8 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 8 Jun 2011 02:07:22 +0000]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers: Consider slack value in mod_timer()
  clockevents: Handle empty cpumask gracefully

8 years agoMerge branch 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Wed, 8 Jun 2011 02:06:28 +0000]
Merge branch 'kvm-updates/3.0' of git://git./virt/kvm/kvm

* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Initialize kvm before registering the mmu notifier
  KVM: x86: use proper port value when checking io instruction permission
  KVM: add missing void __user * cast to access_ok() call

8 years agoMAINTAINERS: Saying goodbye to David Brownell
Grant Likely [Mon, 6 Jun 2011 06:40:48 +0000]
MAINTAINERS: Saying goodbye to David Brownell

We had to say goodbye when David passed away recently.  David had a
huge impact on our community, both personally in the lives of the
people he worked with, and technically in the design and maintenance
of several subsystems.  He is greatly missed.

He also leaves behind a number of much loved subsystems now orphaned.
This patch updates the MAINTAINERS file for the areas that David was
responsible for and adds an entry for him to the CREDITS file.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6
Linus Torvalds [Wed, 8 Jun 2011 02:04:21 +0000]
Merge git://git./linux/kernel/git/hirofumi/fatfs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Fix corrupt inode flags when remove ATTR_SYS flag

8 years agoMN10300: Add missing _sdata declaration
David Howells [Mon, 6 Jun 2011 14:47:23 +0000]
MN10300: Add missing _sdata declaration

_sdata needs to be declared in the linker script now as of commit
a2d063ac216c ("extable, core_kernel_data(): Make sure all archs define
_sdata")

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMN10300: die_if_no_fixup() shouldn't use get_user() as it doesn't call set_fs()
David Howells [Mon, 6 Jun 2011 14:47:14 +0000]
MN10300: die_if_no_fixup() shouldn't use get_user() as it doesn't call set_fs()

die_if_no_fixup() shouldn't use get_user() as it doesn't call set_fs() to
indicate that it wants to probe a kernel address.  Instead it should use
probe_kernel_read().

This fixes the problem of gdb seeing SIGILL rather than SIGTRAP when hitting
the KGDB special breakpoint upon SysRq+g being seen.  The problem was that
die_if_no_fixup() was failing to read the opcode of the instruction that caused
the exception, and thus not fixing up the exception.

This caused gdb to get a S04 response to the $? request in its remote protocol
rather than S05 - which would then cause it to continue with $C04 rather than
$c in an attempt to pass the signal onto the inferior process.  The kernel,
however, does not support $Cnn, and so objects by returning an E22 response,
indicating an error.  gdb does not expect this and prints:

warning: Remote failure reply: E22

and then returns to the gdb command prompt unable to continue.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMN10300: Fix one of the kernel debugger cacheflush variants
David Howells [Mon, 6 Jun 2011 14:47:05 +0000]
MN10300: Fix one of the kernel debugger cacheflush variants

One of the kernel debugger cacheflush variants escaped proper testing.  Two of
the labels are wrong, being derived from the code that was copied to construct
the variant.

The first label results in the following assembler message:

    AS      arch/mn10300/mm/cache-dbg-flush-by-reg.o
  arch/mn10300/mm/cache-dbg-flush-by-reg.S: Assembler messages:
  arch/mn10300/mm/cache-dbg-flush-by-reg.S:123: Error: symbol `debugger_local_cache_flushinv_no_dcache' is already defined

And the second label results in the following linker message:

  arch/mn10300/mm/built-in.o:(.text+0x1d39): undefined reference to `mn10300_local_icache_inv_range_reg_end'
  arch/mn10300/mm/built-in.o:(.text+0x1d39): relocation truncated to fit: R_MN10300_PCREL16 against undefined symbol `mn10300_local_icache_inv_range_reg_end'

To test this file the following configuration pieces must be set:

CONFIG_AM34=y
CONFIG_MN10300_CACHE_WBACK=y
CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_REG=y
CONFIG_MN10300_CACHE_MANAGE_BY_REG=y
CONFIG_AM34_HAS_CACHE_SNOOP=n

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Wed, 8 Jun 2011 01:47:53 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fix kvm defines for 31 bit compile
  [S390] use generic RCU page-table freeing code
  [S390] qdio: Split SBAL entry flags
  [S390] kvm-s390: fix stfle facilities numbers >=64
  [S390] kvm-s390: Fix host crash on misbehaving guests

8 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux...
Linus Torvalds [Wed, 8 Jun 2011 01:46:37 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (21 commits)
  ARM: OMAP4: MMC: increase delay for pbias
  arm: omap2plus: move NAND_BLOCK_SIZE out of boards
  omap4: hwmod: Enable the keypad
  omap3: Free Beagle rev gpios when they are read, so others can read them later
  arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
  omap: rx51: Don't power up speaker amplifier at bootup
  omap: rx51: Set regulator V28_A always on
  ARM: OMAP4: MMC: no regulator off during probe for eMMC
  arm: omap2plus: fix ads7846 pendown gpio request
  ARM: OMAP2: Add missing iounmap in omap4430_phy_init
  ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
  ARM: omap2+: mux: Allow board mux settings to be NULL
  OMAP4: fix return value of omap4_l3_init
  OMAP: iovmm: fix SW flags passed by user
  arch/arm/mach-omap1/dma.c: Invert calls to platform_device_put and platform_device_del
  OMAP2+: mux: fix compilation warnings
  OMAP: SRAM: Fix warning: format '%08lx' expects type 'long unsigned int'
  arm: omap3: cm-t3517: fix section mismatch warning
  OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o
  ARM: OMAP2: Add missing include of linux/gpio.h
  ...

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
Linus Torvalds [Wed, 8 Jun 2011 01:44:10 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Processes waiting on inode glock that no processes are holding

8 years agoMerge branch 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 8 Jun 2011 01:41:26 +0000]
Merge branch 'fbdev-fixes-for-linus' of git://git./linux/kernel/git/lethal/fbdev-3.x

* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x:
  video: Fix use-after-free by vga16fb on rmmod
  video: Convert vmalloc/memset to vzalloc
  efifb: Disallow manual bind and unbind
  efifb: Fix mismatched request/release_mem_region
  efifb: Enable write-combining
  drivers/video/pxa168fb.c: add missing clk_put
  drivers/video/imxfb.c: add missing clk_put
  fbdev: bf537-lq035: add missing blacklight properties type
  savagefb: Use panel CVT mode as default
  fbdev: sh_mobile_lcdcfb: Fix up fallout from MERAM changes.

