9 years agokbuild: Really don't clean bounds.h and asm-offsets.h
Michal Marek [Tue, 9 Mar 2010 15:00:20 +0000]
kbuild: Really don't clean bounds.h and asm-offsets.h

Commit 7d3cc8b tried to keep bounds.h and asm-offsets.h during make
clean by filtering these out of $(clean-files), but they are listed in
$(targets) and $(always) and thus removed automatically. Introduce a new
$(no-clean-files) variable to really skip such files in Makefile.clean.

Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoscripts/Makefile.lib: Align the output of LZO
Wu Zhangjin [Thu, 11 Mar 2010 09:42:14 +0000]
scripts/Makefile.lib: Align the output of LZO

The output of LZO is not aligned with the other output:
  ...
CC drivers/usb/mon/usbmon.mod.o
  LZO    arch/mips/boot/compressed/vmlinux.lzo
  ...

This patch fixes it.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: Generate modules.builtin in make modules_install
Michal Marek [Wed, 10 Mar 2010 11:28:58 +0000]
kbuild: Generate modules.builtin in make modules_install

The previous approach didn't work if one did
make modules && make modules_install
Add modules.builtin as dependency of _modinst_, which is the target that
actually needs the file.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRevert "kbuild: specify absolute paths for cscope"
Michal Marek [Mon, 8 Mar 2010 09:26:22 +0000]
Revert "kbuild: specify absolute paths for cscope"

This reverts commit eb8f844c0a41c4529a7d06b7801296eca9ae67aa. Ian
Campbell writes:
> I keep my kernel source tree on a more powerful build box where I run my
> builds etc (including "make cscope") but run my editor from my
> workstation with an NFS mount to the source. This worked fine for me
> using relative paths for cscope. Using absolute paths in cscope breaks
> this previously working setup because the root path is not the same on
> both systems. I guess this is similar to moving the source tree around.
>
> Without wanting to start a flamewar it really sounds to me like we are
> working around a vim (or cscope) bug here, emacs with cscope bindings
> works fine in this configuration.

Given that absolute paths can be forced by make O=. cscope, change the
default back to relative paths.

Ian Campbell <ijc@hellion.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: Do not unnecessarily regenerate modules.builtin
Michal Marek [Mon, 8 Mar 2010 09:07:12 +0000]
kbuild: Do not unnecessarily regenerate modules.builtin

Only regenerate it if the configuration has changed. Also, do this after
the modules build to fix errors with some weird Makefiles that are
generated during build.

Reported-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoheaders_install: use local file handles
Stephen Hemminger [Mon, 22 Feb 2010 23:17:26 +0000]
headers_install: use local file handles

Better practice to use 3 arg open and local file handles.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoheaders_check: fix perl warnings
Stephen Hemminger [Mon, 22 Feb 2010 23:17:24 +0000]
headers_check: fix perl warnings

According to PBP; best way practice is to use local reference for file
handle and three argument open. Also perl prototypes are a mistake.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoexport_report: fix perl warnings
Stephen Hemminger [Mon, 22 Feb 2010 23:17:22 +0000]
export_report: fix perl warnings

Use local file handles, use three argument open.
Don't modify arguments in perl grep (use sed instead)

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoprofile2linkerlist: fix perl warnings
Stephen Hemminger [Mon, 22 Feb 2010 23:17:20 +0000]
profile2linkerlist: fix perl warnings

Turn on strict checking.
Simplify code by using "unless" statement.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agonamespace: perlcritic warnings
Stephen Hemminger [Mon, 22 Feb 2010 23:17:18 +0000]
namespace: perlcritic warnings

Use local file handle not global.
Make loop and other variables local in scope.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Hui Zhu <teawater@gmail.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agocheckversion: perl cleanup
Stephen Hemminger [Mon, 22 Feb 2010 23:17:14 +0000]
checkversion: perl cleanup

Turn on strict checking.
Use three arguement open
Standard practice in perl is to use undef not zero for false

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agocheckincludes: fix perlcritic warnings
Stephen Hemminger [Mon, 22 Feb 2010 23:17:12 +0000]
checkincludes: fix perlcritic warnings

Turn on strict checking.
Use local file handles.
Use three argument open.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Cong Wang <amwang@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoscripts: improve checkstack
Stephen Hemminger [Mon, 22 Feb 2010 23:17:09 +0000]
scripts: improve checkstack

Cleanup checkstack script:
  * Turn on strict checking
  * Fix resulting error message because the declaration syntax
    was incorrect.
  * Remove incorrect and misleading use of prototype
     - prototype not required for this type of sort function
       because $a and $b are being used in this contex
     - if prototype was being used it should be for both arguments
  * Use closure for sort function

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: deb-pkg md5sums
FEJES Jozsef [Fri, 5 Mar 2010 17:19:36 +0000]
kbuild: deb-pkg md5sums

This patch creates the standard md5sums file for 'make deb-pkg' just
like the dh_md5sums debhelper script.

