9 years agollc: add support for LLC_OPT_PKTINFO
Octavian Purdila [Sat, 26 Dec 2009 11:51:00 +0000]
llc: add support for LLC_OPT_PKTINFO

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agollc: use dev_hard_header
Octavian Purdila [Sat, 26 Dec 2009 11:50:59 +0000]
llc: use dev_hard_header

Using dev_hard_header allows us to use LLC with VLANs and potentially
other Ethernet/TokernRing specific encapsulations. It also removes code
duplication between LLC and Ethernet/TokenRing core code.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agowireless: fix comments in genregdb.awk
John W. Linville [Sat, 26 Dec 2009 00:35:43 +0000]
wireless: fix comments in genregdb.awk

Apparently some awk versions choke on C-style comments -- who knew? :-)

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Sat, 26 Dec 2009 00:34:56 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6

9 years agoenic: whitespace cleanup; #define cleanup; more verbose err msg
Scott Feldman [Wed, 23 Dec 2009 13:27:59 +0000]
enic: whitespace cleanup; #define cleanup; more verbose err msg

Some misc changes to cleanup whitespace issues and fix/remove some #define
HW defintions.

1) fix some whitespace issues
2) more verbose err msg when resources aren't available to configure vnic
3) remove unused #define
4) fix RSS #define rss hash types

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoenic: feature add: add ethtool -c/C support
Scott Feldman [Wed, 23 Dec 2009 13:27:54 +0000]
enic: feature add: add ethtool -c/C support

Only rx_usec and tx_usec options for ethtool -C are settable as those
are the only settings that make sense to HW.  Adds driver reporting of
intr coalescing timer value in usec units rather than HW units.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoenic: Bug fix: align desc ring sizes to 32 descs
Scott Feldman [Wed, 23 Dec 2009 13:27:48 +0000]
enic: Bug fix: align desc ring sizes to 32 descs

Previous driver was aligning ring sizes to 16 descs, but hardware actually
wants desc ring sizes to be aligned to 32 descs.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoenic: minimize pkt filter updates to firmware
Scott Feldman [Wed, 23 Dec 2009 13:27:43 +0000]
enic: minimize pkt filter updates to firmware

In set_multicast(), only push pkt filter changes down to firmware if
pkt filter actually changes.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoenic: Bug fix: try harder to fill Rx ring on skb allocation failures
Scott Feldman [Wed, 23 Dec 2009 13:27:38 +0000]
enic: Bug fix: try harder to fill Rx ring on skb allocation failures

During dev->open(), make sure we get at least one skb on the Rx ring.
Otherwise abort the interface load.  Also, if we get skb allocation
failures in NAPI poll while trying to replenish the ring, try again
later so we don't end up starving out the Rx ring completely.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoenic: Bug fix: use safe queue shutdown in dev->stop
Scott Feldman [Wed, 23 Dec 2009 13:27:30 +0000]
enic: Bug fix: use safe queue shutdown in dev->stop

Fix dev->stop shutdown bug where driver was stopping xmit queue and then
disabling intrs.  Fix is to disable intrs first and then stop the xmit
queue, otherwise an interrupt could cause the queue to be rewoken.  Also,
no need to explicitly do queue servicing because queues are cleaned and
reset back to initial state at end of dev->stop.  Servicing queues also
had the side-effect of also rewakening the xmit queue, which is not what
we want.

Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoiwmc3200top: simplify imwct_tx
Tomas Winkler [Wed, 16 Dec 2009 04:26:26 +0000]
iwmc3200top: simplify imwct_tx

1. remove address argument since we use same address IWMC_SDIO_DATA_ADDR in
    all cases
2. add __iwmct_tx - non locking tx function for already locked contexts

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoiwmc3200top: cleanup log messages
Tomas Winkler [Wed, 16 Dec 2009 04:26:25 +0000]
iwmc3200top: cleanup log messages

1. add TRACE level
2. use TRACE where needed to reduce the noise
3  don't INFOEX from driver
4. add DUMP level for packets dumps
5. use correct context for the log messages

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoiwmc3200top: clean up fw_download
Tomas Winkler [Wed, 16 Dec 2009 04:26:24 +0000]
iwmc3200top: clean up fw_download

1. removed redundant NULL-pointers checks in iwmct_fw_load
as release_firmware and kfree are NULL pointer friendly
2. remove redundant memset of the parser since the structure
is fully initialized in iwmct_fw_parser_init function

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Add rtnetlink init_rcvwnd to set the TCP initial receive window
laurent chavey [Tue, 15 Dec 2009 11:15:28 +0000]
net: Add rtnetlink init_rcvwnd to set the TCP initial receive window

Add rtnetlink init_rcvwnd to set the TCP initial receive window size
advertised by passive and active TCP connections.
The current Linux TCP implementation limits the advertised TCP initial
receive window to the one prescribed by slow start. For short lived
TCP connections used for transaction type of traffic (i.e. http
requests), bounding the advertised TCP initial receive window results
in increased latency to complete the transaction.
Support for setting initial congestion window is already supported
using rtnetlink init_cwnd, but the feature is useless without the
ability to set a larger TCP initial receive window.
The rtnetlink init_rcvwnd allows increasing the TCP initial receive
window, allowing TCP connection to advertise larger TCP receive window
than the ones bounded by slow start.

