12 years ago[DCCP]: Update contact details and copyright
Ian McDonald [Sun, 27 Aug 2006 02:01:30 +0000]
[DCCP]: Update contact details and copyright

Just updating copyright and contacts

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[DCCP]: Fix typo
Ian McDonald [Sun, 27 Aug 2006 02:01:03 +0000]
[DCCP]: Fix typo

This fixes a small typo in net/dccp/libs/packet_history.c

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6]: Segmentation offload not set correctly on TCP children
Stephen Hemminger [Fri, 25 Aug 2006 22:55:43 +0000]
[IPV6]: Segmentation offload not set correctly on TCP children

TCP over IPV6 would incorrectly inherit the GSO settings.
This would cause kernel to send Tcp Segmentation Offload packets for
IPV6 data to devices that can't handle it. It caused the sky2 driver
to lock http://bugzilla.kernel.org/show_bug.cgi?id=7050
and the e1000 would generate bogus packets. I can't blame the
hardware for gagging if the upper layers feed it garbage.

This was a new bug in 2.6.18 introduced with GSO support.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[CONNECTOR]: Add userspace example code into Documentation/connector/
Evgeniy Polyakov [Fri, 25 Aug 2006 07:52:06 +0000]
[CONNECTOR]: Add userspace example code into Documentation/connector/

I was asked several times to include userspace example code into
Documentation, so if there is no policy against it, consider attached patch
for 2.6.18. This program works with included Documentation/connector/cn_test.c
connector module.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[PATCH] unusual_devs update for UCR-61S2B
Alan Stern [Mon, 14 Aug 2006 15:40:46 +0000]
[PATCH] unusual_devs update for UCR-61S2B

The existing unusual_devs entry for the UCR-61S2B appears to have too
wide a revision range.  It matches at least one device that doesn't
respond to the initialization sequence.  Perhaps the sequence needs to
be updated, or perhaps something else can be done.  For now, this patch
(as764) restricts the range to include only the revision mentioned in
the original comment.

This resolves (for now!) Bugzilla entry #6950.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cable
Tomasz Kazmierczak [Fri, 18 Aug 2006 21:43:29 +0000]
[PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cable

This patch removes support for a clone of Nokia DKU-5 cable made by Ours
Technology Inc, as it turned out that the cable does not use the pl2303
chip, but OTI-6858 chip which is not compatible with the pl2303.

Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] USB: fix bug in cypress_cy7c63.c driver
Greg Kroah-Hartman [Tue, 15 Aug 2006 00:32:51 +0000]
[PATCH] USB: fix bug in cypress_cy7c63.c driver

This was pointed out by Adrian Bunk <bunk@stusta.de>, as found by the Coverity Checker.

Cc: Adrian Bunk <bunk@stusta.de>
Cc: Oliver Bock <o.bock@fh-wolfenbuettel.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] PCI: kerneldoc correction in pci-driver
Henrik Kretzschmar [Tue, 15 Aug 2006 08:57:16 +0000]
[PATCH] PCI: kerneldoc correction in pci-driver

Removes an unused kerneldoc entry from pci_match_device and
put the others into correct order.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] CPCI hotplug: fix resource assignment
Scott Murray [Tue, 22 Aug 2006 23:55:57 +0000]
[PATCH] CPCI hotplug: fix resource assignment

Here is a patch against the CPCI hotplug core to fix up PCI resource
assignment such that things will actually work when a hot inserted
device is enabled.  I mentioned this patch to you way back in April at
ELC, but am only now out from under things enough to clean it up and
submit it.  I've basically cribbed the corresponding code from
shpchp_pci.c, so there are no big surprises.  If it's still possible, I
wouldn't mind this going into 2.6.18, but it wouldn't be the end of the
world if it went into 2.6.19.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] PCI: fix ICH6 quirks
Daniel Ritz [Tue, 22 Aug 2006 14:29:10 +0000]
[PATCH] PCI: fix ICH6 quirks

- add the ICH6(R) LPC to the ICH6 ACPI quirks.  currently only the ICH6-M
  is handled.  [ PCI_DEVICE_ID_INTEL_ICH6_1 is the ICH6-M LPC, ICH6_0 is
  the ICH6(R) ]

- remove the wrong quirk calling asus_hides_smbus_lpc() for ICH6.  the
  register modified in asus_hides_smbus_lpc() has a different meaning in
  ICH6.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] PCI: i386 mmconfig: don't forget bus number when setting fallback_slots bits
Daniel Ritz [Tue, 22 Aug 2006 14:29:09 +0000]
[PATCH] PCI: i386 mmconfig: don't forget bus number when setting fallback_slots bits

On i386 PCI mmconfig forgets the bus number when setting the fallback_slots
bits which means fallback to conf1 only works for bus 0.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] PCI: use PCBIOS as last fallback
Daniel Ritz [Tue, 22 Aug 2006 14:29:08 +0000]
[PATCH] PCI: use PCBIOS as last fallback

there was a change in 2.6.17 which affected the order in which the PCI
access methods are probed.  this gives regressions on some machines with
broken BIOS.  the problem is that PCBIOS sometimes reports last bus wrong,
leaving cardbus non-funcational.  previously those system worked fine with
direct access.

