8 years ago[SCSI] mptfusion: Fix memory leak in mptctl_getiocinfo()
Jesper Juhl [Sun, 26 Dec 2010 21:14:01 +0000]
[SCSI] mptfusion: Fix memory leak in mptctl_getiocinfo()

A 'kfree(karg)' is missing in a failure path in
mptctl.c::mptctl_getiocinfo() which can cause a memory leak.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] bnx2i: Added reconnect fix connecting against Lefthand targets
Eddie Wai [Sun, 9 Jan 2011 02:00:24 +0000]
[SCSI] bnx2i: Added reconnect fix connecting against Lefthand targets

The nopout's reserved field was not being initialized to zero
before being reused.  Stale CDB values from previous SCSI cmds
of the same BHS offset was the cause of the disconnection
initiated by the Lefthand target.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] cxgbi: get rid of gl_skb in cxgbi_ddp_info
kxie@chelsio.com [Fri, 7 Jan 2011 22:45:39 +0000]
[SCSI] cxgbi: get rid of gl_skb in cxgbi_ddp_info

Remove gl_skb from cxgbi_ddp_info as it is only used by cxgb3i.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] cxgbi: set ulpmode only if digest is on
kxie@chelsio.com [Fri, 7 Jan 2011 22:45:39 +0000]
[SCSI] cxgbi: set ulpmode only if digest is on

There is no need to set ulpmode on the tx skbs if no digest is enabled.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: avoid leaking stack contents to userland
Vasiliy Kulikov [Fri, 7 Jan 2011 16:55:53 +0000]
[SCSI] hpsa: avoid leaking stack contents to userland

memset arg64 to zero in the passthrough ioctls to avoid leaking contents
of kernel stack memory to userland via uninitialized padding fields
inserted by the compiler for alignment reasons.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: Fix problem that CMD_UNABORTABLE command status was treated as unknown
Stephen M. Cameron [Fri, 7 Jan 2011 16:55:48 +0000]
[SCSI] hpsa: Fix problem that CMD_UNABORTABLE command status was treated as unknown

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: fix use of uninitialized variable in hpsa_add_msa2xxx_enclosure_device()
Stephen M. Cameron [Fri, 7 Jan 2011 16:55:43 +0000]
[SCSI] hpsa: fix use of uninitialized variable in hpsa_add_msa2xxx_enclosure_device()

Thanks to Scott Teel for noticing this.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: Add a per controller commands_outstanding entry in /sys
Stephen M. Cameron [Thu, 6 Jan 2011 20:48:39 +0000]
[SCSI] hpsa: Add a per controller commands_outstanding entry in /sys

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: use usleep_range not msleep for small sleeps
Stephen M. Cameron [Thu, 6 Jan 2011 20:48:34 +0000]
[SCSI] hpsa: use usleep_range not msleep for small sleeps

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: allow driver to put controller in either simple or performant mode
Stephen M. Cameron [Thu, 6 Jan 2011 20:48:29 +0000]
[SCSI] hpsa: allow driver to put controller in either simple or performant mode

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: take the adapter lock in hpsa_wait_for_mode_change_ack
Stephen M. Cameron [Thu, 6 Jan 2011 20:48:24 +0000]
[SCSI] hpsa: take the adapter lock in hpsa_wait_for_mode_change_ack

Need to take the lock while accessing the register to check to
see if config table changes have taken effect.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: do not reset unknown boards on reset_devices
Stephen M. Cameron [Thu, 6 Jan 2011 20:48:18 +0000]
[SCSI] hpsa: do not reset unknown boards on reset_devices

This is to prevent hpsa from resetting older boards
which the cciss driver may be controlling.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: limit commands allocated on reset_devices
Stephen M. Cameron [Thu, 6 Jan 2011 20:48:13 +0000]
[SCSI] hpsa: limit commands allocated on reset_devices

This is to conserve memory in a memory-limited kdump scenario

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: Use kernel provided PCI state save and restore functions
Stephen M. Cameron [Thu, 6 Jan 2011 20:48:08 +0000]
[SCSI] hpsa: Use kernel provided PCI state save and restore functions

and use the doorbell reset method if available (which doesn't
lock up the controller if you properly save and restore all
the PCI registers that you're supposed to.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: fix board status waiting code
Stephen M. Cameron [Thu, 6 Jan 2011 20:48:03 +0000]
[SCSI] hpsa: fix board status waiting code