8 years agoMerge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro...
Linus Torvalds [Wed, 8 Jun 2011 01:36:59 +0000]
Merge branch 'for-linus-2' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  vfs: make unlink() and rmdir() return ENOENT in preference to EROFS
  lmLogOpen() broken failure exit
  usb: remove bad dput after dentry_unhash
  more conservative S_NOSEC handling

8 years agovfs: make unlink() and rmdir() return ENOENT in preference to EROFS
Theodore Ts'o [Mon, 6 Jun 2011 23:19:40 +0000]
vfs: make unlink() and rmdir() return ENOENT in preference to EROFS

If user space attempts to remove a non-existent file or directory, and
the file system is mounted read-only, return ENOENT instead of EROFS.
Either error code is arguably valid/correct, but ENOENT is a more
specific error message.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agolmLogOpen() broken failure exit
Al Viro [Sun, 5 Jun 2011 18:22:56 +0000]
lmLogOpen() broken failure exit

Callers of lmLogOpen() expect it to return -E... on failure exits, which
is what it returns, except for the case of blkdev_get_by_dev() failure.
It that case lmLogOpen() return the error with the wrong sign...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>

8 years ago[S390] fix kvm defines for 31 bit compile
Martin Schwidefsky [Mon, 6 Jun 2011 12:14:42 +0000]
[S390] fix kvm defines for 31 bit compile

KVM is not available for 31 bit but the KVM defines cause warnings:

arch/s390/include/asm/pgtable.h: In function 'ptep_test_and_clear_user_dirty':
arch/s390/include/asm/pgtable.h:817: warning: integer constant is too large for 'unsigned long' type
arch/s390/include/asm/pgtable.h:818: warning: integer constant is too large for 'unsigned long' type
arch/s390/include/asm/pgtable.h: In function 'ptep_test_and_clear_user_young':
arch/s390/include/asm/pgtable.h:837: warning: integer constant is too large for 'unsigned long' type
arch/s390/include/asm/pgtable.h:838: warning: integer constant is too large for 'unsigned long' type

Add 31 bit versions of the KVM defines to remove the warnings.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

8 years ago[S390] use generic RCU page-table freeing code
Martin Schwidefsky [Mon, 6 Jun 2011 12:14:41 +0000]
[S390] use generic RCU page-table freeing code

Replace the s390 specific rcu page-table freeing code with the
generic variant. This requires to duplicate the definition for the
struct mmu_table_batch as s390 does not use the generic tlb flush
code.

While we are at it remove the restriction that page table fragments
can not be reused after a single fragment has been freed with rcu
and split out allocation and freeing of page tables with pgstes.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

8 years ago[S390] qdio: Split SBAL entry flags
Jan Glauber [Mon, 6 Jun 2011 12:14:40 +0000]
[S390] qdio: Split SBAL entry flags

The qdio SBAL entry flag is made-up of four different values that are
independent of one another. Some of the bits are reserved by the
hardware and should not be changed by qdio. Currently all four values
are overwritten since the SBAL entry flag is defined as an u32.

Split the SBAL entry flag into four u8's as defined by the hardware
and don't touch the reserved bits.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

8 years ago[S390] kvm-s390: fix stfle facilities numbers >=64
Christian Borntraeger [Mon, 6 Jun 2011 12:14:39 +0000]
[S390] kvm-s390: fix stfle facilities numbers >=64

Currently KVM masks out the known good facilities only for the first
double word, but passed the 2nd double word without filtering. This
breaks some code on newer systems:

[    0.593966] ------------[ cut here ]------------
[    0.594086] WARNING: at arch/s390/oprofile/hwsampler.c:696
[    0.594213] Modules linked in:
[    0.594321] Modules linked in:
[    0.594439] CPU: 0 Not tainted 3.0.0-rc1 #46
[    0.594564] Process swapper (pid: 1, task: 00000001effa8038, ksp: 00000001effafab8)
[    0.594735] Krnl PSW : 0704100180000000 00000000004ab89a (hwsampler_setup+0x75a/0x7b8)
[    0.594910]            R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3
[    0.595120] Krnl GPRS: ffffffff00000000 00000000ffffffea ffffffffffffffea 00000000004a98f8
[    0.595351]            00000000004aa002 0000000000000001 000000000080e720 000000000088b9f8
[    0.595522]            000000000080d3e8 0000000000000000 0000000000000000 000000000080e464
[    0.595725]            0000000000000000 00000000005db198 00000000004ab3a2 00000001effafd98
[    0.595901] Krnl Code: 00000000004ab88c: c0e5000673ca        brasl   %r14,57a020
[    0.596071]            00000000004ab892: a7f4fc77            brc     15,4ab180
[    0.596276]            00000000004ab896: a7f40001            brc     15,4ab898
[    0.596454]           >00000000004ab89a: a7c8ffa1            lhi     %r12,-95
[    0.596657]            00000000004ab89e: a7f4fc71            brc     15,4ab180
[    0.596854]            00000000004ab8a2: a7f40001            brc     15,4ab8a4
[    0.597029]            00000000004ab8a6: a7f4ff22            brc     15,4ab6ea
[    0.597230]            00000000004ab8aa: c0200011009a        larl    %r2,6cb9de
[    0.597441] Call Trace:
[    0.597511] ([<00000000004ab3a2>] hwsampler_setup+0x262/0x7b8)
[    0.597676]  [<0000000000875812>] oprofile_arch_init+0x32/0xd0
[    0.597834]  [<0000000000875788>] oprofile_init+0x28/0x74
[    0.597991]  [<00000000001001be>] do_one_initcall+0x3a/0x170
[    0.598151]  [<000000000084fa22>] kernel_init+0x142/0x1ec
[    0.598314]  [<000000000057db16>] kernel_thread_starter+0x6/0xc
[    0.598468]  [<000000000057db10>] kernel_thread_starter+0x0/0xc
[    0.598606] Last Breaking-Event-Address:
[    0.598707]  [<00000000004ab896>] hwsampler_setup+0x756/0x7b8
[    0.598863] ---[ end trace ce3179037f4e3e5b ]---

So lets also mask the 2nd double word. Facilites 66,76,76,77 should be fine.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

8 years ago[S390] kvm-s390: Fix host crash on misbehaving guests
Christian Borntraeger [Mon, 6 Jun 2011 12:14:38 +0000]
[S390] kvm-s390: Fix host crash on misbehaving guests

commit 9ff4cfb3fcfd48b49fdd9be7381b3be340853aa4 ([S390] kvm-390: Let
kernel exit SIE instruction on work) fixed a problem of commit
commit cd3b70f5d4d82f85d1e1d6e822f38ae098cf7c72 ([S390] virtualization
aware cpu measurement) but uncovered another one.

