10 years agoclocksource: sh_cmt earlytimer support
Magnus Damm [Wed, 15 Apr 2009 10:50:04 +0000]
clocksource: sh_cmt earlytimer support

Add Early Platform Driver support to the sh_cmt driver
using the earlytimer class.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 17 Apr 2009 23:20:29 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] fix build error on drivers/ata/pata_legacy.c
  pata_via: Cache and rewrite the device bit
  sata_mv: workaround for multi_count errata sata24
  sata_mv: tidy up qc->tf usage in qc_prep() functions

10 years ago[libata] fix build error on drivers/ata/pata_legacy.c
Zhenwen Xu [Fri, 17 Apr 2009 07:32:59 +0000]
[libata] fix build error on drivers/ata/pata_legacy.c

fix those errors:

drivers/ata/pata_legacy.c: In function ‘pdc_data_xfer_vlb’:
drivers/ata/pata_legacy.c:289: error: ‘ap’ undeclared (first use in this function)
drivers/ata/pata_legacy.c:289: error: (Each undeclared identifier is reported only once
drivers/ata/pata_legacy.c:289: error: for each function it appears in.)
drivers/ata/pata_legacy.c: At top level:
drivers/ata/pata_legacy.c:869: error: ‘ATA_PFLAG_PIO32_CHANGE’ undeclared here (not in a
+function)
make[2]: *** [drivers/ata/pata_legacy.o] Error 1
make[1]: *** [drivers/ata] Error 2

Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agopata_via: Cache and rewrite the device bit
Alan Cox [Fri, 17 Apr 2009 11:21:21 +0000]
pata_via: Cache and rewrite the device bit

Some VIA chipsets will reset the DEV bit after IEN changes on ctl. Our
optimised write path avoids doing this but we need to remove the
optimisation on these devices.

[Identified and some original patches proposed by Josehn Chan @ VIA but
discussion then all ground to a halt so given a test case I dug it back out]

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk
Tested-by: Christoph Bisping (bug #13086)
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agosata_mv: workaround for multi_count errata sata24
Mark Lord [Mon, 13 Apr 2009 15:29:34 +0000]
sata_mv: workaround for multi_count errata sata24

Workaround for errata SATA#24 in sata_mv.
This errata affects WRITE_MULTI* commands when
the device multi_count produces a DRQ block size >= 4Kbytes.

We work around it here by converting such operations
into ordinary PIO_WRITEs instead.

Note that this might result in a PIO FUA write unavoidably being converted
into a non-FUA write.  In practice, any system using FUA is also going to be
using DMA rather than PIO, so this shouldn't affect anyone in the real world.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agosata_mv: tidy up qc->tf usage in qc_prep() functions
Mark Lord [Mon, 13 Apr 2009 15:27:18 +0000]
sata_mv: tidy up qc->tf usage in qc_prep() functions

Tidy up qc->tf accesses in the mv_qc_prep() functions.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Fri, 17 Apr 2009 20:53:34 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (43 commits)
  staging: slicoss: update README
  otus/zdusb.c: additional USB idnetifier
  Staging: go7007: fix build issues
  Staging: sxg: Fix leaks and checksum errors in transmit code path
  Staging: sxg: Fix sleep in atomic context warning while loading driver
  Staging: sxg: Use correct queue_id for transmitting non-TCP packets
  Staging: sxg: Fire watchdog timer at end of open routine to change the link
  Staging: Pohmelfs: Add load balancing between network states with the same priority.
  Staging: Pohmelfs: Added IO permissions and priorities.
  Staging: Pohmelfs: Added ->show_stats() callback.
  Staging: Pohmelfs: Drop ftrans debugging code.
  Staging: Pohmelfs: Use wait_on_page_timeout when waiting for remote directory sync instead of hardcoded 25 seconds.
  Staging: Pohmelfs: Reduce debugging noise about non-existing objects.
  Staging: Pohmelfs: Sync fs before killing it, since dentry cache is shrunk before writeback is invoked via generic_shutdown_super()
  Staging: Pohmelfs: Extend remount option.
  Staging: Pohmelfs: Set NETFS_INODE_REMOTE_SYNCED and clear NETFS_INODE_OWNED bits in the root inode.
  Staging: Pohmelfs: Added 'need_lock' variable into debug print.
  Staging: Pohmelfs: Disable read lock in pohmelfs_getattr().
  Staging: Pohmelfs: Move parent lock to the place where we really have to send a lookup request to the server.
  Staging: pohmelfs: Populate dentry cache when receiving the new readdir entry.
  ...