After a reset, we should first wait for the board to become "not ready",
and then wait for it to become "ready", instead of immediately
waiting for it to become "ready", and do this waiting *after*
restoring PCI config space registers.  Also, only wait 10 secs
for board to become "not ready" after a reset (it should quickly
become not ready.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: Remove duplicate defines of DIRECT_LOOKUP_ constants
Stephen M. Cameron [Thu, 6 Jan 2011 20:47:58 +0000]
[SCSI] hpsa: Remove duplicate defines of DIRECT_LOOKUP_ constants

They are defined in hpsa_cmd.h

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: fixup DMA address before freeing.
Stephen M. Cameron [Thu, 6 Jan 2011 20:47:53 +0000]
[SCSI] hpsa: fixup DMA address before freeing.

Some low bits might have been set by the driver, causing
a message like this to come out:

 [   13.288062] ------------[ cut here ]------------
 [   13.293211] WARNING: at lib/dma-debug.c:803 check_unmap+0x1a1/0x654()
 [   13.300387] Hardware name: ProLiant DL180 G6
 [   13.305335] hpsa 0000:06:00.0: DMA-API: device driver tries to free
 DMA memory it has not allocated [device address=0x000000007f81e001]
 [size=640 bytes]

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] hpsa: defend against zero sized buffers in passthru ioctls
Stephen M. Cameron [Thu, 6 Jan 2011 20:47:48 +0000]
[SCSI] hpsa: defend against zero sized buffers in passthru ioctls

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] scsi_dh_alua: add scalable ONTAP lun to dev list
Mike Snitzer [Wed, 5 Jan 2011 21:00:24 +0000]
[SCSI] scsi_dh_alua: add scalable ONTAP lun to dev list

Currently NetApp's VID/PID details in the INQUIRY response shows up as
'NETAPP' and 'LUN'.  With upcoming scalable SAN ONTAP version on NetApp
controllers, the PID entry alone is being modified to 'LUN C-Mode' (to
distinguish current ONTAP LUNs from scalable ONTAP LUNs).

'LUN' would still suffice for matching 'LUN C-Mode' but best to
explicitly add these new NetApp LUNs to the device list.

Reported-by: Martin George <marting@netapp.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] scsi_dh_alua: Add Promise VTrak to dev list
Ilgu Hong [Wed, 5 Jan 2011 21:00:23 +0000]
[SCSI] scsi_dh_alua: Add Promise VTrak to dev list

Adds Promise VTrak devices to the ALUA device handler.

Signed-off-by: Ilgu Hong <ilgu.hong@promise.com>
Signed-off-by: Joseph Gruher <joseph.r.gruher@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] scsi_dh_alua: fix stpg_endio group state reporting
Joseph Gruher [Wed, 5 Jan 2011 21:00:22 +0000]
[SCSI] scsi_dh_alua: fix stpg_endio group state reporting

Initialize stpg_endio() 'err' to SCSI_DH_OK and only change it to
SCSI_DH_IO accordingly.  This allows the switching of target group state
to be properly reported when no error has occurred.

Signed-off-by: Joseph Gruher <joseph.r.gruher@intel.com>
Signed-off-by: Ilgu Hong <ilgu.hong@promise.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] scsi_dh_alua: fix deadlock in stpg_endio
Joseph Gruher [Wed, 5 Jan 2011 21:00:21 +0000]
[SCSI] scsi_dh_alua: fix deadlock in stpg_endio

The use of blk_execute_rq_nowait() implies __blk_put_request() is needed
in stpg_endio() rather than blk_put_request() -- blk_finish_request() is
called with queue lock already held.

Signed-off-by: Joseph Gruher <joseph.r.gruher@intel.com>
Signed-off-by: Ilgu Hong <ilgu.hong@promise.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] scsi_dh_alua: fix submit_stpg return
Joseph Gruher [Wed, 5 Jan 2011 21:00:20 +0000]
[SCSI] scsi_dh_alua: fix submit_stpg return

submit_stpg() will always return failure so alua_activate() will report
failure via dm-multipath callback function.  Even though the stpg fired
successfuly dm-multipath does not know and always fails to change the
valid path.

By returning SCSI_DH_OK we're now skipping alua_activate()'s call to
activate_complete 'fn'.  But this is fine because stpg_endio() will call
it via h->callback_fn().

