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies
Thomas Graf [Wed, 17 Nov 2010 01:44:24 +0000]
ipv6: Expose IFLA_PROTINFO timer values in msecs instead of jiffies

IFLA_PROTINFO exposes timer related per device settings in jiffies.
Change it to expose these values in msecs like the sysctl interface
does.

I did not find any users of IFLA_PROTINFO which rely on any of these
values and even if there are, they are likely already broken because
there is no way for them to reliably convert such a value to another
time format.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years ago3c59x: fix build failure on !CONFIG_PCI
Namhyung Kim [Tue, 16 Nov 2010 05:27:51 +0000]
3c59x: fix build failure on !CONFIG_PCI

VORTEX_PCI() could return NULL so it needs to be casted before
accessing any member of struct pci_dev. This fixes following
build failure. Likewise VORTEX_EISA() was changed also.

CC [M] drivers/net/3c59x.o
drivers/net/3c59x.c: In function 'acpi_set_WOL':
drivers/net/3c59x.c:3211:39: warning: dereferencing 'void *' pointer
drivers/net/3c59x.c:3211:39: error: request for member 'current_state' in something not a structure or union
make[3]: *** [drivers/net/3c59x.o] Error 1
make[2]: *** [drivers/net/3c59x.o] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipg.c: remove id [SUNDANCE, 0x1021]
Ken Kawasaki [Sat, 13 Nov 2010 13:42:08 +0000]
ipg.c: remove id [SUNDANCE, 0x1021]

ipg.c:
  The id [SUNDANCE, 0x1021] (=[0x13f0, 0x1021]) is defined
  at dl2k.h and ipg.c.
  But this device works better with dl2k driver.

  This problem is similar with the commit
  [25cca5352712561fba97bd37c495593d641c1d39
  ipg: Remove device claimed by dl2k from pci id table]
  at 11 Feb 2010.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: caif: spi: fix potential NULL dereference
Vasiliy Kulikov [Thu, 18 Nov 2010 18:35:58 +0000]
net: caif: spi: fix potential NULL dereference

alloc_netdev() is not checked here for NULL return value.  dev is
check instead.  It might lead to NULL dereference of ndev.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoath9k_htc: Avoid setting QoS control for non-QoS frames
Rajkumar Manoharan [Thu, 18 Nov 2010 06:49:52 +0000]
ath9k_htc: Avoid setting QoS control for non-QoS frames

Setting tid information in the TX header is required only for QoS
frames. Not handling this case causes severe data loss with some APs.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agonet: zero kobject in rx_queue_release
John Fastabend [Tue, 16 Nov 2010 19:42:53 +0000]
net: zero kobject in rx_queue_release

netif_set_real_num_rx_queues() can decrement and increment
the number of rx queues. For example ixgbe does this as
features and offloads are toggled. Presumably this could
also happen across down/up on most devices if the available
resources changed (cpu offlined).

The kobject needs to be zero'd in this case so that the
state is not preserved across kobject_put()/kobject_init_and_add().

This resolves the following error report.

ixgbe 0000:03:00.0: eth2: NIC Link is Up 10 Gbps, Flow Control: RX/TX
kobject (ffff880324b83210): tried to init an initialized object, something is seriously wrong.
Pid: 1972, comm: lldpad Not tainted 2.6.37-rc18021qaz+ #169
Call Trace:
 [<ffffffff8121c940>] kobject_init+0x3a/0x83
 [<ffffffff8121cf77>] kobject_init_and_add+0x23/0x57
 [<ffffffff8107b800>] ? mark_lock+0x21/0x267
 [<ffffffff813c6d11>] net_rx_queue_update_kobjects+0x63/0xc6
 [<ffffffff813b5e0e>] netif_set_real_num_rx_queues+0x5f/0x78
 [<ffffffffa0261d49>] ixgbe_set_num_queues+0x1c6/0x1ca [ixgbe]
 [<ffffffffa0262509>] ixgbe_init_interrupt_scheme+0x1e/0x79c [ixgbe]
 [<ffffffffa0274596>] ixgbe_dcbnl_set_state+0x167/0x189 [ixgbe]

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Fix duplicate volatile warning.
Tetsuo Handa [Thu, 18 Nov 2010 17:40:04 +0000]
net: Fix duplicate volatile warning.

jiffies is defined as "volatile".

  extern unsigned long volatile __jiffy_data jiffies;

ACCESS_ONCE() uses "volatile".
As a result, some compilers warn duplicate `volatile' for ACCESS_ONCE(jiffies).

