11 years ago[NET]: Make packet reception network namespace safe
Eric W. Biederman [Mon, 17 Sep 2007 18:53:39 +0000]
[NET]: Make packet reception network namespace safe

This patch modifies every packet receive function
registered with dev_add_pack() to drop packets if they
are not from the initial network namespace.

This should ensure that the various network stacks do
not receive packets in a anything but the initial network
namespace until the code has been converted and is ready
for them.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Initialize the network namespace of network devices.
Eric W. Biederman [Wed, 12 Sep 2007 10:57:33 +0000]
[NET]: Initialize the network namespace of network devices.

Except for carefully selected pseudo devices all network
interfaces should start out in the initial network namespace.
Ultimately it will be register_netdev that examines what
dev->nd_net is set to and places a device in a network namespace.

This patch modifies alloc_netdev to initialize the network
namespace a device is in with the initial network namespace.
This gets it right for the vast majority of devices so their
drivers need not be modified and for those few pseudo devices
that need something different they can change this parameter
before calling register_netdevice.

The network namespace parameter on a network device is not
reference counted as the devices are inside of a network namespace
and cannot remain in that namespace past the lifetime of the
network namespace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Make socket creation namespace safe.
Eric W. Biederman [Tue, 9 Oct 2007 06:24:22 +0000]
[NET]: Make socket creation namespace safe.

This patch passes in the namespace a new socket should be created in
and has the socket code do the appropriate reference counting.  By
virtue of this all socket create methods are touched.  In addition
the socket create methods are modified so that they will fail if
you attempt to create a socket in a non-default network namespace.

Failing if we attempt to create a socket outside of the default
network namespace ensures that as we incrementally make the network stack
network namespace aware we will not export functionality that someone
has not audited and made certain is network namespace safe.
Allowing us to partially enable network namespaces before all of the
exotic protocols are supported.

Any protocol layers I have missed will fail to compile because I now
pass an extra parameter into the socket creation code.

[ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ]

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Make /proc/net per network namespace
Eric W. Biederman [Wed, 12 Sep 2007 10:01:34 +0000]
[NET]: Make /proc/net per network namespace

This patch makes /proc/net per network namespace.  It modifies the global
variables proc_net and proc_net_stat to be per network namespace.
The proc_net file helpers are modified to take a network namespace argument,
and all of their callers are fixed to pass &init_net for that argument.
This ensures that all of the /proc/net files are only visible and
usable in the initial network namespace until the code behind them
has been updated to be handle multiple network namespaces.

Making /proc/net per namespace is necessary as at least some files
in /proc/net depend upon the set of network devices which is per
network namespace, and even more files in /proc/net have contents
that are relevant to a single network namespace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Add a network namespace parameter to struct sock
Eric W. Biederman [Wed, 12 Sep 2007 09:58:02 +0000]
[NET]: Add a network namespace parameter to struct sock

Sockets need to get a reference to their network namespace,
or possibly a simple hold if someone registers on the network
namespace notifier and will free the sockets when the namespace
is going to be destroyed.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Add a network namespace tag to struct net_device
Eric W. Biederman [Wed, 12 Sep 2007 09:56:32 +0000]
[NET]: Add a network namespace tag to struct net_device

Please note that network devices do not increase the count
count on the network namespace.  The are inside the network
namespace and so the network namespace tag is in the nature
of a back pointer and so getting and putting the network namespace
is unnecessary.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Add a network namespace parameter to tasks
Eric W. Biederman [Wed, 12 Sep 2007 09:55:17 +0000]
[NET]: Add a network namespace parameter to tasks

This is the network namespace from which all which all sockets
and anything else under user control ultimately get their network
namespace parameters.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Basic network namespace infrastructure.
Eric W. Biederman [Wed, 12 Sep 2007 09:50:50 +0000]
[NET]: Basic network namespace infrastructure.

This is the basic infrastructure needed to support network
namespaces.  This infrastructure is:
- Registration functions to support initializing per network
  namespace data when a network namespaces is created or destroyed.

- struct net.  The network namespace data structure.
  This structure will grow as variables are made per network
  namespace but this is the minimal starting point.

- Functions to grab a reference to the network namespace.
  I provide both get/put functions that keep a network namespace
  from being freed.  And hold/release functions serve as weak references
  and will warn if their count is not zero when the data structure
  is freed.  Useful for dealing with more complicated data structures
  like the ipv4 route cache.

- A list of all of the network namespaces so we can iterate over them.