The patch changes the PCI init code to have PCBIOS as last fallback, yet
the PCBIOS code still has to run first to set pcibios_last_bus to the value
reported by the BIOS.  this is needed in case legacy PCI probing
(arch/i386/pci/legacy.c) is used to detect peer busses.  using direct
access if available fixes the cardbus problems.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] hwmon: abituguru timeout fixes
Hans de Goede [Fri, 25 Aug 2006 08:24:20 +0000]
[PATCH] hwmon: abituguru timeout fixes

This patch contains 2 sets of fixes for the abituguru:
 1) Much improved timeout handling, drasticly reducing the amount of
    timeout errors on some motherboards
 2) Fix the exit paths in the bank1 sensor type detect code to always
    restore the original settings even on an error. Without this our
    special test settings could remain seriously confusing the system
    BIOS's setup menu.

Both are very much related and are must haves, to avoid messing up the
uguru CMOS settings.

Detailed changes:
- Much improved timeout / wait for status handling. Many thanks to Sunil
  Kumar, for all his testing, ideas and patches! The code now first busy
  waits, polling the uguru for the expected status as this usually
  succeeds pretty quickly (within 90 reads). To avoid unnecessary CPU burn
  in timeout conditions, the amount of busy waiting has been halved from
  previous versions (120 tries instead of 250). This is not a problem,
  because this version goes to sleep after 120 attemps for 1 jiffy and
  then tries again, it does this sleep and try again 5 times before
  finally giving up. This (almost?) completly removes the timeout errors
  some people have seen regulary. Apparently some older uguru versions
  sometimes are distracted for a (relatively) long time. This solves this.
- These timeout errors not only occur in the sending address part of
  reading the uguru but also in the wait for read state, so errors in
  this state are now handled as retryable just like send address state
  errors and are only logged and reported to userspace if 3 executive
  tries fail.
- Fix a very nasty bug in the bank1 sensor type detection code, where it
  would not restore the original settings in any of the error paths!
- Since not successfully restoring the original settings can seriously
  confuse the system BIOS (hang when entering the relevant setup menu),
  we now try restoring them 3 times before giving up.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] i2c: tps65010 build fixes
David Brownell [Fri, 11 Aug 2006 20:53:08 +0000]
[PATCH] i2c: tps65010 build fixes

The tps65010.c driver in the main tree never got updated with
build fixes since the last batch of I2C driver changes; and the
genirq trigger flags were updated wierdly too.

This also includes a minor tweak to reduce the frequency used to
poll for unplug-the-AC-power on the TPS chips that don't provide
relevant IRQs.  It _would_ be nice to sense whether there's even
a battery, but that'd normally be an HDQ/1-wire interface to a
smart battery, and such APIs aren't standardized.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoMerge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Greg Kroah-Hartman [Sat, 26 Aug 2006 20:04:23 +0000]
Merge gregkh@/linux/kernel/git/jejb/scsi-rc-fixes-2.6

12 years ago[SCSI] fix scsi_send_eh_cmnd regression
Mike Christie [Sat, 26 Aug 2006 07:00:22 +0000]
[SCSI] fix scsi_send_eh_cmnd regression

The callers of scsi_send_eh_cmnd are setting the cmnd buffer,
and then scsi_send_eh_cmnd is copying that updated buffer to
the old_cmnd variable. Then after the command runs, we end up
copying that old_cmnd var which has the new cmnd to the scsi
command buffer. When this command gets recent, all types of fun
things happen like getting TUR or START_STOP commands with
data and scatterlists.

This patch made against scsi-rc-fixes, has the callers of
scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd
can do the right thing. This should go into 2.6.18 since this
fixes a regression added when we removed some of the scsi_cmnd
fields and replaced them with local variables.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla2xxx: Update version number to 8.01.07-k1.
Andrew Vasquez [Wed, 23 Aug 2006 21:54:56 +0000]
[SCSI] qla2xxx: Update version number to 8.01.07-k1.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort.
Andrew Vasquez [Wed, 23 Aug 2006 21:54:55 +0000]
[SCSI] qla2xxx: Properly re-enable EFT support after an ISP abort.

Software must explicitely re-enable extended firmware tracing
after any ISP abort condition.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla2xxx: Correct PLOGI retry logic.
Andrew Vasquez [Wed, 23 Aug 2006 21:54:54 +0000]
[SCSI] qla2xxx: Correct PLOGI retry logic.

Original code attempts to retry PLOGIs to fcports that are
FCP_TARGETs only.  If the driver never performed a successful
PLOGI/PRLI, the port-type would never be assigned, and the
relogin logic would silently drop the request (and thus the port
would not be recognized and registered).

The fix is relatively straightforward, drop the FCP_TARGET-only
check.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] sg: fix incorrect page problem
Douglas Gilbert [Sat, 19 Aug 2006 04:11:34 +0000]
[SCSI] sg: fix incorrect page problem

There's a problem where sg is executing a ->nopage operation on a
compound page, it actually calls get_page() on the first page in the
compound rather than the page which is being mapped.  The fix is to
select the correct page by indexing into the compound.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years agoMerge branch 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6
Greg Kroah-Hartman [Fri, 25 Aug 2006 05:29:46 +0000]
Merge branch 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6

12 years agoVFS: Remove redundant open-coded mode bit checks in open_exec().
Trond Myklebust [Wed, 23 Aug 2006 00:06:04 +0000]
VFS: Remove redundant open-coded mode bit checks in open_exec().