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMAINTAINERS: Add stmmac maintainer
Giuseppe Cavallaro [Thu, 18 Nov 2010 17:32:02 +0000]
MAINTAINERS: Add stmmac maintainer

Add STMMAC to the list of supported Ethernet drivers
and myself as maintainer.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding: fix a race in IGMP handling
Eric Dumazet [Thu, 18 Nov 2010 17:30:42 +0000]
bonding: fix a race in IGMP handling

RCU conversion in IGMP code done in net-next-2.6 raised a race in
__bond_resend_igmp_join_requests().

It iterates in_dev->mc_list without appropriate protection (RTNL, or
read_lock on in_dev->mc_list_lock).

Another cpu might delete an entry while we use it and trigger a fault.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocfg80211: fix can_beacon_sec_chan, reenable HT40
Mark Mentovai [Wed, 17 Nov 2010 21:34:37 +0000]
cfg80211: fix can_beacon_sec_chan, reenable HT40

This follows wireless-testing 9236d838c920e90708570d9bbd7bb82d30a38130
("cfg80211: fix extension channel checks to initiate communication") and
fixes accidental case fall-through. Without this fix, HT40 is entirely
blocked.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
Cc: stable@kernel.org
Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agogianfar: fix signedness issue
Nicolas Kaiser [Mon, 15 Nov 2010 10:59:42 +0000]
gianfar: fix signedness issue

irq_of_parse_and_map() has an unsigned return type.
Testing for a negative error value doesn't work here.

Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: bnx2x: fix error value sign
Vasiliy Kulikov [Sun, 14 Nov 2010 10:08:34 +0000]
net: bnx2x: fix error value sign

bnx2x_init_one() should return negative value on error.
By mistake it returns ENODEV instead of -ENODEV.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years ago8139cp: fix checksum broken
Shan Wei [Wed, 17 Nov 2010 19:55:08 +0000]
8139cp: fix checksum broken

I am not family with RealTek RTL-8139C+ series 10/100 PCI Ethernet driver.
I try to guess the meaning of RxProtoIP and IPFail.
RxProtoIP stands for received IPv4 packet that upper protocol is not tcp and udp.
!(status & IPFail) is true means that driver correctly to check checksum in IPv4 header.

If these are right, driver will set ip_summed with CHECKSUM_UNNECESSARY for other
upper protocol, e.g. sctp, igmp protocol. This will cause protocol stack ignores
checksum check for packets with invalid checksum.

This patch is only compile-test.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agor8169: fix checksum broken
Shan Wei [Fri, 12 Nov 2010 00:15:25 +0000]
r8169: fix checksum broken

If r8196 received packets with invalid sctp/igmp(not tcp, udp) checksum, r8196 set skb->ip_summed
wit CHECKSUM_UNNECESSARY. This cause that upper protocol don't check checksum field.

I am not family with r8196 driver. I try to guess the meaning of RxProtoIP and IPFail.
RxProtoIP stands for received IPv4 packet that upper protocol is not tcp and udp.
!(opts1 & IPFail) is true means that driver correctly to check checksum in IPv4 header.

If it's right, I think we should not set ip_summed wit CHECKSUM_UNNECESSARY for my sctp packets
with invalid checksum.