- A slab for the network namespace data structure allowing leaks
  to be spotted.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Don't implement dev_ifname32 inline
Eric W. Biederman [Wed, 12 Sep 2007 09:37:03 +0000]
[NET]: Don't implement dev_ifname32 inline

The current implementation of dev_ifname makes maintenance difficult
because updates to the implementation of the ioctl have to made in two
places.  So this patch updates dev_ifname32 to do a classic 32/64
structure conversion and call sys_ioctl like the rest of the
compat calls do.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[ATALK]: In notifier handlers convert the void pointer to a netdevice
Eric W. Biederman [Wed, 12 Sep 2007 09:26:59 +0000]
[ATALK]: In notifier handlers convert the void pointer to a netdevice

This slightly improves code safety and clarity.

Later network namespace patches touch this code so this is a
preliminary cleanup.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM]: xfrm audit calls
Joy Latten [Mon, 17 Sep 2007 18:51:22 +0000]
[XFRM]: xfrm audit calls

This patch modifies the current ipsec audit layer
by breaking it up into purpose driven audit calls.

So far, the only audit calls made are when add/delete
an SA/policy. It had been discussed to give each
key manager it's own calls to do this, but I found
there to be much redundnacy since they did the exact
same things, except for how they got auid and sid, so I
combined them. The below audit calls can be made by any
key manager. Hopefully, this is ok.

Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: Change type of owner in sock_lock_t to int, rename
John Heffner [Wed, 12 Sep 2007 08:44:19 +0000]
[NET]: Change type of owner in sock_lock_t to int, rename

The type of owner in sock_lock_t is currently (struct sock_iocb *),
presumably for historical reasons.  It is never used as this type, only
tested as NULL or set to (void *)1.  For clarity, this changes it to type
int, and renames to owned, to avoid any possible type casting errors.

Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET] Cleanup: Use sock_owned_by_user() macro
John Heffner [Wed, 12 Sep 2007 08:42:12 +0000]
[NET] Cleanup: Use sock_owned_by_user() macro

Changes asserts in sunrpc to use sock_owned_by_user() macro instead of
referencing sock_lock.owner directly.

Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[TG3]: remove sparse warnings
Andy Gospodarek [Thu, 6 Sep 2007 19:42:14 +0000]
[TG3]: remove sparse warnings

Removed sparse warnings from tg3 driver.  The new logic seems fine (I
don't immediately see where we are running over values for any of the
variables that need to be saved).

This patch compiles fine and I'm currently using a tg3 with the patched
driver to post this patch as a basic proof of concept.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[AF_PACKET]: Don't enable global timestamps.
Stephen Hemminger [Thu, 6 Sep 2007 12:55:02 +0000]
[AF_PACKET]: Don't enable global timestamps.

Andi mentioned he did something like this already, but never submitted
it.

The dhcp client application uses AF_PACKET with a packet filter to
receive data. The application doesn't even use timestamps, but because
the AF_PACKET API has timestamps, they get turned on globally which
causes an expensive time of day lookup for every packet received on
any system that uses the standard DHCP client.

The fix is to not enable the timestamp (but use if if available).
This causes the time lookup to only occur on those packets that are
destined for the AF_PACKET socket.  The timestamping occurs after
packet filtering so all packets dropped by filtering to not cause a
clock call.

The one downside of this a a few microseconds additional delay added
from the normal timestamping location (netif_rx) until the receive
callback in AF_PACKET. But since the offset is fairly consistent it
should not upset applications that do want really use timestamps, like
wireshark.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP]: Remove unneeded pointer newdp from dccp_v4_request_recv_sock()
Micah Gruber [Wed, 5 Sep 2007 14:58:14 +0000]
[DCCP]: Remove unneeded pointer newdp from dccp_v4_request_recv_sock()

This trivial patch removes the unneeded pointer newdp, which is never used.

Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[IPV6]: Remove unneeded pointer iph from ipcomp6_input() in net/ipv6/ipcomp6.c
Micah Gruber [Wed, 5 Sep 2007 14:56:50 +0000]
[IPV6]: Remove unneeded pointer iph from ipcomp6_input() in net/ipv6/ipcomp6.c

This trivial patch removes the unneeded pointer iph, which is never used.

Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: make assoc_ap a flag
Johannes Berg [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: make assoc_ap a flag

The sta_info.assoc_ap value is used as a flag, move it
into flags.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove hostapd interface stuff
Johannes Berg [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: remove hostapd interface stuff

This removes some definitions that are used only within ioctls
that will never make it into mainline.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: improve key selection comment
Johannes Berg [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: improve key selection comment

When I changed the code there I forgot to mention what happens
with multicast frames in a regular BSS and keep wondering myself
if the code is correct. Add appropriate comments.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: filter locally-originated multicast frames
John W. Linville [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: filter locally-originated multicast frames

In STA mode, the AP will echo our traffic.  This includes multicast
traffic.