The check in open_exec() for inode->i_mode & 0111 has been made
redundant by the fix to permission().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 1d3741c5d991686699f100b65b9956f7ee7ae0ae commit)

12 years agoVFS: Remove redundant open-coded mode bit check in prepare_binfmt().
Trond Myklebust [Wed, 23 Aug 2006 00:06:03 +0000]
VFS: Remove redundant open-coded mode bit check in prepare_binfmt().

The check in prepare_binfmt() for inode->i_mode & 0111 is redundant,
since open_exec() will already have done that.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 822dec482ced07af32c378cd936d77345786572b commit)

12 years agoVFS: Fix access("file", X_OK) in the presence of ACLs
Trond Myklebust [Wed, 23 Aug 2006 00:06:03 +0000]
VFS: Fix access("file", X_OK) in the presence of ACLs

Currently, the access() call will return incorrect information on NFS if
there exists an ACL that grants execute access to the user on a regular
file. The reason the information is incorrect is that the VFS overrides
this execute access in open_exec() by checking (inode->i_mode & 0111).

This patch propagates the VFS execute bit check back into the generic
permission() call.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 64cbae98848c4c99851cb0a405f0b4982cd76c1e commit)

12 years agoNFSv4: Add v4 exception handling for the ACL functions.
Trond Myklebust [Thu, 24 Aug 2006 16:27:15 +0000]
NFSv4: Add v4 exception handling for the ACL functions.

This is needed in order to handle any NFS4ERR_DELAY errors that might be
returned by the server. It also ensures that we map the NFSv4 errors before
they are returned to userland.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 71c12b3f0abc7501f6ed231a6d17bc9c05a238dc commit)

12 years agoNFS: Check lengths more thoroughly in NFS4 readdir XDR decode
David Howells [Thu, 24 Aug 2006 19:44:19 +0000]
NFS: Check lengths more thoroughly in NFS4 readdir XDR decode

Check the bounds of length specifiers more thoroughly in the XDR decoding of
NFS4 readdir reply data.

Currently, if the server returns a bitmap or attr length that causes the
current decode point pointer to wrap, this could go undetected (consider a
small "negative" length on a 32-bit machine).

Also add a check into the main XDR decode handler to make sure that the amount
of data is a multiple of four bytes (as specified by RFC-1014).  This makes
sure that we can do u32* pointer subtraction in the NFS client without risking
an undefined result (the result is undefined if the pointers are not correctly
aligned with respect to one another).

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 5861fddd64a7eaf7e8b1a9997455a24e7f688092 commit)

12 years agoNFSv4: increase client-provided nfs4 clientid size
J. Bruce Fields [Thu, 24 Aug 2006 19:44:12 +0000]
NFSv4: increase client-provided nfs4 clientid size

Neil Brown observed that the current limit of 32 bytes isn't enough to hold two
ip addresses and the rest of the stuff we're putting in it, so it's often
truncated to the point where it's unlikely to be unique.  This can cause
spurious CLID_INUSE's from the server.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from fc8c17ec251e984ab3df9182ed097aa5b577c915 commit)

12 years agoSUNRPC: avoid choosing an IPMI port for RPC traffic
Chuck Lever [Wed, 23 Aug 2006 00:06:15 +0000]
SUNRPC: avoid choosing an IPMI port for RPC traffic

Some hardware uses port 664 for its hardware-based IPMI listener.  Teach
the RPC client to avoid using that port by raising the default minimum port
number to 665.

Test plan:
Find a mainboard known to use port 664 for IPMI; enable IPMI; mount NFS
servers in a tight loop.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 58e8cb3a035d22fc386e1c53a5d98c3f219530fb commit)

12 years agoNFS: Fix issue with EIO on NFS read
Trond Myklebust [Tue, 22 Aug 2006 17:44:32 +0000]
NFS: Fix issue with EIO on NFS read

The problem is that we may be caching writes that would extend the file and
create a hole in the region that we are reading. In this case, we need to
detect the eof from the server, ensure that we zero out the pages that
are part of the hole and mark them as up to date.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 856b603b01b99146918c093969b6cb1b1b0f1c01 commit)

12 years agoLOCKD: Fix a deadlock in nlm_traverse_files()
Trond Myklebust [Thu, 10 Aug 2006 15:58:57 +0000]
LOCKD: Fix a deadlock in nlm_traverse_files()

nlm_traverse_files() is not allowed to hold the nlm_file_mutex while calling
nlm_inspect file, since it may end up calling nlm_release_file() when
releaseing the blocks.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from e558d3cde986e04f68afe8c790ad68ef4b94587a commit)

12 years agoSUNRPC: Fix dentry refcounting issues with users of rpc_pipefs
Trond Myklebust [Mon, 14 Aug 2006 17:11:15 +0000]
SUNRPC: Fix dentry refcounting issues with users of rpc_pipefs

rpc_unlink() and rpc_rmdir() will dput the dentry reference for you.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from a05a57effa71a1f67ccbfc52335c10c8b85f3f6a commit)

12 years agoSUNRPC: rpc_unlink() must check for unhashed dentries
Trond Myklebust [Thu, 10 Aug 2006 21:51:46 +0000]
SUNRPC: rpc_unlink() must check for unhashed dentries

A prior call to rpc_depopulate() by rpc_rmdir() on the parent directory may
have already called simple_unlink() on this entry.
Add the same check to rpc_rmdir(). Also remove a redundant call to
rpc_close_pipes() in rpc_rmdir.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 0bbfb9d20f6437c4031aa3bf9b4d311a053e58e3 commit)