Signed-off-by: Joseph Gruher <joseph.r.gruher@intel.com>
Signed-off-by: Ilgu Hong <ilgu.hong@promise.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] mpt2sas: Bump version 08.100.00.00
Kashyap, Desai [Tue, 4 Jan 2011 06:10:59 +0000]
[SCSI] mpt2sas: Bump version 08.100.00.00

Upgrade driver version from 7.100.00.00 to 8.100.00.00

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] mpt2sas: Basic Code Cleanup in mpt2sas_base
Kashyap, Desai [Tue, 4 Jan 2011 06:09:20 +0000]
[SCSI] mpt2sas: Basic Code Cleanup in mpt2sas_base

Basic Code Cleanup:
(1) _base_get_cb_idx and mpt2sas_base_free_smid were reorganized in
similar fashion so the order of obtaining the cbx and smid are
scsiio,
hi_priority, and internal.
(2) The hi_priority and internal request queue struct was made
smaller
by removing the scmd and chain_tracker, thus saving memory
allocation.
(3) For scsiio request, a new structure was created having the same
elements from the former request tracker struct.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] mpt2sas: Add support for Customer specific branding messages
Kashyap, Desai [Tue, 4 Jan 2011 06:06:37 +0000]
[SCSI] mpt2sas: Add support for Customer specific branding messages

Add support for Customer specific branding messages when device driver loads,
based on specific customer subsystem vendor and device Ids

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] mpt2sas: Revision P MPI Header Update
Kashyap, Desai [Tue, 4 Jan 2011 06:05:41 +0000]
[SCSI] mpt2sas: Revision P MPI Header Update

Revision P MPI Header Update:
a) Added enable/disable SATA NCQ operations to SAS IO Unit Control
Request.
b) Modified Host Based Discovery Action Request message format.
c) Removed Device Path bit from IO Unit Page 1 Flags field.
d) Added description of ChainOffset field for Diagnostic Data Upload
Tool.Chaining is not allowed.

Removed mpi2_history.txt file

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years agoMerge branch 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux...
Linus Torvalds [Mon, 24 Jan 2011 09:58:39 +0000]
Merge branch 'BUG_ON' of git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  Remove MAYBE_BUILD_BUG_ON
  BUILD_BUG_ON: make it handle more cases

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Mon, 24 Jan 2011 09:57:43 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: fix missing semicolons in MODULE macro usage
  param: add null statement to compiled-in module params
  module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n
  module: show version information for built-in modules in sysfs

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Mon, 24 Jan 2011 09:56:47 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: return -ENOMEM when memory allocation fails
  tpm: fix panic caused by "tpm: Autodetect itpm devices"
  TPM: Long default timeout fix
  trusted keys: Fix a memory leak in trusted_update().
  keys: add trusted and encrypted maintainers
  encrypted-keys: rename encrypted_defined files to encrypted
  trusted-keys: rename trusted_defined files to trusted

8 years agoRemove MAYBE_BUILD_BUG_ON
Rusty Russell [Mon, 24 Jan 2011 20:45:10 +0000]
Remove MAYBE_BUILD_BUG_ON

Now BUILD_BUG_ON() can handle optimizable constants, we don't need
MAYBE_BUILD_BUG_ON any more.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

8 years agoBUILD_BUG_ON: make it handle more cases
Rusty Russell [Mon, 24 Jan 2011 20:45:10 +0000]
BUILD_BUG_ON: make it handle more cases

BUILD_BUG_ON used to use the optimizer to do code elimination or fail
at link time; it was changed to first the size of a negative array (a
nicer compile time error), then (in
8c87df457cb58fe75b9b893007917cf8095660a0) to a bitfield.

This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON();
as Jan points out in that commit, it didn't work as intended anyway.

bitfields: needs a literal constant at parse time, and can't be put under
"if (__builtin_constant_p(x))" for example.
negative array: can handle anything, but if the compiler can't tell it's
a constant, silently has no effect.
link time: breaks link if the compiler can't determine the value, but the
linker output is not usually as informative as a compiler error.

If we use the negative-array-size method *and* the link time trick,
we get the ability to use BUILD_BUG_ON() under __builtin_constant_p()
branches, and maximal ability for the compiler to detect errors at
build time.