Signed-off-by: Laurent Chavey <chavey@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: release dst entry while cache-hot for GSO case too
Krishna Kumar [Wed, 9 Dec 2009 20:59:58 +0000]
net: release dst entry while cache-hot for GSO case too

Non-GSO code drops dst entry for performance reasons, but
the same is missing for GSO code. Drop dst while cache-hot
for GSO case too.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: Slightly optimize tcp_sendmsg
Krishna Kumar [Thu, 10 Dec 2009 07:16:59 +0000]
tcp: Slightly optimize tcp_sendmsg

Slightly optimize tcp_sendmsg since NETIF_F_SG is used many
times iteratively in the loop. The only other modification is
to change:
} else if (i == MAX_SKB_FRAGS ||
   (!i &&
   !(sk->sk_route_caps & NETIF_F_SG))) {
to:
} else if (i == MAX_SKB_FRAGS || !sg) {

The reason why this change is correct: this code (other than
the MAX_SKB_FRAGS case) executes only due to the else part
of: "if (skb_tailroom(skb) > 0) {" - i.e. there was no space
in the skb to put the data inline. Hence SG is false is a
sufficient condition, and there is no way a fragment can be
added to the skb.

Changelog:
- Added the above explanation for the change

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: Remove unrequired operations in tcp_push()
Krishna Kumar [Thu, 10 Dec 2009 07:16:52 +0000]
tcp: Remove unrequired operations in tcp_push()

Remove unrequired operations in tcp_push()

Changelog:
Removed a temporary skb variable from tcp_push()

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: Remove check in __tcp_push_pending_frames
Krishna Kumar [Tue, 8 Dec 2009 22:26:13 +0000]
tcp: Remove check in __tcp_push_pending_frames

tcp_push checks tcp_send_head and calls __tcp_push_pending_frames,
which again checks tcp_send_head, and this unnecessary check is
done for every other caller of __tcp_push_pending_frames.

Remove tcp_send_head check in __tcp_push_pending_frames and add
the check to tcp_push_pending_frames. Other functions call
__tcp_push_pending_frames only when tcp_send_head would evaluate
to true.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: fix unified fw size check
Amit Kumar Salecha [Tue, 8 Dec 2009 20:40:57 +0000]
netxen: fix unified fw size check

o Unified firmware image size can be < 1 MB

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: support pci error handlers
Amit Kumar Salecha [Tue, 8 Dec 2009 20:40:56 +0000]
netxen: support pci error handlers

o Support pci error detection and recovery.
o Refactor suspend and resume code, to share with io_error_detected,
  and slot_reset callbacks
o NX_NEED_AER device state added, to synchronize with firmware
  recovery.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: fix tx timeout recovery
Amit Kumar Salecha [Tue, 8 Dec 2009 20:40:55 +0000]
netxen: fix tx timeout recovery

o In case of tx timeout, firmare may be healthy, but some pci-func may
  see no response from it. Force firmware reset, if some pci-func
  explicitly requests so.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: minor suspend resume fixes
Amit Kumar Salecha [Tue, 8 Dec 2009 20:40:54 +0000]
netxen: minor suspend resume fixes

o pci device should be disable at the end and it should be enable first.
o Interface should be attached(netif_device_attach()) irrespective
  of its state.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Wed, 23 Dec 2009 22:09:17 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 23 Dec 2009 21:35:19 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (30 commits)
  USB: Fix a bug on appledisplay.c regarding signedness
  USB: option: support hi speed for modem Haier CE100
  USB: audio gadget: free alsa devices when unloading
  USB: audio gadget: fix wTotalLength calculation
  usb: otg: isp1301_omap: fix compile error
  USB: musb: workaround Blackfin FIFO anomalies
  USB: musb: Fix array index out of bounds issue
  USB: musb: Fix null pointer dereference issue
  USB: musb: correct DMA address for tx
  USB: musb: gadget_ep0: avoid SetupEnd interrupt
  USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled
  USB: musb: do not work if no gadget driver is loaded
  USB: musb: gadget: set otg tranceiver to idle when registering gadget
  USB: musb: Populate the VBUS GPIO with the correct GPIO number
  USB: musb: MAINTAINERS: Fix my tree's address
  USB: musb: fix compiling warning with min() macro
  USB: musb: move musb_remove to __exit
  USB: musb_gadget: fix kernel oops in txstate()
  USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header
  USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header
  ...

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Wed, 23 Dec 2009 21:35:03 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  devtmpfs: unlock mutex in case of string allocation error
  Driver core: export platform_device_register_data as a GPL symbol
  driver core: Prevent reference to freed memory on error path
  Driver-core: Fix bogus 0 error return in device_add()
  Driver core: driver_attribute parameters can often be const*
  Driver core: bin_attribute parameters can often be const*
  Driver core: device_attribute parameters can often be const*
  Doc/stable rules: add new cherry-pick logic
  vfs: get_sb_single() - do not pass options twice
  devtmpfs: Convert dirlock to a mutex

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Wed, 23 Dec 2009 21:34:26 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging/vt66*: kconfig, depends on WLAN
  Staging: batman-adv: introduce missing kfree
  Staging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET.
  Staging: panel: Adjust range for PANEL_KEYPAD in Kconfig
  Staging: panel: Fix compilation error with custom lcd charset
  Staging: ramzswap: remove ARM specific d-cache hack
  Staging: rtl8192x: fix printk formats
  Staging: wlan-ng: fix Correct size given to memset
  staging: rtl8192su: add USB VID/PID for HWNUm-300
  staging: fix rtl8192su compilation errors with mac80211
  staging: fix rtl8192e compilation errors with mac80211
  Staging: fix rtl8187se compilation errors with mac80211
  Staging: rtl8192su: fix test for negative error in rtl8192_rx_isr()
  Staging: comedi: jr3_pci: Don't ioremap too much space. Check result.
  Staging: comedi: removed "depricated" from COMEDI_CB_BLOCK
  Staging: comedi: usbdux.c: fix locking up of the driver when the comedi ringbuffer runs empty
  Staging: dst: remove from the tree
  Staging: sm7xx: add a new framebuffer driver
  Staging: batman: fix debug Kconfig option