12 years agoNFS: clean up rpc_rmdir
Trond Myklebust [Mon, 31 Jul 2006 21:17:18 +0000]
NFS: clean up rpc_rmdir

Make it take a dentry argument instead of a path

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 648d4116eb2509f010f7f34704a650150309b3e7 commit)

12 years agoSUNRPC: make rpc_unlink() take a dentry argument instead of a path
Trond Myklebust [Mon, 31 Jul 2006 21:11:48 +0000]
SUNRPC: make rpc_unlink() take a dentry argument instead of a path

Signe-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 88bf6d811b01a4be7fd507d18bf5f1c527989089 commit)

12 years agoVFS: add lookup hint for network file systems
ASANO Masahiro [Wed, 23 Aug 2006 00:06:02 +0000]
VFS: add lookup hint for network file systems

I'm trying to speeding up mkdir(2) for network file systems.  A typical
mkdir(2) calls two inode_operations: lookup and mkdir.  The lookup
operation would fail with ENOENT in common case.  I think it is unnecessary
because the subsequent mkdir operation can check it.  In case of creat(2),
lookup operation is called with the LOOKUP_CREATE flag, so individual
filesystem can omit real lookup.  e.g.  nfs_lookup().

Here is a sample patch which uses LOOKUP_CREATE and O_EXCL on mkdir,
symlink and mknod.  This uses the gadget for creat(2).

And here is the result of a benchmark on NFSv3.
  mkdir(2) 10,000 times:
    original  50.5 sec
    patched   29.0 sec

Signed-off-by: ASANO Masahiro <masano@tnes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from fab7bf44449b29f9d5572a5dd8adcf7c91d5bf0f commit)

12 years agoNFS: Fix a potential deadlock in nfs_release_page
Nikita Danilov [Wed, 9 Aug 2006 17:53:47 +0000]
NFS: Fix a potential deadlock in nfs_release_page

nfs_wb_page() waits on request completion and, as a result, is not safe to be
called from nfs_release_page() invoked by VM scanner as part of GFP_NOFS
allocation. Fix possible deadlock by analyzing gfp mask and refusing to
release page if __GFP_FS is not set.

Signed-off-by: Nikita Danilov <danilov@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 374d969debfb290bafcb41d28918dc6f7e43ce31 commit)

12 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Greg Kroah-Hartman [Thu, 24 Aug 2006 17:54:22 +0000]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

12 years ago[S390] dasd PAV enabling.
Horst Hummel [Thu, 24 Aug 2006 11:22:36 +0000]
[S390] dasd PAV enabling.

The subsystem check in the PAV code is incorrect, it enables PAV
per device instead of per subsystem.

Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years agoMerge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git...
Greg Kroah-Hartman [Thu, 24 Aug 2006 08:28:14 +0000]
Merge branch 'upstream-greg' of gregkh@/linux/kernel/git/jgarzik/libata-dev

12 years ago[PATCH] sata_via: use old SCR access pattern on vt6420
Tejun Heo [Tue, 22 Aug 2006 16:00:27 +0000]
[PATCH] sata_via: use old SCR access pattern on vt6420

vt6420 has super-fragile SCR registers which can hang the whole
machine if accessed with the wrong timings.  This patch makes sata_via
use SCR registers only during probing and with the same timings as
before (pre new EH), which is proven to work.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] ata_piix: implement force_pcs module parameter
Tejun Heo [Tue, 22 Aug 2006 12:15:58 +0000]
[PATCH] ata_piix: implement force_pcs module parameter

This patch implements force_pcs module parameter for ata_piix.  If 1,
PCS is ignored, 2 honored.  As there seem to be quite a few ICHs w/
impaired PCS, this option will be useful for cases where the default
setting doesn't work.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] ata_piix: ignore PCS on ICH5
Tejun Heo [Tue, 22 Aug 2006 12:06:46 +0000]
[PATCH] ata_piix: ignore PCS on ICH5

There have been a number of reports regarding some ICH5s failing to
detect devices since the PCS handling update.  Analysis shows that
these problems are caused by bogus PCS values from those controllers.

Before the PCS update, the driver didn't honor PCS regs exactly and
probed them in many cases PCS reports no device.  Now that PCS is
honored exactly, these hardware problems are visible.

This patch makes ICH5 ignore PCS.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoMerge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git...
Greg Kroah-Hartman [Thu, 24 Aug 2006 04:58:48 +0000]
Merge branch 'upstream-greg' of gregkh@/linux/kernel/git/jgarzik/netdev-2.6

12 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linvil...
Jeff Garzik [Thu, 24 Aug 2006 04:41:25 +0000]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream-fixes

12 years ago[PATCH] spectrum_cs: Fix firmware uploading errors
Richard Purdie [Tue, 22 Aug 2006 17:55:44 +0000]
[PATCH] spectrum_cs: Fix firmware uploading errors

spectrum_cs: Fix the logic so we error when the device is *not* present!

This fixes firmware upload failures which prevent the driver from
working (the bug is also present in 2.6.17).

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] pcnet32: break in 2.6.18-rc1 identified
Don Fry [Tue, 22 Aug 2006 17:22:37 +0000]
[PATCH] pcnet32: break in 2.6.18-rc1 identified

A change I made for 2.6.17 and another for 2.6.18 do not work on older
pcnet32 chips which I do not have access to.  If the chip is a 79C970 or
79C965, do not try and suspend or check the link status.
I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976,
and 79C978.

