7 years agokbuild: Fix help text not displayed in choice option.
Srinivas Kandagatla [Tue, 2 Aug 2011 17:49:52 +0000]
kbuild: Fix help text not displayed in choice option.

commit 3f198dfee49d2e9c30583c62b0c79286c78c7b44 upstream.

Help text under choice menu is never displayed because it does not have
symbol name associated with it, however many kconfigs have help text
under choice, assuming that it will be displayed when user selects help.
for example in Kconfig if we have:
choice
        prompt "Choice"
        ---help---
           HELP TEXT ...

config A
        bool "A"

config B
        bool "B"

endchoice

Without this patch "HELP TEXT" is not displayed when user selects help
option when "Choice" is highlighted from menuconfig or xconfig or
gconfig.

This patch changes the logic in menu_get_ext_help to display help for
cases which dont have symbol names like choice.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Reviewed-by: Stuart Menefy <stuart.menefy@st.com>
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: set HPD polarity in hpd_init()
Alex Deucher [Thu, 3 Nov 2011 15:21:39 +0000]
drm/radeon/kms: set HPD polarity in hpd_init()

commit 64912e997f0fe13512e4c7b90e4f7c11cb922ab5 upstream.

Polarity needs to be set accordingly to connector status (connected
or disconnected). Set it up in hpd_init() so first hotplug works
reliably no matter what is the initial set of connector. hpd_init()
also covers resume so HPD will work correctly after resume as well.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: add MSI module parameter
Alex Deucher [Tue, 1 Nov 2011 18:20:30 +0000]
drm/radeon/kms: add MSI module parameter

commit a18cee15ed4c8b6a35f96b7b26a46bac32e04bd9 upstream.

Allow the user to override whether MSIs are enabled
or not on supported ASICs.  MSIs are disabled by default
on IGP chips as they tend not to work.  However certain
IGP chips only seem to work with MSIs enabled.

I suspect this is a chipset or bios issue, but I'm not sure
what the proper fix is.  This will at least make diagnosing
and working around the problem much easier.

See:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: Add MSI quirk for Dell RS690
Alex Deucher [Tue, 1 Nov 2011 18:14:18 +0000]
drm/radeon/kms: Add MSI quirk for Dell RS690

commit 01e718ec194e30b3e8eb3858c742c13649757efc upstream.

Some Dell laptops only seem to work with MSIs.  This
looks like a platform/bios bug.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: properly set panel mode for eDP
Alex Deucher [Mon, 31 Oct 2011 12:54:41 +0000]
drm/radeon/kms: properly set panel mode for eDP

commit 00dfb8df5bf8c3afe4c0bb8361133156b06b7a2c upstream.

This should make eDP more reliable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon: set hpd polarity at init time so hotplug detect works
Jerome Glisse [Fri, 28 Oct 2011 21:52:34 +0000]
drm/radeon: set hpd polarity at init time so hotplug detect works

commit 8ab250d4484b72ccc78e34276c5ffa84c1d41303 upstream.

Polarity needs to be set accordingly to connector status (connected
or disconnected). Set it up at module init so first hotplug works
reliably no matter what is the initial set of connector.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: Add MSI quirk for HP RS690
Alex Deucher [Tue, 25 Oct 2011 19:11:08 +0000]
drm/radeon/kms: Add MSI quirk for HP RS690

commit b362105f7f5223fa4d2e03ceeea0e51da754ccc6 upstream.

Some HP laptops only seem to work with MSIs.  This
looks like a platform/bios bug.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: split MSI check into a separate function
Alex Deucher [Tue, 25 Oct 2011 18:58:49 +0000]
drm/radeon/kms: split MSI check into a separate function

commit 8f6c25c59b0c895c68cae59d1b34e9a7b36971bc upstream.

This makes it easier to add quirks for certain systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon: avoid bouncing connector status btw disconnected & unknown
Jerome Glisse [Mon, 24 Oct 2011 22:16:34 +0000]
drm/radeon: avoid bouncing connector status btw disconnected & unknown

commit 340764465aa4a586ca332e61ae64883e5ad6f183 upstream.

Since force handling rework of d0d0a225e6ad43314c9aa7ea081f76adc5098ad4
we could end up bouncing connector status btw disconnected and unknown.
When connector status change a call to output_poll_changed happen which
in turn ask again for detect but with force set.

So set the load detect flags whenever we report the connector as
connected or unknown this avoid bouncing btw disconnected and unknown.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: Stefan Lippers-Hollmann <s.L-H@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Fix a regression for DMA-position check with CA0110
Takashi Iwai [Sun, 6 Nov 2011 12:49:13 +0000]
ALSA: hda - Fix a regression for DMA-position check with CA0110

commit 69f9ba9b0cad67bc03f0a096f7f274de795ca844 upstream.

The regression-fix in 3.1 for the check of DMA-position validity caused
yet another regression for CA0110.  As usual, this hardware seems working
only with LPIB properly.  Adding the appropriate driver-caps bit to force
LPIB fixes the problem.

Reported-and-tested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Fix silent output regression with ALC861
Takashi Iwai [Sun, 6 Nov 2011 10:25:34 +0000]
ALSA: hda - Fix silent output regression with ALC861

commit 43dea228a3ba5463392281535dfb3d3fe56f4c2c upstream.

The 3.1 kernel has a regression for ALC861 codec where no sound output
is heard with the default setup.  It's because the amps in DACs aren't
properly unmuted while the output mixers are assigned only to pins.

This patch fixes the missing initialization of DACs when no mixer is
assigned to them.

Tested-by: Andrea Iob <andrea_iob@yahoo.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda/realtek - Skip invalid digital out pins
Takashi Iwai [Thu, 3 Nov 2011 15:54:06 +0000]
ALSA: hda/realtek - Skip invalid digital out pins

commit 51e4152a969aa6d2306492ebf143932dcb535c9b upstream.

Some BIOS report invalid pins as digital output pins.  The driver checks
the connection but it doesn't do it fully correctly, and it leaves some
undefined value as the audio-out widget, which makes the driver spewing
warnings.  This patch fixes the issue.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=727348

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda/realtek - Don't create alt-stream for capture when unnecessary
Takashi Iwai [Wed, 2 Nov 2011 20:30:51 +0000]
ALSA: hda/realtek - Don't create alt-stream for capture when unnecessary

commit 1fa1757366783fb52e6e85c2d735db49b818d382 upstream.

When the driver finds multiple ADCs, it tries to create an alternative
capture PCM stream.  However, these secondary ADCs might be useless or
in uncontrolled paths in some cases, e.g. when auto-mic or dynamic
ADC-switching is enabled.  Also, when only a single capture source is
available, the multi-streams don't make sense, too.

With this patch, the driver checks such condition and skips the alt
stream appropriately.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Add support for 92HD65 / 92HD66 family of codecs
Charles Chin [Wed, 2 Nov 2011 06:56:58 +0000]
ALSA: hda - Add support for 92HD65 / 92HD66 family of codecs

commit ad5d8755116b431f0709c745ee17cb567a478d43 upstream.

These codecs have SPDIF-in, which is new to the 92HD83xxx compatible
families, so a bit of logic is added to support them.

Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Disable power-widget control for IDT 92HD83/93 as default
Charles Chin [Wed, 2 Nov 2011 06:53:30 +0000]
ALSA: hda - Disable power-widget control for IDT 92HD83/93 as default

commit 35c11777b906042eca9e6f1c03e464726c7faa07 upstream.

The power-widget control in patch_stac92hd83xxx() never worked properly,
thus it's safer to turn it off as default for now.

Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: ua101: fix crash when unplugging
Clemens Ladisch [Sat, 15 Oct 2011 21:19:25 +0000]
ALSA: ua101: fix crash when unplugging

commit 862a6244eb9f9f5123fe819454fcfcae0ee1f2f9 upstream.

If the device is unplugged while running, it is possible for a PCM
device to be closed after the disconnect callback has returned.  This
means that kill_stream_urb() and disable_iso_interface() would try to
access already-invalid or freed USB data structures.

The function free_usb_related_resources() was intended to prevent this,
but forgot to clear the affected variables.

Reported-and-tested-by: Olivier Courtay <olivier@courtay.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonet: Unlock sock before calling sk_free()
Thomas Gleixner [Tue, 25 Oct 2011 02:30:50 +0000]
net: Unlock sock before calling sk_free()

[ Upstream commit b0691c8ee7c28a72748ff32e91b165ec12ae4de6 ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agothp: share get_huge_page_tail()
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:36 +0000]
thp: share get_huge_page_tail()

commit b35a35b556f5e6b7993ad0baf20173e75c09ce8c upstream.

