14 years ago[PATCH] hfs: don't dirty unchanged inode
Roman Zippel [Tue, 2 Aug 2005 04:11:40 +0000]
[PATCH] hfs: don't dirty unchanged inode

If inode size hasn't changed, don't do anything further in truncate, which
also prevents a dirty inode, what might upset some readonly devices quite
badly.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] include/linux/dcookies.h: dummy functions must be "static inline"
Adrian Bunk [Tue, 2 Aug 2005 04:11:39 +0000]
[PATCH] include/linux/dcookies.h: dummy functions must be "static inline"

We don't want these to be global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] v4l: bug fix to correct tea5767 autodetection
Mauro Carvalho Chehab [Tue, 2 Aug 2005 04:11:38 +0000]
[PATCH] v4l: bug fix to correct tea5767 autodetection

This patch does correct radio chip autodetection to avoid misdetecting
mt20xx microtune as tea5767 chip.

Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] aacraid: Fix for controller load based timeouts
Mark Haverkamp [Tue, 2 Aug 2005 04:11:37 +0000]
[PATCH] aacraid: Fix for controller load based timeouts

Martin Drab found that he could get aacraid timeouts with high load on his
controller / disk drive combinations.  After some experimentation Mark
Salyzyn has come up with a patch to reduce the default max_sectors to
something that will keep the controller from being overloaded and will
eliminate the timeout issues.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] m32r: Fix local-timer event handling
Hirokazu Takata [Tue, 2 Aug 2005 04:11:35 +0000]
[PATCH] m32r: Fix local-timer event handling

There was a scheduling problem of the m32r SMP kernel; A process rarely
stopped and gave no responding but the other process have been handled by
the other CPU still lives, then if we did something in the other terminal
or something like that, the stopped process came back to life and continued
its operation...  (ex.  LMbench: lat_sig)

In the m32r SMP kernel, a local-timer event is delivered by using an
IPI(inter processor interrupts); LOCAL_TIMER_IPI.  And a function
smp_send_timer() is prepared to send the LOCAL_TIMER_IPI from the current
CPU to the other CPUs.

The funtion smp_send_timer() was placed and used in do_IRQ() in
former times (before 2.6.10-rc3-mm1 kernel), however, it was
unintentionally removed when arch/m32r/kernel/irq.c was modified to
employ the generic hardirq framework (CONFIG_GENERIC_HARDIRQ) in
my previous patch.

  [PATCH 2.6.10-rc3-mm1] m32r: Use generic hardirq framework
  http://www.ussg.iu.edu/hypermail/linux/kernel/0412.2/0358.html

The following patch fixes the above problem.

Signed-off-by: Hitoshi Yamamoto <hitoshiy@isl.melco.co.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] s390: ioprio & inotify system calls.
Martin Schwidefsky [Tue, 2 Aug 2005 04:11:34 +0000]
[PATCH] s390: ioprio & inotify system calls.

Add system calls for io priorities and inotify.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] s390: kexec fixes and improvements.
Heiko Carstens [Tue, 2 Aug 2005 04:11:33 +0000]
[PATCH] s390: kexec fixes and improvements.

Disable pseudo page fault handling before starting the new kernel and try
to use diag308 to reset the machine.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: add missing 4xx EMAC sysfs nodes
Eugene Surovegin [Mon, 1 Aug 2005 05:34:54 +0000]
[PATCH] ppc32: add missing 4xx EMAC sysfs nodes

Add missing 4xx EMAC data sysfs nodes.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: add bamboo defconfig
Matt Porter [Mon, 1 Aug 2005 05:34:53 +0000]
[PATCH] ppc32: add bamboo defconfig

Add Bamboo platform defconfig

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: add bamboo platform
Matt Porter [Mon, 1 Aug 2005 05:34:53 +0000]
[PATCH] ppc32: add bamboo platform

Add Bamboo platform support.  This is an AMCC 440EP-based reference platform.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: add 440ep support
Matt Porter [Mon, 1 Aug 2005 05:34:52 +0000]
[PATCH] ppc32: add 440ep support

Add PPC440EP core support.  PPC440EP is a PPC440-based SoC with a classic PPC
FPU and another set of peripherals.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: Mark boards that don't build as BROKEN
Kumar Gala [Mon, 1 Aug 2005 05:34:51 +0000]
[PATCH] ppc32: Mark boards that don't build as BROKEN

Marked APUS and GEMINI as BROKEN since they do not build at the platform
level.  We have requested that the maintainers of these boards/platforms
fix them by the time 2.6.15 is released or we plan on concerning them
unmaintained and thus removing them.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] silence cs89x0
Denis Vlasenko [Mon, 1 Aug 2005 05:34:50 +0000]
[PATCH] silence cs89x0

cs89x0 talks a lot at boot.  Seems like debug leftover.  This patch
downgrades printks to KERN_DEBUG.  While we're at it, make these messages a
bit less obscure.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] md: make sure raid5/raid6 resync uses correct 'max_sectors'
NeilBrown [Mon, 1 Aug 2005 05:34:50 +0000]
[PATCH] md: make sure raid5/raid6 resync uses correct 'max_sectors'

The default resync_max_sector is set to "mddev->size << 1".  If the
raid-personality-module updates mddev->size, it must update
resync_max_sectors too.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc64: Fix CONFIG_ALTIVEC not set
Benjamin Herrenschmidt [Mon, 1 Aug 2005 05:34:49 +0000]
[PATCH] ppc64: Fix CONFIG_ALTIVEC not set

The code that sets the altivec capability of the CPU based on firmware
informations can enable altivec when the kernel has CONFIG_ALTIVEC
disabled.  This results in "interesting" crashes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] plug MAN-PAGES maintainer in Documentation/SubmittingPatches
Paul Jackson [Mon, 1 Aug 2005 05:34:48 +0000]
[PATCH] plug MAN-PAGES maintainer in Documentation/SubmittingPatches

Improve the likelihood that someone submitting a patch will notify the
MAN-PAGES maintainer.

