9 years agovirtio: refactor find_vqs
Michael S. Tsirkin [Sun, 26 Jul 2009 12:48:08 +0000]
virtio: refactor find_vqs

This refactors find_vqs, making it more readable and robust, and fixing
two regressions from 2.6.30:
- double free_irq causing BUG_ON on device removal
- probe failure when vq can't be assigned to msi-x vector
  (reported on old host kernels)

Tested-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

9 years agovirtio: delete vq from list
Michael S. Tsirkin [Sun, 26 Jul 2009 12:48:01 +0000]
virtio: delete vq from list

This makes delete vq the reverse of find vq.
This is required to make it possible to retry find_vqs
after a failure, otherwise the list gets corrupted.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

9 years agovirtio: fix memory leak on device removal
Michael S. Tsirkin [Thu, 23 Jul 2009 11:57:37 +0000]
virtio: fix memory leak on device removal

Make vp_free_vectors do the reverse of vq_request_vectors.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

9 years agolguest: fix descriptor corruption in example launcher
Rusty Russell [Thu, 30 Jul 2009 22:03:43 +0000]
lguest: fix descriptor corruption in example launcher

1d589bb16b825b3a7b4edd34d997f1f1f953033d "Add serial number support
for virtio_blk, V4a" extended 'struct virtio_blk_config' to 536 bytes.
Lguest and S/390 both use an 8 bit value for the feature length, and
this change broke them (if the code is naive).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: John Cooper <john.cooper@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>

9 years agolguest: dereferencing freed mem in add_eventfd()
Dan Carpenter [Sun, 19 Jul 2009 11:46:09 +0000]
lguest: dereferencing freed mem in add_eventfd()

"new" was freed and then dereferenced.  Also the return value wasn't being
used so I modified the caller as well.

Compile tested only.  Found by smatch (http://repo.or.cz/w/smatch.git).

regards,
dan carpenter

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

9 years agoMerge branch 'i2c-fixes-rc4' of git://aeryn.fluff.org.uk/bjdooks/linux
Linus Torvalds [Thu, 30 Jul 2009 02:39:22 +0000]
Merge branch 'i2c-fixes-rc4' of git://aeryn.fluff.org.uk/bjdooks/linux

* 'i2c-fixes-rc4' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-omap: OMAP3430 Silicon Errata 1.153
  i2c-omap: In case of a NACK|ARDY|AL return from the ISR
  i2c-omap: Bug in reading the RXSTAT/TXSTAT values from the I2C_BUFFSTAT register
  i2c-sh_mobile: change module_init() to subsys_initcall()
  i2c: strncpy does not null terminate string
  i2c-s3c2410: s3c24xx_i2c_init: don't clobber IICLC value

9 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Thu, 30 Jul 2009 02:15:18 +0000]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Hibernate: Replace bdget call with simple atomic_inc of i_count
  PM / ACPI: HP G7000 Notebook needs a SCI_EN resume quirk

9 years agoMAINTAINERS: update HP Jornada 700-series and Epson s1d13xxxfb support
Kristoffer Ericson [Wed, 29 Jul 2009 22:04:32 +0000]
MAINTAINERS: update HP Jornada 700-series and Epson s1d13xxxfb support

Add the relevant git repositories and affected files to the maintainership
of HP Jornada 700-series and Epson s1d13xxxfb support.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: finish off the email address coalescing
Joe Perches [Wed, 29 Jul 2009 22:04:32 +0000]
MAINTAINERS: finish off the email address coalescing

Add some touchups to the sample record.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: coalesce name and email address lines
Joe Perches [Wed, 29 Jul 2009 22:04:30 +0000]
MAINTAINERS: coalesce name and email address lines

Switch the MAINTAINERS email address format from

P: Linus Torvalds
M: torvalds@linux-foundation.org

to

M: Linus Torvalds <torvalds@linux-foundation.org>

Mainly to ease the copy-n-pasting of maitnainer addresses into email clients.

The script to perform this operation:

#! /bin/sh
#
# Change MAINTAINERS from
# P: name
# M: address
# to:
# M: name <address>
#
# Integrate P: and M: lines
#
perl -i -e 'local $/; while(<>) { s@P: ([^\n]+)\nM: ([^\n]+)\n@M: \1 <\2>\n@g; print; }' MAINTAINERS
#
# Quote names with periods, commas and parentheses
#
sed -r -i -e "s/^M: (.+)([\.,'\(])(.*) </M: \"\1\2\3\" </g" MAINTAINERS

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoget_maintainerpl-add-git-min-percent-option-fix
Joe Perches [Wed, 29 Jul 2009 22:04:29 +0000]
get_maintainerpl-add-git-min-percent-option-fix

Allow an option to control the minimum percentage of sign-offs required
before being considered a maintainer.

git-min-percent has a default value of 5

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoget_maintainer.pl: Add git-min-percent option
Joe Perches [Wed, 29 Jul 2009 22:04:28 +0000]
get_maintainer.pl: Add git-min-percent option

Allow an option to control the minimum percentage of sign-offs required
before being considered a maintainer.

git-min-percent has a default value of 5

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoscripts/get_maintainer.pl: Add -f directory use
Joe Perches [Wed, 29 Jul 2009 22:04:28 +0000]
scripts/get_maintainer.pl: Add -f directory use

Don't require a specific file in a directory to be tested.