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Fri, 17 Apr 2009 20:53:16 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  UIO: fix specific device driver missing statement for depmod
  Driver core: remove pr_fmt() from dynamic_dev_dbg() printk
  driver core: prevent device_for_each_child from oopsing
  dynamic debug: resurrect old pr_debug() semantics as pr_devel()
  Driver Core: early platform driver
  proc: mounts_poll() make consistent to mdstat_poll
  sysfs: sysfs poll keep the poll rule of regular file.
  driver core: allow non-root users to listen to uevents
  driver core: fix driver_match_device
  sysfs: don't use global workqueue in sysfs_schedule_callback()

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Fri, 17 Apr 2009 20:53:00 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits)
  WUSB: correct format of wusb_chid sysfs file
  WUSB: fix oops when completing URBs for disconnected devices
  WUSB: disconnect all devices when stopping a WUSB HCD
  USB: whci-hcd: check return value of usb_hcd_link_urb_to_ep()
  USB: whci-hcd: provide a endpoint_reset method
  USB: add reset endpoint operations
  USB device codes for Motorola phone.
  usb-storage: fix mistake in Makefile
  USB: usb-serial ch341: support for DTR/RTS/CTS
  Revert USB: usb-serial ch341: support for DTR/RTS/CTS
  USB: musb: fix possible panic while resuming
  USB: musb: fix isochronous TXDMA (take 2)
  USB: musb: sanitize clearing TXCSR DMA bits (take 2)
  USB: musb: bugfixes for multi-packet TXDMA support
  USB: musb_host, fix ep0 fifo flushing
  USB: usb-storage: augment unusual_devs entry for Simple Tech/Datafab
  USB: musb_host, minor enqueue locking fix (v2)
  USB: fix oops in cdc-wdm in case of malformed descriptors
  USB: qcserial: Add extra device IDs
  USB: option: Add ids for D-Link DWM-652 3.5G modem
  ...

10 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Fri, 17 Apr 2009 20:51:14 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (48 commits)
  [ARM] S3C24XX: ADC: Check pending queue before freeing adc client
  [ARM] S3C: Fix ADC driver sparse warning
  [ARM] Osiris: Fix double initialisation in machine block
  [ARM] Anubis: Fix sparse warnings for items that should be static
  [ARM] JIVE: Fix sparse warnings about items which should be static
  [ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'
  [ARM] S3C24XX: Fix sparse error in gpiolib.c
  [ARM] 5455/1: Fix IRQ noise from VIC code
  [ARM] 5454/1: ep93xx_eth: fix sparse warnings
  [ARM] remove .gitignore from include/asm-arm
  Update MAINTAINERS
  mxc defconfig updates
  mx31ads: Mark as having full regulatoion constraints with 1133-EV1 board
  mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board
  Fix ifdef in plat-mxc/irc.c
  MX1ADS: remove I2C ifdefs
  qong: remove AIPS[12] mappings from machine-specific iotable
  mx31ads: imoux pins should be passed in as unsigned int
  MXC: remove orphan imx_init_uart() definition
  mx31: pin definition for csi
  ...

10 years agoMerge branch 'defconfig-s3c2410' of git://aeryn.fluff.org.uk/bjdooks/linux
Russell King [Fri, 17 Apr 2009 20:35:56 +0000]
Merge branch 'defconfig-s3c2410' of git://aeryn.fluff.org.uk/bjdooks/linux

10 years agoMerge branch 'v2630-rc2-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux
Russell King [Fri, 17 Apr 2009 20:35:44 +0000]
Merge branch 'v2630-rc2-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux

10 years agostaging: slicoss: update README
Stephen Hemminger [Wed, 15 Apr 2009 23:52:16 +0000]
staging: slicoss: update README

I looked, I gagged, I left

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agootus/zdusb.c: additional USB idnetifier
Daniele Napolitano [Tue, 14 Apr 2009 23:58:33 +0000]
otus/zdusb.c: additional USB idnetifier

Provide support for WN111v2 USB 802.11n adapter.

Signed-off-by: Daniele Napolitano <dnax88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: go7007: fix build issues
Greg Kroah-Hartman [Mon, 13 Apr 2009 20:16:54 +0000]
Staging: go7007: fix build issues

Now that TUNER_SET_TYPE_ADDR is gone from the tree, the older code kicks
in and tries to use TUNER_SET_TYPE, which went away a long time ago.

This patch removes all of this logic, as it should not be needed anymore
now, and by doing so, fixes the build.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: sxg: Fix leaks and checksum errors in transmit code path
Mithlesh Thukral [Wed, 25 Mar 2009 10:21:49 +0000]
Staging: sxg: Fix leaks and checksum errors in transmit code path

Fix the transmit function for the following:
* Free XmtCmd in the error code path. This use to leak memory in
  error conditions.
* Do pci mapping after the checksum operations are over. They can
  reallocate the skb at a different location.
* Fix UDP checksum errors which were seen in wireshark

Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: sxg: Fix sleep in atomic context warning while loading driver
Mithlesh Thukral [Wed, 25 Mar 2009 10:21:14 +0000]
Staging: sxg: Fix sleep in atomic context warning while loading driver

Leave a spinlock before calling request_irq(). request_irq() calls kmalloc
which can sleep. This was generating a warning dump while driver is loaded.

Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: sxg: Use correct queue_id for transmitting non-TCP packets
Mithlesh Thukral [Wed, 25 Mar 2009 10:20:34 +0000]
Staging: sxg: Use correct queue_id for transmitting non-TCP packets

Use correct queue_id while transmitting non-TCP packets.
They should always use queue 0.

Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>

10 years agoStaging: sxg: Fire watchdog timer at end of open routine to change the link
Mithlesh Thukral [Wed, 25 Mar 2009 10:19:58 +0000]
Staging: sxg: Fire watchdog timer at end of open routine to change the link

The watchdog timer which updates the link status was not fired at the
end of sxg_entry_open(). Add that.

Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Add load balancing between network states with the same priority.
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:30 +0000]
Staging: Pohmelfs: Add load balancing between network states with the same priority.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Added IO permissions and priorities.
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:29 +0000]
Staging: Pohmelfs: Added IO permissions and priorities.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Added ->show_stats() callback.
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:28 +0000]
Staging: Pohmelfs: Added ->show_stats() callback.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Drop ftrans debugging code.
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:27 +0000]
Staging: Pohmelfs: Drop ftrans debugging code.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Use wait_on_page_timeout when waiting for remote directory sync...
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:26 +0000]
Staging: Pohmelfs: Use wait_on_page_timeout when waiting for remote directory sync instead of hardcoded 25 seconds.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Reduce debugging noise about non-existing objects.
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:25 +0000]
Staging: Pohmelfs: Reduce debugging noise about non-existing objects.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Sync fs before killing it, since dentry cache is shrunk before...
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:24 +0000]
Staging: Pohmelfs: Sync fs before killing it, since dentry cache is shrunk before writeback is invoked via generic_shutdown_super()

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Extend remount option.
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:23 +0000]
Staging: Pohmelfs: Extend remount option.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Set NETFS_INODE_REMOTE_SYNCED and clear NETFS_INODE_OWNED bits...
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:22 +0000]
Staging: Pohmelfs: Set NETFS_INODE_REMOTE_SYNCED and clear NETFS_INODE_OWNED bits in the root inode.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Added 'need_lock' variable into debug print.
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:21 +0000]
Staging: Pohmelfs: Added 'need_lock' variable into debug print.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Disable read lock in pohmelfs_getattr().
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:20 +0000]
Staging: Pohmelfs: Disable read lock in pohmelfs_getattr().

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: Pohmelfs: Move parent lock to the place where we really have to send a looku...
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:19 +0000]
Staging: Pohmelfs: Move parent lock to the place where we really have to send a lookup request to the server.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: pohmelfs: Populate dentry cache when receiving the new readdir entry.
Evgeniy Polyakov [Fri, 27 Mar 2009 12:04:18 +0000]
Staging: pohmelfs: Populate dentry cache when receiving the new readdir entry.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoRevert Staging: SLICOSS: use gfp_kernel where possible
Lior Dotan [Wed, 11 Feb 2009 11:35:10 +0000]
Revert Staging: SLICOSS: use gfp_kernel where possible

Revert commit 2bb347361e2c19799431f56488a3f64de40a3aa6

This commit has been reported to cause problems:
  Mar 24 11:50:31 linuxdev kernel: BUG: sleeping function called from invalid context at mm/slub.c:1599 Mar 24 11:50:31 linuxdev kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 3251, name: avahi-daemon

Cc: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: STLC45XX should depend on GENERIC_HARDIRQS
Geert Uytterhoeven [Mon, 6 Apr 2009 13:15:55 +0000]
Staging: STLC45XX should depend on GENERIC_HARDIRQS

m68k allmodconfig:
| drivers/staging/stlc45xx/stlc45xx.c: In function 'stlc45xx_probe':
| drivers/staging/stlc45xx/stlc45xx.c:2456: error: implicit declaration of function 'set_irq_type'
| make[6]: *** [drivers/staging/stlc45xx/stlc45xx.o] Error 1

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: binder: Defer flush and release operations to avoid deadlocks.
Arve Hjønnevåg [Mon, 6 Apr 2009 22:13:00 +0000]
Staging: binder: Defer flush and release operations to avoid deadlocks.

If a transaction that contains a file descriptor fails on a later object,
the new file descriptor needs to be closed. If this is a binder file
descriptor we would deadlock in flush. If there were no other references to
the file at this point release would also be called.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: binder: Prevent the wrong thread from adding a transaction to the stack.
Arve Hjønnevåg [Mon, 6 Apr 2009 22:12:59 +0000]
Staging: binder: Prevent the wrong thread from adding a transaction to the stack.

If a thread is part of a transaction stack, it is only allowed to make
another call if it was the target of the top transaction on the stack.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: binder: Cast to uintptr_t instead of size_t when aligning pointers
Arve Hjønnevåg [Mon, 6 Apr 2009 22:12:58 +0000]
Staging: binder: Cast to uintptr_t instead of size_t when aligning pointers

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: binder: Keep a reference to the files_struct while the driver is mmapped
Arve Hjønnevåg [Mon, 6 Apr 2009 22:12:57 +0000]
Staging: binder: Keep a reference to the files_struct while the driver is mmapped

This prevents breaking fget_light if a single threaded application
allows incoming file descriptors (in replies or on nodes).
Should also prevent inserting a file in the wrong files_struct if the
receving process execs in the middle of a transaction (between
task_get_unused_fd_flags and task_fd_install).

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: binder: Add more offset validation.
Arve Hjønnevåg [Mon, 6 Apr 2009 22:12:56 +0000]
Staging: binder: Add more offset validation.