9 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Wed, 23 Dec 2009 21:33:07 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Set i_nlink properly during reflink.
  ocfs2: Add reflinked file's inode to inode hash eariler.
  ocfs2: refcounttree.c cleanup.
  ocfs2: Find proper end cpos for a leaf refcount block.

9 years agoUSB: Fix a bug on appledisplay.c regarding signedness
pancho horrillo [Wed, 23 Dec 2009 10:09:13 +0000]
USB: Fix a bug on appledisplay.c regarding signedness

brightness status is reported by the Apple Cinema Displays as an
'unsigned char' (u8) value, but the code used 'char' instead.

Note that he driver was developed on the PowerPC architecture,
where the two types are synonymous, which is not always the case.

Fixed that.  Otherwise the driver will interpret brightness
levels > 127 as negative, and fail to load.

Signed-off-by: pancho horrillo <pancho@pancho.name>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: option: support hi speed for modem Haier CE100
Donny Kurnia [Wed, 23 Dec 2009 12:03:12 +0000]
USB: option: support hi speed for modem Haier CE100

I made this patch for usbserial driver to add the support for EVDO modem
Haier CE100. The bugs report for this is here:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/490068

This patch based on these post:
http://blankblondtank.wordpress.com/2009/09/04/mengoptimalkan-koneksi-modem-haier-ce-100-cdma-di-linux/
http://tantos.web.id/blogs/how-to-internet-connection-using-cdma-evdo-modem-and-karmic-koala-ubuntu-9-10

I hope this patch can help other that have the Haier C100 modem, mostly in my country, Indonesia.

Signed-off-by: Donny Kurnia <donnykurnia@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: audio gadget: free alsa devices when unloading
Cliff Cai [Thu, 10 Dec 2009 03:28:39 +0000]
USB: audio gadget: free alsa devices when unloading

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: audio gadget: fix wTotalLength calculation
Cliff Cai [Thu, 10 Dec 2009 03:21:12 +0000]
USB: audio gadget: fix wTotalLength calculation

The wTotalLength should contain the sum of the interface and unit
descriptor sizes per the Audio Device Class specification 1.0.

Reported-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agousb: otg: isp1301_omap: fix compile error
Felipe Balbi [Tue, 15 Dec 2009 21:19:52 +0000]
usb: otg: isp1301_omap: fix compile error

commit 91c8a5a9985d5bf9c55f6f82f183f57b050b2a3a broke
compilation of this driver after it introduced
otg_init() as a static inline in <linux/usb/otg.h>

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: workaround Blackfin FIFO anomalies
Bryan Wu [Mon, 21 Dec 2009 14:49:52 +0000]
USB: musb: workaround Blackfin FIFO anomalies

Some of these workarounds are already in place, but labeled as affecting
all BF52x parts.  Since we have official anomaly numbers now, use those
defines.  And since writing to the FIFO has a similar hang issue as reading
from the FIFO, implement the workaround there too when necessary.

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: Fix array index out of bounds issue
Maulik Mankad [Tue, 22 Dec 2009 10:49:53 +0000]
USB: musb: Fix array index out of bounds issue

This patch fixes the below array index out of bounds issue.

Buffer overflow, array index of 'aInfo' may be out of
bounds. Array 'aInfo' of size 78 may use index value(s) 6..84

The data stored in 'aInfo' array exceeds the array size of 78.

This patch increases the size of this array to hold the string
correctly without any memory corruption.

This issue was reported by Klockwork tool.

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: Fix null pointer dereference issue
Maulik Mankad [Tue, 22 Dec 2009 10:48:19 +0000]
USB: musb: Fix null pointer dereference issue

This patch fixes the following NULL pointer dereference issue.

Pointer 'request' returned from call to function 'next_request'
at line 748 may be NULL and may be dereferenced at line 792.

============
Code Snippet
============

748:  request = next_request(musb_ep);
785: if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
csr &= ~(MUSB_RXCSR_AUTOCLEAR
| MUSB_RXCSR_DMAENAB
| MUSB_RXCSR_DMAMODE);
musb_writew(epio, MUSB_RXCSR,
MUSB_RXCSR_P_WZC_BITS | csr);

792:  request->actual += musb_ep->dma->actual_len;

Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: correct DMA address for tx
Cliff Cai [Tue, 22 Dec 2009 02:18:02 +0000]
USB: musb: correct DMA address for tx

Since a DMA transfer may need to be kicked off several times to complete,
the DMA start must include the length that has already been transferred.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: gadget_ep0: avoid SetupEnd interrupt
Sergei Shtylyov [Tue, 15 Dec 2009 11:30:01 +0000]
USB: musb: gadget_ep0: avoid SetupEnd interrupt

Gadget stalling a zero-length SETUP request results in this error message:

SetupEnd came in a wrong ep0stage idle

In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero-
length request.  Add the missing '\n' to the error message itself as well...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled
Swaminathan S [Tue, 15 Dec 2009 11:30:00 +0000]
USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled

Race condition exists between the cppi_interrupt handler and
davinci_interrupt handler w.r.t completing a TX IO.  Since DM646x
has seperate DMA and USB endpoint interrupts cppi_interrupt handler
needs to hold the lock while operating on the endpoint.