This avoids duplicating the function in every arch gup_fast.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agosparc: gup_pte_range() support THP based tail recounting
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:31 +0000]
sparc: gup_pte_range() support THP based tail recounting

commit e0d85a366c2300efd230ef82a9b22110b0658331 upstream.

Up to this point the code assumed old refcounting for hugepages (pre-thp).
 This updates the code directly to the thp mapcount tail page refcounting.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agos390: gup_huge_pmd() return 0 if pte changes
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:28 +0000]
s390: gup_huge_pmd() return 0 if pte changes

commit 0693bc9ce2cc4f6a1b9c3c05790fc149a74c0b87 upstream.

s390 didn't return 0 in that case, if it's rolling back the *nr pointer it
should also return zero to avoid adding pages to the array at the wrong
offset.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agos390: gup_huge_pmd() support THP tail recounting
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:25 +0000]
s390: gup_huge_pmd() support THP tail recounting

commit 220a2eb228d032acde60e9fd044ca802706ff583 upstream.

Up to this point the code assumed old refcounting for hugepages (pre-thp).
This updates the code directly to the thp mapcount tail page refcounting.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: gup_huge_pmd() return 0 if pte changes
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:19 +0000]
powerpc: gup_huge_pmd() return 0 if pte changes

commit cf592bf768c4fa40282b8fce58a80820065de2cb upstream.

powerpc didn't return 0 in that case, if it's rolling back the *nr pointer
it should also return zero to avoid adding pages to the array at the wrong
offset.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: gup_hugepte() support THP based tail recounting
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:15 +0000]
powerpc: gup_hugepte() support THP based tail recounting

commit 3526741f0964c88bc2ce511e1078359052bf225b upstream.

Up to this point the code assumed old refcounting for hugepages (pre-thp).
This updates the code directly to the thp mapcount tail page refcounting.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: gup_hugepte() avoid freeing the head page too many times
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:11 +0000]
powerpc: gup_hugepte() avoid freeing the head page too many times

commit 8596468487e2062cae2aad56e973784e03959245 upstream.

We only taken "refs" pins on the head page not "*nr" pins.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: get_hugepte() don't put_page() the wrong page
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:08 +0000]
powerpc: get_hugepte() don't put_page() the wrong page

commit 405e44f2e312dd5dd63e5a9f459bffcbcd4368ef upstream.

"page" may have changed to point to the next hugepage after the loop
completed, The references have been taken on the head page, so the
put_page must happen there too.

This is a longstanding issue pre-thp inclusion.

It's totally unclear how these page_cache_add_speculative and
pte_val(pte) != pte_val(*ptep) checks are necessary across all the
powerpc gup_fast code, when x86 doesn't need any of that: there's no way
the page can be freed with irq disabled so we're guaranteed the
atomic_inc will happen on a page with page_count > 0 (so not needing the
speculative check).

The pte check is also meaningless on x86: no need to rollback on x86 if
the pte changed, because the pte can still change a CPU tick after the
check succeeded and it won't be rolled back in that case.  The important
thing is we got a reference on a valid page that was mapped there a CPU
tick ago.  So not knowing the soft tlb refill code of ppc64 in great
detail I'm not removing the "speculative" page_count increase and the
pte checks across all the code, but unless there's a strong reason for
it they should be later cleaned up too.

If a pte can change from huge to non-huge (like it could happen with
THP) passing a pte_t *ptep to gup_hugepte() would also require to repeat
the is_hugepd in gup_hugepte(), but that shouldn't happen with hugetlbfs
only so I'm not altering that.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: remove superfluous PageTail checks on the pte gup_fast
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:03 +0000]
powerpc: remove superfluous PageTail checks on the pte gup_fast

commit 2839bdc1bfc0af76a2f0f11eca011590520a04fa upstream.

This part of gup_fast doesn't seem capable of handling hugetlbfs ptes,
those should be handled by gup_hugepd only, so these checks are
superfluous.

Plus if this wasn't a noop, it would have oopsed because, the insistence
of using the speculative refcounting would trigger a VM_BUG_ON if a tail
page was encountered in the page_cache_get_speculative().

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxHCI: Clear PLC for USB2 root hub ports
Andiry Xu [Fri, 23 Sep 2011 21:19:50 +0000]
xHCI: Clear PLC for USB2 root hub ports

commit 6fd4562178508a0949c9fdecd8558d8b10d671bd upstream.

When the link state changes, xHC will report a port status change event
and set the PORT_PLC bit, for both USB3 and USB2 root hub ports.

The PLC will be cleared by usbcore for USB3 root hub ports, but not for
USB2 ports, because they do not report USB_PORT_STAT_C_LINK_STATE in
wPortChange.

Clear it for USB2 root hub ports in handle_port_status().

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxHCI: test and clear RWC bit
Andiry Xu [Fri, 23 Sep 2011 21:19:49 +0000]
xHCI: test and clear RWC bit

commit d2f52c9e585bbb1a3c164e02b8dcd0d996c67353 upstream.

Introduce xhci_test_and_clear_bit() to clear RWC bit in PORTSC register.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxhci: If no endpoints changed, don't issue BW command.
Sarah Sharp [Fri, 2 Sep 2011 18:05:40 +0000]
xhci: If no endpoints changed, don't issue BW command.

commit 2dc3753997f3c80ce8b950242ab9bb3fb936acfd upstream.

Some alternate interface settings have no endpoints associated with them.
This shows up in some USB webcams, particularly the Logitech HD 1080p,
which uses the uvcvideo driver.  If a driver switches between two alt
settings with no endpoints, there is no need to issue a configure endpoint
command, because there is no endpoint information to update.

The only time a configure endpoint command with just the add slot flag set
makes sense is when the driver is updating hub characteristics in the slot
context.  However, that code never calls xhci_check_bandwidth, so we
should be safe not issuing a command if only the slot context add flag is
set.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousb_storage: Don't freeze in usb-stor-scan
Seth Forshee [Tue, 26 Jul 2011 14:56:07 +0000]
usb_storage: Don't freeze in usb-stor-scan

commit f02fe890ece7d695a5744b20525d45312382e6e4 upstream.

Scanning cannot be run during suspend or hibernation, but if
usb-stor-scan freezes another thread waiting on scanning to
complete may fail to freeze.

However, if usb-stor-scan is left freezable without ever actually
freezing then the freezer will wait on it to exit, and threads
waiting for scanning to finish will no longer be blocked. One
problem with this approach is that usb-stor-scan has a delay to
wait for devices to settle (which is currently the only point where
it can freeze). To work around this we can request that the freezer
send a fake signal when freezing, then use interruptible sleep to
wake the thread early when freezing happens.

To make this happen, the following changes are made to
usb-stor-scan:

 * Use set_freezable_with_signal() instead of set_freezable() to
   request a fake signal when freezing

 * Use wait_event_interruptible_timeout() instead of
   wait_event_freezable_timeout() to avoid freezing

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: fix race in xattr block allocation path
Eric Sandeen [Sat, 29 Oct 2011 14:15:35 +0000]
ext4: fix race in xattr block allocation path

commit 6d6a435190bdf2e04c9465cde5bdc3ac68cf11a4 upstream.

Ceph users reported that when using Ceph on ext4, the filesystem
would often become corrupted, containing inodes with incorrect
i_blocks counters.

I managed to reproduce this with a very hacked-up "streamtest"
binary from the Ceph tree.

Ceph is doing a lot of xattr writes, to out-of-inode blocks.
There is also another thread which does sync_file_range and close,
of the same files.  The problem appears to happen due to this race:

sync/flush thread               xattr-set thread
-----------------               ----------------

do_writepages                   ext4_xattr_set
ext4_da_writepages              ext4_xattr_set_handle
mpage_da_map_blocks             ext4_xattr_block_set
        set DELALLOC_RESERVE
                                ext4_new_meta_blocks
                                        ext4_mb_new_blocks
                                                if (!i_delalloc_reserved_flag)
                                                        vfs_dq_alloc_block
ext4_get_blocks
down_write(i_data_sem)
        set i_delalloc_reserved_flag
...
up_write(i_data_sem)
                                        if (i_delalloc_reserved_flag)
                                                vfs_dq_alloc_block_nofail

In other words, the sync/flush thread pops in and sets
i_delalloc_reserved_flag on the inode, which makes the xattr thread
think that it's in a delalloc path in ext4_new_meta_blocks(),
and add the block for a second time, after already having added
it once in the !i_delalloc_reserved_flag case in ext4_mb_new_blocks

The real problem is that we shouldn't be using the DELALLOC_RESERVED
state flag, and instead we should be passing
EXT4_GET_BLOCKS_DELALLOC_RESERVE down to ext4_map_blocks() instead of
using an inode state flag.  We'll fix this for now with using
i_data_sem to prevent this race, but this is really not the right way
to fix things.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: let ext4_page_mkwrite stop started handle in failure
Yongqiang Yang [Wed, 26 Oct 2011 09:00:19 +0000]
ext4: let ext4_page_mkwrite stop started handle in failure

commit fcbb5515825f1bb20b7a6f75ec48bee61416f879 upstream.