This is a follow-up to comments on the July 29 lkml email thread: "Broke nice
range for RLIMIT NICE"

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Michael Kerrisk" <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] MAINTAINERS record -- MAN-PAGES
Michael Kerrisk [Mon, 1 Aug 2005 05:34:47 +0000]
[PATCH] MAINTAINERS record -- MAN-PAGES

Michael maintains the kernel manpages.  He wants us to tell him when we
change or augment the userspace API.  Add his contact details to
MAINTAINERS.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] v4l: cx88 card support and documentation finishing touches
Michael Krufky [Mon, 1 Aug 2005 05:34:46 +0000]
[PATCH] v4l: cx88 card support and documentation finishing touches

Peter Missel:
- Add support for the SVideo input on the GDI Black Gold.

Mauro Carvalho Chehab:
- Linux/version.h removed. Replaced by linux/utsname.h

Michael Krufky:
- Added analog support for DViCO FusionHDTV5 Gold.

CC: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] V4L: Miscellaneous fixes
Mauro Carvalho Chehab [Mon, 1 Aug 2005 05:34:43 +0000]
[PATCH] V4L: Miscellaneous fixes

- Fixed some bttv card numbers.

- BTTV and SAA7134 version numbers incremented to reflect changes.

- pci_dma_supported() is called after pci_set_dma_mask() which
  already did check that for us. This patch removes the unneeded call to
  pci_dma_supported() at bttv-driver.c

- Ensure a sufficient I2C bus idle time between 2 messages for
  saa7134-i2c.c

- It is important to write at first to MO_GP3_IO for cx88-tvaudio.c

- Use try_to_freeze() instead of refrigerator at msp3400.c

- Recognizing the MFPE05-2 Tuner at tveeprom.c

- Add new parameter to help identify radio chipsets at tuner module:
  show_i2c=1 will show 16 reading bytes from detected tuners.

- BTTV does generate some Unimplemented IOCTL log at tuner module:
  0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending
  MSP3400 calls to non-msp3400 tuners. Warning eliminated.
  VIDIOSAUDIO is also called, so debug messages updated. It is still
  requiring IOCTL implementation.

- Added two more tuners.

- Add support for the SVideo input on the GDI Black Gold.

Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Graham Bevan <graham.bevan@ntlworld.com>
Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de>
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] disable addres space randomization default on transmeta CPUs
Eric Lammerts [Mon, 1 Aug 2005 05:34:42 +0000]
[PATCH] disable addres space randomization default on transmeta CPUs

We know that the randomisation slows down some workloads on Transmeta CPUs
by quite large amounts.  We think it's because the CPU needs to recode the
same x86 instructions when they pop up at a different virtual address after
a fork+exec.

So disable randomization by default on those CPUs.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] skge build fix
Andrew Morton [Mon, 1 Aug 2005 05:34:40 +0000]
[PATCH] skge build fix

Make it compile with CONFIG_PM=n

Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] i2c-mpc.c: revert duplicate patch
Andrew Morton [Mon, 1 Aug 2005 05:34:40 +0000]
[PATCH] i2c-mpc.c: revert duplicate patch

Seems that both Greg and I submitted the same patch and it just kept on
applying...

Cc: Greg KH <greg@kroah.com>
Cc: Kumar Gala <galak@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoRevert ACPI interrupt resume changes
Linus Torvalds [Mon, 1 Aug 2005 19:37:54 +0000]
Revert ACPI interrupt resume changes

If there are devices that use interrupts over a suspend event, ACPI must
restore the PCI interrupt links on resume.  Anything else breaks any
device that hasn't been converted to the new (dubious) PM rules.

Drivers that need the irq free/re-aquire sequence can be done one by one
independently of this one.

14 years agoFix get_user_pages() race for write access
Linus Torvalds [Mon, 1 Aug 2005 18:14:49 +0000]
Fix get_user_pages() race for write access

There's no real guarantee that handle_mm_fault() will always be able to
break a COW situation - if an update from another thread ends up
modifying the page table some way, handle_mm_fault() may end up
requiring us to re-try the operation.

That's normally fine, but get_user_pages() ended up re-trying it as a
read, and thus a write access could in theory end up losing the dirty
bit or be done on a page that had not been properly COW'ed.

This makes get_user_pages() always retry write accesses as write
accesses by making "follow_page()" require that a writable follow has
the dirty bit set.  That simplifies the code and solves the race: if the
COW break fails for some reason, we'll just loop around and try again.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] tridentfb: Fix scrolling artifacts during disk IO
Antonino A. Daplas [Mon, 1 Aug 2005 15:51:34 +0000]
[PATCH] tridentfb: Fix scrolling artifacts during disk IO

Reported by: Jochen Hein (Bugzilla Bug 4312)

When there is disk I/O happening, the framebuffer has a little snow on
the screen.  Once I/O has finished, no garbage remains on screen.

This bug was explained by: Knut Petersen

Most important is CRTC register 2f, signal quality is also improved for
higher vclk values by changing set_vclk() according to the X drivers and
cyblafb.c

The fix is to set the performance register (0x2f) with a more stable
value.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] tridentfb: Fix scrolling artifacts if acceleration is enabled
Antonino A. Daplas [Mon, 1 Aug 2005 15:46:44 +0000]
[PATCH] tridentfb: Fix scrolling artifacts if acceleration is enabled

Reported by: Jochen Hein (Bugzilla Bug 4386)

booting leaves the end of long lines in the last line on screen when
scrolling.  When X is running, scrolling puts garbage on the screen
(looks like X data) Console switch fixes the screen.  Behaviour seems to
be identical with noaccel and without on the video=tridentfb parameter
in lilo.conf.