Receiving these frames confuses some protocols and applications,
notably IPv6 Duplicate Address Detection.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: clean up whitespace
Johannes Berg [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: clean up whitespace

This cleans up some whitespace to make the mac80211
version in mainline diverge less from wireless-dev.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: fix preamble setting
Johannes Berg [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: fix preamble setting

It looks like in commit 28487a90 the condition was unintentionally
negated by moving some code, fix it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Daniel Drake <dsd@gentoo.org>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: Remove overly sticky averaging filters for rssi, signal, noise
Larry Finger [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: Remove overly sticky averaging filters for rssi, signal, noise

The current version of wireless statistics contains a bug in the averaging
that makes the numbers be too sticky and not react to small changes. This
patch removes all averaging.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: add interface index to key debugfs
Johannes Berg [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: add interface index to key debugfs

Add a new file 'ifindex' to each key's debugfs dir to
allow finding which interface the key was configured on.
This isn't done as a symlink because of possible netdev
name changes.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: rework key handling
Johannes Berg [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: rework key handling

This moves all the key handling code out from ieee80211_ioctl.c
into key.c and also does the following changes including documentation
updates in mac80211.h:

 1) Turn off hardware acceleration for keys when the interface
    is down. This is necessary because otherwise monitor
    interfaces could be decrypting frames for other interfaces
    that are down at the moment. Also, it should go some way
    towards better suspend/resume support, in any case the
    routines used here could be used for that as well.
    Additionally, this makes the driver interface nicer, keys
    for a specific local MAC address are only ever present
    while an interface with that MAC address is enabled.

 2) Change driver set_key() callback interface to allow only
    return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all
    other return values. This allows debugging the stack when
    a driver notices it's handed a key while it is down.

 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE.

 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we
    want to use it, we'll use DISABLE_KEY for each key. It is
    hard to use REMOVE_ALL_KEYS because we can handle multiple
    virtual interfaces with different key configuration, so we'd
    have to keep track of a lot of state for this and that isn't
    worth it.

 5) Warn when disabling a key fails, it musn't.

 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key
    IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself.

 7) Tell driver that a (non-WEP) key is used only for transmission
    by using an all-zeroes station MAC address when configuring.

 8) Change the set_key() callback to have access to the local MAC
    address the key is being added for.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove fake set_key() call
Johannes Berg [Tue, 28 Aug 2007 21:01:55 +0000]
[MAC80211]: remove fake set_key() call

Remove adding a fake key with a NONE key algorithm for each
associated STA. If we have hardware with such TX filtering
we should probably extend the sta_table_notification()
callback with the sta information instead; the fact that
it's treated as a key for some atheros hardware shouldn't
bother the stack.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211] key handling: remove default_wep_only
Johannes Berg [Tue, 28 Aug 2007 21:01:54 +0000]
[MAC80211] key handling: remove default_wep_only

Remove the default_wep_only stuff, this wasn't really done well
and no current driver actually cares.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove krefs for keys
Johannes Berg [Tue, 28 Aug 2007 21:01:54 +0000]
[MAC80211]: remove krefs for keys

they aren't really refcounted anyway

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: embed key conf in key, fix driver interface
Johannes Berg [Tue, 28 Aug 2007 21:01:54 +0000]
[MAC80211]: embed key conf in key, fix driver interface

This patch embeds the struct ieee80211_key_conf into struct ieee80211_key
and thus avoids allocations and having data present twice.

This required some more changes:
 1) The removal of the IEEE80211_KEY_DEFAULT_TX_KEY key flag.
    This flag isn't used by drivers nor should it be since
    we have a set_key_idx() callback. Maybe that callback needs
    to be extended to include the key conf, but only a driver that
    requires it will tell.
 2) The removal of the IEEE80211_KEY_DEFAULT_WEP_ONLY key flag.
    This flag is global, so it shouldn't be passed in the key
    conf structure. Pass it to the function instead.

Also, this patch removes the AID parameter to the set_key() callback
because it is currently unused and the hardware currently cannot know
about the AID anyway. I suspect this was used with some hardware that
actually selected the AID itself, but that functionality was removed.