The started journal handle should be stopped in failure case.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: call ext4_handle_dirty_metadata with correct inode in ext4_dx_add_entry
Theodore Ts'o [Wed, 31 Aug 2011 16:02:51 +0000]
ext4: call ext4_handle_dirty_metadata with correct inode in ext4_dx_add_entry

commit 5930ea643805feb50a2f8383ae12eb6f10935e49 upstream.

ext4_dx_add_entry manipulates bh2 and frames[0].bh, which are two buffer_heads
that point to directory blocks assigned to the directory inode.  However, the
function calls ext4_handle_dirty_metadata with the inode of the file that's
being added to the directory, not the directory inode itself.  Therefore,
correct the code to dirty the directory buffers with the directory inode, not
the file inode.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: ext4_mkdir should dirty dir_block with newly created directory inode
Darrick J. Wong [Wed, 31 Aug 2011 16:00:51 +0000]
ext4: ext4_mkdir should dirty dir_block with newly created directory inode

commit f9287c1f2d329f4d78a3bbc9cf0db0ebae6f146a upstream.

ext4_mkdir calls ext4_handle_dirty_metadata with dir_block and the inode "dir".
Unfortunately, dir_block belongs to the newly created directory (which is
"inode"), not the parent directory (which is "dir").  Fix the incorrect
association.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: ext4_rename should dirty dir_bh with the correct directory
Darrick J. Wong [Wed, 31 Aug 2011 15:58:51 +0000]
ext4: ext4_rename should dirty dir_bh with the correct directory

commit bcaa992975041e40449be8c010c26192b8c8b409 upstream.

When ext4_rename performs a directory rename (move), dir_bh is a
buffer that is modified to update the '..' link in the directory being
moved (old_inode).  However, ext4_handle_dirty_metadata is called with
the old parent directory inode (old_dir) and dir_bh, which is
incorrect because dir_bh does not belong to the parent inode.  Fix
this error.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext2,ext3,ext4: don't inherit APPEND_FL or IMMUTABLE_FL for new inodes
Theodore Ts'o [Wed, 31 Aug 2011 15:54:51 +0000]
ext2,ext3,ext4: don't inherit APPEND_FL or IMMUTABLE_FL for new inodes

commit 1cd9f0976aa4606db8d6e3dc3edd0aca8019372a upstream.

This doesn't make much sense, and it exposes a bug in the kernel where
attempts to create a new file in an append-only directory using
O_CREAT will fail (but still leave a zero-length file).  This was
discovered when xfstests #79 was generalized so it could run on all
file systems.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/power/ds2780_battery.c: fix deadlock upon insertion and removal
Clifton Barnes [Wed, 2 Nov 2011 20:39:55 +0000]
drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal

commit 0e053fcbbbc4d945247cb32cad2767b483cb65f8 upstream.

Fixes the deadlock when inserting and removing the ds2780.

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/power/ds2780_battery.c: add a nolock function to w1 interface
Clifton Barnes [Wed, 2 Nov 2011 20:39:52 +0000]
drivers/power/ds2780_battery.c: add a nolock function to w1 interface

commit 9fe678fa2feb4aaac0b4220de63e1b7f8ccebae6 upstream.

Adds a nolock function to the w1 interface to avoid locking the
mutex if needed.

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/power/ds2780_battery.c: create central point for calling w1 interface
Clifton Barnes [Wed, 2 Nov 2011 20:39:50 +0000]
drivers/power/ds2780_battery.c: create central point for calling w1 interface

commit 853eee72f74f449797f0500ea19fc1bf497428d8 upstream.

Simply creates one point to call the w1 interface.

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agohwspinlock/core: use a mutex to protect the radix tree
Juan Gutierrez [Tue, 6 Sep 2011 06:30:16 +0000]
hwspinlock/core: use a mutex to protect the radix tree

commit 93b465c2e186d96fb90012ba0f9372eb9952e732 upstream.

Since we're using non-atomic radix tree allocations, we
should be protecting the tree using a mutex and not a
spinlock.

Non-atomic allocations and process context locking is good enough,
as the tree is manipulated only when locks are registered/
unregistered/requested/freed.

The locks themselves are still protected by spinlocks of course,
and mutexes are not involved in the locking/unlocking paths.

Signed-off-by: Juan Gutierrez <jgutierrez@ti.com>
[ohad@wizery.com: rewrite the commit log, #include mutex.h, add minor
commentary]
[ohad@wizery.com: update register/unregister parts in hwspinlock.txt]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/net/rionet.c: fix ethernet address macros for LE platforms
Alexandre Bounine [Wed, 2 Nov 2011 20:39:15 +0000]
drivers/net/rionet.c: fix ethernet address macros for LE platforms

commit e0c87bd95e8dad455c23bc56513af8dcb1737e55 upstream.

Modify Ethernet addess macros to be compatible with BE/LE platforms

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Add missing static ADC tables for ALC269 quirks
Takashi Iwai [Thu, 3 Nov 2011 14:56:55 +0000]
ALSA: hda - Add missing static ADC tables for ALC269 quirks

[There is no upstream commit for this patch since the corresponding
code was removed from 3.2 kernel.  This is a regression found only in
3.1 kernel, so please apply this only to 3.1.x series.]

Some ALC269 quirks define their own .cap_mixer field but without the
static adc_nids[].  This resulted in the mismatch of ADC because ALC269
may have the widget 0x07 for another audio-in, and the auto-parser picks
this up instead.

This patch fixes the problem by adding the static adc_nids[] and co
again to these entries.

Tested-by: Chris Vine <chris@cvine.freeserve.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agobinfmt_elf: fix PIE execution with randomization disabled
Jiri Kosina [Wed, 2 Nov 2011 20:37:41 +0000]
binfmt_elf: fix PIE execution with randomization disabled

commit a3defbe5c337dbc6da911f8cc49ae3cc3b49b453 upstream.

The case of address space randomization being disabled in runtime through
randomize_va_space sysctl is not treated properly in load_elf_binary(),
resulting in SIGKILL coming at exec() time for certain PIE-linked binaries
in case the randomization has been disabled at runtime prior to calling
exec().

Handle the randomize_va_space == 0 case the same way as if we were not
supporting .text randomization at all.

Based on original patch by H.J. Lu and Josh Boyer.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: H.J. Lu <hongjiu.lu@intel.com>
Cc: <stable@kernel.org>
Tested-by: Josh Boyer <jwboyer@redhat.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomm: thp: tail page refcounting fix
Andrea Arcangeli [Wed, 2 Nov 2011 20:36:59 +0000]
mm: thp: tail page refcounting fix

commit 70b50f94f1644e2aa7cb374819cfd93f3c28d725 upstream.

Michel while working on the working set estimation code, noticed that
calling get_page_unless_zero() on a random pfn_to_page(random_pfn)
wasn't safe, if the pfn ended up being a tail page of a transparent
hugepage under splitting by __split_huge_page_refcount().

He then found the problem could also theoretically materialize with
page_cache_get_speculative() during the speculative radix tree lookups
that uses get_page_unless_zero() in SMP if the radix tree page is freed
and reallocated and get_user_pages is called on it before
page_cache_get_speculative has a chance to call get_page_unless_zero().

So the best way to fix the problem is to keep page_tail->_count zero at
all times.  This will guarantee that get_page_unless_zero() can never
succeed on any tail page.  page_tail->_mapcount is guaranteed zero and
is unused for all tail pages of a compound page, so we can simply
account the tail page references there and transfer them to
tail_page->_count in __split_huge_page_refcount() (in addition to the
head_page->_mapcount).

While debugging this s/_count/_mapcount/ change I also noticed get_page is
called by direct-io.c on pages returned by get_user_pages.  That wasn't
entirely safe because the two atomic_inc in get_page weren't atomic.  As
opposed to other get_user_page users like secondary-MMU page fault to
establish the shadow pagetables would never call any superflous get_page
after get_user_page returns.  It's safer to make get_page universally safe
for tail pages and to use get_page_foll() within follow_page (inside
get_user_pages()).  get_page_foll() is safe to do the refcounting for tail
pages without taking any locks because it is run within PT lock protected
critical sections (PT lock for pte and page_table_lock for
pmd_trans_huge).