Signed-off-by: Jozsef Fejes <fejes@joco.name>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .text.start to .text..start.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:57 +0000]
Rename .text.start to .text..start.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename special text sections in arch/frv from .text.XXX to .text..XXX.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:56 +0000]
Rename special text sections in arch/frv from .text.XXX to .text..XXX.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.lock_aligned to .data..lock_aligned.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:55 +0000]
Rename .data.lock_aligned to .data..lock_aligned.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.initvect to .data..initvect.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:54 +0000]
Rename .data.initvect to .data..initvect.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.init to .data..init.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:53 +0000]
Rename .data.init to .data..init.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.nosave to .data..nosave.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:52 +0000]
Rename .data.nosave to .data..nosave.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .text.startup to .text..startup.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:51 +0000]
Rename .text.startup to .text..startup.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .text.page_aligned to .text..page_aligned.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:49 +0000]
Rename .text.page_aligned to .text..page_aligned.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .text.lock to .text..lock.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:48 +0000]
Rename .text.lock to .text..lock.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .text.ivt to .text..ivt.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:47 +0000]
Rename .text.ivt to .text..ivt.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .rodata.compressed to .rodata..compressed.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:46 +0000]
Rename .rodata.compressed to .rodata..compressed.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.vmpages and .data.vm0.XXX to .data..vmpages and .data..vm0.XXX.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:45 +0000]
Rename .data.vmpages and .data.vm0.XXX to .data..vmpages and .data..vm0.XXX.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.read_mostly to .data..read_mostly.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:44 +0000]
Rename .data.read_mostly to .data..read_mostly.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data[.percpu][.XXX] to .data[..percpu][..XXX].
Denys Vlasenko [Sat, 20 Feb 2010 00:03:43 +0000]
Rename .data[.percpu][.XXX] to .data[..percpu][..XXX].

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data..patch.XXX to .data..patch.XXX.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:42 +0000]
Rename .data..patch.XXX to .data..patch.XXX.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.init_irqstack to .data..init_irqstack.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:41 +0000]
Rename .data.init_irqstack to .data..init_irqstack.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.gate to .data..gate.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:40 +0000]
Rename .data.gate to .data..gate.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .bss.stack to .bss..stack.
Denys Vlasenko [Sat, 20 Feb 2010 00:03:39 +0000]
Rename .bss.stack to .bss..stack.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .bss.page_aligned to .bss..page_aligned.
Tim Abbott [Sat, 20 Feb 2010 00:03:38 +0000]
Rename .bss.page_aligned to .bss..page_aligned.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.page_aligned to .data..page_aligned.
Tim Abbott [Sat, 20 Feb 2010 00:03:37 +0000]
Rename .data.page_aligned to .data..page_aligned.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agopowerpc: remove unused __page_aligned definition.
Tim Abbott [Sat, 20 Feb 2010 00:03:36 +0000]
powerpc: remove unused __page_aligned definition.

There is already an architecture-independent __page_aligned_data macro
for this purpose, so removing the powerpc-specific macro should be
harmless.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.init_task to .data..init_task.
Tim Abbott [Sat, 20 Feb 2010 00:03:35 +0000]
Rename .data.init_task to .data..init_task.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoRename .data.cacheline_aligned to .data..cacheline_aligned.
Tim Abbott [Sat, 20 Feb 2010 00:03:34 +0000]
Rename .data.cacheline_aligned to .data..cacheline_aligned.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agotags: Add the ability to make tags for all archs using "all"
John Kacur [Tue, 2 Mar 2010 15:57:52 +0000]
tags: Add the ability to make tags for all archs using "all"

make ALLSOURCE_ARCHS=all tags
- Document this in kbuild.txt
Without this change you have to type each arch separately.

Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agotags: Fix spelling error in comment (is->if)
John Kacur [Tue, 2 Mar 2010 14:38:10 +0000]
tags: Fix spelling error in comment (is->if)

Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agotags: Use $SRCARCH
Michal Marek [Fri, 19 Feb 2010 15:18:41 +0000]
tags: Use $SRCARCH

$ make mrproper
$ make tags
  GEN     tags
  find: `arch/x86_64/': No such file or directory

Caused by commit f81b1be (tags: include headers before source files)

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: fix a couple of typos in Documentation
Kirill Smelkov [Wed, 17 Feb 2010 08:45:33 +0000]
kbuild: fix a couple of typos in Documentation

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agotags: include headers before source files
Guennadi Liakhovetski [Sun, 7 Feb 2010 23:25:59 +0000]
tags: include headers before source files

Currently looking up a structure definition in TAGS / tags takes one to
one of multiple "static struct X" definitions in arch sources, which makes
it for many structs practically impossible to get to the required header.
This patch changes the order of sources being tagged to first scan
architecture includes, then the top-level include/ directory, and only
then the rest. It also takes into account, that many architectures have
more than one include directory, i.e., not only arch/$ARCH/include, but
also arch/$ARCH/mach-X/include etc.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
[mmarek@suse.cz: fix 'var+=text' bashism]
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: move -fno-dwarf2-cfi-asm to powerpc only
Andi Kleen [Tue, 2 Feb 2010 22:40:02 +0000]
kbuild: move -fno-dwarf2-cfi-asm to powerpc only

Better dwarf2 unwind information is a good thing, it allows better
debugging with kgdb and crash and helps systemtap.

