10 years agoclocksource: Drop unused irqaction.mask from SH drivers.
Paul Mundt [Sun, 14 Jun 2009 12:18:24 +0000]
clocksource: Drop unused irqaction.mask from SH drivers.

The irqaction.mask is legacy code that is wholly unused and going away,
so simply drop its use in the SH drivers completely.

Fixes up build failures in -next.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosh: Bump the earlytimer probe devices up.
Paul Mundt [Sun, 14 Jun 2009 11:02:30 +0000]
sh: Bump the earlytimer probe devices up.

Presently the earlytimer probe handles the clockevents driver, which
requires that the clockevents driver be registered first. This bumps it
up by 1 to include the clocksource device, which can be safely ignored
if it doesn't exist, as we will simply error out on that path and defer
to the jiffies clocksource.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosh: Use generic sched_clock().
Paul Mundt [Sun, 14 Jun 2009 10:48:48 +0000]
sh: Use generic sched_clock().

The generic sched_clock() handles INITIAL_JIFFIES now as well, so we can
just use that instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosh: Bump the earlytimer bits back to time_init().
Paul Mundt [Sun, 14 Jun 2009 10:45:40 +0000]
sh: Bump the earlytimer bits back to time_init().

These were handled through late_time_init due to kmalloc() and friends
not being available earlier on previously. Now with slab caches being
available much earlier, this is no longer necessary, and we can move the
initialization up to an earlier point. One of the benefits with this is
that printk times are available a bit earlier!

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agocpumask: Use accessors for cpu_*_mask: sh
Rusty Russell [Fri, 12 Jun 2009 13:03:14 +0000]
cpumask: Use accessors for cpu_*_mask: sh

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agocpumask: use mm_cpumask() wrapper: sh
Rusty Russell [Fri, 12 Jun 2009 13:03:14 +0000]
cpumask: use mm_cpumask() wrapper: sh

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agocpumask: arch_send_call_function_ipi_mask: sh
Rusty Russell [Fri, 12 Jun 2009 13:02:35 +0000]
cpumask: arch_send_call_function_ipi_mask: sh

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask(), and by defining
it, the old arch_send_call_function_ipi is defined by the core code.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agocpumask: remove the now-obsoleted pcibus_to_cpumask(): sh
Rusty Russell [Fri, 12 Jun 2009 13:01:04 +0000]
cpumask: remove the now-obsoleted pcibus_to_cpumask(): sh

cpumask_of_pcibus() is the new version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosh: pci: remove duplicated #include's
Huang Weiyi [Sat, 13 Jun 2009 12:21:11 +0000]
sh: pci: remove duplicated #include's

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosh: intc: alloc_bootmem() -> kzalloc() conversion.
Paul Mundt [Thu, 11 Jun 2009 22:34:12 +0000]
sh: intc: alloc_bootmem() -> kzalloc() conversion.

Now that the slab allocators are available much earlier, this triggers a
the slab_is_available() warning when registering the interrupt
controller. Convert to kzalloc() with GFP_NOWAIT, as per the generic
changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agosh: Wire up sys_perf_counter_open.
Paul Mundt [Thu, 11 Jun 2009 22:33:22 +0000]
sh: Wire up sys_perf_counter_open.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoMerge branch 'sh/ftrace' of git://github.com/mfleming/linux-2.6
Paul Mundt [Thu, 11 Jun 2009 22:12:44 +0000]
Merge branch 'sh/ftrace' of git://github.com/mfleming/linux-2.6

10 years agoMerge branch 'for-linus' of git://linux-arm.org/linux-2.6
Linus Torvalds [Thu, 11 Jun 2009 21:15:57 +0000]
Merge branch 'for-linus' of git://linux-arm.org/linux-2.6

* 'for-linus' of git://linux-arm.org/linux-2.6:
  kmemleak: Add the corresponding MAINTAINERS entry
  kmemleak: Simple testing module for kmemleak
  kmemleak: Enable the building of the memory leak detector
  kmemleak: Remove some of the kmemleak false positives
  kmemleak: Add modules support
  kmemleak: Add kmemleak_alloc callback from alloc_large_system_hash
  kmemleak: Add the vmalloc memory allocation/freeing hooks
  kmemleak: Add the slub memory allocation/freeing hooks
  kmemleak: Add the slob memory allocation/freeing hooks
  kmemleak: Add the slab memory allocation/freeing hooks
  kmemleak: Add documentation on the memory leak detector
  kmemleak: Add the base support

Manual conflict resolution (with the slab/earlyboot changes) in:
drivers/char/vt.c
init/main.c
mm/slab.c

10 years agoMerge branch 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 11 Jun 2009 21:01:07 +0000]
Merge branch 'perfcounters-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (574 commits)
  perf_counter: Turn off by default
  perf_counter: Add counter->id to the throttle event
  perf_counter: Better align code
  perf_counter: Rename L2 to LL cache
  perf_counter: Standardize event names
  perf_counter: Rename enums
  perf_counter tools: Clean up u64 usage
  perf_counter: Rename perf_counter_limit sysctl
  perf_counter: More paranoia settings
  perf_counter: powerpc: Implement generalized cache events for POWER processors
  perf_counters: powerpc: Add support for POWER7 processors
  perf_counter: Accurate period data
  perf_counter: Introduce struct for sample data
  perf_counter tools: Normalize data using per sample period data
  perf_counter: Annotate exit ctx recursion
  perf_counter tools: Propagate signals properly
  perf_counter tools: Small frequency related fixes
  perf_counter: More aggressive frequency adjustment
  perf_counter/x86: Fix the model number of Intel Core2 processors
  perf_counter, x86: Correct some event and umask values for Intel processors
  ...