Check that datasize is not smaller than one flat_binder_object.
Check that offsets are aligned.
Check that offsets_size is aligned.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: binder: mmap fixes.
Arve Hjønnevåg [Mon, 6 Apr 2009 22:12:55 +0000]
Staging: binder: mmap fixes.

Only allow a binder file pointer to be mmapped once. The buffer management
code cannot deal with more then one area.
Also remove leftover mutex_unlock if mmap fails.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: binder: Don't create two proc entries with the same name if the driver is...
Arve Hjønnevåg [Mon, 6 Apr 2009 22:12:54 +0000]
Staging: binder: Don't create two proc entries with the same name if the driver is opened twice in one process.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: binder: Remove VM_EXEC check.
Arve Hjønnevåg [Mon, 6 Apr 2009 22:12:53 +0000]
Staging: binder: Remove VM_EXEC check.

Many platforms do not support mappings without VM_EXEC.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: aten2011: Clean up some tty bits
Alan Cox [Tue, 7 Apr 2009 17:43:43 +0000]
Staging: aten2011: Clean up some tty bits

Minor fixes for tty layer stuff in this driver

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: rt2870: add ID for Sitecom WL-315
Daniele Napolitano [Wed, 1 Apr 2009 21:53:39 +0000]
Staging: rt2870: add ID for Sitecom WL-315

Signed-off-by: Daniele Napolitano <dnax88@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: line6: convert to snd_card_create()
Alexander Beregalov [Sun, 29 Mar 2009 15:59:13 +0000]
Staging: line6: convert to snd_card_create()

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: wlan-ng: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:31:28 +0000]
Staging: wlan-ng: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: sxg: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:30:46 +0000]
Staging: sxg: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: slicoss: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:30:08 +0000]
Staging: slicoss: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: rt3070: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:29:18 +0000]
Staging: rt3070: convert to netdev_ops

Also remove unused variable.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: rt2870: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:28:11 +0000]
Staging: rt2870: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: rt2860: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:27:21 +0000]
Staging: rt2860: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: otus: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:26:25 +0000]
Staging: otus: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: et131x: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:25:33 +0000]
Staging: et131x: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: epl: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:24:32 +0000]
Staging: epl: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoStaging: at76: convert to netdev_ops
Alexander Beregalov [Sun, 29 Mar 2009 15:23:34 +0000]
Staging: at76: convert to netdev_ops

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoWUSB: correct format of wusb_chid sysfs file
David Vrabel [Wed, 8 Apr 2009 17:36:30 +0000]
WUSB: correct format of wusb_chid sysfs file

Make the wusb_chid sysfs file match the ABI documentation.

Print all zeros if the WUSB host is stopped (instead of an empty file)
and end the file with a newline.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoWUSB: fix oops when completing URBs for disconnected devices
David Vrabel [Wed, 8 Apr 2009 17:36:32 +0000]
WUSB: fix oops when completing URBs for disconnected devices

Fix an oops in wusbhc_giveback_urb() if the wusb device had disconnected
while an urb was in progress. Also release the ref count obtained here.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoWUSB: disconnect all devices when stopping a WUSB HCD
David Vrabel [Wed, 8 Apr 2009 17:36:33 +0000]
WUSB: disconnect all devices when stopping a WUSB HCD

Make sure all WUSB devices are disconnected when stopping a WUSB HCD so
that we don't leak the devices' wusb_dev structures.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: whci-hcd: check return value of usb_hcd_link_urb_to_ep()
David Vrabel [Wed, 8 Apr 2009 17:36:31 +0000]
USB: whci-hcd: check return value of usb_hcd_link_urb_to_ep()

Check the return value of usb_hcd_link_urb_to_ep() and do not add the
urb to the ASL/PZL if it returns an error.

Omitting the check results in urbs that appear to be submitted
successfully but then cannot be unliked (because
usb_hcd_check_unlink_urb() returns an error).  This can cause khubd (for
example) to block forever in usb_kill_urb().

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: whci-hcd: provide a endpoint_reset method
David Vrabel [Wed, 8 Apr 2009 17:36:29 +0000]
USB: whci-hcd: provide a endpoint_reset method

Provide a endpoint_reset method to reset sequence number and current
window.  This QHead information can only be changed while the qset is
not in a schedule.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: add reset endpoint operations
David Vrabel [Wed, 8 Apr 2009 17:36:28 +0000]
USB: add reset endpoint operations

Wireless USB endpoint state has a sequence number and a current
window and not just a single toggle bit.  So allow HCDs to provide a
endpoint_reset method and call this or clear the software toggles as
required (after a clear halt, set configuration etc.).

usb_settoggle() and friends are then HCD internal and are moved into
core/hcd.h and all device drivers call usb_reset_endpoint() instead.

If the device endpoint state has been reset (with a clear halt) but
the host endpoint state has not then subsequent data transfers will
not complete. The device will only work again after it is reset or
disconnected.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB device codes for Motorola phone.
Dr. Greg Wettstein [Sat, 11 Apr 2009 14:12:08 +0000]
USB device codes for Motorola phone.