Commit 003086497f07f7f1e67c0c295e261740f822b377 ("Build with
-fno-dwarf2-cfi-asm") disabled some CFI information globally to work
around a module loader bug on powerpc.

But this disables the better unwind tables for all architectures, not just
powerpc.  Move the workaround to powerpc and also add a suitable comment
that's it really a workaround.

This improves dwarf2 unwind tables on x86 at least.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agomarkup_oops.pl: minor fixes
Hui Zhu [Mon, 1 Feb 2010 05:41:22 +0000]
markup_oops.pl: minor fixes

1. Fix a little format issue.
2. Check the return of "Getopt::Long::GetOptions".  Output usage and
   exit if it get error.
3. Change $ARGV[$#ARGV] to $ARGV[0].
4. Change the code which get $modulefile from modinfo.  Replace the
   pipeline with `modinfo -F filename $module`.
4. Change usage from "Specify the module directory name" to "Specify the
   module filename".

Signed-off-by: Hui Zhu <teawater@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agomarkup_oops.pl: add options to improve cross-sompilation environments
Hui Zhu [Tue, 26 Jan 2010 09:13:07 +0000]
markup_oops.pl: add options to improve cross-sompilation environments

The markup_oops.pl have 3 troubles to support cross-compiler environment:
1.  It use objdump directly.
2.  It use modinfo to get the message of module.
3.  It use hex function that cannot support 64-bit number in 32-bit arch.

This patch add 3 options to markup_oops.pl:
1. -c CROSS_COMPILE Specify the prefix used for toolchain.
2. -m MODULE_DIRNAME Specify the module directory name.
3. Change hex function to Math::BigInt->from_hex.

After this patch, parse the x8664 oops in x86, we can:
cat amd64m | perl ~/kernel/tmp/m.pl -c /home/teawater/kernel/bin/x8664- -m ./e.ko vmlinux

Thanks,
Hui

Signed-off-by: Hui Zhu <teawater@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: ozan@pardus.org.tr
Cc: Matthew Wilcox <willy@linux.intel.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoMerge branch 'modpost' of git://git.pengutronix.de/git/ukl/linux-2.6 into kbuild...
Michal Marek [Tue, 2 Feb 2010 15:21:08 +0000]
Merge branch 'modpost' of git://git.pengutronix.de/git/ukl/linux-2.6 into kbuild/for-next

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoMAINTAINERS: add a few more patterns to kbuild
Michal Marek [Fri, 29 Jan 2010 13:22:43 +0000]
MAINTAINERS: add a few more patterns to kbuild

Also, add a note that "unmaintained" files below scripts/ should go via
the kbuild tree (best current practice).

Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoscripts: use %_tmppath in "make rpm-pkg"
John Saalwaechter [Mon, 1 Feb 2010 00:18:58 +0000]
scripts: use %_tmppath in "make rpm-pkg"

The mkspec script hardcodes "/var/tmp" into the generated rpm spec file's
BuildRoot. The user, however, may have a custom setting for %_tmppath,
which should be used in BuildRoot.  This patch changes mkspec's
BuildRoot output to appropriately use %_tmppath.

Signed-off-by: John Saalwaechter <saalwaechter@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agomarkup_oops.pl: fix for faulting instruction in the first line of a range
Hui Zhu [Thu, 28 Jan 2010 06:58:02 +0000]
markup_oops.pl: fix for faulting instruction in the first line of a range

I got a "No matching code found" when I use markup_oops.pl parse a error
in a x86_64 module.

cat e.c

int init_module(void)
{
char *buf = 0;

buf[0] = 3;

return 0;
}

void cleanup_module(void)
{
//char *buf = 0;

//buf[0] = 3;
}

MODULE_AUTHOR("Hui Zhu");
MODULE_LICENSE("GPL");

0000000000000000 <init_module>:
init_module():
/home/teawater/study/kernel/stack2core/example/e.c:10
   0: c6 04 25 00 00 00 00  movb   $0x3,0x0
   7: 03
/home/teawater/study/kernel/stack2core/example/e.c:13
   8: 31 c0                 xor    %eax,%eax
   a: c3                    retq
   b: 0f 1f 44 00 00        nopl   0x0(%rax,%rax,1)

0000000000000010 <cleanup_module>:
cleanup_module():
/home/teawater/study/kernel/stack2core/example/e.c:20
  10: f3 c3                 repz retq
  12: 90                    nop
  13: 90                    nop
Disassembly of section .modinfo:

This is because the faulting instruction "movb   $0x3,0x0" is the first
line of the range.

In the markup_oops.pl:
main::(./scripts/markup_oops.pl:245):
245: if (InRange($1, $target)) {
  DB<2> p $line
ffffffffa001b000: c6 04 25 00 00 00 00  movb   $0x3,0x0
  DB<3> p $counter
0

It just set $center in next loop. So it cannot get the $center.