10 years agoMerge branch 'topic/slab/earlyboot' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 11 Jun 2009 19:25:06 +0000]
Merge branch 'topic/slab/earlyboot' of git://git./linux/kernel/git/penberg/slab-2.6

* 'topic/slab/earlyboot' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  vgacon: use slab allocator instead of the bootmem allocator
  irq: use kcalloc() instead of the bootmem allocator
  sched: use slab in cpupri_init()
  sched: use alloc_cpumask_var() instead of alloc_bootmem_cpumask_var()
  memcg: don't use bootmem allocator in setup code
  irq/cpumask: make memoryless node zero happy
  x86: remove some alloc_bootmem_cpumask_var calling
  vt: use kzalloc() instead of the bootmem allocator
  sched: use kzalloc() instead of the bootmem allocator
  init: introduce mm_init()
  vmalloc: use kzalloc() instead of alloc_bootmem()
  slab: setup allocators earlier in the boot sequence
  bootmem: fix slab fallback on numa
  bootmem: use slab if bootmem is no longer available

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy...
Linus Torvalds [Thu, 11 Jun 2009 18:27:09 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/shaggy/jfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  jfs: Add missing mutex_unlock call to error path
  missing unlock in jfs_quota_write()

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 11 Jun 2009 18:26:56 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: memtest: use pointers of equal type for comparison

10 years agoslow_work_thread() should do the exclusive wait
Oleg Nesterov [Thu, 11 Jun 2009 12:12:55 +0000]
slow_work_thread() should do the exclusive wait

slow_work_thread() sleeps on slow_work_thread_wq without WQ_FLAG_EXCLUSIVE,
this means that slow_work_enqueue()->__wake_up(nr_exclusive => 1) wakes up all
kslowd threads.  This is not what we want, so we change slow_work_thread() to
use prepare_to_wait_exclusive() instead.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Thu, 11 Jun 2009 18:23:17 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] ata_piix: Enable parallel scan
  sata_nv: use hardreset only for post-boot probing
  [libata] ahci: Restore SB600 SATA controller 64 bit DMA
  ata_piix: Remove stale comment
  ata_piix: Turn on hotplugging support for older chips
  ahci: misc cleanups for EM stuff
  [libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2
  sata_sil: enable 32-bit PIO
  sata_sx4: speed up ECC initialization
  libata-sff: avoid byte swapping in ata_sff_data_xfer()
  [libata] ahci: use less error-prone array initializers

10 years agoMerge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Thu, 11 Jun 2009 17:52:27 +0000]
Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block

* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
  block: add request clone interface (v2)
  floppy: fix hibernation
  ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
  fs/bio.c: add missing __user annotation
  block: prevent possible io_context->refcount overflow
  Add serial number support for virtio_blk, V4a
  block: Add missing bounce_pfn stacking and fix comments
  Revert "block: Fix bounce limit setting in DM"
  cciss: decode unit attention in SCSI error handling code
  cciss: Remove no longer needed sendcmd reject processing code
  cciss: change SCSI error handling routines to work with interrupts enabled.
  cciss: separate error processing and command retrying code in sendcmd_withirq_core()
  cciss: factor out fix target status processing code from sendcmd functions
  cciss: simplify interface of sendcmd() and sendcmd_withirq()
  cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
  cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
  block: needs to set the residual length of a bidi request
  Revert "block: implement blkdev_readpages"
  block: Fix bounce limit setting in DM
  Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
  ...

Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c

10 years agosh: Fix dynamic ftrace's NOP action.
Matt Fleming [Wed, 10 Jun 2009 21:07:53 +0000]
sh: Fix dynamic ftrace's NOP action.

Ftrace on sh handles nop'ing out trace function calls differently than
other architectures. Instead of inserting NOP instructions in place of
the call to the function tracer we branch over the call instructions
and continue executing the main body of the function.

This patch fixes a bug in the implementation of ftrace_modify_code()
where we check that the old value of the code we're about to replace
is an expected one. In the ftrace_make_call() code path
ftrace_modify_code() was comparing the old instruction value with NOP
instructions. The compare was failing because we never actually insert
NOP instructions. It makes sense to just get rid of the NOP
instructions in ftrace_nop and compare the old code with the address
of the function body if we're expecting ftrace to have nop'd out the
function trace call.

Signed-off-by: Matt Fleming <matt@console-pimps.org>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Thu, 11 Jun 2009 17:36:12 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (25 commits)
  GFS2: Merge gfs2_get_sb into gfs2_get_sb_meta
  GFS2: Fix cache coherency between truncate and O_DIRECT read
  GFS2: Fix locking issue mounting gfs2meta fs
  GFS2: Remove unused variable
  GFS2: smbd proccess hangs with flock() call.
  GFS2: Remove args subdir from gfs2 sysfs files
  GFS2: Remove lockstruct subdir from gfs2 sysfs files
  GFS2: Move gfs2_unlink_ok into ops_inode.c
  GFS2: Move gfs2_readlinki into ops_inode.c
  GFS2: Move gfs2_rmdiri into ops_inode.c
  GFS2: Merge mount.c and ops_super.c into super.c
  GFS2: Clean up some file names
  GFS2: Be more aggressive in reclaiming unlinked inodes
  GFS2: Add a rgrp bitmap full flag
  GFS2: Improve resource group error handling
  GFS2: Don't warn when delete inode fails on ro filesystem
  GFS2: Update docs
  GFS2: Umount recovery race fix
  GFS2: Remove a couple of unused sysfs entries
  GFS2: Add commit= mount option
  ...

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Linus Torvalds [Thu, 11 Jun 2009 17:33:36 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (26 commits)
  amd64_edac: add MAINTAINERS entry
  EDAC: do not enable modules by default
  amd64_edac: do not enable module by default
  amd64_edac: add module registration routines
  amd64_edac: add ECC reporting initializers
  amd64_edac: add EDAC core-related initializers
  amd64_edac: add error decoding logic
  amd64_edac: add ECC chipkill syndrome mapping table
  amd64_edac: add per-family descriptors
  amd64_edac: add F10h-and-later methods-p3
  amd64_edac: add F10h-and-later methods-p2
  amd64_edac: add F10h-and-later methods-p1
  amd64_edac: add k8-specific methods
  amd64_edac: assign DRAM chip select base and mask in a family-specific way
  amd64_edac: add helper to dump relevant registers
  amd64_edac: add DRAM address type conversion facilities
  amd64_edac: add functionality to compute the DRAM hole
  amd64_edac: add sys addr to memory controller mapping helpers
  amd64_edac: add memory scrubber interface
  amd64_edac: add MCA error types
  ...