This bug was explained by: Knut_Petersen

Acceleration is broken for all BLADE 3D chips for all versions of kernel
2.6 except for 32bit modes.  Most important reason is that the u32 col
parameter of the graphics engine needs the color value replicated to all
u8 of the u32 (8bit modes) and to both u16 of the u32.

Fix color value passed to graphics engine, verified by the reporter.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] remove sys_set_zone_reclaim()
Ingo Molnar [Mon, 1 Aug 2005 11:39:13 +0000]
[PATCH] remove sys_set_zone_reclaim()

This removes sys_set_zone_reclaim() for now.  While i'm sure Martin is
trying to solve a real problem, we must not hard-code an incomplete and
insufficient approach into a syscall, because syscalls are pretty much
for eternity.  I am quite strongly convinced that this syscall must not
hit v2.6.13 in its current form.

Firstly, the syscall lacks basic syscall design: e.g. it allows the
global setting of VM policy for unprivileged users. (!) [ Imagine an
Oracle installation and a SAP installation on the same NUMA box fighting
over the 'optimal' setting for this flag. What will they do? Will they
try to set the flag to their own preferred value every second or so? ]

Secondly, it was added based on a single datapoint from Martin:

 http://marc.theaimsgroup.com/?l=linux-mm&m=111763597218177&w=2

where Martin characterizes the numbers the following way:

 ' Run-to-run variability for "make -j" is huge, so these numbers aren't
   terribly useful except to see that with reclaim the benchmark still
   finishes in a reasonable amount of time. '

in other words: the fundamental problem has likely not been solved, only
a tendential move into the right direction has been observed, and a
handful of numbers were picked out of a set of hugely variable results,
without showing the variability data. How much variance is there
run-to-run?

I'd really suggest to first walk the walk and see what's needed to get
stable & predictable kernel compilation numbers on that NUMA box, before
adding random syscalls to tune a particular aspect of the VM ... which
approach might not even matter once the whole picture has been analyzed
and understood!

The third, most important point is that the syscall exposes VM tuning
internals in a completely unstructured way. What sense does it make to
have a _GLOBAL_ per-node setting for 'should we go to another node for
reclaim'? If then it might make sense to do this per-app, via numalib or
so.

The change is minimalistic in that it doesnt remove the syscall and the
underlying infrastructure changes, only the user-visible changes.  We
could perhaps add a CAP_SYS_ADMIN-only sysctl for this hack, a'ka
/proc/sys/vm/swappiness, but even that looks quite counterproductive
when the generic approach is that we are trying to reduce the number of
external factors in the VM balance picture.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pcmcia: fix multiple insertion of multifunction cards
Dominik Brodowski [Mon, 1 Aug 2005 12:55:51 +0000]
[PATCH] pcmcia: fix multiple insertion of multifunction cards

The ordering of setting and clearing device_add_pending went wrong on some
occasions, causing multifunction cards only to be handled correctly on the
first insertion, not on subsequent ones.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] pcmcia: defer ide-cs initialization after other IDE drivers started up
Dominik Brodowski [Mon, 1 Aug 2005 12:16:55 +0000]
[PATCH] pcmcia: defer ide-cs initialization after other IDE drivers started up

Avoid registering PCMCIA CF cards before other IDE stuff. This means the risk
of /dev/hd* being re-ordered is lessened. The _sane_ thing to assert any
ordering is to use udev, nameif and so on, of course.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] inotify: fix race between the kernel and user space
John McCutchan [Mon, 1 Aug 2005 15:00:45 +0000]
[PATCH] inotify: fix race between the kernel and user space

When you rm a watch, an IN_IGNORED event is sent down the event queue
with the watch descriptor that you just rm'd.

If you then add a watch you could get the ignored watch's wd and if you
haven't read the entire event queue, user space will think that it's
newly created watch was just ignored.

To avoid this problem we just use idr_get_new_above instead of
idr_get_new.

Signed-off-by: John McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] inotify: fix file deletion by rename detection
John McCutchan [Mon, 1 Aug 2005 15:00:45 +0000]
[PATCH] inotify: fix file deletion by rename detection

When a file is moved over an existing file that you are watching,
inotify won't send you a DELETE_SELF event and it won't unref the inode
until the inotify instance is closed by the application.

Signed-off-by: John McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge head 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Sun, 31 Jul 2005 23:49:07 +0000]
Merge head 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

14 years agoMerge head 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Sun, 31 Jul 2005 23:48:39 +0000]
Merge head 'upstream-fixes' of /linux/kernel/git/jgarzik/libata-dev

14 years ago[PATCH] Display name of fbdev device
James Simmons [Sat, 30 Jul 2005 22:49:54 +0000]
[PATCH] Display name of fbdev device

This patch displays the name of the fbdev driver in sysfs.
Down the road this will replace the current proc handle we have.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] SMP fix for 6pack driver
Ralf Baechle [Mon, 4 Jul 2005 17:30:42 +0000]
[PATCH] SMP fix for 6pack driver

Drivers really only work well in SMP if they actually can be selected.
This is a leftover from the time when the 6pack drive only used to be
a bitrotten variant of the slip driver.