And even if $center is set to the right value 0.
if ($center == 0) {
print "No matching code found \n";
exit;
}
The first line $center will be 0, so I change the default value to -1.

Signed-off-by: Hui Zhu <teawater@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoscripts: change scripts to use system python instead of env
Don Zickus [Tue, 26 Jan 2010 22:20:41 +0000]
scripts: change scripts to use system python instead of env

Just a small change to a couple of scripts to go from

 #!/usr/bin/env python

to

 #!/usr/bin/python

This shouldn't effect anyone, unless they don't install python there.

In preparation for python3, Fedora is doing a big push to change the scripts
to use the system python.  This allows developers to put the python3 in
their path without fear of breaking existing scripts.

Now I am pretty sure anyone using python3 for testing purposes will probably
not run any of the scripts I changed, but Fedora has this automated tool
that checks for this stuff so I thought I would try to push it upstream.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoscripts/kallsyms: suppress build warning
Himanshu Chauhan [Thu, 28 Jan 2010 00:53:20 +0000]
scripts/kallsyms: suppress build warning

Suppress a warn_unused_result warning.

fgets is called as a part of error handling.  It is called just to drop a
line and return immediately.  read_map is reading the file in a loop and
read_symbol reads line by line.  So I think there is no point in using
return value for useful checking.  Other checks like 3 items were returned
or !EOF have already been done.

Signed-off-by: Himanshu Chauhan <hschauhan@nulltrace.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoscripts/mkcompile_h: don't test for hardcoded paths
Michal Marek [Wed, 27 Jan 2010 08:46:23 +0000]
scripts/mkcompile_h: don't test for hardcoded paths

Don't test for /bin/{dnsdomainname,domainname}, simply try to execute
the command and check if it returned something.

Reported-by: Glenn Sommer <glemsom@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Tested-by: Glenn Sommer <glemsom@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoImprove kconfig symbol hashing
Andi Kleen [Wed, 13 Jan 2010 16:02:44 +0000]
Improve kconfig symbol hashing

While looking for something else I noticed that the symbol
hash function used by kconfig is quite poor. It doesn't
use any of the standard hash techniques but simply
adds up the string and then uses power of two masking,
which is both known to perform poorly.

The current x86 kconfig has over 7000 symbols.

When I instrumented it showed that the minimum hash chain
length was 16 and a significant number of them was over
30.

It didn't help that the hash table size was only 256 buckets.

This patch increases the hash table size to a larger prime
and switches to a FNV32 hash. I played around with a couple of hash
functions, but that one seemed to perform best with reasonable
hash table sizes.

Increasing the hash table size even further didn't
seem like a good idea, because there are a couple of global
walks which walk the complete hash table.

I also moved the unnamed bucket to 0. It's still the longest
of all the buckets (44 entries), but hopefully it's not
often hit except for the global walk which doesn't care.

The result is a much nicer distribution:
(first column bucket length, second number of buckets with that length)

1: 3505
2: 1236
3: 294
4: 52
5: 3
47: 1 <--- this is the unnamed symbols bucket

There are still some 5+ buckets, but increasing the hash table
even more would be likely not worth it.

This also cleans up the code slightly by removing hard coded
magic numbers.

I didn't notice a big performance difference either way
on my Nehalem system, but I presume it'll help somewhat
on slower systems.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoMakefile: Document ability to make file.lst and file.S
Joe Perches [Wed, 13 Jan 2010 17:31:44 +0000]
Makefile: Document ability to make file.lst and file.S

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: improve version string logic
David Rientjes [Wed, 13 Jan 2010 21:01:05 +0000]
kbuild: improve version string logic

The LOCALVERSION= string passed to "make" will now always be appended to
the kernel version after CONFIG_LOCALVERSION, if it exists, regardless of
whether CONFIG_LOCALVERSION_AUTO is set or not.  This allows users to
uniquely identify their kernel builds with a string.

If CONFIG_LOCALVERSION_AUTO is enabled, the unique SCM tag reported by
setlocalversion (or .scmversion) is appended to the kernel version, if it
exists.  When CONFIG_LOCALVERSION_AUTO is not enabled, a `+' is appended
to the kernel version to represent that the kernel has been revised since
the last release unless "make LOCALVERSION=" was used to uniquely identify
the build.

The end result is this:

 - when LOCALVERSION= is passed to "make", it is appended to the kernel
   version,

 - when CONFIG_LOCALVERSION_AUTO is enabled, a unique SCM identifier is
   appended if the respository has been revised beyond a tagged commit,
   and

 - when CONFIG_LOCALVERSION_AUTO is disabled, a `+' is appended if the
   repository has been revised beyond a tagged commit and LOCALVERSION=
   was not passed to "make".