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Thu, 11 Jun 2009 17:08:33 +0000]
Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (266 commits)
  sh: Tie sparseirq in to Kconfig.
  sh: Wire up sys_rt_tgsigqueueinfo.
  sh: Fix sys_pwritev() syscall table entry for sh32.
  sh: Fix sh4a llsc-based cmpxchg()
  sh: sh7724: Add JPU support
  sh: sh7724: INTC setting update
  sh: sh7722 clock framework rewrite
  sh: sh7366 clock framework rewrite
  sh: sh7343 clock framework rewrite
  sh: sh7724 clock framework rewrite V3
  sh: sh7723 clock framework rewrite V2
  sh: add enable()/disable()/set_rate() to div6 code
  sh: add AP325RXA mode pin configuration
  sh: add Migo-R mode pin configuration
  sh: sh7722 mode pin definitions
  sh: sh7724 mode pin comments
  sh: sh7723 mode pin V2
  sh: rework mode pin code
  sh: clock div6 helper code
  sh: clock div4 frequency table offset fix
  ...

10 years agoMerge branch 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 11 Jun 2009 17:03:30 +0000]
Merge branch 'kvm-updates/2.6.31' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (138 commits)
  KVM: Prevent overflow in largepages calculation
  KVM: Disable large pages on misaligned memory slots
  KVM: Add VT-x machine check support
  KVM: VMX: Rename rmode.active to rmode.vm86_active
  KVM: Move "exit due to NMI" handling into vmx_complete_interrupts()
  KVM: Disable CR8 intercept if tpr patching is active
  KVM: Do not migrate pending software interrupts.
  KVM: inject NMI after IRET from a previous NMI, not before.
  KVM: Always request IRQ/NMI window if an interrupt is pending
  KVM: Do not re-execute INTn instruction.
  KVM: skip_emulated_instruction() decode instruction if size is not known
  KVM: Remove irq_pending bitmap
  KVM: Do not allow interrupt injection from userspace if there is a pending event.
  KVM: Unprotect a page if #PF happens during NMI injection.
  KVM: s390: Verify memory in kvm run
  KVM: s390: Sanity check on validity intercept
  KVM: s390: Unlink vcpu on destroy - v2
  KVM: s390: optimize float int lock: spin_lock_bh --> spin_lock
  KVM: s390: use hrtimer for clock wakeup from idle - v2
  KVM: s390: Fix memory slot versus run - v3
  ...

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Thu, 11 Jun 2009 17:02:46 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: remove never-used in6_addr option
  cifs: add addr= mount option alias for ip=
  [CIFS] Add mention of new mount parm (forceuid) to cifs readme
  cifs: make overriding of ownership conditional on new mount options
  cifs: fix IPv6 address length check
  cifs: clean up set_cifs_acl interfaces
  cifs: reorganize get_cifs_acl
  [CIFS] Update readme to indicate change to default mount (serverino)
  cifs: make serverino the default when mounting
  cifs: rename cifs_iget to cifs_root_iget
  cifs: make cnvrtDosUnixTm take a little-endian args and an offset
  cifs: have cifs_NTtimeToUnix take a little-endian arg
  cifs: tighten up default file_mode/dir_mode
  cifs: fix artificial limit on reading symlinks

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 11 Jun 2009 17:01:41 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (44 commits)
  nommu: Provide mmap_min_addr definition.
  TOMOYO: Add description of lists and structures.
  TOMOYO: Remove unused field.
  integrity: ima audit dentry_open failure
  TOMOYO: Remove unused parameter.
  security: use mmap_min_addr indepedently of security models
  TOMOYO: Simplify policy reader.
  TOMOYO: Remove redundant markers.
  SELinux: define audit permissions for audit tree netlink messages
  TOMOYO: Remove unused mutex.
  tomoyo: avoid get+put of task_struct
  smack: Remove redundant initialization.
  integrity: nfsd imbalance bug fix
  rootplug: Remove redundant initialization.
  smack: do not beyond ARRAY_SIZE of data
  integrity: move ima_counts_get
  integrity: path_check update
  IMA: Add __init notation to ima functions
  IMA: Minimal IMA policy and boot param for TCB IMA policy
  selinux: remove obsolete read buffer limit from sel_read_bool
  ...

10 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Thu, 11 Jun 2009 17:00:50 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (49 commits)
  ext4: Avoid corrupting the uninitialized bit in the extent during truncate
  ext4: Don't treat a truncation of a zero-length file as replace-via-truncate
  ext4: fix dx_map_entry to support 256k directory blocks
  ext4: truncate the file properly if we fail to copy data from userspace
  ext4: Avoid leaking blocks after a block allocation failure
  ext4: Change all super.c messages to print the device
  ext4: Get rid of EXTEND_DISKSIZE flag of ext4_get_blocks_handle()
  ext4: super.c whitespace cleanup
  jbd2: Fix minor typos in comments in fs/jbd2/journal.c
  ext4: Clean up calls to ext4_get_group_desc()
  ext4: remove unused function __ext4_write_dirty_metadata
  ext2: Fix memory leak in ext2_fill_super() in case of a failed mount
  ext3: Fix memory leak in ext3_fill_super() in case of a failed mount
  ext4: Fix memory leak in ext4_fill_super() in case of a failed mount
  ext4: down i_data_sem only for read when walking tree for fiemap
  ext4: Add a comprehensive block validity check to ext4_get_blocks()
  ext4: Clean up ext4_get_blocks() so it does not depend on bh_result->b_state
  ext4: Merge ext4_da_get_block_write() into mpage_da_map_blocks()
  ext4: Add BUG_ON debugging checks to noalloc_get_block_write()
  ext4: Add documentation to the ext4_*get_block* functions
  ...