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>

 Kconfig |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] Fix OMAP specific typo in smc91x.h
Tony Lindgren [Thu, 30 Jun 2005 13:40:18 +0000]
[PATCH] Fix OMAP specific typo in smc91x.h

--ReaqsoxgOBHFXBhH
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

Hi Jeff,

Here's a little patch fixing a typo in smc91x.h.

Regards,

Tony

--ReaqsoxgOBHFXBhH
Content-Type: text/x-chdr; charset=us-ascii
Content-Disposition: inline; filename="patch-fix-typo-smc91x.h"
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] sk98lin: fix workaround for yukon-lite chipset (> rev 7)
Stephen Hemminger [Mon, 27 Jun 2005 22:47:25 +0000]
[PATCH] sk98lin: fix workaround for yukon-lite chipset (> rev 7)

Yukon-Lite chipset needs workaround for revision 7 (or later).
Without this patch, chip gets stuck in low power mode and never
boots. Newer SysKonnect vendor code already had same patch.

Related bug in skge is http://bugs.gentoo.org/87822

Chris, please add for 2.6.12.2

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] bonding: documentation update
Jay Vosburgh [Thu, 21 Jul 2005 19:18:02 +0000]
[PATCH] bonding: documentation update

Contains general updates (additional configuration info, hopefully
better examples, updated some out of date info, and a bonus pass
through ispell to banish the "paramters.") and info specific to
gratuitous ARP and xmit policy functionality already in 2.6.13-rc2.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] SCSI_SATA has to be a tristate
Adrian Bunk [Wed, 27 Jul 2005 08:06:35 +0000]
[PATCH] SCSI_SATA has to be a tristate

SCSI=m must disallow static drivers.

The problem is that all the SATA drivers depend on SCSI_SATA.

With SCSI=m and SCSI_SATA=y this allows the static enabling of the SATA
drivers with unwanted effects, e.g.:
- SCSI=m, SCSI_SATA=y, SCSI_ATA_ADMA=y
  -> SCSI_ATA_ADMA is built statically but scsi/built-in.o is not linked
     into the kernel
- SCSI=m, SCSI_SATA=y, SCSI_ATA_ADMA=y, SCSI_SATA_AHCI=m
  -> SCSI_ATA_ADMA and libata are built statically but
     scsi/built-in.o is not linked into the kernel,
     SCSI_SATA_AHCI is built modular (unresolved symbols due to missing
                                      libata)

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: version 0.8
Stephen Hemminger [Fri, 22 Jul 2005 23:26:11 +0000]
[PATCH] skge: version 0.8

Increase driver version to 0.8

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: led toggle cleanup
Stephen Hemminger [Fri, 22 Jul 2005 23:26:10 +0000]
[PATCH] skge: led toggle cleanup

Cleanup code that is used to toggle LED's. Since we
get called from ethtool, can use that thread rather than
setting up a timer.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: ignore phy interrupts during negotiation
Stephen Hemminger [Fri, 22 Jul 2005 23:26:09 +0000]
[PATCH] skge: ignore phy interrupts during negotiation

During autonegotiation set PHY interrupt mask to ignore
bogus speed change interrupts.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: fifo control register access fix
Stephen Hemminger [Fri, 22 Jul 2005 23:26:08 +0000]
[PATCH] skge: fifo control register access fix

The code to clear fifo errors was incorrect and sending garbage
to the external phy. Removed the no longer used inline's funcs.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: whitespace fixes
Stephen Hemminger [Fri, 22 Jul 2005 23:26:07 +0000]
[PATCH] skge: whitespace fixes

Minor whitespace cleanups.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: support yukon lite rev 4
Stephen Hemminger [Fri, 22 Jul 2005 23:26:06 +0000]
[PATCH] skge: support yukon lite rev 4

The check for Yukon lite changes was restricting itself to
rev A3. It turns out that these changes are also true on A4
and later.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: phy lock deadlock
Stephen Hemminger [Fri, 22 Jul 2005 23:26:05 +0000]
[PATCH] skge: phy lock deadlock

Cleanup the phy_lock deadlock because of relocking in the nway_reset path.
Reported by Francois Romieu.

Also, don't need to do irqsave/restore for blink,
just excluding bh is good enough.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: disable tranmitter on shutdown
Stephen Hemminger [Fri, 22 Jul 2005 23:26:04 +0000]
[PATCH] skge: disable tranmitter on shutdown

Here is a fix for a typo, thanks Eliot Dresselhaus.
Since transmitter not active when device is down, it wasn't really noticed.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: remove SK-9EE support
Stephen Hemminger [Fri, 22 Jul 2005 23:26:03 +0000]
[PATCH] skge: remove SK-9EE support

The SK-9E boards use the Marvell Yukon2 chipset which
is not supported by the skge driver. Thanks to Ralph Roesler
for noticing.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] skge: silence mac data parity messages
Stephen Hemminger [Fri, 22 Jul 2005 23:26:02 +0000]
[PATCH] skge: silence mac data parity messages

Using Genesis board, I get harmless error reports. Rather than console
error, turn it into a error counter.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[NET] Fix too aggressive backoff in dst garbage collection
Denis Lunev [Sun, 31 Jul 2005 00:47:25 +0000]
[NET] Fix too aggressive backoff in dst garbage collection

The bug is evident when it is seen once. dst gc timer was backed off,
when gc queue is not empty. But this means that timer quickly backs off,
if at least one destination remains in use. Normally, the bug is invisible,
because adding new dst entry to queue cancels the backoff. But it shots
deadly with destination cache overflow when new destinations are not released
for long time f.e. after an interface goes down.

The fix is to cancel backoff when something was released.