Examples:

With CONFIG_LOCALVERSION_AUTO: "make" results in
v2.6.32-rc4-00149-ga3ccf63.  If there are uncommited changes to the
respository, it results in v2.6.32-rc4-00149-ga3ccf63-dirty.  If
"make LOCALVERSION=kbuild" were used, it results in
v2.6.32-rc4-kbuild-00149-ga3ccf63-dirty.

Without CONFIG_LOCALVERSION_AUTO, "make" results in v2.6.32-rc4+
unless the repository is at the Linux v2.6.32-rc4 commit (in which
case the version would be v2.6.32-rc4).  If "make LOCALVERSION=kbuild"
were used, it results in v2.6.32-rc4-kbuild.

Also renames variables such as localver-auto and _localver-auto to more
accurately describe what they represent: localver-extra and
scm-identifier, respectively.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agonconfig: minor fix
Nir Tzachar [Wed, 13 Jan 2010 05:32:35 +0000]
nconfig: minor fix

This patch fixes two problems reported by Jan Engelhardt:
1) Border is now properly placed, to always be visible
2) Long menu items are properly displayed

Reported-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agonconfig: mark local functions as such
Michal Marek [Thu, 7 Jan 2010 12:59:57 +0000]
nconfig: mark local functions as such

scripts/kconfig/nconf.gui.c:23: warning: no previous prototype for 'set_normal_colors'
scripts/kconfig/nconf.gui.c:68: warning: no previous prototype for 'normal_color_theme'
scripts/kconfig/nconf.gui.c:100: warning: no previous prototype for 'no_colors_theme'
scripts/kconfig/nconf.c:455: warning: no previous prototype for 'process_special_keys'
scripts/kconfig/nconf.c:487: warning: no previous prototype for 'get_next_hot'
scripts/kconfig/nconf.c:506: warning: no previous prototype for 'canbhot'
scripts/kconfig/nconf.c:514: warning: no previous prototype for 'is_hot'
scripts/kconfig/nconf.c:522: warning: no previous prototype for 'make_hot'
scripts/kconfig/nconf.c:582: warning: no previous prototype for 'item_make'
scripts/kconfig/nconf.c:626: warning: no previous prototype for 'item_add_str'
scripts/kconfig/nconf.c:656: warning: no previous prototype for 'item_tag'
scripts/kconfig/nconf.c:668: warning: no previous prototype for 'curses_item_index'
scripts/kconfig/nconf.c:673: warning: no previous prototype for 'item_data'
scripts/kconfig/nconf.c:684: warning: no previous prototype for 'item_is_tag'
scripts/kconfig/nconf.c:691: warning: no previous prototype for 'set_config_filename'

Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokconfig: new configuration interface (nconfig)
nir.tzachar@gmail.com [Wed, 25 Nov 2009 10:28:43 +0000]
kconfig: new configuration interface (nconfig)

This patch was inspired by the kernel projects page, where an ncurses
replacement for menuconfig was mentioned (by Sam Ravnborg).

Building on menuconfig, this patch implements a more modern look
interface using ncurses and ncurses' satellite libraries (menu, panel,
form). The implementation does not depend on lxdialog, which is
currently distributed with the kernel.

Signed-off-by: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agogenksyms: close ref_file after use
Alexander Beregalov [Thu, 7 Jan 2010 02:22:41 +0000]
genksyms: close ref_file after use

It is the last place when the file is read, so close it.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agomenuconfig: wrap long help lines
Vadim Bendebury (вб) [Sun, 20 Dec 2009 08:29:49 +0000]
menuconfig: wrap long help lines

Help text for certain config options is very extensive (the text
includes the names of all  other options the option in question depends
on). Long lines are not wrapped, making it impossible to see the list
without scrolling horizontally.

This patch adds some logic which wraps help screen lines at word
boundaries to prevent truncating.

Tested by running

  ARCH=powerpc make menuconfig O=/tmp/build

which shows that the long lines are now wrapped, and

 ARCH=powerpc make xconfig O=/tmp/build

to demonstrate that it still compiles and operates as expected.

Signed-off-by: Vadim Bendebury <vbendeb@google.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoscripts: add ARM support to decodecode
Rabin Vincent [Tue, 5 Jan 2010 14:57:58 +0000]
scripts: add ARM support to decodecode

This patch adds support for decoding ARM oopses to scripts/decodecode.
The following things are handled:

 - ARCH and CROSS_COMPILE environment variables are respected.

 - The Code: in x86 oopses is in bytes, while it is in either words (4
   bytes) or halfwords for ARM.

 - Some versions of ARM objdump refuse to disassemble instructions
   generated by literal constants (".word 0x...").  The workaround is to
   strip the object file first.

 - The faulting instruction is marked (liked so) in ARM, but <like so>
   in x86.

 - ARM mnemonics may include characters such as [] which need to be
   escaped before being passed to sed for the "<- trapping instruction"
   substitution.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokconfig CROSS_COMPILE option
Roland McGrath [Tue, 22 Dec 2009 00:24:06 +0000]
kconfig CROSS_COMPILE option

This adds CROSS_COMPILE as a kconfig string so you can store it in
.config.  Then you can use plain "make" in the configured kernel build
directory to do the right cross compilation without setting the
command-line or environment variable every time.