10 years agoMerge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Thu, 11 Jun 2009 17:00:03 +0000]
Merge branch 'for-2.6.31' of git://git./linux/kernel/git/bart/ide-2.6

* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (28 commits)
  ide-tape: fix debug call
  alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
  ide-dma: don't reset request fields on dma_timeout_retry()
  ide: drop rq->data handling from ide_map_sg()
  ide-atapi: kill unused fields and callbacks
  ide-tape: simplify read/write functions
  ide-tape: use byte size instead of sectors on rw issue functions
  ide-tape: unify r/w init paths
  ide-tape: kill idetape_bh
  ide-tape: use standard data transfer mechanism
  ide-tape: use single continuous buffer
  ide-atapi,tape,floppy: allow ->pc_callback() to change rq->data_len
  ide-tape,floppy: fix failed command completion after request sense
  ide-pm: don't abuse rq->data
  ide-cd,atapi: use bio for internal commands
  ide-atapi: convert ide-{floppy,tape} to using preallocated sense buffer
  ide-cd: convert to using generic sense request
  ide: add helpers for preparing sense requests
  ide-cd: don't abuse rq->buffer
  ide-atapi: don't abuse rq->buffer
  ...

10 years agovgacon: use slab allocator instead of the bootmem allocator
Pekka Enberg [Thu, 11 Jun 2009 16:25:37 +0000]
vgacon: use slab allocator instead of the bootmem allocator

Slab is initialized before the console subsystem so use the slab allocator in
vgacon_scrollback_startup().

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agoirq: use kcalloc() instead of the bootmem allocator
Pekka Enberg [Thu, 11 Jun 2009 11:46:49 +0000]
irq: use kcalloc() instead of the bootmem allocator

Fixes the following problem:

[    0.000000] Experimental hierarchical RCU init done.
[    0.000000] NR_IRQS:4352 nr_irqs:256
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x40/0x7e()
[    0.000000] Hardware name: To Be Filled By O.E.M.
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #59709
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff823f8c8e>] ? alloc_arch_preferred_bootmem+0x40/0x7e
[    0.000000]  [<ffffffff81067168>] warn_slowpath_common+0x88/0xcb
[    0.000000]  [<ffffffff810671d2>] warn_slowpath_null+0x27/0x3d
[    0.000000]  [<ffffffff823f8c8e>] alloc_arch_preferred_bootmem+0x40/0x7e
[    0.000000]  [<ffffffff823f9307>] ___alloc_bootmem_nopanic+0x4e/0xec
[    0.000000]  [<ffffffff823f93c5>] ___alloc_bootmem+0x20/0x61
[    0.000000]  [<ffffffff823f962e>] __alloc_bootmem+0x1e/0x34
[    0.000000]  [<ffffffff823f757c>] early_irq_init+0x6d/0x118
[    0.000000]  [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[    0.000000]  [<ffffffff823e0cf7>] start_kernel+0x192/0x394
[    0.000000]  [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[    0.000000]  [<ffffffff823e02ad>] x86_64_start_reservations+0xb4/0xcf
[    0.000000]  [<ffffffff823e0000>] ? __init_begin+0x0/0x140
[    0.000000]  [<ffffffff823e0420>] x86_64_start_kernel+0x158/0x17b
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2002.510 MHz processor.
[    0.004000] Console: colour VGA+ 80x25

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agosched: use slab in cpupri_init()
Pekka Enberg [Thu, 11 Jun 2009 05:41:22 +0000]
sched: use slab in cpupri_init()

Lets not use the bootmem allocator in cpupri_init() as slab is already up when
it is run.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agosched: use alloc_cpumask_var() instead of alloc_bootmem_cpumask_var()
Pekka Enberg [Thu, 11 Jun 2009 05:35:27 +0000]
sched: use alloc_cpumask_var() instead of alloc_bootmem_cpumask_var()

Slab is initialized when sched_init() runs now so lets use alloc_cpumask_var().

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agomemcg: don't use bootmem allocator in setup code
Yinghai Lu [Fri, 29 May 2009 01:15:16 +0000]
memcg: don't use bootmem allocator in setup code

The bootmem allocator is no longer available for page_cgroup_init() because we
set up the kernel slab allocator much earlier now.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agoirq/cpumask: make memoryless node zero happy
Yinghai Lu [Fri, 29 May 2009 01:14:40 +0000]
irq/cpumask: make memoryless node zero happy

Don't hardcode to node zero for early boot IRQ setup memory allocations.

[ penberg@cs.helsinki.fi: minor cleanups ]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agox86: remove some alloc_bootmem_cpumask_var calling
Yinghai Lu [Mon, 25 May 2009 12:10:58 +0000]
x86: remove some alloc_bootmem_cpumask_var calling

Now that we set up the slab allocator earlier, we can get rid of some
alloc_bootmem_cpumask_var() calls in boot code.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agovt: use kzalloc() instead of the bootmem allocator
Pekka Enberg [Wed, 10 Jun 2009 20:53:37 +0000]
vt: use kzalloc() instead of the bootmem allocator

Now that kmem_cache_init() happens before console_init(), we should use
kzalloc() and not the bootmem allocator.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agosched: use kzalloc() instead of the bootmem allocator
Pekka Enberg [Wed, 10 Jun 2009 20:42:36 +0000]
sched: use kzalloc() instead of the bootmem allocator

Now that kmem_cache_init() happens before sched_init(), we should use kzalloc()
and not the bootmem allocator.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agoinit: introduce mm_init()
Pekka Enberg [Thu, 11 Jun 2009 15:29:06 +0000]
init: introduce mm_init()

As suggested by Christoph Lameter, introduce mm_init() now that we initialize
all the kernel memory allocations together.

Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agovmalloc: use kzalloc() instead of alloc_bootmem()
Pekka Enberg [Mon, 25 May 2009 12:01:35 +0000]
vmalloc: use kzalloc() instead of alloc_bootmem()

We can call vmalloc_init() after kmem_cache_init() and use kzalloc() instead of
the bootmem allocator when initializing vmalloc data structures.

Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agoslab: setup allocators earlier in the boot sequence
Pekka Enberg [Wed, 10 Jun 2009 16:40:04 +0000]
slab: setup allocators earlier in the boot sequence

This patch makes kmalloc() available earlier in the boot sequence so we can get
rid of some bootmem allocations. The bulk of the changes are due to
kmem_cache_init() being called with interrupts disabled which requires some
changes to allocator boostrap code.