Additionally, I've removed the ALG_NULL key algorithm since we have
ALG_NONE.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: Remove bitfields from struct ieee80211_sub_if_data
Jiri Slaby [Tue, 28 Aug 2007 21:01:54 +0000]
[MAC80211]: Remove bitfields from struct ieee80211_sub_if_data

mac80211, remove bitfields from struct ieee80211_sub_if_data

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: Remove bitfields from struct ieee80211_if_sta
Jiri Slaby [Tue, 28 Aug 2007 21:01:54 +0000]
[MAC80211]: Remove bitfields from struct ieee80211_if_sta

mac80211, remove bitfields from struct ieee80211_if_sta

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: Remove bitfields from struct ieee80211_txrx_data
Jiri Slaby [Tue, 28 Aug 2007 21:01:54 +0000]
[MAC80211]: Remove bitfields from struct ieee80211_txrx_data

mac80211, remove bitfields from struct ieee80211_txrx_data

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: Remove bitfields from struct ieee80211_tx_packet_data
Jiri Slaby [Tue, 28 Aug 2007 21:01:54 +0000]
[MAC80211]: Remove bitfields from struct ieee80211_tx_packet_data

remove bitfields from struct ieee80211_tx_packet_data

[Johannes: completely clear flags in ieee80211_remove_tx_extra]

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: use switch statement in tx code
Johannes Berg [Tue, 28 Aug 2007 21:01:54 +0000]
[MAC80211]: use switch statement in tx code

The transmit code needs to set the addresses depending on the
interface type, a likely() for AP/VLAN is quite wrong since
most people will be using STA; convert to a switch statement
to make it look nicer.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: refactor event sending
Johannes Berg [Tue, 28 Aug 2007 21:01:53 +0000]
[MAC80211]: refactor event sending

Create a new file event.c that will contain code to send mac/mlme
events to userspace. For now put the Michael MIC failure condition
into it and remove sending of that condition via the management
interface, hostapd interestingly doesn't do anything when it gets
such a packet besides printing a message, it reacts only on the
private iwevent.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: kill key_mgmt, use key_management_enabled
Johannes Berg [Tue, 28 Aug 2007 21:01:53 +0000]
[MAC80211]: kill key_mgmt, use key_management_enabled

The key_mgmt variable for STA interfaces doesn't seem well-defined
nor do we actually use the values other than "NONE", so change it to
be named better.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove unused ioctls (3)
Johannes Berg [Tue, 28 Aug 2007 21:01:53 +0000]
[MAC80211]: remove unused ioctls (3)

The ioctls
 * PRISM2_PARAM_RADAR_DETECT
 * PRISM2_PARAM_SPECTRUM_MGMT

are not used by hostapd or wpa_supplicant,

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove unused ioctls (2)
Johannes Berg [Tue, 28 Aug 2007 21:01:53 +0000]
[MAC80211]: remove unused ioctls (2)

The ioctls

 * PRISM2_PARAM_STA_ANTENNA_SEL
 * PRISM2_PARAM_TX_POWER_REDUCTION
 * PRISM2_PARAM_DEFAULT_WEP_ONLY

are not used by hostapd or wpa_supplicant.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove unused ioctls (1)
Johannes Berg [Tue, 28 Aug 2007 21:01:53 +0000]
[MAC80211]: remove unused ioctls (1)

The ioctls

 * PRISM2_PARAM_ANTENNA_MODE
 * PRISM2_PARAM_STAT_TIME

are not used by hostapd or wpa_supplicant.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: fix software decryption
Johannes Berg [Tue, 28 Aug 2007 21:01:53 +0000]
[MAC80211]: fix software decryption

When doing key selection for software decryption, mac80211 gets
a few things wrong: it always uses pairwise keys if configured,
even if the frame is addressed to a multicast address. Also, it
doesn't allow using a key index of zero if a pairwise key has
also been found.

This patch changes the key selection code to be (more) in line
with the 802.11 specification. I have confirmed that with this,
multicast frames are correctly decrypted and I've tested with
WEP as well.

While at it, I've cleaned up the semantics of the hardware flags
IEEE80211_HW_WEP_INCLUDE_IV and IEEE80211_HW_DEVICE_HIDES_WEP
and clarified them in the mac80211.h header; it is also now
allowed to set the IEEE80211_HW_DEVICE_HIDES_WEP option even if
it only applies to frames that have been decrypted by the hw,
unencrypted frames must be dropped but encrypted frames that
the hardware couldn't handle can be passed up unmodified.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

11 years ago[MAC80211]: remove radar stuff
Johannes Berg [Tue, 28 Aug 2007 21:01:53 +0000]
[MAC80211]: remove radar stuff

Unused in drivers, userspace and mac80211.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove ieee80211_msg_wep_frame_unknown_key
Johannes Berg [Tue, 28 Aug 2007 21:01:53 +0000]
[MAC80211]: remove ieee80211_msg_wep_frame_unknown_key

Neither hostapd nor wpa_supplicant really use it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

11 years ago[MAC80211]: ratelimit some RX messages
Johannes Berg [Tue, 28 Aug 2007 21:01:52 +0000]
[MAC80211]: ratelimit some RX messages