If a kvm guest accesses guest real memory that doesnt exist, the
page fault handler calls the sie hook, which then rewrites
the return psw from sie_inst to either sie_exit or sie_reenter.
On return, the page fault handler will then detect the wrong access
as a kernel fault causing a kernel oops in sie_reenter or sie_exit.

We have to add these two addresses to the exception  table to allow
graceful exits.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

8 years agovideo: Fix use-after-free by vga16fb on rmmod
Bruno Prémont [Tue, 24 May 2011 19:59:17 +0000]
video: Fix use-after-free by vga16fb on rmmod

Since fb_info is now refcounted and thus may get freed at any time it
gets unregistered module unloading will try to unregister framebuffer
as stored in platform data on probe though this pointer may
be stale.

Cleanup platform data on framebuffer release.

CC: stable@kernel.org
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agoLinux 3.0-rc2
Linus Torvalds [Mon, 6 Jun 2011 09:06:33 +0000]
Linux 3.0-rc2

8 years agomm: fix ENOSPC returned by handle_mm_fault()
Hugh Dickins [Mon, 6 Jun 2011 05:03:13 +0000]
mm: fix ENOSPC returned by handle_mm_fault()

Al Viro observes that in the hugetlb case, handle_mm_fault() may return
a value of the kind ENOSPC when its caller is expecting a value of the
kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 6 Jun 2011 08:51:28 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: usb - turn off de-emphasis in s/pdif for cm6206
  ALSA: asihpi: Use angle brackets for system includes
  ALSA: fm801: add error handling if auto-detect fails
  ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write
  ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd()
  ALSA: 6fire: Don't leak firmware in error path
  ASoC: Fix wm_hubs input PGA ZC bits
  ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared

8 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Mon, 6 Jun 2011 08:48:02 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (max6642): Better chip detection schema
  hwmon: (coretemp) Further relax temperature range checks
  hwmon: (coretemp) Fix TjMax detection for older CPUs
  hwmon: (coretemp) Relax target temperature range check
  hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault

8 years agoKVM: Initialize kvm before registering the mmu notifier
Mike Waychison [Fri, 3 Jun 2011 20:04:53 +0000]
KVM: Initialize kvm before registering the mmu notifier

It doesn't make sense to ever see a half-initialized kvm structure on
mmu notifier callbacks.  Previously, 85722cda changed the ordering to
ensure that the mmu_lock was initialized before mmu notifier
registration, but there is still a race where the mmu notifier could
come in and try accessing other portions of struct kvm before they are
intialized.

Solve this by moving the mmu notifier registration to occur after the
structure is completely initialized.

Google-Bug-Id: 452199
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

8 years agoKVM: x86: use proper port value when checking io instruction permission
Marcelo Tosatti [Mon, 30 May 2011 18:23:14 +0000]
KVM: x86: use proper port value when checking io instruction permission

Commit f6511935f42 moved the permission check for io instructions
to the ->check_perm callback. It failed to copy the port value from RDX
register for string and "in,out ax,dx" instructions.

Fix it by reading RDX register at decode stage when appropriate.

Fixes FC8.32 installation.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

8 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Mon, 6 Jun 2011 07:28:49 +0000]
Merge branch 'fix/asoc' into for-linus

8 years agoMerge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra
Linus Torvalds [Sat, 4 Jun 2011 23:11:11 +0000]
Merge branch 'for-linus' of git://android.git./kernel/tegra

* 'for-linus' of git://android.git.kernel.org/kernel/tegra:
  ARM: Tegra: Harmony: Fix conflicting GPIO numbering

8 years agoARM: Tegra: Harmony: Fix conflicting GPIO numbering
Stephen Warren [Tue, 31 May 2011 21:14:07 +0000]
ARM: Tegra: Harmony: Fix conflicting GPIO numbering

Currently, both the WM8903 and TPS6586x chips attempt to register with
gpiolib using the same GPIO numbers. This causes the audio driver to
fail to initialize.

To solve this, add a define to board-harmony.h for the TPS6586x, and make
board-harmony-power.c use this define, instead of directly referencing
TEGRA_NR_GPIOS.

This fixes a regression introduced by commit
6f168f2fa60f87e85e0df25e87e2372f22f5eb7c.
ARM: tegra: harmony: initialize the TPS65862 PMIC

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Colin Cross <ccross@android.com>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Linus Torvalds [Sat, 4 Jun 2011 21:17:23 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/btrfs-unstable

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits)
  btrfs: fix uninitialized variable warning
  btrfs: add helper for fs_info->closing
  Btrfs: add mount -o inode_cache
  btrfs: scrub: add explicit plugging
  btrfs: use btrfs_ino to access inode number
  Btrfs: don't save the inode cache if we are deleting this root
  btrfs: false BUG_ON when degraded
  Btrfs: don't save the inode cache in non-FS roots
  Btrfs: make sure we don't overflow the free space cache crc page
  Btrfs: fix uninit variable in the delayed inode code
  btrfs: scrub: don't reuse bios and pages
  Btrfs: leave spinning on lookup and map the leaf
  Btrfs: check for duplicate entries in the free space cache
  Btrfs: don't try to allocate from a block group that doesn't have enough space
  Btrfs: don't always do readahead
  Btrfs: try not to sleep as much when doing slow caching
  Btrfs: kill BTRFS_I(inode)->block_group
  Btrfs: don't look at the extent buffer level 3 times in a row
  Btrfs: map the node block when looking for readahead targets
  Btrfs: set range_start to the right start in count_range_bits
  ...