Note: 32-bit x86 does WP protect test in mem_init() so we must setup traps
before we call mem_init() during boot as reported by Ingo Molnar:

  We have a hard crash in the WP-protect code:

  [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...BUG: Int 14: CR2 ffcff000
  [    0.000000]      EDI 00000188  ESI 00000ac7  EBP c17eaf9c  ESP c17eaf8c
  [    0.000000]      EBX 000014e0  EDX 0000000e  ECX 01856067  EAX 00000001
  [    0.000000]      err 00000003  EIP c10135b1   CS 00000060  flg 00010002
  [    0.000000] Stack: c17eafa8 c17fd410 c16747bc c17eafc4 c17fd7e5 000011fd f8616000 c18237cc
  [    0.000000]        00099800 c17bb000 c17eafec c17f1668 000001c5 c17f1322 c166e039 c1822bf0
  [    0.000000]        c166e033 c153a014 c18237cc 00020800 c17eaff8 c17f106a 00020800 01ba5003
  [    0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #52203
  [    0.000000] Call Trace:
  [    0.000000]  [<c15357c2>] ? printk+0x14/0x16
  [    0.000000]  [<c10135b1>] ? do_test_wp_bit+0x19/0x23
  [    0.000000]  [<c17fd410>] ? test_wp_bit+0x26/0x64
  [    0.000000]  [<c17fd7e5>] ? mem_init+0x1ba/0x1d8
  [    0.000000]  [<c17f1668>] ? start_kernel+0x164/0x2f7
  [    0.000000]  [<c17f1322>] ? unknown_bootoption+0x0/0x19c
  [    0.000000]  [<c17f106a>] ? __init_begin+0x6a/0x6f

Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agobootmem: fix slab fallback on numa
Pekka Enberg [Thu, 11 Jun 2009 05:10:28 +0000]
bootmem: fix slab fallback on numa

If the user requested bootmem allocation on a specific node, we should use
kzalloc_node() for the fallback allocation.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agobootmem: use slab if bootmem is no longer available
Pekka Enberg [Wed, 10 Jun 2009 17:05:53 +0000]
bootmem: use slab if bootmem is no longer available

As a preparation for initializing the slab allocator early, make sure the
bootmem allocator does not crash and burn if someone calls it after slab is up;
otherwise we'd need a flag day for switching to early slab.

Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agokmemleak: Add the corresponding MAINTAINERS entry
Catalin Marinas [Thu, 11 Jun 2009 12:24:14 +0000]
kmemleak: Add the corresponding MAINTAINERS entry

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Simple testing module for kmemleak
Catalin Marinas [Thu, 11 Jun 2009 12:24:14 +0000]
kmemleak: Simple testing module for kmemleak

This patch adds a loadable module that deliberately leaks memory. It
is used for testing various memory leaking scenarios.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Enable the building of the memory leak detector
Catalin Marinas [Thu, 11 Jun 2009 12:24:13 +0000]
kmemleak: Enable the building of the memory leak detector

This patch adds the Kconfig.debug and Makefile entries needed for
building kmemleak into the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Remove some of the kmemleak false positives
Catalin Marinas [Thu, 11 Jun 2009 12:24:13 +0000]
kmemleak: Remove some of the kmemleak false positives

There are allocations for which the main pointer cannot be found but
they are not memory leaks. This patch fixes some of them. For more
information on false positives, see Documentation/kmemleak.txt.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Add modules support
Catalin Marinas [Thu, 11 Jun 2009 12:23:20 +0000]
kmemleak: Add modules support

This patch handles the kmemleak operations needed for modules loading so
that memory allocations from inside a module are properly tracked.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Add kmemleak_alloc callback from alloc_large_system_hash
Catalin Marinas [Thu, 11 Jun 2009 12:23:19 +0000]
kmemleak: Add kmemleak_alloc callback from alloc_large_system_hash

The alloc_large_system_hash function is called from various places in
the kernel and it contains pointers to other allocated structures. It
therefore needs to be traced by kmemleak.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Add the vmalloc memory allocation/freeing hooks
Catalin Marinas [Thu, 11 Jun 2009 12:23:19 +0000]
kmemleak: Add the vmalloc memory allocation/freeing hooks

This patch adds the callbacks to kmemleak_(alloc|free) functions from
vmalloc/vfree.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Add the slub memory allocation/freeing hooks
Catalin Marinas [Thu, 11 Jun 2009 12:23:18 +0000]
kmemleak: Add the slub memory allocation/freeing hooks

This patch adds the callbacks to kmemleak_(alloc|free) functions from the
slub allocator.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agokmemleak: Add the slob memory allocation/freeing hooks
Catalin Marinas [Thu, 11 Jun 2009 12:23:17 +0000]
kmemleak: Add the slob memory allocation/freeing hooks

This patch adds the callbacks to kmemleak_(alloc|free) functions from the
slob allocator.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agokmemleak: Add the slab memory allocation/freeing hooks
Catalin Marinas [Thu, 11 Jun 2009 12:22:40 +0000]
kmemleak: Add the slab memory allocation/freeing hooks

This patch adds the callbacks to kmemleak_(alloc|free) functions from
the slab allocator. The patch also adds the SLAB_NOLEAKTRACE flag to
avoid recursive calls to kmemleak when it allocates its own data
structures.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>

10 years agokmemleak: Add documentation on the memory leak detector
Catalin Marinas [Thu, 11 Jun 2009 12:22:39 +0000]
kmemleak: Add documentation on the memory leak detector

This patch adds the Documentation/kmemleak.txt file with some
information about how kmemleak works.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

10 years agokmemleak: Add the base support
Catalin Marinas [Thu, 11 Jun 2009 12:22:39 +0000]
kmemleak: Add the base support

This patch adds the base support for the kernel memory leak
detector. It traces the memory allocation/freeing in a way similar to
the Boehm's conservative garbage collector, the difference being that
the unreferenced objects are not freed but only shown in
/sys/kernel/debug/kmemleak. Enabling this feature introduces an
overhead to memory allocations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