Also Arnd Bergmann pointed out that the MAINTAINERS pattern requirement
that directory patterns have a trailing slash was unnecessary and was
likely to be error prone.  Removed that requirement.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Scott Murray is no longer with SomaNetworks
Joe Perches [Wed, 29 Jul 2009 22:04:27 +0000]
MAINTAINERS: Scott Murray is no longer with SomaNetworks

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: QLOGIC QLA3XXX - Add Ron Mercer email address
Joe Perches [Wed, 29 Jul 2009 22:04:27 +0000]
MAINTAINERS: QLOGIC QLA3XXX - Add Ron Mercer email address

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: QLOGIC QLA2XXX - add Andrew Vasquez email address
Joe Perches [Wed, 29 Jul 2009 22:04:26 +0000]
MAINTAINERS: QLOGIC QLA2XXX - add Andrew Vasquez email address

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Remove CS461x sound card section
Joe Perches [Wed, 29 Jul 2009 22:04:26 +0000]
MAINTAINERS: Remove CS461x sound card section

Thomas Woller's email address bounces
Nils Faerber isn't active

Added Thomas Woller to CREDITS, Nils already has an entry

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: INPUT: Add Dmitry's name to his email address
Joe Perches [Wed, 29 Jul 2009 22:04:25 +0000]
MAINTAINERS: INPUT: Add Dmitry's name to his email address

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: USB Serial Digi Acceleport: use separate P: for Al Borchers
Joe Perches [Wed, 29 Jul 2009 22:04:25 +0000]
MAINTAINERS: USB Serial Digi Acceleport: use separate P: for Al Borchers

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Add PPS patterns
Joe Perches [Wed, 29 Jul 2009 22:04:24 +0000]
MAINTAINERS: Add PPS patterns

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Update KERNEL JANITORS
Joe Perches [Wed, 29 Jul 2009 22:04:24 +0000]
MAINTAINERS: Update KERNEL JANITORS

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Move ARPD to CREDITS
Joe Perches [Wed, 29 Jul 2009 22:04:23 +0000]
MAINTAINERS: Move ARPD to CREDITS

Jonathan Layes is hard to find.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Remove L: linux-kernel@vger.kernel.org
Joe Perches [Wed, 29 Jul 2009 22:04:23 +0000]
MAINTAINERS: Remove L: linux-kernel@vger.

from sections that should not have them.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Use tabs in ACER ASPIRE ONE
Joe Perches [Wed, 29 Jul 2009 22:04:22 +0000]
MAINTAINERS: Use tabs in ACER ASPIRE ONE

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: QLGE 10Gb ETHERNET - pair P:/M: entries properly
Joe Perches [Wed, 29 Jul 2009 22:04:21 +0000]
MAINTAINERS: QLGE 10Gb ETHERNET - pair P:/M: entries properly

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: Remove ivtv-user lists, add CX18 url
Joe Perches [Wed, 29 Jul 2009 22:04:21 +0000]
MAINTAINERS: Remove ivtv-user lists, add CX18 url

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMAINTAINERS: IA64 - pair P:/M: entries properly
Joe Perches [Wed, 29 Jul 2009 22:04:20 +0000]
MAINTAINERS: IA64 - pair P:/M: entries properly

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agouio: mark uio.h functions __KERNEL__ only
Jiri Slaby [Wed, 29 Jul 2009 22:04:19 +0000]
uio: mark uio.h functions __KERNEL__ only

To avoid userspace build failures such as:

.../linux/uio.h:37: error: expected `=', `,', `;', `asm' or `__attribute__' before `iov_length'
.../linux/uio.h:47: error: expected declaration specifiers or `...' before `size_t'

move uio functions inside a __KERNEL__ block.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/serial/atmel_serial.c: fix compile when CONFIG_SERIAL_ATMEL=Y and CONFIG_SERI...
Albin Tonnerre [Wed, 29 Jul 2009 22:04:18 +0000]
drivers/serial/atmel_serial.c: fix compile when CONFIG_SERIAL_ATMEL=Y and CONFIG_SERIAL_ATMEL_CONSOLE=N

When SERIAL_ATMEL_CONSOLE is disabled, ATMEL_CONSOLE_DEVICE is set to
NULL, and trying to access ATMEL_CONSOLE_DEVICE->flags in
atmel_serial_probe makes the compile fail.  This fixes the issue by only
accessing it if CONFIG_SERIAL_ATMEL_CONSOLE is defined

Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolib: flexible array implementation
Dave Hansen [Wed, 29 Jul 2009 22:04:18 +0000]
lib: flexible array implementation

Once a structure goes over PAGE_SIZE*2, we see occasional allocation
failures.  Some people have chosen to switch over to things like vmalloc()
that will let them keep array-like access to such a large structures.
But, vmalloc() has plenty of downsides.

Here's an alternative.  I think it's what Andrew was suggesting here:

http://lkml.org/lkml/2009/7/2/518

I call it a flexible array.  It does all of its work in PAGE_SIZE bits, so
never does an order>0 allocation.  The base level has
PAGE_SIZE-2*sizeof(int) bytes of storage for pointers to the second level.
 So, with a 32-bit arch, you get about 4MB (4183112 bytes) of total
storage when the objects pack nicely into a page.  It is half that on
64-bit because the pointers are twice the size.  There's a table detailing
this in the code.

There are kerneldocs for the functions, but here's an
overview:

flex_array_alloc() - dynamically allocate a base structure
flex_array_free() - free the array and all of the
    second-level pages
flex_array_free_parts() - free the second-level pages, but
  not the base (for static bases)
flex_array_put() - copy into the array at the given index
flex_array_get() - copy out of the array at the given index
flex_array_prealloc() - preallocate the second-level pages
between the given indexes to
guarantee no allocs will occur at
put() time.

We could also potentially just pass the "element_size" into each of the
API functions instead of storing it internally.  That would get us one
more base pointer on 32-bit.

I've been testing this by running it in userspace.  The header and patch
that I've been using are here, as well as the little script I'm using to
generate the size table which goes in the kerneldocs.

http://sr71.net/~dave/linux/flexarray/

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agosdhci: get rid of "frequency too high" flood when using eSDHC
Anton Vorontsov [Wed, 29 Jul 2009 22:04:16 +0000]
sdhci: get rid of "frequency too high" flood when using eSDHC

Since commit 8dfd0374be84793360db7fff2e635d2cd3bbcb21 ("MMC core: limit
minimum initialization frequency to 400kHz") MMC core checks for minimum
frequency, and that causes following messages flood when using eSDHC
controllers:

  ...
  mmc0: Minimum clock frequency too high for identification mode
  mmc0: Minimum clock frequency too high for identification mode
  ...

The warnings are legitimate, since if we'd use 133 MHz clocks for standard
SDHCI controllers, we'd not able to scale frequency down to 400 kHz.

But eSDHC controllers have a non-standard SD clock management, so we can
divide clock by 256 * 16, not just 256.