The v950 appears to be a ruggedized version of the Motorola Razor
phone.  Tethering to the phone to use it in 'phone as modem' mode
requires the use of the specialized moto-modem driver which layers
over the usb-serial driver.  Support for the v950 was added simply
adding the device ID's for the phone.

Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agousb-storage: fix mistake in Makefile
Alan Stern [Thu, 9 Apr 2009 18:59:44 +0000]
usb-storage: fix mistake in Makefile

This patch (as1228) fixes a Makefile error introduced when the
subdrivers in usb-storage were split out into separate modules.  The
intention is that when CONFIG_USB_LIBUSUAL is set, libusual.o and
usual-tables.o should be combined into a single object file (called
usb-libusual).  The current Makefile will instead create two separate
objects, and the result won't load properly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: usb-serial ch341: support for DTR/RTS/CTS
Werner Cornelius [Fri, 16 Jan 2009 20:02:41 +0000]
USB: usb-serial ch341: support for DTR/RTS/CTS

commit 664d5df92e88b6ef091048a802b3750f4e989180 upstream.

Fixup of Werner Cornelius patch to the ch341 USB-serial driver, which adds:
- support all baudrates, not just a hard-coded set
- support for controlling DTR, RTS and CTS

Features still missing:
- character length other than 8 bits
- parity settings
- break control

I adapted his patch for the new usb_serial API introduced in 2.6.25-git8 by
Alan Cox on 22 July 2008. Non-compliance to the new API was a reason for
refusing a similar patch from Tollef Fog Heen.

Usage example by Tollef Fog Heen :
        TEMPer USB thermometer <http://err.no/src/TEMPer.c>

based on a patch by:

From: Tollef Fog Heen <tfheen@err.no>

* Implement support for all baud rates rather than just a hard
  coded set.
* Make it possible to control status and control lines
* Grab a bunch of #defines from FreeBSD to reduce the number of
  magic numbers in the file

Signed-off-by: Werner Cornelius <Werner.Cornelius@cornelius-consult.de>
Signed-off-by: Boris Hajduk <boris@hajduk.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Tollef Fog Heen <tfheen@err.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoRevert USB: usb-serial ch341: support for DTR/RTS/CTS
Greg Kroah-Hartman [Tue, 7 Apr 2009 18:56:32 +0000]
Revert USB: usb-serial ch341: support for DTR/RTS/CTS

Reverts commit 664d5df92e88b6ef091048a802b3750f4e989180 as the commit
log information was not complete, and we didn't have a proper
signed-off-by by the author of the original BSD code.

Cc: Werner Cornelius <Werner.Cornelius@cornelius-consult.de>
Cc: Boris Hajduk <boris@hajduk.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb: fix possible panic while resuming
Kim Kyuwon [Fri, 27 Mar 2009 01:56:51 +0000]
USB: musb: fix possible panic while resuming

During driver resume processing, musb could cause a kernel panic.
Fix by enabling the clock earlier, with the resume_early method.

Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb: fix isochronous TXDMA (take 2)
Sergei Shtylyov [Fri, 27 Mar 2009 01:29:19 +0000]
USB: musb: fix isochronous TXDMA (take 2)

Multi-frame isochronous TX URBs transfers in DMA mode never
complete with CPPI DMA because musb_host_tx() doesn't restart
DMA on the second frame, only emitting a debug message.
With Inventra DMA they complete, but in PIO mode.  To fix:

 - Factor out programming of the DMA transfer from
   musb_ep_program() into musb_tx_dma_program();

 - Reorder the code at the end of musb_host_tx() to
   facilitate the fallback to PIO iff DMA fails;

 - Handle the buffer offset consistently for both
   PIO and DMA modes;

 - Add an argument to musb_ep_program() for the same
   reason (it only worked correctly with non-zero
   offset of the first frame in PIO mode);

 - Set the completed isochronous frame descriptor's
   'actual_length' and 'status' fields correctly in
   DMA mode.

Also, since CPPI reportedly doesn't like sending isochronous
packets in the RNDIS mode, change the criterion for this
mode to be used only for multi-packet transfers.  (There's
no need for that mode in the single-packet case anyway.)

[ dbrownell@users.sourceforge.net: split comment paragraph
into bullet list, shrink patch delta, style tweaks ]

Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb: sanitize clearing TXCSR DMA bits (take 2)
Sergei Shtylyov [Fri, 27 Mar 2009 01:27:47 +0000]
USB: musb: sanitize clearing TXCSR DMA bits (take 2)

The MUSB code clears TXCSR_DMAMODE incorrectly in several
places, either asserting that TXCSR_DMAENAB is clear (when
sometimes it isn't) or clearing both bits together.  Recent
versions of the programmer's guide require DMAENAB to be
cleared first, although some older ones didn't.

Fix this and while at it:

 - In musb_gadget::txstate(), stop clearing the AUTOSET
   and DMAMODE bits for the CPPI case since they never
   get set anyway (the former bit is reserved on DaVinci);
   but do clear the DMAENAB bit on the DMA error path.

 - In musb_host::musb_ep_program(), remove the duplicate
   DMA controller specific code code clearing the TXCSR
   previous state, add the code to clear TXCSR DMA bits
   on the Inventra DMA error path, to replace such code
   (executed late) on the PIO path.