Signed-off-by: Denis Lunev <den@sw.ru>
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NET]: fix oops after tunnel module unload
Alexey Kuznetsov [Sun, 31 Jul 2005 00:46:44 +0000]
[NET]: fix oops after tunnel module unload

Tunnel modules used to obtain module refcount each time when
some tunnel was created, which meaned that tunnel could be unloaded
only after all the tunnels are deleted.

Since killing old MOD_*_USE_COUNT macros this protection has gone.
It is possible to return it back as module_get/put, but it looks
more natural and practically useful to force destruction of all
the child tunnels on module unload.

Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NETFILTER] Inherit masq_index to slave connections
Harald Welte [Sun, 31 Jul 2005 00:44:07 +0000]
[NETFILTER] Inherit masq_index to slave connections

masq_index is used for cleanup in case the interface address changes
(such as a dialup ppp link with dynamic addreses).  Without this patch,
slave connections are not evicted in such a case, since they don't inherit
masq_index.

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[NET]: Spelling mistakes threshoulds -> thresholds
Baruch Even [Sun, 31 Jul 2005 00:41:59 +0000]
[NET]: Spelling mistakes threshoulds -> thresholds

Just simple spelling mistake fixes.

Signed-Off-By: Baruch Even <baruch@ev-en.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years agoRevert "yenta free_irq on suspend"
Linus Torvalds [Sat, 30 Jul 2005 20:41:56 +0000]
Revert "yenta free_irq on suspend"

ACPI is wrong.  Devices should not release their IRQ's on suspend and
re-aquire them on resume.  ACPI should just re-init the IRQ controller
instead of breaking most drivers very subtly.

Breakage reported by Hugh Dickins <hugh@veritas.com>

Undo: d8c4b4195c7d664baf296818bf756775149232d3

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] sk98lin: basic suspend/resume support fixes
Rafael J. Wysocki [Sat, 30 Jul 2005 20:12:18 +0000]
[PATCH] sk98lin: basic suspend/resume support fixes

An early version of the sk98lin patch was merged via Len's tree.  But there
were subsequent updates as a result of review from Jeff.  THis fixes things
up.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] x86_64: avoid wasting IRQs patch update
Natalie.Protasevich@unisys.com [Sat, 30 Jul 2005 18:25:32 +0000]
[PATCH] x86_64: avoid wasting IRQs patch update

The patch adds boundary check for the MAX_GSI_NUM.  Same as the update for
i386, the patch addresses a problem with ACPI SCI IRQ.  The patch corrects
the code such that SCI IRQ is skipped and duplicate entry is avoided.  The
VIA chipset uses 4-bit IRQ register for internal interrupt routing, and
therefore cannot handle IRQ numbers assigned to its devices.  The patch
corrects this problem by allowing PCI IRQs below 16.

Signed-off-by: Natalie Protasevich <Natalie.Protasevich@unisys.com>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] revert bogus softirq changes
Andrew Morton [Sat, 30 Jul 2005 17:22:49 +0000]
[PATCH] revert bogus softirq changes

This snuck in with an x86_64 change.  Thanks to Richard Purdie
<rpurdie@rpsys.net> for spotting it.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lenb/to-linus
Linus Torvalds [Sat, 30 Jul 2005 17:15:57 +0000]
Merge /pub/scm/linux/kernel/git/lenb/to-linus

14 years ago[PATCH] vesafb: Document mtrr boot option usage
Antonino A. Daplas [Sat, 30 Jul 2005 05:59:21 +0000]
[PATCH] vesafb: Document mtrr boot option usage

Document mtrr boot option usage to Documentation/fb/vesafb.txt.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] x86_64: fix bug in csum_partial_copy_generic()
Dave Peterson [Sat, 30 Jul 2005 05:59:20 +0000]
[PATCH] x86_64: fix bug in csum_partial_copy_generic()

I was observing reproducible crashes on the "movw %bx,(%rsi)" instruction
below while a process in a recvfrom() system call was copying packet data
to user space.  The patch below fixes the exception table and causes the
crash to no longer reproduce.  Please apply.

Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: fix 44x early serial debug for configurations with more than 512M...
Eugene Surovegin [Sat, 30 Jul 2005 05:59:19 +0000]
[PATCH] ppc32: fix 44x early serial debug for configurations with more than 512M of RAM

Fix 44x early serial debugging for big RAM configurations (more than 512M).
 We cannot use default OpenBIOS virtual mapping, because it interferes with
pinned TLB entry.

While we are at it, move early UART mapping to TLB slot 0, so it can
survive longer during boot process (slot 1 is used by the first ioremap
call, effectively killing UART mapping if it occupies this slot).  Also,
change UART TLB entry size to 4K (256M is too much for a bunch of registers
:).  Squash some warnings on the way.

Tested on Ebony and Ocotea with 1G of RAM.

Thanks to Scott Coulter <scott.coulter@cyclone.com> for diagnosing this
problem.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] Fix NUMA node sizing in nr_free_zone_pages
Martin J. Bligh [Sat, 30 Jul 2005 05:59:18 +0000]
[PATCH] Fix NUMA node sizing in nr_free_zone_pages

We are iterating over all nodes in nr_free_zone_pages().  Because the
fallback zonelists contain all nodes in the system, and we walk all the
zonelists, we're counting memory multiple times (once for each node).  This
caused us to make a size estimate of 32GB for an 8GB AMD64 box, which makes
all the dirty ratio calculations, etc incorrect.

There's still a further bug to fix from e820 holes causing overestimation
as well, but this fix is separate, and good as is, and fixes one class of
problems.  Problem found by Badari, and tested by Ram Pai - thanks!