This patch introduces get_min_clock() callback for sdhci core and
implements it for sdhci-of driver, and thus fixes the issue.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agosysrq, kdump: make sysrq-c consistent
Hidetoshi Seto [Wed, 29 Jul 2009 22:04:14 +0000]
sysrq, kdump: make sysrq-c consistent

commit d6580a9f15238b87e618310c862231ae3f352d2d ("kexec: sysrq: simplify
sysrq-c handler") changed the behavior of sysrq-c to unconditional
dereference of NULL pointer.  So in cases with CONFIG_KEXEC, where
crash_kexec() was directly called from sysrq-c before, now it can be said
that a step of "real oops" was inserted before starting kdump.

However, in contrast to oops via SysRq-c from keyboard which results in
panic due to in_interrupt(), oops via "echo c > /proc/sysrq-trigger" will
not become panic unless panic_on_oops=1.  It means that even if dump is
properly configured to be taken on panic, the sysrq-c from proc interface
might not start crashdump while the sysrq-c from keyboard can start
crashdump.  This confuses traditional users of kdump, i.e.  people who
expect sysrq-c to do common behavior in both of the keyboard and proc
interface.

This patch brings the keyboard and proc interface behavior of sysrq-c in
line, by forcing panic_on_oops=1 before oops in sysrq-c handler.

And some updates in documentation are included, to clarify that there is
no longer dependency with CONFIG_KEXEC, and that now the system can just
crash by sysrq-c if no dump mechanism is configured.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Brayan Arraes <brayan@yack.com.br>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agopps.h needs <linux/types.h>
Dave Jones [Wed, 29 Jul 2009 22:04:12 +0000]
pps.h needs <linux/types.h>

Found with make headers_check

/usr/include/linux/pps.h:52: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofs/ramfs/file-nommu.c needs include/linux/sched.h
Catalin Marinas [Wed, 29 Jul 2009 22:04:11 +0000]
fs/ramfs/file-nommu.c needs include/linux/sched.h

This file makes use of various macros defined in files like asm/current.h
or asm-generic/resource.h.  All these files can be included via sched.h.
The building of the !MMU ARM kernel (with additional patches) fails
without this change.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agonet-dccp: suppress warning about large allocations from DCCP
Mel Gorman [Wed, 29 Jul 2009 22:04:10 +0000]
net-dccp: suppress warning about large allocations from DCCP

The DCCP protocol tries to allocate some large hash tables during
initialisation using the largest size possible.  This can be larger than
what the page allocator can provide so it prints a warning.  However, the
caller is able to handle the situation so this patch suppresses the
warning.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoprofile: suppress warning about large allocations when profile=1 is specified
Mel Gorman [Wed, 29 Jul 2009 22:04:09 +0000]
profile: suppress warning about large allocations when profile=1 is specified

When profile= is used, a large buffer is allocated early at boot.  This
can be larger than what the page allocator can provide so it prints a
warning.  However, the caller is able to handle the situation so this
patch suppresses the warning.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agopage-allocator: allow too high-order warning messages to be suppressed with __GFP_NOWARN
Mel Gorman [Wed, 29 Jul 2009 22:04:08 +0000]
page-allocator: allow too high-order warning messages to be suppressed with __GFP_NOWARN

The page allocator warns once when an order >= MAX_ORDER is specified.
This is to catch callers of the allocator that are always falling back to
their worst-case when it was not expected.  However, there are cases where
the caller is behaving correctly but cannot suppress the warning.  This
patch allows the warning to be suppressed by the callers by specifying
__GFP_NOWARN.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocgroup avoid permanent sleep at rmdir
KAMEZAWA Hiroyuki [Wed, 29 Jul 2009 22:04:06 +0000]
cgroup avoid permanent sleep at rmdir

After commit ec64f51545fffbc4cb968f0cea56341a4b07e85a ("cgroup: fix
frequent -EBUSY at rmdir"), cgroup's rmdir (especially against memcg)
doesn't return -EBUSY by temporary ref counts.  That commit expects all
refs after pre_destroy() is temporary but...it wasn't.  Then, rmdir can
wait permanently.  This patch tries to fix that and change followings.

 - set CGRP_WAIT_ON_RMDIR flag before pre_destroy().
 - clear CGRP_WAIT_ON_RMDIR flag when the subsys finds racy case.
   if there are sleeping ones, wakes them up.
 - rmdir() sleeps only when CGRP_WAIT_ON_RMDIR flag is set.

Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Paul Menage <menage@google.com>
Acked-by: Balbir Sigh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoeeprom/at25: bugfix "not ready" timeout after write
Sebastian Heutling [Wed, 29 Jul 2009 22:04:05 +0000]
eeprom/at25: bugfix "not ready" timeout after write

Under certain circumstances msleep(1) within the loop, which waits for the
EEPROM to be finished, might take longer than the timeout.  On the next
loop the status register might now return to be ready and therefore the
loop finishes.  The following check now tests if a timeout occurred and if
so returns an error although the device reported it was ready.

This fix replaces testing the occurrence of the timeout by testing the
"not ready" bit in the status register.

Signed-off-by: Sebastian Heutling <heutling@who-ing.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocgroups: fix pid namespace bug
Li Zefan [Wed, 29 Jul 2009 22:04:04 +0000]
cgroups: fix pid namespace bug

The bug was introduced by commit cc31edceee04a7b87f2be48f9489ebb72d264844
("cgroups: convert tasks file to use a seq_file with shared pid array").

We cache a pid array for all threads that are opening the same "tasks"
file, but the pids in the array are always from the namespace of the
last process that opened the file, so all other threads will read pids
from that namespace instead of their own namespaces.

To fix it, we maintain a list of pid arrays, which is keyed by pid_ns.
The list will be of length 1 at most time.

Reported-by: Paul Menage <menage@google.com>
Idea-by: Paul Menage <menage@google.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/video/backlight/jornada720_bl.c: fix build
Kristoffer Ericson [Wed, 29 Jul 2009 22:04:03 +0000]
drivers/video/backlight/jornada720_bl.c: fix build

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agolib: export generic atomic64_t functions
Roland Dreier [Wed, 29 Jul 2009 22:04:02 +0000]
lib: export generic atomic64_t functions

The generic atomic64_t implementation in lib/ did not export the functions
it defined, which means that modules that use atomic64_t would not link on
platforms (such as 32-bit powerpc).  For example, trying to build a kernel
with CONFIG_NET_RDS on such a platform would fail with:

    ERROR: "atomic64_read" [net/rds/rds.ko] undefined!
    ERROR: "atomic64_set" [net/rds/rds.ko] undefined!