The standard get_page() as invoked by direct-io instead will now take
the compound_lock but still only for tail pages.  The direct-io paths
are usually I/O bound and the compound_lock is per THP so very
finegrined, so there's no risk of scalability issues with it.  A simple
direct-io benchmarks with all lockdep prove locking and spinlock
debugging infrastructure enabled shows identical performance and no
overhead.  So it's worth it.  Ideally direct-io should stop calling
get_page() on pages returned by get_user_pages().  The spinlock in
get_page() is already optimized away for no-THP builds but doing
get_page() on tail pages returned by GUP is generally a rare operation
and usually only run in I/O paths.

This new refcounting on page_tail->_mapcount in addition to avoiding new
RCU critical sections will also allow the working set estimation code to
work without any further complexity associated to the tail page
refcounting with THP.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotg3: fix tigon3_dma_hwbug_workaround()
Eric Dumazet [Sat, 22 Oct 2011 07:29:53 +0000]
tg3: fix tigon3_dma_hwbug_workaround()

[ Upstream commit f7ff19871bb4a3451e1ca2cf660bf633018cfbec ]

Ari got kernel panics using tg3 NIC, and bisected to 2669069aacc9 "tg3:
enable transmit time stamping."

This is because tigon3_dma_hwbug_workaround() might alloc a new skb and
free the original. We panic when skb_tx_timestamp() is called on freed
skb.

Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoipv6: fix route error binding peer in func icmp6_dst_alloc
Gao feng [Fri, 28 Oct 2011 02:46:57 +0000]
ipv6: fix route error binding peer in func icmp6_dst_alloc

[ Upstream commit 7011687f0f2f12cc348f6a693fafe63d89167eac ]

in func icmp6_dst_alloc,dst_metric_set call ipv6_cow_metrics to set metric.
ipv6_cow_metrics may will call rt6_bind_peer to set rt6_info->rt6i_peer.
So,we should move ipv6_addr_copy before dst_metric_set to make sure rt6_bind_peer success.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoipv4: fix ipsec forward performance regression
Yan, Zheng [Sat, 22 Oct 2011 21:58:20 +0000]
ipv4: fix ipsec forward performance regression

[ Upstream commit b73233960a59ee66e09d642f13d0592b13651e94 ]

There is bug in commit 5e2b61f(ipv4: Remove flowi from struct rtable).
It makes xfrm4_fill_dst() modify wrong data structure.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reported-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agojsm: remove buggy write queue
Thadeu Lima de Souza Cascardo [Wed, 24 Aug 2011 16:14:22 +0000]
jsm: remove buggy write queue

commit 9d898966c4a07e4a5092215b5a2829d0ef02baa2 upstream.

jsm uses a write queue that copies from uart_core circular buffer. This
copying however has some bugs, like not wrapping the head counter. Since
this write queue is also a circular buffer, the consumer function is
ready to use the uart_core circular buffer directly.

This buggy copying function was making some bytes be dropped when
transmitting to a raw tty, doing something like this.

[root@hostname ~]$ cat /dev/ttyn1 > cascardo/dump &
[1] 2658
[root@hostname ~]$ cat /proc/tty/drivers > /dev/ttyn0
[root@hostname ~]$ cat /proc/tty/drivers
/dev/tty             /dev/tty        5       0 system:/dev/tty
/dev/console         /dev/console    5       1 system:console
/dev/ptmx            /dev/ptmx       5       2 system
/dev/vc/0            /dev/vc/0       4       0 system:vtmaster
jsm                  /dev/ttyn     250 0-31 serial
serial               /dev/ttyS       4 64-95 serial
hvc                  /dev/hvc      229 0-7 system
pty_slave            /dev/pts      136 0-1048575 pty:slave
pty_master           /dev/ptm      128 0-1048575 pty:master
unknown              /dev/tty        4 1-63 console
[root@hostname ~]$ cat cascardo/dump
/dev/tty             /dev/tty        5       0 system:/dev/tty
/dev/console         /dev/console    5       1 system:console
/dev/ptmx            /dev/ptmx       5       2 system
/dev/vc/0            /dev/vc/0       4       0 system:vtmaste[root@hostname ~]$

This patch drops the driver write queue entirely, using the circular
buffer from uart_core only.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoOMAP: SPI: Fix the trying to free nonexistent resource error
Shubhrajyoti D [Mon, 24 Oct 2011 10:24:24 +0000]
OMAP: SPI: Fix the trying to free nonexistent resource error

commit 1458d160de3f1862aeaac57447ba96e7857ac52b upstream.

Currently there is a request_mem_region(r->start, ..
followed by r->start += pdata->regs_offset;

And then in remove

   r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
   release_mem_region(r->start, resource_size(r));

Here the offset addition is not taken care. Fix the code for the
same.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoum: Fix kmalloc argument order in um/vdso/vma.c
Dave Jones [Mon, 24 Oct 2011 22:15:32 +0000]
um: Fix kmalloc argument order in um/vdso/vma.c

commit 0d65ede0a605d6252acc5c8a9c536c4cd0211f3c upstream.

kmalloc size is 1st arg, not second.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoreadlinkat: ensure we return ENOENT for the empty pathname for normal lookups
Andy Whitcroft [Wed, 2 Nov 2011 08:44:39 +0000]
readlinkat: ensure we return ENOENT for the empty pathname for normal lookups

commit 1fa1e7f615f4d3ae436fa319af6e4eebdd4026a8 upstream.

Since the commit below which added O_PATH support to the *at() calls, the
error return for readlink/readlinkat for the empty pathname has switched
from ENOENT to EINVAL:

  commit 65cfc6722361570bfe255698d9cd4dccaf47570d
  Author: Al Viro <viro@zeniv.linux.org.uk>
  Date:   Sun Mar 13 15:56:26 2011 -0400

    readlinkat(), fchownat() and fstatat() with empty relative pathnames

This is both unexpected for userspace and makes readlink/readlinkat
inconsistant with all other interfaces; and inconsistant with our stated
return for these pathnames.

As the readlinkat call does not have a flags parameter we cannot use the
AT_EMPTY_PATH approach used in the other calls.  Therefore expose whether
the original path is infact entry via a new user_path_at_empty() path
lookup function.  Use this to determine whether to default to EINVAL or
ENOENT for failures.

Addresses http://bugs.launchpad.net/bugs/817187

[akpm@linux-foundation.org: remove unused getname_flags()]
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoum: fix ubd cow size
Richard Weinberger [Wed, 2 Nov 2011 12:17:27 +0000]
um: fix ubd cow size

commit 8535639810e578960233ad39def3ac2157b0c3ec upstream.

ubd_file_size() cannot use ubd_dev->cow.file because at this time
ubd_dev->cow.file is not initialized.
Therefore, ubd_file_size() will always report a wrong disk size when
COW files are used.
Reading from /dev/ubd* would crash the kernel.

We have to read the correct disk size from the COW file's backing
file.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoiwlagn: do not use interruptible waits
Johannes Berg [Thu, 15 Sep 2011 18:46:52 +0000]
iwlagn: do not use interruptible waits

commit effd4d9aece9184f526e6556786a94d335e38b71 upstream.

Since the dawn of its time, iwlwifi has used
interruptible waits to wait for synchronous
commands and firmware loading.

This leads to "interesting" bugs, because it
can't actually handle the interruptions; for
example when a command sending is interrupted
it will assume the command completed fully,
and then leave it pending, which leads to all
kinds of trouble when the command finishes
later.

Since there's no easy way to gracefully deal
with interruptions, fix the driver to not use
interruptible waits.

This at least fixes the error
iwlagn 0000:02:00.0: Error: Response NULL in  'REPLY_SCAN_ABORT_CMD'

I have seen in P2P testing, but it is likely
that there are other errors caused by this.

Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoALSA: hda - Fix ADC input-amp handling for Cx20549 codec
Takashi Iwai [Fri, 14 Oct 2011 13:26:20 +0000]
ALSA: hda - Fix ADC input-amp handling for Cx20549 codec

commit 6b45214277bec2193ad3ccb8d7aa6100b5a0f1a9 upstream.

It seems that Conexant CX20549 chip handle only a single input-amp even
though the audio-input widget has multiple sources.  This has been never
clear, and I implemented in the current way based on the debug information
I got at the early time -- the device reacts individual input-amp values
for different sources.  This is true for another Conexant codec, but it's
not applied to CX20549 actually.