With this, you can set up different build directories for different kernel
configurations, whether native or cross-builds, and then use the simple:

make -C /build/dir M=module-source-dir

idiom to build modules for any given target kernel, indicating which one
by nothing but the build directory chosen.

I tried a version that defaults the string with env="CROSS_COMPILE" so
that in a "make oldconfig" with CROSS_COMPILE in the environment you can
just hit return to store the way you're building it.  But the kconfig
prompt for strings doesn't give you any way to say you want an empty
string instead of the default, so I punted that.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Anibal Monsalve Salazar <anibal@debian.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: Fix linking error built-in.o no such file or directory
Jiafu He [Fri, 18 Dec 2009 01:22:13 +0000]
kbuild: Fix linking error built-in.o no such file or directory

This patch fixes the link error "built-in.o: no such file or directory".
The problem happens if "dirx/Makefile" contains only "obj-m += diry/
dirz/" and the empty "dirx/built-in.o" is missing. Adding $(subdir-m)
into check for builtin-target fixes this error.

Signed-off-by: Jiafu He <jay@goldhive.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agomodpost: don't allow *driver to reference .init.*
Uwe Kleine-König [Sat, 30 Jan 2010 20:14:23 +0000]
modpost: don't allow *driver to reference .init.*

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9 years agomodpost: make symbol white list a per mismatch type variable
Uwe Kleine-König [Sat, 30 Jan 2010 19:52:50 +0000]
modpost: make symbol white list a per mismatch type variable

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9 years agomodpost: remove now unused NO_MISMATCH constant
Uwe Kleine-König [Sat, 30 Jan 2010 15:57:48 +0000]
modpost: remove now unused NO_MISMATCH constant

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9 years agomodpost: pass around const struct sectioncheck * instead of enum mismatch
Uwe Kleine-König [Sat, 30 Jan 2010 15:56:20 +0000]
modpost: pass around const struct sectioncheck * instead of enum mismatch

This prepares having a per-check whitelist of symbol names.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9 years agomodpost: give most mismatch constants a better name
Uwe Kleine-König [Sat, 30 Jan 2010 15:35:47 +0000]
modpost: give most mismatch constants a better name

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9 years agoLinux 2.6.33-rc6
Linus Torvalds [Fri, 29 Jan 2010 21:57:50 +0000]
Linux 2.6.33-rc6

9 years agomodpost: define ALL_XXX{IN,EX}IT_SECTIONS
Uwe Kleine-König [Fri, 29 Jan 2010 11:04:26 +0000]
modpost: define ALL_XXX{IN,EX}IT_SECTIONS

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9 years agomodpost: members of *driver structs should not point to __init functions
Uwe Kleine-König [Fri, 29 Jan 2010 10:40:38 +0000]
modpost: members of *driver structs should not point to __init functions

Either the functions referred to in a driver struct should live in
.devinit or the driver should be registered using platform_driver_probe
(or equivalent for different driver types) with ->probe being NULL.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9 years agomfd: Fix asic3 build
Dmitry Artamonow [Sat, 23 Jan 2010 21:20:20 +0000]
mfd: Fix asic3 build

asic3 also needs tmio_core or otherwise will fail to build.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 29 Jan 2010 19:15:32 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: update multi-touch protocol documentation
  Input: add the ABS_MT_PRESSURE event
  Input: winbond-cir - remove dmesg spam
  Input: lifebook - add another Lifebook DMI signature
  Input: ad7879 - support auxiliary GPIOs via gpiolib

9 years agomm: fix migratetype bug which slowed swapping
Hugh Dickins [Fri, 29 Jan 2010 17:46:34 +0000]
mm: fix migratetype bug which slowed swapping

After memory pressure has forced it to dip into the reserves, 2.6.32's
5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu
list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE
pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves.

Fix that in the most straightforward way (which, considering the overheads
of alternative approaches, is Mel's preference): the right migratetype is
already in page_private(page), but free_pcppages_bulk() wasn't using it.

How did this bug show up?  As a 20% slowdown in my tmpfs loop kbuild
swapping tests, on PowerMac G5 with SLUB allocator.  Bisecting to that
commit was easy, but explaining the magnitude of the slowdown not easy.

The same effect appears, but much less markedly, with SLAB, and even
less markedly on other machines (the PowerMac divides into fewer zones
than x86, I think that may be a factor).  We guess that lumpy reclaim
of short-lived high-order pages is implicated in some way, and probably
this bug has been tickling a poor decision somewhere in page reclaim.