8 years agohwmon: (max6642): Better chip detection schema
Per Dalén [Thu, 26 May 2011 13:08:53 +0000]
hwmon: (max6642): Better chip detection schema

Improve detection of MAX6642 by reading non existing registers (0x04, 0x06
and 0xff). Reading those registers returns the previously read value.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
[guenter.roeck@ericsson.com: added second set of register reads]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Sat, 4 Jun 2011 14:19:51 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Fix oops caused by queue refcounting failure

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 4 Jun 2011 14:16:00 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  tg3: Fix tg3_skb_error_unmap()
  net: tracepoint of net_dev_xmit sees freed skb and causes panic
  drivers/net/can/flexcan.c: add missing clk_put
  net: dm9000: Get the chip in a known good state before enabling interrupts
  drivers/net/davinci_emac.c: add missing clk_put
  af-packet: Add flag to distinguish VID 0 from no-vlan.
  caif: Fix race when conditionally taking rtnl lock
  usbnet/cdc_ncm: add missing .reset_resume hook
  vlan: fix typo in vlan_dev_hard_start_xmit()
  net/ipv4: Check for mistakenly passed in non-IPv4 address
  iwl4965: correctly validate temperature value
  bluetooth l2cap: fix locking in l2cap_global_chan_by_psm
  ath9k: fix two more bugs in tx power
  cfg80211: don't drop p2p probe responses
  Revert "net: fix section mismatches"
  drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run()
  sctp: stop pending timers and purge queues when peer restart asoc
  drivers/net: ks8842 Fix crash on received packet when in PIO mode.
  ip_options_compile: properly handle unaligned pointer
  iwlagn: fix incorrect PCI subsystem id for 6150 devices
  ...

8 years agobtrfs: fix uninitialized variable warning
David Sterba [Fri, 3 Jun 2011 14:29:08 +0000]
btrfs: fix uninitialized variable warning

With Linus' tree, today's linux-next build (powercp ppc64_defconfig)
produced this warning:

fs/btrfs/delayed-inode.c: In function 'btrfs_delayed_update_inode':
fs/btrfs/delayed-inode.c:1598:6: warning: 'ret' may be used
uninitialized in this function

Introduced by commit 16cdcec736cd ("btrfs: implement delayed inode items
operation").

This fixes a bug in btrfs_update_inode(): if the returned value from
btrfs_delayed_update_inode is a nonzero garbage, inode stat data are not
updated and several call paths may hit a BUG_ON or fail with strange
code.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Sterba <dsterba@suse.cz>

8 years agobtrfs: add helper for fs_info->closing
David Sterba [Tue, 31 May 2011 16:07:27 +0000]
btrfs: add helper for fs_info->closing

wrap checking of filesystem 'closing' flag and fix a few missing memory
barriers.

Signed-off-by: David Sterba <dsterba@suse.cz>

8 years agoBtrfs: add mount -o inode_cache
Chris Mason [Fri, 3 Jun 2011 13:36:29 +0000]
Btrfs: add mount -o inode_cache

This makes the inode map cache default to off until we
fix the overflow problem when the free space crcs don't fit
inside a single page.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agobtrfs: scrub: add explicit plugging
Arne Jansen [Sat, 28 May 2011 20:58:38 +0000]
btrfs: scrub: add explicit plugging

With the removal of the implicit plugging scrub ends up doing more and
smaller I/O than necessary. This patch adds explicit plugging per chunk.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agobtrfs: use btrfs_ino to access inode number
David Sterba [Tue, 31 May 2011 17:08:14 +0000]
btrfs: use btrfs_ino to access inode number

commit 4cb5300bc ("Btrfs: add mount -o auto_defrag") accesses inode
number directly while it should use the helper with the new inode
number allocator.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: don't save the inode cache if we are deleting this root
Josef Bacik [Tue, 31 May 2011 19:33:33 +0000]
Btrfs: don't save the inode cache if we are deleting this root

With xfstest 254 I can panic the box every time with the inode number caching
stuff on.  This is because we clean the inodes out when we delete the subvolume,
but then we write out the inode cache which adds an inode to the subvolume inode
tree, and then when it gets evicted again the root gets added back on the dead
roots list and is deleted again, so we have a double free.  To stop this from
happening just return 0 if refs is 0 (and we're not the tree root since tree
root always has refs of 0).  With this fix 254 no longer panics.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agobtrfs: false BUG_ON when degraded
Arne Jansen [Mon, 30 May 2011 08:36:16 +0000]
btrfs: false BUG_ON when degraded

In degraded mode the struct btrfs_device of missing devs don't have
device->name set. A kstrdup of NULL correctly returns NULL. Don't
BUG in this case.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: don't save the inode cache in non-FS roots
liubo [Wed, 1 Jun 2011 09:42:49 +0000]
Btrfs: don't save the inode cache in non-FS roots

This adds extra checks to make sure the inode map we are caching really
belongs to a FS root instead of a special relocation tree.  It
prevents crashes during balancing operations.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: make sure we don't overflow the free space cache crc page
Chris Mason [Fri, 3 Jun 2011 05:26:53 +0000]
Btrfs: make sure we don't overflow the free space cache crc page

The free space cache uses only one page for crcs right now,
which means we can't have a cache file bigger than the
crcs we can fit in the first page.  This adds a check to
enforce that restriction.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: fix uninit variable in the delayed inode code
Chris Mason [Fri, 3 Jun 2011 05:13:45 +0000]
Btrfs: fix uninit variable in the delayed inode code

The nitems counter needs to start at zero

Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agobtrfs: scrub: don't reuse bios and pages
Arne Jansen [Sat, 28 May 2011 19:57:55 +0000]
btrfs: scrub: don't reuse bios and pages

The current scrub implementation reuses bios and pages as often as possible,
allocating them only on start and releasing them when finished. This leads
to more problems with the block layer than it's worth. The elevator gets
confused when there are more pages added to the bio than bi_size suggests.
This patch completely rips out the reuse of bios and pages and allocates
them freshly for each submit.

Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Maosn <chris.mason@oracle.com>

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 3 Jun 2011 23:11:26 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Use hlist_entry() for io_context.cic_list.first
  cfq-iosched: Remove bogus check in queue_fail path
  xen/blkback: potential null dereference in error handling
  xen/blkback: don't call vbd_size() if bd_disk is NULL
  block: blkdev_get() should access ->bd_disk only after success
  CFQ: Fix typo and remove unnecessary semicolon
  block: remove unwanted semicolons
  Revert "block: Remove extra discard_alignment from hd_struct."
  nbd: adjust 'max_part' according to part_shift
  nbd: limit module parameters to a sane value
  nbd: pass MSG_* flags to kernel_recvmsg()
  block: improve the bio_add_page() and bio_add_pc_page() descriptions

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
Linus Torvalds [Fri, 3 Jun 2011 23:04:10 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: strncpy: fix handling of zero lengths

8 years agoMerge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux...
Linus Torvalds [Fri, 3 Jun 2011 23:03:16 +0000]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  asm-generic/unistd.h: support sendmmsg syscall
  tile: enable CONFIG_BUGVERBOSE

8 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Fri, 3 Jun 2011 22:59:32 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix-up free space earlier
  UBIFS: intialize LPT earlier
  UBIFS: assert no fixup when writing a node
  UBIFS: fix clean znode counter corruption in error cases
  UBIFS: fix memory leak on error path
  UBIFS: fix shrinker object count reports
  UBIFS: fix recovery broken by the previous recovery fix
  UBIFS: amend ubifs_recover_leb interface
  UBIFS: introduce a "grouped" journal head flag
  UBIFS: supress false error messages

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Fri, 3 Jun 2011 22:58:48 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/rostedt/linux-2.6-ktest

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest:
  ktest: Ignore unset values of the minconfig in config_bisect
  ktest: Fix result of rebooting the kernel
  ktest: Fix off-by-one in config bisect result

8 years agoMerge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 3 Jun 2011 22:53:23 +0000]
Merge branch 'rmobile-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: add DMAC clock definitions on SH7372
  ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO
  sh_mobile_meram: MERAM platform data for LCDC

8 years agousb: remove bad dput after dentry_unhash
Sage Weil [Tue, 31 May 2011 16:11:11 +0000]
usb: remove bad dput after dentry_unhash

Commit 64252c75a removed the useless dget from dentry_unhash but didn't
fix up this caller in the usb code.  There used to be exactly one dput per
dentry_unhash call; now there are none.

Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agomore conservative S_NOSEC handling
Al Viro [Fri, 3 Jun 2011 22:24:58 +0000]
more conservative S_NOSEC handling

Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.

AFAICS, the only reasonably sane way to deal with that is
* new superblock flag; unless set, S_NOSEC is not going to be set.
* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.

It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoMerge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 3 Jun 2011 22:04:25 +0000]
Merge branch 'sh-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  dmaengine: shdma: fix a regression: initialise DMA channels for memcpy
  dmaengine: shdma: Fix up fallout from runtime PM changes.
  Revert "clocksource: sh_cmt: Runtime PM support"
  Revert "clocksource: sh_tmu: Runtime PM support"
  sh: Fix up asm-generic/ptrace.h fallout.
  sh64: Move from P1SEG to CAC_ADDR for consistent sync.
  sh64: asm/pgtable.h needs asm/mmu.h
  sh: asm/tlb.h needs linux/swap.h
  sh: mark DMA slave ID 0 as invalid
  sh: Update shmin to reflect PIO dependency.
  sh: arch/sh/kernel/process_32.c needs linux/prefetch.h.
  sh: add MMCIF runtime PM support on ecovec
  sh: switch ap325rxa to dynamically manage the platform camera

8 years agoRevert "ASoC: Update cx20442 for TTY API change"
Linus Torvalds [Fri, 3 Jun 2011 22:00:50 +0000]
Revert "ASoC: Update cx20442 for TTY API change"

This reverts commit ed0bd2333cffc3d856db9beb829543c1dfc00982.

Since we reverted the TTY API change, we should revert the ASoC update
to it too.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoRevert "tty: make receive_buf() return the amout of bytes received"
Linus Torvalds [Fri, 3 Jun 2011 21:33:24 +0000]
Revert "tty: make receive_buf() return the amout of bytes received"

This reverts commit b1c43f82c5aa265442f82dba31ce985ebb7aa71c.

It was broken in so many ways, and results in random odd pty issues.

It re-introduced the buggy schedule_work() in flush_to_ldisc() that can
cause endless work-loops (see commit a5660b41af6a: "tty: fix endless
work loop when the buffer fills up").

It also used an "unsigned int" return value fo the ->receive_buf()
function, but then made multiple functions return a negative error code,
and didn't actually check for the error in the caller.

And it didn't actually work at all.  BenH bisected down odd tty behavior
to it:
  "It looks like the patch is causing some major malfunctions of the X
   server for me, possibly related to PTYs.  For example, cat'ing a
   large file in a gnome terminal hangs the kernel for -minutes- in a
   loop of what looks like flush_to_ldisc/workqueue code, (some ftrace
   data in the quoted bits further down).

   ...

   Some more data: It -looks- like what happens is that the
   flush_to_ldisc work queue entry constantly re-queues itself (because
   the PTY is full ?) and the workqueue thread will basically loop
   forver calling it without ever scheduling, thus starving the consumer
   process that could have emptied the PTY."

which is pretty much exactly the problem we fixed in a5660b41af6a.

Milton Miller pointed out the 'unsigned int' issue.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Milton Miller <miltonm@bga.com>
Cc: Stefan Bigler <stefan.bigler@keymile.com>
Cc: Toby Gray <toby.gray@realvnc.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Fri, 3 Jun 2011 18:31:50 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6 into for-davem

8 years agoALSA: usb - turn off de-emphasis in s/pdif for cm6206
Eric Lammerts [Fri, 27 May 2011 22:16:52 +0000]
ALSA: usb - turn off de-emphasis in s/pdif for cm6206

CM6206: Turn off de-emphasis channel status bit in S/PDIF output.

Signed-off-by: Eric Lammerts <eric@lammerts.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoUBIFS: fix-up free space earlier
Ben Gardiner [Mon, 30 May 2011 18:56:16 +0000]
UBIFS: fix-up free space earlier

The free space fixup is currently initiated during mount after the call to
ubifs_write_master() which results in a write to PEBs; this has been observed
with the patch 'assert no fixup when writing a node' applied:

Move the free space fixup on mount to before the calls to
ubifs_recover_inl_heads() and ubifs_write_master(). This results in no
assertions with the previously mentioned patch applied.

Artem: tweaked the patch a bit

Signed-off-by: Ben Gardiner <bengardiner@nanometrics>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

8 years agoUBIFS: intialize LPT earlier
Ben Gardiner [Mon, 30 May 2011 18:56:15 +0000]
UBIFS: intialize LPT earlier

The current 'mount_ubifs()' implementation does not initialize the LPT until the
the master node is marked dirty. Move the LPT initialization to before marking
the master node dirty. This is a preparation for the next patch which will move
the free-space-fixup check to before marking the master node dirty, because we
have to fix-up the free space before doing any writes.