Update over previous patch to avoid taking the lock if already
taken.  Tested on DM644x, DM355 and DM646x platforms.

Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: do not work if no gadget driver is loaded
Felipe Balbi [Tue, 15 Dec 2009 11:47:30 +0000]
USB: musb: do not work if no gadget driver is loaded

On OTG and gadget-only configurations, we need a gadget driver
in order to work properly, so avoid changing operation modes
when there's no gadget driver loaded.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: gadget: set otg tranceiver to idle when registering gadget
Arnaud Mandy [Tue, 15 Dec 2009 11:29:58 +0000]
USB: musb: gadget: set otg tranceiver to idle when registering gadget

When registering gadget driver, the state of the transceiver
must be set from undefined (no gadget) to b_idle.

Module unload sets the transceiver state to undefined state.
After the first load/unload pair, the reset irq will be lost.

Signed-off-by: Arnaud Mandy <ext-arnaud.2.mandy@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: Populate the VBUS GPIO with the correct GPIO number
Swaminathan S [Tue, 15 Dec 2009 11:29:57 +0000]
USB: musb: Populate the VBUS GPIO with the correct GPIO number

This fixes a null-pointer dereference bug.

Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: MAINTAINERS: Fix my tree's address
Felipe Balbi [Tue, 15 Dec 2009 09:08:45 +0000]
USB: musb: MAINTAINERS: Fix my tree's address

The tree is now on a new address.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: fix compiling warning with min() macro
Cliff Cai [Tue, 15 Dec 2009 09:08:44 +0000]
USB: musb: fix compiling warning with min() macro

Current musb gadget dma code produces the warning:
drivers/usb/musb/musb_gadget.c: In function 'txstate':
drivers/usb/musb/musb_gadget.c:312: warning: comparison of distinct
                                             pointer types lacks a cast

So switch to min_t(size_t, ...).

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb: move musb_remove to __exit
Felipe Balbi [Tue, 15 Dec 2009 09:08:41 +0000]
USB: musb: move musb_remove to __exit

probe() already was on __init, so moving remove() to __exit.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: musb_gadget: fix kernel oops in txstate()
Sergei Shtylyov [Wed, 16 Dec 2009 17:38:31 +0000]
USB: musb_gadget: fix kernel oops in txstate()

Commit 7723de7e19b744144975a09c81777ec0f14ac5b3 (USB: musb_gadget: remove
pointless loop) included uncalled for (and incorrect) optimization that
might cause a kernel oops in txstate() -- undo it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header
Andreas Mohr [Thu, 17 Dec 2009 10:56:09 +0000]
USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header

This is a (almost) sort-only patch to sort FTDI device
product ID definitions in new ftdi_sio_ids.h header.

Advantage is that new device ID submissions will now have a specific (sorted)
position - less future merge conflicts.

Compile-tested, based on _current_ mainline git.
Minor checkpatch.pl warnings were eliminated whereever it made sense,
very minor text changes.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header
Andreas Mohr [Wed, 16 Dec 2009 20:45:10 +0000]
USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header

This is a strictly move-only patch to relocate all FTDI device
product ID definitions to their own ftdi_sio_ids.h header
(following the usual *_ids.h kernel tree convention, too),
thus correcting the slightly too messy appearance
(crucial driver defines were stuck somewhere in the decaying middle swamp
of the huge existing header).

Compile-tested, based on latest mainline git.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB core: fix recent kernel-doc warnings
Randy Dunlap [Sun, 13 Dec 2009 18:17:16 +0000]
USB core: fix recent kernel-doc warnings

Fix new kernel-doc warnings in usb core:

Warning(drivers/usb/core/usb.c:79): No description found for parameter 'config'
Warning(drivers/usb/core/usb.c:79): No description found for parameter 'iface_num'
Warning(drivers/usb/core/usb.c:79): No description found for parameter 'alt_num'
Warning(drivers/usb/core/hcd.c:1622): No description found for parameter 'udev'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: add device ID for Apple Cinema Display 23in 2007
pancho horrillo [Wed, 2 Dec 2009 19:19:42 +0000]
USB: add device ID for Apple Cinema Display 23in 2007

Hi!

$ lsusb -v
Bus 001 Device 008: ID 05ac:921c Apple, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x05ac Apple, Inc.
  idProduct          0x921c
  bcdDevice            1.15
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 No Subclass
      bInterfaceProtocol      0 None
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      92
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              16

Signed-off-by: pancho horrillo <pancho@pancho.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: fix section mismatch in early ehci dbgp
Jan Beulich [Fri, 20 Nov 2009 13:50:53 +0000]
USB: fix section mismatch in early ehci dbgp

Commit 917778267fbe67703ab7d5c6f0b7a05d4c3df485 removed __init from
ehci_wait_for_port(), but left it in place on ehci_reset_port(), which
is being called from the former function.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: emi62: fix crash when trying to load EMI 6|2 firmware
Clemens Ladisch [Mon, 21 Dec 2009 23:36:44 +0000]
USB: emi62: fix crash when trying to load EMI 6|2 firmware