Fix this by exporting the atomic64_t functions to modules.  (I export the
entire API even if it's not all currently used by in-tree modules to avoid
having to continue fixing this in dribs and drabs)

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agohugetlbfs: fix i_blocks accounting
Eric Sandeen [Wed, 29 Jul 2009 22:02:16 +0000]
hugetlbfs: fix i_blocks accounting

As reported in Red Hat bz #509671, i_blocks for files on hugetlbfs get
accounting wrong when doing something like:

   $ > foo
   $ date  > foo
   date: write error: Invalid argument
   $ /usr/bin/stat foo
     File: `foo'
     Size: 0          Blocks: 18446744073709547520 IO Block: 2097152 regular
...

This is because hugetlb_unreserve_pages() is unconditionally removing
blocks_per_huge_page(h) on each call rather than using the freed amount.
If there were 0 blocks, it goes negative, resulting in the above.

This is a regression from commit a5516438959d90b071ff0a484ce4f3f523dc3152
("hugetlb: modular state for hugetlb page size")

which did:

- inode->i_blocks -= BLOCKS_PER_HUGEPAGE * freed;
+ inode->i_blocks -= blocks_per_huge_page(h);

so just put back the freed multiplier, and it's all happy again.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Andi Kleen <andi@firstfloor.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agortc: mark if rtc-cmos drivers were successfully registered
Thadeu Lima de Souza Cascardo [Wed, 29 Jul 2009 22:02:13 +0000]
rtc: mark if rtc-cmos drivers were successfully registered

rtc-cmos has two drivers, one PNP and one platform.  When PNP has not
succeeded probing, platform is registered.  However, it tries to
unregister both drivers unconditionally, instead of only unregistering
those that were successfully registered.  This causes runtime warnings to
be emitted from the driver core code.

Fix this with a boolean variable for each driver indicating whether
registering was successful.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Cc: Ozan Caglayan <ozan@pardus.org.tr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agospi: omap2_mcspi rxdma bugfix
Eero Nurkkala [Wed, 29 Jul 2009 22:02:12 +0000]
spi: omap2_mcspi rxdma bugfix

When data is read through DMA, the last element must be read separately
through the RX register.  It cannot be transferred by the DMA.  For
further details see e.g.  OMAP35x TRM (table 19-16).

Without the fix the driver causes extra clocks to be clocked to the bus
after DMA RX operations.  This can cause interesting behaviour with some
devices.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
[aaro.koskinen@nokia.com: Simplified the patch while keeping the idea.]
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agospi: omap2_mcspi supports wake events
Jouni Hogander [Wed, 29 Jul 2009 22:02:11 +0000]
spi: omap2_mcspi supports wake events

Currently mcspi wake-ups are not enabled.  This might cause cases where
OMAP is not waking up on mcspi events.

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agos3c-fb: fix off-by-one bug in loop indexes
Pawel Osciak [Wed, 29 Jul 2009 22:02:10 +0000]
s3c-fb: fix off-by-one bug in loop indexes

Fixed off-by-one bug in loop indexes - some elements beyond windows' array
were accessed, which might result in memory access violations when
removing/suspending the device.

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoedac: x38 fix mchbar high register addr
Lu Zhihe [Wed, 29 Jul 2009 22:02:09 +0000]
edac: x38 fix mchbar high register addr

Intel X38 MCHBAR is a 64bits register, base from 0x48, so its higher base
is 0x4C.

Signed-off-by: Lu Zhihe <tombowfly@gmail.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org> [2.6.30.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agokexec: fix omitting offset in extended crashkernel syntax
Hidetoshi Seto [Wed, 29 Jul 2009 22:02:08 +0000]
kexec: fix omitting offset in extended crashkernel syntax

Setting
 "crashkernel=512M-2G:64M,2G-:128M"
does not work but it turns to work if it has a trailing-whitespace,
like
 "crashkernel=512M-2G:64M,2G-:128M ".

It was because of a bug in the parser, running over the cmdline.

This patch adds a check of the termination.

Reported-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Tested-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomm: copy over oom_adj value at fork time
Rik van Riel [Wed, 29 Jul 2009 22:02:07 +0000]
mm: copy over oom_adj value at fork time

Fix a post-2.6.31 regression which was introduced by
2ff05b2b4eac2e63d345fc731ea151a060247f53 ("oom: move oom_adj value from
task_struct to mm_struct").

After moving the oom_adj value from the task struct to the mm_struct, the
oom_adj value was no longer properly inherited by child processes.

Copying over the oom_adj value at fork time fixes that bug.

[kosaki.motohiro@jp.fujitsu.com: test for current->mm before dereferencing it]
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Paul Menage <manage@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomm: avoid endless looping for oom killed tasks
David Rientjes [Wed, 29 Jul 2009 22:02:06 +0000]
mm: avoid endless looping for oom killed tasks

If a task is oom killed and still cannot find memory when trying with
no watermarks, it's better to fail the allocation attempt than to loop
endlessly.  Direct reclaim has already failed and the oom killer will
be a no-op since current has yet to die, so there is no other
alternative for allocations that are not __GFP_NOFAIL.

Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agopage-allocator: preserve PFN ordering when __GFP_COLD is set
Mel Gorman [Wed, 29 Jul 2009 22:02:04 +0000]
page-allocator: preserve PFN ordering when __GFP_COLD is set

Fix a post-2.6.24 performace regression caused by
3dfa5721f12c3d5a441448086bee156887daa961 ("page-allocator: preserve PFN
ordering when __GFP_COLD is set").

Narayanan reports "The regression is around 15%.  There is no disk controller
as our setup is based on Samsung OneNAND used as a memory mapped device on a
OMAP2430 based board."