Artem: massaged the patch and commit message.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

8 years agoUBIFS: assert no fixup when writing a node
Ben Gardiner [Mon, 30 May 2011 18:56:14 +0000]
UBIFS: assert no fixup when writing a node

The current free space fixup can result in some writing to the UBI volume
when the space_fixup flag is set.

To catch instances where UBIFS is writing to the NAND while the space_fixup
flag is set, add an assert to ubifs_write_node().

Artem: tweaked the patch, added similar assertion to the write buffer
       write path.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Reviewed-by: Matthew L. Creech <mlcreech@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

8 years agoUBIFS: fix clean znode counter corruption in error cases
Artem Bityutskiy [Tue, 31 May 2011 11:26:07 +0000]
UBIFS: fix clean znode counter corruption in error cases

UBIFS maintains per-filesystem and global clean znode counters
('c->clean_zn_cnt' and 'ubifs_clean_zn_cnt'). It is important to maintain
correct values there since the shrinker relies on 'ubifs_clean_zn_cnt'.

However, in case of failures during commit the counters were corrupted. E.g.,
if a failure happens in the middle of 'write_index()', then some nodes in the
commit list ('c->cnext') are marked as clean, and some are marked as dirty. And
the 'ubifs_destroy_tnc_subtree()' frees does not retrun correct count, and we
end up with non-zero 'c->clean_zn_cnt' when unmounting. This means that if we
have 2 file-sytem and one of them fails, and we unmount it,
'ubifs_clean_zn_cnt' stays incorrect and confuses the shrinker.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

8 years agoUBIFS: fix memory leak on error path
Artem Bityutskiy [Tue, 31 May 2011 05:40:40 +0000]
UBIFS: fix memory leak on error path

UBIFS leaks memory on error path in 'ubifs_jnl_update()' in case of write
failure because it forgets to free the 'struct ubifs_dent_node *dent' object.
Although the object is small, the alignment can make it large - e.g., 2KiB
if the min. I/O unit is 2KiB.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org

8 years agoUBIFS: fix shrinker object count reports
Artem Bityutskiy [Tue, 31 May 2011 04:03:21 +0000]
UBIFS: fix shrinker object count reports

Sometimes VM asks the shrinker to return amount of objects it can shrink,
and we return the ubifs_clean_zn_cnt in that case. However, it is possible
that this counter is negative for a short period of time, due to the way
UBIFS TNC code updates it. And I can observe the following warnings sometimes:

shrink_slab: ubifs_shrinker+0x0/0x2b7 [ubifs] negative objects to delete nr=-8541616642706119788

This patch makes sure UBIFS never returns negative count of objects.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org

8 years agoBlackfin: strncpy: fix handling of zero lengths
Steven Miao [Wed, 1 Jun 2011 07:52:41 +0000]
Blackfin: strncpy: fix handling of zero lengths

The jump to 4f will cause the NUL padding loop to run at least one time,
so if string length is zero just jump to the end.  Otherwise we wrongly
write one NUL byte when size==0.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

8 years agotimers: Consider slack value in mod_timer()
Sebastian Andrzej Siewior [Sat, 21 May 2011 10:58:28 +0000]
timers: Consider slack value in mod_timer()

There is an optimization which does not update the timer if the timer
was pending and the expiration time was unchanged.

Since commit 3bbb9ec9 ("timers: Introduce the concept of timer slack
for legacy timers") this optimization is no longer applied for timers
where the expiration time got extended due to the slack value. So we
need to check again after the expiration time might have been updated.

[ tglx: Made it a single check by applying slack first and sorting
  out the slack = 0 value (all timeouts < 256 jiffies) early ]

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Link: http://lkml.kernel.org/r/20110521105828.GA29442@Chamillionaire.breakpoint.cc
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

8 years agoALSA: asihpi: Use angle brackets for system includes
Joe Perches [Fri, 3 Jun 2011 09:28:49 +0000]
ALSA: asihpi: Use angle brackets for system includes

Use the normal include style.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoclockevents: Handle empty cpumask gracefully
Thomas Gleixner [Fri, 3 Jun 2011 09:13:33 +0000]
clockevents: Handle empty cpumask gracefully

For UP it's stupid to request an initialized cpumask for the clock
event devices. Though we need the mask set even on UP to avoid a
horrible ifdeffery especially in the broadcast code.

For SMP we can at least try to survive with a warning and set the
cpumask of the cpu we're running on. That gives a decent chance to
bring the machine up and retrieve the debug info.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Stephen Boyd <sboyd@codeaurora.org>

8 years agoALSA: fm801: add error handling if auto-detect fails
Dan Carpenter [Thu, 26 May 2011 08:47:35 +0000]
ALSA: fm801: add error handling if auto-detect fails

In the original code if auto detect failed and tea575x_tuner == 4
then we copy bogus information to chip->tea.card.  I've changed the
autodetect code to cleanup and return -ENODEV on error instead.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: hda - Check pin support EAPD in ad198x_power_eapd_write
Raymond Yau [Wed, 1 Jun 2011 07:09:48 +0000]
ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write

Check whether the pin supports EAPD in ad198x_power_eapd_write.

Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd()
Takashi Iwai [Fri, 3 Jun 2011 08:05:02 +0000]
ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd()

In ad198x_power_eapd(), wrong pin NIDs are used for controlling EAPD for
HP and Front outputs of AD1988/AD1989.  These are actually same with the
ones for AD1984 & co, port-A is 0x11 and port-D 0x12.

Reported-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agotg3: Fix tg3_skb_error_unmap()
Matt Carlson [Thu, 2 Jun 2011 13:01:39 +0000]
tg3: Fix tg3_skb_error_unmap()

This function attempts to free one fragment beyond the number of
fragments that were actually mapped.  This patch brings back the limit
to the correct spot.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: tracepoint of net_dev_xmit sees freed skb and causes panic
Koki Sanagi [Mon, 30 May 2011 21:48:34 +0000]
net: tracepoint of net_dev_xmit sees freed skb and causes panic

Because there is a possibility that skb is kfree_skb()ed and zero cleared
after ndo_start_xmit, we should not see the contents of skb like skb->len and
skb->dev->name after ndo_start_xmit. But trace_net_dev_xmit does that
and causes panic by NULL pointer dereference.
This patch fixes trace_net_dev_xmit not to see the contents of skb directly.