10 years agoMerge branches 'frv' and 'mn10300'
Linus Torvalds [Thu, 11 Jun 2009 16:02:31 +0000]
Merge branches 'frv' and 'mn10300'

* frv:
  FRV: Implement new-style ptrace
  FRV: Don't turn on TIF_SYSCALL_TRACE unconditionally in syscall prologue
  FRV: Implement TIF_NOTIFY_RESUME
  FRV: Remove in-kernel strace code
  FRV: BUG to BUG_ON changes
  FRV: bitops: Change the bitmap index from int to unsigned long

* mn10300:
  MN10300: Add utrace/tracehooks support
  MN10300: Don't set the dirty bit in the DTLB entries in the TLB-miss handler

10 years agoMN10300: Add utrace/tracehooks support
David Howells [Thu, 11 Jun 2009 12:08:37 +0000]
MN10300: Add utrace/tracehooks support

Add utrace/tracehooks support to MN10300.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMN10300: Don't set the dirty bit in the DTLB entries in the TLB-miss handler
David Howells [Thu, 11 Jun 2009 12:08:32 +0000]
MN10300: Don't set the dirty bit in the DTLB entries in the TLB-miss handler

Remove the special handling for the Data TLB entry dirty bit in the TLB-miss
handler.  As the code stands, all that it does is to cause us to take a second
data address exception to set the dirty bit.  Instead, we can just let
pte_mkdirty() set the bit.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFRV: Implement new-style ptrace
David Howells [Thu, 11 Jun 2009 12:05:24 +0000]
FRV: Implement new-style ptrace

Implement the new-style ptrace for FRV, including adding appropriate
tracehooks.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFRV: Don't turn on TIF_SYSCALL_TRACE unconditionally in syscall prologue
David Howells [Thu, 11 Jun 2009 12:05:19 +0000]
FRV: Don't turn on TIF_SYSCALL_TRACE unconditionally in syscall prologue

Don't turn on TIF_SYSCALL_TRACE unconditionally in syscall prologue in FRV's
entry.S.  This was originally for debugging stuff and should have been removed
a long time ago.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFRV: Implement TIF_NOTIFY_RESUME
David Howells [Thu, 11 Jun 2009 12:05:14 +0000]
FRV: Implement TIF_NOTIFY_RESUME

Implement the TIF_NOTIFY_RESUME thread flag, making it call do_notify_resume()
which then clears it.  This will be made use of later by tracehooks in the
new-style ptrace implementation

Also discard TIF_IRET as that's not used by FRV.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFRV: Remove in-kernel strace code
David Howells [Thu, 11 Jun 2009 12:05:09 +0000]
FRV: Remove in-kernel strace code

Remove in-kernel strace code from the FRV arch as it's not really needed any
more.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFRV: BUG to BUG_ON changes
Stoyan Gaydarov [Thu, 11 Jun 2009 12:05:04 +0000]
FRV: BUG to BUG_ON changes

Change some BUG()'s to BUG_ON()'s.

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFRV: bitops: Change the bitmap index from int to unsigned long
Justin Chen [Thu, 11 Jun 2009 12:04:59 +0000]
FRV: bitops: Change the bitmap index from int to unsigned long

Change the index to unsigned long in all bitops for [frv]

Signed-off-by: Justin Chen <justin.chen@hp.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'serial-from-alan'
Linus Torvalds [Thu, 11 Jun 2009 15:57:47 +0000]
Merge branch 'serial-from-alan'

* serial-from-alan: (79 commits)
  moxa: prevent opening unavailable ports
  imx: serial: use tty_encode_baud_rate to set true rate
  imx: serial: add IrDA support to serial driver
  imx: serial: use rational library function
  lib: isolate rational fractions helper function
  imx: serial: handle initialisation failure correctly
  imx: serial: be sure to stop xmit upon shutdown
  imx: serial: notify higher layers in case xmit IRQ was not called
  imx: serial: fix one bit field type
  imx: serial: fix whitespaces (no changes in functionality)
  tty: use prepare/finish_wait
  tty: remove sleep_on
  sierra: driver interface blacklisting
  sierra: driver urb handling improvements
  tty: resolve some sierra breakage
  timbuart: Fix the termios logic
  serial: Added Timberdale UART driver
  tty: Add URL for ttydev queue
  devpts: unregister the file system on error
  tty: Untangle termios and mm mutex dependencies
  ...

10 years agoMerge branch 'linus' into perfcounters/core
Ingo Molnar [Thu, 11 Jun 2009 15:55:42 +0000]
Merge branch 'linus' into perfcounters/core

Conflicts:
arch/x86/kernel/irqinit.c
arch/x86/kernel/irqinit_64.c
arch/x86/kernel/traps.c
arch/x86/mm/fault.c
include/linux/sched.h
kernel/exit.c

10 years agoperf_counter: Turn off by default
Ingo Molnar [Thu, 11 Jun 2009 14:13:24 +0000]
perf_counter: Turn off by default

Perfcounters were enabled by default to help testing - but now that we
are submitting it upstream, make it default-disabled.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf_counter: Add counter->id to the throttle event
Peter Zijlstra [Thu, 11 Jun 2009 12:57:55 +0000]
perf_counter: Add counter->id to the throttle event

So as to be able to distuinguish between multiple counters.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf_counter: Better align code
Ingo Molnar [Thu, 11 Jun 2009 12:44:26 +0000]
perf_counter: Better align code

Whitespace and comment bits. Also update copyrights.