We also document it thoroughly.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jan Beulich <JBeulich@novell.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>

8 years agomodule: fix missing semicolons in MODULE macro usage
Rusty Russell [Mon, 24 Jan 2011 20:32:52 +0000]
module: fix missing semicolons in MODULE macro usage

You always needed them when you were a module, but the builtin versions
of the macros used to be more lenient.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

8 years agoparam: add null statement to compiled-in module params
Linus Walleij [Wed, 5 Jan 2011 12:27:04 +0000]
param: add null statement to compiled-in module params

Add an unused struct declaration statement requiring a
terminating semicolon to the compile-in case to provoke an
error if __MODULE_INFO() is used without the terminating
semicolon. Previously MODULE_ALIAS("foo") (no semicolon)
compiled fine if MODULE was not selected.

Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

8 years agomodule: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n
Rusty Russell [Mon, 24 Jan 2011 20:32:51 +0000]
module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n

lib/built-in.o:(__modver+0x8): undefined reference to `__modver_version_show'
lib/built-in.o:(__modver+0x2c): undefined reference to `__modver_version_show'

Simplest to just not emit anything: if they've disabled SYSFS they probably
want the smallest kernel possible.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

8 years agomodule: show version information for built-in modules in sysfs
Dmitry Torokhov [Wed, 15 Dec 2010 22:00:19 +0000]
module: show version information for built-in modules in sysfs

Currently only drivers that are built as modules have their versions
shown in /sys/module/<module_name>/version, but this information might
also be useful for built-in drivers as well. This especially important
for drivers that do not define any parameters - such drivers, if
built-in, are completely invisible from userspace.

This patch changes MODULE_VERSION() macro so that in case when we are
compiling built-in module, version information is stored in a separate
section. Kernel then uses this data to create 'version' sysfs attribute
in the same fashion it creates attributes for module parameters.

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

8 years agoselinux: return -ENOMEM when memory allocation fails
Davidlohr Bueso [Fri, 21 Jan 2011 15:28:04 +0000]
selinux: return -ENOMEM when memory allocation fails

Return -ENOMEM when memory allocation fails in cond_init_bool_indexes,
correctly propagating error code to caller.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agotpm: fix panic caused by "tpm: Autodetect itpm devices"
Olof Johansson [Fri, 7 Jan 2011 03:24:01 +0000]
tpm: fix panic caused by "tpm: Autodetect itpm devices"

commit 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 adds a check for
PNP device id to the common tpm_tis_init() function, which in some
cases (force=1) will be called without the device being a member of
a pnp_dev. Oopsing and panics ensue.

Move the test up to before the call to tpm_tis_init(), since it
just modifies a global variable anyway.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agoTPM: Long default timeout fix
Rajiv Andrade [Fri, 12 Nov 2010 21:30:02 +0000]
TPM: Long default timeout fix

If duration variable value is 0 at this point, it's because
chip->vendor.duration wasn't filled by tpm_get_timeouts() yet.
This patch sets then the lowest timeout just to give enough
time for tpm_get_timeouts() to further succeed.

This fix avoids long boot times in case another entity attempts
to send commands to the TPM when the TPM isn't accessible.

Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agotrusted keys: Fix a memory leak in trusted_update().
Jesper Juhl [Sun, 23 Jan 2011 21:40:42 +0000]
trusted keys: Fix a memory leak in trusted_update().

One failure path in security/keys/trusted.c::trusted_update() does
not free 'new_p' while the others do. This patch makes sure we also free
it in the remaining path (if datablob_parse() returns different from
Opt_update).

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agokeys: add trusted and encrypted maintainers
Mimi Zohar [Tue, 18 Jan 2011 14:07:13 +0000]
keys: add trusted and encrypted maintainers

Add myself and David Safford as maintainers for trusted/encrypted keys.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agoencrypted-keys: rename encrypted_defined files to encrypted
Mimi Zohar [Tue, 18 Jan 2011 14:07:12 +0000]
encrypted-keys: rename encrypted_defined files to encrypted

Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and
encrypted.h, respectively. Based on request from David Howells.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agotrusted-keys: rename trusted_defined files to trusted
Mimi Zohar [Tue, 18 Jan 2011 14:07:11 +0000]
trusted-keys: rename trusted_defined files to trusted