Signed-off-by: Martin J. Bligh <mbligh@mbligh.org>
Signed-off-by: Matt Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc64: inotify syscalls
Robert Love [Sat, 30 Jul 2005 05:59:17 +0000]
[PATCH] ppc64: inotify syscalls

inotify system call support for PPC64

[ I don't think we need sys32 compatibility versions--and if we do, I
failed in life. ]

Signed-off-by: Robert Love <rml@novell.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] ppc32: inotify syscalls
Robert Love [Sat, 30 Jul 2005 05:59:16 +0000]
[PATCH] ppc32: inotify syscalls

Add inotify system call stubs to PPC32.

Signed-off-by: Robert Love <rml@novell.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agomerge 2.6.13-rc4 with ACPI's to-linus tree
Len Brown [Sat, 30 Jul 2005 05:55:32 +0000]
merge 2.6.13-rc4 with ACPI's to-linus tree

14 years ago/home/lenb/src/to-linus branch 'acpi-2.6.12'
Len Brown [Sat, 30 Jul 2005 03:31:17 +0000]
/home/lenb/src/to-linus branch 'acpi-2.6.12'

14 years ago[ACPI] suspend/resume ACPI PCI Interrupt Links
David Shaohua Li [Thu, 28 Jul 2005 03:02:00 +0000]
[ACPI] suspend/resume ACPI PCI Interrupt Links

Add reference count and disable ACPI PCI Interrupt Link
when no device still uses it.

Warn when drivers have not released Link at suspend time.

http://bugzilla.kernel.org/show_bug.cgi?id=3469

Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

14 years ago[ACPI] delete boot-time printk()s from processor_idle.c
Venkatesh Pallipadi [Mon, 25 Apr 2005 18:38:00 +0000]
[ACPI] delete boot-time printk()s from processor_idle.c

http://bugzilla.kernel.org/show_bug.cgi?id=4401

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

14 years ago[ACPI] fix resume issues on Asus L5D
Rafael J. Wysocki [Sun, 24 Jul 2005 18:22:00 +0000]
[ACPI] fix resume issues on Asus L5D

http://bugzilla.kernel.org/show_bug.cgi?id=4416

Signed-off-by: Rafael J. Wysocki <rjwysocki@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>

14 years ago[ACPI] Always set P-state on initialization
Dominik Brodowski [Wed, 18 May 2005 17:49:00 +0000]
[ACPI] Always set P-state on initialization

Otherwise a platform that supports ACPI based cpufreq
and boots up at lowest possible speed could stay there
forever.  This because the governor may request max speed,
but the code doesn't update if there is no change in
speed, and it assumed the initial state of max speed.

http://bugzilla.kernel.org/show_bug.cgi?id=4634

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

14 years ago[ACPI] Add "ec_polling" boot option
Luming Yu [Sat, 23 Jul 2005 08:08:00 +0000]
[ACPI] Add "ec_polling" boot option

EC burst mode benefits many machines, some of
them significantly.  However, our current
implementation fails on some machines such
as Rafael's Asus L5D.

This patch restores the alternative EC polling code,
which can be enabled at boot time via "ec_polling"

http://bugzilla.kernel.org/show_bug.cgi?id=4665

Signed-off-by: Luming Yu <luming.yu@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

14 years ago[ACPI] address boot-freeze with updated DMI blacklist for c-states
David Shaohua Li [Wed, 22 Jun 2005 22:37:00 +0000]
[ACPI] address boot-freeze with updated DMI blacklist for c-states

http://bugzilla.kernel.org/show_bug.cgi?id=4763

Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

14 years ago[PATCH] agp: restore APBASE after setting APSIZE
Matthew Garrett [Fri, 29 Jul 2005 21:03:39 +0000]
[PATCH] agp: restore APBASE after setting APSIZE

When leaving S3 state, the AGP bridge may not have all PCI configuration
registers set in the same way as they were at boot.  This should be fixed
by pci_restore_state - however, the APBASE register cannot be set to
conflict with the APSIZE register.  If APSIZE is larger than it was before
suspend, pci_restore_state will not restore APBASE correctly.  The attached
patch adds an extra item to the agp_bridge_data structure and uses it to
store the value of APBASE.  On resume, this is then written after APSIZE
has been set.  This patch only touches the path used for Intel chipsets
without integrated graphics, and may need to be extended to work with the
others.

Without this patch, I get the symptoms described in bug 4921 - APBASE ends
up overlapping various PCI devices, and as a result they fail to work after
resume.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] s390: fix inline assembly in appldata
Gerald Schaefer [Fri, 29 Jul 2005 21:03:38 +0000]
[PATCH] s390: fix inline assembly in appldata

Fix inline assembly that gets miscompiled by gcc 4.

Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] s390: device recognition
Cornelia Huck [Fri, 29 Jul 2005 21:03:37 +0000]
[PATCH] s390: device recognition

Close a small window where a device may be not operational again after senseid
finished and the "same device" check fails due to dev=0000 by checking for dnv
after stsch() by then setting the device to not operational.  (No need to
check for dnv in ccw_device_handle_oper() again since we don't do stsch() into
the subchannel's schib in the meantime and will get a crw anyway if the device
becomes not oper again).

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] s390: check for interrupt before waiting
Heiko Carstens [Fri, 29 Jul 2005 21:03:36 +0000]
[PATCH] s390: check for interrupt before waiting

The patch that introduced waiting for interrupts after resetting the reader
can cause the boot to fail because the system is waiting for an interrupt that
will never arrive.  Add code to check if an interrupt is supposed to arrive
before waiting endlessly.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] s390: default configuration
Martin Schwidefsky [Fri, 29 Jul 2005 21:03:35 +0000]
[PATCH] s390: default configuration

Update default configuration of s390.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] uml: fix vsyscall brokenness
Jeff Dike [Fri, 29 Jul 2005 21:03:33 +0000]
[PATCH] uml: fix vsyscall brokenness

The #if/#ifdef cleanup exposed a bug in UML's ELF header processing.  With
this bug fixed, UML recognizes the vsyscall info coming from the host.  On
FC4, there is a vsyscall page low in the address space, which UML doesn't
provide.  This causes an infinite page fault loop and a hang on boot.