[ Impact: cleanup ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>

10 years agoperf_counter: Rename L2 to LL cache
Peter Zijlstra [Thu, 11 Jun 2009 12:19:11 +0000]
perf_counter: Rename L2 to LL cache

The top (fastest) and last level (biggest) caches are the most
interesting ones, performance wise.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
[ Fixed the Nehalem LL table to LLC Reference/Miss events ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf_counter: Standardize event names
Peter Zijlstra [Thu, 11 Jun 2009 12:06:28 +0000]
perf_counter: Standardize event names

Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf_counter: Rename enums
Peter Zijlstra [Thu, 11 Jun 2009 11:19:29 +0000]
perf_counter: Rename enums

Rename the perf enums to be in the 'perf_' namespace and strictly
enumerate the ABI bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agomoxa: prevent opening unavailable ports
Dirk Eibach [Thu, 11 Jun 2009 13:56:44 +0000]
moxa: prevent opening unavailable ports

In moxa.c there are 32 minor numbers reserved for each device. The
number of ports actually available per device is stored in
moxa_board_conf->numPorts. This number is not considered in moxa_open().
Opening a port that is not available results in a kernel oops.
This patch adds a test to moxa_open() that prevents opening unavailable
ports.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoimx: serial: use tty_encode_baud_rate to set true rate
Oskar Schirmer [Thu, 11 Jun 2009 13:55:22 +0000]
imx: serial: use tty_encode_baud_rate to set true rate

real baud rate may be different from the one requested.
for upper layers, set the nearest value to the real rate
in favour of the rate previously requested.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoimx: serial: add IrDA support to serial driver
Fabian Godehardt [Thu, 11 Jun 2009 13:53:18 +0000]
imx: serial: add IrDA support to serial driver

Using the iMX serial driver with an IrDA device
needs extra peripheral settings and specific
timing depending on the transmitter circuitry used.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoimx: serial: use rational library function
Oskar Schirmer [Thu, 11 Jun 2009 13:52:23 +0000]
imx: serial: use rational library function

for calculation of numerator and denominator
used in baud rate setting, use generic library function
for optimum settings.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agolib: isolate rational fractions helper function
Oskar Schirmer [Thu, 11 Jun 2009 13:51:15 +0000]
lib: isolate rational fractions helper function

Provide a helper function to determine optimum numerator
denominator value pairs taking into account restricted
register size. Useful especially with PLL and other clock
configurations.

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoimx: serial: handle initialisation failure correctly
Daniel Glöckner [Thu, 11 Jun 2009 13:39:21 +0000]
imx: serial: handle initialisation failure correctly

correctly de-initialise device when setting up failed,
call to pdata->exit() was missing.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoimx: serial: be sure to stop xmit upon shutdown
Fabian Godehardt [Thu, 11 Jun 2009 13:38:38 +0000]
imx: serial: be sure to stop xmit upon shutdown

needed to avoid continued transmission by hardware
while software already shuts down, which might
cause dangling characters to show up in hardware
queues when restarting the device.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoimx: serial: notify higher layers in case xmit IRQ was not called
Fabian Godehardt [Thu, 11 Jun 2009 13:37:19 +0000]
imx: serial: notify higher layers in case xmit IRQ was not called

upper layers, namely line discipline, need to be notified
when transmission of more data is possible. For spurious
cases, where IRQ handling does not supply notification
for sure, it is given additionally here, when data has just
been transmitted and space in the buffer will most probably
be available.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoimx: serial: fix one bit field type
Daniel Glöckner [Thu, 11 Jun 2009 13:36:29 +0000]
imx: serial: fix one bit field type

"have_rtscts" is assigned 1, while it is declared
int:1, two's complement, which can hold 0 and -1
only. The code works, as the upper bits are cut
off, and tests are done against 0 only.

Nonetheless, correctly declaring the bit field
as unsigned int:1 renders the code more robust.

Signed-off-by: Daniel Glöckner <dg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoimx: serial: fix whitespaces (no changes in functionality)
Oskar Schirmer [Thu, 11 Jun 2009 13:35:01 +0000]
imx: serial: fix whitespaces (no changes in functionality)

Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: use prepare/finish_wait
Jiri Slaby [Thu, 11 Jun 2009 13:33:37 +0000]
tty: use prepare/finish_wait

Use prepare_to_wait and finish_wait instead of add_wait_queue and
remove_wait_queue.

This avoids us setting a task state.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: remove sleep_on
Jiri Slaby [Thu, 11 Jun 2009 13:32:42 +0000]
tty: remove sleep_on

Use wait_event instead of sleep_on in tty_block_til_ready.

Wait for ASYNC_CLOSING flag being 0.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosierra: driver interface blacklisting
Elina Pasheva [Thu, 11 Jun 2009 13:32:01 +0000]
sierra: driver interface blacklisting

Interface blacklisting is necessary for non-serial interfaces that are handled
by a different driver. The interface blacklisting is implemented in sierra
driver per device. Each device in need of a blacklist has a static information
array kept in the driver. This array contains the interface numbers that are
blacklisted. The pointer for each blacklist array and the length
of that blacklist are 'bundled' in data structure sierra_iface_info. A pointer
to this information is set in id_table when the device is added to the id_table.

The following is summary of changes we have made to sierra.c driver in
this patch dealing with interface blacklisting support:
- Added data structure sierra_iface_info and function is_blacklisted()
to support blacklisting
- Modified sierra_probe() to handle blacklisted interfaces accordingly
- Improved comments in id_table
- Added new device in id_table with blacklist interface support

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosierra: driver urb handling improvements
Elina Pasheva [Thu, 11 Jun 2009 13:30:21 +0000]
sierra: driver urb handling improvements

[Folded from eight patches into one as the original set according to the
 author "All of the patches need to be applied to obtain a working product"
 so keeping them split seems unhelpful

 Merge fixes done versus other conflicting changes and moved the
 spin_lock_init from open to setup time -- Alan]

Summary of the changes and code re-organization in this patch:

- The memory for urbs is allocated and urbs are submitted only for the active
  interfaces (instead of pre-allocating these for all interfaces). This will
  save memory especially in the case of using composite devices.
- The code has been re-organized and functionality has been extracted from
  sierra_startup(), sierra_shutdown(), sierra_open(), sierra_close() and added
  in helper functions sierra_release_urb(), sierra_stop_rx_urbs(),
  sierra_submit_rx_urbs() and sierra_setup_urb()