The page allocator tries to preserve contiguous PFN ordering when returning
pages such that repeated callers to the allocator have a strong chance of
getting physically contiguous pages, particularly when external fragmentation
is low.  However, of the bulk of the allocations have __GFP_COLD set as they
are due to aio_read() for example, then the PFNs are in reverse PFN order.
This can cause performance degration when used with IO controllers that could
have merged the requests.

This patch attempts to preserve the contiguous ordering of PFNs for users of
__GFP_COLD.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reported-by: Narayananu Gopalakrishnan <narayanan.g@samsung.com>
Tested-by: Narayanan Gopalakrishnan <narayanan.g@samsung.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomarkup_oops: fix it with 32-bit userspace on a 64-bit kernel
Matthew Wilcox [Wed, 29 Jul 2009 22:02:03 +0000]
markup_oops: fix it with 32-bit userspace on a 64-bit kernel

A 32-bit perl can't handle 64-bit addresses without using the BigInt
package.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoi2c-omap: OMAP3430 Silicon Errata 1.153
Sonasath, Moiz [Tue, 21 Jul 2009 15:15:12 +0000]
i2c-omap: OMAP3430 Silicon Errata 1.153

When an XRDY/XDR is hit, wait for XUDF before writing data to DATA_REG.
Otherwise some data bytes can be lost while transferring them from the
memory to the I2C interface.

Do a Busy-wait for XUDF, before writing data to DATA_REG. While waiting
if there is NACK | AL, set the appropriate error flags, ack the pending
interrupts and return from the ISR.

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram pandita <vikram.pandita@ti.com>
[ben-linux@fluff.org: fixed mail format and added i2c-omap to subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c-omap: In case of a NACK|ARDY|AL return from the ISR
Sonasath, Moiz [Tue, 21 Jul 2009 15:14:40 +0000]
i2c-omap: In case of a NACK|ARDY|AL return from the ISR

In case of a NACK or ARDY or AL interrupt, complete the request.
There is no need to service the RRDY/RDR or XRDY/XDR interrupts.

Refer TRM SWPU114: Figure 18-31.I2C Master Transmitter Mode, Interrupt Method,
in F/S and HS Modes

http://focus.ti.com/pdfs/wtbu/SWPU114T_PrelimFinalEPDF_06_25_2009.pdf

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram pandita <vikram.pandita@ti.com>
[ben-linux@fluff.org: fixed mail format and added i2c-omap to subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c-omap: Bug in reading the RXSTAT/TXSTAT values from the I2C_BUFFSTAT register
Sonasath, Moiz [Tue, 21 Jul 2009 15:14:06 +0000]
i2c-omap: Bug in reading the RXSTAT/TXSTAT values from the I2C_BUFFSTAT register

Fix bug in reading the I2C_BUFFSTAT register for getting byte count on RX/TX interrupt.

On Interrupt: I2C_STAT[RDR],
read 'RXSTAT' from I2C_BUFFSTAT[8-13]
On Interrupt: I2C_STAT[XDR]
read 'TXSTAT' from I2C_BUFFSTAT[0-5]

Signed-off-by: Jagadeesh Pakaravoor <j-pakaravoor@ti.com>
Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Vikram pandita <vikram.pandita@ti.com>
[ben-linux@fluff.org: fixed mail format and added i2c-omap to subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c-sh_mobile: change module_init() to subsys_initcall()
Magnus Damm [Wed, 22 Jul 2009 14:58:39 +0000]
i2c-sh_mobile: change module_init() to subsys_initcall()

Convert the i2c-sh_mobile i2c bus driver to use
subsys_initcall() instead of module_init().

This change makes the driver register a bit earlier which
together with earlier platform data moves the time for probe().
The earlier probe() makes it possible to use i2c_get_adapter()
and i2c_transfer() from device_initcall().

The same strategy is used by other i2c bus drivers such as
i2c-pxa.c and i2c-s3c2410.c.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
[ben-linux@fluff.org: minor subject updaye]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c: strncpy does not null terminate string
Roel Kluin [Fri, 17 Jul 2009 13:24:00 +0000]
i2c: strncpy does not null terminate string

strlcpy() will always null terminate the string.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c-s3c2410: s3c24xx_i2c_init: don't clobber IICLC value
Peter Korsgaard [Fri, 17 Jul 2009 20:33:37 +0000]
i2c-s3c2410: s3c24xx_i2c_init: don't clobber IICLC value

s3c24xx_i2c_init() was overwriting the IICLC value set just above in
s3c24xx_i2c_clockrate() with zero, effectively disabling the platform
line control setting.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agokmemleak: Protect the seq start/next/stop sequence by rcu_read_lock()
Catalin Marinas [Wed, 29 Jul 2009 15:26:57 +0000]
kmemleak: Protect the seq start/next/stop sequence by rcu_read_lock()

Objects passed to kmemleak_seq_next() have an incremented reference
count (hence not freed) but they may point via object_list.next to
other freed objects. To avoid this, the whole start/next/stop sequence
must be protected by rcu_read_lock().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlie...
Linus Torvalds [Wed, 29 Jul 2009 19:31:59 +0000]
Merge branch 'drm-radeon-kms' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits)
  drm/radeon: set fb aperture sizes for framebuffer handoff.
  drm/ttm: fix highuser vs dma32 confusion.
  drm/radeon: Fix size used for benchmarking BO copies.
  drm/radeon: Add radeon.test parameter for running BO GPU copy tests.
  drm/radeon/kms: allow interruptible waits for objects.
  drm/ttm: powerpc: Fix Highmem cache flushing.
  x86: Export kmap_atomic_prot() needed for TTM.
  drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes.
  drm/ttm: Fix an oops and sync object leak.
  drm/radeon/kms: vram sizing on certain r100 chips needs workaround.
  drm/radeon: Pay more attention to object placement requested by userspace.
  drm/radeon: Fall back to evicting BOs with memcpy if necessary.
  drm/radeon: Don't unreserve twice on failure to validate.
  drm/radeon/kms: fix bandwidth computation on avivo hardware
  drm/radeon/kms: add initial colortiling support.
  drm/radeon/kms: fix hotspot handling on pre-avivo chips
  drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740
  drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq
  drm/radeon/kms: block RN50 from using 3D engine.
  drm/radeon/kms: fix VRAM sizing like DDX does it.
  ...