While converting emi62 to use request_firmware(), the driver was also
changed to use the ihex helper functions.  However, this broke the loading
of the FPGA firmware because the code tries to access the addr field of
the EOF record which works with a plain array that has an empty last
record but not with the ihex helper functions where the end of the data is
signaled with a NULL record pointer, resulting in:

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<f80d248c>] emi62_load_firmware+0x33c/0x740 [emi62]

This can be fixed by changing the loop condition to test the return value
of ihex_next_binrec() directly (like in emi26.c).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Der Mickster <retroeffective@gmail.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: serial: Extra device/vendor ID for mos7840 driver
Blaise Gassend [Fri, 18 Dec 2009 23:23:38 +0000]
USB: serial: Extra device/vendor ID for mos7840 driver

Signed-off-by: Blaise Gassend <blaise.gasend_linux@m4x.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: Fix double-linking of drivers/usb/otg when ULPI is selected
Bill Gatliff [Fri, 18 Dec 2009 15:57:22 +0000]
USB: Fix double-linking of drivers/usb/otg when ULPI is selected

This patch corrects a problem where drivers/usb/otg is linked twice
if CONFIG_USB_ULPI is selected, resulting in a build error (symbol
conflict). The files in that directory are properly linked already
as part of CONFIG_USB, and need not be indicated specifically for
CONFIG_USB_ULPI.

Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: gadget: Use ERR_PTR/IS_ERR
Julia Lawall [Wed, 9 Dec 2009 13:23:32 +0000]
USB: gadget: Use ERR_PTR/IS_ERR

Use ERR_PTR and IS_ERR rather than mixing integers and pointers.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *E;
@@

* E < 0
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: fix bugs in usb_(de)authorize_device
Alan Stern [Tue, 8 Dec 2009 20:54:44 +0000]
USB: fix bugs in usb_(de)authorize_device

This patch (as1315) fixes some bugs in the USB core authorization
code:

usb_deauthorize_device() should deallocate the device strings
instead of leaking them, and it should invoke
usb_destroy_configuration() (which does proper reference
counting) instead of freeing the config information directly.

usb_authorize_device() shouldn't change the device strings
until it knows that the authorization will succeed, and it should
autosuspend the device at the end (having autoresumed the
device at the start).

Because the device strings can be changed, the sysfs routines
to display the strings must protect the string pointers by
locking the device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Acked-by: David Vrabel <david.vrabel@csr.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: rename usb_configure_device
Alan Stern [Tue, 8 Dec 2009 20:50:41 +0000]
USB: rename usb_configure_device

This patch (as1314) renames usb_configure_device() and
usb_configure_device_otg() in the hub driver.  Neither name is
appropriate because these routines enumerate devices, they don't
configure them.  That's handled by usb_choose_configuration() and
usb_set_configuration().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: power management documentation update
Alan Stern [Tue, 8 Dec 2009 20:49:48 +0000]
USB: power management documentation update

This patch (as1313) updates the documentation concerning USB power
management.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging/vt66*: kconfig, depends on WLAN
Randy Dunlap [Mon, 14 Dec 2009 16:44:46 +0000]
Staging/vt66*: kconfig, depends on WLAN

The vt665[56] drivers can be built when CONFIG_NET=n &
CONFIG_NETDEVICES=n or just when CONFIG_WLAN=n.
This leads to build failures.
Prevent this by making them depend on WLAN.

[This patch was lost in a dualing trees merge;
still needs to be re-applied.]

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: batman-adv: introduce missing kfree
Julia Lawall [Sun, 13 Dec 2009 13:11:39 +0000]
Staging: batman-adv: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.
Similarly for usb-alloc urb.

The semantic match that finds the first problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET.
Andrew Lunn [Sat, 12 Dec 2009 22:39:47 +0000]
Staging: batman-adv: Add Kconfig dependancies on PROC_FS and PACKET.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: panel: Adjust range for PANEL_KEYPAD in Kconfig
Peter Huewe [Tue, 15 Dec 2009 05:37:36 +0000]
Staging: panel: Adjust range for PANEL_KEYPAD in Kconfig

In panel.c there are only the values 0-3 defined. So 4 is invalid:

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: panel: Fix compilation error with custom lcd charset
Peter Huewe [Tue, 15 Dec 2009 05:21:45 +0000]
Staging: panel: Fix compilation error with custom lcd charset

When compiling panel.c with a DEFAULT_LCD_CHARSET it fails to compile
with the following error message:
drivers/staging/panel/panel.c: In function >>lcd_init<<:
drivers/staging/panel/panel.c:1396: error: expected expression before
>>;<< token
drivers/staging/panel/panel.c:1475: error: expected expression before
>>;<< token
make[3]: *** [drivers/staging/panel/panel.o] error 1
make[2]: *** [drivers/staging/panel] error 2
make[1]: *** [drivers/staging] error 2

The config used was:
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=0
CONFIG_PANEL_KEYPAD=0
CONFIG_PANEL_LCD=1
CONFIG_PANEL_LCD_HEIGHT=2
CONFIG_PANEL_LCD_WIDTH=20
CONFIG_PANEL_LCD_BWIDTH=40
CONFIG_PANEL_LCD_HWIDTH=64
CONFIG_PANEL_LCD_CHARSET=0
CONFIG_PANEL_LCD_PROTO=0
CONFIG_PANEL_LCD_PIN_E=14
CONFIG_PANEL_LCD_PIN_RS=17
CONFIG_PANEL_LCD_PIN_RW=16
CONFIG_PANEL_LCD_PIN_BL=0