If it's not right, please tell me.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agords: Integer overflow in RDS cmsg handling
Dan Rosenberg [Wed, 17 Nov 2010 06:37:16 +0000]
rds: Integer overflow in RDS cmsg handling

In rds_cmsg_rdma_args(), the user-provided args->nr_local value is
restricted to less than UINT_MAX.  This seems to need a tighter upper
bound, since the calculation of total iov_size can overflow, resulting
in a small sock_kmalloc() allocation.  This would probably just result
in walking off the heap and crashing when calling rds_rdma_pages() with
a high count value.  If it somehow doesn't crash here, then memory
corruption could occur soon after.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocfg80211: fix extension channel checks to initiate communication
Luis R. Rodriguez [Sat, 13 Nov 2010 00:31:23 +0000]
cfg80211: fix extension channel checks to initiate communication

When operating in a mode that initiates communication and using
HT40 we should fail if we cannot use both primary and secondary
channels to initiate communication. Our current ht40 allowmap
only covers STA mode of operation, for beaconing modes we need
a check on the fly as the mode of operation is dynamic and
there other flags other than disable which we should read
to check if we can initiate communication.

Do not allow for initiating communication if our secondary HT40
channel has is either disabled, has a passive scan flag, a
no-ibss flag or is a radar channel. Userspace now has similar
checks but this is also needed in-kernel.

Reported-by: Jouni Malinen <jouni.malinen@atheros.com>
Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoath9k_hw: Set proper eeprom offset for AR9287 HTC devices
Rajkumar Manoharan [Wed, 10 Nov 2010 12:21:26 +0000]
ath9k_hw: Set proper eeprom offset for AR9287 HTC devices

AR9287 based PCI & USB devices are differed in eeprom start offset.
So set proper the offset for HTC devices to read nvram correctly.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoath9k_htc: Add new devices into AR7010
Rajkumar Manoharan [Wed, 10 Nov 2010 12:21:25 +0000]
ath9k_htc: Add new devices into AR7010

Treat new PIDs (0xA704, 0x1200) as AR7010 devices.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoath9k_htc: Update usb device ID list
Rajkumar Manoharan [Wed, 10 Nov 2010 12:21:24 +0000]
ath9k_htc: Update usb device ID list

Added new VID/PIDs into supported devices list

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoath9k: Remove pm_qos request after hw unregister.
Vivek Natarajan [Wed, 10 Nov 2010 09:41:07 +0000]
ath9k: Remove pm_qos request after hw unregister.

Update pm_qos before removing it in deinit_device to prevent this
warning:

pm_qos_update_request() called for unknown object.

Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoxfrm: update flowi saddr in icmp_send if unset
Ulrich Weber [Fri, 5 Nov 2010 01:39:12 +0000]
xfrm: update flowi saddr in icmp_send if unset

otherwise xfrm_lookup will fail to find correct policy

Signed-off-by: Ulrich Weber <uweber@astaro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoirda: irttp: allow zero byte packets
Wolfram Sang [Tue, 16 Nov 2010 17:50:47 +0000]
irda: irttp: allow zero byte packets

Sending zero byte packets is not neccessarily an error (AF_INET accepts it,
too), so just apply a shortcut. This was discovered because of a non-working
software with WINE. See

  http://bugs.winehq.org/show_bug.cgi?id=19397#c86
  http://thread.gmane.org/gmane.linux.irda.general/1643

for very detailed debugging information and a testcase. Kudos to Wolfgang for
those!

Reported-by: Wolfgang Schwotzer <wolfgang.schwotzer@gmx.net>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Tested-by: Mike Evans <mike.evans@cardolan.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocarl9170: fix usb anchor wait timeout
Christian Lamparter [Mon, 15 Nov 2010 14:11:26 +0000]
carl9170: fix usb anchor wait timeout

usb_wait_anchor_empty_timeout's @timeout
wants milliseconds and not jiffies.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agocfg80211: fix WIPHY_FLAG_IBSS_RSN bit
Jussi Kivilinna [Fri, 12 Nov 2010 06:53:56 +0000]
cfg80211: fix WIPHY_FLAG_IBSS_RSN bit

WIPHY_FLAG_IBSS_RSN is BIT(7) as is WIPHY_FLAG_CONTROL_PORT_PROTOCOL. Change
to BIT(8).