9 years agoMerge branch 'zero-length' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 29 Jul 2009 19:30:54 +0000]
Merge branch 'zero-length' of git://git./linux/kernel/git/jgarzik/misc-2.6

* 'zero-length' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  Remove zero-length file drivers/char/vr41xx_giu.c

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Wed, 29 Jul 2009 19:29:39 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: accept late unlocking of HPA
  libata: Updates and fixes for pata_at91 driver
  ata_piix: Add new short cable ID
  ata_piix: Add new laptop short cable IDs
  ahci: add device IDs for Ibex Peak ahci controllers
  libata: remove superfluous NULL pointer checks
  libata: add missing NULL pointer check to ata_eh_reset()
  pata_pcmcia: add CNF-CDROM-ID

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Wed, 29 Jul 2009 19:29:08 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  driver core: documentation: make it clear that sysfs is optional
  driver core: sysdev: do not send KOBJ_ADD uevent if kobject_init_and_add fails
  Dynamic debug: fix typo: -/->
  driver core: firmware_class:fix memory leak of page pointers array
  sysfs: fix hardlink count on device_move

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Wed, 29 Jul 2009 19:28:49 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: udlfb: Add vmalloc.h include
  staging: remove aten2011 driver
  Staging: android: lowmemorykiller.c: fix it for "oom: move oom_adj value from task_struct to mm_struct"
  Staging: serqt_usb2: fix memory leak in error case
  Staging: serqt_usb2: add missing calls to tty_kref_put()

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 29 Jul 2009 19:28:23 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (34 commits)
  USB: xhci: Stall handling bug fixes.
  USB: xhci: Support for 64-byte contexts
  USB: xhci: Always align output device contexts to 64 bytes.
  USB: xhci: Scratchpad buffer allocation
  USB: Fix parsing of SuperSpeed Endpoint Companion descriptor.
  USB: xhci: Fail gracefully if there's no SS ep companion descriptor.
  USB: xhci: Handle babble errors on transfers.
  USB: xhci: Setup HW retries correctly.
  USB: xhci: Check if the host controller died in IRQ handler.
  USB: xhci: Don't oops if the host doesn't halt.
  USB: xhci: Make debugging more verbose.
  USB: xhci: Correct Event Handler Busy flag usage.
  USB: xhci: Handle short control packets correctly.
  USB: xhci: Represent 64-bit addresses with one u64.
  USB: xhci: Use GFP_ATOMIC while holding spinlocks.
  USB: xhci: Deal with stalled endpoints.
  USB: xhci: Set TD size in transfer TRB.
  USB: xhci: fix less- and greater than confusion
  USB: usbtest: no need for USB_DEVICEFS
  USB: musb: fix CONFIGDATA register read issue
  ...

9 years agopty: avoid forcing 'low_latency' tty flag
OGAWA Hirofumi [Wed, 29 Jul 2009 19:15:56 +0000]
pty: avoid forcing 'low_latency' tty flag

We really don't want to mark the pty as a low-latency device, because as
Alan points out, the ->write method can be called from an IRQ (ppp?),
and that means we can't use ->low_latency=1 as we take mutexes in the
low_latency case.

So rather than using low_latency to force the written data to be pushed
to the ldisc handling at 'write()' time, just make the reader side (or
the poll function) do the flush when it checks whether there is data to
be had.

This also fixes the problem with lost data in an emacs compile buffer
(bugzilla 13815), and we can thus revert the low_latency pty hack
(commit 3a54297478e6578f96fd54bf4daa1751130aca86: "pty: quickfix for the
pty ENXIO timing problems").

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ Modified to do the tty_flush_to_ldisc() inside input_available_p() so
  that it triggers for both read and poll()  - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoPM / Hibernate: Replace bdget call with simple atomic_inc of i_count
Alan Jenkins [Wed, 29 Jul 2009 19:07:55 +0000]
PM / Hibernate: Replace bdget call with simple atomic_inc of i_count

Create bdgrab().  This function copies an existing reference to a
block_device.  It is safe to call from any context.

Hibernation code wishes to copy a reference to the active swap device.
Right now it calls bdget() under a spinlock, but this is wrong because
bdget() can sleep.  It doesn't need a full bdget() because we already
hold a reference to active swap devices (and the spinlock protects
against swapoff).

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13827

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

9 years agoPM / ACPI: HP G7000 Notebook needs a SCI_EN resume quirk
Bartlomiej Zolnierkiewicz [Wed, 29 Jul 2009 19:07:47 +0000]
PM / ACPI: HP G7000 Notebook needs a SCI_EN resume quirk

This fixes regression (battery "vanishing" on resume) introduced by
commit d0c71fe7ebc180f1b7bc7da1d39a07fc19eec768 ("ACPI Suspend: Enable
ACPI during resume if SCI_EN is not set") and also the issue with
the "screaming" IRQ 9.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13745

Reported-and-tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Cc: stable@kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Len Brown <lenb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

9 years agodrm/radeon: set fb aperture sizes for framebuffer handoff.
Dave Airlie [Wed, 29 Jul 2009 07:07:38 +0000]
drm/radeon: set fb aperture sizes for framebuffer handoff.

This will allow efi/vesa to handoff to radeon.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/ttm: fix highuser vs dma32 confusion.
Dave Airlie [Wed, 29 Jul 2009 06:56:52 +0000]
drm/ttm: fix highuser vs dma32 confusion.

DMA32 and highmem are sort of exclusive.

Noticed by AndrewR on #radeon.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon: Fix size used for benchmarking BO copies.
Michel Dänzer [Sun, 19 Jul 2009 23:44:03 +0000]
drm/radeon: Fix size used for benchmarking BO copies.

The incorrect size caused benchmark results to be inflated by a factor of 4.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon: Add radeon.test parameter for running BO GPU copy tests.
Michel Dänzer [Tue, 21 Jul 2009 09:23:57 +0000]
drm/radeon: Add radeon.test parameter for running BO GPU copy tests.

If enabled, during initialization BO GTT->VRAM and VRAM->GTT GPU copies are
tested across the whole GTT aperture.