Rename trusted_defined.c and trusted_defined.h files to trusted.c and
trusted.h, respectively. Based on request from David Howells.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agofs: fix new dcache.c kernel-doc warnings
Randy Dunlap [Sun, 23 Jan 2011 04:16:06 +0000]
fs: fix new dcache.c kernel-doc warnings

Fix new fs/dcache.c kernel-doc warnings:

  Warning(fs/dcache.c:184): No description found for parameter 'dentry'
  Warning(fs/dcache.c:296): No description found for parameter 'parent'
  Warning(fs/dcache.c:1985): No description found for parameter 'dparent'
  Warning(fs/dcache.c:1985): Excess function parameter 'parent' description in 'd_validate'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agorapidio: fix new kernel-doc warnings
Randy Dunlap [Sun, 23 Jan 2011 04:16:12 +0000]
rapidio: fix new kernel-doc warnings

Fix new rapidio kernel-doc warnings:

  Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev'
  Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodocbook: fix broken serial to tty/serial movement
Randy Dunlap [Sun, 23 Jan 2011 03:50:03 +0000]
docbook: fix broken serial to tty/serial movement

Fix move of drivers/serial/ to drivers/tty/, where it broke
one of the docbook files:

  docproc: drivers/serial/serial_core.c: No such file or directory

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoLinux 2.6.38-rc2
Linus Torvalds [Sat, 22 Jan 2011 03:01:34 +0000]
Linux 2.6.38-rc2

8 years agoMerge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Sat, 22 Jan 2011 00:50:31 +0000]
Merge branch 'media_fixes' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
  [media] staging/lirc: fix mem leaks and ptr err usage
  [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
  [media] hdpvr: enable IR part
  [media] rc/mceusb: timeout should be in ns, not us
  [media] v4l2-device: fix 'use-after-freed' oops
  [media] v4l2-dev: don't memset video_device.dev
  [media] zoran: use video_device_alloc instead of kmalloc
  [media] w9966: zero device state after a detach
  [media] v4l: Fix a use-before-set in the control framework
  [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
  [media] DocBook/v4l: update V4L2 revision and update copyright years
  [media] DocBook/v4l: fix validation error in dev-rds.xml
  [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
  [media] v4l2-ctrls: fix missing 'read-only' check
  [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
  [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
  [media] lirc_zilog: Update TODO.lirc_zilog
  [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
  [media] lirc_zilog: Remove useless struct i2c_driver.command function
  [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
  ...

8 years agoKEYS: Fix up comments in key management code
David Howells [Thu, 20 Jan 2011 16:38:33 +0000]
KEYS: Fix up comments in key management code

Fix up comments in the key management code.  No functional changes.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoKEYS: Do some style cleanup in the key management code.
David Howells [Thu, 20 Jan 2011 16:38:27 +0000]
KEYS: Do some style cleanup in the key management code.

Do a bit of a style clean up in the key management code.  No functional
changes.

Done using:

  perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c
  perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c
  sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c

To remove /*****/ lines, remove comments on the closing brace of a
function to name the function and remove blank lines before the closing
brace of a function.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Fri, 21 Jan 2011 21:44:07 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix up CIFSSMBEcho for unaligned access
  cifs: fix unaligned accesses in cifsConvertToUCS
  cifs: clean up unaligned accesses in cifs_unicode.c
  cifs: fix unaligned access in check2ndT2 and coalesce_t2
  cifs: clean up unaligned accesses in validate_t2
  cifs: use get/put_unaligned functions to access ByteCount
  cifs: move time field in cifsInodeInfo
  cifs: TCP_Server_Info diet
  CIFS: Implement cifs_strict_readv (try #4)
  CIFS: Implement cifs_file_strict_mmap (try #2)
  CIFS: Implement cifs_strict_fsync
  CIFS: Make cifsFileInfo_put work with strict cache mode

8 years agoMerge branch 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Linus Torvalds [Fri, 21 Jan 2011 21:43:21 +0000]
Merge branch 'fixes-2.6.38' of git://git./linux/kernel/git/tj/percpu

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  x86,percpu: Move out of place 64 bit ops into X86_64 section

8 years agoMerge branch 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Linus Torvalds [Fri, 21 Jan 2011 21:38:57 +0000]
Merge branch 'fixes-2.6.38' of git://git./linux/kernel/git/tj/wq

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: note the nested NOT_RUNNING test in worker_clr_flags() isn't a noop
  workqueue: relax lockdep annotation on flush_work()