Many if not all of these messages can be triggered by sending
a few rogue frames which is trivially done and then we overflow
our logs.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove IEEE80211_HW_DATA_NULLFUNC_ACK
Johannes Berg [Thu, 6 Sep 2007 10:36:10 +0000]
[MAC80211]: remove IEEE80211_HW_DATA_NULLFUNC_ACK

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove PRISM2_PARAM_RADIO_ENABLED
Johannes Berg [Tue, 28 Aug 2007 21:01:52 +0000]
[MAC80211]: remove PRISM2_PARAM_RADIO_ENABLED

This now is unused in hostapd/wpa_supplicant.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove IEEE80211_HW_HOST_GEN_BEACON flag
Johannes Berg [Tue, 28 Aug 2007 21:01:52 +0000]
[MAC80211]: remove IEEE80211_HW_HOST_GEN_BEACON flag

The flag is never checked because drivers can simply call
ieee80211_beacon_get() regardless of setting this flag.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: remove reset callback
Johannes Berg [Tue, 28 Aug 2007 21:01:52 +0000]
[MAC80211]: remove reset callback

The callback isn't used so remove it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: fix key debugfs
Johannes Berg [Tue, 28 Aug 2007 21:01:52 +0000]
[MAC80211]: fix key debugfs

This fixes two issues with the key debugfs:
 1) key index obviously isn't unique
 2) various missing break statements led to bogus output

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[MAC80211]: avoid copying packets to interfaces that are down
Johannes Berg [Tue, 28 Aug 2007 21:01:52 +0000]
[MAC80211]: avoid copying packets to interfaces that are down

David Woodhouse noticed that under some circumstances the number of slab
allocations kept growing. After looking a bit, this seemed to happen
when you had a management mode interface that was *down*.

The reason for this is that when the device is down, all management
frames get queued to the in-kernel MLME (via ieee80211_sta_rx_mgmt) but
then the sta work is invoked but doesn't run when the netif is down.
When you then bring the interface up, all such frames are freed, but if
you change the mode all of them are lost because the skb queue is
reinitialised as soon as you go back to managed mode. The skb queue is
correctly cleared when the interface is brought down, but the code
doesn't account for the fact that it may be filled while it is not up.

This patch should fix the issue by simply ignoring all interfaces that
are down when going through the RX handlers.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[IrDA]: Kingsun KS-959 IrDA USB driver
Alex Villacís Lasso [Tue, 28 Aug 2007 22:58:31 +0000]
[IrDA]: Kingsun KS-959 IrDA USB driver

This dongle does not follow the usb-irda specification, so it needs its own
special driver. First, it uses control URBs for data transfer, instead of
bulk or interrupt transfers; the only interrupt endpoint exposed seems to
be a dummy to prevent the interface from being rejected. Second, it uses
obfuscation and padding at the USB traffic level, for no apparent reason
other than to make reverse engineering harder (full details on obfuscation
in comments at beginning of source). Although it is advertised as a "4 Mbps
FIR dongle", it apparently loses packets at speeds greater than 57600 bps.

On plugin, this dongle reports vendor and device IDs: 0x07d0:0x4959 .

The Windows driver that is used normally to control this dongle has a
filename of KS-959.SYS .

Signed-off-by: Alex Villacís Lasso <a_villacis@palosanto.com>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[IrDA]: Kingsun Dazzle IrDA USB driver
Alex Villacís Lasso [Tue, 28 Aug 2007 22:57:50 +0000]
[IrDA]: Kingsun Dazzle IrDA USB driver

This dongle does not follow the usb-irda specification, so it needs its own
special driver. Just like the Kingsun/Donshine dongle, it exposes two
interrupt endpoints. Reception is performed through direct reads from the
input endpoint. Transmission requires splitting the IrDA frames into 8-byte
segments, in which the first byte encodes how many of the remaining 7 bytes
are used as data. Speed change is made with a control URB just like the one
in cypress_m8, and it seems to support up to 115200 bps.

On plugin, this dongle reports vendor and device IDs: 0x07d0:0x4100

Signed-off-by: Alex Villacís Lasso <a_villacis@palosanto.com>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[IrDA]: MSG_NOSIGNAL support for IrDA sockets
Samuel Ortiz [Tue, 28 Aug 2007 22:57:12 +0000]
[IrDA]: MSG_NOSIGNAL support for IrDA sockets

Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET]: DIV_ROUND_UP cleanup (part two)
Ilpo Järvinen [Tue, 28 Aug 2007 22:50:33 +0000]
[NET]: DIV_ROUND_UP cleanup (part two)

Hopefully captured all single statement cases under net/. I'm
not too sure if there is some policy about #includes that are
"guaranteed" (ie., in the current tree) to be available through
some other #included header, so I just added linux/kernel.h to
each changed file that didn't #include it previously.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[SOFTIRQ]: Remove do_softirq() symbol export.
Robert Olsson [Mon, 17 Sep 2007 18:47:12 +0000]
[SOFTIRQ]: Remove do_softirq() symbol export.