This patch fixes both errors, as it fixes the define
Patch against current linux-next tree at Tue Dec 15 06:07:01 2009 +0100

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: ramzswap: remove ARM specific d-cache hack
Nitin Gupta [Sat, 12 Dec 2009 06:14:46 +0000]
Staging: ramzswap: remove ARM specific d-cache hack

Remove d-cache hack in ramzswap driver that was needed
to workaround a bug in ARM version of update_mmu_cache()
which caused stale data in d-cache to be transferred to
userspace. This bug was fixed by git commit:
787b2faadc4356b6c2c71feb42fb944fece9a12f
This also brings down one entry in TODO file.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: rtl8192x: fix printk formats
Randy Dunlap [Tue, 24 Nov 2009 20:13:55 +0000]
Staging: rtl8192x: fix printk formats

Fix printk format warnings in rtl8192[eu]:

drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c:979: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:385: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:484: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192e/ieee80211/rtl819x_BAProc.c:614: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c:848: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:343: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:442: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c:572: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: wlan-ng: fix Correct size given to memset
Julia Lawall [Wed, 9 Dec 2009 19:25:04 +0000]
Staging: wlan-ng: fix Correct size given to memset

Memset should be given the size of the structure, not the size of the pointer.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T *x;
expression E;
@@

memset(x, E, sizeof(
+ *
 x))
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agostaging: rtl8192su: add USB VID/PID for HWNUm-300
Stephane Glondu [Thu, 17 Dec 2009 14:41:23 +0000]
staging: rtl8192su: add USB VID/PID for HWNUm-300

The Hercules Wireless N USB mini (HWNUm-300) uses the RTL8191S chipset
and seems to work with this driver.

Signed-off-by: Stephane Glondu <steph@glondu.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agostaging: fix rtl8192su compilation errors with mac80211
George Kadianakis [Wed, 16 Dec 2009 23:19:13 +0000]
staging: fix rtl8192su compilation errors with mac80211

This patch series fixes compilation problems that were caused by
function naming conflicts between the rtl8192su driver and the
mac80211 stack.

Signed-off-by: George Kadianakis <desnacked at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agostaging: fix rtl8192e compilation errors with mac80211
George Kadianakis [Wed, 16 Dec 2009 23:18:08 +0000]
staging: fix rtl8192e compilation errors with mac80211

This patch series fixes compilation problems that were caused by
function naming conflicts between the rtl8192e driver and the
mac80211 stack.

Signed-off-by: George Kadianakis <desnacked at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: fix rtl8187se compilation errors with mac80211
George Kadianakis [Wed, 16 Dec 2009 23:16:00 +0000]
Staging: fix rtl8187se compilation errors with mac80211

This patch fixes compilation problems that were caused by function
naming conflicts between the rtl8187se driver and the mac80211 stack.

Signed-off-by: George Kadianakis <desnacked at gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: rtl8192su: fix test for negative error in rtl8192_rx_isr()
Roel Kluin [Fri, 20 Nov 2009 19:12:33 +0000]
Staging: rtl8192su: fix test for negative error in rtl8192_rx_isr()

The error tested for is negative

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: comedi: jr3_pci: Don't ioremap too much space. Check result.
Ian Abbott [Mon, 30 Nov 2009 10:59:27 +0000]
Staging: comedi: jr3_pci: Don't ioremap too much space. Check result.

For the JR3/PCI cards, the size of the PCIBAR0 region depends on the
number of channels.  Don't try and ioremap space for 4 channels if the
card has fewer channels.  Also check for ioremap failure.

Thanks to Anders Blomdell for input and Sami Hussein for testing.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: comedi: removed "depricated" from COMEDI_CB_BLOCK
Bernd Porr [Fri, 27 Nov 2009 12:07:48 +0000]
Staging: comedi: removed "depricated" from COMEDI_CB_BLOCK

The flag COMEDI_CB_BLOCK was marked as "depricated in the header file".
However, this flag is important to wake up the data-reader (and writer)
after new data has arrived from(for) the DAQ card.

Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: comedi: usbdux.c: fix locking up of the driver when the comedi ringbuffer...
Bernd Porr [Fri, 27 Nov 2009 12:00:53 +0000]
Staging: comedi: usbdux.c: fix locking up of the driver when the comedi ringbuffer runs empty

Jan-Matthias Braun spotted a bug which locks up the driver when the
comedi ring buffer runs empty and provided a patch. The driver would
still send the data to comedi but the reader won't wake up any more.
What's required is setting the flag COMEDI_CB_BLOCK after new data has
arrived which wakes up the reader and therefore the read() command.

Signed-off-by: Bernd Porr <berndporr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: dst: remove from the tree
Greg Kroah-Hartman [Fri, 18 Dec 2009 17:59:48 +0000]
Staging: dst: remove from the tree

DST is dead, no one is using it and upstream
has abandoned it, so remove it from the tree because
it is not going anywhere.

Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoStaging: sm7xx: add a new framebuffer driver
Wu Zhangjin [Mon, 23 Nov 2009 02:28:24 +0000]
Staging: sm7xx: add a new framebuffer driver

Yeeloong netbook has a sm712 video card, need this driver, but it is not
ready to upstream yet, so, go to drivers/staing at first.

This source code is originally from Silicon Motion Technology Corp, and
maintained at http://dev.lemote.com/code/linux_loongson for YeeLoong
netbook. I have done a lot of cleanups for it and merged it into my git
repository at http://dev.lemote.com/code/rt4ls.