8 years agoMerge branch 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 21 Jan 2011 21:38:26 +0000]
Merge branch 'irq-cleanup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
  um: Use generic irq Kconfig
  tile: Use generic irq Kconfig
  sparc: Use generic irq Kconfig
  score: Use generic irq Kconfig
  powerpc: Use generic irq Kconfig
  parisc: Use generic irq Kconfig
  mn10300: Use generic irq Kconfig
  microblaze: Use generic irq Kconfig
  m68knommu: Use generic irq Kconfig
  ia64: Use generic irq Kconfig
  frv: Use generic irq Kconfig
  blackfin: Use generic irq Kconfig
  alpha: Use generic irq Kconfig
  genirq: Remove __do_IRQ
  m32r: Convert to generic irq Kconfig
  m32r: Convert usrv platform irq handling
  m32r: Convert opsput_lcdpld irq chip
  m32r: Convert opsput lanpld irq chip
  m32r: Convert opsput pld irq chip
  m32r: Convert opsput irq chip
  ...

8 years agoMerge branch 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 21 Jan 2011 21:35:10 +0000]
Merge branch 'stable/bug-fixes-rc1' of git://git./linux/kernel/git/konrad/xen

* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: p2m: correctly initialize partial p2m leaf
  xen: fix non-ANSI function warning in irq.c

8 years agoMerge branches 'fixes' and 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 21 Jan 2011 21:34:39 +0000]
Merge branches 'fixes' and 'fwnet' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: fix unstable I/O with Canon camcorder

* 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: net: is not experimental anymore
  firewire: net: invalidate ARP entries of removed nodes

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 21 Jan 2011 21:24:33 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662
  ALSA: HDA: Add SKU ignore for another Thinkpad Edge 14
  ALSA: hda - Fix "unused variable" compile warning
  ALSA: hda - Add quirk for HP Z-series workstation
  Revert "ALSA: HDA: Create mixers on ALC887"
  ASoC: PXA: Fix codec address on Zipit Z2
  ASoC: PXA: Fix jack detection on Zipit Z2
  ASoC: Blackfin: fix DAI/SPORT config dependency issues
  ASoC: Blackfin TDM: use external frame syncs
  ASoC: Blackfin AC97: fix build error after multi-component update
  ASoC: Blackfin TDM: fix missed snd_soc_dai_get_drvdata update
  ASoC: documentation updates
  ALSA: ice1712 delta - initialize SPI clock

8 years agoMerge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Fri, 21 Jan 2011 21:24:16 +0000]
Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/83xx: fix build failures on dt compatible list.

8 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Fri, 21 Jan 2011 21:23:52 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
  powerpc/mpic: Fix mask/unmask timeout message
  powerpc/pseries: Add BNX2=m to defconfig
  powerpc: Enable 64kB pages and 1024 threads in pseries config
  powerpc: Disable mcount tracers in pseries defconfig
  powerpc/boot/dts: Install dts from the right directory
  powerpc: machine_check_generic is wrong on 64bit
  powerpc: Check RTAS extended log flag before checking length
  powerpc: Fix corruption when grabbing FWNMI data
  powerpc: Rework pseries machine check handler
  powerpc: Don't silently handle machine checks from userspace
  powerpc: Remove duplicate debugger hook in machine_check_exception
  powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check
  powerpc: Don't force MSR_RI in machine_check_exception
  powerpc: Print 32 bits of DSISR in show_regs
  powerpc/kdump: Disable ftrace during kexec
  powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler
  powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare
  powerpc/kexec: Don't initialise kexec hooks to default handlers
  powerpc/kdump: Remove ppc_md.machine_crash_shutdown
  powerpc/kexec: Remove ppc_md.machine_kexec
  ...

8 years agomm: System without MMU do not need pte_mkwrite
Michal Simek [Fri, 21 Jan 2011 07:49:56 +0000]
mm: System without MMU do not need pte_mkwrite

The patch "thp: export maybe_mkwrite" (commit 14fd403f2146) breaks
systems without MMU.