Signed-off-by: Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] xirc2ps_cs: Cannot reset card in atomic context
Joerg Ahrens [Sun, 20 Aug 2006 20:51:57 +0000]
[PATCH] xirc2ps_cs: Cannot reset card in atomic context

I am using a Xircom CEM33 pcmcia NIC which has occasional hardware problems.
If the netdev watchdog detects a transmit timeout, do_reset is called which
msleeps - this is illegal in atomic context.

This patch schedules the timeout handling as a workqueue item.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] Signedness issue in drivers/net/3c515.c
Eric Sesterhenn [Sat, 19 Aug 2006 17:37:57 +0000]
[PATCH] Signedness issue in drivers/net/3c515.c

while playing with gcc 4.1 -Wextra warnings, I came across this one:

drivers/net/3c515.c:1027: warning: comparison of unsigned expression >= 0 is always true

Since i is unsigned the >= 0 check in the for loop is always true,
so we might spin there forever unless the if condition triggers.
Since i is only used in this loop, this patch changes it to
an integer.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoMerge branch 'for-linus' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/dtor...
Greg Kroah-Hartman [Thu, 24 Aug 2006 04:11:56 +0000]
Merge branch 'for-linus' of gregkh@/linux/kernel/git/dtor/input

12 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Greg Kroah-Hartman [Thu, 24 Aug 2006 04:08:12 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Greg Kroah-Hartman [Thu, 24 Aug 2006 01:08:44 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

12 years ago[POWERPC] hugepage BUG fix
Adam Litke [Fri, 18 Aug 2006 18:22:21 +0000]
[POWERPC] hugepage BUG fix

On Tue, 2006-08-15 at 08:22 -0700, Dave Hansen wrote:
> kernel BUG in cache_free_debugcheck at mm/slab.c:2748!

Alright, this one is only triggered when slab debugging is enabled.  The
slabs are assumed to be aligned on a HUGEPTE_TABLE_SIZE boundary.  The free
path makes use of this assumption and uses the lowest nibble to pass around
an index into an array of kmem_cache pointers.  With slab debugging turned
on, the slab is still aligned, but the "working" object pointer is not.
This would break the assumption above that a full nibble is available for
the PGF_CACHENUM_MASK.

The following patch reduces PGF_CACHENUM_MASK to cover only the two least
significant bits, which is enough to cover the current number of 4 pgtable
cache types.  Then use this constant to mask out the appropriate part of
the huge pte pointer.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[SERIAL] sunzilog: Mirror the sunsab serial setup bug fix.
David S. Miller [Wed, 23 Aug 2006 22:53:39 +0000]
[SERIAL] sunzilog: Mirror the sunsab serial setup bug fix.

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[SERIAL] sunsab: Fix E250 console with RSC.
Marc Zyngier [Wed, 23 Aug 2006 22:50:57 +0000]
[SERIAL] sunsab: Fix E250 console with RSC.

This fixes yet another sunsab problem, when console is set to anything
but the first port. The console framework calls sunsab_console_setup
for each port, and we end up setting up a console on a not yet
discovered port, which leads to an Oops. Instead, defer console setup
until the requested port is properly initialized. Tested on an E250
through an RSC console.

Reported by Daniel Smolik <marvin@mydatex.cz>

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[SCSI] esp: Fix build on SUN4.
David S. Miller [Wed, 23 Aug 2006 22:33:07 +0000]
[SCSI] esp: Fix build on SUN4.

Noted by Alexey Dobriyan.

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoIB/mthca: Update HCA firmware revisions
Michael S. Tsirkin [Tue, 22 Aug 2006 19:45:06 +0000]
IB/mthca: Update HCA firmware revisions

Update the driver's list of HCA firmware revisions to make sure people
running Sinai firmware older than 1.1.0 get a message suggesting a
firmware upgrade.  Update the Arbel versions as well while we are at it.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

12 years ago[PATCH] hostap: Restore antenna selection settings after port reset
Pavel Roskin [Wed, 16 Aug 2006 01:41:39 +0000]
[PATCH] hostap: Restore antenna selection settings after port reset

Intersil firmware 1.7.4 (and possibly others) loses the antenna
selection settings when the port is reset.

Signed-off-by: David Acker <dacker@roinet.com>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[PATCH] spectrum_cs: Fix incorrect use of pcmcia_dev_present()
Pavel Roskin [Wed, 16 Aug 2006 00:42:20 +0000]
[PATCH] spectrum_cs: Fix incorrect use of pcmcia_dev_present()

This bug was introduced during the PCMCIA API conversion and broke
spectrum_cs completely.

Tracked down by Fredrik Tolf <fredrik@dolda2000.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

12 years ago[POWERPC] Fix compile problem without CONFIG_PCI
Li Yang [Wed, 23 Aug 2006 06:13:08 +0000]
[POWERPC] Fix compile problem without CONFIG_PCI

Compile fails without defining CONFIG_PCI.
The patch fix this.