Thanks to Simon for testing it on a little-endian x86 platform.

Thanks to Olivier Croset <olivier.croset@actis-computer.com> for
reporting the problem about __BIG_ENDIAN compiling problem and send a
relative patch.

The suspend/resume and blank support are contributed by Jason from
Silicon Motion Technology.

Tested-by: Simon Braunschmidt <sbraun@emlix.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodevtmpfs: unlock mutex in case of string allocation error
Kay Sievers [Tue, 22 Dec 2009 21:25:16 +0000]
devtmpfs: unlock mutex in case of string allocation error

Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDriver core: export platform_device_register_data as a GPL symbol
Michael Hennerich [Mon, 21 Dec 2009 16:41:08 +0000]
Driver core: export platform_device_register_data as a GPL symbol

This allows MFD's to register/bind drivers for their sub devices while
still being compiled as a module.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodriver core: Prevent reference to freed memory on error path
Phil Carmody [Mon, 14 Dec 2009 18:28:12 +0000]
driver core: Prevent reference to freed memory on error path

priv is drv->p. So only free drv->p after we've finished using priv.

Found using a static code analysis tool

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDriver-core: Fix bogus 0 error return in device_add()
Thomas Gleixner [Thu, 10 Dec 2009 19:32:49 +0000]
Driver-core: Fix bogus 0 error return in device_add()

If device_add() is called with a device which does not have dev->p set
up, then device_private_init() is called. If that succeeds, then the
error variable is set to 0. Now if the dev_name(dev) check further
down fails, then device_add() correctly terminates, but returns 0.
That of course lets the driver progress. If later another driver uses
this half set up device as parent then device_add() of the child
device explodes and renders sysfs completely unusable.

Set the error to -EINVAL if dev_name() check fails.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: "Hans J. Koch" <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDriver core: driver_attribute parameters can often be const*
Phil Carmody [Fri, 18 Dec 2009 13:34:21 +0000]
Driver core: driver_attribute parameters can often be const*

Many struct driver_attribute descriptors are purely read-only
structures, and there's no need to change them. Therefore make
the promise not to, which will let those descriptors be put in
a ro section.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDriver core: bin_attribute parameters can often be const*
Phil Carmody [Fri, 18 Dec 2009 13:34:20 +0000]
Driver core: bin_attribute parameters can often be const*

Many struct bin_attribute descriptors are purely read-only
structures, and there's no need to change them. Therefore
make the promise not to, which will let those descriptors
be put in a ro section.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDriver core: device_attribute parameters can often be const*
Phil Carmody [Fri, 18 Dec 2009 13:34:19 +0000]
Driver core: device_attribute parameters can often be const*

Most device_attributes are const, and are begging to be
put in a ro section. However, the create and remove
file interfaces were failing to propagate the const promise
which the only functions they call offer.

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoDoc/stable rules: add new cherry-pick logic
Sebastian Andrzej Siewior [Sun, 6 Dec 2009 11:24:31 +0000]
Doc/stable rules: add new cherry-pick logic

- it is possible to submit patches for the stable queue without sending
  them directly stable@kernel.org. If the tag (Cc: stable@kernel.org) is
  available in the sign-off area than hpa's script will filter them into
  the stable mailbox once it hits Linus' tree.
- Patches which require others to be applied first can be also specified.
  This was discussued in http://lkml.org/lkml/2009/11/9/474

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Brandon Philips <brandon@ifup.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agovfs: get_sb_single() - do not pass options twice
Kay Sievers [Fri, 18 Dec 2009 20:18:15 +0000]
vfs: get_sb_single() - do not pass options twice

Filesystem code usually destroys the option buffer while
parsing it. This leads to errors when the same buffer is
passed twice. In case we fill a new superblock do not call
remount.

This is needed to quite a warning that the debugfs code
causes every boot.

Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agodevtmpfs: Convert dirlock to a mutex
Thomas Gleixner [Wed, 16 Dec 2009 21:31:33 +0000]
devtmpfs: Convert dirlock to a mutex

devtmpfs has a rw_lock dirlock which serializes delete_path and
create_path.

This code was obviously never tested with the usual set of debugging
facilities enabled. In the dirlock held sections the code calls:

 - vfs functions which take mutexes
 - kmalloc(, GFP_KERNEL)

In both code pathes the might sleep warning triggers and spams dmesg.

Convert the rw_lock to a mutex. There is no reason why this needs to
be a rwlock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Wed, 23 Dec 2009 18:01:20 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add STAC9205 PCI_QUIRK for Dell Vostro 1700
  ASoC: Do not write to invalid registers on the wm9712.
  ALSA: hda - Set mixer name after codec patch
  ASoC: add missing parameter to mx27vis_hifi_hw_free()
  ASoC: sh: FSI:: don't check platform_get_irq's return value against zero
  ALSA: sound/core/pcm_timer.c: use lib/gcd.c
  ALSA: hda - Add MSI blacklist
  ALSA: hda - Add support for the new 27 inch IMacs
  ALSA: hda - Fix NULL dereference with enable_beep=0 option

9 years agoMerge branch 'master' of /home/gregkh/linux/git/torvalds-2.6
Greg Kroah-Hartman [Wed, 23 Dec 2009 18:00:05 +0000]
Merge branch 'master' of /home/gregkh/linux/git/torvalds-2.6

9 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Wed, 23 Dec 2009 17:50:17 +0000]
Merge branch 'fix/hda' into for-linus