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agob43legacy: Fix compile on ARM architecture
Arnd Hannemann [Thu, 11 Nov 2010 17:44:32 +0000]
b43legacy: Fix compile on ARM architecture

When b43legacy is compiled on the arm platform, the following errors are seen:

CC [M] drivers/net/wireless/b43legacy/xmit.o
In file included from include/net/dst.h:11,
from drivers/net/wireless/b43legacy/xmit.c:31:
include/net/dst_ops.h:28: error: expected ':', ',', ';', '}' or '__attribute__'
   before '____cacheline_aligned_in_smp'
include/net/dst_ops.h: In function 'dst_entries_get_fast':
include/net/dst_ops.h:33: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_get_slow':
include/net/dst_ops.h:41: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_add':
include/net/dst_ops.h:49: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_init':
include/net/dst_ops.h:55: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
include/net/dst_ops.h: In function 'dst_entries_destroy':
include/net/dst_ops.h:60: error: 'struct dst_ops' has no member named
   'pcpuc_entries'
make[4]: *** [drivers/net/wireless/b43legacy/xmit.o] Error 1
make[3]: *** [drivers/net/wireless/b43legacy] Error 2
make[2]: *** [drivers/net/wireless] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2

The cause is a missing include of <linux/cache.h>, which is present for
i386 and x86_64 architectures, but not for arm.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agonet: rtnetlink.h -- only include linux/netdevice.h when used by the kernel
Andy Whitcroft [Mon, 15 Nov 2010 06:01:59 +0000]
net: rtnetlink.h -- only include linux/netdevice.h when used by the kernel

The commit below added a new helper dev_ingress_queue to cleanly obtain the
ingress queue pointer.  This necessitated including 'linux/netdevice.h':

  commit 24824a09e35402b8d58dcc5be803a5ad3937bdba
  Author: Eric Dumazet <eric.dumazet@gmail.com>
  Date:   Sat Oct 2 06:11:55 2010 +0000

    net: dynamic ingress_queue allocation

However this include triggers issues for applications in userspace
which use the rtnetlink interfaces.  Commonly this requires they include
'net/if.h' and 'linux/rtnetlink.h' leading to a compiler error as below:

  In file included from /usr/include/linux/netdevice.h:28:0,
                   from /usr/include/linux/rtnetlink.h:9,
                   from t.c:2:
  /usr/include/linux/if.h:135:8: error: redefinition of ‘struct ifmap’
  /usr/include/net/if.h:112:8: note: originally defined here
  /usr/include/linux/if.h:169:8: error: redefinition of ‘struct ifreq’
  /usr/include/net/if.h:127:8: note: originally defined here
  /usr/include/linux/if.h:218:8: error: redefinition of ‘struct ifconf’
  /usr/include/net/if.h:177:8: note: originally defined here

The new helper is only defined for the kernel and protected by __KERNEL__
therefore we can simply pull the include down into the same protected
section.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 13 Nov 2010 01:17:55 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits)
  can-bcm: fix minor heap overflow
  gianfar: Do not call device_set_wakeup_enable() under a spinlock
  ipv6: Warn users if maximum number of routes is reached.
  docs: Add neigh/gc_thresh3 and route/max_size documentation.
  axnet_cs: fix resume problem for some Ax88790 chip
  ipv6: addrconf: don't remove address state on ifdown if the address is being kept
  tcp: Don't change unlocked socket state in tcp_v4_err().
  x25: Prevent crashing when parsing bad X.25 facilities
  cxgb4vf: add call to Firmware to reset VF State.
  cxgb4vf: Fail open if link_start() fails.
  cxgb4vf: flesh out PCI Device ID Table ...
  cxgb4vf: fix some errors in Gather List to skb conversion
  cxgb4vf: fix bug in Generic Receive Offload
  cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue()
  ixgbe: Look inside vlan when determining offload protocol.
  bnx2x: Look inside vlan when determining checksum proto.
  vlan: Add function to retrieve EtherType from vlan packets.
  virtio-net: init link state correctly
  ucc_geth: Fix deadlock
  ucc_geth: Do not bring the whole IF down when TX failure.
  ...