[paulus@samba.org: Moved of_irq_pci_swizzle so we only need one #ifdef]

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Correct masks used in emulating some instructions
Paul Mackerras [Wed, 23 Aug 2006 06:58:39 +0000]
[POWERPC] Correct masks used in emulating some instructions

When we get an illegal instruction exception, we check to see whether
the instruction is one that we emulate for the user program.  Some of
the masks we use in checking whether the offending instruction is one
we care about didn't have the top bit set, which is the MSB of the
major opcode.  Thus some undefined opcodes could get emulated as other
(defined but unimplemented) instructions.  This corrects the masks.

Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Pass UPIO_TSI flag to 8259 serial driver
Zang Roy-r61911 [Wed, 23 Aug 2006 02:20:27 +0000]
[POWERPC] Pass UPIO_TSI flag to 8259 serial driver

The patch passes the UPIO_TSI flag to general 8259 serial driver

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Update mpc7448hpc2 board irq support using device tree
Zang Roy-r61911 [Wed, 23 Aug 2006 02:19:50 +0000]
[POWERPC] Update mpc7448hpc2 board irq support using device tree

The patch rewrites mpc7448hpc2 board irq support according to the new
mpic device tree interface.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Fix BootX booting with an initrd
Benjamin Herrenschmidt [Wed, 23 Aug 2006 01:45:12 +0000]
[POWERPC] Fix BootX booting with an initrd

The bootx_init.c trampoline didn't properly add the ramdisk to the
"reserve map" (list of reserved areas of memory), thus causing all sorts
of failures when using BootX with an initrd. Also fixes a possible
problem if the ramdisk is located before the device-tree passed by
BootX.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Fix gettimeofday inaccuracies
Nathan Lynch [Wed, 23 Aug 2006 01:36:05 +0000]
[POWERPC] Fix gettimeofday inaccuracies

There are two problems in the powerpc gettimeofday code which can
cause incorrect results to be returned.

The first is that there is a race between do_gettimeofday and the
timer interrupt:

1. do_gettimeofday does get_tb()

2. decrementer exception on boot cpu which runs timer_recalc_offset,
   which also samples the timebase and updates the do_gtod structure
   with a greater timebase value.

3. do_gettimeofday calls __do_gettimeofday, which leads to the
   negative result from tb_val - temp_varp->tb_orig_stamp.

The second is caused by taking the boot cpu offline, which can cause
the value of tb_last_jiffy to be increased past the currently
available timebase, causing the same underflow as above.

[paulus@samba.org - define and use data_barrier() instead of mb().]

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Fix FEC node in 8540 ADS dts
Andy Fleming [Mon, 21 Aug 2006 19:29:28 +0000]
[POWERPC] Fix FEC node in 8540 ADS dts

* Fixed the FEC node, and its accompanying PHY
* Fixed a spacing issue in the PIC node

Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Rewrite the PPC 86xx IRQ handling to use Flat Device Tree
Jon Loeliger [Fri, 18 Aug 2006 19:30:35 +0000]
[POWERPC] Rewrite the PPC 86xx IRQ handling to use Flat Device Tree

IRQ setup now comes from the Flat Device Tree and use the new generic
IRQ code.  Fixed the fsl_soc.c IRQ OF interrupt node parsing.
Removed some unused MPC86xx macro definition.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
(cherry picked from 919fede6edab94cccb3ca8c1c0b32fa62c9369a5 commit)

12 years ago[POWERPC] Add 85xx DTS files to powerpc
Andy Fleming [Fri, 18 Aug 2006 23:04:34 +0000]
[POWERPC] Add 85xx DTS files to powerpc

Added the mpc85xx family of dts files to the powerpc tree

Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Fix CDS IRQ handling and PCI code
Andy Fleming [Fri, 18 Aug 2006 01:24:48 +0000]
[POWERPC] Fix CDS IRQ handling and PCI code

* Fix IRQ support in the 85xx CDS boards so it uses the new
  generic stuff
* Fix PCI IRQ mapping to use the device tree
* Disabled i8259 support to allow the CDS to boot.  This will be
  fixed soon, but the current code doesn't even compile, so this
  is a vast improvement

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Fix interrupts on 8540 ADS board
Andy Fleming [Fri, 18 Aug 2006 23:03:08 +0000]
[POWERPC] Fix interrupts on 8540 ADS board

* Fixed 8540 ADS support for the new irq layer
* Fixed 8540 ADS support for mapping PCI interrupts
* Updated 8540 ADS to use device tree for interrupt assignment
  and sense values

Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agoInput: remove dead URLs from Doclumentation/input/joystick.txt
Alexey Dobriyan [Wed, 23 Aug 2006 04:48:33 +0000]
Input: remove dead URLs from Doclumentation/input/joystick.txt

Closes #2804.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

12 years agoInput: psmouse - fix Intellimouse 4.0 initialization
Pozsar Balazs [Wed, 23 Aug 2006 04:48:03 +0000]
Input: psmouse - fix Intellimouse 4.0 initialization

Revert the superfluous initilization causing some mice become jumpy.

Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

12 years agoInput: wistron - fix crash due to referencing __initdata
Dmitry Torokhov [Wed, 23 Aug 2006 04:47:39 +0000]
Input: wistron - fix crash due to referencing __initdata

Remove __initdata markings from keymaps as they are used during
normal driver operations.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

12 years agoInput: atkbd - fix overrun in atkbd_set_repeat_rate()
Florin Malita [Wed, 23 Aug 2006 04:45:33 +0000]
Input: atkbd - fix overrun in atkbd_set_repeat_rate()

This was introduced in commit 3d0f0fa0cb554541e10cb8cb84104e4b10828468:
bounds checking is performed against period[32] while indexing delay[4].