But instrumentation hasn't told me much, I've run out of time and
imagination to determine exactly what's going on, and shouldn't hold up
the fix any longer: it's valid, and might even fix other misbehaviours.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Fri, 29 Jan 2010 18:27:37 +0000]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: check total number of devices when removing missing
  Btrfs: check return value of open_bdev_exclusive properly
  Btrfs: do not mark the chunk as readonly if in degraded mode
  Btrfs: run orphan cleanup on default fs root
  Btrfs: fix a memory leak in btrfs_init_acl
  Btrfs: Use correct values when updating inode i_size on fallocate
  Btrfs: remove tree_search() in extent_map.c
  Btrfs: Add mount -o compress-force

9 years agosparc: TIF_ABI_PENDING bit removal
David Miller [Fri, 29 Jan 2010 05:42:02 +0000]
sparc: TIF_ABI_PENDING bit removal

Here are the sparc bits to remove TIF_ABI_PENDING now that
set_personality() is called at the appropriate place in exec.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agox86: get rid of the insane TIF_ABI_PENDING bit
H. Peter Anvin [Fri, 29 Jan 2010 06:14:43 +0000]
x86: get rid of the insane TIF_ABI_PENDING bit

Now that the previous commit made it possible to do the personality
setting at the point of no return, we do just that for ELF binaries.
And suddenly all the reasons for that insane TIF_ABI_PENDING bit go
away, and we can just make SET_PERSONALITY() just do the obvious thing
for a 32-bit compat process.

Everything becomes much more straightforward this way.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoSplit 'flush_old_exec' into two functions
Linus Torvalds [Fri, 29 Jan 2010 06:14:42 +0000]
Split 'flush_old_exec' into two functions

'flush_old_exec()' is the point of no return when doing an execve(), and
it is pretty badly misnamed.  It doesn't just flush the old executable
environment, it also starts up the new one.

Which is very inconvenient for things like setting up the new
personality, because we want the new personality to affect the starting
of the new environment, but at the same time we do _not_ want the new
personality to take effect if flushing the old one fails.

As a result, the x86-64 '32-bit' personality is actually done using this
insane "I'm going to change the ABI, but I haven't done it yet" bit
(TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the
personality, but just the "pending" bit, so that "flush_thread()" can do
the actual personality magic.

This patch in no way changes any of that insanity, but it does split the
'flush_old_exec()' function up into a preparatory part that can fail
(still called flush_old_exec()), and a new part that will actually set
up the new exec environment (setup_new_exec()).  All callers are changed
to trivially comply with the new world order.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoInput: update multi-touch protocol documentation
Henrik Rydberg [Fri, 29 Jan 2010 06:28:28 +0000]
Input: update multi-touch protocol documentation

This patch documents a new ABS_MT parameter and adds further text to
clarify some points around the MT protocol.

Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com>
Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com>
Requested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoInput: add the ABS_MT_PRESSURE event
Henrik Rydberg [Fri, 29 Jan 2010 06:28:27 +0000]
Input: add the ABS_MT_PRESSURE event

For pressure-based multi-touch devices, a direct way to send sensor
intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE
event to the MT protocol.

Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com>
Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com>
Requested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoInput: winbond-cir - remove dmesg spam
David Härdeman [Fri, 29 Jan 2010 06:28:27 +0000]
Input: winbond-cir - remove dmesg spam

I missed converting one dev_info call to deb_dbg before submitting the driver.
Without this change, a message will be printed to dmesg for each button press
if a RC6 remote is used.

Signed-off-by: David Härdeman <david@hardeman.nu>
Cc: stable <stable@kernel.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Fri, 29 Jan 2010 02:48:53 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Fix failure exit in ipathfs
  fix oops in fs/9p late mount failure
  fix leak in romfs_fill_super()
  get rid of pointless checks after simple_pin_fs()
  Fix failure exits in bfs_fill_super()
  fix affs parse_options()
  Fix remount races with symlink handling in affs
  Fix a leak in affs_fill_super()

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Fri, 29 Jan 2010 00:33:12 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/PCI: remove IOH range fetching
  PCI: fix nested spinlock hang in aer_inject

9 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 28 Jan 2010 22:34:11 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Update mach-types
  [ARM] orion5x: D-link DNS-323 rev. B1 power-off
  [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2
  [ARM] pxa: fix irq suspend/resume for pxa25x
  [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x
  [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus
  [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot
  [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two

9 years ago[ARM] Update mach-types
Russell King [Thu, 28 Jan 2010 22:15:55 +0000]
[ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoMerge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
Russell King [Thu, 28 Jan 2010 21:59:58 +0000]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6

9 years agoBtrfs: check total number of devices when removing missing
Josef Bacik [Wed, 27 Jan 2010 02:09:38 +0000]
Btrfs: check total number of devices when removing missing

If you have a disk failure in RAID1 and then add a new disk to the
array, and then try to remove the missing volume, it will fail.  The
reason is the sanity check only looks at the total number of rw devices,
which is just 2 because we have 2 good disks and 1 bad one.  Instead
check the total number of devices in the array to make sure we can
actually remove the device.  Tested this with a failed disk setup and
with this test we can now run

btrfs-vol -r missing /mount/point

and it works fine.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoBtrfs: check return value of open_bdev_exclusive properly
Josef Bacik [Wed, 27 Jan 2010 02:09:00 +0000]
Btrfs: check return value of open_bdev_exclusive properly