This has helped uncover the benchmark copy size bug and verify the maximum
aperture size supported by the AGP bridge in my PowerBook.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: allow interruptible waits for objects.
Dave Airlie [Fri, 24 Jul 2009 03:47:45 +0000]
drm/radeon/kms: allow interruptible waits for objects.

Blocking here isn't something the X server mouse appreciates,
avoid the block and let userspace retry the waits.

libdrm_radeon userspace library is also expecting EBUSY not ERESTART

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/ttm: powerpc: Fix Highmem cache flushing.
Thomas Hellstrom [Fri, 24 Jul 2009 08:22:36 +0000]
drm/ttm: powerpc: Fix Highmem cache flushing.

Temporarily maps highmem pages while flushing to get a valid virtual
address to flush.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agox86: Export kmap_atomic_prot() needed for TTM.
Thomas Hellstrom [Fri, 24 Jul 2009 07:57:33 +0000]
x86: Export kmap_atomic_prot() needed for TTM.

This functionality is needed to kmap_atomic() highmem pages that may
potentially have or are about to set up other mappings with
non-standard caching attributes.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes.
Thomas Hellstrom [Fri, 24 Jul 2009 07:57:34 +0000]
drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes.

For x86 this affected highmem pages only, since they were always kmapped
cache-coherent, and this is fixed using kmap_atomic_prot().

For other architectures that may not modify the linear kernel map we
resort to vmap() for now, since kmap_atomic_prot() generally uses the
linear kernel map for lowmem pages. This of course comes with a
performance impact and should be optimized when possible.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/ttm: Fix an oops and sync object leak.
Thomas Hellstrom [Tue, 21 Jul 2009 15:45:13 +0000]
drm/ttm: Fix an oops and sync object leak.

The code was potentially dereferencig a NULL sync object pointer.
At the same time a sync object reference was potentially leaked.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: vram sizing on certain r100 chips needs workaround.
Dave Airlie [Tue, 21 Jul 2009 10:39:30 +0000]
drm/radeon/kms: vram sizing on certain r100 chips needs workaround.

If an rn50/r100/m6/m7 GPU has < 64MB RAM, i.e. 8/16/32, the
aperture used to calculate the MC_FB_LOCATION needs to be worked
out from the CONFIG_APER_SIZE register, and not the actual vram size.

TTM VRAM size was also being initialised wrong, use actual vram size
to initialise it.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon: Pay more attention to object placement requested by userspace.
Michel Dänzer [Tue, 28 Jul 2009 10:30:57 +0000]
drm/radeon: Pay more attention to object placement requested by userspace.

Previously we were basically always setting the GTT and VRAM flags regardless of
what userspace requested.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon: Fall back to evicting BOs with memcpy if necessary.
Michel Dänzer [Tue, 28 Jul 2009 10:30:56 +0000]
drm/radeon: Fall back to evicting BOs with memcpy if necessary.

Otherwise if there's no GTT space we would fail the eviction, leading to
cascaded failure.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon: Don't unreserve twice on failure to validate.
Michel Dänzer [Tue, 28 Jul 2009 10:30:55 +0000]
drm/radeon: Don't unreserve twice on failure to validate.

This is done later in radeon_object_list_unvalidate(). Doing it twice triggers
a BUG in TTM, rendering X on KMS unusable until reboot.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix bandwidth computation on avivo hardware
Jerome Glisse [Mon, 13 Jul 2009 19:04:08 +0000]
drm/radeon/kms: fix bandwidth computation on avivo hardware

Fix bandwidth computation and crtc priority in memory controller
so that crtc memory request are fullfill in time to avoid display
artifact.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add initial colortiling support.
Dave Airlie [Tue, 23 Jun 2009 23:48:08 +0000]
drm/radeon/kms: add initial colortiling support.

This adds new set/get tiling interfaces where the pitch
and macro/micro tiling enables can be set. Along with
a flag to decide if this object should have a surface when mapped.

The only thing we need to allocate with a mapped surface should be
the frontbuffer. Note rotate scanout shouldn't require one, and
back/depth shouldn't either, though mesa needs some fixes.

It fixes the TTM interfaces along Thomas's suggestions, and I've tested
the surface stealing code with two X servers and not seen any lockdep issues.

I've stopped tiling the fbcon frontbuffer, as I don't see there being
any advantage other than testing, I've left the testing commands in there,
just flip the fb_tiled to true in radeon_fb.c

Open: Can we integrate endian swapping in with this?

Future features:
texture tiling - need to relocate texture registers TXOFFSET* with tiling info.

This also merges Michel's cleanup surfaces regs at init time patch
even though it makes sense on its own, this patch really relies on it.

Some PowerMac firmwares set up a tiling surface at the beginning of VRAM
which messes us up otherwise.
that patch is:
Signed-off-by: Michel Dänzer <daenzer@vmware.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoRemove zero-length file drivers/char/vr41xx_giu.c
Jeff Garzik [Wed, 29 Jul 2009 02:36:59 +0000]
Remove zero-length file drivers/char/vr41xx_giu.c

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata: accept late unlocking of HPA
Tejun Heo [Wed, 15 Jul 2009 08:11:41 +0000]
libata: accept late unlocking of HPA

On certain configurations, HPA isn't or can't be unlocked during
probing but it somehow ends up unlocked afterwards.  In the following
thread, the problem can be reliably reproduced after resuming from
STR.  The BIOS turns on HPA during boot but forgets to do it during
resume.

  http://thread.gmane.org/gmane.linux.kernel/858310

This patch updates libata revalidation such that it considers native
n_sectors.  If the device size has increased to match native
n_sectors, it's assumed that HPA has been unlocked involuntarily and
the device is recognized as the same one.  This should be fairly safe
while nicely working around the problem.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Christof Warlich <christof@warlich.name>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata: Updates and fixes for pata_at91 driver
Sergey Matyukevich [Thu, 16 Jul 2009 18:38:55 +0000]
libata: Updates and fixes for pata_at91 driver

Please consider the following updates and fixes for pata_at91 driver.

* Removed extra headers
Here we need only static memory controller properties, which are
contained in generic header at91sam9_smc.h.
No need to include any specific headers for at91sam9260 SoC.