Spotted by Coverity, CID 1376.

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

12 years agoMerge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Greg Kroah-Hartman [Tue, 22 Aug 2006 22:12:58 +0000]
Merge gregkh@/linux/kernel/git/davem/net-2.6

12 years ago[SPARC64]: Fix pfn_pte() build failure.
David S. Miller [Mon, 21 Aug 2006 22:27:16 +0000]
[SPARC64]: Fix pfn_pte() build failure.

The "%uhi" needs to be "%%uhi" because we want a real
"%" character in the assembler here, instead of an
assembler variable expansion.

Aparently older GCCs were more liberal and interpreted
this %-letter as a literal "%" for whatever reason.

Based upon a build failure report from Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[TEXTSEARCH]: Fix Boyer Moore initialization bug
Michael Rash [Tue, 22 Aug 2006 07:45:22 +0000]
[TEXTSEARCH]: Fix Boyer Moore initialization bug

The pattern is set after trying to compute the prefix table, which tries
to use it. Initialize it before calling compute_prefix_tbl, make
compute_prefix_tbl consistently use only the data from struct ts_bm
and remove the now unnecessary arguments.

Signed-off-by: Michael Rash <mbr@cipherdyne.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[TCP]: Limit window scaling if window is clamped.
Stephen Hemminger [Tue, 22 Aug 2006 07:06:11 +0000]
[TCP]: Limit window scaling if window is clamped.

This small change allows for easy per-route workarounds for broken hosts or
middleboxes that are not compliant with TCP standards for window scaling.
Rather than having to turn off window scaling globally. This patch allows
reducing or disabling window scaling if window clamp is present.

Example: Mark Lord reported a problem with 2.6.17 kernel being unable to
access http://www.everymac.com

# ip route add 216.145.246.23/32 via 10.8.0.1 window 65535

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NETFILTER]: arp_tables: fix table locking in arpt_do_table
Patrick McHardy [Mon, 21 Aug 2006 22:31:08 +0000]
[NETFILTER]: arp_tables: fix table locking in arpt_do_table

table->private might change because of ruleset changes, don't use it
without holding the lock.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoelv_unregister: fix possible crash on module unload
Oleg Nesterov [Tue, 22 Aug 2006 17:22:13 +0000]
elv_unregister: fix possible crash on module unload

An exiting task or process which didn't do I/O yet have no io context,
elv_unregister() should check it is not NULL.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoFix possible UDF deadlock and memory corruption (CVE-2006-4145)
Jan Kara [Tue, 15 Aug 2006 11:56:26 +0000]
Fix possible UDF deadlock and memory corruption (CVE-2006-4145)

UDF code is not really ready to handle extents larger that 1GB. This is
the easy way to forbid creating those.

Also truncation code did not count with the case when there are no
extents in the file and we are extending the file.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoFix sctp privilege elevation (CVE-2006-3745)
Sridhar Samudrala [Tue, 22 Aug 2006 18:50:39 +0000]
Fix sctp privilege elevation (CVE-2006-3745)

sctp_make_abort_user() now takes the msg_len along with the msg
so that we don't have to recalculate the bytes in iovec.
It also uses memcpy_fromiovec() so that we don't go beyond the
length allocated.

It is good to have this fix even if verify_iovec() is fixed to
return error on overflow.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years ago[PATCH] ata_piix: fix ghost device probing by honoring PCS present bits
Tejun Heo [Sun, 20 Aug 2006 08:56:38 +0000]
[PATCH] ata_piix: fix ghost device probing by honoring PCS present bits

Move out PCS handling from piix_sata_prereset() into
piix_sata_present_mask() and use it from newly implemented
piix_sata_softreset().  Class codes for devices which are indicated to
be absent by PCS are cleared to ATA_DEV_NONE.  This fixes ghost device
problem reported on ICH6 and 7.

This patch moves PCS handling from prereset to softreset, which makes
two behavior changes.

* perform softreset even when PCS indicates no device
* PCS handling is repeated before retrying softresets due to reset
  failures.

Both behavior changes are intended and more consistent with how other
drivers behave.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoMerge gregkh@master.kernel.org:/home/rmk/linux-2.6-arm
Greg Kroah-Hartman [Mon, 21 Aug 2006 21:38:51 +0000]
Merge gregkh@kernel.org:/home/rmk/linux-2.6-arm

12 years agoMerge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
Greg Kroah-Hartman [Mon, 21 Aug 2006 17:24:02 +0000]
Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

12 years ago[PATCH] cfq_cic_link: fix usage of wrong cfq_io_context
Oleg Nesterov [Mon, 21 Aug 2006 06:36:12 +0000]
[PATCH] cfq_cic_link: fix usage of wrong cfq_io_context

Obviously, cfq_cic_link() shouldn't free a just allocated cfq_io_context?
The dead key is from __cic, so drop that.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@suse.de>

12 years ago[PATCH] uninline ioprio_best()
Oleg Nesterov [Mon, 21 Aug 2006 08:02:50 +0000]
[PATCH] uninline ioprio_best()

Saves 376 bytes (5 callers) for me.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@suse.de>

12 years ago[PATCH] Fix current_io_context() vs set_task_ioprio() race
Oleg Nesterov [Mon, 21 Aug 2006 06:34:15 +0000]
[PATCH] Fix current_io_context() vs set_task_ioprio() race