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sat, 13 Nov 2010 01:17:09 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  drivers/ata/pata_octeon_cf.c: delete double assignment
  pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test
  libata: fix NULL sdev dereference race in atapi_qc_complete()

9 years agoMerge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 13 Nov 2010 01:14:20 +0000]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (38 commits)
  Revert "staging: tidspbridge: replace iommu custom for opensource implementation"
  Revert "staging: tidspbridge - move shared memory iommu maps to tiomap3430.c"
  Revert "staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name"
  Revert "staging: tidspbridge - remove custom mmu code from tiomap3430.c"
  Revert "staging: tidspbridge - fix mmufault support"
  Revert "staging: tidspbridge - remove hw directory"
  Revert "staging: tidspbridge - move all iommu related code to a new file"
  Revert "staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct"
  Revert "staging: tidspbridge - remove reserved memory clean up"
  Revert "staging: tidspbridge - deprecate reserve/unreserve_memory funtions"
  Revert "staging: tidspbridge - remove dmm custom module"
  Revert "staging: tidspbridge - update Kconfig to select IOMMU module"
  staging: tidspbridge: hardcode SCM macros while fix is upstreamed
  Staging: keucr driver: fix uninitialized variable & proper memset length
  omap: dsp: remove shm from normal memory
  Staging: wlan-ng: Fix wrong #ifdef #endif sequence
  Staging: Update parameters for cfg80211 key management operation
  Staging: ath6kl: Fix pointer casts on 64-bit architectures
  Staging: batman-adv: suppress false warning when changing the mac address
  Staging: batman-adv: fix interface alternating and bonding reggression
  ...

9 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 13 Nov 2010 01:13:28 +0000]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits)
  Revert "USB: xhci: Use GFP_ATOMIC under spin_lock"
  USB: ohci-jz4740: Fix spelling in MODULE_ALIAS
  UWB: Return UWB_RSV_ALLOC_NOT_FOUND rather than crashing on NULL dereference if kzalloc fails
  usb: core: fix information leak to userland
  usb: misc: iowarrior: fix information leak to userland
  usb: misc: sisusbvga: fix information leak to userland
  usb: subtle increased memory usage in u_serial
  USB: option: fix when the driver is loaded incorrectly for some Huawei devices.
  USB: xhci: Use GFP_ATOMIC under spin_lock
  usb: gadget: goku_udc: add registered flag bit, fixing build
  USB: ehci/mxc: compile fix
  USB: Fix FSL USB driver on non Open Firmware systems
  USB: the development of the usb tree is now in git
  usb: musb: fail unaligned DMA transfers on v1.8 and above
  USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial
  usb.h: fix ioctl kernel-doc info
  usb: musb: gadget: kill duplicate code in musb_gadget_queue()
  usb: musb: Fix handling of spurious SESSREQ
  usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time
  USB: musb: blackfin: push clkin value to platform resources
  ...

9 years agoMerge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Sat, 13 Nov 2010 00:02:30 +0000]
Merge branch 'tty-linus' of git://git./linux/kernel/git/gregkh/tty-2.6

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  n_gsm: Fix length handling
  n_gsm: Copy n2 over when configuring via ioctl interface
  serial: bfin_5xx: grab port lock before making port termios changes
  serial: bfin_5xx: disable CON_PRINTBUFFER for consoles
  serial: bfin_5xx: remove redundant SSYNC to improve TX speed
  serial: bfin_5xx: always include DMA headers
  vcs: make proper usage of the poll flags
  amiserial: Remove unused variable icount
  8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
  tty_ldisc: Fix BUG() on hangup
  TTY: restore tty_ldisc_wait_idle
  SERIAL: blacklist si3052 chip
  drivers/serial/bfin_5xx.c: Fix line continuation defects
  tty: prevent DOS in the flush_to_ldisc
  8250: add support for Kouwell KW-L221N-2
  nozomi: Fix warning from the previous TIOCGCOUNT changes
  tty: fix warning in synclink driver
  tty: Fix formatting in tty.h
  tty: the development tree is now done in git