9 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Wed, 23 Dec 2009 17:50:13 +0000]
Merge branch 'fix/asoc' into for-linus

9 years agoMerge branch 'fix/misc' into for-linus
Takashi Iwai [Wed, 23 Dec 2009 17:49:55 +0000]
Merge branch 'fix/misc' into for-linus

9 years agoALSA: hda - Add STAC9205 PCI_QUIRK for Dell Vostro 1700
Anisse Astier [Wed, 23 Dec 2009 16:28:45 +0000]
ALSA: hda - Add STAC9205 PCI_QUIRK for Dell Vostro 1700

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agokfifo: fix Error/broken kernel-doc notation
Randy Dunlap [Wed, 23 Dec 2009 17:23:33 +0000]
kfifo: fix Error/broken kernel-doc notation

Fix kernel-doc errors and warnings in new header file kfifo.h.
Don't use kernel-doc "/**" for internal functions whose comments
are not in kernel-doc format.

kernel-doc section header names (like "Note:") must be unique
per function.  Looks like I need to document that.

  Error(include/linux/kfifo.h:76): duplicate section name 'Note'
  Warning(include/linux/kfifo.h:88): Excess function parameter 'size' description in 'INIT_KFIFO'
  Error(include/linux/kfifo.h:101): duplicate section name 'Note'
  Warning(include/linux/kfifo.h:257): No description found for parameter 'fifo'
    (many of this last type, from internal functions)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 23 Dec 2009 17:12:57 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Revert 738d2be, simplify set_task_cpu()

9 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Wed, 23 Dec 2009 17:12:20 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Improve checking of quota file header
  jbd: jbd-debug and jbd2-debug should be writable
  ext4: fix sleep inside spinlock issue with quota and dealloc (#14739)
  ext4: Fix potential quota deadlock
  quota: Fix 64-bit limits setting on 32-bit archs
  ext3: Replace lock/unlock_super() with an explicit lock for resizing
  ext3: Replace lock/unlock_super() with an explicit lock for the orphan list
  ext3: ext3_mark_recovery_complete() doesn't need to use lock_super
  ext3: Remove outdated comment about lock_super()
  quota: Move duplicated code to separate functions
  ext4: Convert to generic reserved quota's space management.
  quota: decouple fs reserved space from quota reservation
  Add unlocked version of inode_add_bytes() function
  ext3: quota macros cleanup [V2]

9 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 23 Dec 2009 16:59:32 +0000]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits)
  drm/radeon/kms: add definitions for v4 power tables
  drm/radeon/kms: never combine LVDS with another encoder
  drm/radeon/kms: Check module arguments to be valid V2
  drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure
  drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4)
  drm/radeon/kms: add 3DC compression support
  drm/radeon/kms: allow rendering while no colorbuffer is set on r300
  drm/radeon/kms: enable memory clock reading on legacy (V2)
  drm/radeon/kms: prevent parallel AtomBIOS calls
  drm/radeon/kms: set proper default tv standard
  drm/radeon/kms: fix legacy rmx
  drm/radeon/kms/atom: fill in proper defines for digital setup
  drm/kms: silencing a false positive warning.
  drm/mm: fix logic for selection of best fit block
  drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.
  drm/vmwgfx: Return -ERESTARTSYS when interrupted by a signal.
  drm/vmwgfx: Fix unlocked ioctl and add proper access control
  drm/radeon: fix build on 64-bit with some compilers.
  drivers/gpu: Use kzalloc for allocating only one thing
  DRM: Rename clamp variable
  ...

9 years agoFix usb_serial_probe() problem introduced by the recent kfifo changes
Stefani Seibold [Wed, 23 Dec 2009 08:10:48 +0000]
Fix usb_serial_probe() problem introduced by the recent kfifo changes

The USB serial code was a new user of the kfifo API, and it was missed
when porting things to the new kfifo API.

Please make the write_fifo in place.  Here is my patch to fix the
regression and full ported version.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoASoC: Do not write to invalid registers on the wm9712.
Eric Millbrandt [Tue, 22 Dec 2009 15:13:24 +0000]
ASoC: Do not write to invalid registers on the wm9712.

This patch fixes a bug where "virtual" registers were being written to the ac97
bus.  This was causing unrelated registers to become corrupted (headphone 0x04,
touchscreen 0x78, etc).

This patch duplicates protection that was included in the wm9713 driver.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

9 years agoquota: Improve checking of quota file header
Jan Kara [Mon, 21 Dec 2009 20:57:04 +0000]
quota: Improve checking of quota file header

When we are asked for vfsv0 quota format and the file is in vfsv1
format (or vice versa), refuse to use the quota file. Also return
with error when we don't like the header of quota file.

Signed-off-by: Jan Kara <jack@suse.cz>

9 years agojbd: jbd-debug and jbd2-debug should be writable
Yin Kangkai [Tue, 15 Dec 2009 22:48:25 +0000]
jbd: jbd-debug and jbd2-debug should be writable

jbd-debug and jbd2-debug is currently read-only (S_IRUGO), which is not
correct. Make it writable so that we can start debuging.

Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext4: fix sleep inside spinlock issue with quota and dealloc (#14739)
Dmitry Monakhov [Thu, 10 Dec 2009 16:36:27 +0000]
ext4: fix sleep inside spinlock issue with quota and dealloc (#14739)

Unlock i_block_reservation_lock before vfs_dq_reserve_block().
This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=14739

CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>