I know nothing about io scheduler, but I suspect set_task_ioprio() is not safe.

current_io_context() initializes "struct io_context", then sets ->io_context.
set_task_ioprio() running on another cpu may see the changes out of order, so
->set_ioprio(ioc) may use io_context which was not initialized properly.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@suse.de>

12 years ago[PATCH] sys_ioprio_set: minor do_each_thread+break fix
Oleg Nesterov [Mon, 21 Aug 2006 06:33:23 +0000]
[PATCH] sys_ioprio_set: minor do_each_thread+break fix

From include/linux/sched.h:

         * Careful: do_each_thread/while_each_thread is a double loop so
         *          'break' will not work as expected - use goto instead.
         */

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jens Axboe <axboe@suse.de>

12 years agoMerge trivial low-risk suspend hotkey bugzilla-5918 into release
Len Brown [Mon, 21 Aug 2006 01:49:29 +0000]
Merge trivial low-risk suspend hotkey bugzilla-5918 into release

12 years ago[PATCH] WAN: fix C101 card carrier handling
Krzysztof Halasa [Tue, 15 Aug 2006 23:52:23 +0000]
[PATCH] WAN: fix C101 card carrier handling

Hi,

One of my recent changes broke C101 carrier handling, this patch
fixes it. Also fixes an old TX underrun checking bug.

2.6.18 material. Please apply.
Thanks.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] ppc32: board-specific part of fs_enet update
Vitaly Bordug [Tue, 15 Aug 2006 06:00:31 +0000]
[PATCH] ppc32: board-specific part of fs_enet update

This contains board-specific portion to respect driver changes (for 8272ads ,
885ads and 866ads).  Altered platform_data structures as well as initial setup
routines relevant to fs_enet.

Changes to the mpc8560ads ppc/ code are also introduced, but mainly as
reference, since the entire board support is going to appear in arch/powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] FS_ENET: use PAL for mii management
Vitaly Bordug [Tue, 15 Aug 2006 06:00:30 +0000]
[PATCH] FS_ENET: use PAL for mii management

This patch should update the fs_enet infrastructure to utilize Phy Abstraction
Layer subsystem.  Along with the above, there are apparent bugfixes, overhaul
and improvements.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] PAL: Support of the fixed PHY
Vitaly Bordug [Tue, 15 Aug 2006 06:00:29 +0000]
[PATCH] PAL: Support of the fixed PHY

This makes it possible for HW PHY-less boards to utilize PAL goodies.  Generic
routines to connect to fixed PHY are provided, as well as ability to specify
software callback that fills up link, speed, etc.  information into PHY
descriptor (the latter feature not tested so far).

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] xircom_cb: wire up errors from pci_register_driver()
Alexey Dobriyan [Tue, 15 Aug 2006 06:00:28 +0000]
[PATCH] xircom_cb: wire up errors from pci_register_driver()

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] s390: fix arp_tbl lock usage in qeth
Heiko Carstens [Tue, 15 Aug 2006 06:00:27 +0000]
[PATCH] s390: fix arp_tbl lock usage in qeth

qeth: bhs must be disabled when accessing neighbour tables.

=================================
[ INFO: inconsistent lock state ]

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] skge: remember to run netif_poll_disable()
Edgar E. Iglesias [Tue, 15 Aug 2006 06:00:24 +0000]
[PATCH] skge: remember to run netif_poll_disable()

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com>
Cc: Stephen Hemminger <shemminger@osdl.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] Add ethtool -g support to Spidernet network driver
Jim Lewis [Tue, 15 Aug 2006 06:00:23 +0000]
[PATCH] Add ethtool -g support to Spidernet network driver

Add ethtool -g (show ring sizes) support to the Spidernet network driver.

Signed-off-by: James K Lewis <jklewis@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] build fixes: smc91x
David Brownell [Tue, 15 Aug 2006 06:00:22 +0000]
[PATCH] build fixes: smc91x

Unclear how these bugs arrived, presumably from incorrect cleanup of
the 16-bit-only paths, but smc91x wouldn't build for OMAP.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Nicolas Pitre <nico@cam.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] via-rhine: add option avoid_D3 (work around broken BIOSes)
Roger Luethi [Tue, 15 Aug 2006 06:00:21 +0000]
[PATCH] via-rhine: add option avoid_D3 (work around broken BIOSes)

It looks like broken BIOSes controlling Rhine chips will remain in use in
significant numbers; such systems fail to come up via PXE after they have
been put into D3 (power-saving) mode.

This patch adds a module option for disabling the call that puts the chip
to sleep.

Signed-off-by: Roger Luethi <rl@hellgate.ch>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Joerg Bashir <brak@archive.org>
Cc: Tim Phipps <tim@phipps-hutton.freeserve.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[PATCH] lockdep: fix smc91x
Russell King [Tue, 15 Aug 2006 06:00:20 +0000]
[PATCH] lockdep: fix smc91x

When booting using root-nfs, I'm seeing (independently) two lockdep dumps
in the smc91x driver.  The patch below fixes both.  Both dumps look like
real locking issues.

Nico - please review and ack if you think the patch is correct.

Dump 1:

Sending DHCP requests .
=================================
[ INFO: inconsistent lock state ]

Signed-off-by: Jeff Garzik <jeff@garzik.org>