Error log:

CC arch/microblaze/mm/init.o
  In file included from include/linux/mman.h:14,
                   from arch/microblaze/mm/consistent.c:24:
  include/linux/mm.h: In function 'maybe_mkwrite':
  include/linux/mm.h:482: error: implicit declaration of function 'pte_mkwrite'
  include/linux/mm.h:482: error: incompatible types in assignment

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: Update Roland Dreier's email address
Roland Dreier [Fri, 21 Jan 2011 00:23:08 +0000]
MAINTAINERS: Update Roland Dreier's email address

The cisco.com address will stop working soon, and besides no one can
remember the second "d" in "rolandd" or how to spell "rdreier."

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoxen: p2m: correctly initialize partial p2m leaf
Stefan Bader [Thu, 20 Jan 2011 14:38:23 +0000]
xen: p2m: correctly initialize partial p2m leaf

After changing the p2m mapping to a tree by

  commit 58e05027b530ff081ecea68e38de8d59db8f87e0
    xen: convert p2m to a 3 level tree

and trying to boot a DomU with 615MB of memory, the following crash was
observed in the dump:

kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c0107397>] xen_set_pte+0x27/0x60
*pdpt = 0000000000000000 *pde = 0000000000000000

Adding further debug statements showed that when trying to set up
pfn=0x26700 the returned mapping was invalid.

pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003)
pfn=0x26700 calling set_pte(0xc1fe7800, 0x3)

Although the last_pfn obtained from the startup info is 0x26700, which
should in turn not be hit, the additional 8MB which are added as extra
memory normally seem to be ok. This lead to looking into the initial
p2m tree construction, which uses the smaller value and assuming that
there is other code handling the extra memory.

When the p2m tree is set up, the leaves are directly pointed to the
array which the domain builder set up. But if the mapping is not on a
boundary that fits into one p2m page, this will result in the last leaf
being only partially valid. And as the invalid entries are not
initialized in that case, things go badly wrong.

I am trying to fix that by checking whether the current leaf is a
complete map and if not, allocate a completely new page and copy only
the valid pointers there. This may not be the most efficient or elegant
solution, but at least it seems to allow me booting DomUs with memory
assignments all over the range.

BugLink: http://bugs.launchpad.net/bugs/686692
[v2: Redid a bit of commit wording and fixed a compile warning]

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

8 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Fri, 21 Jan 2011 15:33:37 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Fix deadlock during path resolution

8 years agoum: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:46:24 +0000]
um: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Dike <jdike@addtoit.com>

8 years agotile: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:44:43 +0000]
tile: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>

8 years agosparc: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:43:56 +0000]
sparc: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "David S. Miller" <davem@davemloft.net>

8 years agoscore: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:41:19 +0000]
score: Use generic irq Kconfig

No functional change

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chen Liqin <liqin.chen@sunplusct.com>

8 years agopowerpc: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:39:39 +0000]
powerpc: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

8 years agoparisc: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:38:30 +0000]
parisc: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>

8 years agomn10300: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:36:02 +0000]
mn10300: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>

8 years agomicroblaze: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:35:05 +0000]
microblaze: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michal Simek <monstr@monstr.eu>

8 years agom68knommu: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:34:21 +0000]
m68knommu: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Ungerer <gerg@uclinux.org>

8 years agoia64: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:32:46 +0000]
ia64: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tony Luck <tony.luck@intel.com>

8 years agofrv: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:32:04 +0000]
frv: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Howells <dhowells@redhat.com>

8 years agoblackfin: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:29:58 +0000]
blackfin: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Frysinger <vapier@gentoo.org>

8 years agoalpha: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 19:27:11 +0000]
alpha: Use generic irq Kconfig

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>

8 years agogenirq: Remove __do_IRQ
Thomas Gleixner [Wed, 19 Jan 2011 18:41:35 +0000]
genirq: Remove __do_IRQ

All architectures are finally converted. Remove the cruft.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>

8 years agom32r: Convert to generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 18:17:10 +0000]
m32r: Convert to generic irq Kconfig

Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as
we have converted all irq_chip functions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert usrv platform irq handling
Thomas Gleixner [Wed, 19 Jan 2011 18:10:18 +0000]
m32r: Convert usrv platform irq handling