 - In musbhsdma::dma_channel_abort()/dma_controller_irq(),
   add/use the 'offset' variable to avoid MUSB_EP_OFFSET()
   invocations on every RXCSR/TXCSR access.

[dbrownell@users.sourceforge.net: don't introduce CamelCase,
shrink diff]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb: bugfixes for multi-packet TXDMA support
Sergei Shtylyov [Fri, 27 Mar 2009 01:26:40 +0000]
USB: musb: bugfixes for multi-packet TXDMA support

We really want to use DMA mode 1 for all multi-packet transfers;
that's one IRQ on DMA completion, instead of one per packet.

There is an important issue with such transfers, especially on
the host side:  when such transfers end with a full-size packet,
we must defer musb_dma_completion() calls until the FIFO empties.
Else we report URB completions too soon, and may clobber data in
the FIFO fifo when writing the next packet (losing data).

The Inventra DMA support uses DMA mode 1, but it ignores that
issue.  The CPPI DMA support uses mode 0, but doesn't handle
its TXPKTRDY interrupts quite right either; it can get stale
"packet ready" interrupts, and report transfer completion too
early using slightly different code paths, also losing data.

So I'm solving it in a generic way -- by adding a sort of the
"interrupt filter" into musb_host_tx(), catching these cases
where a DMA completion IRQ doesn't suffice and removing some
needlessly controller-specific logic.  When a TXDMA interrupt
happens and DMA request mode 1 is active, that filter resets
to mode 0 and defers URB completion processing until TXPKTRDY,
unless the FIFO is already empty.  Related filtering logic in
Inventra and CPPI code gets removed.

Since it should be competely safe now to use the DMA request
mode 1 for host side transfers with the CPPI DMA controller,
set it in musb_h_tx_dma_start() ... now renamed (and shared).

[ dbrownell@users.sourceforge.net: don't introduce more
CamElCase; use more concise explanations ]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb_host, fix ep0 fifo flushing
David Brownell [Fri, 27 Mar 2009 00:38:30 +0000]
USB: musb_host, fix ep0 fifo flushing

The MUSB host side can't share generic TX FIFO flush logic
with EP0; the EP0 TX status register bits are different
from those for other entpoints.

Resolve this issue by providing a new EP0-specific routine
to flush and reset the FIFO, which pays careful attention to
restrictions listed in the latest programmer's guide.  This
gets rid of an open issue whereby the usbtest control write
test (#14) failed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: usb-storage: augment unusual_devs entry for Simple Tech/Datafab
Alan Stern [Tue, 24 Mar 2009 14:39:13 +0000]
USB: usb-storage: augment unusual_devs entry for Simple Tech/Datafab

This patch (as1227) adds the MAX_SECTORS_64 flag to the unusual_devs
entry for the Simple Tech/Datafab controller.  This fixes Bugzilla
#12882.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: binbin <binbinsh@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: musb_host, minor enqueue locking fix (v2)
David Brownell [Fri, 27 Mar 2009 00:36:57 +0000]
USB: musb_host, minor enqueue locking fix (v2)

Someone noted that the enqueue path used an unlocked access
for usb_host_endpoint->hcpriv ... fix that, by being safe
and always accessing it under spinlock protection.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: fix oops in cdc-wdm in case of malformed descriptors
Oliver Neukum [Sat, 4 Apr 2009 07:25:15 +0000]
USB: fix oops in cdc-wdm in case of malformed descriptors

cdc-wdm needs to ignore extremely malformed descriptors.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: qcserial: Add extra device IDs
Matthew Garrett [Sat, 4 Apr 2009 16:24:24 +0000]
USB: qcserial: Add extra device IDs

Add a set of device IDs from the Windows drivers. These aren't complete
(there's a couple of cases where a QDL device is identified without the
associated modem being identified), but it's better than the current
situation.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: option: Add ids for D-Link DWM-652 3.5G modem
Pascal Terjan [Tue, 7 Apr 2009 12:40:42 +0000]
USB: option: Add ids for D-Link DWM-652 3.5G modem

This patch allows D-Link DWM-652 3.5G modem to work.
It is an express card but was only tested with the provided usb adapter as I
don't have machines with express card connector.

/dev/ttyUSB{0,1,2} get created, and using comgt on ttyUSB1 works fine :

[root@plop tmp]# comgt -d /dev/ttyUSB1 -e

Enter PIN number: XXXX
Waiting for Registration..(120 sec max).
Registered on Home network: "Orange France",2
Signal Quality: 15,99

From: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoUSB: ftdi_sio: add vendor/project id for JETI specbos 1201 spectrometer
Peter Korsgaard [Wed, 25 Mar 2009 10:32:59 +0000]
USB: ftdi_sio: add vendor/project id for JETI specbos 1201 spectrometer

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agousb gadget: fix ethernet link reports to ethtool
Jonathan McDowell [Thu, 26 Mar 2009 07:45:27 +0000]
usb gadget: fix ethernet link reports to ethtool