As noted by Christoph Hellwig, pktgen was the only user so
it can now be removed.

[ Add missing cases caught by Adrian Bunk. -DaveM ]

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[PKTGEN]: Remove softirq scheduling.
Robert Olsson [Tue, 28 Aug 2007 22:46:58 +0000]
[PKTGEN]: Remove softirq scheduling.

It's not a job for pktgen.

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[PKTGEN]: Multiqueue support.
Robert Olsson [Tue, 28 Aug 2007 22:45:55 +0000]
[PKTGEN]: Multiqueue support.

Below some pktgen support to send into different TX queues.
This can of course be feed into input queues on other machines

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NETLINK]: use container_of instead
Denis Cheng [Tue, 28 Aug 2007 22:41:11 +0000]
[NETLINK]: use container_of instead

This could make future redesign of struct netlink_sock easier.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] policy: Replace magic number with XFRM_POLICY_OUT
Thomas Graf [Sat, 25 Aug 2007 20:46:55 +0000]
[XFRM] policy: Replace magic number with XFRM_POLICY_OUT

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[IPV4] IPSEC: Omit redirect for tunnelled packet.
Masahide NAKAMURA [Sat, 25 Aug 2007 06:33:01 +0000]
[IPV4] IPSEC: Omit redirect for tunnelled packet.

IPv4 IPsec tunnel gateway incorrectly sends redirect to
sender if it is onlink host when network device the IPsec tunnelled
packet is arrived is the same as the one the decapsulated packet
is sent.

With this patch, it omits to send the redirect when the forwarding
skbuff carries secpath, since such skbuff should be assumed as
a decapsulated packet from IPsec tunnel by own.

Request for comments:
Alternatively we'd have another way to change net/ipv4/route.c
(__mkroute_input) to use RTCF_DOREDIRECT flag unless skbuff
has no secpath. It is better than this patch at performance
point of view because IPv4 redirect judgement is done at
routing slow-path. However, it should be taken care of resource
changes between SAD(XFRM states) and routing table. In other words,
When IPv4 SAD is changed does the related routing entry go to its
slow-path? If not, it is reasonable to apply this patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[IPV6] IPSEC: Omit redirect for tunnelled packet.
Masahide NAKAMURA [Fri, 24 Aug 2007 10:08:55 +0000]
[IPV6] IPSEC: Omit redirect for tunnelled packet.

IPv6 IPsec tunnel gateway incorrectly sends redirect to
router or sender when network device the IPsec tunnelled packet
is arrived is the same as the one the decapsulated packet
is sent.

With this patch, it omits to send the redirect when the forwarding
skbuff carries secpath, since such skbuff should be assumed as
a decapsulated packet from IPsec tunnel by own.

It may be a rare case for an IPsec security gateway, however
it is not rare when the gateway is MIPv6 Home Agent since
the another tunnel end-point is Mobile Node and it changes
the attached network.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[IPV6] XFRM: Fix connected socket to use transformation.
Noriaki TAKAMIYA [Thu, 6 Sep 2007 10:31:25 +0000]
[IPV6] XFRM: Fix connected socket to use transformation.

When XFRM policy and state are ready after TCP connection is started,
the traffic should be transformed immediately, however it does not
on IPv6 TCP.

It depends on a dst cache replacement policy with connected socket.
It seems that the replacement is always done for IPv4, however, on
IPv6 case it is done only when routing cookie is changed.

This patch fix that non-transformation dst can be changed to
transformation one.
This behavior is required by MIPv6 and improves IPv6 IPsec.

Fixes by Masahide NAKAMURA.

Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[IPV6]: Add v4mapped address inline
Brian Haley [Sat, 25 Aug 2007 06:16:08 +0000]
[IPV6]: Add v4mapped address inline

Add v4mapped address inline to avoid calls to ipv6_addr_type().

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[SHAPER]: Mark for removal.
Stephen Hemminger [Mon, 17 Sep 2007 18:44:25 +0000]
[SHAPER]: Mark for removal.

This driver has been marked obsolete for a long time and
is superseded by traffic schedulers.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[UDP]: Randomize port selection.
Stephen Hemminger [Sat, 25 Aug 2007 06:09:41 +0000]
[UDP]: Randomize port selection.

This patch causes UDP port allocation to be randomized like TCP.
The earlier code would always choose same port (ie first empty list).