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert opsput_lcdpld irq chip
Thomas Gleixner [Wed, 19 Jan 2011 18:01:23 +0000]
m32r: Convert opsput_lcdpld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert opsput lanpld irq chip
Thomas Gleixner [Wed, 19 Jan 2011 17:58:45 +0000]
m32r: Convert opsput lanpld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert opsput pld irq chip
Thomas Gleixner [Wed, 19 Jan 2011 17:55:09 +0000]
m32r: Convert opsput pld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert opsput irq chip
Thomas Gleixner [Wed, 19 Jan 2011 17:48:15 +0000]
m32r: Convert opsput irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert oaks32r irq chips
Thomas Gleixner [Wed, 19 Jan 2011 17:44:10 +0000]
m32r: Convert oaks32r irq chips

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert mappi3 irq chip
Thomas Gleixner [Wed, 19 Jan 2011 17:39:27 +0000]
m32r: Convert mappi3 irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert mappi2 irq chip
Thomas Gleixner [Wed, 19 Jan 2011 17:34:51 +0000]
m32r: Convert mappi2 irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert mappi irq chips
Thomas Gleixner [Wed, 19 Jan 2011 17:27:59 +0000]
m32r: Convert mappi irq chips

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert m32700ut lcdpld irq chip
Thomas Gleixner [Wed, 19 Jan 2011 17:19:42 +0000]
m32r: Convert m32700ut lcdpld irq chip

Convert the irq chip to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert m32700ut lanpld irq chip
Thomas Gleixner [Wed, 19 Jan 2011 17:14:21 +0000]
m32r: Convert m32700ut lanpld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert m32700ut pld irq chip
Thomas Gleixner [Wed, 19 Jan 2011 16:41:51 +0000]
m32r: Convert m32700ut pld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert m32104ut irq chip
Thomas Gleixner [Tue, 11 Jan 2011 09:43:49 +0000]
m32r: Convert m32104ut irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Convert m32104ut irq handling
Thomas Gleixner [Wed, 19 Jan 2011 16:02:29 +0000]
m32r: Convert m32104ut irq handling

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agom32r: Cleanup direct irq_desc access
Thomas Gleixner [Wed, 22 Sep 2010 17:13:16 +0000]
m32r: Cleanup direct irq_desc access

The irq descriptors are already initialized by the generic
code. Remove the redundant init code and set the irq chip with the
proper accessor function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agocris: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 13:20:13 +0000]
cris: Use generic irq Kconfig

Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as
we have converted all irq_chip functions. Fix the fallout in
show_interrupts().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mikael Starvik <starvik@axis.com>

8 years agocris: Convert V32 interrupt handling
Thomas Gleixner [Wed, 19 Jan 2011 13:05:30 +0000]
cris: Convert V32 interrupt handling

Convert the irq chip functions and install handle_simple_irq for each
interrupt to get rid of __do_IRQ()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mikael Starvik <starvik@axis.com>

8 years agocris: Convert V10 interrupt handling
Thomas Gleixner [Wed, 19 Jan 2011 12:54:54 +0000]
cris: Convert V10 interrupt handling

Convert the irq_chip functions and install handle_simple_irq for each
interrupt. This converts V10 to the flow handling and lets us remove
__do_IRQ().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mikael Starvik <starvik@axis.com>

8 years agocris: Use irq handling wrapper
Thomas Gleixner [Wed, 19 Jan 2011 12:59:01 +0000]
cris: Use irq handling wrapper

Use the wrapper around __do_IRQ() so we can convert V10 and V32
seperately.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mikael Starvik <starvik@axis.com>

8 years agoh8300: Use generic irq Kconfig
Thomas Gleixner [Wed, 19 Jan 2011 11:26:32 +0000]
h8300: Use generic irq Kconfig

Switch to the generic irq Kconfig. h8300 has all irq chips converted
to the new functions, so select the GENERIC_HARDIRQS_NO_DEPRECATED
switch as well. Fixup the resulting fallout in show_interrupts().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agoh8300: Convert interrupt handling to flow handler
Thomas Gleixner [Wed, 19 Jan 2011 11:18:57 +0000]
h8300: Convert interrupt handling to flow handler

__do_IRQ is deprecated so h8300 needs to be converted to proper flow
handling. The irq chip is simple and does not required any
mask/ack/eoi functions, so we can use handle_simple_irq.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>

8 years agoh8300: Convert to new irq_chip functions
Thomas Gleixner [Wed, 19 Jan 2011 11:15:29 +0000]
h8300: Convert to new irq_chip functions

No functional change, just straight forward conversion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Paul Mundt <lethal@linux-sh.org>