This patch changes the auto-parser code to handle a single input-amp
per audio-in widget for CX20549.  After applying this, you'll see only a
single "Capture" volume control instead of separate "Mic" or "Line"
captures when the device is set up to use a single ADC.

We haven't tested 20551 and 20561 codecs yet.  If these show the similar
behavior like 20549, they need to set spec->single_adc_amp=1, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomm: avoid null pointer access in vm_struct via /proc/vmallocinfo
Mitsuo Hayasaka [Tue, 1 Nov 2011 00:08:13 +0000]
mm: avoid null pointer access in vm_struct via /proc/vmallocinfo

commit f5252e009d5b87071a919221e4f6624184005368 upstream.

The /proc/vmallocinfo shows information about vmalloc allocations in
vmlist that is a linklist of vm_struct.  It, however, may access pages
field of vm_struct where a page was not allocated.  This results in a null
pointer access and leads to a kernel panic.

Why this happens: In __vmalloc_node_range() called from vmalloc(), newly
allocated vm_struct is added to vmlist at __get_vm_area_node() and then,
some fields of vm_struct such as nr_pages and pages are set at
__vmalloc_area_node().  In other words, it is added to vmlist before it is
fully initialized.  At the same time, when the /proc/vmallocinfo is read,
it accesses the pages field of vm_struct according to the nr_pages field
at show_numa_info().  Thus, a null pointer access happens.

The patch adds the newly allocated vm_struct to the vmlist *after* it is
fully initialized.  So, it can avoid accessing the pages field with
unallocated page when show_numa_info() is called.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoARM: mach-ux500: unlock I&D l2x0 caches before init
Linus Walleij [Fri, 12 Aug 2011 11:54:42 +0000]
ARM: mach-ux500: unlock I&D l2x0 caches before init

commit 1bf6d2c1bb23533af6930581cc39b74685bc29de upstream.

Apparently U8500 U-Boot versions may leave the l2x0 locked down
before executing the kernel. Make sure we unlock it before we
initialize the l2x0. This fixes a performance problem reported
by Jan Rinze.

The l2x0 core has been modified to unlock the l2x0 by default,
but it will not touch the locking registers if the l2x0 was
already enabled, as on the ux500, so we need this quirk to
make sure it is properly turned off.

Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Adrian Bunk <adrian.bunk@movial.com>
Reported-by: Jan Rinze <janrinze@gmail.com>
Tested-by: Robert Marklund <robert.marklund@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoARM: pxa/cm-x300: properly set bt_reset pin
Axel Lin [Sat, 17 Sep 2011 14:15:34 +0000]
ARM: pxa/cm-x300: properly set bt_reset pin

commit 1a64200ec5e93be03e27c3b2fc332e04ae443eb2 upstream.

Fix below build warning and properly set bt_reset pin.

CC arch/arm/mach-pxa/cm-x300.o
arch/arm/mach-pxa/cm-x300.c: In function 'cm_x300_init_wi2wi':
arch/arm/mach-pxa/cm-x300.c:779: warning: unused variable 'wlan_en'
arch/arm/mach-pxa/cm-x300.c:795: warning: 'bt_reset' may be used uninitialized in this function

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoplat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Paul Fertser [Mon, 10 Oct 2011 07:19:23 +0000]
plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired

commit 6571534b600b8ca1936ff5630b9e0947f21faf16 upstream.

To configure pads during the initialisation a set of special constants
is used, e.g.
#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)

The problem is that no pull-up/down is getting activated unless both
PAD_CTL_PUE (pull-up enable) and PAD_CTL_PKE (pull/keeper module
enable) set. This is clearly stated in the i.MX25 datasheet and is
confirmed by the measurements on hardware. This leads to some rather
hard to understand bugs such as misdetecting an absent ethernet PHY (a
real bug i had), unstable data transfer etc. This might affect mx25,
mx35, mx50, mx51 and mx53 SoCs.

It's reasonable to expect that if the pullup value is specified, the
intention was to have it actually active, so we implicitly add the
needed bits.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomd/raid10: Fix bug when activating a hot-spare.
NeilBrown [Mon, 31 Oct 2011 01:59:44 +0000]
md/raid10: Fix bug when activating a hot-spare.

commit 7fcc7c8acf0fba44d19a713207af7e58267c1179 upstream.

This is a fairly serious bug in RAID10.

When a RAID10 array is degraded and a hot-spare is activated, the
spare does not take up the empty slot, but rather replaces the first
working device.
This is likely to make the array non-functional.   It would normally
be possible to recover the data, but that would need care and is not
guaranteed.

This bug was introduced in commit
   2bb77736ae5dca0a189829fbb7379d43364a9dac
which first appeared in 3.1.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years ago/proc/self/numa_maps: restore "huge" tag for hugetlb vmas
Andrew Morton [Tue, 1 Nov 2011 00:06:32 +0000]
/proc/self/numa_maps: restore "huge" tag for hugetlb vmas

commit fc360bd9cdcf875639a77f07fafec26699c546f3 upstream.

The display of the "huge" tag was accidentally removed in 29ea2f698 ("mm:
use walk_page_range() instead of custom page table walking code").

Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Stephen Wilson <wilsons@start.ca>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotuner_xc2028: Allow selection of the frequency adjustment code for XC3028
Mauro Carvalho Chehab [Thu, 28 Jul 2011 19:38:54 +0000]
tuner_xc2028: Allow selection of the frequency adjustment code for XC3028

commit 9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e upstream.

This device is not using the proper demod IF. Instead of using the
IF macro, it is specifying a IF frequency. This doesn't work, as xc3028
needs to load an specific SCODE for the tuner. In this case, there's
no IF table for 5 MHz.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodib0700: protect the dib0700 buffer access
Olivier Grenie [Mon, 1 Aug 2011 15:45:58 +0000]
dib0700: protect the dib0700 buffer access

commit bff469f4167fdabfe15294f375577d7eadbaa1bb upstream.

This patch protects the common buffer access inside the dib0700 in order
to manage concurrent access. This protection is done using mutex.

Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
[mchehab@redhat.com: dprint requires 3 arguments. Replaced by dib_info]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoDiBcom: protect the I2C bufer access
Patrick Boettcher [Wed, 3 Aug 2011 15:08:21 +0000]
DiBcom: protect the I2C bufer access

commit 79fcce3230b140f7675f8529ee53fe2f9644f902 upstream.

This patch protects the I2C buffer access in order to manage concurrent
access. This protection is done using mutex.
Furthermore, for the dib9000, if a pid filtering command is
received during the tuning, this pid filtering command is delayed to
avoid any concurrent access issue.

Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <Patrick.Boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoviafb: improve pitch handling
Florian Tobias Schandinat [Mon, 6 Jun 2011 01:27:34 +0000]
viafb: improve pitch handling

commit 936a3f770b8de7042d793272f008ef1bb08522e9 upstream.

This patch adds checks for minimum and maximum pitch size to prevent
invalid settings which could otherwise crash the machine. Also the
alignment is done in a slightly more readable way.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoviafb: use display information in info not in var for panning
Florian Tobias Schandinat [Mon, 23 May 2011 21:39:58 +0000]
viafb: use display information in info not in var for panning

commit d933990c57b498c092ceef591c7c5d69dbfe9f30 upstream.

As Laurent pointed out we must not use any information in the passed
var besides xoffset, yoffset and vmode as otherwise applications
might abuse it. Also use the aligned fix.line_length and not the
(possible) unaligned xres_virtual.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agofb: sh-mobile: Fix deadlock risk between lock_fb_info() and console_lock()
Bruno Prémont [Fri, 2 Sep 2011 17:24:03 +0000]
fb: sh-mobile: Fix deadlock risk between lock_fb_info() and console_lock()

commit 4a47a0e09c504e3ce0ccdb405411aefc5b09deb8 upstream.

Following on Herton's patch "fb: avoid possible deadlock caused by
fb_set_suspend" which moves lock_fb_info() out of fb_set_suspend()
to its callers, correct sh-mobile's locking around call to
fb_set_suspend() and the same sort of deaklocks with console_lock()
due to order of taking the lock.

console_lock() must be taken while fb_info is already locked and fb_info
must be locked while calling fb_set_suspend().

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agofb: avoid possible deadlock caused by fb_set_suspend
Herton Ronaldo Krzesinski [Fri, 17 Jun 2011 19:02:39 +0000]
fb: avoid possible deadlock caused by fb_set_suspend

commit 9e769ff3f585db8f978f9113be83d36c7e3965dd upstream.

A lock ordering issue can cause deadlocks: in framebuffer/console code,
all needed struct fb_info locks are taken before acquire_console_sem(),
in places which need to take console semaphore.