- Added function sierra_release_urb() to free an urb and its transfer
buffer.
- Removed unecessary include file reference and comment.
- Added function sierra_stop_rx_urbs() that takes care of the release of
receive and interrupt urbs. This function is to be called by sierra_close()
whenever an interface is de-activated.
- Added new function sierra_submit_rx_urbs() that handles the submission of
receive urbs and interrupt urbs (if any) during the interface activation.
This function is to be called by sierra_open(). Added a second parameter to
pass the memory allocation (as suggested by Oliver Neukum) so that this
function can be used in post_reset() and resume().
- Added new function sierra_setup_urb() that contains the functionality to
allocate an urb, fill bulk urb using the supplied memory allocation flag
and release urb upon error. Added parameter so that the caller pass the
memory allocation flag for flexibility.
- Moved sierra_close() before sierra_open() to resolve dependencies
introduced by the code reorganization.
- Modified sierra_close() to call sierra_stop_rx_urbs() and
sierra_release_urb() functions added in previous patch.
- Modified sierra_open() to call sierra_setup_urb() and sierra_submit_rx_urbs()
functions; note urbs are allocated and submitted for each activated interface.
- Modified sierra_startup() so that allocation of urbs happens whenever an
interface is activated (urb allocation is moved to sierra_open()).
- Modified sierra_shutdown() so that urbs are freed whenever an interface is
de-activated (urb freeing moved to sierra_close() as shown in previous patch
from the series)
- Removed unecessary data structure from sierra_port_private_data
- Suppress an entry in logs by not re-submitting an urb when usb_submit_urb()
returns -EPERM, as this shows that usb_kill_urb() is running (as suggested by
Oliver Neukum)

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Alan Cox <alan.cox@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: resolve some sierra breakage
Alan Cox [Thu, 11 Jun 2009 13:29:29 +0000]
tty: resolve some sierra breakage

The various merges into the sierra driver inadvertently undid
commit 212b8f0c3f5a2280bfa1d6ab13a6fe98552becaa by Elina Pasheva
<epasheva@sierrawireless.com>. Put it back so the OBEX port works again.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotimbuart: Fix the termios logic
Alan Cox [Thu, 11 Jun 2009 13:27:13 +0000]
timbuart: Fix the termios logic

The driver only handles speeds but it fails to return the current values
for the hardware features it does not support.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoserial: Added Timberdale UART driver
Richard Röjfors [Thu, 11 Jun 2009 13:05:39 +0000]
serial: Added Timberdale UART driver

Driver for the UART found in the Timberdale FPGA

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: Add URL for ttydev queue
Alan Cox [Thu, 11 Jun 2009 13:04:57 +0000]
tty: Add URL for ttydev queue

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodevpts: unregister the file system on error
Alan Cox [Thu, 11 Jun 2009 13:03:55 +0000]
devpts: unregister the file system on error

Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13429

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: Untangle termios and mm mutex dependencies
Alan Cox [Thu, 11 Jun 2009 13:03:13 +0000]
tty: Untangle termios and mm mutex dependencies

Although this doesn't cause any problems it could potentially do so for
future mmap using devices. No real work is needed to sort it out so untangle
it before it causes problems

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: bfin_jtag_comm: emulate a TTY over the Blackfin EMUDAT/JTAG interface
Mike Frysinger [Thu, 11 Jun 2009 13:01:45 +0000]
tty: bfin_jtag_comm: emulate a TTY over the Blackfin EMUDAT/JTAG interface

The Blackfin JTAG interface has a 4 byte generic data field (EMUDAT).  With
a little creative thinking, we can turn this into a TTY device.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoftdi_sio: don't override modem bits
Alan Cox [Thu, 11 Jun 2009 12:57:01 +0000]
ftdi_sio: don't override modem bits

The new open/close logic handles DTR and friends, so don't do it in our own
open routine as well.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agotty: fix bluetooth scribbling on low latency flags
Alan Cox [Thu, 11 Jun 2009 12:56:16 +0000]
tty: fix bluetooth scribbling on low latency flags

Bluetooth shouldn't be doing this as most drivers don't support the flag,
furthermore it shouldn't be needed with newer buffering. This becomes rather
more visible as the locking fixes make the abuse of low_latency visible as
spew on the users console/dmesg.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoft232: support the ASYNC_LOW_LATENCY flag
Alan Cox [Thu, 11 Jun 2009 12:55:34 +0000]
ft232: support the ASYNC_LOW_LATENCY flag

This allows users to use the standard setserial command with this FT232
feature as well as obscure chip specific interfaces we have now. We keep
track of and respect the sysfs value for non-low-latency cases. In theory we
could do smart stuff with VTIME and the like but this seems of questionable
worth.

Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9120
Signed-off-by: Alan Cox <alan@linux.intel.com)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoUSB: CP210X Replace CP2101 with CP210x
Craig Shelley [Thu, 11 Jun 2009 12:54:40 +0000]
USB: CP210X Replace CP2101 with CP210x

This patch replaces the string "CP2101" with "CP210x" within cp210x.c
This is to reduce confusion about the fact that the driver is actually
compatible with CP2101, CP2102 and CP2103 devices.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>

(Fixed some collisions merging)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoUSB: CP210X Use official request code definitions
Craig Shelley [Thu, 11 Jun 2009 12:53:30 +0000]
USB: CP210X Use official request code definitions

The CP210X driver was developed without official device specifications.
This has lead to an incorrect assumption that all GET request codes are
equal to the corresponding SET request code +1.
This patch removes this incorrect assumption, and uses request code
definitions based on the updated GPL driver from SiLabs.
This modification is needed before extended functionality such as GPIO
on CP2103 can be supported.

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoUSB: CP210X Add device IDs
Craig Shelley [Thu, 11 Jun 2009 12:52:31 +0000]
USB: CP210X Add device IDs

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoBlackfin Serial Driver: disable dma rx interrupt only rather than all irqs
Sonic Zhang [Thu, 11 Jun 2009 12:51:33 +0000]
Blackfin Serial Driver: disable dma rx interrupt only rather than all irqs

The UART RX handling code isn't exactly speeding, so don't go disabling
all interrupts when processing the buffer.  Just disable the relevant DMA
interrupt.  This greatly improves latency of the system when utilizing the
UART.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>