This patch works around that by making this look like a no-vsyscall system.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] fbdev: Replace memcpy with for-loop when preparing bitmap
Antonino A. Daplas [Fri, 29 Jul 2005 21:03:33 +0000]
[PATCH] fbdev: Replace memcpy with for-loop when preparing bitmap

Do not use memcpy in fb_pad_aligned_buffer.  It is suboptimal because only
a few bytes are moved at a time.  Replace with a for-loop.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] x86: avoid wasting IRQs patch update
Natalie.Protasevich@unisys.com [Fri, 29 Jul 2005 21:03:32 +0000]
[PATCH] x86: avoid wasting IRQs patch update

The patch addresses a problem with ACPI SCI interrupt entry, which gets
re-used, and the IRQ is assigned to another unrelated device.  The patch
corrects the code such that SCI IRQ is skipped and duplicate entry is
avoided.  Second issue came up with VIA chipset, the problem was caused by
original patch assigning IRQs starting 16 and up.  The VIA chipset uses
4-bit IRQ register for internal interrupt routing, and therefore cannot
handle IRQ numbers assigned to its devices.  The patch corrects this
problem by allowing PCI IRQs below 16.

Signed-off by: Natalie Protasevich <Natalie.Protasevich@unisys.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] vesafb: Fix mtrr bugs
Antonino A. Daplas [Fri, 29 Jul 2005 21:03:31 +0000]
[PATCH] vesafb: Fix mtrr bugs

>> vesafb: mode is 800x600x16, linelength=1600, pages=16
>> vesafb: scrolling: redraw
>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>> mtrr: type mismatch for fc000000,1000000 old: write-back new: write-
>> combining

Range is already set to write-back, vesafb attempts to add a write-combining
mtrr (default for vesafb).

>> mtrr: size and base must be multiples of 4 kiB

This is a bug, vesafb attempts to add a size < PAGE_SIZE triggering
the messages below.

To eliminate the warning messages, you can add the option mtrr:2 to add a
write-back mtrr for vesafb.  Or just use nomtrr option.

1. Fix algorithm for finding the best power of 2 size with mtrr_add().

2. Add option to choose the mtrr type by extending the mtrr boot option:

   mtrr:n where n

        0 = no mtrr (equivalent to using the nomtrr option)
        1 = uncachable
        2 = write back
        3 = write combining (default)
        4 = write through

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] serial: add MMIO support to 8250_pnp
Bjorn Helgaas [Fri, 29 Jul 2005 21:03:30 +0000]
[PATCH] serial: add MMIO support to 8250_pnp

Add support for UARTs in MMIO space and clean up a little whitespace.

HP legacy-free ia64 machines need this.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] Fix sync_tsc hang
Eric W. Biederman [Fri, 29 Jul 2005 21:03:29 +0000]
[PATCH] Fix sync_tsc hang

sync_tsc was using smp_call_function to ask the boot processor to report
it's tsc value.  smp_call_function performs an IPI_send_allbutself which is
a broadcast ipi.  There is a window during processor startup during which
the target cpu has started and before it has initialized it's interrupt
vectors so it can properly process an interrupt.  Receveing an interrupt
during that window will triple fault the cpu and do other nasty things.

Why cli does not protect us from that is beyond me.

The simple fix is to match ia64 and provide a smp_call_function_single.
Which avoids the broadcast and is more efficient.

This certainly fixes the problem of getting stuck on boot which was
very easy to trigger on my SMP Hyperthreaded Xeon, and I think
it fixes it for the right reasons.

Minor changes by AK

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] mm: Ensure proper alignment for node_remap_start_pfn
Ravikiran G Thirumalai [Fri, 29 Jul 2005 21:03:28 +0000]
[PATCH] mm: Ensure proper alignment for node_remap_start_pfn

While reserving KVA for lmem_maps of node, we have to make sure that
node_remap_start_pfn[] is aligned to a proper pmd boundary.
(node_remap_start_pfn[] gets its value from node_end_pfn[])

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Fri, 29 Jul 2005 21:40:08 +0000]
Merge /pub/scm/linux/kernel/git/davej/cpufreq

14 years ago[PATCH] USB: hidinput_hid_event() oops fix
Pete Zaitcev [Fri, 29 Jul 2005 19:18:34 +0000]
[PATCH] USB: hidinput_hid_event() oops fix

It seems that I see a bug in hidinput_hid_event.  The check for NULL can never
work, becaue &hidinput->input is nonzero at all times.

Cc: <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: fix in usb_calc_bus_time
Dan Streetman [Fri, 29 Jul 2005 19:18:28 +0000]
[PATCH] USB: fix in usb_calc_bus_time

This patch does the same swap, i.e. use the ISO macro if (isoc).
Additionally, it fixes the return value - the usb_calc_bus_time function
returns the time in nanoseconds (I didn't notice that before) while the
HS_USECS and HS_USECS_ISO are microseconds.  This fixes the function to
return nanoseconds always, and adjusts ehci-q.c (the only high-speed
caller of the function) to wrap the call in NS_TO_US().