But fb_set_suspend is always called with console semaphore held, and
inside it we call lock_fb_info which gets the fb_info lock, inverse
locking order of what the rest of the code does. This causes a real
deadlock issue, when we write to state fb sysfs attribute (which calls
fb_set_suspend) while a framebuffer is being unregistered by
remove_conflicting_framebuffers, as can be shown by following show
blocked state trace on a test program which loads i915 and runs another
forked processes writing to state attribute:

Test process with semaphore held and trying to get fb_info lock:
..
fb-test2      D 0000000000000000     0   237    228 0x00000000
 ffff8800774f3d68 0000000000000082 00000000000135c0 00000000000135c0
 ffff880000000000 ffff8800774f3fd8 ffff8800774f3fd8 ffff880076ee4530
 00000000000135c0 ffff8800774f3fd8 ffff8800774f2000 00000000000135c0
Call Trace:
 [<ffffffff8141287a>] __mutex_lock_slowpath+0x11a/0x1e0
 [<ffffffff814142f2>] ? _raw_spin_lock_irq+0x22/0x40
 [<ffffffff814123d3>] mutex_lock+0x23/0x50
 [<ffffffff8125dfc5>] lock_fb_info+0x25/0x60
 [<ffffffff8125e3f0>] fb_set_suspend+0x20/0x80
 [<ffffffff81263e2f>] store_fbstate+0x4f/0x70
 [<ffffffff812e7f70>] dev_attr_store+0x20/0x30
 [<ffffffff811c46b4>] sysfs_write_file+0xd4/0x160
 [<ffffffff81155a26>] vfs_write+0xc6/0x190
 [<ffffffff81155d51>] sys_write+0x51/0x90
 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b
..
modprobe process stalled because has the fb_info lock (got inside
unregister_framebuffer) but waiting for the semaphore held by the
test process which is waiting to get the fb_info lock:
..
modprobe      D 0000000000000000     0   230    218 0x00000000
 ffff880077a4d618 0000000000000082 0000000000000001 0000000000000001
 ffff880000000000 ffff880077a4dfd8 ffff880077a4dfd8 ffff8800775a2e20
 00000000000135c0 ffff880077a4dfd8 ffff880077a4c000 00000000000135c0
Call Trace:
 [<ffffffff81411fe5>] schedule_timeout+0x215/0x310
 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50
 [<ffffffff814130dd>] __down+0x6d/0xb0
 [<ffffffff81089f71>] down+0x41/0x50
 [<ffffffff810629ac>] acquire_console_sem+0x2c/0x50
 [<ffffffff812ca53d>] unbind_con_driver+0xad/0x2d0
 [<ffffffff8126f5f7>] fbcon_event_notify+0x457/0x890
 [<ffffffff814144ff>] ? _raw_spin_unlock_irqrestore+0x1f/0x50
 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50
 [<ffffffff8141836d>] notifier_call_chain+0x4d/0x70
 [<ffffffff8108a3b8>] __blocking_notifier_call_chain+0x58/0x80
 [<ffffffff8108a3f6>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff8125dabb>] fb_notifier_call_chain+0x1b/0x20
 [<ffffffff8125e6ac>] unregister_framebuffer+0x7c/0x130
 [<ffffffff8125e8b3>] remove_conflicting_framebuffers+0x153/0x180
 [<ffffffff8125eef3>] register_framebuffer+0x93/0x2c0
 [<ffffffffa0331112>] drm_fb_helper_single_fb_probe+0x252/0x2f0 [drm_kms_helper]
 [<ffffffffa03314a3>] drm_fb_helper_initial_config+0x2f3/0x6d0 [drm_kms_helper]
 [<ffffffffa03318dd>] ? drm_fb_helper_single_add_all_connectors+0x5d/0x1c0 [drm_kms_helper]
 [<ffffffffa037b588>] intel_fbdev_init+0xa8/0x160 [i915]
 [<ffffffffa0343d74>] i915_driver_load+0x854/0x12b0 [i915]
 [<ffffffffa02f0e7e>] drm_get_pci_dev+0x19e/0x360 [drm]
 [<ffffffff8141821d>] ? sub_preempt_count+0x9d/0xd0
 [<ffffffffa0386f91>] i915_pci_probe+0x15/0x17 [i915]
 [<ffffffff8124481f>] local_pci_probe+0x5f/0xd0
 [<ffffffff81244f89>] pci_device_probe+0x119/0x120
 [<ffffffff812eccaa>] ? driver_sysfs_add+0x7a/0xb0
 [<ffffffff812ed003>] driver_probe_device+0xa3/0x290
 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0
 [<ffffffff812ed29b>] __driver_attach+0xab/0xb0
 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0
 [<ffffffff812ebd3e>] bus_for_each_dev+0x5e/0x90
 [<ffffffff812ecc2e>] driver_attach+0x1e/0x20
 [<ffffffff812ec6f2>] bus_add_driver+0xe2/0x320
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffff812ed536>] driver_register+0x76/0x140
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffff81245216>] __pci_register_driver+0x56/0xd0
 [<ffffffffa02f1264>] drm_pci_init+0xe4/0xf0 [drm]
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffffa02e84a8>] drm_init+0x58/0x70 [drm]
 [<ffffffffa03aa094>] i915_init+0x94/0x96 [i915]
 [<ffffffff81002194>] do_one_initcall+0x44/0x190
 [<ffffffff810a066b>] sys_init_module+0xcb/0x210
 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b
..

fb-test2 which reproduces above is available on kernel.org bug #26232.
To solve this issue, avoid calling lock_fb_info inside fb_set_suspend,
and move it out to where needed (callers of fb_set_suspend must call
lock_fb_info before if needed). So far, the only place which needs to
call lock_fb_info is store_fbstate, all other places which calls
fb_set_suspend are suspend/resume hooks that should not need the lock as
they should be run only when processes are already frozen in
suspend/resume.

References: https://bugzilla.kernel.org/show_bug.cgi?id=26232
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agocarminefb: Fix module parameters permissions
Jean Delvare [Fri, 8 Jul 2011 09:04:38 +0000]
carminefb: Fix module parameters permissions

commit c84c14224bbca6ec60d5851fcc87be0e34df2f44 upstream.

The third parameter of module_param is supposed to be an octal value.
The missing leading "0" causes the following:

$ ls -l /sys/module/carminefb/parameters/
total 0
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_displays
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_mode
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_mode_str

After fixing the perm parameter, we get the expected:

$ ls -l /sys/module/carminefb/parameters/
total 0
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_displays
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_mode
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_mode_str

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoiommu/amd: Fix wrong shift direction
Joerg Roedel [Tue, 11 Oct 2011 15:41:32 +0000]
iommu/amd: Fix wrong shift direction

commit fcd0861db1cf4e6ed99f60a815b7b72c2ed36ea4 upstream.

The shift direction was wrong because the function takes a
page number and i is the address is the loop.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoWMI: properly cleanup devices to avoid crashes
Dmitry Torokhov [Wed, 7 Sep 2011 22:00:02 +0000]
WMI: properly cleanup devices to avoid crashes

commit 023b9565972a4a5e0f01b9aa32680af6e9b5c388 upstream.

We need to remove devices that we destroy from the list, otherwise
we'll crash if there are more than one "_WDG" methods in DSDT.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=32052

Tested-by: Ilya Tumaykin <librarian_rus@yahoo.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoccwgroup: move attributes to attribute group
Sebastian Ott [Sun, 30 Oct 2011 14:16:52 +0000]
ccwgroup: move attributes to attribute group

commit dbdf1afcaaabe83dea15a3cb9b9013e73ae3b1ad upstream.

Put sysfs attributes of ccwgroup devices in an attribute group to
ensure that these attributes are actually present when userspace
is notified via uevents.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomemory leak with RCU_TABLE_FREE
Martin Schwidefsky [Sun, 30 Oct 2011 14:16:08 +0000]
memory leak with RCU_TABLE_FREE

commit e73b7fffe487c315fd1a4fa22282e3362b440a06 upstream.

The rcu page table free code uses a couple of bits in the page table
pointer passed to tlb_remove_table to discern the different page table
types. __tlb_remove_table extracts the type with an incorrect mask which
leads to memory leaks. The correct mask is ((FRAG_MASK << 4) | FRAG_MASK).