* No harsh BUG_ON for get_clk in set_smc_timing function
        get_clk is now performed in driver probing function,
        probing fails if master clock is not available

* Fixed uint/ulong mess in calc_mck_cycles function

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoata_piix: Add new short cable ID
Steve Conklin [Thu, 16 Jul 2009 21:31:10 +0000]
ata_piix: Add new short cable ID

OriginalAuthor: Tony Espy <espy@canonical.com>
Signed-off-by: Steve Conklin <sconklin@canonical.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoata_piix: Add new laptop short cable IDs
Steve Conklin [Thu, 16 Jul 2009 21:27:56 +0000]
ata_piix: Add new laptop short cable IDs

OriginalAuthor: Michael Frey <michael.frey@canonical.com>
Signed-off-by: Steve Conklin <sconklin@canonical.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoahci: add device IDs for Ibex Peak ahci controllers
David Milburn [Wed, 22 Jul 2009 20:15:56 +0000]
ahci: add device IDs for Ibex Peak ahci controllers

Add device IDS for Ibex Peak SATA AHCI Controllers

Signed-off-by: Jaroslav Kysela <jkysela@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata: remove superfluous NULL pointer checks
Bartlomiej Zolnierkiewicz [Sun, 26 Jul 2009 14:05:13 +0000]
libata: remove superfluous NULL pointer checks

host->ports[] always contain pointers to valid port structures since
a "dummy port" structure is used in case if there is no physical port.

This patch takes care of two entries from Dan's list:

drivers/ata/sata_sil.c +535 sil_interrupt(13) warning: variable derefenced before check 'ap'
drivers/ata/sata_mv.c +2517 mv_unexpected_intr(6) warning: variable derefenced before check 'ap'

and of another needless NULL pointer check in pata_octeon_cf.c.

Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agolibata: add missing NULL pointer check to ata_eh_reset()
Bartlomiej Zolnierkiewicz [Sun, 26 Jul 2009 14:21:01 +0000]
libata: add missing NULL pointer check to ata_eh_reset()

drivers/ata/libata-eh.c +2403 ata_eh_reset(80) warning: variable derefenced before check 'slave'

Please note that this is _not_ a real bug at the moment since ata_eh_context
structure is embedded into ata_list structure and the code alwas checks for
'slave' before accessing 'sehc'.

Anyway lets add missing check and always have a valid 'sehc' pointer (which
makes code easier to understand and prevents introducing some possible bugs
in the future).

Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agopata_pcmcia: add CNF-CDROM-ID
Wolfram Sang [Sun, 26 Jul 2009 16:27:29 +0000]
pata_pcmcia: add CNF-CDROM-ID

Fixes this report:
http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/

Reported-by: John McGrath <john@john-mcgrath.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

9 years agoUSB: xhci: Stall handling bug fixes.
Sarah Sharp [Mon, 27 Jul 2009 19:05:21 +0000]
USB: xhci: Stall handling bug fixes.

Correct the xHCI code to handle stalls on USB endpoints.  We need to move
the endpoint ring's dequeue pointer past the stalled transfer, or the HW
will try to restart the transfer the next time the doorbell is rung.

Don't attempt to clear a halt on an endpoint if we haven't seen a stalled
transfer for it.  The USB core will attempt to clear a halt on all
endpoints when it selects a new configuration.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Tue, 28 Jul 2009 21:31:13 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (asus_atk0110) Fix upper limit readings
  hwmon: (smsc47m1) Differentiate between LPC47M233 and LPC47M292

9 years agoUSB: xhci: Support for 64-byte contexts
John Youn [Mon, 27 Jul 2009 19:05:15 +0000]
USB: xhci: Support for 64-byte contexts

Adds support for controllers that use 64-byte contexts.  The following context
data structures are affected by this: Device, Input, Input Control, Endpoint,
and Slot.  To accommodate the use of either 32 or 64-byte contexts, a Device or
Input context can only be accessed through functions which look-up and return
pointers to their contained contexts.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: xhci: Always align output device contexts to 64 bytes.
Sarah Sharp [Mon, 27 Jul 2009 19:05:08 +0000]
USB: xhci: Always align output device contexts to 64 bytes.

Make sure the xHCI output device context is 64-byte aligned.  Previous
code was using the same structure for both the output device context and
the input control context.  Since the structure had 32 bytes of flags
before the device context, the output device context wouldn't be 64-byte
aligned.  Define a new structure to use for the output device context and
clean up the debugging for these two structures.

The copy of the device context in the input control context does *not*
need to be 64-byte aligned.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: xhci: Scratchpad buffer allocation
John Youn [Mon, 27 Jul 2009 19:05:03 +0000]
USB: xhci: Scratchpad buffer allocation

Allocates and initializes the scratchpad buffer array (XHCI 4.20).  This is an
array of 64-bit DMA addresses to scratch pages that the controller may use
during operation.  The number of pages is specified in the "Max Scratchpad
Buffers" field of HCSPARAMS2.  The DMA address of this array is written into
slot 0 of the DCBAA.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: Fix parsing of SuperSpeed Endpoint Companion descriptor.
Sarah Sharp [Mon, 27 Jul 2009 19:04:52 +0000]
USB: Fix parsing of SuperSpeed Endpoint Companion descriptor.

usb_parse_ss_endpoint_companion() was supposed to allocate a structure to
hold the SuperSpeed Endpoint Companion descriptor, and either copy the
values the device returned, or fill in default values if the device
descriptor did not include the companion descriptor.

However, the previous code would miss the last endpoint in a configuration
with no descriptors after it.  Make usb_parse_endpoint() allocate the SS
endpoint companion descriptor and fill it with default values, even if
we've run out of buffer space in this configuration descriptor.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: xhci: Fail gracefully if there's no SS ep companion descriptor.
Sarah Sharp [Mon, 27 Jul 2009 19:04:38 +0000]
USB: xhci: Fail gracefully if there's no SS ep companion descriptor.

This is a work around for a bug in the SuperSpeed Endpoint Companion Descriptor
parsing code.  It fails in some corner cases, which means ep->ss_ep_comp may be
NULL.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>