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET] Cleanup: DIV_ROUND_UP
Ilpo Järvinen [Sat, 25 Aug 2007 06:00:31 +0000]
[NET] Cleanup: DIV_ROUND_UP

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[TCP] MIB: Add counters for discarded SACK blocks
Ilpo Järvinen [Sat, 25 Aug 2007 05:55:52 +0000]
[TCP] MIB: Add counters for discarded SACK blocks

In DSACK case, some events are not extraordinary, such as packet
duplication generated DSACK. They can arrive easily below
snd_una when undo_marker is not set (TCP being in CA_Open),
counting such DSACKs amoung SACK discards will likely just
mislead if they occur in some scenario when there are other
problems as well. Similarly, excessively delayed packets could
cause "normal" DSACKs. Therefore, separate counters are
allocated for DSACK events.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[TCP]: Discard fuzzy SACK blocks
Ilpo Järvinen [Sat, 25 Aug 2007 05:54:44 +0000]
[TCP]: Discard fuzzy SACK blocks

SACK processing code has been a sort of russian roulette as no
validation of SACK blocks is previously attempted. Besides, it
is not very clear what all kinds of broken SACK blocks really
mean (e.g., one that has start and end sequence numbers
reversed). So now close the roulette once and for all.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[TCP]: Rename tcp_ack_packets_out -> tcp_rearm_rto
Ilpo Järvinen [Sat, 25 Aug 2007 05:53:26 +0000]
[TCP]: Rename tcp_ack_packets_out -> tcp_rearm_rto

Only thing that tiny function does is rearming the RTO (if
necessary), name it accordingly.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[TCP]: tcp_packets_out_inc to tcp_output.c (no callers elsewhere)
Ilpo Järvinen [Sat, 25 Aug 2007 05:44:06 +0000]
[TCP]: tcp_packets_out_inc to tcp_output.c (no callers elsewhere)

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[TCP]: Remove unnecessary wrapper tcp_packets_out_dec
Ilpo Järvinen [Sat, 25 Aug 2007 05:43:14 +0000]
[TCP]: Remove unnecessary wrapper tcp_packets_out_dec

Makes caller side more obvious, there's no need to have
a wrapper for this oneliner!

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[ATM]: Replace DPRINTK() with pr_debug().
Stephen Hemminger [Tue, 28 Aug 2007 22:22:09 +0000]
[ATM]: Replace DPRINTK() with pr_debug().

Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h).
Using the standard macro is cleaner and forces code to check for bad arguments
and formatting.

Fixes from Thomas Graf.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[NET] ethernet: optimize memcpy and memset
Stephen Hemminger [Sat, 25 Aug 2007 05:35:44 +0000]
[NET] ethernet: optimize memcpy and memset

The ethernet header management only needs to handle a fixed
size address (6 bytes). If the memcpy/memset are changed to
be passed a constant length, then compiler can optimize for
this case (and if it is smart eliminate string instructions).

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Inline attach_encap_tmpl(), attach_sec_ctx(), and attach_one_addr()
Thomas Graf [Thu, 6 Sep 2007 10:28:08 +0000]
[XFRM] netlink: Inline attach_encap_tmpl(), attach_sec_ctx(), and attach_one_addr()

These functions are only used once and are a lot easier to understand if
inlined directly into the function.

Fixes by Masahide NAKAMURA.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Remove dependency on rtnetlink
Thomas Graf [Wed, 22 Aug 2007 21:02:39 +0000]
[XFRM] netlink: Remove dependency on rtnetlink

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Use nlattr instead of rtattr
Thomas Graf [Wed, 22 Aug 2007 21:01:33 +0000]
[XFRM] netlink: Use nlattr instead of rtattr

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Rename attribute array from xfrma[] to attrs[]
Thomas Graf [Wed, 22 Aug 2007 21:00:40 +0000]
[XFRM] netlink: Rename attribute array from xfrma[] to attrs[]

Increases readability a lot.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Enhance indexing of the attribute array
Thomas Graf [Wed, 22 Aug 2007 20:59:43 +0000]
[XFRM] netlink: Enhance indexing of the attribute array

nlmsg_parse() puts attributes at array[type] so the indexing
method can be simpilfied by removing the obscuring "- 1".