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agouser per registers vs. ptrace single stepping
Martin Schwidefsky [Sun, 30 Oct 2011 14:16:07 +0000]
user per registers vs. ptrace single stepping

commit a45aff5285871bf7be1781d9462d3fdbb6c913f9 upstream.

git commit 5e9a2692 "[S390] ptrace cleanup" introduced a regression
for the case when both a user PER set (e.g. a storage alteration trace) and
PTRACE_SINGLESTEP are active. The new code will overrule the user PER set
with a instruction-fetch PER set over the whole address space for ptrace
single stepping. The inferior process will be stopped after each instruction
with an instruction fetch event. Any other events that may have occurred
concurrently are not reported (e.g. storage alteration event) because the
control bits for them are not set. The solution is to merge the PER control
bits of the user PER set with the PER_EVENT_IFETCH control bit for
PTRACE_SINGLESTEP.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoKVM: s390: check cpu_id prior to using it
Carsten Otte [Tue, 18 Oct 2011 10:27:12 +0000]
KVM: s390: check cpu_id prior to using it

commit 4d47555a80495657161a7e71ec3014ff2021e450 upstream.

We use the cpu id provided by userspace as array index here. Thus we
clearly need to check it first. Ooops.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: Fix a bug in WM8962 DSP_A and DSP_B settings
Susan Gao [Thu, 29 Sep 2011 10:08:18 +0000]
ASoC: Fix a bug in WM8962 DSP_A and DSP_B settings

commit fbc7c62a3ff831aef24894b7982cd1adb2b7e070 upstream.

Signed-off-by: Susan Gao <sgao@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmico.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: Remove direct register cache accesses from WM8962 driver
Mark Brown [Fri, 23 Sep 2011 20:26:33 +0000]
ASoC: Remove direct register cache accesses from WM8962 driver

commit 38f3f31a0a797bdbcc0cdb12553bbecc2f9a91c4 upstream.

Also fix return values for speaker switch updates.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture
Axel Lin [Thu, 20 Oct 2011 04:13:24 +0000]
ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture

commit 35024f4922f7b271e7529673413889aa3d51c5fc upstream.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: wm8994: Fix setting rate_reg for wm8994-aif2
Axel Lin [Tue, 4 Oct 2011 14:07:18 +0000]
ASoC: wm8994: Fix setting rate_reg for wm8994-aif2

commit c527e6aadc8f142ad388b6aa59a1ce6a4bfb1966 upstream.

For wm8994-aif2, the rate_reg should be WM8994_AIF2_RATE.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2
Axel Lin [Fri, 21 Oct 2011 02:44:07 +0000]
ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2

commit 3205e6629bc0eb747fb7d1b4b8fec00b7b919e58 upstream.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: ak4535: fixup cache register table
Axel Lin [Thu, 13 Oct 2011 09:17:06 +0000]
ASoC: ak4535: fixup cache register table

commit 7c04241acbdaf97f1448dcccd27ea0fcd1a57684 upstream.

ak4535_reg should be 8bit, but cache table is defined as 16bit.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: ak4642: fixup cache register table
Kuninori Morimoto [Thu, 13 Oct 2011 09:03:54 +0000]
ASoC: ak4642: fixup cache register table

commit 19b115e523208a926813751aac8934cf3fc6085e upstream.

ak4642 register was 8bit, but cache table was defined as 16bit.
ak4642 doesn't work correctry without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: wm8741: Fix setting interface format for DSP modes
Axel Lin [Mon, 17 Oct 2011 12:14:56 +0000]
ASoC: wm8741: Fix setting interface format for DSP modes

commit 3a340104fad6ecbea5ad6792a2ea855f0507a6e0 upstream.

According to the datasheet:
Format Control (05h)
BITS[3:2]
        FMT[1:0] Audio data format selection
                00 = right justified mode
                01 = left justified mode
                10 = I2S mode
                11 = DSP mode
BIT[4]  LRP Polarity selec for LRCLK/DSP mode select
                0 = normal LRCLK poalrity/DSP mode A
                1 = inverted LRCLK poarity/DSP mode B

For SND_SOC_DAIFMT_DSP_A, we should set 0x000C instead of 0x0003.
For SND_SOC_DAIFMT_DSP_B, we should set 0x001C instead of 0x0013.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: wm8940: Properly set codec->dapm.bias_level
Axel Lin [Wed, 26 Oct 2011 01:53:41 +0000]
ASoC: wm8940: Properly set codec->dapm.bias_level

commit 5927f94700e860ae27ff24e7f3bc9e4f7b9922eb upstream.

Reported-by: Chris Paulson-Ellis <chris@edesix.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoio-mapping: ensure io_mapping_map_atomic _is_ atomic
Daniel Vetter [Wed, 28 Sep 2011 09:57:23 +0000]
io-mapping: ensure io_mapping_map_atomic _is_ atomic

commit 24dd85ff723f142093f44244764b9b5c152235b8 upstream.

For the !HAVE_ATOMIC_IOMAP case the stub functions did not call
pagefault_disable/_enable. The i915 driver relies on the map
actually being atomic, otherwise it can deadlock with it's own
pagefault handler in the gtt pwrite fastpath.

This is exercised by gem_mmap_gtt from the intel-gpu-toosl gem
testsuite.

v2: Chris Wilson noted the lack of an include.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38115
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agovfs: add "device" tag to /proc/self/mountstats
Bryan Schumaker [Fri, 7 Oct 2011 17:41:15 +0000]
vfs: add "device" tag to /proc/self/mountstats

commit a877ee03ac010ded434b77f7831f43cbb1fcc60f upstream.

nfsiostat was failing to find mounted filesystems on kernels after
2.6.38 because of changes to show_vfsstat() by commit
c7f404b40a3665d9f4e9a927cc5c1ee0479ed8f9.  This patch adds back the
"device" tag before the nfs server entry so scripts can parse the
mountstats file correctly.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonfsd4: ignore WANT bits in open downgrade
J. Bruce Fields [Mon, 10 Oct 2011 21:34:31 +0000]
nfsd4: ignore WANT bits in open downgrade

commit c30e92df30d7d5fe65262fbce5d1b7de675fe34e upstream.

We don't use WANT bits yet--and sending them can probably trigger a
BUG() further down.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonfsd4: fix open downgrade, again
J. Bruce Fields [Mon, 19 Sep 2011 19:07:41 +0000]
nfsd4: fix open downgrade, again

commit 3d02fa29dec920c597dd7b7db608a4bc71f088ce upstream.

Yet another open-management regression:

- nfs4_file_downgrade() doesn't remove the BOTH access bit on
  downgrade, so the server's idea of the stateid's access gets
  out of sync with the client's.  If we want to keep an O_RDWR
  open in this case, we should do that in the file_put_access
  logic rather than here.
- We forgot to convert v4 access to an open mode here.

This logic has proven too hard to get right.  In the future we may
consider:
- reexamining the lock/openowner relationship (locks probably
  don't really need to take their own references here).
- adding open upgrade/downgrade support to the vfs.
- removing the atomic operations.  They're redundant as long as
  this is all under some other lock.

Also, maybe some kind of additional static checking would help catch
O_/NFS4_SHARE_ACCESS confusion.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonfsd4: permit read opens of executable-only files
J. Bruce Fields [Thu, 25 Aug 2011 14:48:39 +0000]
nfsd4: permit read opens of executable-only files

commit a043226bc140a2c1dde162246d68a67e5043e6b2 upstream.

A client that wants to execute a file must be able to read it.  Read
opens over nfs are therefore implicitly allowed for executable files
even when those files are not readable.

NFSv2/v3 get this right by using a passed-in NFSD_MAY_OWNER_OVERRIDE on
read requests, but NFSv4 has gotten this wrong ever since
dc730e173785e29b297aa605786c94adaffe2544 "nfsd4: fix owner-override on
open", when we realized that the file owner shouldn't override
permissions on non-reclaim NFSv4 opens.

So we can't use NFSD_MAY_OWNER_OVERRIDE to tell nfsd_permission to allow
reads of executable files.

So, do the same thing we do whenever we encounter another weird NFS
permission nit: define yet another NFSD_MAY_* flag.

The industry's future standardization on 128-bit processors will be
motivated primarily by the need for integers with enough bits for all
the NFSD_MAY_* flags.

Reported-by: Leonardo Borda <leonardoborda@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonfsd4: fix seqid_mutating_error
J. Bruce Fields [Wed, 10 Aug 2011 23:16:22 +0000]
nfsd4: fix seqid_mutating_error

commit 576163005de286bbd418fcb99cfd0971523a0c6d upstream.

The set of errors here does *not* agree with the set of errors specified
in the rfc!