9 years agoMerge branch 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
Linus Torvalds [Sat, 13 Nov 2010 00:01:55 +0000]
Merge branch 'upstream/core' of git://git./linux/kernel/git/jeremy/xen

* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: do not release any memory under 1M in domain 0
  xen: events: do not unmask event channels on resume
  xen: correct size of level2_kernel_pgt

9 years agoMerge branch 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 12 Nov 2010 23:54:39 +0000]
Merge branch 'stable/xen-pcifront-fixes' of git://git./linux/kernel/git/konrad/xen

* 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  MAINTAINERS: Mark XEN lists as moderated
  xen-pcifront: fix PCI reference leak
  xen-pcifront: Remove duplicate inclusion of headers.
  xen: fix memory leak in Xen PCI MSI/MSI-X allocator.
  MAINTAINERS: Update mailing list name for Xen pieces.

9 years agodrivers/ata/pata_octeon_cf.c: delete double assignment
Julia Lawall [Tue, 26 Oct 2010 10:25:43 +0000]
drivers/ata/pata_octeon_cf.c: delete double assignment

Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agopata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test
Tejun Heo [Fri, 12 Nov 2010 11:01:41 +0000]
pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test

pata_legacy is incorrectly testing PATA_WINBOND_VLB_MODULE instead of
CONFIG_PATA_WINBOND_VLB_MODULE.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata: fix NULL sdev dereference race in atapi_qc_complete()
Tejun Heo [Mon, 1 Nov 2010 10:39:19 +0000]
libata: fix NULL sdev dereference race in atapi_qc_complete()

SCSI commands may be issued between __scsi_add_device() and dev->sdev
assignment, so it's unsafe for ata_qc_complete() to dereference
dev->sdev->locked without checking whether it's NULL or not.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agocan-bcm: fix minor heap overflow
Oliver Hartkopp [Wed, 10 Nov 2010 12:10:30 +0000]
can-bcm: fix minor heap overflow

On 64-bit platforms the ASCII representation of a pointer may be up to 17
bytes long. This patch increases the length of the buffer accordingly.

http://marc.info/?l=linux-netdev&m=128872251418192&w=2

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
CC: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agogianfar: Do not call device_set_wakeup_enable() under a spinlock
Rafael J. Wysocki [Tue, 9 Nov 2010 11:54:19 +0000]
gianfar: Do not call device_set_wakeup_enable() under a spinlock

The gianfar driver calls device_set_wakeup_enable() under a spinlock,
which causes a problem to happen after the recent core power
management changes, because this function can sleep now.  Fix this
by moving the device_set_wakeup_enable() call out of the
spinlock-protected area.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoipv6: Warn users if maximum number of routes is reached.
Ben Greear [Mon, 8 Nov 2010 12:33:48 +0000]
ipv6: Warn users if maximum number of routes is reached.

This gives users at least some clue as to what the problem
might be and how to go about fixing it.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodocs: Add neigh/gc_thresh3 and route/max_size documentation.
Ben Greear [Mon, 8 Nov 2010 09:13:48 +0000]
docs: Add neigh/gc_thresh3 and route/max_size documentation.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoaxnet_cs: fix resume problem for some Ax88790 chip
Ken Kawasaki [Sat, 6 Nov 2010 05:11:24 +0000]
axnet_cs: fix resume problem for some Ax88790 chip

axnet_cs:
    Some Ax88790 chip need to reinitialize the CISREG_CCSR register
    after resume.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoipv6: addrconf: don't remove address state on ifdown if the address is being kept
Lorenzo Colitti [Wed, 27 Oct 2010 18:16:49 +0000]
ipv6: addrconf: don't remove address state on ifdown if the address is being kept