If you want to reproduce this panic,

1. Get tracepoint of net_dev_xmit on
2. Create 2 guests on KVM
2. Make 2 guests use virtio_net
4. Execute netperf from one to another for a long time as a network burden
5. host will panic(It takes about 30 minutes)

Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoasm-generic/unistd.h: support sendmmsg syscall
Chris Metcalf [Thu, 2 Jun 2011 18:21:45 +0000]
asm-generic/unistd.h: support sendmmsg syscall

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

8 years agoALSA: 6fire: Don't leak firmware in error path
Jesper Juhl [Mon, 30 May 2011 10:49:01 +0000]
ALSA: 6fire: Don't leak firmware in error path

One of the error paths in
sound/usb/6fire/firmware.c::usb6fire_fw_ezusb_upload() neglects to free
the memory allocated for the firmware before returning, thus leaking the
memory.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agoktest: Ignore unset values of the minconfig in config_bisect
Steven Rostedt [Thu, 2 Jun 2011 03:27:19 +0000]
ktest: Ignore unset values of the minconfig in config_bisect

By ignoring the unset values of the minconfig in deciding
what to test in the config_bisect can cause the problem
config from being tested too.

Just do not test the configs that are set in the minconfig.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

8 years agoktest: Fix result of rebooting the kernel
Steven Rostedt [Thu, 2 Jun 2011 03:25:13 +0000]
ktest: Fix result of rebooting the kernel

The command that is called that reboots the kernel may fail
but the return code is not passed back to the ktest.pl script.
This is because a ';' is used between the two commands and
if the second command fails, only the first command's return
code is returned. Using a '&&' between the two commands fixes
this.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

8 years agoktest: Fix off-by-one in config bisect result
Steven Rostedt [Thu, 2 Jun 2011 03:22:30 +0000]
ktest: Fix off-by-one in config bisect result

Because in perl the array size returned by $#arr, is the last
index and not the actually size of the array, we end the config
bisect early, thinking there is only one config left when there
are in fact two. Thus the result has a 50% chance of picking
the correct config that caused the problem.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

8 years agoMerge branch 'for-jens/xen-blkback.fixes' of git://git.kernel.org/pub/scm/linux/kerne...
Jens Axboe [Thu, 2 Jun 2011 11:14:15 +0000]
Merge branch 'for-jens/xen-blkback.fixes' of git://git./linux/kernel/git/konrad/xen into for-linus

8 years agoblock: Use hlist_entry() for io_context.cic_list.first
Paul Bolle [Thu, 2 Jun 2011 11:05:02 +0000]
block: Use hlist_entry() for io_context.cic_list.first

list_entry() and hlist_entry() are both simply aliases for
container_of(), but since io_context.cic_list.first is an hlist_node one
should at least use the correct alias.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agocfq-iosched: Remove bogus check in queue_fail path
Paul Bolle [Thu, 2 Jun 2011 11:05:02 +0000]
cfq-iosched: Remove bogus check in queue_fail path

queue_fail can only be reached if cic is NULL, so its check for cic must
be bogus.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years ago[SCSI] Fix oops caused by queue refcounting failure
James Bottomley [Wed, 25 May 2011 20:52:14 +0000]
[SCSI] Fix oops caused by queue refcounting failure

In certain circumstances, we can get an oops from a torn down device.
Most notably this is from CD roms trying to call scsi_ioctl.  The root
cause of the problem is the fact that after scsi_remove_device() has
been called, the queue is fully torn down.  This is actually wrong
since the queue can be used until the sdev release function is called.
Therefore, we add an extra reference to the queue which is released in
sdev->release, so the queue always exists.

Reported-by: Parag Warudkar <parag.lkml@gmail.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <jbottomley@parallels.com>

8 years agovideo: Convert vmalloc/memset to vzalloc
Joe Perches [Sat, 28 May 2011 18:13:33 +0000]
video: Convert vmalloc/memset to vzalloc

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agoefifb: Disallow manual bind and unbind
Andy Lutomirski [Thu, 26 May 2011 14:13:34 +0000]
efifb: Disallow manual bind and unbind

Both were buggy: bind would happily scribble over a real graphics
device and unbind wouldn't destroy the framebuffer.  Hotplugging
efifb makes no sense anyway, so just disable it.

As an added benefit, we save some runtime memory.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agoefifb: Fix mismatched request/release_mem_region
Andy Lutomirski [Thu, 26 May 2011 14:13:32 +0000]
efifb: Fix mismatched request/release_mem_region

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agoefifb: Enable write-combining
Andy Lutomirski [Thu, 26 May 2011 14:13:31 +0000]
efifb: Enable write-combining

Running fbcon on an uncached framebuffer is remarkably slow.  So try
to enable write combining in efifb.

Without this patch, it takes 5.8 seconds from efifb probe to i915
probe (default options; no plymouth or quiet mode).  With this patch,
it only takes 1.7 seconds.  That means we wasted over 4 seconds just
writing to UC memory.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agodrivers/video/pxa168fb.c: add missing clk_put
Julia Lawall [Wed, 1 Jun 2011 17:10:13 +0000]
drivers/video/pxa168fb.c: add missing clk_put

Add a label for error-handling code in the case where only clk_get has
succeeded.  Rename the label failed to be consistent with the rest.

A simplified version of the semantic match that finds the missing clk_put
is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression e1,e2;
statement S;
@@

e1 = clk_get@p1(...);
... when != e1 = e2
    when != clk_put(e1)
    when any
if (...) { ... when != clk_put(e1)
               when != if (...) { ... clk_put(e1) ... }
* return@p3 ...;
 } else S
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agodrivers/video/imxfb.c: add missing clk_put
Julia Lawall [Wed, 1 Jun 2011 17:10:11 +0000]
drivers/video/imxfb.c: add missing clk_put

Reorder the labels at the end of the function to correspond to the order in
which the resources are allocated.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression e1,e2;
statement S;
@@

e1 = clk_get@p1(...);
... when != e1 = e2
    when != clk_put(e1)
    when any
if (...) { ... when != clk_put(e1)
               when != if (...) { ... clk_put(e1) ... }
* return@p3 ...;
 } else S
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agofbdev: bf537-lq035: add missing blacklight properties type
Steven Miao [Mon, 30 May 2011 03:23:36 +0000]
fbdev: bf537-lq035: add missing blacklight properties type

Seems this new field was missed, probably due to this driver being merged
around the time this new backlight field was being added.  At any rate,
initial the type field to avoid ugly WARN() dumps.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agosavagefb: Use panel CVT mode as default
Tormod Volden [Sat, 28 May 2011 15:06:11 +0000]
savagefb: Use panel CVT mode as default

If there is no EDID but an LCD panel is detected, generate a CVT
mode from the panel resolution (at 60 Hz), and use this as a
default mode instead of the hardcoded 800x600x8 mode.

Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agofbdev: sh_mobile_lcdcfb: Fix up fallout from MERAM changes.
Paul Mundt [Thu, 26 May 2011 06:01:22 +0000]
fbdev: sh_mobile_lcdcfb: Fix up fallout from MERAM changes.

The LCDC driver does no longer compile:

CC drivers/video/sh_mobile_meram.o
CC drivers/video/sh_mobile_lcdcfb.o
drivers/video/sh_mobile_lcdcfb.c: In function 'sh_mobile_lcdc_start':
drivers/video/sh_mobile_lcdcfb.c:640:4: error: 'ret' undeclared (first use in this function)
drivers/video/sh_mobile_lcdcfb.c:640:4: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [drivers/video/sh_mobile_lcdcfb.o] Error 1
make[1]: *** [drivers/video] Error 2
make: *** [drivers] Error 2

Reported-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agodrivers/net/can/flexcan.c: add missing clk_put
Julia Lawall [Wed, 1 Jun 2011 19:48:50 +0000]
drivers/net/can/flexcan.c: add missing clk_put

The failed_get label is used after the call to clk_get has succeeded, so it
should be moved up above the call to clk_put.

The failed_req labels doesn't do anything different than failed_get, so
delete it.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression e1,e2;
statement S;
@@

e1 = clk_get@p1(...);
... when != e1 = e2
    when != clk_put(e1)
    when any
if (...) { ... when != clk_put(e1)
               when != if (...) { ... clk_put(e1) ... }
* return@p3 ...;
 } else S
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoARM: mach-shmobile: add DMAC clock definitions on SH7372
Guennadi Liakhovetski [Wed, 1 Jun 2011 07:32:07 +0000]
ARM: mach-shmobile: add DMAC clock definitions on SH7372

These definitions are needed to let the runtime PM subsystem turn off
DMAC clocks, when it is suspended by the driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agodmaengine: shdma: fix a regression: initialise DMA channels for memcpy
Guennadi Liakhovetski [Tue, 31 May 2011 09:25:16 +0000]
dmaengine: shdma: fix a regression: initialise DMA channels for memcpy

A recent patch has introduced a regression, where repeating a memcpy
DMA test with shdma module unloading between them skips the DMA channel
configuration. Fix this regression by always configuring the channel
during its allocation.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 years agonet: dm9000: Get the chip in a known good state before enabling interrupts
Mark Brown [Wed, 1 Jun 2011 10:18:09 +0000]
net: dm9000: Get the chip in a known good state before enabling interrupts

Currently the DM9000 driver requests the primary interrupt before it
resets the chip and puts it into a known good state. This means that if
the chip is asserting interrupt for some reason we can end up with a
screaming IRQ that the interrupt handler is unable to deal with. Avoid
this by only requesting the interrupt after we've reset the chip so we
know what state it's in.

This started manifesting itself on one of my boards in the past month or
so, I suspect as a result of some core infrastructure changes removing
some form of mitigation against bad behaviour here, even when things boot
it seems that the new code brings the interface up more quickly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodrivers/net/davinci_emac.c: add missing clk_put
Julia Lawall [Wed, 1 Jun 2011 07:10:10 +0000]
drivers/net/davinci_emac.c: add missing clk_put

Go to existing error handling code at the end of the function that calls
clk_put.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression e1,e2;
statement S;
@@

e1 = clk_get@p1(...);
... when != e1 = e2
    when != clk_put(e1)
    when any
if (...) { ... when != clk_put(e1)
               when != if (...) { ... clk_put(e1) ... }
* return@p3 ...;
 } else S
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoaf-packet: Add flag to distinguish VID 0 from no-vlan.
Ben Greear [Wed, 1 Jun 2011 06:49:10 +0000]
af-packet: Add flag to distinguish VID 0 from no-vlan.

Currently, user-space cannot determine if a 0 tcp_vlan_tci
means there is no VLAN tag or the VLAN ID was zero.

Add flag to make this explicit.  User-space can check for
TP_STATUS_VLAN_VALID || tp_vlan_tci > 0, which will be backwards
compatible. Older could would have just checked for tp_vlan_tci,
so it will work no worse than before.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocaif: Fix race when conditionally taking rtnl lock
sjur.brandeland@stericsson.com [Wed, 1 Jun 2011 00:55:37 +0000]
caif: Fix race when conditionally taking rtnl lock

Take the RTNL lock unconditionally when calling dev_close.
Taking the lock conditionally may cause race conditions.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agousbnet/cdc_ncm: add missing .reset_resume hook
Stefan Metzmacher [Wed, 1 Jun 2011 02:01:41 +0000]
usbnet/cdc_ncm: add missing .reset_resume hook

This avoids messages like this after suspend:

   cdc_ncm 2-1.4:1.6: no reset_resume for driver cdc_ncm?
   cdc_ncm 2-1.4:1.7: no reset_resume for driver cdc_ncm?
   cdc_ncm 2-1.4:1.6: usb0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, CDC NCM

This is important for the Ericsson F5521gw GSM/UMTS modem.
Otherwise modemmanager looses the fact that the cdc_ncm and cdc_acm devices
belong together.

The cdc_ether module does the same.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agovlan: fix typo in vlan_dev_hard_start_xmit()
Wei Yongjun [Tue, 31 May 2011 22:53:19 +0000]
vlan: fix typo in vlan_dev_hard_start_xmit()

commit 4af429d29b341bb1735f04c2fb960178ed5d52e7 (vlan: lockless
transmit path) have a typo in vlan_dev_hard_start_xmit(), using
u64_stats_update_begin() to end the stat update, it should be
u64_stats_update_end().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/ipv4: Check for mistakenly passed in non-IPv4 address
Marcus Meissner [Thu, 2 Jun 2011 04:05:22 +0000]
net/ipv4: Check for mistakenly passed in non-IPv4 address

Check against mistakenly passing in IPv6 addresses (which would result
in an INADDR_ANY bind) or similar incompatible sockaddrs.

Signed-off-by: Marcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>