While we're there, turn this macros into a function, for the usual
reasons, and move it to the one place where it's actually used.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonfsd4: stop using nfserr_resource for transitory errors
J. Bruce Fields [Wed, 10 Aug 2011 23:07:33 +0000]
nfsd4: stop using nfserr_resource for transitory errors

commit 3e77246393c0a433247631a1f0e9ec98d3d78a1c upstream.

The server is returning nfserr_resource for both permanent errors and
for errors (like allocation failures) that might be resolved by retrying
later.  Save nfserr_resource for the former and use delay/jukebox for
the latter.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonfsd4: Remove check for a 32-bit cookie in nfsd4_readdir()
Bernd Schubert [Mon, 8 Aug 2011 15:38:08 +0000]
nfsd4: Remove check for a 32-bit cookie in nfsd4_readdir()

commit 832023bffb4b493f230be901f681020caf3ed1f8 upstream.

Fan Yong <yong.fan@whamcloud.com> noticed setting
FMODE_32bithash wouldn't work with nfsd v4, as
nfsd4_readdir() checks for 32 bit cookies. However, according to RFC 3530
cookies have a 64 bit type and cookies are also defined as u64 in
'struct nfsd4_readdir'. So remove the test for >32-bit values.

Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonfs: don't try to migrate pages with active requests
Jeff Layton [Wed, 12 Oct 2011 14:57:42 +0000]
nfs: don't try to migrate pages with active requests

commit 2da956523526e440ef4f4dd174e26f5ac06fe011 upstream.

nfs_find_and_lock_request will take a reference to the nfs_page and
will then put it if the req is already locked. It's possible though
that the reference will be the last one. That put then can kick off
a whole series of reference puts:

nfs_page
   nfs_open_context
      dentry
          inode

If the inode ends up being deleted, then the VFS will call
truncate_inode_pages. That function will try to take the page lock, but
it was already locked when migrate_page was called. The code
deadlocks.

Fix this by simply refusing the migration request if PagePrivate is
already set, indicating that the page is already associated with an
active read or write request.

We've had a customer test a backported version of this patch and
the preliminary results seem good.

Cc: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agogenirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier
Ian Campbell [Mon, 3 Oct 2011 14:37:00 +0000]
genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier

commit 9bab0b7fbaceec47d32db51cd9e59c82fb071f5a upstream.

This adds a mechanism to resume selected IRQs during syscore_resume
instead of dpm_resume_noirq.

Under Xen we need to resume IRQs associated with IPIs early enough
that the resched IPI is unmasked and we can therefore schedule
ourselves out of the stop_machine where the suspend/resume takes
place.

This issue was introduced by 676dc3cf5bc3 "xen: Use IRQF_FORCE_RESUME".

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1318713254.11016.52.camel@dagon.hellion.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotracing: Fix returning of duplicate data after EOF in trace_pipe_raw
Steven Rostedt [Fri, 14 Oct 2011 14:44:25 +0000]
tracing: Fix returning of duplicate data after EOF in trace_pipe_raw

commit 436fc280261dcfce5af38f08b89287750dc91cd2 upstream.

The trace_pipe_raw handler holds a cached page from the time the file
is opened to the time it is closed. The cached page is used to handle
the case of the user space buffer being smaller than what was read from
the ring buffer. The left over buffer is held in the cache so that the
next read will continue where the data left off.

After EOF is returned (no more data in the buffer), the index of
the cached page is set to zero. If a user app reads the page again
after EOF, the check in the buffer will see that the cached page
is less than page size and will return the cached page again. This
will cause reading the trace_pipe_raw again after EOF to return
duplicate data, making the output look like the time went backwards
but instead data is just repeated.

The fix is to not reset the index right after all data is read
from the cache, but to reset it after all data is read and more
data exists in the ring buffer.

Reported-by: Jeremy Eder <jeder@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoftrace/kprobes: Fix not to delete probes if in use
Masami Hiramatsu [Tue, 4 Oct 2011 10:44:38 +0000]
ftrace/kprobes: Fix not to delete probes if in use

commit 02ca1521ad404cf566e0075848f80d064c0a0503 upstream.

Fix kprobe-tracer not to delete a probe if the probe is in use.
In that case, delete operation will return -EBUSY.

This bug can cause a kernel panic if enabled probes are deleted
during perf record.

(Add some probes on functions)
sh-4.2# perf probe --del probe:\*
sh-4.2# exit
(kernel panic)

This is originally reported on the fedora bugzilla:

 https://bugzilla.redhat.com/show_bug.cgi?id=742383

I've also checked that this problem doesn't happen on
tracepoints when module removing because perf event
locks target module.

$ sudo ./perf record -e xfs:\* -aR sh
sh-4.2# rmmod xfs
ERROR: Module xfs is in use
sh-4.2# exit
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.203 MB perf.data (~8862 samples) ]

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Link: http://lkml.kernel.org/r/20111004104438.14591.6553.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoperf probe: Fix to show correct error string
Masami Hiramatsu [Tue, 4 Oct 2011 10:45:04 +0000]
perf probe: Fix to show correct error string

commit 44a56040a0037a845d5fa218dffde464579f0cab upstream.

Fix perf probe to show correct error string when it
fails to delete an event. The write(2) returns -1
if failed, and errno stores real error number.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/20111004104504.14591.41266.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomd/raid5: fix bug that could result in reads from a failed device.
NeilBrown [Tue, 25 Oct 2011 23:31:04 +0000]
md/raid5: fix bug that could result in reads from a failed device.

commit 355840e7a7e56bb2834fd3b0da64da5465f8aeaa upstream.

This bug was introduced in 415e72d034c50520ddb7ff79e7d1792c1306f0c9
which was in 2.6.36.

There is a small window of time between when a device fails and when
it is removed from the array.  During this time we might still read
from it, but we won't write to it - so it is possible that we could
read stale data.

We didn't need the test of 'Faulty' before because the test on
In_sync is sufficient.  Since we started allowing reads from the early
part of non-In_sync devices we need a test on Faulty too.

This is suitable for any kernel from 2.6.36 onwards, though the patch
might need a bit of tweaking in 3.0 and earlier.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoapic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches
Jan Beulich [Wed, 28 Sep 2011 15:44:54 +0000]
apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches

commit 838312be46f3abfbdc175f81c3e54a857994476d upstream.

These warnings (generally one per CPU) are a result of
initializing x86_cpu_to_logical_apicid while apic_default is
still in use, but the check in setup_local_APIC() being done
when apic_bigsmp was already used as an override in
default_setup_apic_routing():

 Overriding APIC driver with bigsmp
 Enabling APIC mode:  Physflat.  Using 5 I/O APICs
 ------------[ cut here ]------------
 WARNING: at .../arch/x86/kernel/apic/apic.c:1239
 ...
 CPU 1 irqstacks, hard=f1c9a000 soft=f1c9c000
 Booting Node   0, Processors  #1
 smpboot cpu 1: start_ip = 9e000
 Initializing CPU#1
 ------------[ cut here ]------------
 WARNING: at .../arch/x86/kernel/apic/apic.c:1239
 setup_local_APIC+0x137/0x46b() Hardware name: ...
 CPU1 logical APIC ID: 2 != 8
 ...

Fix this (for the time being, i.e. until
x86_32_early_logical_apicid() will get removed again, as Tejun
says ought to be possible) by overriding the previously stored
values at the point where the APIC driver gets overridden.

v2: Move this and the pre-existing override logic into
    arch/x86/kernel/apic/bigsmp_32.c.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/4E835D16020000780005844C@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotime: Change jiffies_to_clock_t() argument type to unsigned long
hank [Tue, 20 Sep 2011 20:53:39 +0000]
time: Change jiffies_to_clock_t() argument type to unsigned long

commit cbbc719fccdb8cbd87350a05c0d33167c9b79365 upstream.

The parameter's origin type is long. On an i386 architecture, it can
easily be larger than 0x80000000, causing this function to convert it
to a sign-extended u64 type.

Change the type to unsigned long so we get the correct result.

Signed-off-by: hank <pyu@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
[ build fix ]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoiwlagn: fix priv->cfg->ht_params NULL pointer dereference
Stanislaw Gruszka [Wed, 12 Oct 2011 08:16:35 +0000]
iwlagn: fix priv->cfg->ht_params NULL pointer dereference

commit 107ef97a170dec95893f34614edd92eb8cb9b5d0 upstream.

This fix regression introduced by commit:

commit 15b3f3b006b42a678523cad989bfd60b76bf4403
Author: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date:   Fri Jun 3 07:54:13 2011 -0700

    iwlagn: set smps mode after assoc for 1000 device

Also remove unneeded brackets on the way.

Address:
https://bugzilla.redhat.com/show_bug.cgi?id=744155

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>