Currently, addrconf_ifdown does not delete statically configured IPv6
addresses when the interface is brought down. The intent is that when
the interface comes back up the address will be usable again. However,
this doesn't actually work, because the system stops listening on the
corresponding solicited-node multicast address, so the address cannot
respond to neighbor solicitations and thus receive traffic. Also, the
code notifies the rest of the system that the address is being deleted
(e.g, RTM_DELADDR), even though it is not. Fix it so that none of this
state is updated if the address is being kept on the interface.

Tested: Added a statically configured IPv6 address to an interface,
started ping, brought link down, brought link up again. When link came
up ping kept on going and "ip -6 maddr" showed that the host was still
subscribed to there

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: Don't change unlocked socket state in tcp_v4_err().
David S. Miller [Fri, 12 Nov 2010 21:35:00 +0000]
tcp: Don't change unlocked socket state in tcp_v4_err().

Alexey Kuznetsov noticed a regression introduced by
commit f1ecd5d9e7366609d640ff4040304ea197fbc618
("Revert Backoff [v3]: Revert RTO on ICMP destination unreachable")

The RTO and timer modification code added to tcp_v4_err()
doesn't check sock_owned_by_user(), which if true means we
don't have exclusive access to the socket and therefore cannot
modify it's critical state.

Just skip this new code block if sock_owned_by_user() is true
and eliminate the now superfluous sock_owned_by_user() code
block contained within.

Reported-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
CC: Damian Lukowski <damian@tvk.rwth-aachen.de>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>

9 years agox25: Prevent crashing when parsing bad X.25 facilities
Dan Rosenberg [Fri, 12 Nov 2010 20:44:42 +0000]
x25: Prevent crashing when parsing bad X.25 facilities

Now with improved comma support.

On parsing malformed X.25 facilities, decrementing the remaining length
may cause it to underflow.  Since the length is an unsigned integer,
this will result in the loop continuing until the kernel crashes.

This patch adds checks to ensure decrementing the remaining length does
not cause it to wrap around.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocxgb4vf: add call to Firmware to reset VF State.
Casey Leedom [Thu, 11 Nov 2010 09:06:53 +0000]
cxgb4vf: add call to Firmware to reset VF State.

Add call to Firmware to reset its VF State when we first attach to the VF.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocxgb4vf: Fail open if link_start() fails.
Casey Leedom [Thu, 11 Nov 2010 09:06:52 +0000]
cxgb4vf: Fail open if link_start() fails.

Fail open if link_start() fails.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocxgb4vf: flesh out PCI Device ID Table ...
Casey Leedom [Thu, 11 Nov 2010 09:06:51 +0000]
cxgb4vf: flesh out PCI Device ID Table ...

Add a bunch of T4 Device IDs for the VF Driver.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocxgb4vf: fix some errors in Gather List to skb conversion
Casey Leedom [Thu, 11 Nov 2010 09:06:50 +0000]
cxgb4vf: fix some errors in Gather List to skb conversion

There were some errors in the way that internal Gather Lists were being
translated into skb's.  This also makes the VF Driver look more like the PF
Driver to facilitate easier comarison.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocxgb4vf: fix bug in Generic Receive Offload
Casey Leedom [Thu, 11 Nov 2010 09:06:49 +0000]
cxgb4vf: fix bug in Generic Receive Offload

Fix botch in Generic Receive Offload (the Packet Gather List Total length
field wasn't being initialized).

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocxgb4vf: don't implement trivial (and incorrect) ndo_select_queue()
Casey Leedom [Thu, 11 Nov 2010 09:06:48 +0000]
cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue()

Don't implement (struct net_device_ops *)->ndo_select_queue() with simple
call to skb_tx_hash().  This leads to non-persistent TX queue selection in
the Linux dev_pick_tx() routine for TCP connections.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>