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: fix Bug in usb-skeleton.c
Conger, Chris A [Fri, 29 Jul 2005 19:18:23 +0000]
[PATCH] USB: fix Bug in usb-skeleton.c

Compare endpoint address to USB_ENDPOINT_DIR_MASK to determine endpoint
direction...

From: "Conger, Chris A." <CHRIS.A.CONGER@saic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: add S3C24XX USB Host driver support
Ben Dooks [Fri, 29 Jul 2005 19:18:03 +0000]
[PATCH] USB: add S3C24XX USB Host driver support

USB (OHCI) Host driver for S3C2410/S3C2440 based systems

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: drivers/net/usb/zd1201.c: Gigabyte GN-WLBZ201 dongle usbid
Mathieu [Fri, 29 Jul 2005 19:17:29 +0000]
[PATCH] USB: drivers/net/usb/zd1201.c: Gigabyte GN-WLBZ201 dongle usbid

Gigabyte GN-WLBZ201 wifi usb dongle works very well, using the zd1201
driver. the only missing part is that the corresponding usbid is not
declared. The following patch should fix this.

From: "Mathieu" <matt@minas-morgul.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: Patch for KYOCERA AH-K3001V support
Masahito Omote [Fri, 29 Jul 2005 19:17:25 +0000]
[PATCH] USB: Patch for KYOCERA AH-K3001V support

This patch enables a support of KYOCERA AH-K3001V, one of the most
popular cell phone in Japan. This device has vendor specific ID but works
with acm driver by adding USB ID. This device already works on
FreeBSD and OS X by native USB ACM driver with USB ID added.

This device is probed as NO_UNION_NORMAL not to hang up when probing.

Signed-off-by: Masahito Omote <omote@utyuuzin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: ldusb fixes
Michael Hund [Fri, 29 Jul 2005 19:17:20 +0000]
[PATCH] USB: ldusb fixes

below you will find the forgotten kmalloc check (sorry).

Signed-off-by: Michael Hund <mhund@ld-didactic.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: Usbcore: Don't try to delete unregistered interfaces
Alan Stern [Fri, 29 Jul 2005 19:17:16 +0000]
[PATCH] USB: Usbcore: Don't try to delete unregistered interfaces

This patch handles a rarely-encountered failure mode in usbcore.  It's
legal for device_add to fail (although now it happens even more rarely
than before since failure to bind a driver is no longer fatal).  So when
we destroy the interfaces in a configuration, we shouldn't try to delete
ones which weren't successfully registered.  Also, failure to register an
interface shouldn't be fatal either -- I think; you may disagree about
this part of the patch.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: drivers/usb/net/: remove two unused multicast_filter_limit variables
Adrian Bunk [Fri, 29 Jul 2005 19:17:11 +0000]
[PATCH] USB: drivers/usb/net/: remove two unused multicast_filter_limit variables

The only uses of both variables were recently removed.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: usbfs: Don't leak uninitialized data
Alan Stern [Fri, 29 Jul 2005 19:16:58 +0000]
[PATCH] USB: usbfs: Don't leak uninitialized data

This patch fixes an information leak in the usbfs snoop facility:
uninitialized data from __get_free_page can be returned to userspace and
written to the system log.  It also improves the snoop output by printing
the wLength value.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: ftdi_sio: fix a couple of timeouts
Ian Abbott [Fri, 29 Jul 2005 19:16:52 +0000]
[PATCH] USB: ftdi_sio: fix a couple of timeouts

ftdi_sio: Fix timeouts in a couple of usb_control_msg() calls due to
change of units from jiffies to milliseconds in 2.6.12.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously
Ian Abbott [Fri, 29 Jul 2005 19:16:41 +0000]
[PATCH] USB: ftdi_sio: Update RTS and DTR simultaneously

ftdi_sio: Update RTS and DTR simultaneously, using a single control URB
instead of separate control URBs for RTS and DTR.  Reinhard Bergmann
observed time differences of up to 680 ms with his application on a
2.4.22 kernel when RTS and DTR were updated using separate control
URBs, which is unacceptable.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] USB: ftdi_sio: new microHAM and Evolution Robotics devices
Ian Abbott [Fri, 29 Jul 2005 19:16:31 +0000]
[PATCH] USB: ftdi_sio: new microHAM and Evolution Robotics devices

The attached patch adds the following new devices to the ftdi_sio driver:

* microHAM USB-Y6 and USB-Y8 devices submitted by Justin Burket (KL1RL).
* Evolution Robotics ER1 Control Module submitted by Shawn M.  Lavelle.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] PCI: fix up errors after dma bursting patch and CONFIG_PCI=n -- bug?
Kumar Gala [Fri, 29 Jul 2005 19:16:27 +0000]
[PATCH] PCI: fix up errors after dma bursting patch and CONFIG_PCI=n -- bug?

In the patch from:

http://www.uwsg.iu.edu/hypermail/linux/kernel/0506.3/0985.html

Is the the following line suppose inside the if CONFIG_PCI=n

  #define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] PCI: remove PCI_BRIDGE_CTL_VGA handling from setup-bus.c
Ivan Kokshaysky [Fri, 29 Jul 2005 19:16:22 +0000]
[PATCH] PCI: remove PCI_BRIDGE_CTL_VGA handling from setup-bus.c

The setup-bus code doesn't work correctly for configurations
with more than one display adapter in the same PCI domain.
This stuff actually is a leftover of an early 2.4 PCI setup code
and apparently it stopped working after some "bridge_ctl" changes.
So the best thing we can do is just to remove it and rely on the fact
that any firmware *has* to configure VGA port forwarding for the boot
display device properly.

But then we need to ensure that the bus->bridge_ctl will always
contain valid information collected at the probe time, therefore
the following change in pci_scan_bridge() is needed.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>