Hit this problem while testing RAID1 failure stuff.  open_bdev_exclusive
returns ERR_PTR(), not NULL.  So change the return value properly.  This
is important if you accidently specify a device that doesn't exist when
trying to add a new device to an array, you will panic the box
dereferencing bdev.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoBtrfs: do not mark the chunk as readonly if in degraded mode
Josef Bacik [Wed, 27 Jan 2010 02:07:59 +0000]
Btrfs: do not mark the chunk as readonly if in degraded mode

If a RAID setup has chunks that span multiple disks, and one of those
disks has failed, btrfs_chunk_readonly will return 1 since one of the
disks in that chunk's stripes is dead and therefore not writeable.  So
instead if we are in degraded mode, return 0 so we can go ahead and
allocate stuff.  Without this patch all of the block groups in a RAID1
setup will end up read-only, which will mean we can't add new disks to
the array since we won't be able to make allocations.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoBtrfs: run orphan cleanup on default fs root
Josef Bacik [Tue, 26 Jan 2010 14:30:53 +0000]
Btrfs: run orphan cleanup on default fs root

This patch revert's commit

6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5

Since it introduces this problem where we can run orphan cleanup on a
volume that can have orphan entries re-added.  Instead of my original
fix, Yan Zheng pointed out that we can just revert my original fix and
then run the orphan cleanup in open_ctree after we look up the fs_root.
I have tested this with all the tests that gave me problems and this
patch fixes both problems.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoBtrfs: fix a memory leak in btrfs_init_acl
Yang Hongyang [Tue, 26 Jan 2010 00:48:23 +0000]
Btrfs: fix a memory leak in btrfs_init_acl

In btrfs_init_acl() cloned acl is not released

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoBtrfs: Use correct values when updating inode i_size on fallocate
Aneesh Kumar K.V [Wed, 20 Jan 2010 07:28:54 +0000]
Btrfs: Use correct values when updating inode i_size on fallocate

commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825
Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Date:   Wed Jan 20 12:57:53 2010 +0530

    Btrfs: Use correct values when updating inode i_size on fallocate

    Even though we allocate more, we should be updating inode i_size
    as per the arguments passed

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoBtrfs: remove tree_search() in extent_map.c
Miao Xie [Tue, 15 Dec 2009 06:54:17 +0000]
Btrfs: remove tree_search() in extent_map.c

This patch removes tree_search() in extent_map.c because it is not called by
anything.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoBtrfs: Add mount -o compress-force
Chris Mason [Thu, 28 Jan 2010 21:18:15 +0000]
Btrfs: Add mount -o compress-force

The default btrfs mount -o compress mode will quickly back off
compressing a file if it notices that compression does not reduce the
size of the data being written.  This can save considerable CPU because
all future writes to the file go through uncompressed.

But some files are both very large and have mixed data stored in
them.  In that case, we want to add the ability to always try
compressing data before writing it.

This commit adds mount -o compress-force.  A later commit will add
a new inode flag that does the same thing.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

9 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Thu, 28 Jan 2010 20:59:43 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs
  MIPS: PowerTV: Streamline access to platform device registers
  MIPS: Fix vmlinuz build for 32bit-only math shells
  MIPS: Add support of LZO-compressed kernels

9 years agoMerge branch 'for-linus' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Thu, 28 Jan 2010 20:57:50 +0000]
Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBI: fix volume creation input checking

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Thu, 28 Jan 2010 20:56:23 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: fix crashes with TSB43AB23 on 64bit systems
  firewire: core: fix use-after-free regression in FCP handler
  firewire: cdev: add_descriptor documentation fix
  firewire: core: add_descriptor size check

9 years agox86/PCI: remove IOH range fetching
Jeff Garrett [Thu, 28 Jan 2010 04:02:26 +0000]
x86/PCI: remove IOH range fetching

Turned out to cause trouble on single IOH machines, and is superceded by
_CRS on multi-IOH machines with production BIOSes.

Signed-off-by: Jeff Garrett <jeff@jgarrett.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

9 years agoInput: lifebook - add another Lifebook DMI signature
Jon Dodgson [Thu, 28 Jan 2010 08:07:45 +0000]
Input: lifebook - add another Lifebook DMI signature

There are many many ways one can capitalize "Lifebook B Series"...

Signed-off-by: Jon Dodgson <crayzeejon@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoMIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs
David VomLehn [Tue, 22 Dec 2009 01:49:22 +0000]
MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs

The MIPS processor is limited to 64 external interrupt sources. Using a
greater number without IRQ sharing requires reading platform-specific
registers. On such platforms, reading the IntCtl register to determine
which interrupt corresponds to a timer interrupt will not work.

On MIPSR2 systems there is a solution - the TI bit in the Cause register,
specifically indicates that a timer interrupt has occured. This patch uses
that bit to detect interrupts for MIPSR2 processors, which may be expected
to work regardless of how the timer interrupt may be routed in the hardware.

Signed-off-by: David VomLehn (dvomlehn@cisco.com)
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/804/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>