The g_ether USB gadget driver currently decides whether or not there's a
link to report back for eth_get_link based on if the USB link speed is
set. The USB gadget speed is however often set even before the device is
enumerated. It seems more sensible to only report a "link" if we're
actually connected to a host that wants to talk to us. The patch below
does this for me - tested with the PXA27x UDC driver.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 17 Apr 2009 17:08:13 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ads7846 - fix unsafe disable_irq
  Input: mainstone-wm97xx - fix condition in pen_up
  Input: pc110pad - remove unused variable dev
  Input: bf54x-keys - remove depreciated IRQF_SAMPLE_RANDOM flag
  Input: ad7877, ad7879 - remove depreciated IRQF_SAMPLE_RANDOM flag
  Input: da9034-ts - make pen {down,up} events more reliable
  Input: da9034-ts - add Bin Yang as co-author of the driver
  Input: atkbd - add forced release keys quirk for Samsung NC20
  Input: atkbd - add forced release keys quirk for Samsung Q45
  Input: gameport - fix attach driver code
  Input: hp_sdc_rtc should depend on serio
  Input: wm97xx - don't specify IRQF_SAMPLE_RANDOM
  Input: ads7846 - introduce platform specific way to synchronize sampling
  Input: remove unnecessary synchronize_rcu() call
  Input: i8042 - add a DMI table for the i8042.reset option
  Input: i8042 - introduce a tougher reset

10 years agoGet rid of final remnants of include/asm-$(ARCH)
Linus Torvalds [Fri, 17 Apr 2009 16:59:27 +0000]
Get rid of final remnants of include/asm-$(ARCH)

This renames include/asm-h8300/timer.h into arch/h8300/include/asm: it
was left over just because that file had been created in the -mm tree
before the whole h8300 header subdirectory had been moved, and then got
merged in the old location afterwards.

(See commits e0b0f9e4ead2468f84c26332ec42b118e76af572: "h8300: update
timer handler - new files" and 758db3f2118703a1e36374dae5d58bed963e7e0d:
"[h8300] move include/asm-h8300 to arch/h8300/include/asm" for details).

This also removes a left-over .gitignore file in include/asm-arm that
became stale when the ARM header files were moved (which happened in
multiple commits, just see "git log -- include/asm-arm" for details).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev
Linus Torvalds [Fri, 17 Apr 2009 16:57:17 +0000]
Merge branch 'for-linus' of git://linux-m32r.org/git/takata/linux-2.6_dev

* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: move include/asm-m32r/* to arch/m32r/include/asm/
  m32r: move include/asm-m32r headers to arch/m32r/include/asm

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 17 Apr 2009 16:56:11 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix microcode driver newly spewing warnings
  x86, PAT: Remove page granularity tracking for vm_insert_pfn maps
  x86: disable X86_PTRACE_BTS for now
  x86, documentation: kernel-parameters replace X86-32,X86-64 with X86
  x86: pci-swiotlb.c swiotlb_dma_ops should be static
  x86, PAT: Remove duplicate memtype reserve in devmem mmap
  x86, PAT: Consolidate code in pat_x_mtrr_type() and reserve_memtype()
  x86, PAT: Changing memtype to WC ensuring no WB alias
  x86, PAT: Handle faults cleanly in set_memory_ APIs
  x86, PAT: Change order of cpa and free in set_memory_wb
  x86, CPA: Change idmap attribute before ioremap attribute setup

10 years agoAFS: Guard afs_file_readpage_read_complete() definition with CONFIG_AFS_FSCACHE
Matt Kraai [Fri, 17 Apr 2009 11:56:38 +0000]
AFS: Guard afs_file_readpage_read_complete() definition with CONFIG_AFS_FSCACHE

If CONFIG_AFS_FSCACHE is not defined, the following warning is displayed when
fs/afs/file.c is compiled:

 fs/afs/file.c:111: warning: ‘afs_file_readpage_read_complete’ defined but not used

This occurs because all calls to this function are guarded by
CONFIG_AFS_FSCACHE.  Thus, guard its definition as well.

Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agovfat: Note the NLS requirement
Alan Cox [Fri, 17 Apr 2009 11:22:35 +0000]
vfat: Note the NLS requirement

Close bug #4754. Stop people getting into a situation where they can't
get their FAT filesystems to mount as they expect.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agosplice: fix new kernel-doc warnings
Randy Dunlap [Fri, 17 Apr 2009 02:09:55 +0000]
splice: fix new kernel-doc warnings

splice: fix kernel-doc warnings

  Warning(fs/splice.c:617): bad line:
  Warning(fs/splice.c:722): No description found for parameter 'sd'
  Warning(fs/splice.c:722): Excess function parameter 'pipe' description in 'splice_from_pipe_begin'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years ago[ARM] S3C24XX: ADC: Check pending queue before freeing adc client
Ramax Lo [Tue, 14 Apr 2009 15:56:18 +0000]
[ARM] S3C24XX: ADC: Check pending queue before freeing adc client

Check pending queue and remove the adc client being released.

Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years ago[ARM] S3C: Fix ADC driver sparse warning
Ben Dooks [Fri, 17 Apr 2009 11:36:49 +0000]
[ARM] S3C: Fix ADC driver sparse warning

The symbol 's3c_adc_try' in arch/arm/plat-s3c24xx/adc.c
does not need to be exported and thus should be static.