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Establish an attribute policy
Thomas Graf [Wed, 22 Aug 2007 20:59:04 +0000]
[XFRM] netlink: Establish an attribute policy

Adds a policy defining the minimal payload lengths for all the attributes
allowing for most attribute validation checks to be removed from in
the middle of the code path. Makes updates more consistent as many format
errors are recognised earlier, before any changes have been attempted.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Use nlmsg_parse() to parse attributes
Thomas Graf [Wed, 22 Aug 2007 20:58:18 +0000]
[XFRM] netlink: Use nlmsg_parse() to parse attributes

Uses nlmsg_parse() to parse the attributes. This actually changes
behaviour as unknown attributes (type > MAXTYPE) no longer cause
an error. Instead unknown attributes will be ignored henceforth
to keep older kernels compatible with more recent userspace tools.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Use nlmsg_new() and type-safe size calculation helpers
Thomas Graf [Wed, 22 Aug 2007 20:57:39 +0000]
[XFRM] netlink: Use nlmsg_new() and type-safe size calculation helpers

Moves all complex message size calculation into own inlined helper
functions and makes use of the type-safe netlink interface.

Using nlmsg_new() simplifies the calculation itself as it takes care
of the netlink header length by itself.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Clear up some of the CONFIG_XFRM_SUB_POLICY ifdef mess
Thomas Graf [Wed, 22 Aug 2007 20:57:04 +0000]
[XFRM] netlink: Clear up some of the CONFIG_XFRM_SUB_POLICY ifdef mess

Moves all of the SUB_POLICY ifdefs related to the attribute size
calculation into a function.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Move algorithm length calculation to its own function
Thomas Graf [Wed, 22 Aug 2007 20:56:23 +0000]
[XFRM] netlink: Move algorithm length calculation to its own function

Adds alg_len() to calculate the properly padded length of an
algorithm attribute to simplify the code.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Use nla_put()/NLA_PUT() variantes
Thomas Graf [Wed, 22 Aug 2007 20:55:43 +0000]
[XFRM] netlink: Use nla_put()/NLA_PUT() variantes

Also makes use of copy_sec_ctx() in another place and removes
duplicated code.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Use nlmsg_broadcast() and nlmsg_unicast()
Thomas Graf [Wed, 22 Aug 2007 20:54:36 +0000]
[XFRM] netlink: Use nlmsg_broadcast() and nlmsg_unicast()

This simplifies successful return codes from >0 to 0.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Use nlmsg_data() instead of NLMSG_DATA()
Thomas Graf [Wed, 22 Aug 2007 20:53:52 +0000]
[XFRM] netlink: Use nlmsg_data() instead of NLMSG_DATA()

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Use nlmsg_end() and nlmsg_cancel()
Thomas Graf [Wed, 22 Aug 2007 19:47:26 +0000]
[XFRM] netlink: Use nlmsg_end() and nlmsg_cancel()

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[XFRM] netlink: Use nlmsg_put() instead of NLMSG_PUT()
Thomas Graf [Wed, 22 Aug 2007 19:46:53 +0000]
[XFRM] netlink: Use nlmsg_put() instead of NLMSG_PUT()

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP]: Nuke the timeval helpers now that we fully converted to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:19:44 +0000]
[DCCP]: Nuke the timeval helpers now that we fully converted to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP]: Nuke dccp_timestamp and dccps_epoch, not used anymore
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:19:21 +0000]
[DCCP]: Nuke dccp_timestamp and dccps_epoch, not used anymore

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP] options: convert dccp_insert_option_timestamp to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:18:55 +0000]
[DCCP] options: convert dccp_insert_option_timestamp to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP]: Convert dccps_timestamp_time to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:18:33 +0000]
[DCCP]: Convert dccps_timestamp_time to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP] packet_history: Convert dccphtx_tstamp to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:18:13 +0000]
[DCCP] packet_history: Convert dccphtx_tstamp to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP] packet_history: convert dccphrx_tstamp to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:17:51 +0000]
[DCCP] packet_history: convert dccphrx_tstamp to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP] ackvec: Convert to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:17:25 +0000]
[DCCP] ackvec: Convert to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP] CCID3: Stop using dccp_timestamp
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:17:02 +0000]
[DCCP] CCID3: Stop using dccp_timestamp

Now to convert the ackvec code to ktime_t so that we can get rid of
dccp_timestamp and the epoch thing in dccp_sock.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP]: Convert dccp_sample_rtt to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:16:35 +0000]
[DCCP]: Convert dccp_sample_rtt to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[KTIME]: Introduce ktime_sub_ns and ktime_sub_us
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:16:05 +0000]
[KTIME]: Introduce ktime_sub_ns and ktime_sub_us

First user will be the DCCP transport networking protocol.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP]: Convert ccid3hcrx_tstamp_last_feedback to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:15:37 +0000]
[DCCP]: Convert ccid3hcrx_tstamp_last_feedback to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years ago[DCCP]: Convert ccid3hcrx_tstamp_last_ack to ktime_t
Arnaldo Carvalho de Melo [Mon, 20 Aug 2007 00:15:13 +0000]
[DCCP]: Convert ccid3hcrx_tstamp_last_ack to ktime_t

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>