This fixes the following sparse warning:

adc.c:103:6: warning: symbol 's3c_adc_try' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years ago[ARM] Osiris: Fix double initialisation in machine block
Ben Dooks [Fri, 17 Apr 2009 11:36:47 +0000]
[ARM] Osiris: Fix double initialisation in machine block

The .init_machine entry in mach-osiris.c had the same entry
twice, so remove one definition to fix the following warning
from sparse:

mach-osiris.c:416:3: warning: Initializer entry defined twice
mach-osiris.c:418:3:   also defined here

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years ago[ARM] Anubis: Fix sparse warnings for items that should be static
Ben Dooks [Fri, 17 Apr 2009 11:36:46 +0000]
[ARM] Anubis: Fix sparse warnings for items that should be static

Make 'anubis_ide_platdata' statis as it is not used outside
the file it is in, fixing the following sparse warning:

mach-anubis.c:246:27: warning: symbol 'anubis_ide_platdata' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years ago[ARM] JIVE: Fix sparse warnings about items which should be static
Ben Dooks [Fri, 17 Apr 2009 11:36:45 +0000]
[ARM] JIVE: Fix sparse warnings about items which should be static

Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as
they are not exported, and are generating the following sparse
warnings:

mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static?
mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years ago[ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'
Ben Dooks [Fri, 17 Apr 2009 11:36:44 +0000]
[ARM] S3C: Fix sparse warning from missing 's3c_device_hwmon'

Fix the following sparse warning due to s3c_device_hwmon being
missing from <plat/devs.h>

devs.c:380:24: warning: symbol 's3c_device_hwmon' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years ago[ARM] S3C24XX: Fix sparse error in gpiolib.c
Ben Dooks [Fri, 17 Apr 2009 11:36:43 +0000]
[ARM] S3C24XX: Fix sparse error in gpiolib.c

Fix the following sparse error generated by including
<plat/gpio-core.h> instead of <mach/gpio-core.h>

gpiolib.c:78:22: warning: symbol 's3c24xx_gpios' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

10 years agom32r: move include/asm-m32r/* to arch/m32r/include/asm/
Hirokazu Takata [Fri, 17 Apr 2009 01:46:25 +0000]
m32r: move include/asm-m32r/* to arch/m32r/include/asm/

Move remained files, ftrace.h and swab.h, to arch/m32r/include/asm/.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

10 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Apr 2009 01:17:22 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix branch tracer header
  tracing: Fix power tracer header

10 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Apr 2009 01:16:29 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Avoid printing sched_group::__cpu_power for default case
  tracing, sched: mark get_parent_ip() notrace

10 years agom32r: move include/asm-m32r headers to arch/m32r/include/asm
Hirokazu Takata [Thu, 27 Nov 2008 17:46:48 +0000]
m32r: move include/asm-m32r headers to arch/m32r/include/asm

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

10 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Apr 2009 00:56:39 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kernel/softirq.c: fix sparse warning
  rcu: Make hierarchical RCU less IPI-happy

10 years agokernel/softirq.c: fix sparse warning
H Hartley Sweeten [Thu, 16 Apr 2009 23:30:18 +0000]
kernel/softirq.c: fix sparse warning

Fix sparse warning in kernel/softirq.c.

  warning: do-while statement is not a compound statement

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
LKML-Reference: <BD79186B4FD85F4B8E60E381CAEE1909015F9033@mi8nycmail19.Mi8.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoMerge branch 'x86/uv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
Linus Torvalds [Thu, 16 Apr 2009 23:43:20 +0000]
Merge branch 'x86/uv' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86/uv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: UV BAU distribution and payload MMRs
  x86: UV: BAU partition-relative distribution map
  x86, uv: add Kconfig dependency on NUMA for UV systems
  x86: prevent /sys/firmware/sgi_uv from being created on non-uv systems
  x86, UV: Fix for nodes with memory and no cpus
  x86, UV: system table in bios accessed after unmap
  x86: UV BAU messaging timeouts
  x86: UV BAU and nodes with no memory

10 years agoUIO: fix specific device driver missing statement for depmod
Hans J. Koch [Sat, 11 Apr 2009 02:18:25 +0000]
UIO: fix specific device driver missing statement for depmod

On Fri, Apr 10, 2009 at 01:50:50PM -0700, Andrew Morton wrote:
> On Fri, 10 Apr 2009 13:32:01 GMT
> bugzilla-daemon@bugzilla.kernel.org wrote:
>
> > http://bugzilla.kernel.org/show_bug.cgi?id=13059

drivers/uio/uio_cif.c misses a MODULE_DEVICE_TABLE, this fixes it.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

10 years agoDriver core: remove pr_fmt() from dynamic_dev_dbg() printk
Jason Baron [Wed, 8 Apr 2009 16:12:52 +0000]
Driver core: remove pr_fmt() from dynamic_dev_dbg() printk

When pr_fmt() was added to the pr_debug() code, we added it not only to the
dynamic_pr_debug() function, but also to the dynamic_dev_dbg() funciton.
However, dev_dbg() doesn't make use of pr_fmt(), so neither should
dynamic_dev_dbg().

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>